omap2430.c 10.9 KB
Newer Older
F
Felipe Balbi 已提交
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
/*
 * Copyright (C) 2005-2007 by Texas Instruments
 * Some code has been taken from tusb6010.c
 * Copyrights for that are attributable to:
 * Copyright (C) 2006 Nokia Corporation
 * Tony Lindgren <tony@atomide.com>
 *
 * This file is part of the Inventra Controller Driver for Linux.
 *
 * The Inventra Controller Driver for Linux is free software; you
 * can redistribute it and/or modify it under the terms of the GNU
 * General Public License version 2 as published by the Free Software
 * Foundation.
 *
 * The Inventra Controller Driver for Linux is distributed in
 * the hope that it will be useful, but WITHOUT ANY WARRANTY;
 * without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
 * License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with The Inventra Controller Driver for Linux ; if not,
 * write to the Free Software Foundation, Inc., 59 Temple Place,
 * Suite 330, Boston, MA  02111-1307  USA
 *
 */
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/clk.h>
#include <linux/io.h>
34 35
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
F
Felipe Balbi 已提交
36 37 38 39

#include "musb_core.h"
#include "omap2430.h"

40 41 42
struct omap2430_glue {
	struct device		*dev;
	struct platform_device	*musb;
43
	struct clk		*clk;
44 45
};

F
Felipe Balbi 已提交
46 47 48 49 50 51
static struct timer_list musb_idle_timer;

static void musb_do_idle(unsigned long _musb)
{
	struct musb	*musb = (void *)_musb;
	unsigned long	flags;
52
#ifdef CONFIG_USB_MUSB_HDRC_HCD
F
Felipe Balbi 已提交
53
	u8	power;
54
#endif
F
Felipe Balbi 已提交
55 56 57 58
	u8	devctl;

	spin_lock_irqsave(&musb->lock, flags);

D
David Brownell 已提交
59 60
	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);

61
	switch (musb->xceiv->state) {
F
Felipe Balbi 已提交
62 63 64 65 66 67
	case OTG_STATE_A_WAIT_BCON:
		devctl &= ~MUSB_DEVCTL_SESSION;
		musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);

		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
		if (devctl & MUSB_DEVCTL_BDEVICE) {
68
			musb->xceiv->state = OTG_STATE_B_IDLE;
F
Felipe Balbi 已提交
69 70
			MUSB_DEV_MODE(musb);
		} else {
71
			musb->xceiv->state = OTG_STATE_A_IDLE;
F
Felipe Balbi 已提交
72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88
			MUSB_HST_MODE(musb);
		}
		break;
#ifdef CONFIG_USB_MUSB_HDRC_HCD
	case OTG_STATE_A_SUSPEND:
		/* finish RESUME signaling? */
		if (musb->port1_status & MUSB_PORT_STAT_RESUME) {
			power = musb_readb(musb->mregs, MUSB_POWER);
			power &= ~MUSB_POWER_RESUME;
			DBG(1, "root port resume stopped, power %02x\n", power);
			musb_writeb(musb->mregs, MUSB_POWER, power);
			musb->is_active = 1;
			musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
						| MUSB_PORT_STAT_RESUME);
			musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
			usb_hcd_poll_rh_status(musb_to_hcd(musb));
			/* NOTE: it might really be A_WAIT_BCON ... */
89
			musb->xceiv->state = OTG_STATE_A_HOST;
F
Felipe Balbi 已提交
90 91 92 93 94 95 96
		}
		break;
#endif
#ifdef CONFIG_USB_MUSB_HDRC_HCD
	case OTG_STATE_A_HOST:
		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
		if (devctl &  MUSB_DEVCTL_BDEVICE)
97
			musb->xceiv->state = OTG_STATE_B_IDLE;
F
Felipe Balbi 已提交
98
		else
99
			musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
F
Felipe Balbi 已提交
100 101 102 103 104 105 106 107
#endif
	default:
		break;
	}
	spin_unlock_irqrestore(&musb->lock, flags);
}


108
static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout)
F
Felipe Balbi 已提交
109 110 111 112 113 114 115 116 117
{
	unsigned long		default_timeout = jiffies + msecs_to_jiffies(3);
	static unsigned long	last_timer;

	if (timeout == 0)
		timeout = default_timeout;

	/* Never idle if active, or when VBUS timeout is not set as host */
	if (musb->is_active || ((musb->a_wait_bcon == 0)
118
			&& (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
F
Felipe Balbi 已提交
119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140
		DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
		del_timer(&musb_idle_timer);
		last_timer = jiffies;
		return;
	}

	if (time_after(last_timer, timeout)) {
		if (!timer_pending(&musb_idle_timer))
			last_timer = timeout;
		else {
			DBG(4, "Longer idle timer already pending, ignoring\n");
			return;
		}
	}
	last_timer = timeout;

	DBG(4, "%s inactive, for idle timer for %lu ms\n",
		otg_state_string(musb),
		(unsigned long)jiffies_to_msecs(timeout - jiffies));
	mod_timer(&musb_idle_timer, timeout);
}

141
static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
F
Felipe Balbi 已提交
142 143 144 145 146 147 148 149 150 151 152
{
	u8		devctl;
	/* HDRC controls CPEN, but beware current surges during device
	 * connect.  They can trigger transient overcurrent conditions
	 * that must be ignored.
	 */

	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);

	if (is_on) {
		musb->is_active = 1;
153 154
		musb->xceiv->default_a = 1;
		musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
F
Felipe Balbi 已提交
155 156 157 158 159 160 161 162 163 164
		devctl |= MUSB_DEVCTL_SESSION;

		MUSB_HST_MODE(musb);
	} else {
		musb->is_active = 0;

		/* NOTE:  we're skipping A_WAIT_VFALL -> A_IDLE and
		 * jumping right to B_IDLE...
		 */

165 166
		musb->xceiv->default_a = 0;
		musb->xceiv->state = OTG_STATE_B_IDLE;
F
Felipe Balbi 已提交
167 168 169 170 171 172 173 174 175 176 177 178
		devctl &= ~MUSB_DEVCTL_SESSION;

		MUSB_DEV_MODE(musb);
	}
	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);

	DBG(1, "VBUS %s, devctl %02x "
		/* otg %3x conf %08x prcm %08x */ "\n",
		otg_state_string(musb),
		musb_readb(musb->mregs, MUSB_DEVCTL));
}

179
static int omap2430_musb_resume(struct musb *musb);
F
Felipe Balbi 已提交
180

181
static int omap2430_musb_set_mode(struct musb *musb, u8 musb_mode)
F
Felipe Balbi 已提交
182 183 184 185 186 187
{
	u8	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);

	devctl |= MUSB_DEVCTL_SESSION;
	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);

D
David Brownell 已提交
188
	return 0;
F
Felipe Balbi 已提交
189 190
}

191
static int omap2430_musb_init(struct musb *musb)
F
Felipe Balbi 已提交
192 193
{
	u32 l;
194 195 196
	struct device *dev = musb->controller;
	struct musb_hdrc_platform_data *plat = dev->platform_data;
	struct omap_musb_board_data *data = plat->board_data;
F
Felipe Balbi 已提交
197

198 199 200 201 202 203 204 205 206 207
	/* We require some kind of external transceiver, hooked
	 * up through ULPI.  TWL4030-family PMICs include one,
	 * which needs a driver, drivers aren't always needed.
	 */
	musb->xceiv = otg_get_transceiver();
	if (!musb->xceiv) {
		pr_err("HS USB OTG: no transceiver configured\n");
		return -ENODEV;
	}

208
	omap2430_musb_resume(musb);
F
Felipe Balbi 已提交
209

210
	l = musb_readl(musb->mregs, OTG_SYSCONFIG);
F
Felipe Balbi 已提交
211 212 213 214 215 216
	l &= ~ENABLEWAKEUP;	/* disable wakeup */
	l &= ~NOSTDBY;		/* remove possible nostdby */
	l |= SMARTSTDBY;	/* enable smart standby */
	l &= ~AUTOIDLE;		/* disable auto idle */
	l &= ~NOIDLE;		/* remove possible noidle */
	l |= SMARTIDLE;		/* enable smart idle */
217 218 219 220 221 222
	/*
	 * MUSB AUTOIDLE don't work in 3430.
	 * Workaround by Richard Woodruff/TI
	 */
	if (!cpu_is_omap3430())
		l |= AUTOIDLE;		/* enable auto idle */
223
	musb_writel(musb->mregs, OTG_SYSCONFIG, l);
F
Felipe Balbi 已提交
224

225
	l = musb_readl(musb->mregs, OTG_INTERFSEL);
226 227 228 229 230 231 232 233 234

	if (data->interface_type == MUSB_INTERFACE_UTMI) {
		/* OMAP4 uses Internal PHY GS70 which uses UTMI interface */
		l &= ~ULPI_12PIN;       /* Disable ULPI */
		l |= UTMI_8BIT;         /* Enable UTMI  */
	} else {
		l |= ULPI_12PIN;
	}

235
	musb_writel(musb->mregs, OTG_INTERFSEL, l);
F
Felipe Balbi 已提交
236 237 238

	pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
			"sysstatus 0x%x, intrfsel 0x%x, simenable  0x%x\n",
239 240 241 242 243
			musb_readl(musb->mregs, OTG_REVISION),
			musb_readl(musb->mregs, OTG_SYSCONFIG),
			musb_readl(musb->mregs, OTG_SYSSTATUS),
			musb_readl(musb->mregs, OTG_INTERFSEL),
			musb_readl(musb->mregs, OTG_SIMENABLE));
F
Felipe Balbi 已提交
244 245

	if (is_host_enabled(musb))
246
		musb->board_set_vbus = omap2430_musb_set_vbus;
F
Felipe Balbi 已提交
247 248 249 250 251 252

	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);

	return 0;
}

253
static void omap2430_save_context(struct musb *musb)
254
{
255 256
	musb->context.otg_sysconfig = musb_readl(musb->mregs, OTG_SYSCONFIG);
	musb->context.otg_forcestandby = musb_readl(musb->mregs, OTG_FORCESTDBY);
257 258
}

259
static void omap2430_restore_context(struct musb *musb)
260
{
261 262
	musb_writel(musb->mregs, OTG_SYSCONFIG, musb->context.otg_sysconfig);
	musb_writel(musb->mregs, OTG_FORCESTDBY, musb->context.otg_forcestandby);
263 264
}

265
static int omap2430_musb_suspend(struct musb *musb)
F
Felipe Balbi 已提交
266 267 268 269
{
	u32 l;

	/* in any role */
270
	l = musb_readl(musb->mregs, OTG_FORCESTDBY);
F
Felipe Balbi 已提交
271
	l |= ENABLEFORCE;	/* enable MSTANDBY */
272
	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
F
Felipe Balbi 已提交
273

274
	l = musb_readl(musb->mregs, OTG_SYSCONFIG);
F
Felipe Balbi 已提交
275
	l |= ENABLEWAKEUP;	/* enable wakeup */
276
	musb_writel(musb->mregs, OTG_SYSCONFIG, l);
F
Felipe Balbi 已提交
277

278 279
	omap2430_save_context(musb);

280
	otg_set_suspend(musb->xceiv, 1);
F
Felipe Balbi 已提交
281 282 283 284

	return 0;
}

285
static int omap2430_musb_resume(struct musb *musb)
F
Felipe Balbi 已提交
286 287 288
{
	u32 l;

289
	otg_set_suspend(musb->xceiv, 0);
F
Felipe Balbi 已提交
290

291 292
	omap2430_restore_context(musb);

293
	l = musb_readl(musb->mregs, OTG_SYSCONFIG);
F
Felipe Balbi 已提交
294
	l &= ~ENABLEWAKEUP;	/* disable wakeup */
295
	musb_writel(musb->mregs, OTG_SYSCONFIG, l);
F
Felipe Balbi 已提交
296

297
	l = musb_readl(musb->mregs, OTG_FORCESTDBY);
F
Felipe Balbi 已提交
298
	l &= ~ENABLEFORCE;	/* disable MSTANDBY */
299
	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
F
Felipe Balbi 已提交
300 301 302 303

	return 0;
}

304
static int omap2430_musb_exit(struct musb *musb)
F
Felipe Balbi 已提交
305 306
{

307
	omap2430_musb_suspend(musb);
F
Felipe Balbi 已提交
308

309
	otg_put_transceiver(musb->xceiv);
F
Felipe Balbi 已提交
310 311
	return 0;
}
312

313
static const struct musb_platform_ops omap2430_ops = {
314 315 316 317 318 319 320 321 322 323 324
	.init		= omap2430_musb_init,
	.exit		= omap2430_musb_exit,

	.suspend	= omap2430_musb_suspend,
	.resume		= omap2430_musb_resume,

	.set_mode	= omap2430_musb_set_mode,
	.try_idle	= omap2430_musb_try_idle,

	.set_vbus	= omap2430_musb_set_vbus,
};
325 326 327 328 329 330 331

static u64 omap2430_dmamask = DMA_BIT_MASK(32);

static int __init omap2430_probe(struct platform_device *pdev)
{
	struct musb_hdrc_platform_data	*pdata = pdev->dev.platform_data;
	struct platform_device		*musb;
332
	struct omap2430_glue		*glue;
333
	struct clk			*clk;
334 335 336

	int				ret = -ENOMEM;

337 338 339 340 341 342
	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
	if (!glue) {
		dev_err(&pdev->dev, "failed to allocate glue context\n");
		goto err0;
	}

343 344 345
	musb = platform_device_alloc("musb-hdrc", -1);
	if (!musb) {
		dev_err(&pdev->dev, "failed to allocate musb device\n");
346
		goto err1;
347 348
	}

349 350 351 352 353 354 355 356 357 358 359 360 361
	clk = clk_get(&pdev->dev, "ick");
	if (IS_ERR(clk)) {
		dev_err(&pdev->dev, "failed to get clock\n");
		ret = PTR_ERR(clk);
		goto err2;
	}

	ret = clk_enable(clk);
	if (ret) {
		dev_err(&pdev->dev, "failed to enable clock\n");
		goto err3;
	}

362 363 364 365
	musb->dev.parent		= &pdev->dev;
	musb->dev.dma_mask		= &omap2430_dmamask;
	musb->dev.coherent_dma_mask	= omap2430_dmamask;

366 367
	glue->dev			= &pdev->dev;
	glue->musb			= musb;
368
	glue->clk			= clk;
369

370 371
	pdata->platform_ops		= &omap2430_ops;

372
	platform_set_drvdata(pdev, glue);
373 374 375 376 377

	ret = platform_device_add_resources(musb, pdev->resource,
			pdev->num_resources);
	if (ret) {
		dev_err(&pdev->dev, "failed to add resources\n");
378
		goto err4;
379 380 381 382 383
	}

	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
	if (ret) {
		dev_err(&pdev->dev, "failed to add platform_data\n");
384
		goto err4;
385 386 387 388 389
	}

	ret = platform_device_add(musb);
	if (ret) {
		dev_err(&pdev->dev, "failed to register musb device\n");
390
		goto err4;
391 392 393 394
	}

	return 0;

395 396 397 398 399 400
err4:
	clk_disable(clk);

err3:
	clk_put(clk);

401
err2:
402 403
	platform_device_put(musb);

404 405 406
err1:
	kfree(glue);

407 408 409 410 411 412
err0:
	return ret;
}

static int __exit omap2430_remove(struct platform_device *pdev)
{
413
	struct omap2430_glue		*glue = platform_get_drvdata(pdev);
414

415 416
	platform_device_del(glue->musb);
	platform_device_put(glue->musb);
417 418
	clk_disable(glue->clk);
	clk_put(glue->clk);
419
	kfree(glue);
420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445

	return 0;
}

static struct platform_driver omap2430_driver = {
	.remove		= __exit_p(omap2430_remove),
	.driver		= {
		.name	= "musb-omap2430",
	},
};

MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer");
MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
MODULE_LICENSE("GPL v2");

static int __init omap2430_init(void)
{
	return platform_driver_probe(&omap2430_driver, omap2430_probe);
}
subsys_initcall(omap2430_init);

static void __exit omap2430_exit(void)
{
	platform_driver_unregister(&omap2430_driver);
}
module_exit(omap2430_exit);