hid-wiimote-modules.c 8.2 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41
/*
 * Device Modules for Nintendo Wii / Wii U HID Driver
 * Copyright (c) 2011-2013 David Herrmann <dh.herrmann@gmail.com>
 */

/*
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the Free
 * Software Foundation; either version 2 of the License, or (at your option)
 * any later version.
 */

/*
 * Wiimote Modules
 * Nintendo devices provide different peripherals and many new devices lack
 * initial features like the IR camera. Therefore, each peripheral device is
 * implemented as an independent module and we probe on each device only the
 * modules for the hardware that really is available.
 *
 * Module registration is sequential. Unregistration is done in reverse order.
 * After device detection, the needed modules are loaded. Users can trigger
 * re-detection which causes all modules to be unloaded and then reload the
 * modules for the new detected device.
 *
 * wdata->input is a shared input device. It is always initialized prior to
 * module registration. If at least one registered module is marked as
 * WIIMOD_FLAG_INPUT, then the input device will get registered after all
 * modules were registered.
 * Please note that it is unregistered _before_ the "remove" callbacks are
 * called. This guarantees that no input interaction is done, anymore. However,
 * the wiimote core keeps a reference to the input device so it is freed only
 * after all modules were removed. It is safe to send events to unregistered
 * input devices.
 */

#include <linux/device.h>
#include <linux/hid.h>
#include <linux/input.h>
#include <linux/spinlock.h>
#include "hid-wiimote.h"

42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173
/*
 * Keys
 * The initial Wii Remote provided a bunch of buttons that are reported as
 * part of the core protocol. Many later devices dropped these and report
 * invalid data in the core button reports. Load this only on devices which
 * correctly send button reports.
 * It uses the shared input device.
 */

static const __u16 wiimod_keys_map[] = {
	KEY_LEFT,	/* WIIPROTO_KEY_LEFT */
	KEY_RIGHT,	/* WIIPROTO_KEY_RIGHT */
	KEY_UP,		/* WIIPROTO_KEY_UP */
	KEY_DOWN,	/* WIIPROTO_KEY_DOWN */
	KEY_NEXT,	/* WIIPROTO_KEY_PLUS */
	KEY_PREVIOUS,	/* WIIPROTO_KEY_MINUS */
	BTN_1,		/* WIIPROTO_KEY_ONE */
	BTN_2,		/* WIIPROTO_KEY_TWO */
	BTN_A,		/* WIIPROTO_KEY_A */
	BTN_B,		/* WIIPROTO_KEY_B */
	BTN_MODE,	/* WIIPROTO_KEY_HOME */
};

static void wiimod_keys_in_keys(struct wiimote_data *wdata, const __u8 *keys)
{
	input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_LEFT],
							!!(keys[0] & 0x01));
	input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_RIGHT],
							!!(keys[0] & 0x02));
	input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_DOWN],
							!!(keys[0] & 0x04));
	input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_UP],
							!!(keys[0] & 0x08));
	input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_PLUS],
							!!(keys[0] & 0x10));
	input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_TWO],
							!!(keys[1] & 0x01));
	input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_ONE],
							!!(keys[1] & 0x02));
	input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_B],
							!!(keys[1] & 0x04));
	input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_A],
							!!(keys[1] & 0x08));
	input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_MINUS],
							!!(keys[1] & 0x10));
	input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_HOME],
							!!(keys[1] & 0x80));
	input_sync(wdata->input);
}

static int wiimod_keys_probe(const struct wiimod_ops *ops,
			     struct wiimote_data *wdata)
{
	unsigned int i;

	set_bit(EV_KEY, wdata->input->evbit);
	for (i = 0; i < WIIPROTO_KEY_COUNT; ++i)
		set_bit(wiimod_keys_map[i], wdata->input->keybit);

	return 0;
}

static const struct wiimod_ops wiimod_keys = {
	.flags = WIIMOD_FLAG_INPUT,
	.arg = 0,
	.probe = wiimod_keys_probe,
	.remove = NULL,
	.in_keys = wiimod_keys_in_keys,
};

/*
 * Rumble
 * Nearly all devices provide a rumble feature. A small motor for
 * force-feedback effects. We provide an FF_RUMBLE memless ff device on the
 * shared input device if this module is loaded.
 * The rumble motor is controlled via a flag on almost every output report so
 * the wiimote core handles the rumble flag. But if a device doesn't provide
 * the rumble motor, this flag shouldn't be set.
 */

static int wiimod_rumble_play(struct input_dev *dev, void *data,
			      struct ff_effect *eff)
{
	struct wiimote_data *wdata = input_get_drvdata(dev);
	__u8 value;
	unsigned long flags;

	/*
	 * The wiimote supports only a single rumble motor so if any magnitude
	 * is set to non-zero then we start the rumble motor. If both are set to
	 * zero, we stop the rumble motor.
	 */

	if (eff->u.rumble.strong_magnitude || eff->u.rumble.weak_magnitude)
		value = 1;
	else
		value = 0;

	spin_lock_irqsave(&wdata->state.lock, flags);
	wiiproto_req_rumble(wdata, value);
	spin_unlock_irqrestore(&wdata->state.lock, flags);

	return 0;
}

static int wiimod_rumble_probe(const struct wiimod_ops *ops,
			       struct wiimote_data *wdata)
{
	set_bit(FF_RUMBLE, wdata->input->ffbit);
	if (input_ff_create_memless(wdata->input, NULL, wiimod_rumble_play))
		return -ENOMEM;

	return 0;
}

static void wiimod_rumble_remove(const struct wiimod_ops *ops,
				 struct wiimote_data *wdata)
{
	unsigned long flags;

	spin_lock_irqsave(&wdata->state.lock, flags);
	wiiproto_req_rumble(wdata, 0);
	spin_unlock_irqrestore(&wdata->state.lock, flags);
}

static const struct wiimod_ops wiimod_rumble = {
	.flags = WIIMOD_FLAG_INPUT,
	.arg = 0,
	.probe = wiimod_rumble_probe,
	.remove = wiimod_rumble_remove,
};

174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270
/*
 * Battery
 * 1 byte of battery capacity information is sent along every protocol status
 * report. The wiimote core caches it but we try to update it on every
 * user-space request.
 * This is supported by nearly every device so it's almost always enabled.
 */

static enum power_supply_property wiimod_battery_props[] = {
	POWER_SUPPLY_PROP_CAPACITY,
	POWER_SUPPLY_PROP_SCOPE,
};

static int wiimod_battery_get_property(struct power_supply *psy,
				       enum power_supply_property psp,
				       union power_supply_propval *val)
{
	struct wiimote_data *wdata = container_of(psy, struct wiimote_data,
						  battery);
	int ret = 0, state;
	unsigned long flags;

	if (psp == POWER_SUPPLY_PROP_SCOPE) {
		val->intval = POWER_SUPPLY_SCOPE_DEVICE;
		return 0;
	} else if (psp != POWER_SUPPLY_PROP_CAPACITY) {
		return -EINVAL;
	}

	ret = wiimote_cmd_acquire(wdata);
	if (ret)
		return ret;

	spin_lock_irqsave(&wdata->state.lock, flags);
	wiimote_cmd_set(wdata, WIIPROTO_REQ_SREQ, 0);
	wiiproto_req_status(wdata);
	spin_unlock_irqrestore(&wdata->state.lock, flags);

	wiimote_cmd_wait(wdata);
	wiimote_cmd_release(wdata);

	spin_lock_irqsave(&wdata->state.lock, flags);
	state = wdata->state.cmd_battery;
	spin_unlock_irqrestore(&wdata->state.lock, flags);

	val->intval = state * 100 / 255;
	return ret;
}

static int wiimod_battery_probe(const struct wiimod_ops *ops,
				struct wiimote_data *wdata)
{
	int ret;

	wdata->battery.properties = wiimod_battery_props;
	wdata->battery.num_properties = ARRAY_SIZE(wiimod_battery_props);
	wdata->battery.get_property = wiimod_battery_get_property;
	wdata->battery.type = POWER_SUPPLY_TYPE_BATTERY;
	wdata->battery.use_for_apm = 0;
	wdata->battery.name = kasprintf(GFP_KERNEL, "wiimote_battery_%s",
					wdata->hdev->uniq);
	if (!wdata->battery.name)
		return -ENOMEM;

	ret = power_supply_register(&wdata->hdev->dev, &wdata->battery);
	if (ret) {
		hid_err(wdata->hdev, "cannot register battery device\n");
		goto err_free;
	}

	power_supply_powers(&wdata->battery, &wdata->hdev->dev);
	return 0;

err_free:
	kfree(wdata->battery.name);
	wdata->battery.name = NULL;
	return ret;
}

static void wiimod_battery_remove(const struct wiimod_ops *ops,
				  struct wiimote_data *wdata)
{
	if (!wdata->battery.name)
		return;

	power_supply_unregister(&wdata->battery);
	kfree(wdata->battery.name);
	wdata->battery.name = NULL;
}

static const struct wiimod_ops wiimod_battery = {
	.flags = 0,
	.arg = 0,
	.probe = wiimod_battery_probe,
	.remove = wiimod_battery_remove,
};

271 272 273
/* module table */

const struct wiimod_ops *wiimod_table[WIIMOD_NUM] = {
274 275
	[WIIMOD_KEYS] = &wiimod_keys,
	[WIIMOD_RUMBLE] = &wiimod_rumble,
276
	[WIIMOD_BATTERY] = &wiimod_battery,
277
};