rts5227.c 6.6 KB
Newer Older
R
Roger Tseng 已提交
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46
/* Driver for Realtek PCI-Express card reader
 *
 * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2, or (at your option) any
 * later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, see <http://www.gnu.org/licenses/>.
 *
 * Author:
 *   Wei WANG <wei_wang@realsil.com.cn>
 *   No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
 *
 *   Roger Tseng <rogerable@realtek.com>
 *   No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan
 */

#include <linux/module.h>
#include <linux/delay.h>
#include <linux/mfd/rtsx_pci.h>

#include "rtsx_pcr.h"

static int rts5227_extra_init_hw(struct rtsx_pcr *pcr)
{
	u16 cap;

	rtsx_pci_init_cmd(pcr);

	/* Configure GPIO as output */
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02);
	/* Switch LDO3318 source from DV33 to card_3v3 */
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x00);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x01);
	/* LED shine disabled, set initial shine cycle period */
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, OLT_LED_CTL, 0x0F, 0x02);
	/* Configure LTR */
	pcie_capability_read_word(pcr->pci, PCI_EXP_DEVCTL2, &cap);
47
	if (cap & PCI_EXP_DEVCTL2_LTR_EN)
R
Roger Tseng 已提交
48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234
		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LTR_CTL, 0xFF, 0xA3);
	/* Configure OBFF */
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, OBFF_CFG, 0x03, 0x03);
	/* Configure force_clock_req
	 * Maybe We should define 0xFF03 as some name
	 */
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, 0xFF03, 0x08, 0x08);
	/* Correct driving */
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
			SD30_CLK_DRIVE_SEL, 0xFF, 0x96);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
			SD30_CMD_DRIVE_SEL, 0xFF, 0x96);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
			SD30_DAT_DRIVE_SEL, 0xFF, 0x96);

	return rtsx_pci_send_cmd(pcr, 100);
}

static int rts5227_optimize_phy(struct rtsx_pcr *pcr)
{
	/* Optimize RX sensitivity */
	return rtsx_pci_write_phy_register(pcr, 0x00, 0xBA42);
}

static int rts5227_turn_on_led(struct rtsx_pcr *pcr)
{
	return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x02);
}

static int rts5227_turn_off_led(struct rtsx_pcr *pcr)
{
	return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x00);
}

static int rts5227_enable_auto_blink(struct rtsx_pcr *pcr)
{
	return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x08);
}

static int rts5227_disable_auto_blink(struct rtsx_pcr *pcr)
{
	return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x00);
}

static int rts5227_card_power_on(struct rtsx_pcr *pcr, int card)
{
	int err;

	rtsx_pci_init_cmd(pcr);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
			SD_POWER_MASK, SD_PARTIAL_POWER_ON);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
			LDO3318_PWR_MASK, 0x02);
	err = rtsx_pci_send_cmd(pcr, 100);
	if (err < 0)
		return err;

	/* To avoid too large in-rush current */
	udelay(150);

	rtsx_pci_init_cmd(pcr);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
			SD_POWER_MASK, SD_POWER_ON);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
			LDO3318_PWR_MASK, 0x06);
	err = rtsx_pci_send_cmd(pcr, 100);
	if (err < 0)
		return err;

	return 0;
}

static int rts5227_card_power_off(struct rtsx_pcr *pcr, int card)
{
	rtsx_pci_init_cmd(pcr);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
			SD_POWER_MASK | PMOS_STRG_MASK,
			SD_POWER_OFF | PMOS_STRG_400mA);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
			LDO3318_PWR_MASK, 0X00);
	return rtsx_pci_send_cmd(pcr, 100);
}

static int rts5227_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
{
	int err;
	u8 drive_sel;

	if (voltage == OUTPUT_3V3) {
		err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24);
		if (err < 0)
			return err;
		drive_sel = 0x96;
	} else if (voltage == OUTPUT_1V8) {
		err = rtsx_pci_write_phy_register(pcr, 0x11, 0x3C02);
		if (err < 0)
			return err;
		err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C80 | 0x24);
		if (err < 0)
			return err;
		drive_sel = 0xB3;
	} else {
		return -EINVAL;
	}

	/* set pad drive */
	rtsx_pci_init_cmd(pcr);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_CLK_DRIVE_SEL,
			0xFF, drive_sel);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_CMD_DRIVE_SEL,
			0xFF, drive_sel);
	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_DAT_DRIVE_SEL,
			0xFF, drive_sel);
	return rtsx_pci_send_cmd(pcr, 100);
}

static const struct pcr_ops rts5227_pcr_ops = {
	.extra_init_hw = rts5227_extra_init_hw,
	.optimize_phy = rts5227_optimize_phy,
	.turn_on_led = rts5227_turn_on_led,
	.turn_off_led = rts5227_turn_off_led,
	.enable_auto_blink = rts5227_enable_auto_blink,
	.disable_auto_blink = rts5227_disable_auto_blink,
	.card_power_on = rts5227_card_power_on,
	.card_power_off = rts5227_card_power_off,
	.switch_output_voltage = rts5227_switch_output_voltage,
	.cd_deglitch = NULL,
	.conv_clk_and_div_n = NULL,
};

/* SD Pull Control Enable:
 *     SD_DAT[3:0] ==> pull up
 *     SD_CD       ==> pull up
 *     SD_WP       ==> pull up
 *     SD_CMD      ==> pull up
 *     SD_CLK      ==> pull down
 */
static const u32 rts5227_sd_pull_ctl_enable_tbl[] = {
	RTSX_REG_PAIR(CARD_PULL_CTL2, 0xAA),
	RTSX_REG_PAIR(CARD_PULL_CTL3, 0xE9),
	0,
};

/* SD Pull Control Disable:
 *     SD_DAT[3:0] ==> pull down
 *     SD_CD       ==> pull up
 *     SD_WP       ==> pull down
 *     SD_CMD      ==> pull down
 *     SD_CLK      ==> pull down
 */
static const u32 rts5227_sd_pull_ctl_disable_tbl[] = {
	RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55),
	RTSX_REG_PAIR(CARD_PULL_CTL3, 0xD5),
	0,
};

/* MS Pull Control Enable:
 *     MS CD       ==> pull up
 *     others      ==> pull down
 */
static const u32 rts5227_ms_pull_ctl_enable_tbl[] = {
	RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55),
	RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15),
	0,
};

/* MS Pull Control Disable:
 *     MS CD       ==> pull up
 *     others      ==> pull down
 */
static const u32 rts5227_ms_pull_ctl_disable_tbl[] = {
	RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55),
	RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15),
	0,
};

void rts5227_init_params(struct rtsx_pcr *pcr)
{
	pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104;
	pcr->num_slots = 2;
	pcr->ops = &rts5227_pcr_ops;

	pcr->sd_pull_ctl_enable_tbl = rts5227_sd_pull_ctl_enable_tbl;
	pcr->sd_pull_ctl_disable_tbl = rts5227_sd_pull_ctl_disable_tbl;
	pcr->ms_pull_ctl_enable_tbl = rts5227_ms_pull_ctl_enable_tbl;
	pcr->ms_pull_ctl_disable_tbl = rts5227_ms_pull_ctl_disable_tbl;
}