ap_bus.c

/*
 * linux/drivers/s390/crypto/ap_bus.c
 *
 * Copyright (C) 2006 IBM Corporation
 * Author(s): Cornelia Huck <cornelia.huck@de.ibm.com>
 *	      Martin Schwidefsky <schwidefsky@de.ibm.com>
 *	      Ralph Wuerthner <rwuerthn@de.ibm.com>
 *	      Felix Beck <felix.beck@de.ibm.com>
 *
 * Adjunct processor bus.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#define KMSG_COMPONENT "ap"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt

#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/workqueue.h>
#include <linux/slab.h>
#include <linux/notifier.h>
#include <linux/kthread.h>
#include <linux/mutex.h>
#include <asm/reset.h>
#include <asm/airq.h>
#include <asm/atomic.h>
#include <asm/system.h>
#include <asm/isc.h>
#include <linux/hrtimer.h>
#include <linux/ktime.h>

#include "ap_bus.h"

/* Some prototypes. */
static void ap_scan_bus(struct work_struct *);
static void ap_poll_all(unsigned long);
static enum hrtimer_restart ap_poll_timeout(struct hrtimer *);
static int ap_poll_thread_start(void);
static void ap_poll_thread_stop(void);
static void ap_request_timeout(unsigned long);
static inline void ap_schedule_poll_timer(void);
static int __ap_poll_device(struct ap_device *ap_dev, unsigned long *flags);
static int ap_device_remove(struct device *dev);
static int ap_device_probe(struct device *dev);
static void ap_interrupt_handler(void *unused1, void *unused2);
static void ap_reset(struct ap_device *ap_dev);
static void ap_config_timeout(unsigned long ptr);
static int ap_select_domain(void);

/*
 * Module description.
 */
MODULE_AUTHOR("IBM Corporation");
MODULE_DESCRIPTION("Adjunct Processor Bus driver, "
		   "Copyright 2006 IBM Corporation");
MODULE_LICENSE("GPL");

/*
 * Module parameter
 */
int ap_domain_index = -1;	/* Adjunct Processor Domain Index */
module_param_named(domain, ap_domain_index, int, 0000);
MODULE_PARM_DESC(domain, "domain index for ap devices");
EXPORT_SYMBOL(ap_domain_index);

static int ap_thread_flag = 0;
module_param_named(poll_thread, ap_thread_flag, int, 0000);
MODULE_PARM_DESC(poll_thread, "Turn on/off poll thread, default is 0 (off).");

static struct device *ap_root_device = NULL;
static DEFINE_SPINLOCK(ap_device_list_lock);
static LIST_HEAD(ap_device_list);

/*
 * Workqueue & timer for bus rescan.
 */
static struct workqueue_struct *ap_work_queue;
static struct timer_list ap_config_timer;
static int ap_config_time = AP_CONFIG_TIME;
static DECLARE_WORK(ap_config_work, ap_scan_bus);

/*
 * Tasklet & timer for AP request polling and interrupts
 */
static DECLARE_TASKLET(ap_tasklet, ap_poll_all, 0);
static atomic_t ap_poll_requests = ATOMIC_INIT(0);
static DECLARE_WAIT_QUEUE_HEAD(ap_poll_wait);
static struct task_struct *ap_poll_kthread = NULL;
static DEFINE_MUTEX(ap_poll_thread_mutex);
static DEFINE_SPINLOCK(ap_poll_timer_lock);
static void *ap_interrupt_indicator;
static struct hrtimer ap_poll_timer;
/* In LPAR poll with 4kHz frequency. Poll every 250000 nanoseconds.
 * If z/VM change to 1500000 nanoseconds to adjust to z/VM polling.*/
static unsigned long long poll_timeout = 250000;

/* Suspend flag */
static int ap_suspend_flag;
/* Flag to check if domain was set through module parameter domain=. This is
 * important when supsend and resume is done in a z/VM environment where the
 * domain might change. */
static int user_set_domain = 0;
static struct bus_type ap_bus_type;

/**
 * ap_using_interrupts() - Returns non-zero if interrupt support is
 * available.
 */
static inline int ap_using_interrupts(void)
{
	return ap_interrupt_indicator != NULL;
}

/**
 * ap_intructions_available() - Test if AP instructions are available.
 *
 * Returns 0 if the AP instructions are installed.
 */
static inline int ap_instructions_available(void)
{
	register unsigned long reg0 asm ("0") = AP_MKQID(0,0);
	register unsigned long reg1 asm ("1") = -ENODEV;
	register unsigned long reg2 asm ("2") = 0UL;

	asm volatile(
		"   .long 0xb2af0000\n"		/* PQAP(TAPQ) */
		"0: la    %1,0\n"
		"1:\n"
		EX_TABLE(0b, 1b)
		: "+d" (reg0), "+d" (reg1), "+d" (reg2) : : "cc" );
	return reg1;
}

/**
 * ap_interrupts_available(): Test if AP interrupts are available.
 *
 * Returns 1 if AP interrupts are available.
 */
static int ap_interrupts_available(void)
{
	return test_facility(2) && test_facility(65);
}

/**
 * ap_test_queue(): Test adjunct processor queue.
 * @qid: The AP queue number
 * @queue_depth: Pointer to queue depth value
 * @device_type: Pointer to device type value
 *
 * Returns AP queue status structure.
 */
static inline struct ap_queue_status
ap_test_queue(ap_qid_t qid, int *queue_depth, int *device_type)
{
	register unsigned long reg0 asm ("0") = qid;
	register struct ap_queue_status reg1 asm ("1");
	register unsigned long reg2 asm ("2") = 0UL;

	asm volatile(".long 0xb2af0000"		/* PQAP(TAPQ) */
		     : "+d" (reg0), "=d" (reg1), "+d" (reg2) : : "cc");
	*device_type = (int) (reg2 >> 24);
	*queue_depth = (int) (reg2 & 0xff);
	return reg1;
}

/**
 * ap_reset_queue(): Reset adjunct processor queue.
 * @qid: The AP queue number
 *
 * Returns AP queue status structure.
 */
static inline struct ap_queue_status ap_reset_queue(ap_qid_t qid)
{
	register unsigned long reg0 asm ("0") = qid | 0x01000000UL;
	register struct ap_queue_status reg1 asm ("1");
	register unsigned long reg2 asm ("2") = 0UL;

	asm volatile(
		".long 0xb2af0000"		/* PQAP(RAPQ) */
		: "+d" (reg0), "=d" (reg1), "+d" (reg2) : : "cc");
	return reg1;
}

#ifdef CONFIG_64BIT
/**
 * ap_queue_interruption_control(): Enable interruption for a specific AP.
 * @qid: The AP queue number
 * @ind: The notification indicator byte
 *
 * Returns AP queue status.
 */
static inline struct ap_queue_status
ap_queue_interruption_control(ap_qid_t qid, void *ind)
{
	register unsigned long reg0 asm ("0") = qid | 0x03000000UL;
	register unsigned long reg1_in asm ("1") = 0x0000800000000000UL | AP_ISC;
	register struct ap_queue_status reg1_out asm ("1");
	register void *reg2 asm ("2") = ind;
	asm volatile(
		".long 0xb2af0000"		/* PQAP(RAPQ) */
		: "+d" (reg0), "+d" (reg1_in), "=d" (reg1_out), "+d" (reg2)
		:
		: "cc" );
	return reg1_out;
}
#endif

static inline struct ap_queue_status __ap_4096_commands_available(ap_qid_t qid,
								  int *support)
{
	register unsigned long reg0 asm ("0") = 0UL | qid | (1UL << 23);
	register struct ap_queue_status reg1 asm ("1");
	register unsigned long reg2 asm ("2") = 0UL;

	asm volatile(
		".long 0xb2af0000\n"
		"0: la    %1,0\n"
		"1:\n"
		EX_TABLE(0b, 1b)
		: "+d" (reg0), "=d" (reg1), "=d" (reg2)
		:
		: "cc");

	if (reg2 & 0x6000000000000000ULL)
		*support = 1;
	else
		*support = 0;

	return reg1;
}

/**
 * ap_4096_commands_availablen(): Check for availability of 4096 bit RSA
 * support.
 * @qid: The AP queue number
 *
 * Returns 1 if 4096 bit RSA keys are support fo the AP, returns 0 if not.
 */
int ap_4096_commands_available(ap_qid_t qid)
{
	struct ap_queue_status status;
	int i, support = 0;
	status = __ap_4096_commands_available(qid, &support);

	for (i = 0; i < AP_MAX_RESET; i++) {
		switch (status.response_code) {
		case AP_RESPONSE_NORMAL:
			return support;
		case AP_RESPONSE_RESET_IN_PROGRESS:
		case AP_RESPONSE_BUSY:
			break;
		case AP_RESPONSE_Q_NOT_AVAIL:
		case AP_RESPONSE_DECONFIGURED:
		case AP_RESPONSE_CHECKSTOPPED:
		case AP_RESPONSE_INVALID_ADDRESS:
			return 0;
		case AP_RESPONSE_OTHERWISE_CHANGED:
			break;
		default:
			break;
		}
		if (i < AP_MAX_RESET - 1) {
			udelay(5);
			status = __ap_4096_commands_available(qid, &support);
		}
	}
	return support;
}
EXPORT_SYMBOL(ap_4096_commands_available);

/**
 * ap_queue_enable_interruption(): Enable interruption on an AP.
 * @qid: The AP queue number
 * @ind: the notification indicator byte
 *
 * Enables interruption on AP queue via ap_queue_interruption_control(). Based
 * on the return value it waits a while and tests the AP queue if interrupts
 * have been switched on using ap_test_queue().
 */
static int ap_queue_enable_interruption(ap_qid_t qid, void *ind)
{
#ifdef CONFIG_64BIT
	struct ap_queue_status status;
	int t_depth, t_device_type, rc, i;

	rc = -EBUSY;
	status = ap_queue_interruption_control(qid, ind);

	for (i = 0; i < AP_MAX_RESET; i++) {
		switch (status.response_code) {
		case AP_RESPONSE_NORMAL:
			if (status.int_enabled)
				return 0;
			break;
		case AP_RESPONSE_RESET_IN_PROGRESS:
		case AP_RESPONSE_BUSY:
			break;
		case AP_RESPONSE_Q_NOT_AVAIL:
		case AP_RESPONSE_DECONFIGURED:
		case AP_RESPONSE_CHECKSTOPPED:
		case AP_RESPONSE_INVALID_ADDRESS:
			return -ENODEV;
		case AP_RESPONSE_OTHERWISE_CHANGED:
			if (status.int_enabled)
				return 0;
			break;
		default:
			break;
		}
		if (i < AP_MAX_RESET - 1) {
			udelay(5);
			status = ap_test_queue(qid, &t_depth, &t_device_type);
		}
	}
	return rc;
#else
	return -EINVAL;
#endif
}

/**
 * __ap_send(): Send message to adjunct processor queue.
 * @qid: The AP queue number
 * @psmid: The program supplied message identifier
 * @msg: The message text
 * @length: The message length
 * @special: Special Bit
 *
 * Returns AP queue status structure.
 * Condition code 1 on NQAP can't happen because the L bit is 1.
 * Condition code 2 on NQAP also means the send is incomplete,
 * because a segment boundary was reached. The NQAP is repeated.
 */
static inline struct ap_queue_status
__ap_send(ap_qid_t qid, unsigned long long psmid, void *msg, size_t length,
	  unsigned int special)
{
	typedef struct { char _[length]; } msgblock;
	register unsigned long reg0 asm ("0") = qid | 0x40000000UL;
	register struct ap_queue_status reg1 asm ("1");
	register unsigned long reg2 asm ("2") = (unsigned long) msg;
	register unsigned long reg3 asm ("3") = (unsigned long) length;
	register unsigned long reg4 asm ("4") = (unsigned int) (psmid >> 32);
	register unsigned long reg5 asm ("5") = (unsigned int) psmid;

	if (special == 1)
		reg0 |= 0x400000UL;

	asm volatile (
		"0: .long 0xb2ad0042\n"		/* DQAP */
		"   brc   2,0b"
		: "+d" (reg0), "=d" (reg1), "+d" (reg2), "+d" (reg3)
		: "d" (reg4), "d" (reg5), "m" (*(msgblock *) msg)
		: "cc" );
	return reg1;
}

int ap_send(ap_qid_t qid, unsigned long long psmid, void *msg, size_t length)
{
	struct ap_queue_status status;

	status = __ap_send(qid, psmid, msg, length, 0);
	switch (status.response_code) {
	case AP_RESPONSE_NORMAL:
		return 0;
	case AP_RESPONSE_Q_FULL:
	case AP_RESPONSE_RESET_IN_PROGRESS:
		return -EBUSY;
	case AP_RESPONSE_REQ_FAC_NOT_INST:
		return -EINVAL;
	default:	/* Device is gone. */
		return -ENODEV;
	}
}
EXPORT_SYMBOL(ap_send);

/**
 * __ap_recv(): Receive message from adjunct processor queue.
 * @qid: The AP queue number
 * @psmid: Pointer to program supplied message identifier
 * @msg: The message text
 * @length: The message length
 *
 * Returns AP queue status structure.
 * Condition code 1 on DQAP means the receive has taken place
 * but only partially.	The response is incomplete, hence the
 * DQAP is repeated.
 * Condition code 2 on DQAP also means the receive is incomplete,
 * this time because a segment boundary was reached. Again, the
 * DQAP is repeated.
 * Note that gpr2 is used by the DQAP instruction to keep track of
 * any 'residual' length, in case the instruction gets interrupted.
 * Hence it gets zeroed before the instruction.
 */
static inline struct ap_queue_status
__ap_recv(ap_qid_t qid, unsigned long long *psmid, void *msg, size_t length)
{
	typedef struct { char _[length]; } msgblock;
	register unsigned long reg0 asm("0") = qid | 0x80000000UL;
	register struct ap_queue_status reg1 asm ("1");
	register unsigned long reg2 asm("2") = 0UL;
	register unsigned long reg4 asm("4") = (unsigned long) msg;
	register unsigned long reg5 asm("5") = (unsigned long) length;
	register unsigned long reg6 asm("6") = 0UL;
	register unsigned long reg7 asm("7") = 0UL;


	asm volatile(
		"0: .long 0xb2ae0064\n"
		"   brc   6,0b\n"
		: "+d" (reg0), "=d" (reg1), "+d" (reg2),
		"+d" (reg4), "+d" (reg5), "+d" (reg6), "+d" (reg7),
		"=m" (*(msgblock *) msg) : : "cc" );
	*psmid = (((unsigned long long) reg6) << 32) + reg7;
	return reg1;
}

int ap_recv(ap_qid_t qid, unsigned long long *psmid, void *msg, size_t length)
{
	struct ap_queue_status status;

	status = __ap_recv(qid, psmid, msg, length);
	switch (status.response_code) {
	case AP_RESPONSE_NORMAL:
		return 0;
	case AP_RESPONSE_NO_PENDING_REPLY:
		if (status.queue_empty)
			return -ENOENT;
		return -EBUSY;
	case AP_RESPONSE_RESET_IN_PROGRESS:
		return -EBUSY;
	default:
		return -ENODEV;
	}
}
EXPORT_SYMBOL(ap_recv);

/**
 * ap_query_queue(): Check if an AP queue is available.
 * @qid: The AP queue number
 * @queue_depth: Pointer to queue depth value
 * @device_type: Pointer to device type value
 *
 * The test is repeated for AP_MAX_RESET times.
 */
static int ap_query_queue(ap_qid_t qid, int *queue_depth, int *device_type)
{
	struct ap_queue_status status;
	int t_depth, t_device_type, rc, i;

	rc = -EBUSY;
	for (i = 0; i < AP_MAX_RESET; i++) {
		status = ap_test_queue(qid, &t_depth, &t_device_type);
		switch (status.response_code) {
		case AP_RESPONSE_NORMAL:
			*queue_depth = t_depth + 1;
			*device_type = t_device_type;
			rc = 0;
			break;
		case AP_RESPONSE_Q_NOT_AVAIL:
			rc = -ENODEV;
			break;
		case AP_RESPONSE_RESET_IN_PROGRESS:
			break;
		case AP_RESPONSE_DECONFIGURED:
			rc = -ENODEV;
			break;
		case AP_RESPONSE_CHECKSTOPPED:
			rc = -ENODEV;
			break;
		case AP_RESPONSE_INVALID_ADDRESS:
			rc = -ENODEV;
			break;
		case AP_RESPONSE_OTHERWISE_CHANGED:
			break;
		case AP_RESPONSE_BUSY:
			break;
		default:
			BUG();
		}
		if (rc != -EBUSY)
			break;
		if (i < AP_MAX_RESET - 1)
			udelay(5);
	}
	return rc;
}

/**
 * ap_init_queue(): Reset an AP queue.
 * @qid: The AP queue number
 *
 * Reset an AP queue and wait for it to become available again.
 */
static int ap_init_queue(ap_qid_t qid)
{
	struct ap_queue_status status;
	int rc, dummy, i;

	rc = -ENODEV;
	status = ap_reset_queue(qid);
	for (i = 0; i < AP_MAX_RESET; i++) {
		switch (status.response_code) {
		case AP_RESPONSE_NORMAL:
			if (status.queue_empty)
				rc = 0;
			break;
		case AP_RESPONSE_Q_NOT_AVAIL:
		case AP_RESPONSE_DECONFIGURED:
		case AP_RESPONSE_CHECKSTOPPED:
			i = AP_MAX_RESET;	/* return with -ENODEV */
			break;
		case AP_RESPONSE_RESET_IN_PROGRESS:
			rc = -EBUSY;
		case AP_RESPONSE_BUSY:
		default:
			break;
		}
		if (rc != -ENODEV && rc != -EBUSY)
			break;
		if (i < AP_MAX_RESET - 1) {
			udelay(5);
			status = ap_test_queue(qid, &dummy, &dummy);
		}
	}
	if (rc == 0 && ap_using_interrupts()) {
		rc = ap_queue_enable_interruption(qid, ap_interrupt_indicator);
		/* If interruption mode is supported by the machine,
		* but an AP can not be enabled for interruption then
		* the AP will be discarded.    */
		if (rc)
			pr_err("Registering adapter interrupts for "
			       "AP %d failed\n", AP_QID_DEVICE(qid));
	}
	return rc;
}

/**
 * ap_increase_queue_count(): Arm request timeout.
 * @ap_dev: Pointer to an AP device.
 *
 * Arm request timeout if an AP device was idle and a new request is submitted.
 */
static void ap_increase_queue_count(struct ap_device *ap_dev)
{
	int timeout = ap_dev->drv->request_timeout;

	ap_dev->queue_count++;
	if (ap_dev->queue_count == 1) {
		mod_timer(&ap_dev->timeout, jiffies + timeout);
		ap_dev->reset = AP_RESET_ARMED;
	}
}

/**
 * ap_decrease_queue_count(): Decrease queue count.
 * @ap_dev: Pointer to an AP device.
 *
 * If AP device is still alive, re-schedule request timeout if there are still
 * pending requests.
 */
static void ap_decrease_queue_count(struct ap_device *ap_dev)
{
	int timeout = ap_dev->drv->request_timeout;

	ap_dev->queue_count--;
	if (ap_dev->queue_count > 0)
		mod_timer(&ap_dev->timeout, jiffies + timeout);
	else
		/*
		 * The timeout timer should to be disabled now - since
		 * del_timer_sync() is very expensive, we just tell via the
		 * reset flag to ignore the pending timeout timer.
		 */
		ap_dev->reset = AP_RESET_IGNORE;
}

/*
 * AP device related attributes.
 */
static ssize_t ap_hwtype_show(struct device *dev,
			      struct device_attribute *attr, char *buf)
{
	struct ap_device *ap_dev = to_ap_dev(dev);
	return snprintf(buf, PAGE_SIZE, "%d\n", ap_dev->device_type);
}

static DEVICE_ATTR(hwtype, 0444, ap_hwtype_show, NULL);
static ssize_t ap_depth_show(struct device *dev, struct device_attribute *attr,
			     char *buf)
{
	struct ap_device *ap_dev = to_ap_dev(dev);
	return snprintf(buf, PAGE_SIZE, "%d\n", ap_dev->queue_depth);
}

static DEVICE_ATTR(depth, 0444, ap_depth_show, NULL);
static ssize_t ap_request_count_show(struct device *dev,
				     struct device_attribute *attr,
				     char *buf)
{
	struct ap_device *ap_dev = to_ap_dev(dev);
	int rc;

	spin_lock_bh(&ap_dev->lock);
	rc = snprintf(buf, PAGE_SIZE, "%d\n", ap_dev->total_request_count);
	spin_unlock_bh(&ap_dev->lock);
	return rc;
}

static DEVICE_ATTR(request_count, 0444, ap_request_count_show, NULL);

static ssize_t ap_modalias_show(struct device *dev,
				struct device_attribute *attr, char *buf)
{
	return sprintf(buf, "ap:t%02X", to_ap_dev(dev)->device_type);
}

static DEVICE_ATTR(modalias, 0444, ap_modalias_show, NULL);

static struct attribute *ap_dev_attrs[] = {
	&dev_attr_hwtype.attr,
	&dev_attr_depth.attr,
	&dev_attr_request_count.attr,
	&dev_attr_modalias.attr,
	NULL
};
static struct attribute_group ap_dev_attr_group = {
	.attrs = ap_dev_attrs
};

/**
 * ap_bus_match()
 * @dev: Pointer to device
 * @drv: Pointer to device_driver
 *
 * AP bus driver registration/unregistration.
 */
static int ap_bus_match(struct device *dev, struct device_driver *drv)
{
	struct ap_device *ap_dev = to_ap_dev(dev);
	struct ap_driver *ap_drv = to_ap_drv(drv);
	struct ap_device_id *id;

	/*
	 * Compare device type of the device with the list of
	 * supported types of the device_driver.
	 */
	for (id = ap_drv->ids; id->match_flags; id++) {
		if ((id->match_flags & AP_DEVICE_ID_MATCH_DEVICE_TYPE) &&
		    (id->dev_type != ap_dev->device_type))
			continue;
		return 1;
	}
	return 0;
}

/**
 * ap_uevent(): Uevent function for AP devices.
 * @dev: Pointer to device
 * @env: Pointer to kobj_uevent_env
 *
 * It sets up a single environment variable DEV_TYPE which contains the
 * hardware device type.
 */
static int ap_uevent (struct device *dev, struct kobj_uevent_env *env)
{
	struct ap_device *ap_dev = to_ap_dev(dev);
	int retval = 0;

	if (!ap_dev)
		return -ENODEV;

	/* Set up DEV_TYPE environment variable. */
	retval = add_uevent_var(env, "DEV_TYPE=%04X", ap_dev->device_type);
	if (retval)
		return retval;

	/* Add MODALIAS= */
	retval = add_uevent_var(env, "MODALIAS=ap:t%02X", ap_dev->device_type);

	return retval;
}

static int ap_bus_suspend(struct device *dev, pm_message_t state)
{
	struct ap_device *ap_dev = to_ap_dev(dev);
	unsigned long flags;

	if (!ap_suspend_flag) {
		ap_suspend_flag = 1;

		/* Disable scanning for devices, thus we do not want to scan
		 * for them after removing.
		 */
		del_timer_sync(&ap_config_timer);
		if (ap_work_queue != NULL) {
			destroy_workqueue(ap_work_queue);
			ap_work_queue = NULL;
		}

		tasklet_disable(&ap_tasklet);
	}
	/* Poll on the device until all requests are finished. */
	do {
		flags = 0;
		spin_lock_bh(&ap_dev->lock);
		__ap_poll_device(ap_dev, &flags);
		spin_unlock_bh(&ap_dev->lock);
	} while ((flags & 1) || (flags & 2));

	spin_lock_bh(&ap_dev->lock);
	ap_dev->unregistered = 1;
	spin_unlock_bh(&ap_dev->lock);

	return 0;
}

static int ap_bus_resume(struct device *dev)
{
	int rc = 0;
	struct ap_device *ap_dev = to_ap_dev(dev);

	if (ap_suspend_flag) {
		ap_suspend_flag = 0;
		if (!ap_interrupts_available())
			ap_interrupt_indicator = NULL;
		if (!user_set_domain) {
			ap_domain_index = -1;
			ap_select_domain();
		}
		init_timer(&ap_config_timer);
		ap_config_timer.function = ap_config_timeout;
		ap_config_timer.data = 0;
		ap_config_timer.expires = jiffies + ap_config_time * HZ;
		add_timer(&ap_config_timer);
		ap_work_queue = create_singlethread_workqueue("kapwork");
		if (!ap_work_queue)
			return -ENOMEM;
		tasklet_enable(&ap_tasklet);
		if (!ap_using_interrupts())
			ap_schedule_poll_timer();
		else
			tasklet_schedule(&ap_tasklet);
		if (ap_thread_flag)
			rc = ap_poll_thread_start();
	}
	if (AP_QID_QUEUE(ap_dev->qid) != ap_domain_index) {
		spin_lock_bh(&ap_dev->lock);
		ap_dev->qid = AP_MKQID(AP_QID_DEVICE(ap_dev->qid),
				       ap_domain_index);
		spin_unlock_bh(&ap_dev->lock);
	}
	queue_work(ap_work_queue, &ap_config_work);

	return rc;
}

static struct bus_type ap_bus_type = {
	.name = "ap",
	.match = &ap_bus_match,
	.uevent = &ap_uevent,
	.suspend = ap_bus_suspend,
	.resume = ap_bus_resume
};

static int ap_device_probe(struct device *dev)
{
	struct ap_device *ap_dev = to_ap_dev(dev);
	struct ap_driver *ap_drv = to_ap_drv(dev->driver);
	int rc;

	ap_dev->drv = ap_drv;
	rc = ap_drv->probe ? ap_drv->probe(ap_dev) : -ENODEV;
	if (!rc) {
		spin_lock_bh(&ap_device_list_lock);
		list_add(&ap_dev->list, &ap_device_list);
		spin_unlock_bh(&ap_device_list_lock);
	}
	return rc;
}

/**
 * __ap_flush_queue(): Flush requests.
 * @ap_dev: Pointer to the AP device
 *
 * Flush all requests from the request/pending queue of an AP device.
 */
static void __ap_flush_queue(struct ap_device *ap_dev)
{
	struct ap_message *ap_msg, *next;

	list_for_each_entry_safe(ap_msg, next, &ap_dev->pendingq, list) {
		list_del_init(&ap_msg->list);
		ap_dev->pendingq_count--;
		ap_dev->drv->receive(ap_dev, ap_msg, ERR_PTR(-ENODEV));
	}
	list_for_each_entry_safe(ap_msg, next, &ap_dev->requestq, list) {
		list_del_init(&ap_msg->list);
		ap_dev->requestq_count--;
		ap_dev->drv->receive(ap_dev, ap_msg, ERR_PTR(-ENODEV));
	}
}

void ap_flush_queue(struct ap_device *ap_dev)
{
	spin_lock_bh(&ap_dev->lock);
	__ap_flush_queue(ap_dev);
	spin_unlock_bh(&ap_dev->lock);
}
EXPORT_SYMBOL(ap_flush_queue);

static int ap_device_remove(struct device *dev)
{
	struct ap_device *ap_dev = to_ap_dev(dev);
	struct ap_driver *ap_drv = ap_dev->drv;

	ap_flush_queue(ap_dev);
	del_timer_sync(&ap_dev->timeout);
	spin_lock_bh(&ap_device_list_lock);
	list_del_init(&ap_dev->list);
	spin_unlock_bh(&ap_device_list_lock);
	if (ap_drv->remove)
		ap_drv->remove(ap_dev);
	spin_lock_bh(&ap_dev->lock);
	atomic_sub(ap_dev->queue_count, &ap_poll_requests);
	spin_unlock_bh(&ap_dev->lock);
	return 0;
}

int ap_driver_register(struct ap_driver *ap_drv, struct module *owner,
		       char *name)
{
	struct device_driver *drv = &ap_drv->driver;

	drv->bus = &ap_bus_type;
	drv->probe = ap_device_probe;
	drv->remove = ap_device_remove;
	drv->owner = owner;
	drv->name = name;
	return driver_register(drv);
}
EXPORT_SYMBOL(ap_driver_register);

void ap_driver_unregister(struct ap_driver *ap_drv)
{
	driver_unregister(&ap_drv->driver);
}
EXPORT_SYMBOL(ap_driver_unregister);

/*
 * AP bus attributes.
 */
static ssize_t ap_domain_show(struct bus_type *bus, char *buf)
{
	return snprintf(buf, PAGE_SIZE, "%d\n", ap_domain_index);
}

static BUS_ATTR(ap_domain, 0444, ap_domain_show, NULL);

static ssize_t ap_config_time_show(struct bus_type *bus, char *buf)
{
	return snprintf(buf, PAGE_SIZE, "%d\n", ap_config_time);
}

static ssize_t ap_interrupts_show(struct bus_type *bus, char *buf)
{
	return snprintf(buf, PAGE_SIZE, "%d\n",
			ap_using_interrupts() ? 1 : 0);
}

static BUS_ATTR(ap_interrupts, 0444, ap_interrupts_show, NULL);

static ssize_t ap_config_time_store(struct bus_type *bus,
				    const char *buf, size_t count)
{
	int time;

	if (sscanf(buf, "%d\n", &time) != 1 || time < 5 || time > 120)
		return -EINVAL;
	ap_config_time = time;
	if (!timer_pending(&ap_config_timer) ||
	    !mod_timer(&ap_config_timer, jiffies + ap_config_time * HZ)) {
		ap_config_timer.expires = jiffies + ap_config_time * HZ;
		add_timer(&ap_config_timer);
	}
	return count;
}

static BUS_ATTR(config_time, 0644, ap_config_time_show, ap_config_time_store);

static ssize_t ap_poll_thread_show(struct bus_type *bus, char *buf)
{
	return snprintf(buf, PAGE_SIZE, "%d\n", ap_poll_kthread ? 1 : 0);
}

static ssize_t ap_poll_thread_store(struct bus_type *bus,
				    const char *buf, size_t count)
{
	int flag, rc;

	if (sscanf(buf, "%d\n", &flag) != 1)
		return -EINVAL;
	if (flag) {
		rc = ap_poll_thread_start();
		if (rc)
			return rc;
	}
	else
		ap_poll_thread_stop();
	return count;
}

static BUS_ATTR(poll_thread, 0644, ap_poll_thread_show, ap_poll_thread_store);

static ssize_t poll_timeout_show(struct bus_type *bus, char *buf)
{
	return snprintf(buf, PAGE_SIZE, "%llu\n", poll_timeout);
}

static ssize_t poll_timeout_store(struct bus_type *bus, const char *buf,
				  size_t count)
{
	unsigned long long time;
	ktime_t hr_time;

	/* 120 seconds = maximum poll interval */
	if (sscanf(buf, "%llu\n", &time) != 1 || time < 1 ||
	    time > 120000000000ULL)
		return -EINVAL;
	poll_timeout = time;
	hr_time = ktime_set(0, poll_timeout);

	if (!hrtimer_is_queued(&ap_poll_timer) ||
	    !hrtimer_forward(&ap_poll_timer, hrtimer_get_expires(&ap_poll_timer), hr_time)) {
		hrtimer_set_expires(&ap_poll_timer, hr_time);
		hrtimer_start_expires(&ap_poll_timer, HRTIMER_MODE_ABS);
	}
	return count;
}

static BUS_ATTR(poll_timeout, 0644, poll_timeout_show, poll_timeout_store);

static struct bus_attribute *const ap_bus_attrs[] = {
	&bus_attr_ap_domain,
	&bus_attr_config_time,
	&bus_attr_poll_thread,
	&bus_attr_ap_interrupts,
	&bus_attr_poll_timeout,
	NULL,
};

/**
 * ap_select_domain(): Select an AP domain.
 *
 * Pick one of the 16 AP domains.
 */
static int ap_select_domain(void)
{
	int queue_depth, device_type, count, max_count, best_domain;
	int rc, i, j;

	/*
	 * We want to use a single domain. Either the one specified with
	 * the "domain=" parameter or the domain with the maximum number
	 * of devices.
	 */
	if (ap_domain_index >= 0 && ap_domain_index < AP_DOMAINS)
		/* Domain has already been selected. */
		return 0;
	best_domain = -1;
	max_count = 0;
	for (i = 0; i < AP_DOMAINS; i++) {
		count = 0;
		for (j = 0; j < AP_DEVICES; j++) {
			ap_qid_t qid = AP_MKQID(j, i);
			rc = ap_query_queue(qid, &queue_depth, &device_type);
			if (rc)
				continue;
			count++;
		}
		if (count > max_count) {
			max_count = count;
			best_domain = i;
		}
	}
	if (best_domain >= 0){
		ap_domain_index = best_domain;
		return 0;
	}
	return -ENODEV;
}

/**
 * ap_probe_device_type(): Find the device type of an AP.
 * @ap_dev: pointer to the AP device.
 *
 * Find the device type if query queue returned a device type of 0.
 */
static int ap_probe_device_type(struct ap_device *ap_dev)
{
	static unsigned char msg[] = {
		0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,
		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
		0x00,0x00,0x00,0x58,0x00,0x00,0x00,0x00,
		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
		0x01,0x00,0x43,0x43,0x41,0x2d,0x41,0x50,
		0x50,0x4c,0x20,0x20,0x20,0x01,0x01,0x01,
		0x00,0x00,0x00,0x00,0x50,0x4b,0x00,0x00,
		0x00,0x00,0x01,0x1c,0x00,0x00,0x00,0x00,
		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
		0x00,0x00,0x05,0xb8,0x00,0x00,0x00,0x00,
		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
		0x70,0x00,0x41,0x00,0x00,0x00,0x00,0x00,
		0x00,0x00,0x54,0x32,0x01,0x00,0xa0,0x00,
		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
		0x00,0x00,0x00,0x00,0xb8,0x05,0x00,0x00,
		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
		0x00,0x00,0x0a,0x00,0x00,0x00,0x00,0x00,
		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
		0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,
		0x49,0x43,0x53,0x46,0x20,0x20,0x20,0x20,
		0x50,0x4b,0x0a,0x00,0x50,0x4b,0x43,0x53,
		0x2d,0x31,0x2e,0x32,0x37,0x00,0x11,0x22,
		0x33,0x44,0x55,0x66,0x77,0x88,0x99,0x00,
		0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,
		0x99,0x00,0x11,0x22,0x33,0x44,0x55,0x66,
		0x77,0x88,0x99,0x00,0x11,0x22,0x33,0x44,
		0x55,0x66,0x77,0x88,0x99,0x00,0x11,0x22,
		0x33,0x44,0x55,0x66,0x77,0x88,0x99,0x00,
		0x11,0x22,0x33,0x5d,0x00,0x5b,0x00,0x77,
		0x88,0x1e,0x00,0x00,0x57,0x00,0x00,0x00,
		0x00,0x04,0x00,0x00,0x4f,0x00,0x00,0x00,
		0x03,0x02,0x00,0x00,0x40,0x01,0x00,0x01,
		0xce,0x02,0x68,0x2d,0x5f,0xa9,0xde,0x0c,
		0xf6,0xd2,0x7b,0x58,0x4b,0xf9,0x28,0x68,
		0x3d,0xb4,0xf4,0xef,0x78,0xd5,0xbe,0x66,
		0x63,0x42,0xef,0xf8,0xfd,0xa4,0xf8,0xb0,
		0x8e,0x29,0xc2,0xc9,0x2e,0xd8,0x45,0xb8,
		0x53,0x8c,0x6f,0x4e,0x72,0x8f,0x6c,0x04,
		0x9c,0x88,0xfc,0x1e,0xc5,0x83,0x55,0x57,
		0xf7,0xdd,0xfd,0x4f,0x11,0x36,0x95,0x5d,
	};
	struct ap_queue_status status;
	unsigned long long psmid;
	char *reply;
	int rc, i;

	reply = (void *) get_zeroed_page(GFP_KERNEL);
	if (!reply) {
		rc = -ENOMEM;
		goto out;
	}

	status = __ap_send(ap_dev->qid, 0x0102030405060708ULL,
			   msg, sizeof(msg), 0);
	if (status.response_code != AP_RESPONSE_NORMAL) {
		rc = -ENODEV;
		goto out_free;
	}

	/* Wait for the test message to complete. */
	for (i = 0; i < 6; i++) {
		mdelay(300);
		status = __ap_recv(ap_dev->qid, &psmid, reply, 4096);
		if (status.response_code == AP_RESPONSE_NORMAL &&
		    psmid == 0x0102030405060708ULL)
			break;
	}
	if (i < 6) {
		/* Got an answer. */
		if (reply[0] == 0x00 && reply[1] == 0x86)
			ap_dev->device_type = AP_DEVICE_TYPE_PCICC;
		else
			ap_dev->device_type = AP_DEVICE_TYPE_PCICA;
		rc = 0;
	} else
		rc = -ENODEV;

out_free:
	free_page((unsigned long) reply);
out:
	return rc;
}

static void ap_interrupt_handler(void *unused1, void *unused2)
{
	kstat_cpu(smp_processor_id()).irqs[IOINT_APB]++;
	tasklet_schedule(&ap_tasklet);
}

/**
 * __ap_scan_bus(): Scan the AP bus.
 * @dev: Pointer to device
 * @data: Pointer to data
 *
 * Scan the AP bus for new devices.
 */
static int __ap_scan_bus(struct device *dev, void *data)
{
	return to_ap_dev(dev)->qid == (ap_qid_t)(unsigned long) data;
}

static void ap_device_release(struct device *dev)
{
	struct ap_device *ap_dev = to_ap_dev(dev);

	kfree(ap_dev);
}

static void ap_scan_bus(struct work_struct *unused)
{
	struct ap_device *ap_dev;
	struct device *dev;
	ap_qid_t qid;
	int queue_depth, device_type;
	int rc, i;

	if (ap_select_domain() != 0)
		return;
	for (i = 0; i < AP_DEVICES; i++) {
		qid = AP_MKQID(i, ap_domain_index);
		dev = bus_find_device(&ap_bus_type, NULL,
				      (void *)(unsigned long)qid,
				      __ap_scan_bus);
		rc = ap_query_queue(qid, &queue_depth, &device_type);
		if (dev) {
			if (rc == -EBUSY) {
				set_current_state(TASK_UNINTERRUPTIBLE);
				schedule_timeout(AP_RESET_TIMEOUT);
				rc = ap_query_queue(qid, &queue_depth,
						    &device_type);
			}
			ap_dev = to_ap_dev(dev);
			spin_lock_bh(&ap_dev->lock);
			if (rc || ap_dev->unregistered) {
				spin_unlock_bh(&ap_dev->lock);
				if (ap_dev->unregistered)
					i--;
				device_unregister(dev);
				put_device(dev);
				continue;
			}
			spin_unlock_bh(&ap_dev->lock);
			put_device(dev);
			continue;
		}
		if (rc)
			continue;
		rc = ap_init_queue(qid);
		if (rc)
			continue;
		ap_dev = kzalloc(sizeof(*ap_dev), GFP_KERNEL);
		if (!ap_dev)
			break;
		ap_dev->qid = qid;
		ap_dev->queue_depth = queue_depth;
		ap_dev->unregistered = 1;
		spin_lock_init(&ap_dev->lock);
		INIT_LIST_HEAD(&ap_dev->pendingq);
		INIT_LIST_HEAD(&ap_dev->requestq);
		INIT_LIST_HEAD(&ap_dev->list);
		setup_timer(&ap_dev->timeout, ap_request_timeout,
			    (unsigned long) ap_dev);
		if (device_type == 0) {
			if (ap_probe_device_type(ap_dev)) {
				kfree(ap_dev);
				continue;
			}
		}
		else
			ap_dev->device_type = device_type;

		ap_dev->device.bus = &ap_bus_type;
		ap_dev->device.parent = ap_root_device;
		if (dev_set_name(&ap_dev->device, "card%02x",
				 AP_QID_DEVICE(ap_dev->qid))) {
			kfree(ap_dev);
			continue;
		}
		ap_dev->device.release = ap_device_release;
		rc = device_register(&ap_dev->device);
		if (rc) {
			put_device(&ap_dev->device);
			continue;
		}
		/* Add device attributes. */
		rc = sysfs_create_group(&ap_dev->device.kobj,
					&ap_dev_attr_group);
		if (!rc) {
			spin_lock_bh(&ap_dev->lock);
			ap_dev->unregistered = 0;
			spin_unlock_bh(&ap_dev->lock);
		}
		else
			device_unregister(&ap_dev->device);
	}
}

static void
ap_config_timeout(unsigned long ptr)
{
	queue_work(ap_work_queue, &ap_config_work);
	ap_config_timer.expires = jiffies + ap_config_time * HZ;
	add_timer(&ap_config_timer);
}

/**
 * ap_schedule_poll_timer(): Schedule poll timer.
 *
 * Set up the timer to run the poll tasklet
 */
static inline void ap_schedule_poll_timer(void)
{
	ktime_t hr_time;

	spin_lock_bh(&ap_poll_timer_lock);
	if (ap_using_interrupts() || ap_suspend_flag)
		goto out;
	if (hrtimer_is_queued(&ap_poll_timer))
		goto out;
	if (ktime_to_ns(hrtimer_expires_remaining(&ap_poll_timer)) <= 0) {
		hr_time = ktime_set(0, poll_timeout);
		hrtimer_forward_now(&ap_poll_timer, hr_time);
		hrtimer_restart(&ap_poll_timer);
	}
out:
	spin_unlock_bh(&ap_poll_timer_lock);
}

/**
 * ap_poll_read(): Receive pending reply messages from an AP device.
 * @ap_dev: pointer to the AP device
 * @flags: pointer to control flags, bit 2^0 is set if another poll is
 *	   required, bit 2^1 is set if the poll timer needs to get armed
 *
 * Returns 0 if the device is still present, -ENODEV if not.
 */
static int ap_poll_read(struct ap_device *ap_dev, unsigned long *flags)
{
	struct ap_queue_status status;
	struct ap_message *ap_msg;

	if (ap_dev->queue_count <= 0)
		return 0;
	status = __ap_recv(ap_dev->qid, &ap_dev->reply->psmid,
			   ap_dev->reply->message, ap_dev->reply->length);
	switch (status.response_code) {
	case AP_RESPONSE_NORMAL:
		atomic_dec(&ap_poll_requests);
		ap_decrease_queue_count(ap_dev);
		list_for_each_entry(ap_msg, &ap_dev->pendingq, list) {
			if (ap_msg->psmid != ap_dev->reply->psmid)
				continue;
			list_del_init(&ap_msg->list);
			ap_dev->pendingq_count--;
			ap_dev->drv->receive(ap_dev, ap_msg, ap_dev->reply);
			break;
		}
		if (ap_dev->queue_count > 0)
			*flags |= 1;
		break;
	case AP_RESPONSE_NO_PENDING_REPLY:
		if (status.queue_empty) {
			/* The card shouldn't forget requests but who knows. */
			atomic_sub(ap_dev->queue_count, &ap_poll_requests);
			ap_dev->queue_count = 0;
			list_splice_init(&ap_dev->pendingq, &ap_dev->requestq);
			ap_dev->requestq_count += ap_dev->pendingq_count;
			ap_dev->pendingq_count = 0;
		} else
			*flags |= 2;
		break;
	default:
		return -ENODEV;
	}
	return 0;
}

/**
 * ap_poll_write(): Send messages from the request queue to an AP device.
 * @ap_dev: pointer to the AP device
 * @flags: pointer to control flags, bit 2^0 is set if another poll is
 *	   required, bit 2^1 is set if the poll timer needs to get armed
 *
 * Returns 0 if the device is still present, -ENODEV if not.
 */
static int ap_poll_write(struct ap_device *ap_dev, unsigned long *flags)
{
	struct ap_queue_status status;
	struct ap_message *ap_msg;

	if (ap_dev->requestq_count <= 0 ||
	    ap_dev->queue_count >= ap_dev->queue_depth)
		return 0;
	/* Start the next request on the queue. */
	ap_msg = list_entry(ap_dev->requestq.next, struct ap_message, list);
	status = __ap_send(ap_dev->qid, ap_msg->psmid,
			   ap_msg->message, ap_msg->length, ap_msg->special);
	switch (status.response_code) {
	case AP_RESPONSE_NORMAL:
		atomic_inc(&ap_poll_requests);
		ap_increase_queue_count(ap_dev);
		list_move_tail(&ap_msg->list, &ap_dev->pendingq);
		ap_dev->requestq_count--;
		ap_dev->pendingq_count++;
		if (ap_dev->queue_count < ap_dev->queue_depth &&
		    ap_dev->requestq_count > 0)
			*flags |= 1;
		*flags |= 2;
		break;
	case AP_RESPONSE_Q_FULL:
	case AP_RESPONSE_RESET_IN_PROGRESS:
		*flags |= 2;
		break;
	case AP_RESPONSE_MESSAGE_TOO_BIG:
	case AP_RESPONSE_REQ_FAC_NOT_INST:
		return -EINVAL;
	default:
		return -ENODEV;
	}
	return 0;
}

/**
 * ap_poll_queue(): Poll AP device for pending replies and send new messages.
 * @ap_dev: pointer to the bus device
 * @flags: pointer to control flags, bit 2^0 is set if another poll is
 *	   required, bit 2^1 is set if the poll timer needs to get armed
 *
 * Poll AP device for pending replies and send new messages. If either
 * ap_poll_read or ap_poll_write returns -ENODEV unregister the device.
 * Returns 0.
 */
static inline int ap_poll_queue(struct ap_device *ap_dev, unsigned long *flags)
{
	int rc;

	rc = ap_poll_read(ap_dev, flags);
	if (rc)
		return rc;
	return ap_poll_write(ap_dev, flags);
}

/**
 * __ap_queue_message(): Queue a message to a device.
 * @ap_dev: pointer to the AP device
 * @ap_msg: the message to be queued
 *
 * Queue a message to a device. Returns 0 if successful.
 */
static int __ap_queue_message(struct ap_device *ap_dev, struct ap_message *ap_msg)
{
	struct ap_queue_status status;

	if (list_empty(&ap_dev->requestq) &&
	    ap_dev->queue_count < ap_dev->queue_depth) {
		status = __ap_send(ap_dev->qid, ap_msg->psmid,
				   ap_msg->message, ap_msg->length,
				   ap_msg->special);
		switch (status.response_code) {
		case AP_RESPONSE_NORMAL:
			list_add_tail(&ap_msg->list, &ap_dev->pendingq);
			atomic_inc(&ap_poll_requests);
			ap_dev->pendingq_count++;
			ap_increase_queue_count(ap_dev);
			ap_dev->total_request_count++;
			break;
		case AP_RESPONSE_Q_FULL:
		case AP_RESPONSE_RESET_IN_PROGRESS:
			list_add_tail(&ap_msg->list, &ap_dev->requestq);
			ap_dev->requestq_count++;
			ap_dev->total_request_count++;
			return -EBUSY;
		case AP_RESPONSE_REQ_FAC_NOT_INST:
		case AP_RESPONSE_MESSAGE_TOO_BIG:
			ap_dev->drv->receive(ap_dev, ap_msg, ERR_PTR(-EINVAL));
			return -EINVAL;
		default:	/* Device is gone. */
			ap_dev->drv->receive(ap_dev, ap_msg, ERR_PTR(-ENODEV));
			return -ENODEV;
		}
	} else {
		list_add_tail(&ap_msg->list, &ap_dev->requestq);
		ap_dev->requestq_count++;
		ap_dev->total_request_count++;
		return -EBUSY;
	}
	ap_schedule_poll_timer();
	return 0;
}

void ap_queue_message(struct ap_device *ap_dev, struct ap_message *ap_msg)
{
	unsigned long flags;
	int rc;

	spin_lock_bh(&ap_dev->lock);
	if (!ap_dev->unregistered) {
		/* Make room on the queue by polling for finished requests. */
		rc = ap_poll_queue(ap_dev, &flags);
		if (!rc)
			rc = __ap_queue_message(ap_dev, ap_msg);
		if (!rc)
			wake_up(&ap_poll_wait);
		if (rc == -ENODEV)
			ap_dev->unregistered = 1;
	} else {
		ap_dev->drv->receive(ap_dev, ap_msg, ERR_PTR(-ENODEV));
		rc = -ENODEV;
	}
	spin_unlock_bh(&ap_dev->lock);
	if (rc == -ENODEV)
		device_unregister(&ap_dev->device);
}
EXPORT_SYMBOL(ap_queue_message);

/**
 * ap_cancel_message(): Cancel a crypto request.
 * @ap_dev: The AP device that has the message queued
 * @ap_msg: The message that is to be removed
 *
 * Cancel a crypto request. This is done by removing the request
 * from the device pending or request queue. Note that the
 * request stays on the AP queue. When it finishes the message
 * reply will be discarded because the psmid can't be found.
 */
void ap_cancel_message(struct ap_device *ap_dev, struct ap_message *ap_msg)
{
	struct ap_message *tmp;

	spin_lock_bh(&ap_dev->lock);
	if (!list_empty(&ap_msg->list)) {
		list_for_each_entry(tmp, &ap_dev->pendingq, list)
			if (tmp->psmid == ap_msg->psmid) {
				ap_dev->pendingq_count--;
				goto found;
			}
		ap_dev->requestq_count--;
	found:
		list_del_init(&ap_msg->list);
	}
	spin_unlock_bh(&ap_dev->lock);
}
EXPORT_SYMBOL(ap_cancel_message);

/**
 * ap_poll_timeout(): AP receive polling for finished AP requests.
 * @unused: Unused pointer.
 *
 * Schedules the AP tasklet using a high resolution timer.
 */
static enum hrtimer_restart ap_poll_timeout(struct hrtimer *unused)
{
	tasklet_schedule(&ap_tasklet);
	return HRTIMER_NORESTART;
}

/**
 * ap_reset(): Reset a not responding AP device.
 * @ap_dev: Pointer to the AP device
 *
 * Reset a not responding AP device and move all requests from the
 * pending queue to the request queue.
 */
static void ap_reset(struct ap_device *ap_dev)
{
	int rc;

	ap_dev->reset = AP_RESET_IGNORE;
	atomic_sub(ap_dev->queue_count, &ap_poll_requests);
	ap_dev->queue_count = 0;
	list_splice_init(&ap_dev->pendingq, &ap_dev->requestq);
	ap_dev->requestq_count += ap_dev->pendingq_count;
	ap_dev->pendingq_count = 0;
	rc = ap_init_queue(ap_dev->qid);
	if (rc == -ENODEV)
		ap_dev->unregistered = 1;
}

static int __ap_poll_device(struct ap_device *ap_dev, unsigned long *flags)
{
	if (!ap_dev->unregistered) {
		if (ap_poll_queue(ap_dev, flags))
			ap_dev->unregistered = 1;
		if (ap_dev->reset == AP_RESET_DO)
			ap_reset(ap_dev);
	}
	return 0;
}

/**
 * ap_poll_all(): Poll all AP devices.
 * @dummy: Unused variable
 *
 * Poll all AP devices on the bus in a round robin fashion. Continue
 * polling until bit 2^0 of the control flags is not set. If bit 2^1
 * of the control flags has been set arm the poll timer.
 */
static void ap_poll_all(unsigned long dummy)
{
	unsigned long flags;
	struct ap_device *ap_dev;

	/* Reset the indicator if interrupts are used. Thus new interrupts can
	 * be received. Doing it in the beginning of the tasklet is therefor
	 * important that no requests on any AP get lost.
	 */
	if (ap_using_interrupts())
		xchg((u8 *)ap_interrupt_indicator, 0);
	do {
		flags = 0;
		spin_lock(&ap_device_list_lock);
		list_for_each_entry(ap_dev, &ap_device_list, list) {
			spin_lock(&ap_dev->lock);
			__ap_poll_device(ap_dev, &flags);
			spin_unlock(&ap_dev->lock);
		}
		spin_unlock(&ap_device_list_lock);
	} while (flags & 1);
	if (flags & 2)
		ap_schedule_poll_timer();
}

/**
 * ap_poll_thread(): Thread that polls for finished requests.
 * @data: Unused pointer
 *
 * AP bus poll thread. The purpose of this thread is to poll for
 * finished requests in a loop if there is a "free" cpu - that is
 * a cpu that doesn't have anything better to do. The polling stops
 * as soon as there is another task or if all messages have been
 * delivered.
 */
static int ap_poll_thread(void *data)
{
	DECLARE_WAITQUEUE(wait, current);
	unsigned long flags;
	int requests;
	struct ap_device *ap_dev;

	set_user_nice(current, 19);
	while (1) {
		if (ap_suspend_flag)
			return 0;
		if (need_resched()) {
			schedule();
			continue;
		}
		add_wait_queue(&ap_poll_wait, &wait);
		set_current_state(TASK_INTERRUPTIBLE);
		if (kthread_should_stop())
			break;
		requests = atomic_read(&ap_poll_requests);
		if (requests <= 0)
			schedule();
		set_current_state(TASK_RUNNING);
		remove_wait_queue(&ap_poll_wait, &wait);

		flags = 0;
		spin_lock_bh(&ap_device_list_lock);
		list_for_each_entry(ap_dev, &ap_device_list, list) {
			spin_lock(&ap_dev->lock);
			__ap_poll_device(ap_dev, &flags);
			spin_unlock(&ap_dev->lock);
		}
		spin_unlock_bh(&ap_device_list_lock);
	}
	set_current_state(TASK_RUNNING);
	remove_wait_queue(&ap_poll_wait, &wait);
	return 0;
}

static int ap_poll_thread_start(void)
{
	int rc;

	if (ap_using_interrupts() || ap_suspend_flag)
		return 0;
	mutex_lock(&ap_poll_thread_mutex);
	if (!ap_poll_kthread) {
		ap_poll_kthread = kthread_run(ap_poll_thread, NULL, "appoll");
		rc = IS_ERR(ap_poll_kthread) ? PTR_ERR(ap_poll_kthread) : 0;
		if (rc)
			ap_poll_kthread = NULL;
	}
	else
		rc = 0;
	mutex_unlock(&ap_poll_thread_mutex);
	return rc;
}

static void ap_poll_thread_stop(void)
{
	mutex_lock(&ap_poll_thread_mutex);
	if (ap_poll_kthread) {
		kthread_stop(ap_poll_kthread);
		ap_poll_kthread = NULL;
	}
	mutex_unlock(&ap_poll_thread_mutex);
}

/**
 * ap_request_timeout(): Handling of request timeouts
 * @data: Holds the AP device.
 *
 * Handles request timeouts.
 */
static void ap_request_timeout(unsigned long data)
{
	struct ap_device *ap_dev = (struct ap_device *) data;

	if (ap_dev->reset == AP_RESET_ARMED) {
		ap_dev->reset = AP_RESET_DO;

		if (ap_using_interrupts())
			tasklet_schedule(&ap_tasklet);
	}
}

static void ap_reset_domain(void)
{
	int i;

	if (ap_domain_index != -1)
		for (i = 0; i < AP_DEVICES; i++)
			ap_reset_queue(AP_MKQID(i, ap_domain_index));
}

static void ap_reset_all(void)
{
	int i, j;

	for (i = 0; i < AP_DOMAINS; i++)
		for (j = 0; j < AP_DEVICES; j++)
			ap_reset_queue(AP_MKQID(j, i));
}

static struct reset_call ap_reset_call = {
	.fn = ap_reset_all,
};

/**
 * ap_module_init(): The module initialization code.
 *
 * Initializes the module.
 */
int __init ap_module_init(void)
{
	int rc, i;

	if (ap_domain_index < -1 || ap_domain_index >= AP_DOMAINS) {
		pr_warning("%d is not a valid cryptographic domain\n",
			   ap_domain_index);
		return -EINVAL;
	}
	/* In resume callback we need to know if the user had set the domain.
	 * If so, we can not just reset it.
	 */
	if (ap_domain_index >= 0)
		user_set_domain = 1;

	if (ap_instructions_available() != 0) {
		pr_warning("The hardware system does not support "
			   "AP instructions\n");
		return -ENODEV;
	}
	if (ap_interrupts_available()) {
		isc_register(AP_ISC);
		ap_interrupt_indicator = s390_register_adapter_interrupt(
			&ap_interrupt_handler, NULL, AP_ISC);
		if (IS_ERR(ap_interrupt_indicator)) {
			ap_interrupt_indicator = NULL;
			isc_unregister(AP_ISC);
		}
	}

	register_reset_call(&ap_reset_call);

	/* Create /sys/bus/ap. */
	rc = bus_register(&ap_bus_type);
	if (rc)
		goto out;
	for (i = 0; ap_bus_attrs[i]; i++) {
		rc = bus_create_file(&ap_bus_type, ap_bus_attrs[i]);
		if (rc)
			goto out_bus;
	}

	/* Create /sys/devices/ap. */
	ap_root_device = root_device_register("ap");
	rc = IS_ERR(ap_root_device) ? PTR_ERR(ap_root_device) : 0;
	if (rc)
		goto out_bus;

	ap_work_queue = create_singlethread_workqueue("kapwork");
	if (!ap_work_queue) {
		rc = -ENOMEM;
		goto out_root;
	}

	if (ap_select_domain() == 0)
		ap_scan_bus(NULL);

	/* Setup the AP bus rescan timer. */
	init_timer(&ap_config_timer);
	ap_config_timer.function = ap_config_timeout;
	ap_config_timer.data = 0;
	ap_config_timer.expires = jiffies + ap_config_time * HZ;
	add_timer(&ap_config_timer);

	/* Setup the high resultion poll timer.
	 * If we are running under z/VM adjust polling to z/VM polling rate.
	 */
	if (MACHINE_IS_VM)
		poll_timeout = 1500000;
	spin_lock_init(&ap_poll_timer_lock);
	hrtimer_init(&ap_poll_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
	ap_poll_timer.function = ap_poll_timeout;

	/* Start the low priority AP bus poll thread. */
	if (ap_thread_flag) {
		rc = ap_poll_thread_start();
		if (rc)
			goto out_work;
	}

	return 0;

out_work:
	del_timer_sync(&ap_config_timer);
	hrtimer_cancel(&ap_poll_timer);
	destroy_workqueue(ap_work_queue);
out_root:
	root_device_unregister(ap_root_device);
out_bus:
	while (i--)
		bus_remove_file(&ap_bus_type, ap_bus_attrs[i]);
	bus_unregister(&ap_bus_type);
out:
	unregister_reset_call(&ap_reset_call);
	if (ap_using_interrupts()) {
		s390_unregister_adapter_interrupt(ap_interrupt_indicator, AP_ISC);
		isc_unregister(AP_ISC);
	}
	return rc;
}

static int __ap_match_all(struct device *dev, void *data)
{
	return 1;
}

/**
 * ap_modules_exit(): The module termination code
 *
 * Terminates the module.
 */
void ap_module_exit(void)
{
	int i;
	struct device *dev;

	ap_reset_domain();
	ap_poll_thread_stop();
	del_timer_sync(&ap_config_timer);
	hrtimer_cancel(&ap_poll_timer);
	destroy_workqueue(ap_work_queue);
	tasklet_kill(&ap_tasklet);
	root_device_unregister(ap_root_device);
	while ((dev = bus_find_device(&ap_bus_type, NULL, NULL,
		    __ap_match_all)))
	{
		device_unregister(dev);
		put_device(dev);
	}
	for (i = 0; ap_bus_attrs[i]; i++)
		bus_remove_file(&ap_bus_type, ap_bus_attrs[i]);
	bus_unregister(&ap_bus_type);
	unregister_reset_call(&ap_reset_call);
	if (ap_using_interrupts()) {
		s390_unregister_adapter_interrupt(ap_interrupt_indicator, AP_ISC);
		isc_unregister(AP_ISC);
	}
}

#ifndef CONFIG_ZCRYPT_MONOLITHIC
module_init(ap_module_init);
module_exit(ap_module_exit);
#endif