mach-nuri.c

/*
 * linux/arch/arm/mach-exynos4/mach-nuri.c
 *
 * Copyright (c) 2011 Samsung Electronics Co., Ltd.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/input.h>
#include <linux/i2c.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/mmc/host.h>

#include <asm/mach/arch.h>
#include <asm/mach-types.h>

#include <plat/regs-serial.h>
#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/sdhci.h>

#include <mach/map.h>

/* Following are default values for UCON, ULCON and UFCON UART registers */
#define NURI_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
				 S3C2410_UCON_RXILEVEL |	\
				 S3C2410_UCON_TXIRQMODE |	\
				 S3C2410_UCON_RXIRQMODE |	\
				 S3C2410_UCON_RXFIFO_TOI |	\
				 S3C2443_UCON_RXERR_IRQEN)

#define NURI_ULCON_DEFAULT	S3C2410_LCON_CS8

#define NURI_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
				 S5PV210_UFCON_TXTRIG256 |	\
				 S5PV210_UFCON_RXTRIG256)

enum fixed_regulator_id {
	FIXED_REG_ID_MMC = 0,
};

static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = {
	{
		.hwport		= 0,
		.ucon		= NURI_UCON_DEFAULT,
		.ulcon		= NURI_ULCON_DEFAULT,
		.ufcon		= NURI_UFCON_DEFAULT,
	},
	{
		.hwport		= 1,
		.ucon		= NURI_UCON_DEFAULT,
		.ulcon		= NURI_ULCON_DEFAULT,
		.ufcon		= NURI_UFCON_DEFAULT,
	},
	{
		.hwport		= 2,
		.ucon		= NURI_UCON_DEFAULT,
		.ulcon		= NURI_ULCON_DEFAULT,
		.ufcon		= NURI_UFCON_DEFAULT,
	},
	{
		.hwport		= 3,
		.ucon		= NURI_UCON_DEFAULT,
		.ulcon		= NURI_ULCON_DEFAULT,
		.ufcon		= NURI_UFCON_DEFAULT,
	},
};

/* eMMC */
static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = {
	.max_width		= 8,
	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
				MMC_CAP_DISABLE | MMC_CAP_ERASE),
	.cd_type		= S3C_SDHCI_CD_PERMANENT,
	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
};

static struct regulator_consumer_supply emmc_supplies[] = {
	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
	REGULATOR_SUPPLY("vmmc", "dw_mmc"),
};

static struct regulator_init_data emmc_fixed_voltage_init_data = {
	.constraints		= {
		.name		= "VMEM_VDD_2.8V",
		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies	= ARRAY_SIZE(emmc_supplies),
	.consumer_supplies	= emmc_supplies,
};

static struct fixed_voltage_config emmc_fixed_voltage_config = {
	.supply_name		= "MASSMEMORY_EN (inverted)",
	.microvolts		= 2800000,
	.gpio			= EXYNOS4_GPL1(1),
	.enable_high		= false,
	.init_data		= &emmc_fixed_voltage_init_data,
};

static struct platform_device emmc_fixed_voltage = {
	.name			= "reg-fixed-voltage",
	.id			= FIXED_REG_ID_MMC,
	.dev			= {
		.platform_data	= &emmc_fixed_voltage_config,
	},
};

/* SD */
static struct s3c_sdhci_platdata nuri_hsmmc2_data __initdata = {
	.max_width		= 4,
	.host_caps		= MMC_CAP_4_BIT_DATA |
				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
				MMC_CAP_DISABLE,
	.ext_cd_gpio		= EXYNOS4_GPX3(3),	/* XEINT_27 */
	.ext_cd_gpio_invert	= 1,
	.cd_type		= S3C_SDHCI_CD_GPIO,
	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
};

/* WLAN */
static struct s3c_sdhci_platdata nuri_hsmmc3_data __initdata = {
	.max_width		= 4,
	.host_caps		= MMC_CAP_4_BIT_DATA |
				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
	.cd_type		= S3C_SDHCI_CD_EXTERNAL,
	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
};

static void __init nuri_sdhci_init(void)
{
	s3c_sdhci0_set_platdata(&nuri_hsmmc0_data);
	s3c_sdhci2_set_platdata(&nuri_hsmmc2_data);
	s3c_sdhci3_set_platdata(&nuri_hsmmc3_data);
}

/* GPIO KEYS */
static struct gpio_keys_button nuri_gpio_keys_tables[] = {
	{
		.code			= KEY_VOLUMEUP,
		.gpio			= EXYNOS4_GPX2(0),	/* XEINT16 */
		.desc			= "gpio-keys: KEY_VOLUMEUP",
		.type			= EV_KEY,
		.active_low		= 1,
		.debounce_interval	= 1,
	}, {
		.code			= KEY_VOLUMEDOWN,
		.gpio			= EXYNOS4_GPX2(1),	/* XEINT17 */
		.desc			= "gpio-keys: KEY_VOLUMEDOWN",
		.type			= EV_KEY,
		.active_low		= 1,
		.debounce_interval	= 1,
	}, {
		.code			= KEY_POWER,
		.gpio			= EXYNOS4_GPX2(7),	/* XEINT23 */
		.desc			= "gpio-keys: KEY_POWER",
		.type			= EV_KEY,
		.active_low		= 1,
		.wakeup			= 1,
		.debounce_interval	= 1,
	},
};

static struct gpio_keys_platform_data nuri_gpio_keys_data = {
	.buttons		= nuri_gpio_keys_tables,
	.nbuttons		= ARRAY_SIZE(nuri_gpio_keys_tables),
};

static struct platform_device nuri_gpio_keys = {
	.name			= "gpio-keys",
	.dev			= {
		.platform_data	= &nuri_gpio_keys_data,
	},
};

/* I2C1 */
static struct i2c_board_info i2c1_devs[] __initdata = {
	/* Gyro, To be updated */
};

/* GPIO I2C 5 (PMIC) */
static struct i2c_board_info i2c5_devs[] __initdata = {
	/* max8997, To be updated */
};

static struct platform_device *nuri_devices[] __initdata = {
	/* Samsung Platform Devices */
	&emmc_fixed_voltage,
	&s3c_device_hsmmc0,
	&s3c_device_hsmmc2,
	&s3c_device_hsmmc3,
	&s3c_device_wdt,

	/* NURI Devices */
	&nuri_gpio_keys,
};

static void __init nuri_map_io(void)
{
	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
	s3c24xx_init_clocks(24000000);
	s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
}

static void __init nuri_machine_init(void)
{
	nuri_sdhci_init();

	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
	i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));

	/* Last */
	platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
}

MACHINE_START(NURI, "NURI")
	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
	.boot_params	= S5P_PA_SDRAM + 0x100,
	.init_irq	= exynos4_init_irq,
	.map_io		= nuri_map_io,
	.init_machine	= nuri_machine_init,
	.timer		= &exynos4_timer,
MACHINE_END