oak.c 4.6 KB
Newer Older
L
Linus Torvalds 已提交
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215
/*
 * Oak Generic NCR5380 driver
 *
 * Copyright 1995-2002, Russell King
 */

#include <linux/module.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/blkdev.h>
#include <linux/init.h>

#include <asm/ecard.h>
#include <asm/io.h>
#include <asm/system.h>

#include "../scsi.h"
#include <scsi/scsi_host.h>

#define AUTOSENSE
/*#define PSEUDO_DMA*/

#define OAKSCSI_PUBLIC_RELEASE 1

#define NCR5380_read(reg)		oakscsi_read(_instance, reg)
#define NCR5380_write(reg, value)	oakscsi_write(_instance, reg, value)
#define NCR5380_intr			oakscsi_intr
#define NCR5380_queue_command		oakscsi_queue_command
#define NCR5380_proc_info		oakscsi_proc_info

#define NCR5380_implementation_fields	int port, ctrl
#define NCR5380_local_declare()		struct Scsi_Host *_instance
#define NCR5380_setup(instance)		_instance = instance

#define BOARD_NORMAL	0
#define BOARD_NCR53C400	1

#include "../NCR5380.h"

#undef START_DMA_INITIATOR_RECEIVE_REG
#define START_DMA_INITIATOR_RECEIVE_REG (7 + 128)

const char * oakscsi_info (struct Scsi_Host *spnt)
{
	return "";
}

#define STAT(p)   inw(p + 144)
extern void inswb(int from, void *to, int len);

static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *addr,
              int len)
{
  int iobase = instance->io_port;
printk("writing %p len %d\n",addr, len);
  if(!len) return -1;

  while(1)
  {
    int status;
    while(((status = STAT(iobase)) & 0x100)==0);
  }
}

static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *addr,
              int len)
{
  int iobase = instance->io_port;
printk("reading %p len %d\n", addr, len);
  while(len > 0)
  {
    int status, timeout;
    unsigned long b;
    
    timeout = 0x01FFFFFF;
    
    while(((status = STAT(iobase)) & 0x100)==0)
    {
      timeout--;
      if(status & 0x200 || !timeout)
      {
        printk("status = %08X\n",status);
        return 1;
      }
    }
    if(len >= 128)
    {
      inswb(iobase + 136, addr, 128);
      addr += 128;
      len -= 128;
    }
    else
    {
      b = (unsigned long) inw(iobase + 136);
      *addr ++ = b;
      len -= 1;
      if(len)
        *addr ++ = b>>8;
      len -= 1;
    }
  }
  return 0;
}

#define oakscsi_read(instance,reg)	(inb((instance)->io_port + (reg)))
#define oakscsi_write(instance,reg,val)	(outb((val), (instance)->io_port + (reg)))

#undef STAT

#include "../NCR5380.c"

static Scsi_Host_Template oakscsi_template = {
	.module			= THIS_MODULE,
	.proc_info		= oakscsi_proc_info,
	.name			= "Oak 16-bit SCSI",
	.info			= oakscsi_info,
	.queuecommand		= oakscsi_queue_command,
	.eh_abort_handler	= NCR5380_abort,
	.eh_bus_reset_handler	= NCR5380_bus_reset,
	.can_queue		= 16,
	.this_id		= 7,
	.sg_tablesize		= SG_ALL,
	.cmd_per_lun		= 2,
	.use_clustering		= DISABLE_CLUSTERING,
	.proc_name		= "oakscsi",
};

static int __devinit
oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
{
	struct Scsi_Host *host;
	int ret = -ENOMEM;

	host = scsi_host_alloc(&oakscsi_template, sizeof(struct NCR5380_hostdata));
	if (!host)
		goto out;

	host->io_port = ecard_address(ec, ECARD_MEMC, 0);
	host->irq = IRQ_NONE;
	host->n_io_port = 255;

	ret = -EBUSY;
	if (!request_region (host->io_port, host->n_io_port, "Oak SCSI"))
		goto unreg;

	NCR5380_init(host, 0);

	printk("scsi%d: at port 0x%08lx irqs disabled",
		host->host_no, host->io_port);
	printk(" options CAN_QUEUE=%d  CMD_PER_LUN=%d release=%d",
		host->can_queue, host->cmd_per_lun, OAKSCSI_PUBLIC_RELEASE);
	printk("\nscsi%d:", host->host_no);
	NCR5380_print_options(host);
	printk("\n");

	ret = scsi_add_host(host, &ec->dev);
	if (ret)
		goto out_release;

	scsi_scan_host(host);
	goto out;

 out_release:
	release_region(host->io_port, host->n_io_port);
 unreg:
	scsi_host_put(host);
 out:
	return ret;
}

static void __devexit oakscsi_remove(struct expansion_card *ec)
{
	struct Scsi_Host *host = ecard_get_drvdata(ec);

	ecard_set_drvdata(ec, NULL);
	scsi_remove_host(host);

	NCR5380_exit(host);
	release_region(host->io_port, host->n_io_port);
	scsi_host_put(host);
}

static const struct ecard_id oakscsi_cids[] = {
	{ MANU_OAK, PROD_OAK_SCSI },
	{ 0xffff, 0xffff }
};

static struct ecard_driver oakscsi_driver = {
	.probe		= oakscsi_probe,
	.remove		= __devexit_p(oakscsi_remove),
	.id_table	= oakscsi_cids,
	.drv = {
		.name		= "oakscsi",
	},
};

static int __init oakscsi_init(void)
{
	return ecard_register_driver(&oakscsi_driver);
}

static void __exit oakscsi_exit(void)
{
	ecard_remove_driver(&oakscsi_driver);
}

module_init(oakscsi_init);
module_exit(oakscsi_exit);

MODULE_AUTHOR("Russell King");
MODULE_DESCRIPTION("Oak SCSI driver");
MODULE_LICENSE("GPL");