Makefile 50.9 KB
Newer Older
L
Linus Torvalds 已提交
1 2
VERSION = 2
PATCHLEVEL = 6
L
Linus Torvalds 已提交
3 4
SUBLEVEL = 37
EXTRAVERSION = -rc1
L
Linus Torvalds 已提交
5
NAME = Flesh-Eating Bats with Fangs
L
Linus Torvalds 已提交
6 7 8 9 10 11 12

# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
# More info can be located in ./README
# Comments in this file are targeted only to the developer, do not
# expect to learn how to build the kernel reading this file.

13 14
# Do not:
# o  use make's built-in rules and variables
15
#    (this increases performance and avoids hard-to-debug behaviour);
16 17
# o  print "Entering directory ...";
MAKEFLAGS += -rR --no-print-directory
L
Linus Torvalds 已提交
18

19
# Avoid funny character set dependencies
20
unexport LC_ALL
21 22
LC_COLLATE=C
LC_NUMERIC=C
23
export LC_COLLATE LC_NUMERIC
24

L
Linus Torvalds 已提交
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43
# We are using a recursive build, so we need to do a little thinking
# to get the ordering right.
#
# Most importantly: sub-Makefiles should only ever modify files in
# their own directory. If in some directory we have a dependency on
# a file in another dir (which doesn't happen often, but it's often
# unavoidable when linking the built-in.o targets which finally
# turn into vmlinux), we will call a sub make in that other dir, and
# after that we are sure that everything which is in that other dir
# is now up to date.
#
# The only cases where we need to modify files which have global
# effects are thus separated out and done before the recursive
# descending is started. They are now explicitly listed as the
# prepare rule.

# To put more focus on warnings, be less verbose as default
# Use 'make V=1' to see the full commands

44 45
ifeq ("$(origin V)", "command line")
  KBUILD_VERBOSE = $(V)
L
Linus Torvalds 已提交
46 47 48 49 50
endif
ifndef KBUILD_VERBOSE
  KBUILD_VERBOSE = 0
endif

51 52 53 54 55 56 57 58 59
# Call a source code checker (by default, "sparse") as part of the
# C compilation.
#
# Use 'make C=1' to enable checking of only re-compiled files.
# Use 'make C=2' to enable checking of *all* source files, regardless
# of whether they are re-compiled or not.
#
# See the file "Documentation/sparse.txt" for more details, including
# where to get the "sparse" utility.
L
Linus Torvalds 已提交
60

61 62
ifeq ("$(origin C)", "command line")
  KBUILD_CHECKSRC = $(C)
L
Linus Torvalds 已提交
63 64 65 66 67 68 69 70 71 72 73 74
endif
ifndef KBUILD_CHECKSRC
  KBUILD_CHECKSRC = 0
endif

# Use make M=dir to specify directory of external module to build
# Old syntax make ... SUBDIRS=$PWD is still supported
# Setting the environment variable KBUILD_EXTMOD take precedence
ifdef SUBDIRS
  KBUILD_EXTMOD ?= $(SUBDIRS)
endif

75 76 77
ifeq ("$(origin M)", "command line")
  KBUILD_EXTMOD := $(M)
endif
L
Linus Torvalds 已提交
78 79 80 81 82 83

# kbuild supports saving output files in a separate directory.
# To locate output files in a separate directory two syntaxes are supported.
# In both cases the working directory must be the root of the kernel src.
# 1) O=
# Use "make O=dir/to/store/output/files/"
S
Sam Ravnborg 已提交
84
#
L
Linus Torvalds 已提交
85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
# 2) Set KBUILD_OUTPUT
# Set the environment variable KBUILD_OUTPUT to point to the directory
# where the output files shall be placed.
# export KBUILD_OUTPUT=dir/to/store/output/files/
# make
#
# The O= assignment takes precedence over the KBUILD_OUTPUT environment
# variable.


# KBUILD_SRC is set on invocation of make in OBJ directory
# KBUILD_SRC is not intended to be used by the regular user (for now)
ifeq ($(KBUILD_SRC),)

# OK, Make called in directory where kernel src resides
# Do we want to locate output files in a separate directory?
101 102
ifeq ("$(origin O)", "command line")
  KBUILD_OUTPUT := $(O)
L
Linus Torvalds 已提交
103 104 105
endif

# That's our default target when none is given on the command line
106
PHONY := _all
L
Linus Torvalds 已提交
107 108
_all:

109 110 111
# Cancel implicit rules on top Makefile
$(CURDIR)/Makefile Makefile: ;

L
Linus Torvalds 已提交
112 113 114 115 116 117 118 119
ifneq ($(KBUILD_OUTPUT),)
# Invoke a second make in the output directory, passing relevant variables
# check that the output directory actually exists
saved-output := $(KBUILD_OUTPUT)
KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
$(if $(KBUILD_OUTPUT),, \
     $(error output directory "$(saved-output)" does not exist))

120 121
PHONY += $(MAKECMDGOALS) sub-make

122
$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
123 124 125
	$(Q)@:

sub-make: FORCE
126 127
	$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
	KBUILD_SRC=$(CURDIR) \
128 129
	KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
	$(filter-out _all sub-make,$(MAKECMDGOALS))
L
Linus Torvalds 已提交
130 131 132 133 134 135 136 137 138 139 140

# Leave processing to above invocation of make
skip-makefile := 1
endif # ifneq ($(KBUILD_OUTPUT),)
endif # ifeq ($(KBUILD_SRC),)

# We process the rest of the Makefile if this is the final invocation of make
ifeq ($(skip-makefile),)

# If building an external module we do not care about the all: rule
# but instead _all depend on modules
141
PHONY += all
L
Linus Torvalds 已提交
142 143 144 145 146 147 148 149 150 151 152
ifeq ($(KBUILD_EXTMOD),)
_all: all
else
_all: modules
endif

srctree		:= $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
objtree		:= $(CURDIR)
src		:= $(srctree)
obj		:= $(objtree)

153
VPATH		:= $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
L
Linus Torvalds 已提交
154

155
export srctree objtree VPATH
L
Linus Torvalds 已提交
156 157 158 159 160 161 162 163 164 165


# SUBARCH tells the usermode build what the underlying arch is.  That is set
# first, and if a usermode build is happening, the "ARCH=um" on the command
# line overrides the setting of ARCH below.  If a native build is happening,
# then ARCH is assigned, getting whatever value it gets normally, and 
# SUBARCH is subsequently ignored.

SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
				  -e s/arm.*/arm/ -e s/sa110/arm/ \
166
				  -e s/s390x/s390/ -e s/parisc64/parisc/ \
P
Paul Mundt 已提交
167
				  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
168
				  -e s/sh[234].*/sh/ )
L
Linus Torvalds 已提交
169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185

# Cross compiling and selecting different set of gcc/bin-utils
# ---------------------------------------------------------------------------
#
# When performing cross compilation for other architectures ARCH shall be set
# to the target architecture. (See arch/* for the possibilities).
# ARCH can be set during invocation of make:
# make ARCH=ia64
# Another way is to have ARCH set in the environment.
# The default ARCH is the host where make is executed.

# CROSS_COMPILE specify the prefix used for all executables used
# during compilation. Only gcc and related bin-utils executables
# are prefixed with $(CROSS_COMPILE).
# CROSS_COMPILE can be set on the command line
# make CROSS_COMPILE=ia64-linux-
# Alternatively CROSS_COMPILE can be set in the environment.
R
Roland McGrath 已提交
186 187
# A third alternative is to store a setting in .config so that plain
# "make" in the configured kernel build directory always uses that.
L
Linus Torvalds 已提交
188 189
# Default value for CROSS_COMPILE is not to prefix executables
# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
190
export KBUILD_BUILDHOST := $(SUBARCH)
191
ARCH		?= $(SUBARCH)
R
Roland McGrath 已提交
192
CROSS_COMPILE	?= $(CONFIG_CROSS_COMPILE:"%"=%)
L
Linus Torvalds 已提交
193 194

# Architecture as present in compile.h
195 196
UTS_MACHINE 	:= $(ARCH)
SRCARCH 	:= $(ARCH)
L
Linus Torvalds 已提交
197

198 199 200 201 202 203 204
# Additional ARCH settings for x86
ifeq ($(ARCH),i386)
        SRCARCH := x86
endif
ifeq ($(ARCH),x86_64)
        SRCARCH := x86
endif
205

S
Sam Ravnborg 已提交
206
# Additional ARCH settings for sparc
N
Namhyung Kim 已提交
207 208 209
ifeq ($(ARCH),sparc32)
       SRCARCH := sparc
endif
210
ifeq ($(ARCH),sparc64)
S
Sam Ravnborg 已提交
211
       SRCARCH := sparc
212
endif
213

214 215 216 217 218
# Additional ARCH settings for sh
ifeq ($(ARCH),sh64)
       SRCARCH := sh
endif

S
Sam Ravnborg 已提交
219 220 221
# Where to locate arch specific headers
hdr-arch  := $(SRCARCH)

222 223 224 225
ifeq ($(ARCH),m68knommu)
       hdr-arch  := m68k
endif

R
Roman Zippel 已提交
226 227
KCONFIG_CONFIG	?= .config

L
Linus Torvalds 已提交
228 229 230 231 232
# SHELL used by kbuild
CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
	  else if [ -x /bin/bash ]; then echo /bin/bash; \
	  else echo sh; fi ; fi)

S
Sam Ravnborg 已提交
233 234
HOSTCC       = gcc
HOSTCXX      = g++
235
HOSTCFLAGS   = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer
S
Sam Ravnborg 已提交
236
HOSTCXXFLAGS = -O2
L
Linus Torvalds 已提交
237

S
Sam Ravnborg 已提交
238 239
# Decide whether to build built-in, modular, or both.
# Normally, just do built-in.
L
Linus Torvalds 已提交
240 241 242 243 244 245 246

KBUILD_MODULES :=
KBUILD_BUILTIN := 1

#	If we have only "make modules", don't compile built-in objects.
#	When we're building modules with modversions, we need to consider
#	the built-in objects during the descend as well, in order to
S
Sam Ravnborg 已提交
247
#	make sure the checksums are up to date before we record them.
L
Linus Torvalds 已提交
248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264

ifeq ($(MAKECMDGOALS),modules)
  KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
endif

#	If we have "make <whatever> modules", compile modules
#	in addition to whatever we do anyway.
#	Just "make" or "make all" shall build modules as well

ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
  KBUILD_MODULES := 1
endif

ifeq ($(MAKECMDGOALS),)
  KBUILD_MODULES := 1
endif

265
export KBUILD_MODULES KBUILD_BUILTIN
L
Linus Torvalds 已提交
266 267 268 269 270 271 272 273 274 275 276 277 278 279
export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD

# Beautify output
# ---------------------------------------------------------------------------
#
# Normally, we echo the whole command before executing it. By making
# that echo $($(quiet)$(cmd)), we now have the possibility to set
# $(quiet) to choose other forms of output instead, e.g.
#
#         quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
#         cmd_cc_o_c       = $(CC) $(c_flags) -c -o $@ $<
#
# If $(quiet) is empty, the whole command will be printed.
# If it is set to "quiet_", only the short version will be printed. 
S
Sam Ravnborg 已提交
280
# If it is set to "silent_", nothing will be printed at all, since
L
Linus Torvalds 已提交
281 282
# the variable $(silent_cmd_cc_o_c) doesn't exist.
#
A
Adrian Bunk 已提交
283
# A simple variant is to prefix commands with $(Q) - that's useful
L
Linus Torvalds 已提交
284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311
# for commands that shall be hidden in non-verbose mode.
#
#	$(Q)ln $@ :<
#
# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
# If KBUILD_VERBOSE equals 1 then the above command is displayed.

ifeq ($(KBUILD_VERBOSE),1)
  quiet =
  Q =
else
  quiet=quiet_
  Q = @
endif

# If the user is running make -s (silent mode), suppress echoing of
# commands

ifneq ($(findstring s,$(MAKEFLAGS)),)
  quiet=silent_
endif

export quiet Q KBUILD_VERBOSE


# Look for make include files relative to root of kernel src
MAKEFLAGS += --include-dir=$(srctree)

312 313
# We need some generic definitions (do not try to remake the file).
$(srctree)/scripts/Kbuild.include: ;
314
include $(srctree)/scripts/Kbuild.include
L
Linus Torvalds 已提交
315 316 317 318 319 320 321 322 323 324 325 326 327 328

# Make variables (CC, etc...)

AS		= $(CROSS_COMPILE)as
LD		= $(CROSS_COMPILE)ld
CC		= $(CROSS_COMPILE)gcc
CPP		= $(CC) -E
AR		= $(CROSS_COMPILE)ar
NM		= $(CROSS_COMPILE)nm
STRIP		= $(CROSS_COMPILE)strip
OBJCOPY		= $(CROSS_COMPILE)objcopy
OBJDUMP		= $(CROSS_COMPILE)objdump
AWK		= awk
GENKSYMS	= scripts/genksyms/genksyms
329
INSTALLKERNEL  := installkernel
L
Linus Torvalds 已提交
330 331 332 333 334
DEPMOD		= /sbin/depmod
KALLSYMS	= scripts/kallsyms
PERL		= perl
CHECK		= sparse

335 336
CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
		  -Wbitwise -Wno-return-void $(CF)
337 338 339
CFLAGS_MODULE   =
AFLAGS_MODULE   =
LDFLAGS_MODULE  =
L
Linus Torvalds 已提交
340 341
CFLAGS_KERNEL	=
AFLAGS_KERNEL	=
342
CFLAGS_GCOV	= -fprofile-arcs -ftest-coverage
L
Linus Torvalds 已提交
343 344 345 346


# Use LINUXINCLUDE when you must reference the include/ directory.
# Needed to be compatible with the O= option
347
LINUXINCLUDE    := -I$(srctree)/arch/$(hdr-arch)/include -Iinclude \
348
                   $(if $(KBUILD_SRC), -I$(srctree)/include) \
349
                   -include include/generated/autoconf.h
L
Linus Torvalds 已提交
350

351
KBUILD_CPPFLAGS := -D__KERNEL__
L
Linus Torvalds 已提交
352

353
KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
354
		   -fno-strict-aliasing -fno-common \
355
		   -Werror-implicit-function-declaration \
356 357
		   -Wno-format-security \
		   -fno-delete-null-pointer-checks
358 359
KBUILD_AFLAGS_KERNEL :=
KBUILD_CFLAGS_KERNEL :=
360
KBUILD_AFLAGS   := -D__ASSEMBLY__
361 362 363
KBUILD_AFLAGS_MODULE  := -DMODULE
KBUILD_CFLAGS_MODULE  := -DMODULE
KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
L
Linus Torvalds 已提交
364

R
Roman Zippel 已提交
365 366
# Read KERNELRELEASE from include/config/kernel.release (if it exists)
KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
367
KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
368

S
Sam Ravnborg 已提交
369
export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
370
export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
371 372
export CPP AR NM STRIP OBJCOPY OBJDUMP
export MAKE AWK GENKSYMS INSTALLKERNEL PERL UTS_MACHINE
S
Sam Ravnborg 已提交
373
export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
L
Linus Torvalds 已提交
374

375
export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
376
export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV
377
export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
378
export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
379
export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
L
Linus Torvalds 已提交
380 381 382 383 384 385 386 387

# When compiling out-of-tree modules, put MODVERDIR in the module
# tree rather than in the kernel tree. The kernel tree might
# even be read-only.
export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions

# Files to ignore in find ... statements

388 389
RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o
export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git
L
Linus Torvalds 已提交
390 391 392 393 394

# ===========================================================================
# Rules shared between *config targets and build targets

# Basic helpers built in scripts/
395
PHONY += scripts_basic
L
Linus Torvalds 已提交
396 397
scripts_basic:
	$(Q)$(MAKE) $(build)=scripts/basic
398
	$(Q)rm -f .tmp_quiet_recordmcount
L
Linus Torvalds 已提交
399

400 401 402
# To avoid any implicit rule to kick in, define an empty command.
scripts/basic/%: scripts_basic ;

403
PHONY += outputmakefile
404 405 406
# outputmakefile generates a Makefile in the output directory, if using a
# separate output directory. This allows convenient use of make in the
# output directory.
L
Linus Torvalds 已提交
407
outputmakefile:
408
ifneq ($(KBUILD_SRC),)
409
	$(Q)ln -fsn $(srctree) source
410 411 412
	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
	    $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
endif
L
Linus Torvalds 已提交
413 414 415 416 417

# To make sure we do not include .config for any of the *config targets
# catch them early, and hand them over to scripts/kconfig/Makefile
# It is allowed to specify more targets when calling make, including
# mixing *config targets and build targets.
S
Sam Ravnborg 已提交
418
# For example 'make oldconfig all'.
L
Linus Torvalds 已提交
419 420 421
# Detect when mixed targets is specified, and make a second invocation
# of make so .config is not included in this case either (for *config).

422
no-dot-config-targets := clean mrproper distclean \
423
			 cscope TAGS tags help %docs check% coccicheck \
424
			 include/linux/version.h headers_% \
425
			 kernelversion %src-pkg
L
Linus Torvalds 已提交
426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462

config-targets := 0
mixed-targets  := 0
dot-config     := 1

ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
	ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
		dot-config := 0
	endif
endif

ifeq ($(KBUILD_EXTMOD),)
        ifneq ($(filter config %config,$(MAKECMDGOALS)),)
                config-targets := 1
                ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
                        mixed-targets := 1
                endif
        endif
endif

ifeq ($(mixed-targets),1)
# ===========================================================================
# We're called with mixed targets (*config and build targets).
# Handle them one by one.

%:: FORCE
	$(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@

else
ifeq ($(config-targets),1)
# ===========================================================================
# *config targets only - make sure prerequisites are updated, and descend
# in scripts/kconfig to make the *config target

# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
# KBUILD_DEFCONFIG may point out an alternative default configuration
# used for 'make defconfig'
463
include $(srctree)/arch/$(SRCARCH)/Makefile
A
Al Viro 已提交
464
export KBUILD_DEFCONFIG KBUILD_KCONFIG
L
Linus Torvalds 已提交
465

S
Sam Ravnborg 已提交
466 467 468 469 470
config: scripts_basic outputmakefile FORCE
	$(Q)mkdir -p include/linux include/config
	$(Q)$(MAKE) $(build)=scripts/kconfig $@

%config: scripts_basic outputmakefile FORCE
R
Roman Zippel 已提交
471
	$(Q)mkdir -p include/linux include/config
L
Linus Torvalds 已提交
472 473 474 475 476 477 478 479 480 481
	$(Q)$(MAKE) $(build)=scripts/kconfig $@

else
# ===========================================================================
# Build targets only - this includes vmlinux, arch specific targets, clean
# targets and others. In general all targets except *config targets.

ifeq ($(KBUILD_EXTMOD),)
# Additional helpers built in scripts/
# Carefully list dependencies so we do not try to build scripts twice
S
Sam Ravnborg 已提交
482
# in parallel
483
PHONY += scripts
M
Michal Marek 已提交
484
scripts: scripts_basic include/config/auto.conf include/config/tristate.conf
L
Linus Torvalds 已提交
485 486 487 488
	$(Q)$(MAKE) $(build)=$(@)

# Objects we will link into vmlinux / subdirs we need to visit
init-y		:= init/
489
drivers-y	:= drivers/ sound/ firmware/
L
Linus Torvalds 已提交
490 491 492 493 494 495
net-y		:= net/
libs-y		:= lib/
core-y		:= usr/
endif # KBUILD_EXTMOD

ifeq ($(dot-config),1)
496 497
# Read in config
-include include/config/auto.conf
L
Linus Torvalds 已提交
498

499
ifeq ($(KBUILD_EXTMOD),)
L
Linus Torvalds 已提交
500 501
# Read in dependencies to all Kconfig* files, make sure to run
# oldconfig if changes are detected.
R
Roman Zippel 已提交
502
-include include/config/auto.conf.cmd
L
Linus Torvalds 已提交
503 504

# To avoid any implicit rule to kick in, define an empty command
R
Roman Zippel 已提交
505
$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
L
Linus Torvalds 已提交
506

R
Roman Zippel 已提交
507
# If .config is newer than include/config/auto.conf, someone tinkered
508
# with it and forgot to run make oldconfig.
S
Sam Ravnborg 已提交
509
# if auto.conf.cmd is missing then we are probably in a cleaned tree so
510
# we execute the config step to be sure to catch updated Kconfig files
M
Michal Marek 已提交
511
include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
L
Linus Torvalds 已提交
512
	$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
513
else
514
# external modules needs include/generated/autoconf.h and include/config/auto.conf
515 516 517 518
# but do not care if they are up-to-date. Use auto.conf to trigger the test
PHONY += include/config/auto.conf

include/config/auto.conf:
519
	$(Q)test -e include/generated/autoconf.h -a -e $@ || (		\
520 521
	echo;								\
	echo "  ERROR: Kernel configuration is invalid.";		\
522
	echo "         include/generated/autoconf.h or $@ are missing.";\
523 524 525 526 527
	echo "         Run 'make oldconfig && make prepare' on kernel src to fix it.";	\
	echo;								\
	/bin/false)

endif # KBUILD_EXTMOD
R
Roman Zippel 已提交
528

L
Linus Torvalds 已提交
529 530
else
# Dummy target needed, because used as prerequisite
R
Roman Zippel 已提交
531
include/config/auto.conf: ;
532
endif # $(dot-config)
L
Linus Torvalds 已提交
533 534 535 536

# The all: target is the default when no target is given on the
# command line.
# This allow a user to issue only 'make' to build a kernel including modules
M
Michal Marek 已提交
537
# Defaults to vmlinux, but the arch makefile usually adds further targets
L
Linus Torvalds 已提交
538 539 540
all: vmlinux

ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
541
KBUILD_CFLAGS	+= -Os
L
Linus Torvalds 已提交
542
else
543
KBUILD_CFLAGS	+= -O2
L
Linus Torvalds 已提交
544 545
endif

R
Ralf Baechle 已提交
546 547
include $(srctree)/arch/$(SRCARCH)/Makefile

548
ifneq ($(CONFIG_FRAME_WARN),0)
549 550 551
KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
endif

552
# Force gcc to behave correct even for buggy distributions
T
Tejun Heo 已提交
553
ifndef CONFIG_CC_STACKPROTECTOR
554
KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector)
T
Tejun Heo 已提交
555
endif
556

L
Linus Torvalds 已提交
557
ifdef CONFIG_FRAME_POINTER
558
KBUILD_CFLAGS	+= -fno-omit-frame-pointer -fno-optimize-sibling-calls
L
Linus Torvalds 已提交
559
else
560 561 562 563 564 565
# Some targets (ARM with Thumb2, for example), can't be built with frame
# pointers.  For those, we don't have FUNCTION_TRACER automatically
# select FRAME_POINTER.  However, FUNCTION_TRACER adds -pg, and this is
# incompatible with -fomit-frame-pointer with current GCC, so we don't use
# -fomit-frame-pointer with FUNCTION_TRACER.
ifndef CONFIG_FUNCTION_TRACER
566
KBUILD_CFLAGS	+= -fomit-frame-pointer
L
Linus Torvalds 已提交
567
endif
568
endif
L
Linus Torvalds 已提交
569 570

ifdef CONFIG_DEBUG_INFO
571
KBUILD_CFLAGS	+= -g
572
KBUILD_AFLAGS	+= -gdwarf-2
L
Linus Torvalds 已提交
573 574
endif

575 576 577 578
ifdef CONFIG_DEBUG_INFO_REDUCED
KBUILD_CFLAGS 	+= $(call cc-option, -femit-struct-debug-baseonly)
endif

579
ifdef CONFIG_FUNCTION_TRACER
580
KBUILD_CFLAGS	+= -pg
581
ifdef CONFIG_DYNAMIC_FTRACE
582
	ifdef CONFIG_HAVE_C_RECORDMCOUNT
583 584 585 586
		BUILD_C_RECORDMCOUNT := y
		export BUILD_C_RECORDMCOUNT
	endif
endif
587 588
endif

589 590 591 592 593
# We trigger additional mismatches with less inlining
ifdef CONFIG_DEBUG_SECTION_MISMATCH
KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
endif

594
# arch Makefile may override CC so keep this after arch Makefile is included
595
NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
596 597
CHECKFLAGS     += $(NOSTDINC_FLAGS)

L
Linus Torvalds 已提交
598
# warn about C99 declaration after statement
599
KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
L
Linus Torvalds 已提交
600

S
Sam Ravnborg 已提交
601
# disable pointer signed / unsigned warnings in gcc 4.0
602
KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,)
L
Linus Torvalds 已提交
603

604
# disable invalid "can't wrap" optimizations for signed / pointers
605
KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
606

607 608 609
# conserve stack if available
KBUILD_CFLAGS   += $(call cc-option,-fconserve-stack)

610 611 612 613 614
# check for 'asm goto'
ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y)
	KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
endif

615
# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631
# But warn user when we do so
warn-assign = \
$(warning "WARNING: Appending $$K$(1) ($(K$(1))) from $(origin K$(1)) to kernel $$$(1)")

ifneq ($(KCPPFLAGS),)
        $(call warn-assign,CPPFLAGS)
        KBUILD_CPPFLAGS += $(KCPPFLAGS)
endif
ifneq ($(KAFLAGS),)
        $(call warn-assign,AFLAGS)
        KBUILD_AFLAGS += $(KAFLAGS)
endif
ifneq ($(KCFLAGS),)
        $(call warn-assign,CFLAGS)
        KBUILD_CFLAGS += $(KCFLAGS)
endif
632

R
Roland McGrath 已提交
633 634
# Use --build-id when available.
LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
635
			      $(call cc-ldoption, -Wl$(comma)--build-id,))
636
KBUILD_LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
R
Roland McGrath 已提交
637 638
LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)

639
ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
640
LDFLAGS_vmlinux	+= $(call ld-option, -X,)
641 642
endif

L
Linus Torvalds 已提交
643
# Default kernel image to build when no specific target is given.
S
Sam Ravnborg 已提交
644
# KBUILD_IMAGE may be overruled on the command line or
L
Linus Torvalds 已提交
645 646 647 648 649 650 651 652 653 654 655 656 657
# set in the environment
# Also any assignments in arch/$(ARCH)/Makefile take precedence over
# this default value
export KBUILD_IMAGE ?= vmlinux

#
# INSTALL_PATH specifies where to place the updated kernel and system map
# images. Default is /boot, but you can set it to other values
export	INSTALL_PATH ?= /boot

#
# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
# relocations required by build roots.  This is not defined in the
S
Sam Ravnborg 已提交
658
# makefile but the argument can be passed to make if needed.
L
Linus Torvalds 已提交
659 660
#

661
MODLIB	= $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
L
Linus Torvalds 已提交
662 663
export MODLIB

664
#
665 666 667 668 669
#  INSTALL_MOD_STRIP, if defined, will cause modules to be
#  stripped after they are installed.  If INSTALL_MOD_STRIP is '1', then
#  the default option --strip-debug will be used.  Otherwise,
#  INSTALL_MOD_STRIP will used as the options to the strip command.

670 671
ifdef INSTALL_MOD_STRIP
ifeq ($(INSTALL_MOD_STRIP),1)
672
mod_strip_cmd = $(STRIP) --strip-debug
673
else
674
mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
675 676
endif # INSTALL_MOD_STRIP=1
else
677
mod_strip_cmd = true
678 679 680
endif # INSTALL_MOD_STRIP
export mod_strip_cmd

L
Linus Torvalds 已提交
681 682

ifeq ($(KBUILD_EXTMOD),)
683
core-y		+= kernel/ mm/ fs/ ipc/ security/ crypto/ block/
L
Linus Torvalds 已提交
684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703

vmlinux-dirs	:= $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
		     $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
		     $(net-y) $(net-m) $(libs-y) $(libs-m)))

vmlinux-alldirs	:= $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \
		     $(init-n) $(init-) \
		     $(core-n) $(core-) $(drivers-n) $(drivers-) \
		     $(net-n)  $(net-)  $(libs-n)    $(libs-))))

init-y		:= $(patsubst %/, %/built-in.o, $(init-y))
core-y		:= $(patsubst %/, %/built-in.o, $(core-y))
drivers-y	:= $(patsubst %/, %/built-in.o, $(drivers-y))
net-y		:= $(patsubst %/, %/built-in.o, $(net-y))
libs-y1		:= $(patsubst %/, %/lib.a, $(libs-y))
libs-y2		:= $(patsubst %/, %/built-in.o, $(libs-y))
libs-y		:= $(libs-y1) $(libs-y2)

# Build vmlinux
# ---------------------------------------------------------------------------
S
Sam Ravnborg 已提交
704
# vmlinux is built from the objects selected by $(vmlinux-init) and
L
Linus Torvalds 已提交
705
# $(vmlinux-main). Most are built-in.o files from top-level directories
706
# in the kernel tree, others are specified in arch/$(ARCH)/Makefile.
L
Linus Torvalds 已提交
707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731
# Ordering when linking is important, and $(vmlinux-init) must be first.
#
# vmlinux
#   ^
#   |
#   +-< $(vmlinux-init)
#   |   +--< init/version.o + more
#   |
#   +--< $(vmlinux-main)
#   |    +--< driver/built-in.o mm/built-in.o + more
#   |
#   +-< kallsyms.o (see description in CONFIG_KALLSYMS section)
#
# vmlinux version (uname -v) cannot be updated during normal
# descending-into-subdirs phase since we do not yet know if we need to
# update vmlinux.
# Therefore this step is delayed until just before final link of vmlinux -
# except in the kallsyms case where it is done just before adding the
# symbols to the kernel.
#
# System.map is generated to document addresses of all kernel symbols

vmlinux-init := $(head-y) $(init-y)
vmlinux-main := $(core-y) $(libs-y) $(drivers-y) $(net-y)
vmlinux-all  := $(vmlinux-init) $(vmlinux-main)
732
vmlinux-lds  := arch/$(SRCARCH)/kernel/vmlinux.lds
733
export KBUILD_VMLINUX_OBJS := $(vmlinux-all)
L
Linus Torvalds 已提交
734 735 736 737 738 739 740

# Rule to link vmlinux - also used during CONFIG_KALLSYMS
# May be overridden by arch/$(ARCH)/Makefile
quiet_cmd_vmlinux__ ?= LD      $@
      cmd_vmlinux__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) -o $@ \
      -T $(vmlinux-lds) $(vmlinux-init)                          \
      --start-group $(vmlinux-main) --end-group                  \
741
      $(filter-out $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o FORCE ,$^)
L
Linus Torvalds 已提交
742 743 744 745

# Generate new vmlinux version
quiet_cmd_vmlinux_version = GEN     .version
      cmd_vmlinux_version = set -e;                     \
746 747 748 749 750 751 752
	if [ ! -r .version ]; then			\
	  rm -f .version;				\
	  echo 1 >.version;				\
	else						\
	  mv .version .old_version;			\
	  expr 0$$(cat .old_version) + 1 >.version;	\
	fi;						\
L
Linus Torvalds 已提交
753 754 755
	$(MAKE) $(build)=init

# Generate System.map
S
Sam Ravnborg 已提交
756
quiet_cmd_sysmap = SYSMAP
L
Linus Torvalds 已提交
757 758 759 760 761
      cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap

# Link of vmlinux
# If CONFIG_KALLSYMS is set .version is already updated
# Generate System.map and verify that the content is consistent
762 763
# Use + in front of the vmlinux_version rule to silent warning with make -j2
# First command is ':' to allow us to use + in front of the rule
L
Linus Torvalds 已提交
764
define rule_vmlinux__
765
	:
L
Linus Torvalds 已提交
766 767 768 769 770
	$(if $(CONFIG_KALLSYMS),,+$(call cmd,vmlinux_version))

	$(call cmd,vmlinux__)
	$(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd

771 772 773 774 775 776
	$(Q)$(if $($(quiet)cmd_sysmap),                                      \
	  echo '  $($(quiet)cmd_sysmap)  System.map' &&)                     \
	$(cmd_sysmap) $@ System.map;                                         \
	if [ $$? -ne 0 ]; then                                               \
		rm -f $@;                                                    \
		/bin/false;                                                  \
L
Linus Torvalds 已提交
777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808
	fi;
	$(verify_kallsyms)
endef


ifdef CONFIG_KALLSYMS
# Generate section listing all symbols and add it into vmlinux $(kallsyms.o)
# It's a three stage process:
# o .tmp_vmlinux1 has all symbols and sections, but __kallsyms is
#   empty
#   Running kallsyms on that gives us .tmp_kallsyms1.o with
#   the right size - vmlinux version (uname -v) is updated during this step
# o .tmp_vmlinux2 now has a __kallsyms section of the right size,
#   but due to the added section, some addresses have shifted.
#   From here, we generate a correct .tmp_kallsyms2.o
# o The correct .tmp_kallsyms2.o is linked into the final vmlinux.
# o Verify that the System.map from vmlinux matches the map from
#   .tmp_vmlinux2, just in case we did not generate kallsyms correctly.
# o If CONFIG_KALLSYMS_EXTRA_PASS is set, do an extra pass using
#   .tmp_vmlinux3 and .tmp_kallsyms3.o.  This is only meant as a
#   temporary bypass to allow the kernel to be built while the
#   maintainers work out what went wrong with kallsyms.

ifdef CONFIG_KALLSYMS_EXTRA_PASS
last_kallsyms := 3
else
last_kallsyms := 2
endif

kallsyms.o := .tmp_kallsyms$(last_kallsyms).o

define verify_kallsyms
809 810
	$(Q)$(if $($(quiet)cmd_sysmap),                                      \
	  echo '  $($(quiet)cmd_sysmap)  .tmp_System.map' &&)                \
L
Linus Torvalds 已提交
811
	  $(cmd_sysmap) .tmp_vmlinux$(last_kallsyms) .tmp_System.map
812 813 814
	$(Q)cmp -s System.map .tmp_System.map ||                             \
		(echo Inconsistent kallsyms data;                            \
		 echo Try setting CONFIG_KALLSYMS_EXTRA_PASS;                \
L
Linus Torvalds 已提交
815 816 817 818 819
		 rm .tmp_kallsyms* ; /bin/false )
endef

# Update vmlinux version before link
# Use + in front of this rule to silent warning about make -j1
S
Sam Ravnborg 已提交
820
# First command is ':' to allow us to use + in front of this rule
L
Linus Torvalds 已提交
821 822
cmd_ksym_ld = $(cmd_vmlinux__)
define rule_ksym_ld
S
Sam Ravnborg 已提交
823
	: 
L
Linus Torvalds 已提交
824 825 826 827 828 829 830
	+$(call cmd,vmlinux_version)
	$(call cmd,vmlinux__)
	$(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
endef

# Generate .S file with all kernel symbols
quiet_cmd_kallsyms = KSYM    $@
831 832
      cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \
                     $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@
833

834
.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE
L
Linus Torvalds 已提交
835 836
	$(call if_changed_dep,as_o_S)

837
.tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS)
L
Linus Torvalds 已提交
838 839 840
	$(call cmd,kallsyms)

# .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version
841 842
.tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE
	$(call if_changed_rule,ksym_ld)
L
Linus Torvalds 已提交
843

844 845
.tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE
	$(call if_changed,vmlinux__)
L
Linus Torvalds 已提交
846

847 848
.tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE
	$(call if_changed,vmlinux__)
L
Linus Torvalds 已提交
849 850 851 852

# Needs to visit scripts/ before $(KALLSYMS) can be used.
$(KALLSYMS): scripts ;

S
Sam Ravnborg 已提交
853 854 855 856 857 858 859 860 861 862
# Generate some data for debugging strange kallsyms problems
debug_kallsyms: .tmp_map$(last_kallsyms)

.tmp_map%: .tmp_vmlinux% FORCE
	($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@

.tmp_map3: .tmp_map2

.tmp_map2: .tmp_map1

L
Linus Torvalds 已提交
863 864
endif # ifdef CONFIG_KALLSYMS

865 866 867 868 869
# Do modpost on a prelinked vmlinux. The finally linked vmlinux has
# relevant sections renamed as per the linker script.
quiet_cmd_vmlinux-modpost = LD      $@
      cmd_vmlinux-modpost = $(LD) $(LDFLAGS) -r -o $@                          \
	 $(vmlinux-init) --start-group $(vmlinux-main) --end-group             \
S
Sam Ravnborg 已提交
870
	 $(filter-out $(vmlinux-init) $(vmlinux-main) FORCE ,$^)
871 872 873 874 875 876 877
define rule_vmlinux-modpost
	:
	+$(call cmd,vmlinux-modpost)
	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost $@
	$(Q)echo 'cmd_$@ := $(cmd_vmlinux-modpost)' > $(dot-target).cmd
endef

L
Linus Torvalds 已提交
878
# vmlinux image - including updated kernel symbols
879
vmlinux: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o $(kallsyms.o) FORCE
880
ifdef CONFIG_HEADERS_CHECK
881
	$(Q)$(MAKE) -f $(srctree)/Makefile headers_check
M
Mathieu Desnoyers 已提交
882 883 884
endif
ifdef CONFIG_SAMPLES
	$(Q)$(MAKE) $(build)=samples
885 886 887
endif
ifdef CONFIG_BUILD_DOCSRC
	$(Q)$(MAKE) $(build)=Documentation
888
endif
889
	$(call vmlinux-modpost)
L
Linus Torvalds 已提交
890
	$(call if_changed_rule,vmlinux__)
891
	$(Q)rm -f .old_version
L
Linus Torvalds 已提交
892

893
# build vmlinux.o first to catch section mismatch errors early
S
Sam Ravnborg 已提交
894 895 896
ifdef CONFIG_KALLSYMS
.tmp_vmlinux1: vmlinux.o
endif
S
Sam Ravnborg 已提交
897 898 899

modpost-init := $(filter-out init/built-in.o, $(vmlinux-init))
vmlinux.o: $(modpost-init) $(vmlinux-main) FORCE
900 901
	$(call if_changed_rule,vmlinux-modpost)

L
Linus Torvalds 已提交
902 903 904 905 906 907 908 909 910 911
# The actual objects are generated when descending, 
# make sure no implicit rule kicks in
$(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ;

# Handle descending into subdirectories listed in $(vmlinux-dirs)
# Preset locale variables to speed up the build process. Limit locale
# tweaks to this spot to avoid wrong language settings when running
# make menuconfig etc.
# Error messages still appears in the original language

912
PHONY += $(vmlinux-dirs)
913
$(vmlinux-dirs): prepare scripts
L
Linus Torvalds 已提交
914 915
	$(Q)$(MAKE) $(build)=$@

R
Roman Zippel 已提交
916 917
# Store (new) KERNELRELASE string in include/config/kernel.release
include/config/kernel.release: include/config/auto.conf FORCE
918
	$(Q)rm -f $@
919
	$(Q)echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" > $@
920 921


L
Linus Torvalds 已提交
922
# Things we need to do before we recursively start building the kernel
923 924 925 926
# or the modules are listed in "prepare".
# A multi level approach is used. prepareN is processed before prepareN-1.
# archprepare is used in arch Makefiles and when processed asm symlink,
# version.h and scripts_basic is processed / created.
L
Linus Torvalds 已提交
927

928
# Listed in dependency order
929
PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
930

931
# prepare3 is used to check if we are building in a separate output directory,
L
Linus Torvalds 已提交
932 933
# and if so do:
# 1) Check that make has not been executed in the kernel src $(srctree)
R
Roman Zippel 已提交
934
prepare3: include/config/kernel.release
L
Linus Torvalds 已提交
935
ifneq ($(KBUILD_SRC),)
936
	@$(kecho) '  Using $(srctree) as source for kernel'
R
Roman Zippel 已提交
937
	$(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
L
Linus Torvalds 已提交
938 939 940 941 942 943
		echo "  $(srctree) is not clean, please run 'make mrproper'";\
		echo "  in the '$(srctree)' directory.";\
		/bin/false; \
	fi;
endif

944 945
# prepare2 creates a makefile if using a separate output directory
prepare2: prepare3 outputmakefile
L
Linus Torvalds 已提交
946

947
prepare1: prepare2 include/linux/version.h include/generated/utsrelease.h \
S
Sam Ravnborg 已提交
948
                   include/config/auto.conf
S
Sam Ravnborg 已提交
949
	$(cmd_crmodverdir)
L
Linus Torvalds 已提交
950

951 952 953
archprepare: prepare1 scripts_basic

prepare0: archprepare FORCE
954
	$(Q)$(MAKE) $(build)=.
955
	$(Q)$(MAKE) $(build)=. missing-syscalls
956

L
Linus Torvalds 已提交
957
# All the preparing..
958
prepare: prepare0
L
Linus Torvalds 已提交
959 960 961 962 963 964 965 966

# Generate some files
# ---------------------------------------------------------------------------

# KERNELRELEASE can change from a few different places, meaning version.h
# needs to be updated, so this check is forced on all builds

uts_len := 64
S
Sam Ravnborg 已提交
967 968 969 970 971 972 973
define filechk_utsrelease.h
	if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
	  echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2;    \
	  exit 1;                                                         \
	fi;                                                               \
	(echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";)
endef
L
Linus Torvalds 已提交
974 975

define filechk_version.h
S
Sam Ravnborg 已提交
976 977 978
	(echo \#define LINUX_VERSION_CODE $(shell                             \
	expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL));     \
	echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
L
Linus Torvalds 已提交
979 980
endef

S
Sam Ravnborg 已提交
981
include/linux/version.h: $(srctree)/Makefile FORCE
L
Linus Torvalds 已提交
982 983
	$(call filechk,version.h)

984
include/generated/utsrelease.h: include/config/kernel.release FORCE
S
Sam Ravnborg 已提交
985 986
	$(call filechk,utsrelease.h)

987 988 989 990
PHONY += headerdep
headerdep:
	$(Q)find include/ -name '*.h' | xargs --max-args 1 scripts/headerdep.pl

L
Linus Torvalds 已提交
991 992
# ---------------------------------------------------------------------------

993
PHONY += depend dep
L
Linus Torvalds 已提交
994 995 996
depend dep:
	@echo '*** Warning: make $@ is unnecessary now.'

997 998 999 1000 1001 1002 1003 1004 1005 1006
# ---------------------------------------------------------------------------
# Firmware install
INSTALL_FW_PATH=$(INSTALL_MOD_PATH)/lib/firmware
export INSTALL_FW_PATH

PHONY += firmware_install
firmware_install: FORCE
	@mkdir -p $(objtree)/firmware
	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_install

1007 1008 1009
# ---------------------------------------------------------------------------
# Kernel headers

1010 1011
#Default location for installed headers
export INSTALL_HDR_PATH = $(objtree)/usr
1012

1013
hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
1014 1015 1016

# If we do an all arch process set dst to asm-$(hdr-arch)
hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
1017 1018 1019

PHONY += __headers
__headers: include/linux/version.h scripts_basic FORCE
1020
	$(Q)$(MAKE) $(build)=scripts scripts/unifdef
1021 1022

PHONY += headers_install_all
1023 1024
headers_install_all:
	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh install
1025

1026
PHONY += headers_install
1027
headers_install: __headers
1028
	$(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/asm/Kbuild),, \
1029
	$(error Headers not exportable for the $(SRCARCH) architecture))
1030
	$(Q)$(MAKE) $(hdr-inst)=include
1031
	$(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst)
1032

1033 1034
PHONY += headers_check_all
headers_check_all: headers_install_all
1035
	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh check
1036

1037 1038
PHONY += headers_check
headers_check: headers_install
1039
	$(Q)$(MAKE) $(hdr-inst)=include HDRCHECK=1
1040
	$(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst) HDRCHECK=1
1041

L
Linus Torvalds 已提交
1042 1043 1044 1045 1046
# ---------------------------------------------------------------------------
# Modules

ifdef CONFIG_MODULES

S
Sam Ravnborg 已提交
1047
# By default, build modules as well
L
Linus Torvalds 已提交
1048

1049
all: modules
L
Linus Torvalds 已提交
1050 1051

#	Build modules
T
Tejun Heo 已提交
1052 1053 1054 1055
#
#	A module can be listed more than once in obj-m resulting in
#	duplicate lines in modules.order files.  Those are removed
#	using awk while concatenating to the final file.
L
Linus Torvalds 已提交
1056

1057
PHONY += modules
1058
modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
T
Tejun Heo 已提交
1059
	$(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
1060
	@$(kecho) '  Building modules, stage 2.';
S
Sam Ravnborg 已提交
1061
	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1062
	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
L
Linus Torvalds 已提交
1063

1064 1065 1066
modules.builtin: $(vmlinux-dirs:%=%/modules.builtin)
	$(Q)$(AWK) '!x[$$0]++' $^ > $(objtree)/modules.builtin

1067
%/modules.builtin: include/config/auto.conf
1068 1069
	$(Q)$(MAKE) $(modbuiltin)=$*

L
Linus Torvalds 已提交
1070 1071

# Target to prepare building external modules
1072
PHONY += modules_prepare
1073
modules_prepare: prepare scripts
L
Linus Torvalds 已提交
1074 1075

# Target to install modules
1076
PHONY += modules_install
L
Linus Torvalds 已提交
1077 1078
modules_install: _modinst_ _modinst_post

1079
PHONY += _modinst_
1080
_modinst_:
1081
	@if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
L
Linus Torvalds 已提交
1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093
		echo "Warning: you may need to install module-init-tools"; \
		echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\
		sleep 1; \
	fi
	@rm -rf $(MODLIB)/kernel
	@rm -f $(MODLIB)/source
	@mkdir -p $(MODLIB)/kernel
	@ln -s $(srctree) $(MODLIB)/source
	@if [ ! $(objtree) -ef  $(MODLIB)/build ]; then \
		rm -f $(MODLIB)/build ; \
		ln -s $(objtree) $(MODLIB)/build ; \
	fi
T
Tejun Heo 已提交
1094
	@cp -f $(objtree)/modules.order $(MODLIB)/
M
Michal Marek 已提交
1095
	@cp -f $(objtree)/modules.builtin $(MODLIB)/
S
Sam Ravnborg 已提交
1096
	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
L
Linus Torvalds 已提交
1097

1098
# This depmod is only for convenience to give the initial
L
Linus Torvalds 已提交
1099 1100
# boot a modules.dep even before / is mounted read-write.  However the
# boot script depmod is the master version.
1101
PHONY += _modinst_post
L
Linus Torvalds 已提交
1102
_modinst_post: _modinst_
1103
	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modinst
1104
	$(call cmd,depmod)
L
Linus Torvalds 已提交
1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133

else # CONFIG_MODULES

# Modules not configured
# ---------------------------------------------------------------------------

modules modules_install: FORCE
	@echo
	@echo "The present kernel configuration has modules disabled."
	@echo "Type 'make config' and enable loadable module support."
	@echo "Then build a kernel with module support enabled."
	@echo
	@exit 1

endif # CONFIG_MODULES

###
# Cleaning is done on three levels.
# make clean     Delete most generated files
#                Leave enough to build external modules
# make mrproper  Delete the current configuration, and all generated files
# make distclean Remove editor backup files, patch leftover files and the like

# Directories & files removed with 'make clean'
CLEAN_DIRS  += $(MODVERDIR)
CLEAN_FILES +=	vmlinux System.map \
                .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map

# Directories & files removed with 'make mrproper'
1134
MRPROPER_DIRS  += include/config usr/include include/generated
S
Sam Ravnborg 已提交
1135
MRPROPER_FILES += .config .config.old .version .old_version             \
1136
                  include/linux/version.h                               \
W
Wenji Huang 已提交
1137
		  Module.symvers tags TAGS cscope*
L
Linus Torvalds 已提交
1138 1139 1140 1141 1142

# clean - Delete most, but leave enough to build external modules
#
clean: rm-dirs  := $(CLEAN_DIRS)
clean: rm-files := $(CLEAN_FILES)
1143
clean-dirs      := $(addprefix _clean_, . $(vmlinux-alldirs) Documentation)
L
Linus Torvalds 已提交
1144

1145
PHONY += $(clean-dirs) clean archclean
L
Linus Torvalds 已提交
1146 1147 1148
$(clean-dirs):
	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)

1149
clean: archclean
L
Linus Torvalds 已提交
1150 1151 1152 1153 1154 1155 1156

# mrproper - Delete all generated files, including .config
#
mrproper: rm-dirs  := $(wildcard $(MRPROPER_DIRS))
mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
mrproper-dirs      := $(addprefix _mrproper_,Documentation/DocBook scripts)

1157
PHONY += $(mrproper-dirs) mrproper archmrproper
L
Linus Torvalds 已提交
1158 1159 1160 1161 1162 1163 1164 1165 1166
$(mrproper-dirs):
	$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)

mrproper: clean archmrproper $(mrproper-dirs)
	$(call cmd,rmdirs)
	$(call cmd,rmfiles)

# distclean
#
1167
PHONY += distclean
L
Linus Torvalds 已提交
1168 1169 1170

distclean: mrproper
	@find $(srctree) $(RCS_FIND_IGNORE) \
S
Sam Ravnborg 已提交
1171
		\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
L
Linus Torvalds 已提交
1172
		-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
S
Sam Ravnborg 已提交
1173
		-o -name '.*.rej' -o -size 0 \
L
Linus Torvalds 已提交
1174 1175 1176 1177 1178 1179 1180 1181 1182
		-o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
		-type f -print | xargs rm -f


# Packaging of the kernel to various formats
# ---------------------------------------------------------------------------
# rpm target kept for backward compatibility
package-dir	:= $(srctree)/scripts/package

1183 1184
%src-pkg: FORCE
	$(Q)$(MAKE) $(build)=$(package-dir) $@
1185
%pkg: include/config/kernel.release FORCE
S
Sam Ravnborg 已提交
1186
	$(Q)$(MAKE) $(build)=$(package-dir) $@
1187
rpm: include/config/kernel.release FORCE
S
Sam Ravnborg 已提交
1188
	$(Q)$(MAKE) $(build)=$(package-dir) $@
L
Linus Torvalds 已提交
1189 1190 1191 1192 1193


# Brief documentation of the typical targets used
# ---------------------------------------------------------------------------

1194
boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig)
L
Linus Torvalds 已提交
1195
boards := $(notdir $(boards))
1196 1197
board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig))
board-dirs := $(sort $(notdir $(board-dirs:/=)))
L
Linus Torvalds 已提交
1198 1199 1200

help:
	@echo  'Cleaning targets:'
1201
	@echo  '  clean		  - Remove most generated files but keep the config and'
1202
	@echo  '                    enough build support to build external modules'
1203
	@echo  '  mrproper	  - Remove all generated files + config + various backup files'
1204
	@echo  '  distclean	  - mrproper + remove editor backup and patch files'
L
Linus Torvalds 已提交
1205 1206 1207 1208 1209 1210 1211 1212
	@echo  ''
	@echo  'Configuration targets:'
	@$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
	@echo  ''
	@echo  'Other generic targets:'
	@echo  '  all		  - Build all targets marked with [*]'
	@echo  '* vmlinux	  - Build the bare kernel'
	@echo  '* modules	  - Build all modules'
1213
	@echo  '  modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
1214 1215
	@echo  '  firmware_install- Install all firmware to INSTALL_FW_PATH'
	@echo  '                    (default: $$(INSTALL_MOD_PATH)/lib/firmware)'
L
Linus Torvalds 已提交
1216
	@echo  '  dir/            - Build all files in dir and below'
1217 1218 1219
	@echo  '  dir/file.[oisS] - Build specified target only'
	@echo  '  dir/file.lst    - Build specified mixed source/assembly target only'
	@echo  '                    (requires a recent binutils and recent build (System.map))'
1220
	@echo  '  dir/file.ko     - Build module including final link'
1221
	@echo  '  modules_prepare - Set up for building external modules'
L
Linus Torvalds 已提交
1222 1223
	@echo  '  tags/TAGS	  - Generate tags file for editors'
	@echo  '  cscope	  - Generate cscope index'
1224
	@echo  '  kernelrelease	  - Output the release version string'
1225
	@echo  '  kernelversion	  - Output the version stored in Makefile'
1226
	@echo  '  headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
1227
	 echo  '                    (default: $(INSTALL_HDR_PATH))'; \
1228
	 echo  ''
L
Linus Torvalds 已提交
1229 1230 1231
	@echo  'Static analysers'
	@echo  '  checkstack      - Generate a list of stack hogs'
	@echo  '  namespacecheck  - Name space analysis on compiled kernel'
1232
	@echo  '  versioncheck    - Sanity check on version.h usage'
1233
	@echo  '  includecheck    - Check for duplicate included header files'
1234
	@echo  '  export_report   - List the usages of all exported symbols'
1235
	@echo  '  headers_check   - Sanity check on exported headers'
1236 1237 1238
	@echo  '  headerdep       - Detect inclusion cycles in headers'
	@$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help
	@echo  ''
L
Linus Torvalds 已提交
1239
	@echo  'Kernel packaging:'
S
Sam Ravnborg 已提交
1240
	@$(MAKE) $(build)=$(package-dir) help
L
Linus Torvalds 已提交
1241 1242 1243 1244
	@echo  ''
	@echo  'Documentation targets:'
	@$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp
	@echo  ''
1245
	@echo  'Architecture specific targets ($(SRCARCH)):'
L
Linus Torvalds 已提交
1246
	@$(if $(archhelp),$(archhelp),\
1247
		echo '  No architecture specific help defined for $(SRCARCH)')
L
Linus Torvalds 已提交
1248 1249 1250 1251 1252
	@echo  ''
	@$(if $(boards), \
		$(foreach b, $(boards), \
		printf "  %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \
		echo '')
1253 1254 1255 1256 1257
	@$(if $(board-dirs), \
		$(foreach b, $(board-dirs), \
		printf "  %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \
		printf "  %-16s - Show all of the above\\n" help-boards; \
		echo '')
L
Linus Torvalds 已提交
1258 1259

	@echo  '  make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1260
	@echo  '  make V=2   [targets] 2 => give reason for rebuild of target'
L
Linus Torvalds 已提交
1261
	@echo  '  make O=dir [targets] Locate all output files in "dir", including .config'
1262 1263
	@echo  '  make C=1   [targets] Check all c source with $$CHECK (sparse by default)'
	@echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
L
Linus Torvalds 已提交
1264 1265 1266 1267 1268
	@echo  ''
	@echo  'Execute "make" or "make all" to build all targets marked with [*] '
	@echo  'For further info see the ./README file'


1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282
help-board-dirs := $(addprefix help-,$(board-dirs))

help-boards: $(help-board-dirs)

boards-per-dir = $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig))

$(help-board-dirs): help-%:
	@echo  'Architecture specific targets ($(SRCARCH) $*):'
	@$(if $(boards-per-dir), \
		$(foreach b, $(boards-per-dir), \
		printf "  %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \
		echo '')


L
Linus Torvalds 已提交
1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303
# Documentation targets
# ---------------------------------------------------------------------------
%docs: scripts_basic FORCE
	$(Q)$(MAKE) $(build)=Documentation/DocBook $@

else # KBUILD_EXTMOD

###
# External module support.
# When building external modules the kernel used as basis is considered
# read-only, and no consistency checks are made and the make
# system is not used on the basis kernel. If updates are required
# in the basis kernel ordinary make commands (without M=...) must
# be used.
#
# The following are the only valid targets when building external
# modules.
# make M=dir clean     Delete all automatically generated files
# make M=dir modules   Make all modules in specified dir
# make M=dir	       Same as 'make M=dir modules'
# make M=dir modules_install
S
Sam Ravnborg 已提交
1304
#                      Install the modules built in the module directory
L
Linus Torvalds 已提交
1305 1306 1307 1308
#                      Assumes install directory is already created

# We are always building modules
KBUILD_MODULES := 1
1309
PHONY += crmodverdir
L
Linus Torvalds 已提交
1310
crmodverdir:
S
Sam Ravnborg 已提交
1311
	$(cmd_crmodverdir)
L
Linus Torvalds 已提交
1312

1313
PHONY += $(objtree)/Module.symvers
L
Linus Torvalds 已提交
1314 1315 1316 1317 1318 1319 1320 1321
$(objtree)/Module.symvers:
	@test -e $(objtree)/Module.symvers || ( \
	echo; \
	echo "  WARNING: Symbol version dump $(objtree)/Module.symvers"; \
	echo "           is missing; modules will have no dependencies and modversions."; \
	echo )

module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
1322
PHONY += $(module-dirs) modules
L
Linus Torvalds 已提交
1323 1324 1325 1326
$(module-dirs): crmodverdir $(objtree)/Module.symvers
	$(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)

modules: $(module-dirs)
1327
	@$(kecho) '  Building modules, stage 2.';
S
Sam Ravnborg 已提交
1328
	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
L
Linus Torvalds 已提交
1329

1330
PHONY += modules_install
1331
modules_install: _emodinst_ _emodinst_post
1332

1333 1334
install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
PHONY += _emodinst_
1335 1336
_emodinst_:
	$(Q)mkdir -p $(MODLIB)/$(install-dir)
S
Sam Ravnborg 已提交
1337
	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
L
Linus Torvalds 已提交
1338

1339
PHONY += _emodinst_post
1340 1341 1342
_emodinst_post: _emodinst_
	$(call cmd,depmod)

L
Linus Torvalds 已提交
1343 1344
clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))

1345
PHONY += $(clean-dirs) clean
L
Linus Torvalds 已提交
1346 1347 1348 1349
$(clean-dirs):
	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)

clean:	rm-dirs := $(MODVERDIR)
1350
clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
L
Linus Torvalds 已提交
1351 1352 1353 1354 1355 1356 1357 1358 1359

help:
	@echo  '  Building external modules.'
	@echo  '  Syntax: make -C path/to/kernel/src M=$$PWD target'
	@echo  ''
	@echo  '  modules         - default target, build the module(s)'
	@echo  '  modules_install - install the module'
	@echo  '  clean           - remove generated files in module directory only'
	@echo  ''
1360 1361

# Dummies...
1362
PHONY += prepare scripts
1363 1364
prepare: ;
scripts: ;
L
Linus Torvalds 已提交
1365 1366
endif # KBUILD_EXTMOD

1367 1368 1369 1370 1371 1372 1373 1374 1375 1376
clean: $(clean-dirs)
	$(call cmd,rmdirs)
	$(call cmd,rmfiles)
	@find $(or $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
		\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
		-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
		-o -name '*.symtypes' -o -name 'modules.order' \
		-o -name modules.builtin -o -name '.tmp_*.o.*' \
		-o -name '*.gcno' \) -type f -print | xargs rm -f

L
Linus Torvalds 已提交
1377 1378
# Generate tags for editors
# ---------------------------------------------------------------------------
1379 1380
quiet_cmd_tags = GEN     $@
      cmd_tags = $(CONFIG_SHELL) $(srctree)/scripts/tags.sh $@
L
Linus Torvalds 已提交
1381

1382
tags TAGS cscope: FORCE
L
Linus Torvalds 已提交
1383 1384 1385 1386 1387 1388 1389 1390
	$(call cmd,tags)

# Scripts to check various things for consistency
# ---------------------------------------------------------------------------

includecheck:
	find * $(RCS_FIND_IGNORE) \
		-name '*.[hcS]' -type f -print | sort \
1391
		| xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl
L
Linus Torvalds 已提交
1392 1393 1394 1395

versioncheck:
	find * $(RCS_FIND_IGNORE) \
		-name '*.[hcS]' -type f -print | sort \
1396
		| xargs $(PERL) -w $(srctree)/scripts/checkversion.pl
L
Linus Torvalds 已提交
1397

1398 1399 1400
coccicheck:
	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@

L
Linus Torvalds 已提交
1401 1402 1403
namespacecheck:
	$(PERL) $(srctree)/scripts/namespace.pl

1404 1405 1406
export_report:
	$(PERL) $(srctree)/scripts/export_report.pl

L
Linus Torvalds 已提交
1407 1408 1409
endif #ifeq ($(config-targets),1)
endif #ifeq ($(mixed-targets),1)

1410
PHONY += checkstack kernelrelease kernelversion
J
Jeff Dike 已提交
1411

J
Jeff Dike 已提交
1412 1413 1414 1415 1416 1417 1418 1419 1420
# UML needs a little special treatment here.  It wants to use the host
# toolchain, so needs $(SUBARCH) passed to checkstack.pl.  Everyone
# else wants $(ARCH), including people doing cross-builds, which means
# that $(SUBARCH) doesn't work here.
ifeq ($(ARCH), um)
CHECKSTACK_ARCH := $(SUBARCH)
else
CHECKSTACK_ARCH := $(ARCH)
endif
L
Linus Torvalds 已提交
1421 1422
checkstack:
	$(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
J
Jeff Dike 已提交
1423
	$(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
L
Linus Torvalds 已提交
1424

1425 1426
kernelrelease:
	@echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1427

1428
kernelversion:
1429
	@echo $(KERNELVERSION)
L
Linus Torvalds 已提交
1430

1431 1432
# Single targets
# ---------------------------------------------------------------------------
1433
# Single targets are compatible with:
R
Robert P. J. Day 已提交
1434
# - build with mixed source and output
1435 1436 1437 1438 1439 1440 1441
# - build with separate output dir 'make O=...'
# - external modules
#
#  target-dir => where to store outputfile
#  build-dir  => directory in kernel source tree to use

ifeq ($(KBUILD_EXTMOD),)
S
Sam Ravnborg 已提交
1442
        build-dir  = $(patsubst %/,%,$(dir $@))
1443 1444 1445 1446 1447 1448 1449
        target-dir = $(dir $@)
else
        zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
        build-dir  = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
        target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
endif

1450
%.s: %.c prepare scripts FORCE
1451
	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1452
%.i: %.c prepare scripts FORCE
1453
	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1454
%.o: %.c prepare scripts FORCE
1455
	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1456
%.lst: %.c prepare scripts FORCE
1457
	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1458
%.s: %.S prepare scripts FORCE
1459
	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1460
%.o: %.S prepare scripts FORCE
1461
	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1462 1463
%.symtypes: %.c prepare scripts FORCE
	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1464

1465
# Modules
S
Sam Ravnborg 已提交
1466 1467 1468 1469 1470
/: prepare scripts FORCE
	$(cmd_crmodverdir)
	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
	$(build)=$(build-dir)
%/: prepare scripts FORCE
S
Sam Ravnborg 已提交
1471
	$(cmd_crmodverdir)
1472
	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1473 1474
	$(build)=$(build-dir)
%.ko: prepare scripts FORCE
S
Sam Ravnborg 已提交
1475
	$(cmd_crmodverdir)
1476
	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1)   \
1477
	$(build)=$(build-dir) $(@:.ko=.o)
S
Sam Ravnborg 已提交
1478
	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1479

L
Linus Torvalds 已提交
1480 1481 1482 1483 1484 1485 1486 1487 1488
# FIXME Should go into a make.lib or something 
# ===========================================================================

quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN   $(wildcard $(rm-dirs)))
      cmd_rmdirs = rm -rf $(rm-dirs)

quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files)))
      cmd_rmfiles = rm -f $(rm-files)

1489
# Run depmod only if we have System.map and depmod is executable
1490 1491
quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
      cmd_depmod = \
1492
	if [ -r System.map -a -x $(DEPMOD) ]; then                              \
1493
		$(DEPMOD) -ae -F System.map                                     \
1494
		$(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) )     \
1495 1496 1497
		$(KERNELRELEASE);                                               \
	fi

S
Sam Ravnborg 已提交
1498
# Create temporary dir for module support files
1499 1500 1501
# clean it up only when building all modules
cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \
                  $(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*)
L
Linus Torvalds 已提交
1502

1503
a_flags = -Wp,-MD,$(depfile) $(KBUILD_AFLAGS) $(AFLAGS_KERNEL) \
1504
	  $(KBUILD_AFLAGS_KERNEL)                              \
1505
	  $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(KBUILD_CPPFLAGS) \
1506
	  $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(basetarget).o)
L
Linus Torvalds 已提交
1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527

quiet_cmd_as_o_S = AS      $@
cmd_as_o_S       = $(CC) $(a_flags) -c -o $@ $<

# read all saved command lines

targets := $(wildcard $(sort $(targets)))
cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))

ifneq ($(cmd_files),)
  $(cmd_files): ;	# Do not try to update included dependency files
  include $(cmd_files)
endif

# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
# Usage:
# $(Q)$(MAKE) $(clean)=dir
clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj

endif	# skip-makefile

1528
PHONY += FORCE
L
Linus Torvalds 已提交
1529
FORCE:
1530 1531

# Declare the contents of the .PHONY variable as phony.  We keep that
1532
# information in a variable so we can use it in if_changed and friends.
1533
.PHONY: $(PHONY)