bcm-cygnus.dtsi 3.9 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140
/*
 *  BSD LICENSE
 *
 *  Copyright(c) 2014 Broadcom Corporation.  All rights reserved.
 *
 *  Redistribution and use in source and binary forms, with or without
 *  modification, are permitted provided that the following conditions
 *  are met:
 *
 *    * Redistributions of source code must retain the above copyright
 *      notice, this list of conditions and the following disclaimer.
 *    * Redistributions in binary form must reproduce the above copyright
 *      notice, this list of conditions and the following disclaimer in
 *      the documentation and/or other materials provided with the
 *      distribution.
 *    * Neither the name of Broadcom Corporation nor the names of its
 *      contributors may be used to endorse or promote products derived
 *      from this software without specific prior written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>

#include "skeleton.dtsi"

/ {
	compatible = "brcm,cygnus";
	model = "Broadcom Cygnus SoC";
	interrupt-parent = <&gic>;

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a9";
			next-level-cache = <&L2>;
			reg = <0x0>;
		};
	};

	/include/ "bcm-cygnus-clock.dtsi"

	amba {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "arm,amba-bus", "simple-bus";
		interrupt-parent = <&gic>;
		ranges;

		wdt@18009000 {
			 compatible = "arm,sp805" , "arm,primecell";
			 reg = <0x18009000 0x1000>;
			 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
			 clocks = <&axi81_clk>;
			 clock-names = "apb_pclk";
		};
	};

	uart0: serial@18020000 {
		compatible = "snps,dw-apb-uart";
		reg = <0x18020000 0x100>;
		reg-shift = <2>;
		reg-io-width = <4>;
		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&axi81_clk>;
		clock-frequency = <100000000>;
		status = "disabled";
	};

	uart1: serial@18021000 {
		compatible = "snps,dw-apb-uart";
		reg = <0x18021000 0x100>;
		reg-shift = <2>;
		reg-io-width = <4>;
		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&axi81_clk>;
		clock-frequency = <100000000>;
		status = "disabled";
	};

	uart2: serial@18022000 {
		compatible = "snps,dw-apb-uart";
		reg = <0x18020000 0x100>;
		reg-shift = <2>;
		reg-io-width = <4>;
		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&axi81_clk>;
		clock-frequency = <100000000>;
		status = "disabled";
	};

	uart3: serial@18023000 {
		compatible = "snps,dw-apb-uart";
		reg = <0x18023000 0x100>;
		reg-shift = <2>;
		reg-io-width = <4>;
		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&axi81_clk>;
		clock-frequency = <100000000>;
		status = "disabled";
	};

	gic: interrupt-controller@19021000 {
		compatible = "arm,cortex-a9-gic";
		#interrupt-cells = <3>;
		#address-cells = <0>;
		interrupt-controller;
		reg = <0x19021000 0x1000>,
		      <0x19020100 0x100>;
	};

	L2: l2-cache {
		compatible = "arm,pl310-cache";
		reg = <0x19022000 0x1000>;
		cache-unified;
		cache-level = <2>;
	};

	timer@19020200 {
		compatible = "arm,cortex-a9-global-timer";
		reg = <0x19020200 0x100>;
		interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&periph_clk>;
	};

};