cpuidle.c 6.5 KB
Newer Older
J
Jaecheol Lee 已提交
1 2 3 4 5 6 7 8 9 10 11 12 13
/* linux/arch/arm/mach-exynos4/cpuidle.c
 *
 * Copyright (c) 2011 Samsung Electronics Co., Ltd.
 *		http://www.samsung.com
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
*/

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/cpuidle.h>
14
#include <linux/cpu_pm.h>
J
Jaecheol Lee 已提交
15
#include <linux/io.h>
16
#include <linux/export.h>
17
#include <linux/module.h>
18
#include <linux/time.h>
19
#include <linux/platform_device.h>
J
Jaecheol Lee 已提交
20 21

#include <asm/proc-fns.h>
22 23 24
#include <asm/smp_scu.h>
#include <asm/suspend.h>
#include <asm/unified.h>
25
#include <asm/cpuidle.h>
26 27

#include <plat/cpu.h>
28
#include <plat/pm.h>
29

30 31 32
#include <mach/pm-core.h>
#include <mach/map.h>

33
#include "common.h"
34
#include "regs-pmu.h"
35

36 37 38 39 40 41 42 43
#define REG_DIRECTGO_ADDR	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
			S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
			(S5P_VA_SYSRAM + 0x24) : S5P_INFORM0))
#define REG_DIRECTGO_FLAG	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
			S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
			(S5P_VA_SYSRAM + 0x20) : S5P_INFORM1))

#define S5P_CHECK_AFTR		0xFCBA0D10
J
Jaecheol Lee 已提交
44

45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
#define EXYNOS5_PWR_CTRL1			(S5P_VA_CMU + 0x01020)
#define EXYNOS5_PWR_CTRL2			(S5P_VA_CMU + 0x01024)

#define PWR_CTRL1_CORE2_DOWN_RATIO		(7 << 28)
#define PWR_CTRL1_CORE1_DOWN_RATIO		(7 << 16)
#define PWR_CTRL1_DIV2_DOWN_EN			(1 << 9)
#define PWR_CTRL1_DIV1_DOWN_EN			(1 << 8)
#define PWR_CTRL1_USE_CORE1_WFE			(1 << 5)
#define PWR_CTRL1_USE_CORE0_WFE			(1 << 4)
#define PWR_CTRL1_USE_CORE1_WFI			(1 << 1)
#define PWR_CTRL1_USE_CORE0_WFI			(1 << 0)

#define PWR_CTRL2_DIV2_UP_EN			(1 << 25)
#define PWR_CTRL2_DIV1_UP_EN			(1 << 24)
#define PWR_CTRL2_DUR_STANDBY2_VAL		(1 << 16)
#define PWR_CTRL2_DUR_STANDBY1_VAL		(1 << 8)
#define PWR_CTRL2_CORE2_UP_RATIO		(1 << 4)
#define PWR_CTRL2_CORE1_UP_RATIO		(1 << 0)

64 65 66
static int exynos4_enter_lowpower(struct cpuidle_device *dev,
				struct cpuidle_driver *drv,
				int index);
J
Jaecheol Lee 已提交
67 68 69 70

static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device);

static struct cpuidle_driver exynos4_idle_driver = {
71 72
	.name			= "exynos4_idle",
	.owner			= THIS_MODULE,
73 74 75 76 77 78 79 80 81 82 83 84 85
	.states = {
		[0] = ARM_CPUIDLE_WFI_STATE,
		[1] = {
			.enter			= exynos4_enter_lowpower,
			.exit_latency		= 300,
			.target_residency	= 100000,
			.flags			= CPUIDLE_FLAG_TIME_VALID,
			.name			= "C1",
			.desc			= "ARM power down",
		},
	},
	.state_count = 2,
	.safe_state_index = 0,
J
Jaecheol Lee 已提交
86 87
};

88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128
/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
static void exynos4_set_wakeupmask(void)
{
	__raw_writel(0x0000ff3e, S5P_WAKEUP_MASK);
}

static unsigned int g_pwr_ctrl, g_diag_reg;

static void save_cpu_arch_register(void)
{
	/*read power control register*/
	asm("mrc p15, 0, %0, c15, c0, 0" : "=r"(g_pwr_ctrl) : : "cc");
	/*read diagnostic register*/
	asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc");
	return;
}

static void restore_cpu_arch_register(void)
{
	/*write power control register*/
	asm("mcr p15, 0, %0, c15, c0, 0" : : "r"(g_pwr_ctrl) : "cc");
	/*write diagnostic register*/
	asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc");
	return;
}

static int idle_finisher(unsigned long flags)
{
	cpu_do_idle();
	return 1;
}

static int exynos4_enter_core0_aftr(struct cpuidle_device *dev,
				struct cpuidle_driver *drv,
				int index)
{
	unsigned long tmp;

	exynos4_set_wakeupmask();

	/* Set value of power down register for aftr mode */
129
	exynos_sys_powerdown_conf(SYS_AFTR);
130 131 132 133 134 135 136 137 138 139 140 141 142 143 144

	__raw_writel(virt_to_phys(s3c_cpu_resume), REG_DIRECTGO_ADDR);
	__raw_writel(S5P_CHECK_AFTR, REG_DIRECTGO_FLAG);

	save_cpu_arch_register();

	/* Setting Central Sequence Register for power down mode */
	tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
	__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);

	cpu_pm_enter();
	cpu_suspend(0, idle_finisher);

#ifdef CONFIG_SMP
145 146
	if (!soc_is_exynos5250())
		scu_enable(S5P_VA_SCU);
147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166
#endif
	cpu_pm_exit();

	restore_cpu_arch_register();

	/*
	 * If PMU failed while entering sleep mode, WFI will be
	 * ignored by PMU and then exiting cpu_do_idle().
	 * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
	 * in this situation.
	 */
	tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
	if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
		tmp |= S5P_CENTRAL_LOWPWR_CFG;
		__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
	}

	/* Clear wakeup state register */
	__raw_writel(0x0, S5P_WAKEUP_STAT);

167
	return index;
J
Jaecheol Lee 已提交
168 169
}

170 171 172 173 174 175
static int exynos4_enter_lowpower(struct cpuidle_device *dev,
				struct cpuidle_driver *drv,
				int index)
{
	int new_index = index;

176 177
	/* AFTR can only be entered when cores other than CPU0 are offline */
	if (num_online_cpus() > 1 || dev->cpu != 0)
178 179 180
		new_index = drv->safe_state_index;

	if (new_index == 0)
181
		return arm_cpuidle_simple_enter(dev, drv, new_index);
182 183 184 185
	else
		return exynos4_enter_core0_aftr(dev, drv, new_index);
}

186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217
static void __init exynos5_core_down_clk(void)
{
	unsigned int tmp;

	/*
	 * Enable arm clock down (in idle) and set arm divider
	 * ratios in WFI/WFE state.
	 */
	tmp = PWR_CTRL1_CORE2_DOWN_RATIO | \
	      PWR_CTRL1_CORE1_DOWN_RATIO | \
	      PWR_CTRL1_DIV2_DOWN_EN	 | \
	      PWR_CTRL1_DIV1_DOWN_EN	 | \
	      PWR_CTRL1_USE_CORE1_WFE	 | \
	      PWR_CTRL1_USE_CORE0_WFE	 | \
	      PWR_CTRL1_USE_CORE1_WFI	 | \
	      PWR_CTRL1_USE_CORE0_WFI;
	__raw_writel(tmp, EXYNOS5_PWR_CTRL1);

	/*
	 * Enable arm clock up (on exiting idle). Set arm divider
	 * ratios when not in idle along with the standby duration
	 * ratios.
	 */
	tmp = PWR_CTRL2_DIV2_UP_EN	 | \
	      PWR_CTRL2_DIV1_UP_EN	 | \
	      PWR_CTRL2_DUR_STANDBY2_VAL | \
	      PWR_CTRL2_DUR_STANDBY1_VAL | \
	      PWR_CTRL2_CORE2_UP_RATIO	 | \
	      PWR_CTRL2_CORE1_UP_RATIO;
	__raw_writel(tmp, EXYNOS5_PWR_CTRL2);
}

218
static int exynos_cpuidle_probe(struct platform_device *pdev)
J
Jaecheol Lee 已提交
219
{
220
	int cpu_id, ret;
J
Jaecheol Lee 已提交
221
	struct cpuidle_device *device;
222

223 224 225
	if (soc_is_exynos5250())
		exynos5_core_down_clk();

226 227 228
	if (soc_is_exynos5440())
		exynos4_idle_driver.state_count = 1;

229 230
	ret = cpuidle_register_driver(&exynos4_idle_driver);
	if (ret) {
231
		dev_err(&pdev->dev, "failed to register cpuidle driver\n");
232
		return ret;
233
	}
J
Jaecheol Lee 已提交
234

235
	for_each_online_cpu(cpu_id) {
J
Jaecheol Lee 已提交
236 237 238
		device = &per_cpu(exynos4_cpuidle_device, cpu_id);
		device->cpu = cpu_id;

239 240
		ret = cpuidle_register_device(device);
		if (ret) {
241
			dev_err(&pdev->dev, "failed to register cpuidle device\n");
242
			return ret;
J
Jaecheol Lee 已提交
243 244
		}
	}
245

J
Jaecheol Lee 已提交
246 247
	return 0;
}
248 249 250 251 252 253 254 255 256 257

static struct platform_driver exynos_cpuidle_driver = {
	.probe	= exynos_cpuidle_probe,
	.driver = {
		.name = "exynos_cpuidle",
		.owner = THIS_MODULE,
	},
};

module_platform_driver(exynos_cpuidle_driver);