phy.h 21.5 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
/*
 * Framework and drivers for configuring and reading different PHYs
 * Based on code in sungem_phy.c and gianfar_phy.c
 *
 * Author: Andy Fleming
 *
 * Copyright (c) 2004 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 *
 */

#ifndef __PHY_H
#define __PHY_H

#include <linux/spinlock.h>
20 21 22 23
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/timer.h>
#include <linux/workqueue.h>
24
#include <linux/mod_devicetable.h>
25

A
Arun Sharma 已提交
26
#include <linux/atomic.h>
27

28
#define PHY_DEFAULT_FEATURES	(SUPPORTED_Autoneg | \
29 30 31
				 SUPPORTED_TP | \
				 SUPPORTED_MII)

32 33 34 35 36 37 38
#define PHY_10BT_FEATURES	(SUPPORTED_10baseT_Half | \
				 SUPPORTED_10baseT_Full)

#define PHY_100BT_FEATURES	(SUPPORTED_100baseT_Half | \
				 SUPPORTED_100baseT_Full)

#define PHY_1000BT_FEATURES	(SUPPORTED_1000baseT_Half | \
39 40
				 SUPPORTED_1000baseT_Full)

41 42 43 44 45 46 47 48
#define PHY_BASIC_FEATURES	(PHY_10BT_FEATURES | \
				 PHY_100BT_FEATURES | \
				 PHY_DEFAULT_FEATURES)

#define PHY_GBIT_FEATURES	(PHY_BASIC_FEATURES | \
				 PHY_1000BT_FEATURES)


A
Andy Fleming 已提交
49 50
/*
 * Set phydev->irq to PHY_POLL if interrupts are not supported,
51 52 53 54 55 56 57 58
 * or not desired for this PHY.  Set to PHY_IGNORE_INTERRUPT if
 * the attached driver handles the interrupt
 */
#define PHY_POLL		-1
#define PHY_IGNORE_INTERRUPT	-2

#define PHY_HAS_INTERRUPT	0x00000001
#define PHY_HAS_MAGICANEG	0x00000002
59
#define PHY_IS_INTERNAL		0x00000004
60

61 62
/* Interface Mode definitions */
typedef enum {
63
	PHY_INTERFACE_MODE_NA,
64 65 66 67
	PHY_INTERFACE_MODE_MII,
	PHY_INTERFACE_MODE_GMII,
	PHY_INTERFACE_MODE_SGMII,
	PHY_INTERFACE_MODE_TBI,
68
	PHY_INTERFACE_MODE_REVMII,
69 70
	PHY_INTERFACE_MODE_RMII,
	PHY_INTERFACE_MODE_RGMII,
71
	PHY_INTERFACE_MODE_RGMII_ID,
72 73
	PHY_INTERFACE_MODE_RGMII_RXID,
	PHY_INTERFACE_MODE_RGMII_TXID,
74 75
	PHY_INTERFACE_MODE_RTBI,
	PHY_INTERFACE_MODE_SMII,
76
	PHY_INTERFACE_MODE_XGMII,
F
Florian Fainelli 已提交
77
	PHY_INTERFACE_MODE_MOCA,
78
	PHY_INTERFACE_MODE_MAX,
79 80
} phy_interface_t;

81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116
/**
 * It maps 'enum phy_interface_t' found in include/linux/phy.h
 * into the device tree binding of 'phy-mode', so that Ethernet
 * device driver can get phy interface from device tree.
 */
static inline const char *phy_modes(phy_interface_t interface)
{
	switch (interface) {
	case PHY_INTERFACE_MODE_NA:
		return "";
	case PHY_INTERFACE_MODE_MII:
		return "mii";
	case PHY_INTERFACE_MODE_GMII:
		return "gmii";
	case PHY_INTERFACE_MODE_SGMII:
		return "sgmii";
	case PHY_INTERFACE_MODE_TBI:
		return "tbi";
	case PHY_INTERFACE_MODE_REVMII:
		return "rev-mii";
	case PHY_INTERFACE_MODE_RMII:
		return "rmii";
	case PHY_INTERFACE_MODE_RGMII:
		return "rgmii";
	case PHY_INTERFACE_MODE_RGMII_ID:
		return "rgmii-id";
	case PHY_INTERFACE_MODE_RGMII_RXID:
		return "rgmii-rxid";
	case PHY_INTERFACE_MODE_RGMII_TXID:
		return "rgmii-txid";
	case PHY_INTERFACE_MODE_RTBI:
		return "rtbi";
	case PHY_INTERFACE_MODE_SMII:
		return "smii";
	case PHY_INTERFACE_MODE_XGMII:
		return "xgmii";
F
Florian Fainelli 已提交
117 118
	case PHY_INTERFACE_MODE_MOCA:
		return "moca";
119 120 121 122 123
	default:
		return "unknown";
	}
}

124

125
#define PHY_INIT_TIMEOUT	100000
126 127 128 129
#define PHY_STATE_TIME		1
#define PHY_FORCE_TIMEOUT	10
#define PHY_AN_TIMEOUT		10

130
#define PHY_MAX_ADDR	32
131

132
/* Used when trying to connect to a specific phy (mii bus id:phy device id) */
133 134 135 136 137 138
#define PHY_ID_FMT "%s:%02x"

/*
 * Need to be a little smaller than phydev->dev.bus_id to leave room
 * for the ":%02x"
 */
139
#define MII_BUS_ID_SIZE	(20 - 3)
140

141 142 143 144
/* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit
   IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */
#define MII_ADDR_C45 (1<<30)

145 146 147
struct device;
struct sk_buff;

A
Andy Fleming 已提交
148 149 150 151
/*
 * The Bus class for PHYs.  Devices which provide access to
 * PHYs should register using this structure
 */
152 153
struct mii_bus {
	const char *name;
154
	char id[MII_BUS_ID_SIZE];
155 156 157 158 159
	void *priv;
	int (*read)(struct mii_bus *bus, int phy_id, int regnum);
	int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val);
	int (*reset)(struct mii_bus *bus);

A
Andy Fleming 已提交
160 161 162 163
	/*
	 * A lock to ensure that only one thing can read/write
	 * the MDIO bus at a time
	 */
164
	struct mutex mdio_lock;
165

166
	struct device *parent;
167 168 169 170 171 172 173
	enum {
		MDIOBUS_ALLOCATED = 1,
		MDIOBUS_REGISTERED,
		MDIOBUS_UNREGISTERED,
		MDIOBUS_RELEASED,
	} state;
	struct device dev;
174 175 176 177

	/* list of all PHYs on bus */
	struct phy_device *phy_map[PHY_MAX_ADDR];

178
	/* PHY addresses to be ignored when probing */
179 180
	u32 phy_mask;

A
Andy Fleming 已提交
181 182 183 184
	/*
	 * Pointer to an array of interrupts, each PHY's
	 * interrupt at the index matching its address
	 */
185 186
	int *irq;
};
187
#define to_mii_bus(d) container_of(d, struct mii_bus, dev)
188

189 190 191 192 193 194
struct mii_bus *mdiobus_alloc_size(size_t);
static inline struct mii_bus *mdiobus_alloc(void)
{
	return mdiobus_alloc_size(0);
}

195 196 197 198
int mdiobus_register(struct mii_bus *bus);
void mdiobus_unregister(struct mii_bus *bus);
void mdiobus_free(struct mii_bus *bus);
struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr);
199 200
int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum);
int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val);
201 202


203 204
#define PHY_INTERRUPT_DISABLED	0x0
#define PHY_INTERRUPT_ENABLED	0x80000000
205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286

/* PHY state machine states:
 *
 * DOWN: PHY device and driver are not ready for anything.  probe
 * should be called if and only if the PHY is in this state,
 * given that the PHY device exists.
 * - PHY driver probe function will, depending on the PHY, set
 * the state to STARTING or READY
 *
 * STARTING:  PHY device is coming up, and the ethernet driver is
 * not ready.  PHY drivers may set this in the probe function.
 * If they do, they are responsible for making sure the state is
 * eventually set to indicate whether the PHY is UP or READY,
 * depending on the state when the PHY is done starting up.
 * - PHY driver will set the state to READY
 * - start will set the state to PENDING
 *
 * READY: PHY is ready to send and receive packets, but the
 * controller is not.  By default, PHYs which do not implement
 * probe will be set to this state by phy_probe().  If the PHY
 * driver knows the PHY is ready, and the PHY state is STARTING,
 * then it sets this STATE.
 * - start will set the state to UP
 *
 * PENDING: PHY device is coming up, but the ethernet driver is
 * ready.  phy_start will set this state if the PHY state is
 * STARTING.
 * - PHY driver will set the state to UP when the PHY is ready
 *
 * UP: The PHY and attached device are ready to do work.
 * Interrupts should be started here.
 * - timer moves to AN
 *
 * AN: The PHY is currently negotiating the link state.  Link is
 * therefore down for now.  phy_timer will set this state when it
 * detects the state is UP.  config_aneg will set this state
 * whenever called with phydev->autoneg set to AUTONEG_ENABLE.
 * - If autonegotiation finishes, but there's no link, it sets
 *   the state to NOLINK.
 * - If aneg finishes with link, it sets the state to RUNNING,
 *   and calls adjust_link
 * - If autonegotiation did not finish after an arbitrary amount
 *   of time, autonegotiation should be tried again if the PHY
 *   supports "magic" autonegotiation (back to AN)
 * - If it didn't finish, and no magic_aneg, move to FORCING.
 *
 * NOLINK: PHY is up, but not currently plugged in.
 * - If the timer notes that the link comes back, we move to RUNNING
 * - config_aneg moves to AN
 * - phy_stop moves to HALTED
 *
 * FORCING: PHY is being configured with forced settings
 * - if link is up, move to RUNNING
 * - If link is down, we drop to the next highest setting, and
 *   retry (FORCING) after a timeout
 * - phy_stop moves to HALTED
 *
 * RUNNING: PHY is currently up, running, and possibly sending
 * and/or receiving packets
 * - timer will set CHANGELINK if we're polling (this ensures the
 *   link state is polled every other cycle of this state machine,
 *   which makes it every other second)
 * - irq will set CHANGELINK
 * - config_aneg will set AN
 * - phy_stop moves to HALTED
 *
 * CHANGELINK: PHY experienced a change in link state
 * - timer moves to RUNNING if link
 * - timer moves to NOLINK if the link is down
 * - phy_stop moves to HALTED
 *
 * HALTED: PHY is up, but no polling or interrupts are done. Or
 * PHY is in an error state.
 *
 * - phy_start moves to RESUMING
 *
 * RESUMING: PHY was halted, but now wants to run again.
 * - If we are forcing, or aneg is done, timer moves to RUNNING
 * - If aneg is not done, timer moves to AN
 * - phy_stop moves to HALTED
 */
enum phy_state {
287
	PHY_DOWN = 0,
288 289 290 291 292 293 294 295 296 297 298 299 300
	PHY_STARTING,
	PHY_READY,
	PHY_PENDING,
	PHY_UP,
	PHY_AN,
	PHY_RUNNING,
	PHY_NOLINK,
	PHY_FORCING,
	PHY_CHANGELINK,
	PHY_HALTED,
	PHY_RESUMING
};

301 302 303 304 305 306 307 308 309
/**
 * struct phy_c45_device_ids - 802.3-c45 Device Identifiers
 * @devices_in_package: Bit vector of devices present.
 * @device_ids: The device identifer for each present device.
 */
struct phy_c45_device_ids {
	u32 devices_in_package;
	u32 device_ids[8];
};
310

311 312 313 314 315 316
/* phy_device: An instance of a PHY
 *
 * drv: Pointer to the driver for this PHY instance
 * bus: Pointer to the bus this PHY is on
 * dev: driver model device structure for this PHY
 * phy_id: UID for this device found during discovery
317 318
 * c45_ids: 802.3-c45 Device Identifers if is_c45.
 * is_c45:  Set to true if this phy uses clause 45 addressing.
319
 * is_internal: Set to true if this phy is internal to a MAC.
320 321 322 323 324 325 326 327 328 329 330 331
 * state: state of the PHY for management purposes
 * dev_flags: Device-specific flags used by the PHY driver.
 * addr: Bus address of PHY
 * link_timeout: The number of timer firings to wait before the
 * giving up on the current attempt at acquiring a link
 * irq: IRQ number of the PHY's interrupt (-1 if none)
 * phy_timer: The timer for handling the state machine
 * phy_queue: A work_queue for the interrupt
 * attached_dev: The attached enet driver's device instance ptr
 * adjust_link: Callback for the enet controller to respond to
 * changes in the link state.
 *
332 333
 * speed, duplex, pause, supported, advertising, lp_advertising,
 * and autoneg are used like in mii_if_info
334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352
 *
 * interrupts currently only supports enabled or disabled,
 * but could be changed in the future to support enabling
 * and disabling specific interrupts
 *
 * Contains some infrastructure for polling and interrupt
 * handling, as well as handling shifts in PHY hardware state
 */
struct phy_device {
	/* Information about the PHY type */
	/* And management functions */
	struct phy_driver *drv;

	struct mii_bus *bus;

	struct device dev;

	u32 phy_id;

353 354
	struct phy_c45_device_ids c45_ids;
	bool is_c45;
355
	bool is_internal;
356
	bool has_fixups;
357

358 359 360 361
	enum phy_state state;

	u32 dev_flags;

362 363
	phy_interface_t interface;

364
	/* Bus address of the PHY (0-31) */
365 366
	int addr;

A
Andy Fleming 已提交
367 368
	/*
	 * forced speed & duplex (no autoneg)
369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385
	 * partner speed & duplex & pause (autoneg)
	 */
	int speed;
	int duplex;
	int pause;
	int asym_pause;

	/* The most recently read link state */
	int link;

	/* Enabled Interrupts */
	u32 interrupts;

	/* Union of PHY and Attached devices' supported modes */
	/* See mii.h for more info */
	u32 supported;
	u32 advertising;
386
	u32 lp_advertising;
387 388 389 390 391

	int autoneg;

	int link_timeout;

A
Andy Fleming 已提交
392 393 394 395
	/*
	 * Interrupt number for this PHY
	 * -1 means no interrupt
	 */
396 397 398 399 400 401 402 403
	int irq;

	/* private data pointer */
	/* For use by PHYs to maintain extra state */
	void *priv;

	/* Interrupt and Polling infrastructure */
	struct work_struct phy_queue;
404
	struct delayed_work state_queue;
405
	atomic_t irq_disable;
406

407
	struct mutex lock;
408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441

	struct net_device *attached_dev;

	void (*adjust_link)(struct net_device *dev);
};
#define to_phy_device(d) container_of(d, struct phy_device, dev)

/* struct phy_driver: Driver structure for a particular PHY type
 *
 * phy_id: The result of reading the UID registers of this PHY
 *   type, and ANDing them with the phy_id_mask.  This driver
 *   only works for PHYs with IDs which match this field
 * name: The friendly name of this PHY type
 * phy_id_mask: Defines the important bits of the phy_id
 * features: A list of features (speed, duplex, etc) supported
 *   by this PHY
 * flags: A bitfield defining certain other features this PHY
 *   supports (like interrupts)
 *
 * The drivers must implement config_aneg and read_status.  All
 * other functions are optional. Note that none of these
 * functions should be called from interrupt time.  The goal is
 * for the bus read/write functions to be able to block when the
 * bus transaction is happening, and be freed up by an interrupt
 * (The MPC85xx has this ability, though it is not currently
 * supported in the driver).
 */
struct phy_driver {
	u32 phy_id;
	char *name;
	unsigned int phy_id_mask;
	u32 features;
	u32 flags;

A
Andy Fleming 已提交
442
	/*
443 444 445 446 447
	 * Called to issue a PHY software reset
	 */
	int (*soft_reset)(struct phy_device *phydev);

	/*
A
Andy Fleming 已提交
448 449 450
	 * Called to initialize the PHY,
	 * including after a reset
	 */
451 452
	int (*config_init)(struct phy_device *phydev);

A
Andy Fleming 已提交
453 454 455 456
	/*
	 * Called during discovery.  Used to set
	 * up device-specific structures, if any
	 */
457 458 459 460 461 462
	int (*probe)(struct phy_device *phydev);

	/* PHY Power Management */
	int (*suspend)(struct phy_device *phydev);
	int (*resume)(struct phy_device *phydev);

A
Andy Fleming 已提交
463 464
	/*
	 * Configures the advertisement and resets
465 466
	 * autonegotiation if phydev->autoneg is on,
	 * forces the speed to the current settings in phydev
A
Andy Fleming 已提交
467 468
	 * if phydev->autoneg is off
	 */
469 470
	int (*config_aneg)(struct phy_device *phydev);

471 472 473
	/* Determines the auto negotiation result */
	int (*aneg_done)(struct phy_device *phydev);

474 475 476 477 478 479 480 481 482
	/* Determines the negotiated speed and duplex */
	int (*read_status)(struct phy_device *phydev);

	/* Clears any pending interrupts */
	int (*ack_interrupt)(struct phy_device *phydev);

	/* Enables or disables interrupts */
	int (*config_intr)(struct phy_device *phydev);

483 484 485 486 487 488
	/*
	 * Checks if the PHY generated an interrupt.
	 * For multi-PHY devices with shared PHY interrupt pin
	 */
	int (*did_interrupt)(struct phy_device *phydev);

489 490 491
	/* Clears up any memory if needed */
	void (*remove)(struct phy_device *phydev);

492 493 494 495 496 497
	/* Returns true if this is a suitable driver for the given
	 * phydev.  If NULL, matching is based on phy_id and
	 * phy_id_mask.
	 */
	int (*match_phy_device)(struct phy_device *phydev);

498 499 500
	/* Handles ethtool queries for hardware time stamping. */
	int (*ts_info)(struct phy_device *phydev, struct ethtool_ts_info *ti);

501 502 503 504 505 506 507 508 509 510 511 512 513 514
	/* Handles SIOCSHWTSTAMP ioctl for hardware time stamping. */
	int  (*hwtstamp)(struct phy_device *phydev, struct ifreq *ifr);

	/*
	 * Requests a Rx timestamp for 'skb'. If the skb is accepted,
	 * the phy driver promises to deliver it using netif_rx() as
	 * soon as a timestamp becomes available. One of the
	 * PTP_CLASS_ values is passed in 'type'. The function must
	 * return true if the skb is accepted for delivery.
	 */
	bool (*rxtstamp)(struct phy_device *dev, struct sk_buff *skb, int type);

	/*
	 * Requests a Tx timestamp for 'skb'. The phy driver promises
515
	 * to deliver it using skb_complete_tx_timestamp() as soon as a
516 517 518 519 520
	 * timestamp becomes available. One of the PTP_CLASS_ values
	 * is passed in 'type'.
	 */
	void (*txtstamp)(struct phy_device *dev, struct sk_buff *skb, int type);

521 522 523 524 525 526 527 528
	/* Some devices (e.g. qnap TS-119P II) require PHY register changes to
	 * enable Wake on LAN, so set_wol is provided to be called in the
	 * ethernet driver's set_wol function. */
	int (*set_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol);

	/* See set_wol, but for checking whether Wake on LAN is enabled. */
	void (*get_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol);

529 530 531 532
	struct device_driver driver;
};
#define to_phy_driver(d) container_of(d, struct phy_driver, driver)

533 534 535 536 537 538
#define PHY_ANY_ID "MATCH ANY PHY"
#define PHY_ANY_UID 0xffffffff

/* A Structure for boards to register fixups with the PHY Lib */
struct phy_fixup {
	struct list_head list;
539
	char bus_id[20];
540 541 542 543 544
	u32 phy_uid;
	u32 phy_uid_mask;
	int (*run)(struct phy_device *phydev);
};

545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562
/**
 * phy_read_mmd - Convenience function for reading a register
 * from an MMD on a given PHY.
 * @phydev: The phy_device struct
 * @devad: The MMD to read from
 * @regnum: The register on the MMD to read
 *
 * Same rules as for phy_read();
 */
static inline int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
{
	if (!phydev->is_c45)
		return -EOPNOTSUPP;

	return mdiobus_read(phydev->bus, phydev->addr,
			    MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff));
}

563 564 565 566 567 568 569 570 571
/**
 * phy_read - Convenience function for reading a given PHY register
 * @phydev: the phy_device struct
 * @regnum: register number to read
 *
 * NOTE: MUST NOT be called from interrupt context,
 * because the bus read/write functions may wait for an interrupt
 * to conclude the operation.
 */
572
static inline int phy_read(struct phy_device *phydev, u32 regnum)
573 574 575 576 577 578 579 580 581 582 583 584 585 586
{
	return mdiobus_read(phydev->bus, phydev->addr, regnum);
}

/**
 * phy_write - Convenience function for writing a given PHY register
 * @phydev: the phy_device struct
 * @regnum: register number to write
 * @val: value to write to @regnum
 *
 * NOTE: MUST NOT be called from interrupt context,
 * because the bus read/write functions may wait for an interrupt
 * to conclude the operation.
 */
587
static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val)
588 589 590 591
{
	return mdiobus_write(phydev->bus, phydev->addr, regnum, val);
}

592 593 594 595 596 597 598 599 600 601 602 603
/**
 * phy_interrupt_is_valid - Convenience function for testing a given PHY irq
 * @phydev: the phy_device struct
 *
 * NOTE: must be kept in sync with addition/removal of PHY_POLL and
 * PHY_IGNORE_INTERRUPT
 */
static inline bool phy_interrupt_is_valid(struct phy_device *phydev)
{
	return phydev->irq != PHY_POLL && phydev->irq != PHY_IGNORE_INTERRUPT;
}

604 605 606 607 608 609 610 611 612
/**
 * phy_is_internal - Convenience function for testing if a PHY is internal
 * @phydev: the phy_device struct
 */
static inline bool phy_is_internal(struct phy_device *phydev)
{
	return phydev->is_internal;
}

613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633
/**
 * phy_write_mmd - Convenience function for writing a register
 * on an MMD on a given PHY.
 * @phydev: The phy_device struct
 * @devad: The MMD to read from
 * @regnum: The register on the MMD to read
 * @val: value to write to @regnum
 *
 * Same rules as for phy_write();
 */
static inline int phy_write_mmd(struct phy_device *phydev, int devad,
				u32 regnum, u16 val)
{
	if (!phydev->is_c45)
		return -EOPNOTSUPP;

	regnum = MII_ADDR_C45 | ((devad & 0x1f) << 16) | (regnum & 0xffff);

	return mdiobus_write(phydev->bus, phydev->addr, regnum, val);
}

634
struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
635 636
				     bool is_c45,
				     struct phy_c45_device_ids *c45_ids);
637
struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45);
638
int phy_device_register(struct phy_device *phy);
639
int phy_init_hw(struct phy_device *phydev);
640 641
int phy_suspend(struct phy_device *phydev);
int phy_resume(struct phy_device *phydev);
642 643
struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
			      phy_interface_t interface);
J
Jiri Pirko 已提交
644
struct phy_device *phy_find_first(struct mii_bus *bus);
645 646
int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
		      u32 flags, phy_interface_t interface);
647
int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
648 649 650 651 652
		       void (*handler)(struct net_device *),
		       phy_interface_t interface);
struct phy_device *phy_connect(struct net_device *dev, const char *bus_id,
			       void (*handler)(struct net_device *),
			       phy_interface_t interface);
A
Andy Fleming 已提交
653 654 655 656 657 658 659
void phy_disconnect(struct phy_device *phydev);
void phy_detach(struct phy_device *phydev);
void phy_start(struct phy_device *phydev);
void phy_stop(struct phy_device *phydev);
int phy_start_aneg(struct phy_device *phydev);

int phy_stop_interrupts(struct phy_device *phydev);
660

661 662
static inline int phy_read_status(struct phy_device *phydev)
{
663 664 665
	return phydev->drv->read_status(phydev);
}

666
int genphy_setup_forced(struct phy_device *phydev);
667 668
int genphy_restart_aneg(struct phy_device *phydev);
int genphy_config_aneg(struct phy_device *phydev);
669
int genphy_aneg_done(struct phy_device *phydev);
670 671
int genphy_update_link(struct phy_device *phydev);
int genphy_read_status(struct phy_device *phydev);
G
Giuseppe Cavallaro 已提交
672 673
int genphy_suspend(struct phy_device *phydev);
int genphy_resume(struct phy_device *phydev);
674
int genphy_soft_reset(struct phy_device *phydev);
675
void phy_driver_unregister(struct phy_driver *drv);
676
void phy_drivers_unregister(struct phy_driver *drv, int n);
677
int phy_driver_register(struct phy_driver *new_driver);
678
int phy_drivers_register(struct phy_driver *new_driver, int n);
679
void phy_state_machine(struct work_struct *work);
680 681
void phy_change(struct work_struct *work);
void phy_mac_interrupt(struct phy_device *phydev, int new_link);
682
void phy_start_machine(struct phy_device *phydev);
683 684 685
void phy_stop_machine(struct phy_device *phydev);
int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
686
int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd);
A
Andy Fleming 已提交
687 688
int phy_start_interrupts(struct phy_device *phydev);
void phy_print_status(struct phy_device *phydev);
689
void phy_device_free(struct phy_device *phydev);
690

691
int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
692
		       int (*run)(struct phy_device *));
693
int phy_register_fixup_for_id(const char *bus_id,
694
			      int (*run)(struct phy_device *));
695
int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
696
			       int (*run)(struct phy_device *));
697

698 699 700 701
int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable);
int phy_get_eee_err(struct phy_device *phydev);
int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data);
int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data);
702
int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol);
703 704
void phy_ethtool_get_wol(struct phy_device *phydev,
			 struct ethtool_wolinfo *wol);
705

A
Andy Fleming 已提交
706 707 708
int __init mdio_bus_init(void);
void mdio_bus_exit(void);

709 710
extern struct bus_type mdio_bus_type;
#endif /* __PHY_H */