lpfc_init.c

/*******************************************************************
 * This file is part of the Emulex Linux Device Driver for         *
 * Fibre Channel Host Bus Adapters.                                *
 * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
 * EMULEX and SLI are trademarks of Emulex.                        *
 * www.emulex.com                                                  *
 * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
 *                                                                 *
 * This program is free software; you can redistribute it and/or   *
 * modify it under the terms of version 2 of the GNU General       *
 * Public License as published by the Free Software Foundation.    *
 * This program is distributed in the hope that it will be useful. *
 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
 * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
 * more details, a copy of which can be found in the file COPYING  *
 * included with this package.                                     *
 *******************************************************************/

#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/idr.h>
#include <linux/interrupt.h>
#include <linux/kthread.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/ctype.h>

#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>

#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
#include "lpfc.h"
#include "lpfc_logmsg.h"
#include "lpfc_crtn.h"
#include "lpfc_vport.h"
#include "lpfc_version.h"

char *_dump_buf_data;
unsigned long _dump_buf_data_order;
char *_dump_buf_dif;
unsigned long _dump_buf_dif_order;
spinlock_t _dump_buf_lock;

static void lpfc_get_hba_model_desc(struct lpfc_hba *, uint8_t *, uint8_t *);
static int lpfc_post_rcv_buf(struct lpfc_hba *);
static int lpfc_sli4_queue_create(struct lpfc_hba *);
static void lpfc_sli4_queue_destroy(struct lpfc_hba *);
static int lpfc_create_bootstrap_mbox(struct lpfc_hba *);
static int lpfc_setup_endian_order(struct lpfc_hba *);
static int lpfc_sli4_read_config(struct lpfc_hba *);
static void lpfc_destroy_bootstrap_mbox(struct lpfc_hba *);
static void lpfc_free_sgl_list(struct lpfc_hba *);
static int lpfc_init_sgl_list(struct lpfc_hba *);
static int lpfc_init_active_sgl_array(struct lpfc_hba *);
static void lpfc_free_active_sgl(struct lpfc_hba *);
static int lpfc_hba_down_post_s3(struct lpfc_hba *phba);
static int lpfc_hba_down_post_s4(struct lpfc_hba *phba);
static int lpfc_sli4_cq_event_pool_create(struct lpfc_hba *);
static void lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *);
static void lpfc_sli4_cq_event_release_all(struct lpfc_hba *);

static struct scsi_transport_template *lpfc_transport_template = NULL;
static struct scsi_transport_template *lpfc_vport_transport_template = NULL;
static DEFINE_IDR(lpfc_hba_index);

/**
 * lpfc_config_port_prep - Perform lpfc initialization prior to config port
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine will do LPFC initialization prior to issuing the CONFIG_PORT
 * mailbox command. It retrieves the revision information from the HBA and
 * collects the Vital Product Data (VPD) about the HBA for preparing the
 * configuration of the HBA.
 *
 * Return codes:
 *   0 - success.
 *   -ERESTART - requests the SLI layer to reset the HBA and try again.
 *   Any other value - indicates an error.
 **/
int
lpfc_config_port_prep(struct lpfc_hba *phba)
{
	lpfc_vpd_t *vp = &phba->vpd;
	int i = 0, rc;
	LPFC_MBOXQ_t *pmb;
	MAILBOX_t *mb;
	char *lpfc_vpd_data = NULL;
	uint16_t offset = 0;
	static char licensed[56] =
		    "key unlock for use with gnu public licensed code only\0";
	static int init_key = 1;

	pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
	if (!pmb) {
		phba->link_state = LPFC_HBA_ERROR;
		return -ENOMEM;
	}

	mb = &pmb->u.mb;
	phba->link_state = LPFC_INIT_MBX_CMDS;

	if (lpfc_is_LC_HBA(phba->pcidev->device)) {
		if (init_key) {
			uint32_t *ptext = (uint32_t *) licensed;

			for (i = 0; i < 56; i += sizeof (uint32_t), ptext++)
				*ptext = cpu_to_be32(*ptext);
			init_key = 0;
		}

		lpfc_read_nv(phba, pmb);
		memset((char*)mb->un.varRDnvp.rsvd3, 0,
			sizeof (mb->un.varRDnvp.rsvd3));
		memcpy((char*)mb->un.varRDnvp.rsvd3, licensed,
			 sizeof (licensed));

		rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);

		if (rc != MBX_SUCCESS) {
			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
					"0324 Config Port initialization "
					"error, mbxCmd x%x READ_NVPARM, "
					"mbxStatus x%x\n",
					mb->mbxCommand, mb->mbxStatus);
			mempool_free(pmb, phba->mbox_mem_pool);
			return -ERESTART;
		}
		memcpy(phba->wwnn, (char *)mb->un.varRDnvp.nodename,
		       sizeof(phba->wwnn));
		memcpy(phba->wwpn, (char *)mb->un.varRDnvp.portname,
		       sizeof(phba->wwpn));
	}

	phba->sli3_options = 0x0;

	/* Setup and issue mailbox READ REV command */
	lpfc_read_rev(phba, pmb);
	rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
	if (rc != MBX_SUCCESS) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0439 Adapter failed to init, mbxCmd x%x "
				"READ_REV, mbxStatus x%x\n",
				mb->mbxCommand, mb->mbxStatus);
		mempool_free( pmb, phba->mbox_mem_pool);
		return -ERESTART;
	}


	/*
	 * The value of rr must be 1 since the driver set the cv field to 1.
	 * This setting requires the FW to set all revision fields.
	 */
	if (mb->un.varRdRev.rr == 0) {
		vp->rev.rBit = 0;
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0440 Adapter failed to init, READ_REV has "
				"missing revision information.\n");
		mempool_free(pmb, phba->mbox_mem_pool);
		return -ERESTART;
	}

	if (phba->sli_rev == 3 && !mb->un.varRdRev.v3rsp) {
		mempool_free(pmb, phba->mbox_mem_pool);
		return -EINVAL;
	}

	/* Save information as VPD data */
	vp->rev.rBit = 1;
	memcpy(&vp->sli3Feat, &mb->un.varRdRev.sli3Feat, sizeof(uint32_t));
	vp->rev.sli1FwRev = mb->un.varRdRev.sli1FwRev;
	memcpy(vp->rev.sli1FwName, (char*) mb->un.varRdRev.sli1FwName, 16);
	vp->rev.sli2FwRev = mb->un.varRdRev.sli2FwRev;
	memcpy(vp->rev.sli2FwName, (char *) mb->un.varRdRev.sli2FwName, 16);
	vp->rev.biuRev = mb->un.varRdRev.biuRev;
	vp->rev.smRev = mb->un.varRdRev.smRev;
	vp->rev.smFwRev = mb->un.varRdRev.un.smFwRev;
	vp->rev.endecRev = mb->un.varRdRev.endecRev;
	vp->rev.fcphHigh = mb->un.varRdRev.fcphHigh;
	vp->rev.fcphLow = mb->un.varRdRev.fcphLow;
	vp->rev.feaLevelHigh = mb->un.varRdRev.feaLevelHigh;
	vp->rev.feaLevelLow = mb->un.varRdRev.feaLevelLow;
	vp->rev.postKernRev = mb->un.varRdRev.postKernRev;
	vp->rev.opFwRev = mb->un.varRdRev.opFwRev;

	/* If the sli feature level is less then 9, we must
	 * tear down all RPIs and VPIs on link down if NPIV
	 * is enabled.
	 */
	if (vp->rev.feaLevelHigh < 9)
		phba->sli3_options |= LPFC_SLI3_VPORT_TEARDOWN;

	if (lpfc_is_LC_HBA(phba->pcidev->device))
		memcpy(phba->RandomData, (char *)&mb->un.varWords[24],
						sizeof (phba->RandomData));

	/* Get adapter VPD information */
	lpfc_vpd_data = kmalloc(DMP_VPD_SIZE, GFP_KERNEL);
	if (!lpfc_vpd_data)
		goto out_free_mbox;

	do {
		lpfc_dump_mem(phba, pmb, offset);
		rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);

		if (rc != MBX_SUCCESS) {
			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
					"0441 VPD not present on adapter, "
					"mbxCmd x%x DUMP VPD, mbxStatus x%x\n",
					mb->mbxCommand, mb->mbxStatus);
			mb->un.varDmp.word_cnt = 0;
		}
		/* dump mem may return a zero when finished or we got a
		 * mailbox error, either way we are done.
		 */
		if (mb->un.varDmp.word_cnt == 0)
			break;
		if (mb->un.varDmp.word_cnt > DMP_VPD_SIZE - offset)
			mb->un.varDmp.word_cnt = DMP_VPD_SIZE - offset;
		lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET,
				      lpfc_vpd_data + offset,
				      mb->un.varDmp.word_cnt);
		offset += mb->un.varDmp.word_cnt;
	} while (mb->un.varDmp.word_cnt && offset < DMP_VPD_SIZE);
	lpfc_parse_vpd(phba, lpfc_vpd_data, offset);

	kfree(lpfc_vpd_data);
out_free_mbox:
	mempool_free(pmb, phba->mbox_mem_pool);
	return 0;
}

/**
 * lpfc_config_async_cmpl - Completion handler for config async event mbox cmd
 * @phba: pointer to lpfc hba data structure.
 * @pmboxq: pointer to the driver internal queue element for mailbox command.
 *
 * This is the completion handler for driver's configuring asynchronous event
 * mailbox command to the device. If the mailbox command returns successfully,
 * it will set internal async event support flag to 1; otherwise, it will
 * set internal async event support flag to 0.
 **/
static void
lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
{
	if (pmboxq->u.mb.mbxStatus == MBX_SUCCESS)
		phba->temp_sensor_support = 1;
	else
		phba->temp_sensor_support = 0;
	mempool_free(pmboxq, phba->mbox_mem_pool);
	return;
}

/**
 * lpfc_dump_wakeup_param_cmpl - dump memory mailbox command completion handler
 * @phba: pointer to lpfc hba data structure.
 * @pmboxq: pointer to the driver internal queue element for mailbox command.
 *
 * This is the completion handler for dump mailbox command for getting
 * wake up parameters. When this command complete, the response contain
 * Option rom version of the HBA. This function translate the version number
 * into a human readable string and store it in OptionROMVersion.
 **/
static void
lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
{
	struct prog_id *prg;
	uint32_t prog_id_word;
	char dist = ' ';
	/* character array used for decoding dist type. */
	char dist_char[] = "nabx";

	if (pmboxq->u.mb.mbxStatus != MBX_SUCCESS) {
		mempool_free(pmboxq, phba->mbox_mem_pool);
		return;
	}

	prg = (struct prog_id *) &prog_id_word;

	/* word 7 contain option rom version */
	prog_id_word = pmboxq->u.mb.un.varWords[7];

	/* Decode the Option rom version word to a readable string */
	if (prg->dist < 4)
		dist = dist_char[prg->dist];

	if ((prg->dist == 3) && (prg->num == 0))
		sprintf(phba->OptionROMVersion, "%d.%d%d",
			prg->ver, prg->rev, prg->lev);
	else
		sprintf(phba->OptionROMVersion, "%d.%d%d%c%d",
			prg->ver, prg->rev, prg->lev,
			dist, prg->num);
	mempool_free(pmboxq, phba->mbox_mem_pool);
	return;
}

/**
 * lpfc_config_port_post - Perform lpfc initialization after config port
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine will do LPFC initialization after the CONFIG_PORT mailbox
 * command call. It performs all internal resource and state setups on the
 * port: post IOCB buffers, enable appropriate host interrupt attentions,
 * ELS ring timers, etc.
 *
 * Return codes
 *   0 - success.
 *   Any other value - error.
 **/
int
lpfc_config_port_post(struct lpfc_hba *phba)
{
	struct lpfc_vport *vport = phba->pport;
	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
	LPFC_MBOXQ_t *pmb;
	MAILBOX_t *mb;
	struct lpfc_dmabuf *mp;
	struct lpfc_sli *psli = &phba->sli;
	uint32_t status, timeout;
	int i, j;
	int rc;

	spin_lock_irq(&phba->hbalock);
	/*
	 * If the Config port completed correctly the HBA is not
	 * over heated any more.
	 */
	if (phba->over_temp_state == HBA_OVER_TEMP)
		phba->over_temp_state = HBA_NORMAL_TEMP;
	spin_unlock_irq(&phba->hbalock);

	pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
	if (!pmb) {
		phba->link_state = LPFC_HBA_ERROR;
		return -ENOMEM;
	}
	mb = &pmb->u.mb;

	/* Get login parameters for NID.  */
	lpfc_read_sparam(phba, pmb, 0);
	pmb->vport = vport;
	if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0448 Adapter failed init, mbxCmd x%x "
				"READ_SPARM mbxStatus x%x\n",
				mb->mbxCommand, mb->mbxStatus);
		phba->link_state = LPFC_HBA_ERROR;
		mp = (struct lpfc_dmabuf *) pmb->context1;
		mempool_free( pmb, phba->mbox_mem_pool);
		lpfc_mbuf_free(phba, mp->virt, mp->phys);
		kfree(mp);
		return -EIO;
	}

	mp = (struct lpfc_dmabuf *) pmb->context1;

	memcpy(&vport->fc_sparam, mp->virt, sizeof (struct serv_parm));
	lpfc_mbuf_free(phba, mp->virt, mp->phys);
	kfree(mp);
	pmb->context1 = NULL;

	if (phba->cfg_soft_wwnn)
		u64_to_wwn(phba->cfg_soft_wwnn,
			   vport->fc_sparam.nodeName.u.wwn);
	if (phba->cfg_soft_wwpn)
		u64_to_wwn(phba->cfg_soft_wwpn,
			   vport->fc_sparam.portName.u.wwn);
	memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName,
	       sizeof (struct lpfc_name));
	memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
	       sizeof (struct lpfc_name));

	/* Update the fc_host data structures with new wwn. */
	fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
	fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
	fc_host_max_npiv_vports(shost) = phba->max_vpi;

	/* If no serial number in VPD data, use low 6 bytes of WWNN */
	/* This should be consolidated into parse_vpd ? - mr */
	if (phba->SerialNumber[0] == 0) {
		uint8_t *outptr;

		outptr = &vport->fc_nodename.u.s.IEEE[0];
		for (i = 0; i < 12; i++) {
			status = *outptr++;
			j = ((status & 0xf0) >> 4);
			if (j <= 9)
				phba->SerialNumber[i] =
				    (char)((uint8_t) 0x30 + (uint8_t) j);
			else
				phba->SerialNumber[i] =
				    (char)((uint8_t) 0x61 + (uint8_t) (j - 10));
			i++;
			j = (status & 0xf);
			if (j <= 9)
				phba->SerialNumber[i] =
				    (char)((uint8_t) 0x30 + (uint8_t) j);
			else
				phba->SerialNumber[i] =
				    (char)((uint8_t) 0x61 + (uint8_t) (j - 10));
		}
	}

	lpfc_read_config(phba, pmb);
	pmb->vport = vport;
	if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0453 Adapter failed to init, mbxCmd x%x "
				"READ_CONFIG, mbxStatus x%x\n",
				mb->mbxCommand, mb->mbxStatus);
		phba->link_state = LPFC_HBA_ERROR;
		mempool_free( pmb, phba->mbox_mem_pool);
		return -EIO;
	}

	/* Reset the DFT_HBA_Q_DEPTH to the max xri  */
	if (phba->cfg_hba_queue_depth > (mb->un.varRdConfig.max_xri+1))
		phba->cfg_hba_queue_depth =
			(mb->un.varRdConfig.max_xri + 1) -
					lpfc_sli4_get_els_iocb_cnt(phba);

	phba->lmt = mb->un.varRdConfig.lmt;

	/* Get the default values for Model Name and Description */
	lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);

	if ((phba->cfg_link_speed > LINK_SPEED_10G)
	    || ((phba->cfg_link_speed == LINK_SPEED_1G)
		&& !(phba->lmt & LMT_1Gb))
	    || ((phba->cfg_link_speed == LINK_SPEED_2G)
		&& !(phba->lmt & LMT_2Gb))
	    || ((phba->cfg_link_speed == LINK_SPEED_4G)
		&& !(phba->lmt & LMT_4Gb))
	    || ((phba->cfg_link_speed == LINK_SPEED_8G)
		&& !(phba->lmt & LMT_8Gb))
	    || ((phba->cfg_link_speed == LINK_SPEED_10G)
		&& !(phba->lmt & LMT_10Gb))) {
		/* Reset link speed to auto */
		lpfc_printf_log(phba, KERN_WARNING, LOG_LINK_EVENT,
			"1302 Invalid speed for this board: "
			"Reset link speed to auto: x%x\n",
			phba->cfg_link_speed);
			phba->cfg_link_speed = LINK_SPEED_AUTO;
	}

	phba->link_state = LPFC_LINK_DOWN;

	/* Only process IOCBs on ELS ring till hba_state is READY */
	if (psli->ring[psli->extra_ring].cmdringaddr)
		psli->ring[psli->extra_ring].flag |= LPFC_STOP_IOCB_EVENT;
	if (psli->ring[psli->fcp_ring].cmdringaddr)
		psli->ring[psli->fcp_ring].flag |= LPFC_STOP_IOCB_EVENT;
	if (psli->ring[psli->next_ring].cmdringaddr)
		psli->ring[psli->next_ring].flag |= LPFC_STOP_IOCB_EVENT;

	/* Post receive buffers for desired rings */
	if (phba->sli_rev != 3)
		lpfc_post_rcv_buf(phba);

	/*
	 * Configure HBA MSI-X attention conditions to messages if MSI-X mode
	 */
	if (phba->intr_type == MSIX) {
		rc = lpfc_config_msi(phba, pmb);
		if (rc) {
			mempool_free(pmb, phba->mbox_mem_pool);
			return -EIO;
		}
		rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
		if (rc != MBX_SUCCESS) {
			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
					"0352 Config MSI mailbox command "
					"failed, mbxCmd x%x, mbxStatus x%x\n",
					pmb->u.mb.mbxCommand,
					pmb->u.mb.mbxStatus);
			mempool_free(pmb, phba->mbox_mem_pool);
			return -EIO;
		}
	}

	spin_lock_irq(&phba->hbalock);
	/* Initialize ERATT handling flag */
	phba->hba_flag &= ~HBA_ERATT_HANDLED;

	/* Enable appropriate host interrupts */
	status = readl(phba->HCregaddr);
	status |= HC_MBINT_ENA | HC_ERINT_ENA | HC_LAINT_ENA;
	if (psli->num_rings > 0)
		status |= HC_R0INT_ENA;
	if (psli->num_rings > 1)
		status |= HC_R1INT_ENA;
	if (psli->num_rings > 2)
		status |= HC_R2INT_ENA;
	if (psli->num_rings > 3)
		status |= HC_R3INT_ENA;

	if ((phba->cfg_poll & ENABLE_FCP_RING_POLLING) &&
	    (phba->cfg_poll & DISABLE_FCP_RING_INT))
		status &= ~(HC_R0INT_ENA);

	writel(status, phba->HCregaddr);
	readl(phba->HCregaddr); /* flush */
	spin_unlock_irq(&phba->hbalock);

	/* Set up ring-0 (ELS) timer */
	timeout = phba->fc_ratov * 2;
	mod_timer(&vport->els_tmofunc, jiffies + HZ * timeout);
	/* Set up heart beat (HB) timer */
	mod_timer(&phba->hb_tmofunc, jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
	phba->hb_outstanding = 0;
	phba->last_completion_time = jiffies;
	/* Set up error attention (ERATT) polling timer */
	mod_timer(&phba->eratt_poll, jiffies + HZ * LPFC_ERATT_POLL_INTERVAL);

	lpfc_init_link(phba, pmb, phba->cfg_topology, phba->cfg_link_speed);
	pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
	lpfc_set_loopback_flag(phba);
	rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
	if (rc != MBX_SUCCESS) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0454 Adapter failed to init, mbxCmd x%x "
				"INIT_LINK, mbxStatus x%x\n",
				mb->mbxCommand, mb->mbxStatus);

		/* Clear all interrupt enable conditions */
		writel(0, phba->HCregaddr);
		readl(phba->HCregaddr); /* flush */
		/* Clear all pending interrupts */
		writel(0xffffffff, phba->HAregaddr);
		readl(phba->HAregaddr); /* flush */

		phba->link_state = LPFC_HBA_ERROR;
		if (rc != MBX_BUSY)
			mempool_free(pmb, phba->mbox_mem_pool);
		return -EIO;
	}
	/* MBOX buffer will be freed in mbox compl */
	pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
	lpfc_config_async(phba, pmb, LPFC_ELS_RING);
	pmb->mbox_cmpl = lpfc_config_async_cmpl;
	pmb->vport = phba->pport;
	rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);

	if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) {
		lpfc_printf_log(phba,
				KERN_ERR,
				LOG_INIT,
				"0456 Adapter failed to issue "
				"ASYNCEVT_ENABLE mbox status x%x \n.",
				rc);
		mempool_free(pmb, phba->mbox_mem_pool);
	}

	/* Get Option rom version */
	pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
	lpfc_dump_wakeup_param(phba, pmb);
	pmb->mbox_cmpl = lpfc_dump_wakeup_param_cmpl;
	pmb->vport = phba->pport;
	rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);

	if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0435 Adapter failed "
				"to get Option ROM version status x%x\n.", rc);
		mempool_free(pmb, phba->mbox_mem_pool);
	}

	return 0;
}

/**
 * lpfc_hba_down_prep - Perform lpfc uninitialization prior to HBA reset
 * @phba: pointer to lpfc HBA data structure.
 *
 * This routine will do LPFC uninitialization before the HBA is reset when
 * bringing down the SLI Layer.
 *
 * Return codes
 *   0 - success.
 *   Any other value - error.
 **/
int
lpfc_hba_down_prep(struct lpfc_hba *phba)
{
	struct lpfc_vport **vports;
	int i;

	if (phba->sli_rev <= LPFC_SLI_REV3) {
		/* Disable interrupts */
		writel(0, phba->HCregaddr);
		readl(phba->HCregaddr); /* flush */
	}

	if (phba->pport->load_flag & FC_UNLOADING)
		lpfc_cleanup_discovery_resources(phba->pport);
	else {
		vports = lpfc_create_vport_work_array(phba);
		if (vports != NULL)
			for (i = 0; i <= phba->max_vports &&
				vports[i] != NULL; i++)
				lpfc_cleanup_discovery_resources(vports[i]);
		lpfc_destroy_vport_work_array(phba, vports);
	}
	return 0;
}

/**
 * lpfc_hba_down_post_s3 - Perform lpfc uninitialization after HBA reset
 * @phba: pointer to lpfc HBA data structure.
 *
 * This routine will do uninitialization after the HBA is reset when bring
 * down the SLI Layer.
 *
 * Return codes
 *   0 - sucess.
 *   Any other value - error.
 **/
static int
lpfc_hba_down_post_s3(struct lpfc_hba *phba)
{
	struct lpfc_sli *psli = &phba->sli;
	struct lpfc_sli_ring *pring;
	struct lpfc_dmabuf *mp, *next_mp;
	LIST_HEAD(completions);
	int i;

	if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED)
		lpfc_sli_hbqbuf_free_all(phba);
	else {
		/* Cleanup preposted buffers on the ELS ring */
		pring = &psli->ring[LPFC_ELS_RING];
		list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) {
			list_del(&mp->list);
			pring->postbufq_cnt--;
			lpfc_mbuf_free(phba, mp->virt, mp->phys);
			kfree(mp);
		}
	}

	spin_lock_irq(&phba->hbalock);
	for (i = 0; i < psli->num_rings; i++) {
		pring = &psli->ring[i];

		/* At this point in time the HBA is either reset or DOA. Either
		 * way, nothing should be on txcmplq as it will NEVER complete.
		 */
		list_splice_init(&pring->txcmplq, &completions);
		pring->txcmplq_cnt = 0;
		spin_unlock_irq(&phba->hbalock);

		/* Cancel all the IOCBs from the completions list */
		lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
				      IOERR_SLI_ABORTED);

		lpfc_sli_abort_iocb_ring(phba, pring);
		spin_lock_irq(&phba->hbalock);
	}
	spin_unlock_irq(&phba->hbalock);

	return 0;
}
/**
 * lpfc_hba_down_post_s4 - Perform lpfc uninitialization after HBA reset
 * @phba: pointer to lpfc HBA data structure.
 *
 * This routine will do uninitialization after the HBA is reset when bring
 * down the SLI Layer.
 *
 * Return codes
 *   0 - sucess.
 *   Any other value - error.
 **/
static int
lpfc_hba_down_post_s4(struct lpfc_hba *phba)
{
	struct lpfc_scsi_buf *psb, *psb_next;
	LIST_HEAD(aborts);
	int ret;
	unsigned long iflag = 0;
	ret = lpfc_hba_down_post_s3(phba);
	if (ret)
		return ret;
	/* At this point in time the HBA is either reset or DOA. Either
	 * way, nothing should be on lpfc_abts_els_sgl_list, it needs to be
	 * on the lpfc_sgl_list so that it can either be freed if the
	 * driver is unloading or reposted if the driver is restarting
	 * the port.
	 */
	spin_lock_irq(&phba->hbalock);  /* required for lpfc_sgl_list and */
					/* scsl_buf_list */
	/* abts_sgl_list_lock required because worker thread uses this
	 * list.
	 */
	spin_lock(&phba->sli4_hba.abts_sgl_list_lock);
	list_splice_init(&phba->sli4_hba.lpfc_abts_els_sgl_list,
			&phba->sli4_hba.lpfc_sgl_list);
	spin_unlock(&phba->sli4_hba.abts_sgl_list_lock);
	/* abts_scsi_buf_list_lock required because worker thread uses this
	 * list.
	 */
	spin_lock(&phba->sli4_hba.abts_scsi_buf_list_lock);
	list_splice_init(&phba->sli4_hba.lpfc_abts_scsi_buf_list,
			&aborts);
	spin_unlock(&phba->sli4_hba.abts_scsi_buf_list_lock);
	spin_unlock_irq(&phba->hbalock);

	list_for_each_entry_safe(psb, psb_next, &aborts, list) {
		psb->pCmd = NULL;
		psb->status = IOSTAT_SUCCESS;
	}
	spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
	list_splice(&aborts, &phba->lpfc_scsi_buf_list);
	spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
	return 0;
}

/**
 * lpfc_hba_down_post - Wrapper func for hba down post routine
 * @phba: pointer to lpfc HBA data structure.
 *
 * This routine wraps the actual SLI3 or SLI4 routine for performing
 * uninitialization after the HBA is reset when bring down the SLI Layer.
 *
 * Return codes
 *   0 - sucess.
 *   Any other value - error.
 **/
int
lpfc_hba_down_post(struct lpfc_hba *phba)
{
	return (*phba->lpfc_hba_down_post)(phba);
}

/**
 * lpfc_hb_timeout - The HBA-timer timeout handler
 * @ptr: unsigned long holds the pointer to lpfc hba data structure.
 *
 * This is the HBA-timer timeout handler registered to the lpfc driver. When
 * this timer fires, a HBA timeout event shall be posted to the lpfc driver
 * work-port-events bitmap and the worker thread is notified. This timeout
 * event will be used by the worker thread to invoke the actual timeout
 * handler routine, lpfc_hb_timeout_handler. Any periodical operations will
 * be performed in the timeout handler and the HBA timeout event bit shall
 * be cleared by the worker thread after it has taken the event bitmap out.
 **/
static void
lpfc_hb_timeout(unsigned long ptr)
{
	struct lpfc_hba *phba;
	uint32_t tmo_posted;
	unsigned long iflag;

	phba = (struct lpfc_hba *)ptr;

	/* Check for heart beat timeout conditions */
	spin_lock_irqsave(&phba->pport->work_port_lock, iflag);
	tmo_posted = phba->pport->work_port_events & WORKER_HB_TMO;
	if (!tmo_posted)
		phba->pport->work_port_events |= WORKER_HB_TMO;
	spin_unlock_irqrestore(&phba->pport->work_port_lock, iflag);

	/* Tell the worker thread there is work to do */
	if (!tmo_posted)
		lpfc_worker_wake_up(phba);
	return;
}

/**
 * lpfc_hb_mbox_cmpl - The lpfc heart-beat mailbox command callback function
 * @phba: pointer to lpfc hba data structure.
 * @pmboxq: pointer to the driver internal queue element for mailbox command.
 *
 * This is the callback function to the lpfc heart-beat mailbox command.
 * If configured, the lpfc driver issues the heart-beat mailbox command to
 * the HBA every LPFC_HB_MBOX_INTERVAL (current 5) seconds. At the time the
 * heart-beat mailbox command is issued, the driver shall set up heart-beat
 * timeout timer to LPFC_HB_MBOX_TIMEOUT (current 30) seconds and marks
 * heart-beat outstanding state. Once the mailbox command comes back and
 * no error conditions detected, the heart-beat mailbox command timer is
 * reset to LPFC_HB_MBOX_INTERVAL seconds and the heart-beat outstanding
 * state is cleared for the next heart-beat. If the timer expired with the
 * heart-beat outstanding state set, the driver will put the HBA offline.
 **/
static void
lpfc_hb_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
{
	unsigned long drvr_flag;

	spin_lock_irqsave(&phba->hbalock, drvr_flag);
	phba->hb_outstanding = 0;
	spin_unlock_irqrestore(&phba->hbalock, drvr_flag);

	/* Check and reset heart-beat timer is necessary */
	mempool_free(pmboxq, phba->mbox_mem_pool);
	if (!(phba->pport->fc_flag & FC_OFFLINE_MODE) &&
		!(phba->link_state == LPFC_HBA_ERROR) &&
		!(phba->pport->load_flag & FC_UNLOADING))
		mod_timer(&phba->hb_tmofunc,
			jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
	return;
}

/**
 * lpfc_hb_timeout_handler - The HBA-timer timeout handler
 * @phba: pointer to lpfc hba data structure.
 *
 * This is the actual HBA-timer timeout handler to be invoked by the worker
 * thread whenever the HBA timer fired and HBA-timeout event posted. This
 * handler performs any periodic operations needed for the device. If such
 * periodic event has already been attended to either in the interrupt handler
 * or by processing slow-ring or fast-ring events within the HBA-timer
 * timeout window (LPFC_HB_MBOX_INTERVAL), this handler just simply resets
 * the timer for the next timeout period. If lpfc heart-beat mailbox command
 * is configured and there is no heart-beat mailbox command outstanding, a
 * heart-beat mailbox is issued and timer set properly. Otherwise, if there
 * has been a heart-beat mailbox command outstanding, the HBA shall be put
 * to offline.
 **/
void
lpfc_hb_timeout_handler(struct lpfc_hba *phba)
{
	LPFC_MBOXQ_t *pmboxq;
	struct lpfc_dmabuf *buf_ptr;
	int retval;
	struct lpfc_sli *psli = &phba->sli;
	LIST_HEAD(completions);

	if ((phba->link_state == LPFC_HBA_ERROR) ||
		(phba->pport->load_flag & FC_UNLOADING) ||
		(phba->pport->fc_flag & FC_OFFLINE_MODE))
		return;

	spin_lock_irq(&phba->pport->work_port_lock);

	if (time_after(phba->last_completion_time + LPFC_HB_MBOX_INTERVAL * HZ,
		jiffies)) {
		spin_unlock_irq(&phba->pport->work_port_lock);
		if (!phba->hb_outstanding)
			mod_timer(&phba->hb_tmofunc,
				jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
		else
			mod_timer(&phba->hb_tmofunc,
				jiffies + HZ * LPFC_HB_MBOX_TIMEOUT);
		return;
	}
	spin_unlock_irq(&phba->pport->work_port_lock);

	if (phba->elsbuf_cnt &&
		(phba->elsbuf_cnt == phba->elsbuf_prev_cnt)) {
		spin_lock_irq(&phba->hbalock);
		list_splice_init(&phba->elsbuf, &completions);
		phba->elsbuf_cnt = 0;
		phba->elsbuf_prev_cnt = 0;
		spin_unlock_irq(&phba->hbalock);

		while (!list_empty(&completions)) {
			list_remove_head(&completions, buf_ptr,
				struct lpfc_dmabuf, list);
			lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys);
			kfree(buf_ptr);
		}
	}
	phba->elsbuf_prev_cnt = phba->elsbuf_cnt;

	/* If there is no heart beat outstanding, issue a heartbeat command */
	if (phba->cfg_enable_hba_heartbeat) {
		if (!phba->hb_outstanding) {
			pmboxq = mempool_alloc(phba->mbox_mem_pool,GFP_KERNEL);
			if (!pmboxq) {
				mod_timer(&phba->hb_tmofunc,
					  jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
				return;
			}

			lpfc_heart_beat(phba, pmboxq);
			pmboxq->mbox_cmpl = lpfc_hb_mbox_cmpl;
			pmboxq->vport = phba->pport;
			retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);

			if (retval != MBX_BUSY && retval != MBX_SUCCESS) {
				mempool_free(pmboxq, phba->mbox_mem_pool);
				mod_timer(&phba->hb_tmofunc,
					  jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
				return;
			}
			mod_timer(&phba->hb_tmofunc,
				  jiffies + HZ * LPFC_HB_MBOX_TIMEOUT);
			phba->hb_outstanding = 1;
			return;
		} else {
			/*
			* If heart beat timeout called with hb_outstanding set
			* we need to take the HBA offline.
			*/
			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
					"0459 Adapter heartbeat failure, "
					"taking this port offline.\n");

			spin_lock_irq(&phba->hbalock);
			psli->sli_flag &= ~LPFC_SLI_ACTIVE;
			spin_unlock_irq(&phba->hbalock);

			lpfc_offline_prep(phba);
			lpfc_offline(phba);
			lpfc_unblock_mgmt_io(phba);
			phba->link_state = LPFC_HBA_ERROR;
			lpfc_hba_down_post(phba);
		}
	}
}

/**
 * lpfc_offline_eratt - Bring lpfc offline on hardware error attention
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is called to bring the HBA offline when HBA hardware error
 * other than Port Error 6 has been detected.
 **/
static void
lpfc_offline_eratt(struct lpfc_hba *phba)
{
	struct lpfc_sli   *psli = &phba->sli;

	spin_lock_irq(&phba->hbalock);
	psli->sli_flag &= ~LPFC_SLI_ACTIVE;
	spin_unlock_irq(&phba->hbalock);
	lpfc_offline_prep(phba);

	lpfc_offline(phba);
	lpfc_reset_barrier(phba);
	spin_lock_irq(&phba->hbalock);
	lpfc_sli_brdreset(phba);
	spin_unlock_irq(&phba->hbalock);
	lpfc_hba_down_post(phba);
	lpfc_sli_brdready(phba, HS_MBRDY);
	lpfc_unblock_mgmt_io(phba);
	phba->link_state = LPFC_HBA_ERROR;
	return;
}

/**
 * lpfc_sli4_offline_eratt - Bring lpfc offline on SLI4 hardware error attention
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is called to bring a SLI4 HBA offline when HBA hardware error
 * other than Port Error 6 has been detected.
 **/
static void
lpfc_sli4_offline_eratt(struct lpfc_hba *phba)
{
	lpfc_offline_prep(phba);
	lpfc_offline(phba);
	lpfc_sli4_brdreset(phba);
	lpfc_hba_down_post(phba);
	lpfc_sli4_post_status_check(phba);
	lpfc_unblock_mgmt_io(phba);
	phba->link_state = LPFC_HBA_ERROR;
}

/**
 * lpfc_handle_deferred_eratt - The HBA hardware deferred error handler
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to handle the deferred HBA hardware error
 * conditions. This type of error is indicated by HBA by setting ER1
 * and another ER bit in the host status register. The driver will
 * wait until the ER1 bit clears before handling the error condition.
 **/
static void
lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
{
	uint32_t old_host_status = phba->work_hs;
	struct lpfc_sli_ring  *pring;
	struct lpfc_sli *psli = &phba->sli;

	/* If the pci channel is offline, ignore possible errors,
	 * since we cannot communicate with the pci card anyway.
	 */
	if (pci_channel_offline(phba->pcidev)) {
		spin_lock_irq(&phba->hbalock);
		phba->hba_flag &= ~DEFER_ERATT;
		spin_unlock_irq(&phba->hbalock);
		return;
	}

	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
		"0479 Deferred Adapter Hardware Error "
		"Data: x%x x%x x%x\n",
		phba->work_hs,
		phba->work_status[0], phba->work_status[1]);

	spin_lock_irq(&phba->hbalock);
	psli->sli_flag &= ~LPFC_SLI_ACTIVE;
	spin_unlock_irq(&phba->hbalock);


	/*
	 * Firmware stops when it triggred erratt. That could cause the I/Os
	 * dropped by the firmware. Error iocb (I/O) on txcmplq and let the
	 * SCSI layer retry it after re-establishing link.
	 */
	pring = &psli->ring[psli->fcp_ring];
	lpfc_sli_abort_iocb_ring(phba, pring);

	/*
	 * There was a firmware error. Take the hba offline and then
	 * attempt to restart it.
	 */
	lpfc_offline_prep(phba);
	lpfc_offline(phba);

	/* Wait for the ER1 bit to clear.*/
	while (phba->work_hs & HS_FFER1) {
		msleep(100);
		phba->work_hs = readl(phba->HSregaddr);
		/* If driver is unloading let the worker thread continue */
		if (phba->pport->load_flag & FC_UNLOADING) {
			phba->work_hs = 0;
			break;
		}
	}

	/*
	 * This is to ptrotect against a race condition in which
	 * first write to the host attention register clear the
	 * host status register.
	 */
	if ((!phba->work_hs) && (!(phba->pport->load_flag & FC_UNLOADING)))
		phba->work_hs = old_host_status & ~HS_FFER1;

	spin_lock_irq(&phba->hbalock);
	phba->hba_flag &= ~DEFER_ERATT;
	spin_unlock_irq(&phba->hbalock);
	phba->work_status[0] = readl(phba->MBslimaddr + 0xa8);
	phba->work_status[1] = readl(phba->MBslimaddr + 0xac);
}

static void
lpfc_board_errevt_to_mgmt(struct lpfc_hba *phba)
{
	struct lpfc_board_event_header board_event;
	struct Scsi_Host *shost;

	board_event.event_type = FC_REG_BOARD_EVENT;
	board_event.subcategory = LPFC_EVENT_PORTINTERR;
	shost = lpfc_shost_from_vport(phba->pport);
	fc_host_post_vendor_event(shost, fc_get_event_number(),
				  sizeof(board_event),
				  (char *) &board_event,
				  LPFC_NL_VENDOR_ID);
}

/**
 * lpfc_handle_eratt_s3 - The SLI3 HBA hardware error handler
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to handle the following HBA hardware error
 * conditions:
 * 1 - HBA error attention interrupt
 * 2 - DMA ring index out of range
 * 3 - Mailbox command came back as unknown
 **/
static void
lpfc_handle_eratt_s3(struct lpfc_hba *phba)
{
	struct lpfc_vport *vport = phba->pport;
	struct lpfc_sli   *psli = &phba->sli;
	struct lpfc_sli_ring  *pring;
	uint32_t event_data;
	unsigned long temperature;
	struct temp_event temp_event_data;
	struct Scsi_Host  *shost;

	/* If the pci channel is offline, ignore possible errors,
	 * since we cannot communicate with the pci card anyway.
	 */
	if (pci_channel_offline(phba->pcidev)) {
		spin_lock_irq(&phba->hbalock);
		phba->hba_flag &= ~DEFER_ERATT;
		spin_unlock_irq(&phba->hbalock);
		return;
	}

	/* If resets are disabled then leave the HBA alone and return */
	if (!phba->cfg_enable_hba_reset)
		return;

	/* Send an internal error event to mgmt application */
	lpfc_board_errevt_to_mgmt(phba);

	if (phba->hba_flag & DEFER_ERATT)
		lpfc_handle_deferred_eratt(phba);

	if (phba->work_hs & HS_FFER6) {
		/* Re-establishing Link */
		lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT,
				"1301 Re-establishing Link "
				"Data: x%x x%x x%x\n",
				phba->work_hs,
				phba->work_status[0], phba->work_status[1]);

		spin_lock_irq(&phba->hbalock);
		psli->sli_flag &= ~LPFC_SLI_ACTIVE;
		spin_unlock_irq(&phba->hbalock);

		/*
		* Firmware stops when it triggled erratt with HS_FFER6.
		* That could cause the I/Os dropped by the firmware.
		* Error iocb (I/O) on txcmplq and let the SCSI layer
		* retry it after re-establishing link.
		*/
		pring = &psli->ring[psli->fcp_ring];
		lpfc_sli_abort_iocb_ring(phba, pring);

		/*
		 * There was a firmware error.  Take the hba offline and then
		 * attempt to restart it.
		 */
		lpfc_offline_prep(phba);
		lpfc_offline(phba);
		lpfc_sli_brdrestart(phba);
		if (lpfc_online(phba) == 0) {	/* Initialize the HBA */
			lpfc_unblock_mgmt_io(phba);
			return;
		}
		lpfc_unblock_mgmt_io(phba);
	} else if (phba->work_hs & HS_CRIT_TEMP) {
		temperature = readl(phba->MBslimaddr + TEMPERATURE_OFFSET);
		temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT;
		temp_event_data.event_code = LPFC_CRIT_TEMP;
		temp_event_data.data = (uint32_t)temperature;

		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0406 Adapter maximum temperature exceeded "
				"(%ld), taking this port offline "
				"Data: x%x x%x x%x\n",
				temperature, phba->work_hs,
				phba->work_status[0], phba->work_status[1]);

		shost = lpfc_shost_from_vport(phba->pport);
		fc_host_post_vendor_event(shost, fc_get_event_number(),
					  sizeof(temp_event_data),
					  (char *) &temp_event_data,
					  SCSI_NL_VID_TYPE_PCI
					  | PCI_VENDOR_ID_EMULEX);

		spin_lock_irq(&phba->hbalock);
		phba->over_temp_state = HBA_OVER_TEMP;
		spin_unlock_irq(&phba->hbalock);
		lpfc_offline_eratt(phba);

	} else {
		/* The if clause above forces this code path when the status
		 * failure is a value other than FFER6. Do not call the offline
		 * twice. This is the adapter hardware error path.
		 */
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0457 Adapter Hardware Error "
				"Data: x%x x%x x%x\n",
				phba->work_hs,
				phba->work_status[0], phba->work_status[1]);

		event_data = FC_REG_DUMP_EVENT;
		shost = lpfc_shost_from_vport(vport);
		fc_host_post_vendor_event(shost, fc_get_event_number(),
				sizeof(event_data), (char *) &event_data,
				SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX);

		lpfc_offline_eratt(phba);
	}
	return;
}

/**
 * lpfc_handle_eratt_s4 - The SLI4 HBA hardware error handler
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to handle the SLI4 HBA hardware error attention
 * conditions.
 **/
static void
lpfc_handle_eratt_s4(struct lpfc_hba *phba)
{
	struct lpfc_vport *vport = phba->pport;
	uint32_t event_data;
	struct Scsi_Host *shost;

	/* If the pci channel is offline, ignore possible errors, since
	 * we cannot communicate with the pci card anyway.
	 */
	if (pci_channel_offline(phba->pcidev))
		return;
	/* If resets are disabled then leave the HBA alone and return */
	if (!phba->cfg_enable_hba_reset)
		return;

	/* Send an internal error event to mgmt application */
	lpfc_board_errevt_to_mgmt(phba);

	/* For now, the actual action for SLI4 device handling is not
	 * specified yet, just treated it as adaptor hardware failure
	 */
	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
			"0143 SLI4 Adapter Hardware Error Data: x%x x%x\n",
			phba->work_status[0], phba->work_status[1]);

	event_data = FC_REG_DUMP_EVENT;
	shost = lpfc_shost_from_vport(vport);
	fc_host_post_vendor_event(shost, fc_get_event_number(),
				  sizeof(event_data), (char *) &event_data,
				  SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX);

	lpfc_sli4_offline_eratt(phba);
}

/**
 * lpfc_handle_eratt - Wrapper func for handling hba error attention
 * @phba: pointer to lpfc HBA data structure.
 *
 * This routine wraps the actual SLI3 or SLI4 hba error attention handling
 * routine from the API jump table function pointer from the lpfc_hba struct.
 *
 * Return codes
 *   0 - sucess.
 *   Any other value - error.
 **/
void
lpfc_handle_eratt(struct lpfc_hba *phba)
{
	(*phba->lpfc_handle_eratt)(phba);
}

/**
 * lpfc_handle_latt - The HBA link event handler
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked from the worker thread to handle a HBA host
 * attention link event.
 **/
void
lpfc_handle_latt(struct lpfc_hba *phba)
{
	struct lpfc_vport *vport = phba->pport;
	struct lpfc_sli   *psli = &phba->sli;
	LPFC_MBOXQ_t *pmb;
	volatile uint32_t control;
	struct lpfc_dmabuf *mp;
	int rc = 0;

	pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
	if (!pmb) {
		rc = 1;
		goto lpfc_handle_latt_err_exit;
	}

	mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
	if (!mp) {
		rc = 2;
		goto lpfc_handle_latt_free_pmb;
	}

	mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
	if (!mp->virt) {
		rc = 3;
		goto lpfc_handle_latt_free_mp;
	}

	/* Cleanup any outstanding ELS commands */
	lpfc_els_flush_all_cmd(phba);

	psli->slistat.link_event++;
	lpfc_read_la(phba, pmb, mp);
	pmb->mbox_cmpl = lpfc_mbx_cmpl_read_la;
	pmb->vport = vport;
	/* Block ELS IOCBs until we have processed this mbox command */
	phba->sli.ring[LPFC_ELS_RING].flag |= LPFC_STOP_IOCB_EVENT;
	rc = lpfc_sli_issue_mbox (phba, pmb, MBX_NOWAIT);
	if (rc == MBX_NOT_FINISHED) {
		rc = 4;
		goto lpfc_handle_latt_free_mbuf;
	}

	/* Clear Link Attention in HA REG */
	spin_lock_irq(&phba->hbalock);
	writel(HA_LATT, phba->HAregaddr);
	readl(phba->HAregaddr); /* flush */
	spin_unlock_irq(&phba->hbalock);

	return;

lpfc_handle_latt_free_mbuf:
	phba->sli.ring[LPFC_ELS_RING].flag &= ~LPFC_STOP_IOCB_EVENT;
	lpfc_mbuf_free(phba, mp->virt, mp->phys);
lpfc_handle_latt_free_mp:
	kfree(mp);
lpfc_handle_latt_free_pmb:
	mempool_free(pmb, phba->mbox_mem_pool);
lpfc_handle_latt_err_exit:
	/* Enable Link attention interrupts */
	spin_lock_irq(&phba->hbalock);
	psli->sli_flag |= LPFC_PROCESS_LA;
	control = readl(phba->HCregaddr);
	control |= HC_LAINT_ENA;
	writel(control, phba->HCregaddr);
	readl(phba->HCregaddr); /* flush */

	/* Clear Link Attention in HA REG */
	writel(HA_LATT, phba->HAregaddr);
	readl(phba->HAregaddr); /* flush */
	spin_unlock_irq(&phba->hbalock);
	lpfc_linkdown(phba);
	phba->link_state = LPFC_HBA_ERROR;

	lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
		     "0300 LATT: Cannot issue READ_LA: Data:%d\n", rc);

	return;
}

/**
 * lpfc_parse_vpd - Parse VPD (Vital Product Data)
 * @phba: pointer to lpfc hba data structure.
 * @vpd: pointer to the vital product data.
 * @len: length of the vital product data in bytes.
 *
 * This routine parses the Vital Product Data (VPD). The VPD is treated as
 * an array of characters. In this routine, the ModelName, ProgramType, and
 * ModelDesc, etc. fields of the phba data structure will be populated.
 *
 * Return codes
 *   0 - pointer to the VPD passed in is NULL
 *   1 - success
 **/
int
lpfc_parse_vpd(struct lpfc_hba *phba, uint8_t *vpd, int len)
{
	uint8_t lenlo, lenhi;
	int Length;
	int i, j;
	int finished = 0;
	int index = 0;

	if (!vpd)
		return 0;

	/* Vital Product */
	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
			"0455 Vital Product Data: x%x x%x x%x x%x\n",
			(uint32_t) vpd[0], (uint32_t) vpd[1], (uint32_t) vpd[2],
			(uint32_t) vpd[3]);
	while (!finished && (index < (len - 4))) {
		switch (vpd[index]) {
		case 0x82:
		case 0x91:
			index += 1;
			lenlo = vpd[index];
			index += 1;
			lenhi = vpd[index];
			index += 1;
			i = ((((unsigned short)lenhi) << 8) + lenlo);
			index += i;
			break;
		case 0x90:
			index += 1;
			lenlo = vpd[index];
			index += 1;
			lenhi = vpd[index];
			index += 1;
			Length = ((((unsigned short)lenhi) << 8) + lenlo);
			if (Length > len - index)
				Length = len - index;
			while (Length > 0) {
			/* Look for Serial Number */
			if ((vpd[index] == 'S') && (vpd[index+1] == 'N')) {
				index += 2;
				i = vpd[index];
				index += 1;
				j = 0;
				Length -= (3+i);
				while(i--) {
					phba->SerialNumber[j++] = vpd[index++];
					if (j == 31)
						break;
				}
				phba->SerialNumber[j] = 0;
				continue;
			}
			else if ((vpd[index] == 'V') && (vpd[index+1] == '1')) {
				phba->vpd_flag |= VPD_MODEL_DESC;
				index += 2;
				i = vpd[index];
				index += 1;
				j = 0;
				Length -= (3+i);
				while(i--) {
					phba->ModelDesc[j++] = vpd[index++];
					if (j == 255)
						break;
				}
				phba->ModelDesc[j] = 0;
				continue;
			}
			else if ((vpd[index] == 'V') && (vpd[index+1] == '2')) {
				phba->vpd_flag |= VPD_MODEL_NAME;
				index += 2;
				i = vpd[index];
				index += 1;
				j = 0;
				Length -= (3+i);
				while(i--) {
					phba->ModelName[j++] = vpd[index++];
					if (j == 79)
						break;
				}
				phba->ModelName[j] = 0;
				continue;
			}
			else if ((vpd[index] == 'V') && (vpd[index+1] == '3')) {
				phba->vpd_flag |= VPD_PROGRAM_TYPE;
				index += 2;
				i = vpd[index];
				index += 1;
				j = 0;
				Length -= (3+i);
				while(i--) {
					phba->ProgramType[j++] = vpd[index++];
					if (j == 255)
						break;
				}
				phba->ProgramType[j] = 0;
				continue;
			}
			else if ((vpd[index] == 'V') && (vpd[index+1] == '4')) {
				phba->vpd_flag |= VPD_PORT;
				index += 2;
				i = vpd[index];
				index += 1;
				j = 0;
				Length -= (3+i);
				while(i--) {
				phba->Port[j++] = vpd[index++];
				if (j == 19)
					break;
				}
				phba->Port[j] = 0;
				continue;
			}
			else {
				index += 2;
				i = vpd[index];
				index += 1;
				index += i;
				Length -= (3 + i);
			}
		}
		finished = 0;
		break;
		case 0x78:
			finished = 1;
			break;
		default:
			index ++;
			break;
		}
	}

	return(1);
}

/**
 * lpfc_get_hba_model_desc - Retrieve HBA device model name and description
 * @phba: pointer to lpfc hba data structure.
 * @mdp: pointer to the data structure to hold the derived model name.
 * @descp: pointer to the data structure to hold the derived description.
 *
 * This routine retrieves HBA's description based on its registered PCI device
 * ID. The @descp passed into this function points to an array of 256 chars. It
 * shall be returned with the model name, maximum speed, and the host bus type.
 * The @mdp passed into this function points to an array of 80 chars. When the
 * function returns, the @mdp will be filled with the model name.
 **/
static void
lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
{
	lpfc_vpd_t *vp;
	uint16_t dev_id = phba->pcidev->device;
	int max_speed;
	int GE = 0;
	int oneConnect = 0; /* default is not a oneConnect */
	struct {
		char * name;
		int    max_speed;
		char * bus;
	} m = {"<Unknown>", 0, ""};

	if (mdp && mdp[0] != '\0'
		&& descp && descp[0] != '\0')
		return;

	if (phba->lmt & LMT_10Gb)
		max_speed = 10;
	else if (phba->lmt & LMT_8Gb)
		max_speed = 8;
	else if (phba->lmt & LMT_4Gb)
		max_speed = 4;
	else if (phba->lmt & LMT_2Gb)
		max_speed = 2;
	else
		max_speed = 1;

	vp = &phba->vpd;

	switch (dev_id) {
	case PCI_DEVICE_ID_FIREFLY:
		m = (typeof(m)){"LP6000", max_speed, "PCI"};
		break;
	case PCI_DEVICE_ID_SUPERFLY:
		if (vp->rev.biuRev >= 1 && vp->rev.biuRev <= 3)
			m = (typeof(m)){"LP7000", max_speed,  "PCI"};
		else
			m = (typeof(m)){"LP7000E", max_speed, "PCI"};
		break;
	case PCI_DEVICE_ID_DRAGONFLY:
		m = (typeof(m)){"LP8000", max_speed, "PCI"};
		break;
	case PCI_DEVICE_ID_CENTAUR:
		if (FC_JEDEC_ID(vp->rev.biuRev) == CENTAUR_2G_JEDEC_ID)
			m = (typeof(m)){"LP9002", max_speed, "PCI"};
		else
			m = (typeof(m)){"LP9000", max_speed, "PCI"};
		break;
	case PCI_DEVICE_ID_RFLY:
		m = (typeof(m)){"LP952", max_speed, "PCI"};
		break;
	case PCI_DEVICE_ID_PEGASUS:
		m = (typeof(m)){"LP9802", max_speed, "PCI-X"};
		break;
	case PCI_DEVICE_ID_THOR:
		m = (typeof(m)){"LP10000", max_speed, "PCI-X"};
		break;
	case PCI_DEVICE_ID_VIPER:
		m = (typeof(m)){"LPX1000", max_speed,  "PCI-X"};
		break;
	case PCI_DEVICE_ID_PFLY:
		m = (typeof(m)){"LP982", max_speed, "PCI-X"};
		break;
	case PCI_DEVICE_ID_TFLY:
		m = (typeof(m)){"LP1050", max_speed, "PCI-X"};
		break;
	case PCI_DEVICE_ID_HELIOS:
		m = (typeof(m)){"LP11000", max_speed, "PCI-X2"};
		break;
	case PCI_DEVICE_ID_HELIOS_SCSP:
		m = (typeof(m)){"LP11000-SP", max_speed, "PCI-X2"};
		break;
	case PCI_DEVICE_ID_HELIOS_DCSP:
		m = (typeof(m)){"LP11002-SP", max_speed, "PCI-X2"};
		break;
	case PCI_DEVICE_ID_NEPTUNE:
		m = (typeof(m)){"LPe1000", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_NEPTUNE_SCSP:
		m = (typeof(m)){"LPe1000-SP", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_NEPTUNE_DCSP:
		m = (typeof(m)){"LPe1002-SP", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_BMID:
		m = (typeof(m)){"LP1150", max_speed, "PCI-X2"};
		break;
	case PCI_DEVICE_ID_BSMB:
		m = (typeof(m)){"LP111", max_speed, "PCI-X2"};
		break;
	case PCI_DEVICE_ID_ZEPHYR:
		m = (typeof(m)){"LPe11000", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_ZEPHYR_SCSP:
		m = (typeof(m)){"LPe11000", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_ZEPHYR_DCSP:
		m = (typeof(m)){"LP2105", max_speed, "PCIe"};
		GE = 1;
		break;
	case PCI_DEVICE_ID_ZMID:
		m = (typeof(m)){"LPe1150", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_ZSMB:
		m = (typeof(m)){"LPe111", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_LP101:
		m = (typeof(m)){"LP101", max_speed, "PCI-X"};
		break;
	case PCI_DEVICE_ID_LP10000S:
		m = (typeof(m)){"LP10000-S", max_speed, "PCI"};
		break;
	case PCI_DEVICE_ID_LP11000S:
		m = (typeof(m)){"LP11000-S", max_speed,
			"PCI-X2"};
		break;
	case PCI_DEVICE_ID_LPE11000S:
		m = (typeof(m)){"LPe11000-S", max_speed,
			"PCIe"};
		break;
	case PCI_DEVICE_ID_SAT:
		m = (typeof(m)){"LPe12000", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_SAT_MID:
		m = (typeof(m)){"LPe1250", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_SAT_SMB:
		m = (typeof(m)){"LPe121", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_SAT_DCSP:
		m = (typeof(m)){"LPe12002-SP", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_SAT_SCSP:
		m = (typeof(m)){"LPe12000-SP", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_SAT_S:
		m = (typeof(m)){"LPe12000-S", max_speed, "PCIe"};
		break;
	case PCI_DEVICE_ID_HORNET:
		m = (typeof(m)){"LP21000", max_speed, "PCIe"};
		GE = 1;
		break;
	case PCI_DEVICE_ID_PROTEUS_VF:
		m = (typeof(m)) {"LPev12000", max_speed, "PCIe IOV"};
		break;
	case PCI_DEVICE_ID_PROTEUS_PF:
		m = (typeof(m)) {"LPev12000", max_speed, "PCIe IOV"};
		break;
	case PCI_DEVICE_ID_PROTEUS_S:
		m = (typeof(m)) {"LPemv12002-S", max_speed, "PCIe IOV"};
		break;
	case PCI_DEVICE_ID_TIGERSHARK:
		oneConnect = 1;
		m = (typeof(m)) {"OCe10100-F", max_speed, "PCIe"};
		break;
	default:
		m = (typeof(m)){ NULL };
		break;
	}

	if (mdp && mdp[0] == '\0')
		snprintf(mdp, 79,"%s", m.name);
	/* oneConnect hba requires special processing, they are all initiators
	 * and we put the port number on the end
	 */
	if (descp && descp[0] == '\0') {
		if (oneConnect)
			snprintf(descp, 255,
				"Emulex OneConnect %s, FCoE Initiator, Port %s",
				m.name,
				phba->Port);
		else
			snprintf(descp, 255,
				"Emulex %s %d%s %s %s",
				m.name, m.max_speed,
				(GE) ? "GE" : "Gb",
				m.bus,
				(GE) ? "FCoE Adapter" :
					"Fibre Channel Adapter");
	}
}

/**
 * lpfc_post_buffer - Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring
 * @phba: pointer to lpfc hba data structure.
 * @pring: pointer to a IOCB ring.
 * @cnt: the number of IOCBs to be posted to the IOCB ring.
 *
 * This routine posts a given number of IOCBs with the associated DMA buffer
 * descriptors specified by the cnt argument to the given IOCB ring.
 *
 * Return codes
 *   The number of IOCBs NOT able to be posted to the IOCB ring.
 **/
int
lpfc_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt)
{
	IOCB_t *icmd;
	struct lpfc_iocbq *iocb;
	struct lpfc_dmabuf *mp1, *mp2;

	cnt += pring->missbufcnt;

	/* While there are buffers to post */
	while (cnt > 0) {
		/* Allocate buffer for  command iocb */
		iocb = lpfc_sli_get_iocbq(phba);
		if (iocb == NULL) {
			pring->missbufcnt = cnt;
			return cnt;
		}
		icmd = &iocb->iocb;

		/* 2 buffers can be posted per command */
		/* Allocate buffer to post */
		mp1 = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL);
		if (mp1)
		    mp1->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &mp1->phys);
		if (!mp1 || !mp1->virt) {
			kfree(mp1);
			lpfc_sli_release_iocbq(phba, iocb);
			pring->missbufcnt = cnt;
			return cnt;
		}

		INIT_LIST_HEAD(&mp1->list);
		/* Allocate buffer to post */
		if (cnt > 1) {
			mp2 = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL);
			if (mp2)
				mp2->virt = lpfc_mbuf_alloc(phba, MEM_PRI,
							    &mp2->phys);
			if (!mp2 || !mp2->virt) {
				kfree(mp2);
				lpfc_mbuf_free(phba, mp1->virt, mp1->phys);
				kfree(mp1);
				lpfc_sli_release_iocbq(phba, iocb);
				pring->missbufcnt = cnt;
				return cnt;
			}

			INIT_LIST_HEAD(&mp2->list);
		} else {
			mp2 = NULL;
		}

		icmd->un.cont64[0].addrHigh = putPaddrHigh(mp1->phys);
		icmd->un.cont64[0].addrLow = putPaddrLow(mp1->phys);
		icmd->un.cont64[0].tus.f.bdeSize = FCELSSIZE;
		icmd->ulpBdeCount = 1;
		cnt--;
		if (mp2) {
			icmd->un.cont64[1].addrHigh = putPaddrHigh(mp2->phys);
			icmd->un.cont64[1].addrLow = putPaddrLow(mp2->phys);
			icmd->un.cont64[1].tus.f.bdeSize = FCELSSIZE;
			cnt--;
			icmd->ulpBdeCount = 2;
		}

		icmd->ulpCommand = CMD_QUE_RING_BUF64_CN;
		icmd->ulpLe = 1;

		if (lpfc_sli_issue_iocb(phba, pring->ringno, iocb, 0) ==
		    IOCB_ERROR) {
			lpfc_mbuf_free(phba, mp1->virt, mp1->phys);
			kfree(mp1);
			cnt++;
			if (mp2) {
				lpfc_mbuf_free(phba, mp2->virt, mp2->phys);
				kfree(mp2);
				cnt++;
			}
			lpfc_sli_release_iocbq(phba, iocb);
			pring->missbufcnt = cnt;
			return cnt;
		}
		lpfc_sli_ringpostbuf_put(phba, pring, mp1);
		if (mp2)
			lpfc_sli_ringpostbuf_put(phba, pring, mp2);
	}
	pring->missbufcnt = 0;
	return 0;
}

/**
 * lpfc_post_rcv_buf - Post the initial receive IOCB buffers to ELS ring
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine posts initial receive IOCB buffers to the ELS ring. The
 * current number of initial IOCB buffers specified by LPFC_BUF_RING0 is
 * set to 64 IOCBs.
 *
 * Return codes
 *   0 - success (currently always success)
 **/
static int
lpfc_post_rcv_buf(struct lpfc_hba *phba)
{
	struct lpfc_sli *psli = &phba->sli;

	/* Ring 0, ELS / CT buffers */
	lpfc_post_buffer(phba, &psli->ring[LPFC_ELS_RING], LPFC_BUF_RING0);
	/* Ring 2 - FCP no buffers needed */

	return 0;
}

#define S(N,V) (((V)<<(N))|((V)>>(32-(N))))

/**
 * lpfc_sha_init - Set up initial array of hash table entries
 * @HashResultPointer: pointer to an array as hash table.
 *
 * This routine sets up the initial values to the array of hash table entries
 * for the LC HBAs.
 **/
static void
lpfc_sha_init(uint32_t * HashResultPointer)
{
	HashResultPointer[0] = 0x67452301;
	HashResultPointer[1] = 0xEFCDAB89;
	HashResultPointer[2] = 0x98BADCFE;
	HashResultPointer[3] = 0x10325476;
	HashResultPointer[4] = 0xC3D2E1F0;
}

/**
 * lpfc_sha_iterate - Iterate initial hash table with the working hash table
 * @HashResultPointer: pointer to an initial/result hash table.
 * @HashWorkingPointer: pointer to an working hash table.
 *
 * This routine iterates an initial hash table pointed by @HashResultPointer
 * with the values from the working hash table pointeed by @HashWorkingPointer.
 * The results are putting back to the initial hash table, returned through
 * the @HashResultPointer as the result hash table.
 **/
static void
lpfc_sha_iterate(uint32_t * HashResultPointer, uint32_t * HashWorkingPointer)
{
	int t;
	uint32_t TEMP;
	uint32_t A, B, C, D, E;
	t = 16;
	do {
		HashWorkingPointer[t] =
		    S(1,
		      HashWorkingPointer[t - 3] ^ HashWorkingPointer[t -
								     8] ^
		      HashWorkingPointer[t - 14] ^ HashWorkingPointer[t - 16]);
	} while (++t <= 79);
	t = 0;
	A = HashResultPointer[0];
	B = HashResultPointer[1];
	C = HashResultPointer[2];
	D = HashResultPointer[3];
	E = HashResultPointer[4];

	do {
		if (t < 20) {
			TEMP = ((B & C) | ((~B) & D)) + 0x5A827999;
		} else if (t < 40) {
			TEMP = (B ^ C ^ D) + 0x6ED9EBA1;
		} else if (t < 60) {
			TEMP = ((B & C) | (B & D) | (C & D)) + 0x8F1BBCDC;
		} else {
			TEMP = (B ^ C ^ D) + 0xCA62C1D6;
		}
		TEMP += S(5, A) + E + HashWorkingPointer[t];
		E = D;
		D = C;
		C = S(30, B);
		B = A;
		A = TEMP;
	} while (++t <= 79);

	HashResultPointer[0] += A;
	HashResultPointer[1] += B;
	HashResultPointer[2] += C;
	HashResultPointer[3] += D;
	HashResultPointer[4] += E;

}

/**
 * lpfc_challenge_key - Create challenge key based on WWPN of the HBA
 * @RandomChallenge: pointer to the entry of host challenge random number array.
 * @HashWorking: pointer to the entry of the working hash array.
 *
 * This routine calculates the working hash array referred by @HashWorking
 * from the challenge random numbers associated with the host, referred by
 * @RandomChallenge. The result is put into the entry of the working hash
 * array and returned by reference through @HashWorking.
 **/
static void
lpfc_challenge_key(uint32_t * RandomChallenge, uint32_t * HashWorking)
{
	*HashWorking = (*RandomChallenge ^ *HashWorking);
}

/**
 * lpfc_hba_init - Perform special handling for LC HBA initialization
 * @phba: pointer to lpfc hba data structure.
 * @hbainit: pointer to an array of unsigned 32-bit integers.
 *
 * This routine performs the special handling for LC HBA initialization.
 **/
void
lpfc_hba_init(struct lpfc_hba *phba, uint32_t *hbainit)
{
	int t;
	uint32_t *HashWorking;
	uint32_t *pwwnn = (uint32_t *) phba->wwnn;

	HashWorking = kcalloc(80, sizeof(uint32_t), GFP_KERNEL);
	if (!HashWorking)
		return;

	HashWorking[0] = HashWorking[78] = *pwwnn++;
	HashWorking[1] = HashWorking[79] = *pwwnn;

	for (t = 0; t < 7; t++)
		lpfc_challenge_key(phba->RandomData + t, HashWorking + t);

	lpfc_sha_init(hbainit);
	lpfc_sha_iterate(hbainit, HashWorking);
	kfree(HashWorking);
}

/**
 * lpfc_cleanup - Performs vport cleanups before deleting a vport
 * @vport: pointer to a virtual N_Port data structure.
 *
 * This routine performs the necessary cleanups before deleting the @vport.
 * It invokes the discovery state machine to perform necessary state
 * transitions and to release the ndlps associated with the @vport. Note,
 * the physical port is treated as @vport 0.
 **/
void
lpfc_cleanup(struct lpfc_vport *vport)
{
	struct lpfc_hba   *phba = vport->phba;
	struct lpfc_nodelist *ndlp, *next_ndlp;
	int i = 0;

	if (phba->link_state > LPFC_LINK_DOWN)
		lpfc_port_link_failure(vport);

	list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
		if (!NLP_CHK_NODE_ACT(ndlp)) {
			ndlp = lpfc_enable_node(vport, ndlp,
						NLP_STE_UNUSED_NODE);
			if (!ndlp)
				continue;
			spin_lock_irq(&phba->ndlp_lock);
			NLP_SET_FREE_REQ(ndlp);
			spin_unlock_irq(&phba->ndlp_lock);
			/* Trigger the release of the ndlp memory */
			lpfc_nlp_put(ndlp);
			continue;
		}
		spin_lock_irq(&phba->ndlp_lock);
		if (NLP_CHK_FREE_REQ(ndlp)) {
			/* The ndlp should not be in memory free mode already */
			spin_unlock_irq(&phba->ndlp_lock);
			continue;
		} else
			/* Indicate request for freeing ndlp memory */
			NLP_SET_FREE_REQ(ndlp);
		spin_unlock_irq(&phba->ndlp_lock);

		if (vport->port_type != LPFC_PHYSICAL_PORT &&
		    ndlp->nlp_DID == Fabric_DID) {
			/* Just free up ndlp with Fabric_DID for vports */
			lpfc_nlp_put(ndlp);
			continue;
		}

		if (ndlp->nlp_type & NLP_FABRIC)
			lpfc_disc_state_machine(vport, ndlp, NULL,
					NLP_EVT_DEVICE_RECOVERY);

		lpfc_disc_state_machine(vport, ndlp, NULL,
					     NLP_EVT_DEVICE_RM);

	}

	/* At this point, ALL ndlp's should be gone
	 * because of the previous NLP_EVT_DEVICE_RM.
	 * Lets wait for this to happen, if needed.
	 */
	while (!list_empty(&vport->fc_nodes)) {
		if (i++ > 3000) {
			lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
				"0233 Nodelist not empty\n");
			list_for_each_entry_safe(ndlp, next_ndlp,
						&vport->fc_nodes, nlp_listp) {
				lpfc_printf_vlog(ndlp->vport, KERN_ERR,
						LOG_NODE,
						"0282 did:x%x ndlp:x%p "
						"usgmap:x%x refcnt:%d\n",
						ndlp->nlp_DID, (void *)ndlp,
						ndlp->nlp_usg_map,
						atomic_read(
							&ndlp->kref.refcount));
			}
			break;
		}

		/* Wait for any activity on ndlps to settle */
		msleep(10);
	}
}

/**
 * lpfc_stop_vport_timers - Stop all the timers associated with a vport
 * @vport: pointer to a virtual N_Port data structure.
 *
 * This routine stops all the timers associated with a @vport. This function
 * is invoked before disabling or deleting a @vport. Note that the physical
 * port is treated as @vport 0.
 **/
void
lpfc_stop_vport_timers(struct lpfc_vport *vport)
{
	del_timer_sync(&vport->els_tmofunc);
	del_timer_sync(&vport->fc_fdmitmo);
	lpfc_can_disctmo(vport);
	return;
}

/**
 * lpfc_stop_hba_timers - Stop all the timers associated with an HBA
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine stops all the timers associated with a HBA. This function is
 * invoked before either putting a HBA offline or unloading the driver.
 **/
void
lpfc_stop_hba_timers(struct lpfc_hba *phba)
{
	lpfc_stop_vport_timers(phba->pport);
	del_timer_sync(&phba->sli.mbox_tmo);
	del_timer_sync(&phba->fabric_block_timer);
	del_timer_sync(&phba->eratt_poll);
	del_timer_sync(&phba->hb_tmofunc);
	phba->hb_outstanding = 0;

	switch (phba->pci_dev_grp) {
	case LPFC_PCI_DEV_LP:
		/* Stop any LightPulse device specific driver timers */
		del_timer_sync(&phba->fcp_poll_timer);
		break;
	case LPFC_PCI_DEV_OC:
		/* Stop any OneConnect device sepcific driver timers */
		break;
	default:
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0297 Invalid device group (x%x)\n",
				phba->pci_dev_grp);
		break;
	}
	return;
}

/**
 * lpfc_block_mgmt_io - Mark a HBA's management interface as blocked
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine marks a HBA's management interface as blocked. Once the HBA's
 * management interface is marked as blocked, all the user space access to
 * the HBA, whether they are from sysfs interface or libdfc interface will
 * all be blocked. The HBA is set to block the management interface when the
 * driver prepares the HBA interface for online or offline.
 **/
static void
lpfc_block_mgmt_io(struct lpfc_hba * phba)
{
	unsigned long iflag;

	spin_lock_irqsave(&phba->hbalock, iflag);
	phba->sli.sli_flag |= LPFC_BLOCK_MGMT_IO;
	spin_unlock_irqrestore(&phba->hbalock, iflag);
}

/**
 * lpfc_online - Initialize and bring a HBA online
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine initializes the HBA and brings a HBA online. During this
 * process, the management interface is blocked to prevent user space access
 * to the HBA interfering with the driver initialization.
 *
 * Return codes
 *   0 - successful
 *   1 - failed
 **/
int
lpfc_online(struct lpfc_hba *phba)
{
	struct lpfc_vport *vport;
	struct lpfc_vport **vports;
	int i;

	if (!phba)
		return 0;
	vport = phba->pport;

	if (!(vport->fc_flag & FC_OFFLINE_MODE))
		return 0;

	lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
			"0458 Bring Adapter online\n");

	lpfc_block_mgmt_io(phba);

	if (!lpfc_sli_queue_setup(phba)) {
		lpfc_unblock_mgmt_io(phba);
		return 1;
	}

	if (phba->sli_rev == LPFC_SLI_REV4) {
		if (lpfc_sli4_hba_setup(phba)) { /* Initialize SLI4 HBA */
			lpfc_unblock_mgmt_io(phba);
			return 1;
		}
	} else {
		if (lpfc_sli_hba_setup(phba)) {	/* Initialize SLI2/SLI3 HBA */
			lpfc_unblock_mgmt_io(phba);
			return 1;
		}
	}

	vports = lpfc_create_vport_work_array(phba);
	if (vports != NULL)
		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
			struct Scsi_Host *shost;
			shost = lpfc_shost_from_vport(vports[i]);
			spin_lock_irq(shost->host_lock);
			vports[i]->fc_flag &= ~FC_OFFLINE_MODE;
			if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
				vports[i]->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
			spin_unlock_irq(shost->host_lock);
		}
		lpfc_destroy_vport_work_array(phba, vports);

	lpfc_unblock_mgmt_io(phba);
	return 0;
}

/**
 * lpfc_unblock_mgmt_io - Mark a HBA's management interface to be not blocked
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine marks a HBA's management interface as not blocked. Once the
 * HBA's management interface is marked as not blocked, all the user space
 * access to the HBA, whether they are from sysfs interface or libdfc
 * interface will be allowed. The HBA is set to block the management interface
 * when the driver prepares the HBA interface for online or offline and then
 * set to unblock the management interface afterwards.
 **/
void
lpfc_unblock_mgmt_io(struct lpfc_hba * phba)
{
	unsigned long iflag;

	spin_lock_irqsave(&phba->hbalock, iflag);
	phba->sli.sli_flag &= ~LPFC_BLOCK_MGMT_IO;
	spin_unlock_irqrestore(&phba->hbalock, iflag);
}

/**
 * lpfc_offline_prep - Prepare a HBA to be brought offline
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to prepare a HBA to be brought offline. It performs
 * unregistration login to all the nodes on all vports and flushes the mailbox
 * queue to make it ready to be brought offline.
 **/
void
lpfc_offline_prep(struct lpfc_hba * phba)
{
	struct lpfc_vport *vport = phba->pport;
	struct lpfc_nodelist  *ndlp, *next_ndlp;
	struct lpfc_vport **vports;
	int i;

	if (vport->fc_flag & FC_OFFLINE_MODE)
		return;

	lpfc_block_mgmt_io(phba);

	lpfc_linkdown(phba);

	/* Issue an unreg_login to all nodes on all vports */
	vports = lpfc_create_vport_work_array(phba);
	if (vports != NULL) {
		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
			struct Scsi_Host *shost;

			if (vports[i]->load_flag & FC_UNLOADING)
				continue;
			vports[i]->vfi_state &= ~LPFC_VFI_REGISTERED;
			shost =	lpfc_shost_from_vport(vports[i]);
			list_for_each_entry_safe(ndlp, next_ndlp,
						 &vports[i]->fc_nodes,
						 nlp_listp) {
				if (!NLP_CHK_NODE_ACT(ndlp))
					continue;
				if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
					continue;
				if (ndlp->nlp_type & NLP_FABRIC) {
					lpfc_disc_state_machine(vports[i], ndlp,
						NULL, NLP_EVT_DEVICE_RECOVERY);
					lpfc_disc_state_machine(vports[i], ndlp,
						NULL, NLP_EVT_DEVICE_RM);
				}
				spin_lock_irq(shost->host_lock);
				ndlp->nlp_flag &= ~NLP_NPR_ADISC;
				spin_unlock_irq(shost->host_lock);
				lpfc_unreg_rpi(vports[i], ndlp);
			}
		}
	}
	lpfc_destroy_vport_work_array(phba, vports);

	lpfc_sli_mbox_sys_shutdown(phba);
}

/**
 * lpfc_offline - Bring a HBA offline
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine actually brings a HBA offline. It stops all the timers
 * associated with the HBA, brings down the SLI layer, and eventually
 * marks the HBA as in offline state for the upper layer protocol.
 **/
void
lpfc_offline(struct lpfc_hba *phba)
{
	struct Scsi_Host  *shost;
	struct lpfc_vport **vports;
	int i;

	if (phba->pport->fc_flag & FC_OFFLINE_MODE)
		return;

	/* stop port and all timers associated with this hba */
	lpfc_stop_port(phba);
	vports = lpfc_create_vport_work_array(phba);
	if (vports != NULL)
		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
			lpfc_stop_vport_timers(vports[i]);
	lpfc_destroy_vport_work_array(phba, vports);
	lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
			"0460 Bring Adapter offline\n");
	/* Bring down the SLI Layer and cleanup.  The HBA is offline
	   now.  */
	lpfc_sli_hba_down(phba);
	spin_lock_irq(&phba->hbalock);
	phba->work_ha = 0;
	spin_unlock_irq(&phba->hbalock);
	vports = lpfc_create_vport_work_array(phba);
	if (vports != NULL)
		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
			shost = lpfc_shost_from_vport(vports[i]);
			spin_lock_irq(shost->host_lock);
			vports[i]->work_port_events = 0;
			vports[i]->fc_flag |= FC_OFFLINE_MODE;
			spin_unlock_irq(shost->host_lock);
		}
	lpfc_destroy_vport_work_array(phba, vports);
}

/**
 * lpfc_scsi_free - Free all the SCSI buffers and IOCBs from driver lists
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is to free all the SCSI buffers and IOCBs from the driver
 * list back to kernel. It is called from lpfc_pci_remove_one to free
 * the internal resources before the device is removed from the system.
 *
 * Return codes
 *   0 - successful (for now, it always returns 0)
 **/
static int
lpfc_scsi_free(struct lpfc_hba *phba)
{
	struct lpfc_scsi_buf *sb, *sb_next;
	struct lpfc_iocbq *io, *io_next;

	spin_lock_irq(&phba->hbalock);
	/* Release all the lpfc_scsi_bufs maintained by this host. */
	list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list) {
		list_del(&sb->list);
		pci_pool_free(phba->lpfc_scsi_dma_buf_pool, sb->data,
			      sb->dma_handle);
		kfree(sb);
		phba->total_scsi_bufs--;
	}

	/* Release all the lpfc_iocbq entries maintained by this host. */
	list_for_each_entry_safe(io, io_next, &phba->lpfc_iocb_list, list) {
		list_del(&io->list);
		kfree(io);
		phba->total_iocbq_bufs--;
	}

	spin_unlock_irq(&phba->hbalock);

	return 0;
}

/**
 * lpfc_create_port - Create an FC port
 * @phba: pointer to lpfc hba data structure.
 * @instance: a unique integer ID to this FC port.
 * @dev: pointer to the device data structure.
 *
 * This routine creates a FC port for the upper layer protocol. The FC port
 * can be created on top of either a physical port or a virtual port provided
 * by the HBA. This routine also allocates a SCSI host data structure (shost)
 * and associates the FC port created before adding the shost into the SCSI
 * layer.
 *
 * Return codes
 *   @vport - pointer to the virtual N_Port data structure.
 *   NULL - port create failed.
 **/
struct lpfc_vport *
lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
{
	struct lpfc_vport *vport;
	struct Scsi_Host  *shost;
	int error = 0;

	if (dev != &phba->pcidev->dev)
		shost = scsi_host_alloc(&lpfc_vport_template,
					sizeof(struct lpfc_vport));
	else
		shost = scsi_host_alloc(&lpfc_template,
					sizeof(struct lpfc_vport));
	if (!shost)
		goto out;

	vport = (struct lpfc_vport *) shost->hostdata;
	vport->phba = phba;
	vport->load_flag |= FC_LOADING;
	vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
	vport->fc_rscn_flush = 0;

	lpfc_get_vport_cfgparam(vport);
	shost->unique_id = instance;
	shost->max_id = LPFC_MAX_TARGET;
	shost->max_lun = vport->cfg_max_luns;
	shost->this_id = -1;
	shost->max_cmd_len = 16;
	if (phba->sli_rev == LPFC_SLI_REV4) {
		shost->dma_boundary = LPFC_SLI4_MAX_SEGMENT_SIZE;
		shost->sg_tablesize = phba->cfg_sg_seg_cnt;
	}

	/*
	 * Set initial can_queue value since 0 is no longer supported and
	 * scsi_add_host will fail. This will be adjusted later based on the
	 * max xri value determined in hba setup.
	 */
	shost->can_queue = phba->cfg_hba_queue_depth - 10;
	if (dev != &phba->pcidev->dev) {
		shost->transportt = lpfc_vport_transport_template;
		vport->port_type = LPFC_NPIV_PORT;
	} else {
		shost->transportt = lpfc_transport_template;
		vport->port_type = LPFC_PHYSICAL_PORT;
	}

	/* Initialize all internally managed lists. */
	INIT_LIST_HEAD(&vport->fc_nodes);
	INIT_LIST_HEAD(&vport->rcv_buffer_list);
	spin_lock_init(&vport->work_port_lock);

	init_timer(&vport->fc_disctmo);
	vport->fc_disctmo.function = lpfc_disc_timeout;
	vport->fc_disctmo.data = (unsigned long)vport;

	init_timer(&vport->fc_fdmitmo);
	vport->fc_fdmitmo.function = lpfc_fdmi_tmo;
	vport->fc_fdmitmo.data = (unsigned long)vport;

	init_timer(&vport->els_tmofunc);
	vport->els_tmofunc.function = lpfc_els_timeout;
	vport->els_tmofunc.data = (unsigned long)vport;

	error = scsi_add_host(shost, dev);
	if (error)
		goto out_put_shost;

	spin_lock_irq(&phba->hbalock);
	list_add_tail(&vport->listentry, &phba->port_list);
	spin_unlock_irq(&phba->hbalock);
	return vport;

out_put_shost:
	scsi_host_put(shost);
out:
	return NULL;
}

/**
 * destroy_port -  destroy an FC port
 * @vport: pointer to an lpfc virtual N_Port data structure.
 *
 * This routine destroys a FC port from the upper layer protocol. All the
 * resources associated with the port are released.
 **/
void
destroy_port(struct lpfc_vport *vport)
{
	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
	struct lpfc_hba  *phba = vport->phba;

	lpfc_debugfs_terminate(vport);
	fc_remove_host(shost);
	scsi_remove_host(shost);

	spin_lock_irq(&phba->hbalock);
	list_del_init(&vport->listentry);
	spin_unlock_irq(&phba->hbalock);

	lpfc_cleanup(vport);
	return;
}

/**
 * lpfc_get_instance - Get a unique integer ID
 *
 * This routine allocates a unique integer ID from lpfc_hba_index pool. It
 * uses the kernel idr facility to perform the task.
 *
 * Return codes:
 *   instance - a unique integer ID allocated as the new instance.
 *   -1 - lpfc get instance failed.
 **/
int
lpfc_get_instance(void)
{
	int instance = 0;

	/* Assign an unused number */
	if (!idr_pre_get(&lpfc_hba_index, GFP_KERNEL))
		return -1;
	if (idr_get_new(&lpfc_hba_index, NULL, &instance))
		return -1;
	return instance;
}

/**
 * lpfc_scan_finished - method for SCSI layer to detect whether scan is done
 * @shost: pointer to SCSI host data structure.
 * @time: elapsed time of the scan in jiffies.
 *
 * This routine is called by the SCSI layer with a SCSI host to determine
 * whether the scan host is finished.
 *
 * Note: there is no scan_start function as adapter initialization will have
 * asynchronously kicked off the link initialization.
 *
 * Return codes
 *   0 - SCSI host scan is not over yet.
 *   1 - SCSI host scan is over.
 **/
int lpfc_scan_finished(struct Scsi_Host *shost, unsigned long time)
{
	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
	struct lpfc_hba   *phba = vport->phba;
	int stat = 0;

	spin_lock_irq(shost->host_lock);

	if (vport->load_flag & FC_UNLOADING) {
		stat = 1;
		goto finished;
	}
	if (time >= 30 * HZ) {
		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
				"0461 Scanning longer than 30 "
				"seconds.  Continuing initialization\n");
		stat = 1;
		goto finished;
	}
	if (time >= 15 * HZ && phba->link_state <= LPFC_LINK_DOWN) {
		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
				"0465 Link down longer than 15 "
				"seconds.  Continuing initialization\n");
		stat = 1;
		goto finished;
	}

	if (vport->port_state != LPFC_VPORT_READY)
		goto finished;
	if (vport->num_disc_nodes || vport->fc_prli_sent)
		goto finished;
	if (vport->fc_map_cnt == 0 && time < 2 * HZ)
		goto finished;
	if ((phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) != 0)
		goto finished;

	stat = 1;

finished:
	spin_unlock_irq(shost->host_lock);
	return stat;
}

/**
 * lpfc_host_attrib_init - Initialize SCSI host attributes on a FC port
 * @shost: pointer to SCSI host data structure.
 *
 * This routine initializes a given SCSI host attributes on a FC port. The
 * SCSI host can be either on top of a physical port or a virtual port.
 **/
void lpfc_host_attrib_init(struct Scsi_Host *shost)
{
	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
	struct lpfc_hba   *phba = vport->phba;
	/*
	 * Set fixed host attributes.  Must done after lpfc_sli_hba_setup().
	 */

	fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
	fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
	fc_host_supported_classes(shost) = FC_COS_CLASS3;

	memset(fc_host_supported_fc4s(shost), 0,
	       sizeof(fc_host_supported_fc4s(shost)));
	fc_host_supported_fc4s(shost)[2] = 1;
	fc_host_supported_fc4s(shost)[7] = 1;

	lpfc_vport_symbolic_node_name(vport, fc_host_symbolic_name(shost),
				 sizeof fc_host_symbolic_name(shost));

	fc_host_supported_speeds(shost) = 0;
	if (phba->lmt & LMT_10Gb)
		fc_host_supported_speeds(shost) |= FC_PORTSPEED_10GBIT;
	if (phba->lmt & LMT_8Gb)
		fc_host_supported_speeds(shost) |= FC_PORTSPEED_8GBIT;
	if (phba->lmt & LMT_4Gb)
		fc_host_supported_speeds(shost) |= FC_PORTSPEED_4GBIT;
	if (phba->lmt & LMT_2Gb)
		fc_host_supported_speeds(shost) |= FC_PORTSPEED_2GBIT;
	if (phba->lmt & LMT_1Gb)
		fc_host_supported_speeds(shost) |= FC_PORTSPEED_1GBIT;

	fc_host_maxframe_size(shost) =
		(((uint32_t) vport->fc_sparam.cmn.bbRcvSizeMsb & 0x0F) << 8) |
		(uint32_t) vport->fc_sparam.cmn.bbRcvSizeLsb;

	/* This value is also unchanging */
	memset(fc_host_active_fc4s(shost), 0,
	       sizeof(fc_host_active_fc4s(shost)));
	fc_host_active_fc4s(shost)[2] = 1;
	fc_host_active_fc4s(shost)[7] = 1;

	fc_host_max_npiv_vports(shost) = phba->max_vpi;
	spin_lock_irq(shost->host_lock);
	vport->load_flag &= ~FC_LOADING;
	spin_unlock_irq(shost->host_lock);
}

/**
 * lpfc_stop_port_s3 - Stop SLI3 device port
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to stop an SLI3 device port, it stops the device
 * from generating interrupts and stops the device driver's timers for the
 * device.
 **/
static void
lpfc_stop_port_s3(struct lpfc_hba *phba)
{
	/* Clear all interrupt enable conditions */
	writel(0, phba->HCregaddr);
	readl(phba->HCregaddr); /* flush */
	/* Clear all pending interrupts */
	writel(0xffffffff, phba->HAregaddr);
	readl(phba->HAregaddr); /* flush */

	/* Reset some HBA SLI setup states */
	lpfc_stop_hba_timers(phba);
	phba->pport->work_port_events = 0;
}

/**
 * lpfc_stop_port_s4 - Stop SLI4 device port
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to stop an SLI4 device port, it stops the device
 * from generating interrupts and stops the device driver's timers for the
 * device.
 **/
static void
lpfc_stop_port_s4(struct lpfc_hba *phba)
{
	/* Reset some HBA SLI4 setup states */
	lpfc_stop_hba_timers(phba);
	phba->pport->work_port_events = 0;
	phba->sli4_hba.intr_enable = 0;
	/* Hard clear it for now, shall have more graceful way to wait later */
	phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
}

/**
 * lpfc_stop_port - Wrapper function for stopping hba port
 * @phba: Pointer to HBA context object.
 *
 * This routine wraps the actual SLI3 or SLI4 hba stop port routine from
 * the API jump table function pointer from the lpfc_hba struct.
 **/
void
lpfc_stop_port(struct lpfc_hba *phba)
{
	phba->lpfc_stop_port(phba);
}

/**
 * lpfc_sli4_remove_dflt_fcf - Remove the driver default fcf record from the port.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to remove the driver default fcf record from
 * the port.  This routine currently acts on FCF Index 0.
 *
 **/
void
lpfc_sli_remove_dflt_fcf(struct lpfc_hba *phba)
{
	int rc = 0;
	LPFC_MBOXQ_t *mboxq;
	struct lpfc_mbx_del_fcf_tbl_entry *del_fcf_record;
	uint32_t mbox_tmo, req_len;
	uint32_t shdr_status, shdr_add_status;

	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
	if (!mboxq) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
			"2020 Failed to allocate mbox for ADD_FCF cmd\n");
		return;
	}

	req_len = sizeof(struct lpfc_mbx_del_fcf_tbl_entry) -
		  sizeof(struct lpfc_sli4_cfg_mhdr);
	rc = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
			      LPFC_MBOX_OPCODE_FCOE_DELETE_FCF,
			      req_len, LPFC_SLI4_MBX_EMBED);
	/*
	 * In phase 1, there is a single FCF index, 0.  In phase2, the driver
	 * supports multiple FCF indices.
	 */
	del_fcf_record = &mboxq->u.mqe.un.del_fcf_entry;
	bf_set(lpfc_mbx_del_fcf_tbl_count, del_fcf_record, 1);
	bf_set(lpfc_mbx_del_fcf_tbl_index, del_fcf_record,
	       phba->fcf.fcf_indx);

	if (!phba->sli4_hba.intr_enable)
		rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
	else {
		mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
		rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
	}
	/* The IOCTL status is embedded in the mailbox subheader. */
	shdr_status = bf_get(lpfc_mbox_hdr_status,
			     &del_fcf_record->header.cfg_shdr.response);
	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
				 &del_fcf_record->header.cfg_shdr.response);
	if (shdr_status || shdr_add_status || rc != MBX_SUCCESS) {
		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
				"2516 DEL FCF of default FCF Index failed "
				"mbx status x%x, status x%x add_status x%x\n",
				rc, shdr_status, shdr_add_status);
	}
	if (rc != MBX_TIMEOUT)
		mempool_free(mboxq, phba->mbox_mem_pool);
}

/**
 * lpfc_sli4_parse_latt_fault - Parse sli4 link-attention link fault code
 * @phba: pointer to lpfc hba data structure.
 * @acqe_link: pointer to the async link completion queue entry.
 *
 * This routine is to parse the SLI4 link-attention link fault code and
 * translate it into the base driver's read link attention mailbox command
 * status.
 *
 * Return: Link-attention status in terms of base driver's coding.
 **/
static uint16_t
lpfc_sli4_parse_latt_fault(struct lpfc_hba *phba,
			   struct lpfc_acqe_link *acqe_link)
{
	uint16_t latt_fault;

	switch (bf_get(lpfc_acqe_link_fault, acqe_link)) {
	case LPFC_ASYNC_LINK_FAULT_NONE:
	case LPFC_ASYNC_LINK_FAULT_LOCAL:
	case LPFC_ASYNC_LINK_FAULT_REMOTE:
		latt_fault = 0;
		break;
	default:
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0398 Invalid link fault code: x%x\n",
				bf_get(lpfc_acqe_link_fault, acqe_link));
		latt_fault = MBXERR_ERROR;
		break;
	}
	return latt_fault;
}

/**
 * lpfc_sli4_parse_latt_type - Parse sli4 link attention type
 * @phba: pointer to lpfc hba data structure.
 * @acqe_link: pointer to the async link completion queue entry.
 *
 * This routine is to parse the SLI4 link attention type and translate it
 * into the base driver's link attention type coding.
 *
 * Return: Link attention type in terms of base driver's coding.
 **/
static uint8_t
lpfc_sli4_parse_latt_type(struct lpfc_hba *phba,
			  struct lpfc_acqe_link *acqe_link)
{
	uint8_t att_type;

	switch (bf_get(lpfc_acqe_link_status, acqe_link)) {
	case LPFC_ASYNC_LINK_STATUS_DOWN:
	case LPFC_ASYNC_LINK_STATUS_LOGICAL_DOWN:
		att_type = AT_LINK_DOWN;
		break;
	case LPFC_ASYNC_LINK_STATUS_UP:
		/* Ignore physical link up events - wait for logical link up */
		att_type = AT_RESERVED;
		break;
	case LPFC_ASYNC_LINK_STATUS_LOGICAL_UP:
		att_type = AT_LINK_UP;
		break;
	default:
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0399 Invalid link attention type: x%x\n",
				bf_get(lpfc_acqe_link_status, acqe_link));
		att_type = AT_RESERVED;
		break;
	}
	return att_type;
}

/**
 * lpfc_sli4_parse_latt_link_speed - Parse sli4 link-attention link speed
 * @phba: pointer to lpfc hba data structure.
 * @acqe_link: pointer to the async link completion queue entry.
 *
 * This routine is to parse the SLI4 link-attention link speed and translate
 * it into the base driver's link-attention link speed coding.
 *
 * Return: Link-attention link speed in terms of base driver's coding.
 **/
static uint8_t
lpfc_sli4_parse_latt_link_speed(struct lpfc_hba *phba,
				struct lpfc_acqe_link *acqe_link)
{
	uint8_t link_speed;

	switch (bf_get(lpfc_acqe_link_speed, acqe_link)) {
	case LPFC_ASYNC_LINK_SPEED_ZERO:
		link_speed = LA_UNKNW_LINK;
		break;
	case LPFC_ASYNC_LINK_SPEED_10MBPS:
		link_speed = LA_UNKNW_LINK;
		break;
	case LPFC_ASYNC_LINK_SPEED_100MBPS:
		link_speed = LA_UNKNW_LINK;
		break;
	case LPFC_ASYNC_LINK_SPEED_1GBPS:
		link_speed = LA_1GHZ_LINK;
		break;
	case LPFC_ASYNC_LINK_SPEED_10GBPS:
		link_speed = LA_10GHZ_LINK;
		break;
	default:
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0483 Invalid link-attention link speed: x%x\n",
				bf_get(lpfc_acqe_link_speed, acqe_link));
		link_speed = LA_UNKNW_LINK;
		break;
	}
	return link_speed;
}

/**
 * lpfc_sli4_async_link_evt - Process the asynchronous link event
 * @phba: pointer to lpfc hba data structure.
 * @acqe_link: pointer to the async link completion queue entry.
 *
 * This routine is to handle the SLI4 asynchronous link event.
 **/
static void
lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
			 struct lpfc_acqe_link *acqe_link)
{
	struct lpfc_dmabuf *mp;
	LPFC_MBOXQ_t *pmb;
	MAILBOX_t *mb;
	READ_LA_VAR *la;
	uint8_t att_type;

	att_type = lpfc_sli4_parse_latt_type(phba, acqe_link);
	if (att_type != AT_LINK_DOWN && att_type != AT_LINK_UP)
		return;
	pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
	if (!pmb) {
		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
				"0395 The mboxq allocation failed\n");
		return;
	}
	mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
	if (!mp) {
		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
				"0396 The lpfc_dmabuf allocation failed\n");
		goto out_free_pmb;
	}
	mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
	if (!mp->virt) {
		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
				"0397 The mbuf allocation failed\n");
		goto out_free_dmabuf;
	}

	/* Cleanup any outstanding ELS commands */
	lpfc_els_flush_all_cmd(phba);

	/* Block ELS IOCBs until we have done process link event */
	phba->sli.ring[LPFC_ELS_RING].flag |= LPFC_STOP_IOCB_EVENT;

	/* Update link event statistics */
	phba->sli.slistat.link_event++;

	/* Create pseudo lpfc_handle_latt mailbox command from link ACQE */
	lpfc_read_la(phba, pmb, mp);
	pmb->vport = phba->pport;

	/* Parse and translate status field */
	mb = &pmb->u.mb;
	mb->mbxStatus = lpfc_sli4_parse_latt_fault(phba, acqe_link);

	/* Parse and translate link attention fields */
	la = (READ_LA_VAR *) &pmb->u.mb.un.varReadLA;
	la->eventTag = acqe_link->event_tag;
	la->attType = att_type;
	la->UlnkSpeed = lpfc_sli4_parse_latt_link_speed(phba, acqe_link);

	/* Fake the the following irrelvant fields */
	la->topology = TOPOLOGY_PT_PT;
	la->granted_AL_PA = 0;
	la->il = 0;
	la->pb = 0;
	la->fa = 0;
	la->mm = 0;

	/* Keep the link status for extra SLI4 state machine reference */
	phba->sli4_hba.link_state.speed =
				bf_get(lpfc_acqe_link_speed, acqe_link);
	phba->sli4_hba.link_state.duplex =
				bf_get(lpfc_acqe_link_duplex, acqe_link);
	phba->sli4_hba.link_state.status =
				bf_get(lpfc_acqe_link_status, acqe_link);
	phba->sli4_hba.link_state.physical =
				bf_get(lpfc_acqe_link_physical, acqe_link);
	phba->sli4_hba.link_state.fault =
				bf_get(lpfc_acqe_link_fault, acqe_link);

	/* Invoke the lpfc_handle_latt mailbox command callback function */
	lpfc_mbx_cmpl_read_la(phba, pmb);

	return;

out_free_dmabuf:
	kfree(mp);
out_free_pmb:
	mempool_free(pmb, phba->mbox_mem_pool);
}

/**
 * lpfc_sli4_async_fcoe_evt - Process the asynchronous fcoe event
 * @phba: pointer to lpfc hba data structure.
 * @acqe_link: pointer to the async fcoe completion queue entry.
 *
 * This routine is to handle the SLI4 asynchronous fcoe event.
 **/
static void
lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
			 struct lpfc_acqe_fcoe *acqe_fcoe)
{
	uint8_t event_type = bf_get(lpfc_acqe_fcoe_event_type, acqe_fcoe);
	int rc;

	switch (event_type) {
	case LPFC_FCOE_EVENT_TYPE_NEW_FCF:
		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
			"2546 New FCF found index 0x%x tag 0x%x \n",
			acqe_fcoe->fcf_index,
			acqe_fcoe->event_tag);
		/*
		 * If the current FCF is in discovered state,
		 * do nothing.
		 */
		spin_lock_irq(&phba->hbalock);
		if (phba->fcf.fcf_flag & FCF_DISCOVERED) {
			spin_unlock_irq(&phba->hbalock);
			break;
		}
		spin_unlock_irq(&phba->hbalock);

		/* Read the FCF table and re-discover SAN. */
		rc = lpfc_sli4_read_fcf_record(phba,
			LPFC_FCOE_FCF_GET_FIRST);
		if (rc)
			lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
				"2547 Read FCF record failed 0x%x\n",
				rc);
		break;

	case LPFC_FCOE_EVENT_TYPE_FCF_TABLE_FULL:
		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
			"2548 FCF Table full count 0x%x tag 0x%x \n",
			bf_get(lpfc_acqe_fcoe_fcf_count, acqe_fcoe),
			acqe_fcoe->event_tag);
		break;

	case LPFC_FCOE_EVENT_TYPE_FCF_DEAD:
		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
			"2549 FCF disconnected fron network index 0x%x"
			" tag 0x%x \n", acqe_fcoe->fcf_index,
			acqe_fcoe->event_tag);
		/* If the event is not for currently used fcf do nothing */
		if (phba->fcf.fcf_indx != acqe_fcoe->fcf_index)
			break;
		/*
		 * Currently, driver support only one FCF - so treat this as
		 * a link down.
		 */
		lpfc_linkdown(phba);
		/* Unregister FCF if no devices connected to it */
		lpfc_unregister_unused_fcf(phba);
		break;

	default:
		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
			"0288 Unknown FCoE event type 0x%x event tag "
			"0x%x\n", event_type, acqe_fcoe->event_tag);
		break;
	}
}

/**
 * lpfc_sli4_async_dcbx_evt - Process the asynchronous dcbx event
 * @phba: pointer to lpfc hba data structure.
 * @acqe_link: pointer to the async dcbx completion queue entry.
 *
 * This routine is to handle the SLI4 asynchronous dcbx event.
 **/
static void
lpfc_sli4_async_dcbx_evt(struct lpfc_hba *phba,
			 struct lpfc_acqe_dcbx *acqe_dcbx)
{
	lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
			"0290 The SLI4 DCBX asynchronous event is not "
			"handled yet\n");
}

/**
 * lpfc_sli4_async_event_proc - Process all the pending asynchronous event
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked by the worker thread to process all the pending
 * SLI4 asynchronous events.
 **/
void lpfc_sli4_async_event_proc(struct lpfc_hba *phba)
{
	struct lpfc_cq_event *cq_event;

	/* First, declare the async event has been handled */
	spin_lock_irq(&phba->hbalock);
	phba->hba_flag &= ~ASYNC_EVENT;
	spin_unlock_irq(&phba->hbalock);
	/* Now, handle all the async events */
	while (!list_empty(&phba->sli4_hba.sp_asynce_work_queue)) {
		/* Get the first event from the head of the event queue */
		spin_lock_irq(&phba->hbalock);
		list_remove_head(&phba->sli4_hba.sp_asynce_work_queue,
				 cq_event, struct lpfc_cq_event, list);
		spin_unlock_irq(&phba->hbalock);
		/* Process the asynchronous event */
		switch (bf_get(lpfc_trailer_code, &cq_event->cqe.mcqe_cmpl)) {
		case LPFC_TRAILER_CODE_LINK:
			lpfc_sli4_async_link_evt(phba,
						 &cq_event->cqe.acqe_link);
			break;
		case LPFC_TRAILER_CODE_FCOE:
			lpfc_sli4_async_fcoe_evt(phba,
						 &cq_event->cqe.acqe_fcoe);
			break;
		case LPFC_TRAILER_CODE_DCBX:
			lpfc_sli4_async_dcbx_evt(phba,
						 &cq_event->cqe.acqe_dcbx);
			break;
		default:
			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
					"1804 Invalid asynchrous event code: "
					"x%x\n", bf_get(lpfc_trailer_code,
					&cq_event->cqe.mcqe_cmpl));
			break;
		}
		/* Free the completion event processed to the free pool */
		lpfc_sli4_cq_event_release(phba, cq_event);
	}
}

/**
 * lpfc_api_table_setup - Set up per hba pci-device group func api jump table
 * @phba: pointer to lpfc hba data structure.
 * @dev_grp: The HBA PCI-Device group number.
 *
 * This routine is invoked to set up the per HBA PCI-Device group function
 * API jump table entries.
 *
 * Return: 0 if success, otherwise -ENODEV
 **/
int
lpfc_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
{
	int rc;

	/* Set up lpfc PCI-device group */
	phba->pci_dev_grp = dev_grp;

	/* The LPFC_PCI_DEV_OC uses SLI4 */
	if (dev_grp == LPFC_PCI_DEV_OC)
		phba->sli_rev = LPFC_SLI_REV4;

	/* Set up device INIT API function jump table */
	rc = lpfc_init_api_table_setup(phba, dev_grp);
	if (rc)
		return -ENODEV;
	/* Set up SCSI API function jump table */
	rc = lpfc_scsi_api_table_setup(phba, dev_grp);
	if (rc)
		return -ENODEV;
	/* Set up SLI API function jump table */
	rc = lpfc_sli_api_table_setup(phba, dev_grp);
	if (rc)
		return -ENODEV;
	/* Set up MBOX API function jump table */
	rc = lpfc_mbox_api_table_setup(phba, dev_grp);
	if (rc)
		return -ENODEV;

	return 0;
}

/**
 * lpfc_log_intr_mode - Log the active interrupt mode
 * @phba: pointer to lpfc hba data structure.
 * @intr_mode: active interrupt mode adopted.
 *
 * This routine it invoked to log the currently used active interrupt mode
 * to the device.
 **/
static void lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode)
{
	switch (intr_mode) {
	case 0:
		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
				"0470 Enable INTx interrupt mode.\n");
		break;
	case 1:
		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
				"0481 Enabled MSI interrupt mode.\n");
		break;
	case 2:
		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
				"0480 Enabled MSI-X interrupt mode.\n");
		break;
	default:
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0482 Illegal interrupt mode.\n");
		break;
	}
	return;
}

/**
 * lpfc_enable_pci_dev - Enable a generic PCI device.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to enable the PCI device that is common to all
 * PCI devices.
 *
 * Return codes
 * 	0 - sucessful
 * 	other values - error
 **/
static int
lpfc_enable_pci_dev(struct lpfc_hba *phba)
{
	struct pci_dev *pdev;
	int bars;

	/* Obtain PCI device reference */
	if (!phba->pcidev)
		goto out_error;
	else
		pdev = phba->pcidev;
	/* Select PCI BARs */
	bars = pci_select_bars(pdev, IORESOURCE_MEM);
	/* Enable PCI device */
	if (pci_enable_device_mem(pdev))
		goto out_error;
	/* Request PCI resource for the device */
	if (pci_request_selected_regions(pdev, bars, LPFC_DRIVER_NAME))
		goto out_disable_device;
	/* Set up device as PCI master and save state for EEH */
	pci_set_master(pdev);
	pci_try_set_mwi(pdev);
	pci_save_state(pdev);

	return 0;

out_disable_device:
	pci_disable_device(pdev);
out_error:
	return -ENODEV;
}

/**
 * lpfc_disable_pci_dev - Disable a generic PCI device.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to disable the PCI device that is common to all
 * PCI devices.
 **/
static void
lpfc_disable_pci_dev(struct lpfc_hba *phba)
{
	struct pci_dev *pdev;
	int bars;

	/* Obtain PCI device reference */
	if (!phba->pcidev)
		return;
	else
		pdev = phba->pcidev;
	/* Select PCI BARs */
	bars = pci_select_bars(pdev, IORESOURCE_MEM);
	/* Release PCI resource and disable PCI device */
	pci_release_selected_regions(pdev, bars);
	pci_disable_device(pdev);
	/* Null out PCI private reference to driver */
	pci_set_drvdata(pdev, NULL);

	return;
}

/**
 * lpfc_reset_hba - Reset a hba
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to reset a hba device. It brings the HBA
 * offline, performs a board restart, and then brings the board back
 * online. The lpfc_offline calls lpfc_sli_hba_down which will clean up
 * on outstanding mailbox commands.
 **/
void
lpfc_reset_hba(struct lpfc_hba *phba)
{
	/* If resets are disabled then set error state and return. */
	if (!phba->cfg_enable_hba_reset) {
		phba->link_state = LPFC_HBA_ERROR;
		return;
	}
	lpfc_offline_prep(phba);
	lpfc_offline(phba);
	lpfc_sli_brdrestart(phba);
	lpfc_online(phba);
	lpfc_unblock_mgmt_io(phba);
}

/**
 * lpfc_sli_driver_resource_setup - Setup driver internal resources for SLI3 dev.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to set up the driver internal resources specific to
 * support the SLI-3 HBA device it attached to.
 *
 * Return codes
 * 	0 - sucessful
 * 	other values - error
 **/
static int
lpfc_sli_driver_resource_setup(struct lpfc_hba *phba)
{
	struct lpfc_sli *psli;

	/*
	 * Initialize timers used by driver
	 */

	/* Heartbeat timer */
	init_timer(&phba->hb_tmofunc);
	phba->hb_tmofunc.function = lpfc_hb_timeout;
	phba->hb_tmofunc.data = (unsigned long)phba;

	psli = &phba->sli;
	/* MBOX heartbeat timer */
	init_timer(&psli->mbox_tmo);
	psli->mbox_tmo.function = lpfc_mbox_timeout;
	psli->mbox_tmo.data = (unsigned long) phba;
	/* FCP polling mode timer */
	init_timer(&phba->fcp_poll_timer);
	phba->fcp_poll_timer.function = lpfc_poll_timeout;
	phba->fcp_poll_timer.data = (unsigned long) phba;
	/* Fabric block timer */
	init_timer(&phba->fabric_block_timer);
	phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
	phba->fabric_block_timer.data = (unsigned long) phba;
	/* EA polling mode timer */
	init_timer(&phba->eratt_poll);
	phba->eratt_poll.function = lpfc_poll_eratt;
	phba->eratt_poll.data = (unsigned long) phba;

	/* Host attention work mask setup */
	phba->work_ha_mask = (HA_ERATT | HA_MBATT | HA_LATT);
	phba->work_ha_mask |= (HA_RXMASK << (LPFC_ELS_RING * 4));

	/* Get all the module params for configuring this host */
	lpfc_get_cfgparam(phba);
	/*
	 * Since the sg_tablesize is module parameter, the sg_dma_buf_size
	 * used to create the sg_dma_buf_pool must be dynamically calculated.
	 * 2 segments are added since the IOCB needs a command and response bde.
	 */
	phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
		sizeof(struct fcp_rsp) +
			((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64));

	if (phba->cfg_enable_bg) {
		phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SEG_CNT;
		phba->cfg_sg_dma_buf_size +=
			phba->cfg_prot_sg_seg_cnt * sizeof(struct ulp_bde64);
	}

	/* Also reinitialize the host templates with new values. */
	lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
	lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;

	phba->max_vpi = LPFC_MAX_VPI;
	/* This will be set to correct value after config_port mbox */
	phba->max_vports = 0;

	/*
	 * Initialize the SLI Layer to run with lpfc HBAs.
	 */
	lpfc_sli_setup(phba);
	lpfc_sli_queue_setup(phba);

	/* Allocate device driver memory */
	if (lpfc_mem_alloc(phba, BPL_ALIGN_SZ))
		return -ENOMEM;

	return 0;
}

/**
 * lpfc_sli_driver_resource_unset - Unset drvr internal resources for SLI3 dev
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to unset the driver internal resources set up
 * specific for supporting the SLI-3 HBA device it attached to.
 **/
static void
lpfc_sli_driver_resource_unset(struct lpfc_hba *phba)
{
	/* Free device driver memory allocated */
	lpfc_mem_free_all(phba);

	return;
}

/**
 * lpfc_sli4_driver_resource_setup - Setup drvr internal resources for SLI4 dev
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to set up the driver internal resources specific to
 * support the SLI-4 HBA device it attached to.
 *
 * Return codes
 * 	0 - sucessful
 * 	other values - error
 **/
static int
lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
{
	struct lpfc_sli *psli;
	int rc;
	int i, hbq_count;

	/* Before proceed, wait for POST done and device ready */
	rc = lpfc_sli4_post_status_check(phba);
	if (rc)
		return -ENODEV;

	/*
	 * Initialize timers used by driver
	 */

	/* Heartbeat timer */
	init_timer(&phba->hb_tmofunc);
	phba->hb_tmofunc.function = lpfc_hb_timeout;
	phba->hb_tmofunc.data = (unsigned long)phba;

	psli = &phba->sli;
	/* MBOX heartbeat timer */
	init_timer(&psli->mbox_tmo);
	psli->mbox_tmo.function = lpfc_mbox_timeout;
	psli->mbox_tmo.data = (unsigned long) phba;
	/* Fabric block timer */
	init_timer(&phba->fabric_block_timer);
	phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
	phba->fabric_block_timer.data = (unsigned long) phba;
	/* EA polling mode timer */
	init_timer(&phba->eratt_poll);
	phba->eratt_poll.function = lpfc_poll_eratt;
	phba->eratt_poll.data = (unsigned long) phba;
	/*
	 * We need to do a READ_CONFIG mailbox command here before
	 * calling lpfc_get_cfgparam. For VFs this will report the
	 * MAX_XRI, MAX_VPI, MAX_RPI, MAX_IOCB, and MAX_VFI settings.
	 * All of the resources allocated
	 * for this Port are tied to these values.
	 */
	/* Get all the module params for configuring this host */
	lpfc_get_cfgparam(phba);
	phba->max_vpi = LPFC_MAX_VPI;
	/* This will be set to correct value after the read_config mbox */
	phba->max_vports = 0;

	/* Program the default value of vlan_id and fc_map */
	phba->valid_vlan = 0;
	phba->fc_map[0] = LPFC_FCOE_FCF_MAP0;
	phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
	phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;

	/*
	 * Since the sg_tablesize is module parameter, the sg_dma_buf_size
	 * used to create the sg_dma_buf_pool must be dynamically calculated.
	 * 2 segments are added since the IOCB needs a command and response bde.
	 * To insure that the scsi sgl does not cross a 4k page boundary only
	 * sgl sizes of 1k, 2k, 4k, and 8k are supported.
	 * Table of sgl sizes and seg_cnt:
	 * sgl size, 	sg_seg_cnt	total seg
	 * 1k		50		52
	 * 2k		114		116
	 * 4k		242		244
	 * 8k		498		500
	 * cmd(32) + rsp(160) + (52 * sizeof(sli4_sge)) = 1024
	 * cmd(32) + rsp(160) + (116 * sizeof(sli4_sge)) = 2048
	 * cmd(32) + rsp(160) + (244 * sizeof(sli4_sge)) = 4096
	 * cmd(32) + rsp(160) + (500 * sizeof(sli4_sge)) = 8192
	 */
	if (phba->cfg_sg_seg_cnt <= LPFC_DEFAULT_SG_SEG_CNT)
		phba->cfg_sg_seg_cnt = 50;
	else if (phba->cfg_sg_seg_cnt <= 114)
		phba->cfg_sg_seg_cnt = 114;
	else if (phba->cfg_sg_seg_cnt <= 242)
		phba->cfg_sg_seg_cnt = 242;
	else
		phba->cfg_sg_seg_cnt = 498;

	phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd)
					+ sizeof(struct fcp_rsp);
	phba->cfg_sg_dma_buf_size +=
		((phba->cfg_sg_seg_cnt + 2) * sizeof(struct sli4_sge));

	/* Initialize buffer queue management fields */
	hbq_count = lpfc_sli_hbq_count();
	for (i = 0; i < hbq_count; ++i)
		INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
	INIT_LIST_HEAD(&phba->rb_pend_list);
	phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_sli4_rb_alloc;
	phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_sli4_rb_free;

	/*
	 * Initialize the SLI Layer to run with lpfc SLI4 HBAs.
	 */
	/* Initialize the Abort scsi buffer list used by driver */
	spin_lock_init(&phba->sli4_hba.abts_scsi_buf_list_lock);
	INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_scsi_buf_list);
	/* This abort list used by worker thread */
	spin_lock_init(&phba->sli4_hba.abts_sgl_list_lock);

	/*
	 * Initialize dirver internal slow-path work queues
	 */

	/* Driver internel slow-path CQ Event pool */
	INIT_LIST_HEAD(&phba->sli4_hba.sp_cqe_event_pool);
	/* Response IOCB work queue list */
	INIT_LIST_HEAD(&phba->sli4_hba.sp_rspiocb_work_queue);
	/* Asynchronous event CQ Event work queue list */
	INIT_LIST_HEAD(&phba->sli4_hba.sp_asynce_work_queue);
	/* Fast-path XRI aborted CQ Event work queue list */
	INIT_LIST_HEAD(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue);
	/* Slow-path XRI aborted CQ Event work queue list */
	INIT_LIST_HEAD(&phba->sli4_hba.sp_els_xri_aborted_work_queue);
	/* Receive queue CQ Event work queue list */
	INIT_LIST_HEAD(&phba->sli4_hba.sp_unsol_work_queue);

	/* Initialize the driver internal SLI layer lists. */
	lpfc_sli_setup(phba);
	lpfc_sli_queue_setup(phba);

	/* Allocate device driver memory */
	rc = lpfc_mem_alloc(phba, SGL_ALIGN_SZ);
	if (rc)
		return -ENOMEM;

	/* Create the bootstrap mailbox command */
	rc = lpfc_create_bootstrap_mbox(phba);
	if (unlikely(rc))
		goto out_free_mem;

	/* Set up the host's endian order with the device. */
	rc = lpfc_setup_endian_order(phba);
	if (unlikely(rc))
		goto out_free_bsmbx;

	/* Set up the hba's configuration parameters. */
	rc = lpfc_sli4_read_config(phba);
	if (unlikely(rc))
		goto out_free_bsmbx;

	/* Perform a function reset */
	rc = lpfc_pci_function_reset(phba);
	if (unlikely(rc))
		goto out_free_bsmbx;

	/* Create all the SLI4 queues */
	rc = lpfc_sli4_queue_create(phba);
	if (rc)
		goto out_free_bsmbx;

	/* Create driver internal CQE event pool */
	rc = lpfc_sli4_cq_event_pool_create(phba);
	if (rc)
		goto out_destroy_queue;

	/* Initialize and populate the iocb list per host */
	rc = lpfc_init_sgl_list(phba);
	if (rc) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1400 Failed to initialize sgl list.\n");
		goto out_destroy_cq_event_pool;
	}
	rc = lpfc_init_active_sgl_array(phba);
	if (rc) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1430 Failed to initialize sgl list.\n");
		goto out_free_sgl_list;
	}

	rc = lpfc_sli4_init_rpi_hdrs(phba);
	if (rc) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1432 Failed to initialize rpi headers.\n");
		goto out_free_active_sgl;
	}

	phba->sli4_hba.fcp_eq_hdl = kzalloc((sizeof(struct lpfc_fcp_eq_hdl) *
				    phba->cfg_fcp_eq_count), GFP_KERNEL);
	if (!phba->sli4_hba.fcp_eq_hdl) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"2572 Failed allocate memory for fast-path "
				"per-EQ handle array\n");
		goto out_remove_rpi_hdrs;
	}

	phba->sli4_hba.msix_entries = kzalloc((sizeof(struct msix_entry) *
				      phba->sli4_hba.cfg_eqn), GFP_KERNEL);
	if (!phba->sli4_hba.msix_entries) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"2573 Failed allocate memory for msi-x "
				"interrupt vector entries\n");
		goto out_free_fcp_eq_hdl;
	}

	return rc;

out_free_fcp_eq_hdl:
	kfree(phba->sli4_hba.fcp_eq_hdl);
out_remove_rpi_hdrs:
	lpfc_sli4_remove_rpi_hdrs(phba);
out_free_active_sgl:
	lpfc_free_active_sgl(phba);
out_free_sgl_list:
	lpfc_free_sgl_list(phba);
out_destroy_cq_event_pool:
	lpfc_sli4_cq_event_pool_destroy(phba);
out_destroy_queue:
	lpfc_sli4_queue_destroy(phba);
out_free_bsmbx:
	lpfc_destroy_bootstrap_mbox(phba);
out_free_mem:
	lpfc_mem_free(phba);
	return rc;
}

/**
 * lpfc_sli4_driver_resource_unset - Unset drvr internal resources for SLI4 dev
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to unset the driver internal resources set up
 * specific for supporting the SLI-4 HBA device it attached to.
 **/
static void
lpfc_sli4_driver_resource_unset(struct lpfc_hba *phba)
{
	struct lpfc_fcf_conn_entry *conn_entry, *next_conn_entry;

	/* unregister default FCFI from the HBA */
	lpfc_sli4_fcfi_unreg(phba, phba->fcf.fcfi);

	/* Free the default FCR table */
	lpfc_sli_remove_dflt_fcf(phba);

	/* Free memory allocated for msi-x interrupt vector entries */
	kfree(phba->sli4_hba.msix_entries);

	/* Free memory allocated for fast-path work queue handles */
	kfree(phba->sli4_hba.fcp_eq_hdl);

	/* Free the allocated rpi headers. */
	lpfc_sli4_remove_rpi_hdrs(phba);
	lpfc_sli4_remove_rpis(phba);

	/* Free the ELS sgl list */
	lpfc_free_active_sgl(phba);
	lpfc_free_sgl_list(phba);

	/* Free the SCSI sgl management array */
	kfree(phba->sli4_hba.lpfc_scsi_psb_array);

	/* Free the SLI4 queues */
	lpfc_sli4_queue_destroy(phba);

	/* Free the completion queue EQ event pool */
	lpfc_sli4_cq_event_release_all(phba);
	lpfc_sli4_cq_event_pool_destroy(phba);

	/* Reset SLI4 HBA FCoE function */
	lpfc_pci_function_reset(phba);

	/* Free the bsmbx region. */
	lpfc_destroy_bootstrap_mbox(phba);

	/* Free the SLI Layer memory with SLI4 HBAs */
	lpfc_mem_free_all(phba);

	/* Free the current connect table */
	list_for_each_entry_safe(conn_entry, next_conn_entry,
		&phba->fcf_conn_rec_list, list)
		kfree(conn_entry);

	return;
}

/**
 * lpfc_init_api_table_setup - Set up init api fucntion jump table
 * @phba: The hba struct for which this call is being executed.
 * @dev_grp: The HBA PCI-Device group number.
 *
 * This routine sets up the device INIT interface API function jump table
 * in @phba struct.
 *
 * Returns: 0 - success, -ENODEV - failure.
 **/
int
lpfc_init_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
{
	switch (dev_grp) {
	case LPFC_PCI_DEV_LP:
		phba->lpfc_hba_down_post = lpfc_hba_down_post_s3;
		phba->lpfc_handle_eratt = lpfc_handle_eratt_s3;
		phba->lpfc_stop_port = lpfc_stop_port_s3;
		break;
	case LPFC_PCI_DEV_OC:
		phba->lpfc_hba_down_post = lpfc_hba_down_post_s4;
		phba->lpfc_handle_eratt = lpfc_handle_eratt_s4;
		phba->lpfc_stop_port = lpfc_stop_port_s4;
		break;
	default:
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1431 Invalid HBA PCI-device group: 0x%x\n",
				dev_grp);
		return -ENODEV;
		break;
	}
	return 0;
}

/**
 * lpfc_setup_driver_resource_phase1 - Phase1 etup driver internal resources.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to set up the driver internal resources before the
 * device specific resource setup to support the HBA device it attached to.
 *
 * Return codes
 *	0 - sucessful
 *	other values - error
 **/
static int
lpfc_setup_driver_resource_phase1(struct lpfc_hba *phba)
{
	/*
	 * Driver resources common to all SLI revisions
	 */
	atomic_set(&phba->fast_event_count, 0);
	spin_lock_init(&phba->hbalock);

	/* Initialize ndlp management spinlock */
	spin_lock_init(&phba->ndlp_lock);

	INIT_LIST_HEAD(&phba->port_list);
	INIT_LIST_HEAD(&phba->work_list);
	init_waitqueue_head(&phba->wait_4_mlo_m_q);

	/* Initialize the wait queue head for the kernel thread */
	init_waitqueue_head(&phba->work_waitq);

	/* Initialize the scsi buffer list used by driver for scsi IO */
	spin_lock_init(&phba->scsi_buf_list_lock);
	INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list);

	/* Initialize the fabric iocb list */
	INIT_LIST_HEAD(&phba->fabric_iocb_list);

	/* Initialize list to save ELS buffers */
	INIT_LIST_HEAD(&phba->elsbuf);

	/* Initialize FCF connection rec list */
	INIT_LIST_HEAD(&phba->fcf_conn_rec_list);

	return 0;
}

/**
 * lpfc_setup_driver_resource_phase2 - Phase2 setup driver internal resources.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to set up the driver internal resources after the
 * device specific resource setup to support the HBA device it attached to.
 *
 * Return codes
 * 	0 - sucessful
 * 	other values - error
 **/
static int
lpfc_setup_driver_resource_phase2(struct lpfc_hba *phba)
{
	int error;

	/* Startup the kernel thread for this host adapter. */
	phba->worker_thread = kthread_run(lpfc_do_work, phba,
					  "lpfc_worker_%d", phba->brd_no);
	if (IS_ERR(phba->worker_thread)) {
		error = PTR_ERR(phba->worker_thread);
		return error;
	}

	return 0;
}

/**
 * lpfc_unset_driver_resource_phase2 - Phase2 unset driver internal resources.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to unset the driver internal resources set up after
 * the device specific resource setup for supporting the HBA device it
 * attached to.
 **/
static void
lpfc_unset_driver_resource_phase2(struct lpfc_hba *phba)
{
	/* Stop kernel worker thread */
	kthread_stop(phba->worker_thread);
}

/**
 * lpfc_free_iocb_list - Free iocb list.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to free the driver's IOCB list and memory.
 **/
static void
lpfc_free_iocb_list(struct lpfc_hba *phba)
{
	struct lpfc_iocbq *iocbq_entry = NULL, *iocbq_next = NULL;

	spin_lock_irq(&phba->hbalock);
	list_for_each_entry_safe(iocbq_entry, iocbq_next,
				 &phba->lpfc_iocb_list, list) {
		list_del(&iocbq_entry->list);
		kfree(iocbq_entry);
		phba->total_iocbq_bufs--;
	}
	spin_unlock_irq(&phba->hbalock);

	return;
}

/**
 * lpfc_init_iocb_list - Allocate and initialize iocb list.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to allocate and initizlize the driver's IOCB
 * list and set up the IOCB tag array accordingly.
 *
 * Return codes
 *	0 - sucessful
 *	other values - error
 **/
static int
lpfc_init_iocb_list(struct lpfc_hba *phba, int iocb_count)
{
	struct lpfc_iocbq *iocbq_entry = NULL;
	uint16_t iotag;
	int i;

	/* Initialize and populate the iocb list per host.  */
	INIT_LIST_HEAD(&phba->lpfc_iocb_list);
	for (i = 0; i < iocb_count; i++) {
		iocbq_entry = kzalloc(sizeof(struct lpfc_iocbq), GFP_KERNEL);
		if (iocbq_entry == NULL) {
			printk(KERN_ERR "%s: only allocated %d iocbs of "
				"expected %d count. Unloading driver.\n",
				__func__, i, LPFC_IOCB_LIST_CNT);
			goto out_free_iocbq;
		}

		iotag = lpfc_sli_next_iotag(phba, iocbq_entry);
		if (iotag == 0) {
			kfree(iocbq_entry);
			printk(KERN_ERR "%s: failed to allocate IOTAG. "
				"Unloading driver.\n", __func__);
			goto out_free_iocbq;
		}
		iocbq_entry->sli4_xritag = NO_XRI;

		spin_lock_irq(&phba->hbalock);
		list_add(&iocbq_entry->list, &phba->lpfc_iocb_list);
		phba->total_iocbq_bufs++;
		spin_unlock_irq(&phba->hbalock);
	}

	return 0;

out_free_iocbq:
	lpfc_free_iocb_list(phba);

	return -ENOMEM;
}

/**
 * lpfc_free_sgl_list - Free sgl list.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to free the driver's sgl list and memory.
 **/
static void
lpfc_free_sgl_list(struct lpfc_hba *phba)
{
	struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
	LIST_HEAD(sglq_list);
	int rc = 0;

	spin_lock_irq(&phba->hbalock);
	list_splice_init(&phba->sli4_hba.lpfc_sgl_list, &sglq_list);
	spin_unlock_irq(&phba->hbalock);

	list_for_each_entry_safe(sglq_entry, sglq_next,
				 &sglq_list, list) {
		list_del(&sglq_entry->list);
		lpfc_mbuf_free(phba, sglq_entry->virt, sglq_entry->phys);
		kfree(sglq_entry);
		phba->sli4_hba.total_sglq_bufs--;
	}
	rc = lpfc_sli4_remove_all_sgl_pages(phba);
	if (rc) {
		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
			"2005 Unable to deregister pages from HBA: %x", rc);
	}
	kfree(phba->sli4_hba.lpfc_els_sgl_array);
}

/**
 * lpfc_init_active_sgl_array - Allocate the buf to track active ELS XRIs.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to allocate the driver's active sgl memory.
 * This array will hold the sglq_entry's for active IOs.
 **/
static int
lpfc_init_active_sgl_array(struct lpfc_hba *phba)
{
	int size;
	size = sizeof(struct lpfc_sglq *);
	size *= phba->sli4_hba.max_cfg_param.max_xri;

	phba->sli4_hba.lpfc_sglq_active_list =
		kzalloc(size, GFP_KERNEL);
	if (!phba->sli4_hba.lpfc_sglq_active_list)
		return -ENOMEM;
	return 0;
}

/**
 * lpfc_free_active_sgl - Free the buf that tracks active ELS XRIs.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to walk through the array of active sglq entries
 * and free all of the resources.
 * This is just a place holder for now.
 **/
static void
lpfc_free_active_sgl(struct lpfc_hba *phba)
{
	kfree(phba->sli4_hba.lpfc_sglq_active_list);
}

/**
 * lpfc_init_sgl_list - Allocate and initialize sgl list.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to allocate and initizlize the driver's sgl
 * list and set up the sgl xritag tag array accordingly.
 *
 * Return codes
 *	0 - sucessful
 *	other values - error
 **/
static int
lpfc_init_sgl_list(struct lpfc_hba *phba)
{
	struct lpfc_sglq *sglq_entry = NULL;
	int i;
	int els_xri_cnt;

	els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
				"2400 lpfc_init_sgl_list els %d.\n",
				els_xri_cnt);
	/* Initialize and populate the sglq list per host/VF. */
	INIT_LIST_HEAD(&phba->sli4_hba.lpfc_sgl_list);
	INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_els_sgl_list);

	/* Sanity check on XRI management */
	if (phba->sli4_hba.max_cfg_param.max_xri <= els_xri_cnt) {
		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
				"2562 No room left for SCSI XRI allocation: "
				"max_xri=%d, els_xri=%d\n",
				phba->sli4_hba.max_cfg_param.max_xri,
				els_xri_cnt);
		return -ENOMEM;
	}

	/* Allocate memory for the ELS XRI management array */
	phba->sli4_hba.lpfc_els_sgl_array =
			kzalloc((sizeof(struct lpfc_sglq *) * els_xri_cnt),
			GFP_KERNEL);

	if (!phba->sli4_hba.lpfc_els_sgl_array) {
		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
				"2401 Failed to allocate memory for ELS "
				"XRI management array of size %d.\n",
				els_xri_cnt);
		return -ENOMEM;
	}

	/* Keep the SCSI XRI into the XRI management array */
	phba->sli4_hba.scsi_xri_max =
			phba->sli4_hba.max_cfg_param.max_xri - els_xri_cnt;
	phba->sli4_hba.scsi_xri_cnt = 0;

	phba->sli4_hba.lpfc_scsi_psb_array =
			kzalloc((sizeof(struct lpfc_scsi_buf *) *
			phba->sli4_hba.scsi_xri_max), GFP_KERNEL);

	if (!phba->sli4_hba.lpfc_scsi_psb_array) {
		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
				"2563 Failed to allocate memory for SCSI "
				"XRI management array of size %d.\n",
				phba->sli4_hba.scsi_xri_max);
		kfree(phba->sli4_hba.lpfc_els_sgl_array);
		return -ENOMEM;
	}

	for (i = 0; i < els_xri_cnt; i++) {
		sglq_entry = kzalloc(sizeof(struct lpfc_sglq), GFP_KERNEL);
		if (sglq_entry == NULL) {
			printk(KERN_ERR "%s: only allocated %d sgls of "
				"expected %d count. Unloading driver.\n",
				__func__, i, els_xri_cnt);
			goto out_free_mem;
		}

		sglq_entry->sli4_xritag = lpfc_sli4_next_xritag(phba);
		if (sglq_entry->sli4_xritag == NO_XRI) {
			kfree(sglq_entry);
			printk(KERN_ERR "%s: failed to allocate XRI.\n"
				"Unloading driver.\n", __func__);
			goto out_free_mem;
		}
		sglq_entry->buff_type = GEN_BUFF_TYPE;
		sglq_entry->virt = lpfc_mbuf_alloc(phba, 0, &sglq_entry->phys);
		if (sglq_entry->virt == NULL) {
			kfree(sglq_entry);
			printk(KERN_ERR "%s: failed to allocate mbuf.\n"
				"Unloading driver.\n", __func__);
			goto out_free_mem;
		}
		sglq_entry->sgl = sglq_entry->virt;
		memset(sglq_entry->sgl, 0, LPFC_BPL_SIZE);

		/* The list order is used by later block SGL registraton */
		spin_lock_irq(&phba->hbalock);
		list_add_tail(&sglq_entry->list, &phba->sli4_hba.lpfc_sgl_list);
		phba->sli4_hba.lpfc_els_sgl_array[i] = sglq_entry;
		phba->sli4_hba.total_sglq_bufs++;
		spin_unlock_irq(&phba->hbalock);
	}
	return 0;

out_free_mem:
	kfree(phba->sli4_hba.lpfc_scsi_psb_array);
	lpfc_free_sgl_list(phba);
	return -ENOMEM;
}

/**
 * lpfc_sli4_init_rpi_hdrs - Post the rpi header memory region to the port
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to post rpi header templates to the
 * HBA consistent with the SLI-4 interface spec.  This routine
 * posts a PAGE_SIZE memory region to the port to hold up to
 * PAGE_SIZE modulo 64 rpi context headers.
 * No locks are held here because this is an initialization routine
 * called only from probe or lpfc_online when interrupts are not
 * enabled and the driver is reinitializing the device.
 *
 * Return codes
 * 	0 - sucessful
 * 	ENOMEM - No availble memory
 *      EIO - The mailbox failed to complete successfully.
 **/
int
lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *phba)
{
	int rc = 0;
	int longs;
	uint16_t rpi_count;
	struct lpfc_rpi_hdr *rpi_hdr;

	INIT_LIST_HEAD(&phba->sli4_hba.lpfc_rpi_hdr_list);

	/*
	 * Provision an rpi bitmask range for discovery. The total count
	 * is the difference between max and base + 1.
	 */
	rpi_count = phba->sli4_hba.max_cfg_param.rpi_base +
		    phba->sli4_hba.max_cfg_param.max_rpi - 1;

	longs = ((rpi_count) + BITS_PER_LONG - 1) / BITS_PER_LONG;
	phba->sli4_hba.rpi_bmask = kzalloc(longs * sizeof(unsigned long),
					   GFP_KERNEL);
	if (!phba->sli4_hba.rpi_bmask)
		return -ENOMEM;

	rpi_hdr = lpfc_sli4_create_rpi_hdr(phba);
	if (!rpi_hdr) {
		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
				"0391 Error during rpi post operation\n");
		lpfc_sli4_remove_rpis(phba);
		rc = -ENODEV;
	}

	return rc;
}

/**
 * lpfc_sli4_create_rpi_hdr - Allocate an rpi header memory region
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to allocate a single 4KB memory region to
 * support rpis and stores them in the phba.  This single region
 * provides support for up to 64 rpis.  The region is used globally
 * by the device.
 *
 * Returns:
 *   A valid rpi hdr on success.
 *   A NULL pointer on any failure.
 **/
struct lpfc_rpi_hdr *
lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba)
{
	uint16_t rpi_limit, curr_rpi_range;
	struct lpfc_dmabuf *dmabuf;
	struct lpfc_rpi_hdr *rpi_hdr;

	rpi_limit = phba->sli4_hba.max_cfg_param.rpi_base +
		    phba->sli4_hba.max_cfg_param.max_rpi - 1;

	spin_lock_irq(&phba->hbalock);
	curr_rpi_range = phba->sli4_hba.next_rpi;
	spin_unlock_irq(&phba->hbalock);

	/*
	 * The port has a limited number of rpis. The increment here
	 * is LPFC_RPI_HDR_COUNT - 1 to account for the starting value
	 * and to allow the full max_rpi range per port.
	 */
	if ((curr_rpi_range + (LPFC_RPI_HDR_COUNT - 1)) > rpi_limit)
		return NULL;

	/*
	 * First allocate the protocol header region for the port.  The
	 * port expects a 4KB DMA-mapped memory region that is 4K aligned.
	 */
	dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
	if (!dmabuf)
		return NULL;

	dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
					  LPFC_HDR_TEMPLATE_SIZE,
					  &dmabuf->phys,
					  GFP_KERNEL);
	if (!dmabuf->virt) {
		rpi_hdr = NULL;
		goto err_free_dmabuf;
	}

	memset(dmabuf->virt, 0, LPFC_HDR_TEMPLATE_SIZE);
	if (!IS_ALIGNED(dmabuf->phys, LPFC_HDR_TEMPLATE_SIZE)) {
		rpi_hdr = NULL;
		goto err_free_coherent;
	}

	/* Save the rpi header data for cleanup later. */
	rpi_hdr = kzalloc(sizeof(struct lpfc_rpi_hdr), GFP_KERNEL);
	if (!rpi_hdr)
		goto err_free_coherent;

	rpi_hdr->dmabuf = dmabuf;
	rpi_hdr->len = LPFC_HDR_TEMPLATE_SIZE;
	rpi_hdr->page_count = 1;
	spin_lock_irq(&phba->hbalock);
	rpi_hdr->start_rpi = phba->sli4_hba.next_rpi;
	list_add_tail(&rpi_hdr->list, &phba->sli4_hba.lpfc_rpi_hdr_list);

	/*
	 * The next_rpi stores the next module-64 rpi value to post
	 * in any subsequent rpi memory region postings.
	 */
	phba->sli4_hba.next_rpi += LPFC_RPI_HDR_COUNT;
	spin_unlock_irq(&phba->hbalock);
	return rpi_hdr;

 err_free_coherent:
	dma_free_coherent(&phba->pcidev->dev, LPFC_HDR_TEMPLATE_SIZE,
			  dmabuf->virt, dmabuf->phys);
 err_free_dmabuf:
	kfree(dmabuf);
	return NULL;
}

/**
 * lpfc_sli4_remove_rpi_hdrs - Remove all rpi header memory regions
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to remove all memory resources allocated
 * to support rpis. This routine presumes the caller has released all
 * rpis consumed by fabric or port logins and is prepared to have
 * the header pages removed.
 **/
void
lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba)
{
	struct lpfc_rpi_hdr *rpi_hdr, *next_rpi_hdr;

	list_for_each_entry_safe(rpi_hdr, next_rpi_hdr,
				 &phba->sli4_hba.lpfc_rpi_hdr_list, list) {
		list_del(&rpi_hdr->list);
		dma_free_coherent(&phba->pcidev->dev, rpi_hdr->len,
				  rpi_hdr->dmabuf->virt, rpi_hdr->dmabuf->phys);
		kfree(rpi_hdr->dmabuf);
		kfree(rpi_hdr);
	}

	phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
	memset(phba->sli4_hba.rpi_bmask, 0, sizeof(*phba->sli4_hba.rpi_bmask));
}

/**
 * lpfc_hba_alloc - Allocate driver hba data structure for a device.
 * @pdev: pointer to pci device data structure.
 *
 * This routine is invoked to allocate the driver hba data structure for an
 * HBA device. If the allocation is successful, the phba reference to the
 * PCI device data structure is set.
 *
 * Return codes
 *      pointer to @phba - sucessful
 *      NULL - error
 **/
static struct lpfc_hba *
lpfc_hba_alloc(struct pci_dev *pdev)
{
	struct lpfc_hba *phba;

	/* Allocate memory for HBA structure */
	phba = kzalloc(sizeof(struct lpfc_hba), GFP_KERNEL);
	if (!phba) {
		dev_err(&pdev->dev, "failed to allocate hba struct\n");
		return NULL;
	}

	/* Set reference to PCI device in HBA structure */
	phba->pcidev = pdev;

	/* Assign an unused board number */
	phba->brd_no = lpfc_get_instance();
	if (phba->brd_no < 0) {
		kfree(phba);
		return NULL;
	}

	return phba;
}

/**
 * lpfc_hba_free - Free driver hba data structure with a device.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to free the driver hba data structure with an
 * HBA device.
 **/
static void
lpfc_hba_free(struct lpfc_hba *phba)
{
	/* Release the driver assigned board number */
	idr_remove(&lpfc_hba_index, phba->brd_no);

	kfree(phba);
	return;
}

/**
 * lpfc_create_shost - Create hba physical port with associated scsi host.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to create HBA physical port and associate a SCSI
 * host with it.
 *
 * Return codes
 *      0 - sucessful
 *      other values - error
 **/
static int
lpfc_create_shost(struct lpfc_hba *phba)
{
	struct lpfc_vport *vport;
	struct Scsi_Host  *shost;

	/* Initialize HBA FC structure */
	phba->fc_edtov = FF_DEF_EDTOV;
	phba->fc_ratov = FF_DEF_RATOV;
	phba->fc_altov = FF_DEF_ALTOV;
	phba->fc_arbtov = FF_DEF_ARBTOV;

	vport = lpfc_create_port(phba, phba->brd_no, &phba->pcidev->dev);
	if (!vport)
		return -ENODEV;

	shost = lpfc_shost_from_vport(vport);
	phba->pport = vport;
	lpfc_debugfs_initialize(vport);
	/* Put reference to SCSI host to driver's device private data */
	pci_set_drvdata(phba->pcidev, shost);

	return 0;
}

/**
 * lpfc_destroy_shost - Destroy hba physical port with associated scsi host.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to destroy HBA physical port and the associated
 * SCSI host.
 **/
static void
lpfc_destroy_shost(struct lpfc_hba *phba)
{
	struct lpfc_vport *vport = phba->pport;

	/* Destroy physical port that associated with the SCSI host */
	destroy_port(vport);

	return;
}

/**
 * lpfc_setup_bg - Setup Block guard structures and debug areas.
 * @phba: pointer to lpfc hba data structure.
 * @shost: the shost to be used to detect Block guard settings.
 *
 * This routine sets up the local Block guard protocol settings for @shost.
 * This routine also allocates memory for debugging bg buffers.
 **/
static void
lpfc_setup_bg(struct lpfc_hba *phba, struct Scsi_Host *shost)
{
	int pagecnt = 10;
	if (lpfc_prot_mask && lpfc_prot_guard) {
		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
				"1478 Registering BlockGuard with the "
				"SCSI layer\n");
		scsi_host_set_prot(shost, lpfc_prot_mask);
		scsi_host_set_guard(shost, lpfc_prot_guard);
	}
	if (!_dump_buf_data) {
		while (pagecnt) {
			spin_lock_init(&_dump_buf_lock);
			_dump_buf_data =
				(char *) __get_free_pages(GFP_KERNEL, pagecnt);
			if (_dump_buf_data) {
				printk(KERN_ERR "BLKGRD allocated %d pages for "
				       "_dump_buf_data at 0x%p\n",
				       (1 << pagecnt), _dump_buf_data);
				_dump_buf_data_order = pagecnt;
				memset(_dump_buf_data, 0,
				       ((1 << PAGE_SHIFT) << pagecnt));
				break;
			} else
				--pagecnt;
		}
		if (!_dump_buf_data_order)
			printk(KERN_ERR "BLKGRD ERROR unable to allocate "
			       "memory for hexdump\n");
	} else
		printk(KERN_ERR "BLKGRD already allocated _dump_buf_data=0x%p"
		       "\n", _dump_buf_data);
	if (!_dump_buf_dif) {
		while (pagecnt) {
			_dump_buf_dif =
				(char *) __get_free_pages(GFP_KERNEL, pagecnt);
			if (_dump_buf_dif) {
				printk(KERN_ERR "BLKGRD allocated %d pages for "
				       "_dump_buf_dif at 0x%p\n",
				       (1 << pagecnt), _dump_buf_dif);
				_dump_buf_dif_order = pagecnt;
				memset(_dump_buf_dif, 0,
				       ((1 << PAGE_SHIFT) << pagecnt));
				break;
			} else
				--pagecnt;
		}
		if (!_dump_buf_dif_order)
			printk(KERN_ERR "BLKGRD ERROR unable to allocate "
			       "memory for hexdump\n");
	} else
		printk(KERN_ERR "BLKGRD already allocated _dump_buf_dif=0x%p\n",
		       _dump_buf_dif);
}

/**
 * lpfc_post_init_setup - Perform necessary device post initialization setup.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to perform all the necessary post initialization
 * setup for the device.
 **/
static void
lpfc_post_init_setup(struct lpfc_hba *phba)
{
	struct Scsi_Host  *shost;
	struct lpfc_adapter_event_header adapter_event;

	/* Get the default values for Model Name and Description */
	lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);

	/*
	 * hba setup may have changed the hba_queue_depth so we need to
	 * adjust the value of can_queue.
	 */
	shost = pci_get_drvdata(phba->pcidev);
	shost->can_queue = phba->cfg_hba_queue_depth - 10;
	if (phba->sli3_options & LPFC_SLI3_BG_ENABLED)
		lpfc_setup_bg(phba, shost);

	lpfc_host_attrib_init(shost);

	if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
		spin_lock_irq(shost->host_lock);
		lpfc_poll_start_timer(phba);
		spin_unlock_irq(shost->host_lock);
	}

	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
			"0428 Perform SCSI scan\n");
	/* Send board arrival event to upper layer */
	adapter_event.event_type = FC_REG_ADAPTER_EVENT;
	adapter_event.subcategory = LPFC_EVENT_ARRIVAL;
	fc_host_post_vendor_event(shost, fc_get_event_number(),
				  sizeof(adapter_event),
				  (char *) &adapter_event,
				  LPFC_NL_VENDOR_ID);
	return;
}

/**
 * lpfc_sli_pci_mem_setup - Setup SLI3 HBA PCI memory space.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to set up the PCI device memory space for device
 * with SLI-3 interface spec.
 *
 * Return codes
 * 	0 - sucessful
 * 	other values - error
 **/
static int
lpfc_sli_pci_mem_setup(struct lpfc_hba *phba)
{
	struct pci_dev *pdev;
	unsigned long bar0map_len, bar2map_len;
	int i, hbq_count;
	void *ptr;
	int error = -ENODEV;

	/* Obtain PCI device reference */
	if (!phba->pcidev)
		return error;
	else
		pdev = phba->pcidev;

	/* Set the device DMA mask size */
	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
		if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
			return error;

	/* Get the bus address of Bar0 and Bar2 and the number of bytes
	 * required by each mapping.
	 */
	phba->pci_bar0_map = pci_resource_start(pdev, 0);
	bar0map_len = pci_resource_len(pdev, 0);

	phba->pci_bar2_map = pci_resource_start(pdev, 2);
	bar2map_len = pci_resource_len(pdev, 2);

	/* Map HBA SLIM to a kernel virtual address. */
	phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len);
	if (!phba->slim_memmap_p) {
		dev_printk(KERN_ERR, &pdev->dev,
			   "ioremap failed for SLIM memory.\n");
		goto out;
	}

	/* Map HBA Control Registers to a kernel virtual address. */
	phba->ctrl_regs_memmap_p = ioremap(phba->pci_bar2_map, bar2map_len);
	if (!phba->ctrl_regs_memmap_p) {
		dev_printk(KERN_ERR, &pdev->dev,
			   "ioremap failed for HBA control registers.\n");
		goto out_iounmap_slim;
	}

	/* Allocate memory for SLI-2 structures */
	phba->slim2p.virt = dma_alloc_coherent(&pdev->dev,
					       SLI2_SLIM_SIZE,
					       &phba->slim2p.phys,
					       GFP_KERNEL);
	if (!phba->slim2p.virt)
		goto out_iounmap;

	memset(phba->slim2p.virt, 0, SLI2_SLIM_SIZE);
	phba->mbox = phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, mbx);
	phba->pcb = (phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, pcb));
	phba->IOCBs = (phba->slim2p.virt +
		       offsetof(struct lpfc_sli2_slim, IOCBs));

	phba->hbqslimp.virt = dma_alloc_coherent(&pdev->dev,
						 lpfc_sli_hbq_size(),
						 &phba->hbqslimp.phys,
						 GFP_KERNEL);
	if (!phba->hbqslimp.virt)
		goto out_free_slim;

	hbq_count = lpfc_sli_hbq_count();
	ptr = phba->hbqslimp.virt;
	for (i = 0; i < hbq_count; ++i) {
		phba->hbqs[i].hbq_virt = ptr;
		INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
		ptr += (lpfc_hbq_defs[i]->entry_count *
			sizeof(struct lpfc_hbq_entry));
	}
	phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_els_hbq_alloc;
	phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_els_hbq_free;

	memset(phba->hbqslimp.virt, 0, lpfc_sli_hbq_size());

	INIT_LIST_HEAD(&phba->rb_pend_list);

	phba->MBslimaddr = phba->slim_memmap_p;
	phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
	phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
	phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
	phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;

	return 0;

out_free_slim:
	dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
			  phba->slim2p.virt, phba->slim2p.phys);
out_iounmap:
	iounmap(phba->ctrl_regs_memmap_p);
out_iounmap_slim:
	iounmap(phba->slim_memmap_p);
out:
	return error;
}

/**
 * lpfc_sli_pci_mem_unset - Unset SLI3 HBA PCI memory space.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to unset the PCI device memory space for device
 * with SLI-3 interface spec.
 **/
static void
lpfc_sli_pci_mem_unset(struct lpfc_hba *phba)
{
	struct pci_dev *pdev;

	/* Obtain PCI device reference */
	if (!phba->pcidev)
		return;
	else
		pdev = phba->pcidev;

	/* Free coherent DMA memory allocated */
	dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
			  phba->hbqslimp.virt, phba->hbqslimp.phys);
	dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
			  phba->slim2p.virt, phba->slim2p.phys);

	/* I/O memory unmap */
	iounmap(phba->ctrl_regs_memmap_p);
	iounmap(phba->slim_memmap_p);

	return;
}

/**
 * lpfc_sli4_post_status_check - Wait for SLI4 POST done and check status
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to wait for SLI4 device Power On Self Test (POST)
 * done and check status.
 *
 * Return 0 if successful, otherwise -ENODEV.
 **/
int
lpfc_sli4_post_status_check(struct lpfc_hba *phba)
{
	struct lpfc_register sta_reg, uerrlo_reg, uerrhi_reg, scratchpad;
	uint32_t onlnreg0, onlnreg1;
	int i, port_error = -ENODEV;

	if (!phba->sli4_hba.STAregaddr)
		return -ENODEV;

	/* Wait up to 30 seconds for the SLI Port POST done and ready */
	for (i = 0; i < 3000; i++) {
		sta_reg.word0 = readl(phba->sli4_hba.STAregaddr);
		/* Encounter fatal POST error, break out */
		if (bf_get(lpfc_hst_state_perr, &sta_reg)) {
			port_error = -ENODEV;
			break;
		}
		if (LPFC_POST_STAGE_ARMFW_READY ==
		    bf_get(lpfc_hst_state_port_status, &sta_reg)) {
			port_error = 0;
			break;
		}
		msleep(10);
	}

	if (port_error)
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
			"1408 Failure HBA POST Status: sta_reg=0x%x, "
			"perr=x%x, sfi=x%x, nip=x%x, ipc=x%x, xrom=x%x, "
			"dl=x%x, pstatus=x%x\n", sta_reg.word0,
			bf_get(lpfc_hst_state_perr, &sta_reg),
			bf_get(lpfc_hst_state_sfi, &sta_reg),
			bf_get(lpfc_hst_state_nip, &sta_reg),
			bf_get(lpfc_hst_state_ipc, &sta_reg),
			bf_get(lpfc_hst_state_xrom, &sta_reg),
			bf_get(lpfc_hst_state_dl, &sta_reg),
			bf_get(lpfc_hst_state_port_status, &sta_reg));

	/* Log device information */
	scratchpad.word0 =  readl(phba->sli4_hba.SCRATCHPADregaddr);
	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
			"2534 Device Info: ChipType=0x%x, SliRev=0x%x, "
			"FeatureL1=0x%x, FeatureL2=0x%x\n",
			bf_get(lpfc_scratchpad_chiptype, &scratchpad),
			bf_get(lpfc_scratchpad_slirev, &scratchpad),
			bf_get(lpfc_scratchpad_featurelevel1, &scratchpad),
			bf_get(lpfc_scratchpad_featurelevel2, &scratchpad));

	/* With uncoverable error, log the error message and return error */
	onlnreg0 = readl(phba->sli4_hba.ONLINE0regaddr);
	onlnreg1 = readl(phba->sli4_hba.ONLINE1regaddr);
	if ((onlnreg0 != LPFC_ONLINE_NERR) || (onlnreg1 != LPFC_ONLINE_NERR)) {
		uerrlo_reg.word0 = readl(phba->sli4_hba.UERRLOregaddr);
		uerrhi_reg.word0 = readl(phba->sli4_hba.UERRHIregaddr);
		if (uerrlo_reg.word0 || uerrhi_reg.word0) {
			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
					"1422 HBA Unrecoverable error: "
					"uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
					"online0_reg=0x%x, online1_reg=0x%x\n",
					uerrlo_reg.word0, uerrhi_reg.word0,
					onlnreg0, onlnreg1);
		}
		return -ENODEV;
	}

	return port_error;
}

/**
 * lpfc_sli4_bar0_register_memmap - Set up SLI4 BAR0 register memory map.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to set up SLI4 BAR0 PCI config space register
 * memory map.
 **/
static void
lpfc_sli4_bar0_register_memmap(struct lpfc_hba *phba)
{
	phba->sli4_hba.UERRLOregaddr = phba->sli4_hba.conf_regs_memmap_p +
					LPFC_UERR_STATUS_LO;
	phba->sli4_hba.UERRHIregaddr = phba->sli4_hba.conf_regs_memmap_p +
					LPFC_UERR_STATUS_HI;
	phba->sli4_hba.ONLINE0regaddr = phba->sli4_hba.conf_regs_memmap_p +
					LPFC_ONLINE0;
	phba->sli4_hba.ONLINE1regaddr = phba->sli4_hba.conf_regs_memmap_p +
					LPFC_ONLINE1;
	phba->sli4_hba.SCRATCHPADregaddr = phba->sli4_hba.conf_regs_memmap_p +
					LPFC_SCRATCHPAD;
}

/**
 * lpfc_sli4_bar1_register_memmap - Set up SLI4 BAR1 register memory map.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to set up SLI4 BAR1 control status register (CSR)
 * memory map.
 **/
static void
lpfc_sli4_bar1_register_memmap(struct lpfc_hba *phba)
{

	phba->sli4_hba.STAregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
				    LPFC_HST_STATE;
	phba->sli4_hba.ISRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
				    LPFC_HST_ISR0;
	phba->sli4_hba.IMRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
				    LPFC_HST_IMR0;
	phba->sli4_hba.ISCRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
				     LPFC_HST_ISCR0;
	return;
}

/**
 * lpfc_sli4_bar2_register_memmap - Set up SLI4 BAR2 register memory map.
 * @phba: pointer to lpfc hba data structure.
 * @vf: virtual function number
 *
 * This routine is invoked to set up SLI4 BAR2 doorbell register memory map
 * based on the given viftual function number, @vf.
 *
 * Return 0 if successful, otherwise -ENODEV.
 **/
static int
lpfc_sli4_bar2_register_memmap(struct lpfc_hba *phba, uint32_t vf)
{
	if (vf > LPFC_VIR_FUNC_MAX)
		return -ENODEV;

	phba->sli4_hba.RQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
				vf * LPFC_VFR_PAGE_SIZE + LPFC_RQ_DOORBELL);
	phba->sli4_hba.WQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
				vf * LPFC_VFR_PAGE_SIZE + LPFC_WQ_DOORBELL);
	phba->sli4_hba.EQCQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
				vf * LPFC_VFR_PAGE_SIZE + LPFC_EQCQ_DOORBELL);
	phba->sli4_hba.MQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
				vf * LPFC_VFR_PAGE_SIZE + LPFC_MQ_DOORBELL);
	phba->sli4_hba.BMBXregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
				vf * LPFC_VFR_PAGE_SIZE + LPFC_BMBX);
	return 0;
}

/**
 * lpfc_create_bootstrap_mbox - Create the bootstrap mailbox
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to create the bootstrap mailbox
 * region consistent with the SLI-4 interface spec.  This
 * routine allocates all memory necessary to communicate
 * mailbox commands to the port and sets up all alignment
 * needs.  No locks are expected to be held when calling
 * this routine.
 *
 * Return codes
 * 	0 - sucessful
 * 	ENOMEM - could not allocated memory.
 **/
static int
lpfc_create_bootstrap_mbox(struct lpfc_hba *phba)
{
	uint32_t bmbx_size;
	struct lpfc_dmabuf *dmabuf;
	struct dma_address *dma_address;
	uint32_t pa_addr;
	uint64_t phys_addr;

	dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
	if (!dmabuf)
		return -ENOMEM;

	/*
	 * The bootstrap mailbox region is comprised of 2 parts
	 * plus an alignment restriction of 16 bytes.
	 */
	bmbx_size = sizeof(struct lpfc_bmbx_create) + (LPFC_ALIGN_16_BYTE - 1);
	dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
					  bmbx_size,
					  &dmabuf->phys,
					  GFP_KERNEL);
	if (!dmabuf->virt) {
		kfree(dmabuf);
		return -ENOMEM;
	}
	memset(dmabuf->virt, 0, bmbx_size);

	/*
	 * Initialize the bootstrap mailbox pointers now so that the register
	 * operations are simple later.  The mailbox dma address is required
	 * to be 16-byte aligned.  Also align the virtual memory as each
	 * maibox is copied into the bmbx mailbox region before issuing the
	 * command to the port.
	 */
	phba->sli4_hba.bmbx.dmabuf = dmabuf;
	phba->sli4_hba.bmbx.bmbx_size = bmbx_size;

	phba->sli4_hba.bmbx.avirt = PTR_ALIGN(dmabuf->virt,
					      LPFC_ALIGN_16_BYTE);
	phba->sli4_hba.bmbx.aphys = ALIGN(dmabuf->phys,
					      LPFC_ALIGN_16_BYTE);

	/*
	 * Set the high and low physical addresses now.  The SLI4 alignment
	 * requirement is 16 bytes and the mailbox is posted to the port
	 * as two 30-bit addresses.  The other data is a bit marking whether
	 * the 30-bit address is the high or low address.
	 * Upcast bmbx aphys to 64bits so shift instruction compiles
	 * clean on 32 bit machines.
	 */
	dma_address = &phba->sli4_hba.bmbx.dma_address;
	phys_addr = (uint64_t)phba->sli4_hba.bmbx.aphys;
	pa_addr = (uint32_t) ((phys_addr >> 34) & 0x3fffffff);
	dma_address->addr_hi = (uint32_t) ((pa_addr << 2) |
					   LPFC_BMBX_BIT1_ADDR_HI);

	pa_addr = (uint32_t) ((phba->sli4_hba.bmbx.aphys >> 4) & 0x3fffffff);
	dma_address->addr_lo = (uint32_t) ((pa_addr << 2) |
					   LPFC_BMBX_BIT1_ADDR_LO);
	return 0;
}

/**
 * lpfc_destroy_bootstrap_mbox - Destroy all bootstrap mailbox resources
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to teardown the bootstrap mailbox
 * region and release all host resources. This routine requires
 * the caller to ensure all mailbox commands recovered, no
 * additional mailbox comands are sent, and interrupts are disabled
 * before calling this routine.
 *
 **/
static void
lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba)
{
	dma_free_coherent(&phba->pcidev->dev,
			  phba->sli4_hba.bmbx.bmbx_size,
			  phba->sli4_hba.bmbx.dmabuf->virt,
			  phba->sli4_hba.bmbx.dmabuf->phys);

	kfree(phba->sli4_hba.bmbx.dmabuf);
	memset(&phba->sli4_hba.bmbx, 0, sizeof(struct lpfc_bmbx));
}

/**
 * lpfc_sli4_read_config - Get the config parameters.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to read the configuration parameters from the HBA.
 * The configuration parameters are used to set the base and maximum values
 * for RPI's XRI's VPI's VFI's and FCFIs. These values also affect the resource
 * allocation for the port.
 *
 * Return codes
 * 	0 - sucessful
 * 	ENOMEM - No availble memory
 *      EIO - The mailbox failed to complete successfully.
 **/
static int
lpfc_sli4_read_config(struct lpfc_hba *phba)
{
	LPFC_MBOXQ_t *pmb;
	struct lpfc_mbx_read_config *rd_config;
	uint32_t rc = 0;

	pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
	if (!pmb) {
		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
				"2011 Unable to allocate memory for issuing "
				"SLI_CONFIG_SPECIAL mailbox command\n");
		return -ENOMEM;
	}

	lpfc_read_config(phba, pmb);

	rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
	if (rc != MBX_SUCCESS) {
		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
			"2012 Mailbox failed , mbxCmd x%x "
			"READ_CONFIG, mbxStatus x%x\n",
			bf_get(lpfc_mqe_command, &pmb->u.mqe),
			bf_get(lpfc_mqe_status, &pmb->u.mqe));
		rc = -EIO;
	} else {
		rd_config = &pmb->u.mqe.un.rd_config;
		phba->sli4_hba.max_cfg_param.max_xri =
			bf_get(lpfc_mbx_rd_conf_xri_count, rd_config);
		phba->sli4_hba.max_cfg_param.xri_base =
			bf_get(lpfc_mbx_rd_conf_xri_base, rd_config);
		phba->sli4_hba.max_cfg_param.max_vpi =
			bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config);
		phba->sli4_hba.max_cfg_param.vpi_base =
			bf_get(lpfc_mbx_rd_conf_vpi_base, rd_config);
		phba->sli4_hba.max_cfg_param.max_rpi =
			bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config);
		phba->sli4_hba.max_cfg_param.rpi_base =
			bf_get(lpfc_mbx_rd_conf_rpi_base, rd_config);
		phba->sli4_hba.max_cfg_param.max_vfi =
			bf_get(lpfc_mbx_rd_conf_vfi_count, rd_config);
		phba->sli4_hba.max_cfg_param.vfi_base =
			bf_get(lpfc_mbx_rd_conf_vfi_base, rd_config);
		phba->sli4_hba.max_cfg_param.max_fcfi =
			bf_get(lpfc_mbx_rd_conf_fcfi_count, rd_config);
		phba->sli4_hba.max_cfg_param.fcfi_base =
			bf_get(lpfc_mbx_rd_conf_fcfi_base, rd_config);
		phba->sli4_hba.max_cfg_param.max_eq =
			bf_get(lpfc_mbx_rd_conf_eq_count, rd_config);
		phba->sli4_hba.max_cfg_param.max_rq =
			bf_get(lpfc_mbx_rd_conf_rq_count, rd_config);
		phba->sli4_hba.max_cfg_param.max_wq =
			bf_get(lpfc_mbx_rd_conf_wq_count, rd_config);
		phba->sli4_hba.max_cfg_param.max_cq =
			bf_get(lpfc_mbx_rd_conf_cq_count, rd_config);
		phba->lmt = bf_get(lpfc_mbx_rd_conf_lmt, rd_config);
		phba->sli4_hba.next_xri = phba->sli4_hba.max_cfg_param.xri_base;
		phba->vpi_base = phba->sli4_hba.max_cfg_param.vpi_base;
		phba->vfi_base = phba->sli4_hba.max_cfg_param.vfi_base;
		phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
		phba->max_vpi = phba->sli4_hba.max_cfg_param.max_vpi;
		phba->max_vports = phba->max_vpi;
		lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
				"2003 cfg params XRI(B:%d M:%d), "
				"VPI(B:%d M:%d) "
				"VFI(B:%d M:%d) "
				"RPI(B:%d M:%d) "
				"FCFI(B:%d M:%d)\n",
				phba->sli4_hba.max_cfg_param.xri_base,
				phba->sli4_hba.max_cfg_param.max_xri,
				phba->sli4_hba.max_cfg_param.vpi_base,
				phba->sli4_hba.max_cfg_param.max_vpi,
				phba->sli4_hba.max_cfg_param.vfi_base,
				phba->sli4_hba.max_cfg_param.max_vfi,
				phba->sli4_hba.max_cfg_param.rpi_base,
				phba->sli4_hba.max_cfg_param.max_rpi,
				phba->sli4_hba.max_cfg_param.fcfi_base,
				phba->sli4_hba.max_cfg_param.max_fcfi);
	}
	mempool_free(pmb, phba->mbox_mem_pool);

	/* Reset the DFT_HBA_Q_DEPTH to the max xri  */
	if (phba->cfg_hba_queue_depth > (phba->sli4_hba.max_cfg_param.max_xri))
		phba->cfg_hba_queue_depth =
				phba->sli4_hba.max_cfg_param.max_xri;
	return rc;
}

/**
 * lpfc_dev_endian_order_setup - Notify the port of the host's endian order.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to setup the host-side endian order to the
 * HBA consistent with the SLI-4 interface spec.
 *
 * Return codes
 * 	0 - sucessful
 * 	ENOMEM - No availble memory
 *      EIO - The mailbox failed to complete successfully.
 **/
static int
lpfc_setup_endian_order(struct lpfc_hba *phba)
{
	LPFC_MBOXQ_t *mboxq;
	uint32_t rc = 0;
	uint32_t endian_mb_data[2] = {HOST_ENDIAN_LOW_WORD0,
				      HOST_ENDIAN_HIGH_WORD1};

	mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
	if (!mboxq) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0492 Unable to allocate memory for issuing "
				"SLI_CONFIG_SPECIAL mailbox command\n");
		return -ENOMEM;
	}

	/*
	 * The SLI4_CONFIG_SPECIAL mailbox command requires the first two
	 * words to contain special data values and no other data.
	 */
	memset(mboxq, 0, sizeof(LPFC_MBOXQ_t));
	memcpy(&mboxq->u.mqe, &endian_mb_data, sizeof(endian_mb_data));
	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
	if (rc != MBX_SUCCESS) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0493 SLI_CONFIG_SPECIAL mailbox failed with "
				"status x%x\n",
				rc);
		rc = -EIO;
	}

	mempool_free(mboxq, phba->mbox_mem_pool);
	return rc;
}

/**
 * lpfc_sli4_queue_create - Create all the SLI4 queues
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to allocate all the SLI4 queues for the FCoE HBA
 * operation. For each SLI4 queue type, the parameters such as queue entry
 * count (queue depth) shall be taken from the module parameter. For now,
 * we just use some constant number as place holder.
 *
 * Return codes
 *      0 - sucessful
 *      ENOMEM - No availble memory
 *      EIO - The mailbox failed to complete successfully.
 **/
static int
lpfc_sli4_queue_create(struct lpfc_hba *phba)
{
	struct lpfc_queue *qdesc;
	int fcp_eqidx, fcp_cqidx, fcp_wqidx;
	int cfg_fcp_wq_count;
	int cfg_fcp_eq_count;

	/*
	 * Sanity check for confiugred queue parameters against the run-time
	 * device parameters
	 */

	/* Sanity check on FCP fast-path WQ parameters */
	cfg_fcp_wq_count = phba->cfg_fcp_wq_count;
	if (cfg_fcp_wq_count >
	    (phba->sli4_hba.max_cfg_param.max_wq - LPFC_SP_WQN_DEF)) {
		cfg_fcp_wq_count = phba->sli4_hba.max_cfg_param.max_wq -
				   LPFC_SP_WQN_DEF;
		if (cfg_fcp_wq_count < LPFC_FP_WQN_MIN) {
			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
					"2581 Not enough WQs (%d) from "
					"the pci function for supporting "
					"FCP WQs (%d)\n",
					phba->sli4_hba.max_cfg_param.max_wq,
					phba->cfg_fcp_wq_count);
			goto out_error;
		}
		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
				"2582 Not enough WQs (%d) from the pci "
				"function for supporting the requested "
				"FCP WQs (%d), the actual FCP WQs can "
				"be supported: %d\n",
				phba->sli4_hba.max_cfg_param.max_wq,
				phba->cfg_fcp_wq_count, cfg_fcp_wq_count);
	}
	/* The actual number of FCP work queues adopted */
	phba->cfg_fcp_wq_count = cfg_fcp_wq_count;

	/* Sanity check on FCP fast-path EQ parameters */
	cfg_fcp_eq_count = phba->cfg_fcp_eq_count;
	if (cfg_fcp_eq_count >
	    (phba->sli4_hba.max_cfg_param.max_eq - LPFC_SP_EQN_DEF)) {
		cfg_fcp_eq_count = phba->sli4_hba.max_cfg_param.max_eq -
				   LPFC_SP_EQN_DEF;
		if (cfg_fcp_eq_count < LPFC_FP_EQN_MIN) {
			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
					"2574 Not enough EQs (%d) from the "
					"pci function for supporting FCP "
					"EQs (%d)\n",
					phba->sli4_hba.max_cfg_param.max_eq,
					phba->cfg_fcp_eq_count);
			goto out_error;
		}
		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
				"2575 Not enough EQs (%d) from the pci "
				"function for supporting the requested "
				"FCP EQs (%d), the actual FCP EQs can "
				"be supported: %d\n",
				phba->sli4_hba.max_cfg_param.max_eq,
				phba->cfg_fcp_eq_count, cfg_fcp_eq_count);
	}
	/* It does not make sense to have more EQs than WQs */
	if (cfg_fcp_eq_count > phba->cfg_fcp_wq_count) {
		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
				"2593 The number of FCP EQs (%d) is more "
				"than the number of FCP WQs (%d), take "
				"the number of FCP EQs same as than of "
				"WQs (%d)\n", cfg_fcp_eq_count,
				phba->cfg_fcp_wq_count,
				phba->cfg_fcp_wq_count);
		cfg_fcp_eq_count = phba->cfg_fcp_wq_count;
	}
	/* The actual number of FCP event queues adopted */
	phba->cfg_fcp_eq_count = cfg_fcp_eq_count;
	/* The overall number of event queues used */
	phba->sli4_hba.cfg_eqn = phba->cfg_fcp_eq_count + LPFC_SP_EQN_DEF;

	/*
	 * Create Event Queues (EQs)
	 */

	/* Get EQ depth from module parameter, fake the default for now */
	phba->sli4_hba.eq_esize = LPFC_EQE_SIZE_4B;
	phba->sli4_hba.eq_ecount = LPFC_EQE_DEF_COUNT;

	/* Create slow path event queue */
	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.eq_esize,
				      phba->sli4_hba.eq_ecount);
	if (!qdesc) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0496 Failed allocate slow-path EQ\n");
		goto out_error;
	}
	phba->sli4_hba.sp_eq = qdesc;

	/* Create fast-path FCP Event Queue(s) */
	phba->sli4_hba.fp_eq = kzalloc((sizeof(struct lpfc_queue *) *
			       phba->cfg_fcp_eq_count), GFP_KERNEL);
	if (!phba->sli4_hba.fp_eq) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"2576 Failed allocate memory for fast-path "
				"EQ record array\n");
		goto out_free_sp_eq;
	}
	for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
		qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.eq_esize,
					      phba->sli4_hba.eq_ecount);
		if (!qdesc) {
			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
					"0497 Failed allocate fast-path EQ\n");
			goto out_free_fp_eq;
		}
		phba->sli4_hba.fp_eq[fcp_eqidx] = qdesc;
	}

	/*
	 * Create Complete Queues (CQs)
	 */

	/* Get CQ depth from module parameter, fake the default for now */
	phba->sli4_hba.cq_esize = LPFC_CQE_SIZE;
	phba->sli4_hba.cq_ecount = LPFC_CQE_DEF_COUNT;

	/* Create slow-path Mailbox Command Complete Queue */
	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
				      phba->sli4_hba.cq_ecount);
	if (!qdesc) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0500 Failed allocate slow-path mailbox CQ\n");
		goto out_free_fp_eq;
	}
	phba->sli4_hba.mbx_cq = qdesc;

	/* Create slow-path ELS Complete Queue */
	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
				      phba->sli4_hba.cq_ecount);
	if (!qdesc) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0501 Failed allocate slow-path ELS CQ\n");
		goto out_free_mbx_cq;
	}
	phba->sli4_hba.els_cq = qdesc;

	/* Create slow-path Unsolicited Receive Complete Queue */
	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
				      phba->sli4_hba.cq_ecount);
	if (!qdesc) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0502 Failed allocate slow-path USOL RX CQ\n");
		goto out_free_els_cq;
	}
	phba->sli4_hba.rxq_cq = qdesc;

	/* Create fast-path FCP Completion Queue(s), one-to-one with EQs */
	phba->sli4_hba.fcp_cq = kzalloc((sizeof(struct lpfc_queue *) *
				phba->cfg_fcp_eq_count), GFP_KERNEL);
	if (!phba->sli4_hba.fcp_cq) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"2577 Failed allocate memory for fast-path "
				"CQ record array\n");
		goto out_free_rxq_cq;
	}
	for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
		qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
					      phba->sli4_hba.cq_ecount);
		if (!qdesc) {
			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
					"0499 Failed allocate fast-path FCP "
					"CQ (%d)\n", fcp_cqidx);
			goto out_free_fcp_cq;
		}
		phba->sli4_hba.fcp_cq[fcp_cqidx] = qdesc;
	}

	/* Create Mailbox Command Queue */
	phba->sli4_hba.mq_esize = LPFC_MQE_SIZE;
	phba->sli4_hba.mq_ecount = LPFC_MQE_DEF_COUNT;

	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.mq_esize,
				      phba->sli4_hba.mq_ecount);
	if (!qdesc) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0505 Failed allocate slow-path MQ\n");
		goto out_free_fcp_cq;
	}
	phba->sli4_hba.mbx_wq = qdesc;

	/*
	 * Create all the Work Queues (WQs)
	 */
	phba->sli4_hba.wq_esize = LPFC_WQE_SIZE;
	phba->sli4_hba.wq_ecount = LPFC_WQE_DEF_COUNT;

	/* Create slow-path ELS Work Queue */
	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.wq_esize,
				      phba->sli4_hba.wq_ecount);
	if (!qdesc) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0504 Failed allocate slow-path ELS WQ\n");
		goto out_free_mbx_wq;
	}
	phba->sli4_hba.els_wq = qdesc;

	/* Create fast-path FCP Work Queue(s) */
	phba->sli4_hba.fcp_wq = kzalloc((sizeof(struct lpfc_queue *) *
				phba->cfg_fcp_wq_count), GFP_KERNEL);
	if (!phba->sli4_hba.fcp_wq) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"2578 Failed allocate memory for fast-path "
				"WQ record array\n");
		goto out_free_els_wq;
	}
	for (fcp_wqidx = 0; fcp_wqidx < phba->cfg_fcp_wq_count; fcp_wqidx++) {
		qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.wq_esize,
					      phba->sli4_hba.wq_ecount);
		if (!qdesc) {
			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
					"0503 Failed allocate fast-path FCP "
					"WQ (%d)\n", fcp_wqidx);
			goto out_free_fcp_wq;
		}
		phba->sli4_hba.fcp_wq[fcp_wqidx] = qdesc;
	}

	/*
	 * Create Receive Queue (RQ)
	 */
	phba->sli4_hba.rq_esize = LPFC_RQE_SIZE;
	phba->sli4_hba.rq_ecount = LPFC_RQE_DEF_COUNT;

	/* Create Receive Queue for header */
	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.rq_esize,
				      phba->sli4_hba.rq_ecount);
	if (!qdesc) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0506 Failed allocate receive HRQ\n");
		goto out_free_fcp_wq;
	}
	phba->sli4_hba.hdr_rq = qdesc;

	/* Create Receive Queue for data */
	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.rq_esize,
				      phba->sli4_hba.rq_ecount);
	if (!qdesc) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0507 Failed allocate receive DRQ\n");
		goto out_free_hdr_rq;
	}
	phba->sli4_hba.dat_rq = qdesc;

	return 0;

out_free_hdr_rq:
	lpfc_sli4_queue_free(phba->sli4_hba.hdr_rq);
	phba->sli4_hba.hdr_rq = NULL;
out_free_fcp_wq:
	for (--fcp_wqidx; fcp_wqidx >= 0; fcp_wqidx--) {
		lpfc_sli4_queue_free(phba->sli4_hba.fcp_wq[fcp_wqidx]);
		phba->sli4_hba.fcp_wq[fcp_wqidx] = NULL;
	}
	kfree(phba->sli4_hba.fcp_wq);
out_free_els_wq:
	lpfc_sli4_queue_free(phba->sli4_hba.els_wq);
	phba->sli4_hba.els_wq = NULL;
out_free_mbx_wq:
	lpfc_sli4_queue_free(phba->sli4_hba.mbx_wq);
	phba->sli4_hba.mbx_wq = NULL;
out_free_fcp_cq:
	for (--fcp_cqidx; fcp_cqidx >= 0; fcp_cqidx--) {
		lpfc_sli4_queue_free(phba->sli4_hba.fcp_cq[fcp_cqidx]);
		phba->sli4_hba.fcp_cq[fcp_cqidx] = NULL;
	}
	kfree(phba->sli4_hba.fcp_cq);
out_free_rxq_cq:
	lpfc_sli4_queue_free(phba->sli4_hba.rxq_cq);
	phba->sli4_hba.rxq_cq = NULL;
out_free_els_cq:
	lpfc_sli4_queue_free(phba->sli4_hba.els_cq);
	phba->sli4_hba.els_cq = NULL;
out_free_mbx_cq:
	lpfc_sli4_queue_free(phba->sli4_hba.mbx_cq);
	phba->sli4_hba.mbx_cq = NULL;
out_free_fp_eq:
	for (--fcp_eqidx; fcp_eqidx >= 0; fcp_eqidx--) {
		lpfc_sli4_queue_free(phba->sli4_hba.fp_eq[fcp_eqidx]);
		phba->sli4_hba.fp_eq[fcp_eqidx] = NULL;
	}
	kfree(phba->sli4_hba.fp_eq);
out_free_sp_eq:
	lpfc_sli4_queue_free(phba->sli4_hba.sp_eq);
	phba->sli4_hba.sp_eq = NULL;
out_error:
	return -ENOMEM;
}

/**
 * lpfc_sli4_queue_destroy - Destroy all the SLI4 queues
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to release all the SLI4 queues with the FCoE HBA
 * operation.
 *
 * Return codes
 *      0 - sucessful
 *      ENOMEM - No availble memory
 *      EIO - The mailbox failed to complete successfully.
 **/
static void
lpfc_sli4_queue_destroy(struct lpfc_hba *phba)
{
	int fcp_qidx;

	/* Release mailbox command work queue */
	lpfc_sli4_queue_free(phba->sli4_hba.mbx_wq);
	phba->sli4_hba.mbx_wq = NULL;

	/* Release ELS work queue */
	lpfc_sli4_queue_free(phba->sli4_hba.els_wq);
	phba->sli4_hba.els_wq = NULL;

	/* Release FCP work queue */
	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++)
		lpfc_sli4_queue_free(phba->sli4_hba.fcp_wq[fcp_qidx]);
	kfree(phba->sli4_hba.fcp_wq);
	phba->sli4_hba.fcp_wq = NULL;

	/* Release unsolicited receive queue */
	lpfc_sli4_queue_free(phba->sli4_hba.hdr_rq);
	phba->sli4_hba.hdr_rq = NULL;
	lpfc_sli4_queue_free(phba->sli4_hba.dat_rq);
	phba->sli4_hba.dat_rq = NULL;

	/* Release unsolicited receive complete queue */
	lpfc_sli4_queue_free(phba->sli4_hba.rxq_cq);
	phba->sli4_hba.rxq_cq = NULL;

	/* Release ELS complete queue */
	lpfc_sli4_queue_free(phba->sli4_hba.els_cq);
	phba->sli4_hba.els_cq = NULL;

	/* Release mailbox command complete queue */
	lpfc_sli4_queue_free(phba->sli4_hba.mbx_cq);
	phba->sli4_hba.mbx_cq = NULL;

	/* Release FCP response complete queue */
	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
		lpfc_sli4_queue_free(phba->sli4_hba.fcp_cq[fcp_qidx]);
	kfree(phba->sli4_hba.fcp_cq);
	phba->sli4_hba.fcp_cq = NULL;

	/* Release fast-path event queue */
	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
		lpfc_sli4_queue_free(phba->sli4_hba.fp_eq[fcp_qidx]);
	kfree(phba->sli4_hba.fp_eq);
	phba->sli4_hba.fp_eq = NULL;

	/* Release slow-path event queue */
	lpfc_sli4_queue_free(phba->sli4_hba.sp_eq);
	phba->sli4_hba.sp_eq = NULL;

	return;
}

/**
 * lpfc_sli4_queue_setup - Set up all the SLI4 queues
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to set up all the SLI4 queues for the FCoE HBA
 * operation.
 *
 * Return codes
 *      0 - sucessful
 *      ENOMEM - No availble memory
 *      EIO - The mailbox failed to complete successfully.
 **/
int
lpfc_sli4_queue_setup(struct lpfc_hba *phba)
{
	int rc = -ENOMEM;
	int fcp_eqidx, fcp_cqidx, fcp_wqidx;
	int fcp_cq_index = 0;

	/*
	 * Set up Event Queues (EQs)
	 */

	/* Set up slow-path event queue */
	if (!phba->sli4_hba.sp_eq) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0520 Slow-path EQ not allocated\n");
		goto out_error;
	}
	rc = lpfc_eq_create(phba, phba->sli4_hba.sp_eq,
			    LPFC_SP_DEF_IMAX);
	if (rc) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0521 Failed setup of slow-path EQ: "
				"rc = 0x%x\n", rc);
		goto out_error;
	}
	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
			"2583 Slow-path EQ setup: queue-id=%d\n",
			phba->sli4_hba.sp_eq->queue_id);

	/* Set up fast-path event queue */
	for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
		if (!phba->sli4_hba.fp_eq[fcp_eqidx]) {
			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
					"0522 Fast-path EQ (%d) not "
					"allocated\n", fcp_eqidx);
			goto out_destroy_fp_eq;
		}
		rc = lpfc_eq_create(phba, phba->sli4_hba.fp_eq[fcp_eqidx],
				    phba->cfg_fcp_imax);
		if (rc) {
			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
					"0523 Failed setup of fast-path EQ "
					"(%d), rc = 0x%x\n", fcp_eqidx, rc);
			goto out_destroy_fp_eq;
		}
		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
				"2584 Fast-path EQ setup: "
				"queue[%d]-id=%d\n", fcp_eqidx,
				phba->sli4_hba.fp_eq[fcp_eqidx]->queue_id);
	}

	/*
	 * Set up Complete Queues (CQs)
	 */

	/* Set up slow-path MBOX Complete Queue as the first CQ */
	if (!phba->sli4_hba.mbx_cq) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0528 Mailbox CQ not allocated\n");
		goto out_destroy_fp_eq;
	}
	rc = lpfc_cq_create(phba, phba->sli4_hba.mbx_cq, phba->sli4_hba.sp_eq,
			    LPFC_MCQ, LPFC_MBOX);
	if (rc) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0529 Failed setup of slow-path mailbox CQ: "
				"rc = 0x%x\n", rc);
		goto out_destroy_fp_eq;
	}
	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
			"2585 MBX CQ setup: cq-id=%d, parent eq-id=%d\n",
			phba->sli4_hba.mbx_cq->queue_id,
			phba->sli4_hba.sp_eq->queue_id);

	/* Set up slow-path ELS Complete Queue */
	if (!phba->sli4_hba.els_cq) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0530 ELS CQ not allocated\n");
		goto out_destroy_mbx_cq;
	}
	rc = lpfc_cq_create(phba, phba->sli4_hba.els_cq, phba->sli4_hba.sp_eq,
			    LPFC_WCQ, LPFC_ELS);
	if (rc) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0531 Failed setup of slow-path ELS CQ: "
				"rc = 0x%x\n", rc);
		goto out_destroy_mbx_cq;
	}
	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
			"2586 ELS CQ setup: cq-id=%d, parent eq-id=%d\n",
			phba->sli4_hba.els_cq->queue_id,
			phba->sli4_hba.sp_eq->queue_id);

	/* Set up slow-path Unsolicited Receive Complete Queue */
	if (!phba->sli4_hba.rxq_cq) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0532 USOL RX CQ not allocated\n");
		goto out_destroy_els_cq;
	}
	rc = lpfc_cq_create(phba, phba->sli4_hba.rxq_cq, phba->sli4_hba.sp_eq,
			    LPFC_RCQ, LPFC_USOL);
	if (rc) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0533 Failed setup of slow-path USOL RX CQ: "
				"rc = 0x%x\n", rc);
		goto out_destroy_els_cq;
	}
	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
			"2587 USL CQ setup: cq-id=%d, parent eq-id=%d\n",
			phba->sli4_hba.rxq_cq->queue_id,
			phba->sli4_hba.sp_eq->queue_id);

	/* Set up fast-path FCP Response Complete Queue */
	for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
		if (!phba->sli4_hba.fcp_cq[fcp_cqidx]) {
			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
					"0526 Fast-path FCP CQ (%d) not "
					"allocated\n", fcp_cqidx);
			goto out_destroy_fcp_cq;
		}
		rc = lpfc_cq_create(phba, phba->sli4_hba.fcp_cq[fcp_cqidx],
				    phba->sli4_hba.fp_eq[fcp_cqidx],
				    LPFC_WCQ, LPFC_FCP);
		if (rc) {
			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
					"0527 Failed setup of fast-path FCP "
					"CQ (%d), rc = 0x%x\n", fcp_cqidx, rc);
			goto out_destroy_fcp_cq;
		}
		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
				"2588 FCP CQ setup: cq[%d]-id=%d, "
				"parent eq[%d]-id=%d\n",
				fcp_cqidx,
				phba->sli4_hba.fcp_cq[fcp_cqidx]->queue_id,
				fcp_cqidx,
				phba->sli4_hba.fp_eq[fcp_cqidx]->queue_id);
	}

	/*
	 * Set up all the Work Queues (WQs)
	 */

	/* Set up Mailbox Command Queue */
	if (!phba->sli4_hba.mbx_wq) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0538 Slow-path MQ not allocated\n");
		goto out_destroy_fcp_cq;
	}
	rc = lpfc_mq_create(phba, phba->sli4_hba.mbx_wq,
			    phba->sli4_hba.mbx_cq, LPFC_MBOX);
	if (rc) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0539 Failed setup of slow-path MQ: "
				"rc = 0x%x\n", rc);
		goto out_destroy_fcp_cq;
	}
	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
			"2589 MBX MQ setup: wq-id=%d, parent cq-id=%d\n",
			phba->sli4_hba.mbx_wq->queue_id,
			phba->sli4_hba.mbx_cq->queue_id);

	/* Set up slow-path ELS Work Queue */
	if (!phba->sli4_hba.els_wq) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0536 Slow-path ELS WQ not allocated\n");
		goto out_destroy_mbx_wq;
	}
	rc = lpfc_wq_create(phba, phba->sli4_hba.els_wq,
			    phba->sli4_hba.els_cq, LPFC_ELS);
	if (rc) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0537 Failed setup of slow-path ELS WQ: "
				"rc = 0x%x\n", rc);
		goto out_destroy_mbx_wq;
	}
	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
			"2590 ELS WQ setup: wq-id=%d, parent cq-id=%d\n",
			phba->sli4_hba.els_wq->queue_id,
			phba->sli4_hba.els_cq->queue_id);

	/* Set up fast-path FCP Work Queue */
	for (fcp_wqidx = 0; fcp_wqidx < phba->cfg_fcp_wq_count; fcp_wqidx++) {
		if (!phba->sli4_hba.fcp_wq[fcp_wqidx]) {
			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
					"0534 Fast-path FCP WQ (%d) not "
					"allocated\n", fcp_wqidx);
			goto out_destroy_fcp_wq;
		}
		rc = lpfc_wq_create(phba, phba->sli4_hba.fcp_wq[fcp_wqidx],
				    phba->sli4_hba.fcp_cq[fcp_cq_index],
				    LPFC_FCP);
		if (rc) {
			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
					"0535 Failed setup of fast-path FCP "
					"WQ (%d), rc = 0x%x\n", fcp_wqidx, rc);
			goto out_destroy_fcp_wq;
		}
		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
				"2591 FCP WQ setup: wq[%d]-id=%d, "
				"parent cq[%d]-id=%d\n",
				fcp_wqidx,
				phba->sli4_hba.fcp_wq[fcp_wqidx]->queue_id,
				fcp_cq_index,
				phba->sli4_hba.fcp_cq[fcp_cq_index]->queue_id);
		/* Round robin FCP Work Queue's Completion Queue assignment */
		fcp_cq_index = ((fcp_cq_index + 1) % phba->cfg_fcp_eq_count);
	}

	/*
	 * Create Receive Queue (RQ)
	 */
	if (!phba->sli4_hba.hdr_rq || !phba->sli4_hba.dat_rq) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0540 Receive Queue not allocated\n");
		goto out_destroy_fcp_wq;
	}
	rc = lpfc_rq_create(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq,
			    phba->sli4_hba.rxq_cq, LPFC_USOL);
	if (rc) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0541 Failed setup of Receive Queue: "
				"rc = 0x%x\n", rc);
		goto out_destroy_fcp_wq;
	}
	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
			"2592 USL RQ setup: hdr-rq-id=%d, dat-rq-id=%d "
			"parent cq-id=%d\n",
			phba->sli4_hba.hdr_rq->queue_id,
			phba->sli4_hba.dat_rq->queue_id,
			phba->sli4_hba.rxq_cq->queue_id);
	return 0;

out_destroy_fcp_wq:
	for (--fcp_wqidx; fcp_wqidx >= 0; fcp_wqidx--)
		lpfc_wq_destroy(phba, phba->sli4_hba.fcp_wq[fcp_wqidx]);
	lpfc_wq_destroy(phba, phba->sli4_hba.els_wq);
out_destroy_mbx_wq:
	lpfc_mq_destroy(phba, phba->sli4_hba.mbx_wq);
out_destroy_fcp_cq:
	for (--fcp_cqidx; fcp_cqidx >= 0; fcp_cqidx--)
		lpfc_cq_destroy(phba, phba->sli4_hba.fcp_cq[fcp_cqidx]);
	lpfc_cq_destroy(phba, phba->sli4_hba.rxq_cq);
out_destroy_els_cq:
	lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
out_destroy_mbx_cq:
	lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq);
out_destroy_fp_eq:
	for (--fcp_eqidx; fcp_eqidx >= 0; fcp_eqidx--)
		lpfc_eq_destroy(phba, phba->sli4_hba.fp_eq[fcp_eqidx]);
	lpfc_eq_destroy(phba, phba->sli4_hba.sp_eq);
out_error:
	return rc;
}

/**
 * lpfc_sli4_queue_unset - Unset all the SLI4 queues
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to unset all the SLI4 queues with the FCoE HBA
 * operation.
 *
 * Return codes
 *      0 - sucessful
 *      ENOMEM - No availble memory
 *      EIO - The mailbox failed to complete successfully.
 **/
void
lpfc_sli4_queue_unset(struct lpfc_hba *phba)
{
	int fcp_qidx;

	/* Unset mailbox command work queue */
	lpfc_mq_destroy(phba, phba->sli4_hba.mbx_wq);
	/* Unset ELS work queue */
	lpfc_wq_destroy(phba, phba->sli4_hba.els_wq);
	/* Unset unsolicited receive queue */
	lpfc_rq_destroy(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq);
	/* Unset FCP work queue */
	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++)
		lpfc_wq_destroy(phba, phba->sli4_hba.fcp_wq[fcp_qidx]);
	/* Unset mailbox command complete queue */
	lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq);
	/* Unset ELS complete queue */
	lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
	/* Unset unsolicited receive complete queue */
	lpfc_cq_destroy(phba, phba->sli4_hba.rxq_cq);
	/* Unset FCP response complete queue */
	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
		lpfc_cq_destroy(phba, phba->sli4_hba.fcp_cq[fcp_qidx]);
	/* Unset fast-path event queue */
	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
		lpfc_eq_destroy(phba, phba->sli4_hba.fp_eq[fcp_qidx]);
	/* Unset slow-path event queue */
	lpfc_eq_destroy(phba, phba->sli4_hba.sp_eq);
}

/**
 * lpfc_sli4_cq_event_pool_create - Create completion-queue event free pool
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to allocate and set up a pool of completion queue
 * events. The body of the completion queue event is a completion queue entry
 * CQE. For now, this pool is used for the interrupt service routine to queue
 * the following HBA completion queue events for the worker thread to process:
 *   - Mailbox asynchronous events
 *   - Receive queue completion unsolicited events
 * Later, this can be used for all the slow-path events.
 *
 * Return codes
 *      0 - sucessful
 *      -ENOMEM - No availble memory
 **/
static int
lpfc_sli4_cq_event_pool_create(struct lpfc_hba *phba)
{
	struct lpfc_cq_event *cq_event;
	int i;

	for (i = 0; i < (4 * phba->sli4_hba.cq_ecount); i++) {
		cq_event = kmalloc(sizeof(struct lpfc_cq_event), GFP_KERNEL);
		if (!cq_event)
			goto out_pool_create_fail;
		list_add_tail(&cq_event->list,
			      &phba->sli4_hba.sp_cqe_event_pool);
	}
	return 0;

out_pool_create_fail:
	lpfc_sli4_cq_event_pool_destroy(phba);
	return -ENOMEM;
}

/**
 * lpfc_sli4_cq_event_pool_destroy - Free completion-queue event free pool
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to free the pool of completion queue events at
 * driver unload time. Note that, it is the responsibility of the driver
 * cleanup routine to free all the outstanding completion-queue events
 * allocated from this pool back into the pool before invoking this routine
 * to destroy the pool.
 **/
static void
lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *phba)
{
	struct lpfc_cq_event *cq_event, *next_cq_event;

	list_for_each_entry_safe(cq_event, next_cq_event,
				 &phba->sli4_hba.sp_cqe_event_pool, list) {
		list_del(&cq_event->list);
		kfree(cq_event);
	}
}

/**
 * __lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is the lock free version of the API invoked to allocate a
 * completion-queue event from the free pool.
 *
 * Return: Pointer to the newly allocated completion-queue event if successful
 *         NULL otherwise.
 **/
struct lpfc_cq_event *
__lpfc_sli4_cq_event_alloc(struct lpfc_hba *phba)
{
	struct lpfc_cq_event *cq_event = NULL;

	list_remove_head(&phba->sli4_hba.sp_cqe_event_pool, cq_event,
			 struct lpfc_cq_event, list);
	return cq_event;
}

/**
 * lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is the lock version of the API invoked to allocate a
 * completion-queue event from the free pool.
 *
 * Return: Pointer to the newly allocated completion-queue event if successful
 *         NULL otherwise.
 **/
struct lpfc_cq_event *
lpfc_sli4_cq_event_alloc(struct lpfc_hba *phba)
{
	struct lpfc_cq_event *cq_event;
	unsigned long iflags;

	spin_lock_irqsave(&phba->hbalock, iflags);
	cq_event = __lpfc_sli4_cq_event_alloc(phba);
	spin_unlock_irqrestore(&phba->hbalock, iflags);
	return cq_event;
}

/**
 * __lpfc_sli4_cq_event_release - Release a completion-queue event to free pool
 * @phba: pointer to lpfc hba data structure.
 * @cq_event: pointer to the completion queue event to be freed.
 *
 * This routine is the lock free version of the API invoked to release a
 * completion-queue event back into the free pool.
 **/
void
__lpfc_sli4_cq_event_release(struct lpfc_hba *phba,
			     struct lpfc_cq_event *cq_event)
{
	list_add_tail(&cq_event->list, &phba->sli4_hba.sp_cqe_event_pool);
}

/**
 * lpfc_sli4_cq_event_release - Release a completion-queue event to free pool
 * @phba: pointer to lpfc hba data structure.
 * @cq_event: pointer to the completion queue event to be freed.
 *
 * This routine is the lock version of the API invoked to release a
 * completion-queue event back into the free pool.
 **/
void
lpfc_sli4_cq_event_release(struct lpfc_hba *phba,
			   struct lpfc_cq_event *cq_event)
{
	unsigned long iflags;
	spin_lock_irqsave(&phba->hbalock, iflags);
	__lpfc_sli4_cq_event_release(phba, cq_event);
	spin_unlock_irqrestore(&phba->hbalock, iflags);
}

/**
 * lpfc_sli4_cq_event_release_all - Release all cq events to the free pool
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is to free all the pending completion-queue events to the
 * back into the free pool for device reset.
 **/
static void
lpfc_sli4_cq_event_release_all(struct lpfc_hba *phba)
{
	LIST_HEAD(cqelist);
	struct lpfc_cq_event *cqe;
	unsigned long iflags;

	/* Retrieve all the pending WCQEs from pending WCQE lists */
	spin_lock_irqsave(&phba->hbalock, iflags);
	/* Pending FCP XRI abort events */
	list_splice_init(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue,
			 &cqelist);
	/* Pending ELS XRI abort events */
	list_splice_init(&phba->sli4_hba.sp_els_xri_aborted_work_queue,
			 &cqelist);
	/* Pending asynnc events */
	list_splice_init(&phba->sli4_hba.sp_asynce_work_queue,
			 &cqelist);
	spin_unlock_irqrestore(&phba->hbalock, iflags);

	while (!list_empty(&cqelist)) {
		list_remove_head(&cqelist, cqe, struct lpfc_cq_event, list);
		lpfc_sli4_cq_event_release(phba, cqe);
	}
}

/**
 * lpfc_pci_function_reset - Reset pci function.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to request a PCI function reset. It will destroys
 * all resources assigned to the PCI function which originates this request.
 *
 * Return codes
 *      0 - sucessful
 *      ENOMEM - No availble memory
 *      EIO - The mailbox failed to complete successfully.
 **/
int
lpfc_pci_function_reset(struct lpfc_hba *phba)
{
	LPFC_MBOXQ_t *mboxq;
	uint32_t rc = 0;
	uint32_t shdr_status, shdr_add_status;
	union lpfc_sli4_cfg_shdr *shdr;

	mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
	if (!mboxq) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0494 Unable to allocate memory for issuing "
				"SLI_FUNCTION_RESET mailbox command\n");
		return -ENOMEM;
	}

	/* Set up PCI function reset SLI4_CONFIG mailbox-ioctl command */
	lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
			 LPFC_MBOX_OPCODE_FUNCTION_RESET, 0,
			 LPFC_SLI4_MBX_EMBED);
	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
	shdr = (union lpfc_sli4_cfg_shdr *)
		&mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
	if (rc != MBX_TIMEOUT)
		mempool_free(mboxq, phba->mbox_mem_pool);
	if (shdr_status || shdr_add_status || rc) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0495 SLI_FUNCTION_RESET mailbox failed with "
				"status x%x add_status x%x, mbx status x%x\n",
				shdr_status, shdr_add_status, rc);
		rc = -ENXIO;
	}
	return rc;
}

/**
 * lpfc_sli4_send_nop_mbox_cmds - Send sli-4 nop mailbox commands
 * @phba: pointer to lpfc hba data structure.
 * @cnt: number of nop mailbox commands to send.
 *
 * This routine is invoked to send a number @cnt of NOP mailbox command and
 * wait for each command to complete.
 *
 * Return: the number of NOP mailbox command completed.
 **/
static int
lpfc_sli4_send_nop_mbox_cmds(struct lpfc_hba *phba, uint32_t cnt)
{
	LPFC_MBOXQ_t *mboxq;
	int length, cmdsent;
	uint32_t mbox_tmo;
	uint32_t rc = 0;
	uint32_t shdr_status, shdr_add_status;
	union lpfc_sli4_cfg_shdr *shdr;

	if (cnt == 0) {
		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
				"2518 Requested to send 0 NOP mailbox cmd\n");
		return cnt;
	}

	mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
	if (!mboxq) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"2519 Unable to allocate memory for issuing "
				"NOP mailbox command\n");
		return 0;
	}

	/* Set up NOP SLI4_CONFIG mailbox-ioctl command */
	length = (sizeof(struct lpfc_mbx_nop) -
		  sizeof(struct lpfc_sli4_cfg_mhdr));
	lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
			 LPFC_MBOX_OPCODE_NOP, length, LPFC_SLI4_MBX_EMBED);

	mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
	for (cmdsent = 0; cmdsent < cnt; cmdsent++) {
		if (!phba->sli4_hba.intr_enable)
			rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
		else
			rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
		if (rc == MBX_TIMEOUT)
			break;
		/* Check return status */
		shdr = (union lpfc_sli4_cfg_shdr *)
			&mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
		shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
		shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
					 &shdr->response);
		if (shdr_status || shdr_add_status || rc) {
			lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
					"2520 NOP mailbox command failed "
					"status x%x add_status x%x mbx "
					"status x%x\n", shdr_status,
					shdr_add_status, rc);
			break;
		}
	}

	if (rc != MBX_TIMEOUT)
		mempool_free(mboxq, phba->mbox_mem_pool);

	return cmdsent;
}

/**
 * lpfc_sli4_fcfi_unreg - Unregister fcfi to device
 * @phba: pointer to lpfc hba data structure.
 * @fcfi: fcf index.
 *
 * This routine is invoked to unregister a FCFI from device.
 **/
void
lpfc_sli4_fcfi_unreg(struct lpfc_hba *phba, uint16_t fcfi)
{
	LPFC_MBOXQ_t *mbox;
	uint32_t mbox_tmo;
	int rc;
	unsigned long flags;

	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);

	if (!mbox)
		return;

	lpfc_unreg_fcfi(mbox, fcfi);

	if (!phba->sli4_hba.intr_enable)
		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
	else {
		mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
		rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
	}
	if (rc != MBX_TIMEOUT)
		mempool_free(mbox, phba->mbox_mem_pool);
	if (rc != MBX_SUCCESS)
		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
				"2517 Unregister FCFI command failed "
				"status %d, mbxStatus x%x\n", rc,
				bf_get(lpfc_mqe_status, &mbox->u.mqe));
	else {
		spin_lock_irqsave(&phba->hbalock, flags);
		/* Mark the FCFI is no longer registered */
		phba->fcf.fcf_flag &=
			~(FCF_AVAILABLE | FCF_REGISTERED | FCF_DISCOVERED);
		spin_unlock_irqrestore(&phba->hbalock, flags);
	}
}

/**
 * lpfc_sli4_pci_mem_setup - Setup SLI4 HBA PCI memory space.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to set up the PCI device memory space for device
 * with SLI-4 interface spec.
 *
 * Return codes
 * 	0 - sucessful
 * 	other values - error
 **/
static int
lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
{
	struct pci_dev *pdev;
	unsigned long bar0map_len, bar1map_len, bar2map_len;
	int error = -ENODEV;

	/* Obtain PCI device reference */
	if (!phba->pcidev)
		return error;
	else
		pdev = phba->pcidev;

	/* Set the device DMA mask size */
	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
		if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
			return error;

	/* Get the bus address of SLI4 device Bar0, Bar1, and Bar2 and the
	 * number of bytes required by each mapping. They are actually
	 * mapping to the PCI BAR regions 1, 2, and 4 by the SLI4 device.
	 */
	phba->pci_bar0_map = pci_resource_start(pdev, LPFC_SLI4_BAR0);
	bar0map_len = pci_resource_len(pdev, LPFC_SLI4_BAR0);

	phba->pci_bar1_map = pci_resource_start(pdev, LPFC_SLI4_BAR1);
	bar1map_len = pci_resource_len(pdev, LPFC_SLI4_BAR1);

	phba->pci_bar2_map = pci_resource_start(pdev, LPFC_SLI4_BAR2);
	bar2map_len = pci_resource_len(pdev, LPFC_SLI4_BAR2);

	/* Map SLI4 PCI Config Space Register base to a kernel virtual addr */
	phba->sli4_hba.conf_regs_memmap_p =
				ioremap(phba->pci_bar0_map, bar0map_len);
	if (!phba->sli4_hba.conf_regs_memmap_p) {
		dev_printk(KERN_ERR, &pdev->dev,
			   "ioremap failed for SLI4 PCI config registers.\n");
		goto out;
	}

	/* Map SLI4 HBA Control Register base to a kernel virtual address. */
	phba->sli4_hba.ctrl_regs_memmap_p =
				ioremap(phba->pci_bar1_map, bar1map_len);
	if (!phba->sli4_hba.ctrl_regs_memmap_p) {
		dev_printk(KERN_ERR, &pdev->dev,
			   "ioremap failed for SLI4 HBA control registers.\n");
		goto out_iounmap_conf;
	}

	/* Map SLI4 HBA Doorbell Register base to a kernel virtual address. */
	phba->sli4_hba.drbl_regs_memmap_p =
				ioremap(phba->pci_bar2_map, bar2map_len);
	if (!phba->sli4_hba.drbl_regs_memmap_p) {
		dev_printk(KERN_ERR, &pdev->dev,
			   "ioremap failed for SLI4 HBA doorbell registers.\n");
		goto out_iounmap_ctrl;
	}

	/* Set up BAR0 PCI config space register memory map */
	lpfc_sli4_bar0_register_memmap(phba);

	/* Set up BAR1 register memory map */
	lpfc_sli4_bar1_register_memmap(phba);

	/* Set up BAR2 register memory map */
	error = lpfc_sli4_bar2_register_memmap(phba, LPFC_VF0);
	if (error)
		goto out_iounmap_all;

	return 0;

out_iounmap_all:
	iounmap(phba->sli4_hba.drbl_regs_memmap_p);
out_iounmap_ctrl:
	iounmap(phba->sli4_hba.ctrl_regs_memmap_p);
out_iounmap_conf:
	iounmap(phba->sli4_hba.conf_regs_memmap_p);
out:
	return error;
}

/**
 * lpfc_sli4_pci_mem_unset - Unset SLI4 HBA PCI memory space.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to unset the PCI device memory space for device
 * with SLI-4 interface spec.
 **/
static void
lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba)
{
	struct pci_dev *pdev;

	/* Obtain PCI device reference */
	if (!phba->pcidev)
		return;
	else
		pdev = phba->pcidev;

	/* Free coherent DMA memory allocated */

	/* Unmap I/O memory space */
	iounmap(phba->sli4_hba.drbl_regs_memmap_p);
	iounmap(phba->sli4_hba.ctrl_regs_memmap_p);
	iounmap(phba->sli4_hba.conf_regs_memmap_p);

	return;
}

/**
 * lpfc_sli_enable_msix - Enable MSI-X interrupt mode on SLI-3 device
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to enable the MSI-X interrupt vectors to device
 * with SLI-3 interface specs. The kernel function pci_enable_msix() is
 * called to enable the MSI-X vectors. Note that pci_enable_msix(), once
 * invoked, enables either all or nothing, depending on the current
 * availability of PCI vector resources. The device driver is responsible
 * for calling the individual request_irq() to register each MSI-X vector
 * with a interrupt handler, which is done in this function. Note that
 * later when device is unloading, the driver should always call free_irq()
 * on all MSI-X vectors it has done request_irq() on before calling
 * pci_disable_msix(). Failure to do so results in a BUG_ON() and a device
 * will be left with MSI-X enabled and leaks its vectors.
 *
 * Return codes
 *   0 - sucessful
 *   other values - error
 **/
static int
lpfc_sli_enable_msix(struct lpfc_hba *phba)
{
	int rc, i;
	LPFC_MBOXQ_t *pmb;

	/* Set up MSI-X multi-message vectors */
	for (i = 0; i < LPFC_MSIX_VECTORS; i++)
		phba->msix_entries[i].entry = i;

	/* Configure MSI-X capability structure */
	rc = pci_enable_msix(phba->pcidev, phba->msix_entries,
				ARRAY_SIZE(phba->msix_entries));
	if (rc) {
		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
				"0420 PCI enable MSI-X failed (%d)\n", rc);
		goto msi_fail_out;
	}
	for (i = 0; i < LPFC_MSIX_VECTORS; i++)
		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
				"0477 MSI-X entry[%d]: vector=x%x "
				"message=%d\n", i,
				phba->msix_entries[i].vector,
				phba->msix_entries[i].entry);
	/*
	 * Assign MSI-X vectors to interrupt handlers
	 */

	/* vector-0 is associated to slow-path handler */
	rc = request_irq(phba->msix_entries[0].vector,
			 &lpfc_sli_sp_intr_handler, IRQF_SHARED,
			 LPFC_SP_DRIVER_HANDLER_NAME, phba);
	if (rc) {
		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
				"0421 MSI-X slow-path request_irq failed "
				"(%d)\n", rc);
		goto msi_fail_out;
	}

	/* vector-1 is associated to fast-path handler */
	rc = request_irq(phba->msix_entries[1].vector,
			 &lpfc_sli_fp_intr_handler, IRQF_SHARED,
			 LPFC_FP_DRIVER_HANDLER_NAME, phba);

	if (rc) {
		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
				"0429 MSI-X fast-path request_irq failed "
				"(%d)\n", rc);
		goto irq_fail_out;
	}

	/*
	 * Configure HBA MSI-X attention conditions to messages
	 */
	pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);

	if (!pmb) {
		rc = -ENOMEM;
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0474 Unable to allocate memory for issuing "
				"MBOX_CONFIG_MSI command\n");
		goto mem_fail_out;
	}
	rc = lpfc_config_msi(phba, pmb);
	if (rc)
		goto mbx_fail_out;
	rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
	if (rc != MBX_SUCCESS) {
		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
				"0351 Config MSI mailbox command failed, "
				"mbxCmd x%x, mbxStatus x%x\n",
				pmb->u.mb.mbxCommand, pmb->u.mb.mbxStatus);
		goto mbx_fail_out;
	}

	/* Free memory allocated for mailbox command */
	mempool_free(pmb, phba->mbox_mem_pool);
	return rc;

mbx_fail_out:
	/* Free memory allocated for mailbox command */
	mempool_free(pmb, phba->mbox_mem_pool);

mem_fail_out:
	/* free the irq already requested */
	free_irq(phba->msix_entries[1].vector, phba);

irq_fail_out:
	/* free the irq already requested */
	free_irq(phba->msix_entries[0].vector, phba);

msi_fail_out:
	/* Unconfigure MSI-X capability structure */
	pci_disable_msix(phba->pcidev);
	return rc;
}

/**
 * lpfc_sli_disable_msix - Disable MSI-X interrupt mode on SLI-3 device.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to release the MSI-X vectors and then disable the
 * MSI-X interrupt mode to device with SLI-3 interface spec.
 **/
static void
lpfc_sli_disable_msix(struct lpfc_hba *phba)
{
	int i;

	/* Free up MSI-X multi-message vectors */
	for (i = 0; i < LPFC_MSIX_VECTORS; i++)
		free_irq(phba->msix_entries[i].vector, phba);
	/* Disable MSI-X */
	pci_disable_msix(phba->pcidev);

	return;
}

/**
 * lpfc_sli_enable_msi - Enable MSI interrupt mode on SLI-3 device.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to enable the MSI interrupt mode to device with
 * SLI-3 interface spec. The kernel function pci_enable_msi() is called to
 * enable the MSI vector. The device driver is responsible for calling the
 * request_irq() to register MSI vector with a interrupt the handler, which
 * is done in this function.
 *
 * Return codes
 * 	0 - sucessful
 * 	other values - error
 */
static int
lpfc_sli_enable_msi(struct lpfc_hba *phba)
{
	int rc;

	rc = pci_enable_msi(phba->pcidev);
	if (!rc)
		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
				"0462 PCI enable MSI mode success.\n");
	else {
		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
				"0471 PCI enable MSI mode failed (%d)\n", rc);
		return rc;
	}

	rc = request_irq(phba->pcidev->irq, lpfc_sli_intr_handler,
			 IRQF_SHARED, LPFC_DRIVER_NAME, phba);
	if (rc) {
		pci_disable_msi(phba->pcidev);
		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
				"0478 MSI request_irq failed (%d)\n", rc);
	}
	return rc;
}

/**
 * lpfc_sli_disable_msi - Disable MSI interrupt mode to SLI-3 device.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to disable the MSI interrupt mode to device with
 * SLI-3 interface spec. The driver calls free_irq() on MSI vector it has
 * done request_irq() on before calling pci_disable_msi(). Failure to do so
 * results in a BUG_ON() and a device will be left with MSI enabled and leaks
 * its vector.
 */
static void
lpfc_sli_disable_msi(struct lpfc_hba *phba)
{
	free_irq(phba->pcidev->irq, phba);
	pci_disable_msi(phba->pcidev);
	return;
}

/**
 * lpfc_sli_enable_intr - Enable device interrupt to SLI-3 device.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to enable device interrupt and associate driver's
 * interrupt handler(s) to interrupt vector(s) to device with SLI-3 interface
 * spec. Depends on the interrupt mode configured to the driver, the driver
 * will try to fallback from the configured interrupt mode to an interrupt
 * mode which is supported by the platform, kernel, and device in the order
 * of:
 * MSI-X -> MSI -> IRQ.
 *
 * Return codes
 *   0 - sucessful
 *   other values - error
 **/
static uint32_t
lpfc_sli_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
{
	uint32_t intr_mode = LPFC_INTR_ERROR;
	int retval;

	if (cfg_mode == 2) {
		/* Need to issue conf_port mbox cmd before conf_msi mbox cmd */
		retval = lpfc_sli_config_port(phba, LPFC_SLI_REV3);
		if (!retval) {
			/* Now, try to enable MSI-X interrupt mode */
			retval = lpfc_sli_enable_msix(phba);
			if (!retval) {
				/* Indicate initialization to MSI-X mode */
				phba->intr_type = MSIX;
				intr_mode = 2;
			}
		}
	}

	/* Fallback to MSI if MSI-X initialization failed */
	if (cfg_mode >= 1 && phba->intr_type == NONE) {
		retval = lpfc_sli_enable_msi(phba);
		if (!retval) {
			/* Indicate initialization to MSI mode */
			phba->intr_type = MSI;
			intr_mode = 1;
		}
	}

	/* Fallback to INTx if both MSI-X/MSI initalization failed */
	if (phba->intr_type == NONE) {
		retval = request_irq(phba->pcidev->irq, lpfc_sli_intr_handler,
				     IRQF_SHARED, LPFC_DRIVER_NAME, phba);
		if (!retval) {
			/* Indicate initialization to INTx mode */
			phba->intr_type = INTx;
			intr_mode = 0;
		}
	}
	return intr_mode;
}

/**
 * lpfc_sli_disable_intr - Disable device interrupt to SLI-3 device.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to disable device interrupt and disassociate the
 * driver's interrupt handler(s) from interrupt vector(s) to device with
 * SLI-3 interface spec. Depending on the interrupt mode, the driver will
 * release the interrupt vector(s) for the message signaled interrupt.
 **/
static void
lpfc_sli_disable_intr(struct lpfc_hba *phba)
{
	/* Disable the currently initialized interrupt mode */
	if (phba->intr_type == MSIX)
		lpfc_sli_disable_msix(phba);
	else if (phba->intr_type == MSI)
		lpfc_sli_disable_msi(phba);
	else if (phba->intr_type == INTx)
		free_irq(phba->pcidev->irq, phba);

	/* Reset interrupt management states */
	phba->intr_type = NONE;
	phba->sli.slistat.sli_intr = 0;

	return;
}

/**
 * lpfc_sli4_enable_msix - Enable MSI-X interrupt mode to SLI-4 device
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to enable the MSI-X interrupt vectors to device
 * with SLI-4 interface spec. The kernel function pci_enable_msix() is called
 * to enable the MSI-X vectors. Note that pci_enable_msix(), once invoked,
 * enables either all or nothing, depending on the current availability of
 * PCI vector resources. The device driver is responsible for calling the
 * individual request_irq() to register each MSI-X vector with a interrupt
 * handler, which is done in this function. Note that later when device is
 * unloading, the driver should always call free_irq() on all MSI-X vectors
 * it has done request_irq() on before calling pci_disable_msix(). Failure
 * to do so results in a BUG_ON() and a device will be left with MSI-X
 * enabled and leaks its vectors.
 *
 * Return codes
 * 0 - sucessful
 * other values - error
 **/
static int
lpfc_sli4_enable_msix(struct lpfc_hba *phba)
{
	int rc, index;

	/* Set up MSI-X multi-message vectors */
	for (index = 0; index < phba->sli4_hba.cfg_eqn; index++)
		phba->sli4_hba.msix_entries[index].entry = index;

	/* Configure MSI-X capability structure */
	rc = pci_enable_msix(phba->pcidev, phba->sli4_hba.msix_entries,
			     phba->sli4_hba.cfg_eqn);
	if (rc) {
		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
				"0484 PCI enable MSI-X failed (%d)\n", rc);
		goto msi_fail_out;
	}
	/* Log MSI-X vector assignment */
	for (index = 0; index < phba->sli4_hba.cfg_eqn; index++)
		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
				"0489 MSI-X entry[%d]: vector=x%x "
				"message=%d\n", index,
				phba->sli4_hba.msix_entries[index].vector,
				phba->sli4_hba.msix_entries[index].entry);
	/*
	 * Assign MSI-X vectors to interrupt handlers
	 */

	/* The first vector must associated to slow-path handler for MQ */
	rc = request_irq(phba->sli4_hba.msix_entries[0].vector,
			 &lpfc_sli4_sp_intr_handler, IRQF_SHARED,
			 LPFC_SP_DRIVER_HANDLER_NAME, phba);
	if (rc) {
		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
				"0485 MSI-X slow-path request_irq failed "
				"(%d)\n", rc);
		goto msi_fail_out;
	}

	/* The rest of the vector(s) are associated to fast-path handler(s) */
	for (index = 1; index < phba->sli4_hba.cfg_eqn; index++) {
		phba->sli4_hba.fcp_eq_hdl[index - 1].idx = index - 1;
		phba->sli4_hba.fcp_eq_hdl[index - 1].phba = phba;
		rc = request_irq(phba->sli4_hba.msix_entries[index].vector,
				 &lpfc_sli4_fp_intr_handler, IRQF_SHARED,
				 LPFC_FP_DRIVER_HANDLER_NAME,
				 &phba->sli4_hba.fcp_eq_hdl[index - 1]);
		if (rc) {
			lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
					"0486 MSI-X fast-path (%d) "
					"request_irq failed (%d)\n", index, rc);
			goto cfg_fail_out;
		}
	}

	return rc;

cfg_fail_out:
	/* free the irq already requested */
	for (--index; index >= 1; index--)
		free_irq(phba->sli4_hba.msix_entries[index - 1].vector,
			 &phba->sli4_hba.fcp_eq_hdl[index - 1]);

	/* free the irq already requested */
	free_irq(phba->sli4_hba.msix_entries[0].vector, phba);

msi_fail_out:
	/* Unconfigure MSI-X capability structure */
	pci_disable_msix(phba->pcidev);
	return rc;
}

/**
 * lpfc_sli4_disable_msix - Disable MSI-X interrupt mode to SLI-4 device
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to release the MSI-X vectors and then disable the
 * MSI-X interrupt mode to device with SLI-4 interface spec.
 **/
static void
lpfc_sli4_disable_msix(struct lpfc_hba *phba)
{
	int index;

	/* Free up MSI-X multi-message vectors */
	free_irq(phba->sli4_hba.msix_entries[0].vector, phba);

	for (index = 1; index < phba->sli4_hba.cfg_eqn; index++)
		free_irq(phba->sli4_hba.msix_entries[index].vector,
			 &phba->sli4_hba.fcp_eq_hdl[index - 1]);
	/* Disable MSI-X */
	pci_disable_msix(phba->pcidev);

	return;
}

/**
 * lpfc_sli4_enable_msi - Enable MSI interrupt mode to SLI-4 device
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to enable the MSI interrupt mode to device with
 * SLI-4 interface spec. The kernel function pci_enable_msi() is called
 * to enable the MSI vector. The device driver is responsible for calling
 * the request_irq() to register MSI vector with a interrupt the handler,
 * which is done in this function.
 *
 * Return codes
 * 	0 - sucessful
 * 	other values - error
 **/
static int
lpfc_sli4_enable_msi(struct lpfc_hba *phba)
{
	int rc, index;

	rc = pci_enable_msi(phba->pcidev);
	if (!rc)
		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
				"0487 PCI enable MSI mode success.\n");
	else {
		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
				"0488 PCI enable MSI mode failed (%d)\n", rc);
		return rc;
	}

	rc = request_irq(phba->pcidev->irq, lpfc_sli4_intr_handler,
			 IRQF_SHARED, LPFC_DRIVER_NAME, phba);
	if (rc) {
		pci_disable_msi(phba->pcidev);
		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
				"0490 MSI request_irq failed (%d)\n", rc);
	}

	for (index = 0; index < phba->cfg_fcp_eq_count; index++) {
		phba->sli4_hba.fcp_eq_hdl[index].idx = index;
		phba->sli4_hba.fcp_eq_hdl[index].phba = phba;
	}

	return rc;
}

/**
 * lpfc_sli4_disable_msi - Disable MSI interrupt mode to SLI-4 device
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to disable the MSI interrupt mode to device with
 * SLI-4 interface spec. The driver calls free_irq() on MSI vector it has
 * done request_irq() on before calling pci_disable_msi(). Failure to do so
 * results in a BUG_ON() and a device will be left with MSI enabled and leaks
 * its vector.
 **/
static void
lpfc_sli4_disable_msi(struct lpfc_hba *phba)
{
	free_irq(phba->pcidev->irq, phba);
	pci_disable_msi(phba->pcidev);
	return;
}

/**
 * lpfc_sli4_enable_intr - Enable device interrupt to SLI-4 device
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to enable device interrupt and associate driver's
 * interrupt handler(s) to interrupt vector(s) to device with SLI-4
 * interface spec. Depends on the interrupt mode configured to the driver,
 * the driver will try to fallback from the configured interrupt mode to an
 * interrupt mode which is supported by the platform, kernel, and device in
 * the order of:
 * MSI-X -> MSI -> IRQ.
 *
 * Return codes
 * 	0 - sucessful
 * 	other values - error
 **/
static uint32_t
lpfc_sli4_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
{
	uint32_t intr_mode = LPFC_INTR_ERROR;
	int retval, index;

	if (cfg_mode == 2) {
		/* Preparation before conf_msi mbox cmd */
		retval = 0;
		if (!retval) {
			/* Now, try to enable MSI-X interrupt mode */
			retval = lpfc_sli4_enable_msix(phba);
			if (!retval) {
				/* Indicate initialization to MSI-X mode */
				phba->intr_type = MSIX;
				intr_mode = 2;
			}
		}
	}

	/* Fallback to MSI if MSI-X initialization failed */
	if (cfg_mode >= 1 && phba->intr_type == NONE) {
		retval = lpfc_sli4_enable_msi(phba);
		if (!retval) {
			/* Indicate initialization to MSI mode */
			phba->intr_type = MSI;
			intr_mode = 1;
		}
	}

	/* Fallback to INTx if both MSI-X/MSI initalization failed */
	if (phba->intr_type == NONE) {
		retval = request_irq(phba->pcidev->irq, lpfc_sli4_intr_handler,
				     IRQF_SHARED, LPFC_DRIVER_NAME, phba);
		if (!retval) {
			/* Indicate initialization to INTx mode */
			phba->intr_type = INTx;
			intr_mode = 0;
			for (index = 0; index < phba->cfg_fcp_eq_count;
			     index++) {
				phba->sli4_hba.fcp_eq_hdl[index].idx = index;
				phba->sli4_hba.fcp_eq_hdl[index].phba = phba;
			}
		}
	}
	return intr_mode;
}

/**
 * lpfc_sli4_disable_intr - Disable device interrupt to SLI-4 device
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to disable device interrupt and disassociate
 * the driver's interrupt handler(s) from interrupt vector(s) to device
 * with SLI-4 interface spec. Depending on the interrupt mode, the driver
 * will release the interrupt vector(s) for the message signaled interrupt.
 **/
static void
lpfc_sli4_disable_intr(struct lpfc_hba *phba)
{
	/* Disable the currently initialized interrupt mode */
	if (phba->intr_type == MSIX)
		lpfc_sli4_disable_msix(phba);
	else if (phba->intr_type == MSI)
		lpfc_sli4_disable_msi(phba);
	else if (phba->intr_type == INTx)
		free_irq(phba->pcidev->irq, phba);

	/* Reset interrupt management states */
	phba->intr_type = NONE;
	phba->sli.slistat.sli_intr = 0;

	return;
}

/**
 * lpfc_unset_hba - Unset SLI3 hba device initialization
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to unset the HBA device initialization steps to
 * a device with SLI-3 interface spec.
 **/
static void
lpfc_unset_hba(struct lpfc_hba *phba)
{
	struct lpfc_vport *vport = phba->pport;
	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);

	spin_lock_irq(shost->host_lock);
	vport->load_flag |= FC_UNLOADING;
	spin_unlock_irq(shost->host_lock);

	lpfc_stop_hba_timers(phba);

	phba->pport->work_port_events = 0;

	lpfc_sli_hba_down(phba);

	lpfc_sli_brdrestart(phba);

	lpfc_sli_disable_intr(phba);

	return;
}

/**
 * lpfc_sli4_unset_hba - Unset SLI4 hba device initialization.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to unset the HBA device initialization steps to
 * a device with SLI-4 interface spec.
 **/
static void
lpfc_sli4_unset_hba(struct lpfc_hba *phba)
{
	struct lpfc_vport *vport = phba->pport;
	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);

	spin_lock_irq(shost->host_lock);
	vport->load_flag |= FC_UNLOADING;
	spin_unlock_irq(shost->host_lock);

	phba->pport->work_port_events = 0;

	lpfc_sli4_hba_down(phba);

	lpfc_sli4_disable_intr(phba);

	return;
}

/**
 * lpfc_sli4_hba_unset - Unset the fcoe hba
 * @phba: Pointer to HBA context object.
 *
 * This function is called in the SLI4 code path to reset the HBA's FCoE
 * function. The caller is not required to hold any lock. This routine
 * issues PCI function reset mailbox command to reset the FCoE function.
 * At the end of the function, it calls lpfc_hba_down_post function to
 * free any pending commands.
 **/
static void
lpfc_sli4_hba_unset(struct lpfc_hba *phba)
{
	int wait_cnt = 0;
	LPFC_MBOXQ_t *mboxq;

	lpfc_stop_hba_timers(phba);
	phba->sli4_hba.intr_enable = 0;

	/*
	 * Gracefully wait out the potential current outstanding asynchronous
	 * mailbox command.
	 */

	/* First, block any pending async mailbox command from posted */
	spin_lock_irq(&phba->hbalock);
	phba->sli.sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
	spin_unlock_irq(&phba->hbalock);
	/* Now, trying to wait it out if we can */
	while (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) {
		msleep(10);
		if (++wait_cnt > LPFC_ACTIVE_MBOX_WAIT_CNT)
			break;
	}
	/* Forcefully release the outstanding mailbox command if timed out */
	if (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) {
		spin_lock_irq(&phba->hbalock);
		mboxq = phba->sli.mbox_active;
		mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED;
		__lpfc_mbox_cmpl_put(phba, mboxq);
		phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
		phba->sli.mbox_active = NULL;
		spin_unlock_irq(&phba->hbalock);
	}

	/* Tear down the queues in the HBA */
	lpfc_sli4_queue_unset(phba);

	/* Disable PCI subsystem interrupt */
	lpfc_sli4_disable_intr(phba);

	/* Stop kthread signal shall trigger work_done one more time */
	kthread_stop(phba->worker_thread);

	/* Stop the SLI4 device port */
	phba->pport->work_port_events = 0;
}

/**
 * lpfc_pci_probe_one_s3 - PCI probe func to reg SLI-3 device to PCI subsystem.
 * @pdev: pointer to PCI device
 * @pid: pointer to PCI device identifier
 *
 * This routine is to be called to attach a device with SLI-3 interface spec
 * to the PCI subsystem. When an Emulex HBA with SLI-3 interface spec is
 * presented on PCI bus, the kernel PCI subsystem looks at PCI device-specific
 * information of the device and driver to see if the driver state that it can
 * support this kind of device. If the match is successful, the driver core
 * invokes this routine. If this routine determines it can claim the HBA, it
 * does all the initialization that it needs to do to handle the HBA properly.
 *
 * Return code
 * 	0 - driver can claim the device
 * 	negative value - driver can not claim the device
 **/
static int __devinit
lpfc_pci_probe_one_s3(struct pci_dev *pdev, const struct pci_device_id *pid)
{
	struct lpfc_hba   *phba;
	struct lpfc_vport *vport = NULL;
	int error;
	uint32_t cfg_mode, intr_mode;

	/* Allocate memory for HBA structure */
	phba = lpfc_hba_alloc(pdev);
	if (!phba)
		return -ENOMEM;

	/* Perform generic PCI device enabling operation */
	error = lpfc_enable_pci_dev(phba);
	if (error) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1401 Failed to enable pci device.\n");
		goto out_free_phba;
	}

	/* Set up SLI API function jump table for PCI-device group-0 HBAs */
	error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_LP);
	if (error)
		goto out_disable_pci_dev;

	/* Set up SLI-3 specific device PCI memory space */
	error = lpfc_sli_pci_mem_setup(phba);
	if (error) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1402 Failed to set up pci memory space.\n");
		goto out_disable_pci_dev;
	}

	/* Set up phase-1 common device driver resources */
	error = lpfc_setup_driver_resource_phase1(phba);
	if (error) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1403 Failed to set up driver resource.\n");
		goto out_unset_pci_mem_s3;
	}

	/* Set up SLI-3 specific device driver resources */
	error = lpfc_sli_driver_resource_setup(phba);
	if (error) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1404 Failed to set up driver resource.\n");
		goto out_unset_pci_mem_s3;
	}

	/* Initialize and populate the iocb list per host */
	error = lpfc_init_iocb_list(phba, LPFC_IOCB_LIST_CNT);
	if (error) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1405 Failed to initialize iocb list.\n");
		goto out_unset_driver_resource_s3;
	}

	/* Set up common device driver resources */
	error = lpfc_setup_driver_resource_phase2(phba);
	if (error) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1406 Failed to set up driver resource.\n");
		goto out_free_iocb_list;
	}

	/* Create SCSI host to the physical port */
	error = lpfc_create_shost(phba);
	if (error) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1407 Failed to create scsi host.\n");
		goto out_unset_driver_resource;
	}

	/* Configure sysfs attributes */
	vport = phba->pport;
	error = lpfc_alloc_sysfs_attr(vport);
	if (error) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1476 Failed to allocate sysfs attr\n");
		goto out_destroy_shost;
	}

	/* Now, trying to enable interrupt and bring up the device */
	cfg_mode = phba->cfg_use_msi;
	while (true) {
		/* Put device to a known state before enabling interrupt */
		lpfc_stop_port(phba);
		/* Configure and enable interrupt */
		intr_mode = lpfc_sli_enable_intr(phba, cfg_mode);
		if (intr_mode == LPFC_INTR_ERROR) {
			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
					"0431 Failed to enable interrupt.\n");
			error = -ENODEV;
			goto out_free_sysfs_attr;
		}
		/* SLI-3 HBA setup */
		if (lpfc_sli_hba_setup(phba)) {
			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
					"1477 Failed to set up hba\n");
			error = -ENODEV;
			goto out_remove_device;
		}

		/* Wait 50ms for the interrupts of previous mailbox commands */
		msleep(50);
		/* Check active interrupts on message signaled interrupts */
		if (intr_mode == 0 ||
		    phba->sli.slistat.sli_intr > LPFC_MSIX_VECTORS) {
			/* Log the current active interrupt mode */
			phba->intr_mode = intr_mode;
			lpfc_log_intr_mode(phba, intr_mode);
			break;
		} else {
			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
					"0447 Configure interrupt mode (%d) "
					"failed active interrupt test.\n",
					intr_mode);
			/* Disable the current interrupt mode */
			lpfc_sli_disable_intr(phba);
			/* Try next level of interrupt mode */
			cfg_mode = --intr_mode;
		}
	}

	/* Perform post initialization setup */
	lpfc_post_init_setup(phba);

	/* Check if there are static vports to be created. */
	lpfc_create_static_vport(phba);

	return 0;

out_remove_device:
	lpfc_unset_hba(phba);
out_free_sysfs_attr:
	lpfc_free_sysfs_attr(vport);
out_destroy_shost:
	lpfc_destroy_shost(phba);
out_unset_driver_resource:
	lpfc_unset_driver_resource_phase2(phba);
out_free_iocb_list:
	lpfc_free_iocb_list(phba);
out_unset_driver_resource_s3:
	lpfc_sli_driver_resource_unset(phba);
out_unset_pci_mem_s3:
	lpfc_sli_pci_mem_unset(phba);
out_disable_pci_dev:
	lpfc_disable_pci_dev(phba);
out_free_phba:
	lpfc_hba_free(phba);
	return error;
}

/**
 * lpfc_pci_remove_one_s3 - PCI func to unreg SLI-3 device from PCI subsystem.
 * @pdev: pointer to PCI device
 *
 * This routine is to be called to disattach a device with SLI-3 interface
 * spec from PCI subsystem. When an Emulex HBA with SLI-3 interface spec is
 * removed from PCI bus, it performs all the necessary cleanup for the HBA
 * device to be removed from the PCI subsystem properly.
 **/
static void __devexit
lpfc_pci_remove_one_s3(struct pci_dev *pdev)
{
	struct Scsi_Host  *shost = pci_get_drvdata(pdev);
	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
	struct lpfc_vport **vports;
	struct lpfc_hba   *phba = vport->phba;
	int i;
	int bars = pci_select_bars(pdev, IORESOURCE_MEM);

	spin_lock_irq(&phba->hbalock);
	vport->load_flag |= FC_UNLOADING;
	spin_unlock_irq(&phba->hbalock);

	lpfc_free_sysfs_attr(vport);

	/* Release all the vports against this physical port */
	vports = lpfc_create_vport_work_array(phba);
	if (vports != NULL)
		for (i = 1; i <= phba->max_vports && vports[i] != NULL; i++)
			fc_vport_terminate(vports[i]->fc_vport);
	lpfc_destroy_vport_work_array(phba, vports);

	/* Remove FC host and then SCSI host with the physical port */
	fc_remove_host(shost);
	scsi_remove_host(shost);
	lpfc_cleanup(vport);

	/*
	 * Bring down the SLI Layer. This step disable all interrupts,
	 * clears the rings, discards all mailbox commands, and resets
	 * the HBA.
	 */

	/* HBA interrupt will be diabled after this call */
	lpfc_sli_hba_down(phba);
	/* Stop kthread signal shall trigger work_done one more time */
	kthread_stop(phba->worker_thread);
	/* Final cleanup of txcmplq and reset the HBA */
	lpfc_sli_brdrestart(phba);

	lpfc_stop_hba_timers(phba);
	spin_lock_irq(&phba->hbalock);
	list_del_init(&vport->listentry);
	spin_unlock_irq(&phba->hbalock);

	lpfc_debugfs_terminate(vport);

	/* Disable interrupt */
	lpfc_sli_disable_intr(phba);

	pci_set_drvdata(pdev, NULL);
	scsi_host_put(shost);

	/*
	 * Call scsi_free before mem_free since scsi bufs are released to their
	 * corresponding pools here.
	 */
	lpfc_scsi_free(phba);
	lpfc_mem_free_all(phba);

	dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
			  phba->hbqslimp.virt, phba->hbqslimp.phys);

	/* Free resources associated with SLI2 interface */
	dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
			  phba->slim2p.virt, phba->slim2p.phys);

	/* unmap adapter SLIM and Control Registers */
	iounmap(phba->ctrl_regs_memmap_p);
	iounmap(phba->slim_memmap_p);

	lpfc_hba_free(phba);

	pci_release_selected_regions(pdev, bars);
	pci_disable_device(pdev);
}

/**
 * lpfc_pci_suspend_one_s3 - PCI func to suspend SLI-3 device for power mgmnt
 * @pdev: pointer to PCI device
 * @msg: power management message
 *
 * This routine is to be called from the kernel's PCI subsystem to support
 * system Power Management (PM) to device with SLI-3 interface spec. When
 * PM invokes this method, it quiesces the device by stopping the driver's
 * worker thread for the device, turning off device's interrupt and DMA,
 * and bring the device offline. Note that as the driver implements the
 * minimum PM requirements to a power-aware driver's PM support for the
 * suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE, FREEZE)
 * to the suspend() method call will be treated as SUSPEND and the driver will
 * fully reinitialize its device during resume() method call, the driver will
 * set device to PCI_D3hot state in PCI config space instead of setting it
 * according to the @msg provided by the PM.
 *
 * Return code
 * 	0 - driver suspended the device
 * 	Error otherwise
 **/
static int
lpfc_pci_suspend_one_s3(struct pci_dev *pdev, pm_message_t msg)
{
	struct Scsi_Host *shost = pci_get_drvdata(pdev);
	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;

	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
			"0473 PCI device Power Management suspend.\n");

	/* Bring down the device */
	lpfc_offline_prep(phba);
	lpfc_offline(phba);
	kthread_stop(phba->worker_thread);

	/* Disable interrupt from device */
	lpfc_sli_disable_intr(phba);

	/* Save device state to PCI config space */
	pci_save_state(pdev);
	pci_set_power_state(pdev, PCI_D3hot);

	return 0;
}

/**
 * lpfc_pci_resume_one_s3 - PCI func to resume SLI-3 device for power mgmnt
 * @pdev: pointer to PCI device
 *
 * This routine is to be called from the kernel's PCI subsystem to support
 * system Power Management (PM) to device with SLI-3 interface spec. When PM
 * invokes this method, it restores the device's PCI config space state and
 * fully reinitializes the device and brings it online. Note that as the
 * driver implements the minimum PM requirements to a power-aware driver's
 * PM for suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE,
 * FREEZE) to the suspend() method call will be treated as SUSPEND and the
 * driver will fully reinitialize its device during resume() method call,
 * the device will be set to PCI_D0 directly in PCI config space before
 * restoring the state.
 *
 * Return code
 * 	0 - driver suspended the device
 * 	Error otherwise
 **/
static int
lpfc_pci_resume_one_s3(struct pci_dev *pdev)
{
	struct Scsi_Host *shost = pci_get_drvdata(pdev);
	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
	uint32_t intr_mode;
	int error;

	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
			"0452 PCI device Power Management resume.\n");

	/* Restore device state from PCI config space */
	pci_set_power_state(pdev, PCI_D0);
	pci_restore_state(pdev);
	if (pdev->is_busmaster)
		pci_set_master(pdev);

	/* Startup the kernel thread for this host adapter. */
	phba->worker_thread = kthread_run(lpfc_do_work, phba,
					"lpfc_worker_%d", phba->brd_no);
	if (IS_ERR(phba->worker_thread)) {
		error = PTR_ERR(phba->worker_thread);
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0434 PM resume failed to start worker "
				"thread: error=x%x.\n", error);
		return error;
	}

	/* Configure and enable interrupt */
	intr_mode = lpfc_sli_enable_intr(phba, phba->intr_mode);
	if (intr_mode == LPFC_INTR_ERROR) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0430 PM resume Failed to enable interrupt\n");
		return -EIO;
	} else
		phba->intr_mode = intr_mode;

	/* Restart HBA and bring it online */
	lpfc_sli_brdrestart(phba);
	lpfc_online(phba);

	/* Log the current active interrupt mode */
	lpfc_log_intr_mode(phba, phba->intr_mode);

	return 0;
}

/**
 * lpfc_io_error_detected_s3 - Method for handling SLI-3 device PCI I/O error
 * @pdev: pointer to PCI device.
 * @state: the current PCI connection state.
 *
 * This routine is called from the PCI subsystem for I/O error handling to
 * device with SLI-3 interface spec. This function is called by the PCI
 * subsystem after a PCI bus error affecting this device has been detected.
 * When this function is invoked, it will need to stop all the I/Os and
 * interrupt(s) to the device. Once that is done, it will return
 * PCI_ERS_RESULT_NEED_RESET for the PCI subsystem to perform proper recovery
 * as desired.
 *
 * Return codes
 * 	PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
 * 	PCI_ERS_RESULT_DISCONNECT - device could not be recovered
 **/
static pci_ers_result_t
lpfc_io_error_detected_s3(struct pci_dev *pdev, pci_channel_state_t state)
{
	struct Scsi_Host *shost = pci_get_drvdata(pdev);
	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
	struct lpfc_sli *psli = &phba->sli;
	struct lpfc_sli_ring  *pring;

	if (state == pci_channel_io_perm_failure) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0472 PCI channel I/O permanent failure\n");
		/* Block all SCSI devices' I/Os on the host */
		lpfc_scsi_dev_block(phba);
		/* Clean up all driver's outstanding SCSI I/Os */
		lpfc_sli_flush_fcp_rings(phba);
		return PCI_ERS_RESULT_DISCONNECT;
	}

	pci_disable_device(pdev);
	/*
	 * There may be I/Os dropped by the firmware.
	 * Error iocb (I/O) on txcmplq and let the SCSI layer
	 * retry it after re-establishing link.
	 */
	pring = &psli->ring[psli->fcp_ring];
	lpfc_sli_abort_iocb_ring(phba, pring);

	/* Disable interrupt */
	lpfc_sli_disable_intr(phba);

	/* Request a slot reset. */
	return PCI_ERS_RESULT_NEED_RESET;
}

/**
 * lpfc_io_slot_reset_s3 - Method for restarting PCI SLI-3 device from scratch.
 * @pdev: pointer to PCI device.
 *
 * This routine is called from the PCI subsystem for error handling to
 * device with SLI-3 interface spec. This is called after PCI bus has been
 * reset to restart the PCI card from scratch, as if from a cold-boot.
 * During the PCI subsystem error recovery, after driver returns
 * PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform proper error
 * recovery and then call this routine before calling the .resume method
 * to recover the device. This function will initialize the HBA device,
 * enable the interrupt, but it will just put the HBA to offline state
 * without passing any I/O traffic.
 *
 * Return codes
 * 	PCI_ERS_RESULT_RECOVERED - the device has been recovered
 * 	PCI_ERS_RESULT_DISCONNECT - device could not be recovered
 */
static pci_ers_result_t
lpfc_io_slot_reset_s3(struct pci_dev *pdev)
{
	struct Scsi_Host *shost = pci_get_drvdata(pdev);
	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
	struct lpfc_sli *psli = &phba->sli;
	uint32_t intr_mode;

	dev_printk(KERN_INFO, &pdev->dev, "recovering from a slot reset.\n");
	if (pci_enable_device_mem(pdev)) {
		printk(KERN_ERR "lpfc: Cannot re-enable "
			"PCI device after reset.\n");
		return PCI_ERS_RESULT_DISCONNECT;
	}

	pci_restore_state(pdev);
	if (pdev->is_busmaster)
		pci_set_master(pdev);

	spin_lock_irq(&phba->hbalock);
	psli->sli_flag &= ~LPFC_SLI_ACTIVE;
	spin_unlock_irq(&phba->hbalock);

	/* Configure and enable interrupt */
	intr_mode = lpfc_sli_enable_intr(phba, phba->intr_mode);
	if (intr_mode == LPFC_INTR_ERROR) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0427 Cannot re-enable interrupt after "
				"slot reset.\n");
		return PCI_ERS_RESULT_DISCONNECT;
	} else
		phba->intr_mode = intr_mode;

	/* Take device offline; this will perform cleanup */
	lpfc_offline(phba);
	lpfc_sli_brdrestart(phba);

	/* Log the current active interrupt mode */
	lpfc_log_intr_mode(phba, phba->intr_mode);

	return PCI_ERS_RESULT_RECOVERED;
}

/**
 * lpfc_io_resume_s3 - Method for resuming PCI I/O operation on SLI-3 device.
 * @pdev: pointer to PCI device
 *
 * This routine is called from the PCI subsystem for error handling to device
 * with SLI-3 interface spec. It is called when kernel error recovery tells
 * the lpfc driver that it is ok to resume normal PCI operation after PCI bus
 * error recovery. After this call, traffic can start to flow from this device
 * again.
 */
static void
lpfc_io_resume_s3(struct pci_dev *pdev)
{
	struct Scsi_Host *shost = pci_get_drvdata(pdev);
	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;

	lpfc_online(phba);
}

/**
 * lpfc_sli4_get_els_iocb_cnt - Calculate the # of ELS IOCBs to reserve
 * @phba: pointer to lpfc hba data structure.
 *
 * returns the number of ELS/CT IOCBs to reserve
 **/
int
lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *phba)
{
	int max_xri = phba->sli4_hba.max_cfg_param.max_xri;

	if (phba->sli_rev == LPFC_SLI_REV4) {
		if (max_xri <= 100)
			return 4;
		else if (max_xri <= 256)
			return 8;
		else if (max_xri <= 512)
			return 16;
		else if (max_xri <= 1024)
			return 32;
		else
			return 48;
	} else
		return 0;
}

/**
 * lpfc_pci_probe_one_s4 - PCI probe func to reg SLI-4 device to PCI subsys
 * @pdev: pointer to PCI device
 * @pid: pointer to PCI device identifier
 *
 * This routine is called from the kernel's PCI subsystem to device with
 * SLI-4 interface spec. When an Emulex HBA with SLI-4 interface spec is
 * presented on PCI bus, the kernel PCI subsystem looks at PCI device-specific
 * information of the device and driver to see if the driver state that it
 * can support this kind of device. If the match is successful, the driver
 * core invokes this routine. If this routine determines it can claim the HBA,
 * it does all the initialization that it needs to do to handle the HBA
 * properly.
 *
 * Return code
 * 	0 - driver can claim the device
 * 	negative value - driver can not claim the device
 **/
static int __devinit
lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
{
	struct lpfc_hba   *phba;
	struct lpfc_vport *vport = NULL;
	int error;
	uint32_t cfg_mode, intr_mode;
	int mcnt;

	/* Allocate memory for HBA structure */
	phba = lpfc_hba_alloc(pdev);
	if (!phba)
		return -ENOMEM;

	/* Perform generic PCI device enabling operation */
	error = lpfc_enable_pci_dev(phba);
	if (error) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1409 Failed to enable pci device.\n");
		goto out_free_phba;
	}

	/* Set up SLI API function jump table for PCI-device group-1 HBAs */
	error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_OC);
	if (error)
		goto out_disable_pci_dev;

	/* Set up SLI-4 specific device PCI memory space */
	error = lpfc_sli4_pci_mem_setup(phba);
	if (error) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1410 Failed to set up pci memory space.\n");
		goto out_disable_pci_dev;
	}

	/* Set up phase-1 common device driver resources */
	error = lpfc_setup_driver_resource_phase1(phba);
	if (error) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1411 Failed to set up driver resource.\n");
		goto out_unset_pci_mem_s4;
	}

	/* Set up SLI-4 Specific device driver resources */
	error = lpfc_sli4_driver_resource_setup(phba);
	if (error) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1412 Failed to set up driver resource.\n");
		goto out_unset_pci_mem_s4;
	}

	/* Initialize and populate the iocb list per host */
	error = lpfc_init_iocb_list(phba,
			phba->sli4_hba.max_cfg_param.max_xri);
	if (error) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1413 Failed to initialize iocb list.\n");
		goto out_unset_driver_resource_s4;
	}

	/* Set up common device driver resources */
	error = lpfc_setup_driver_resource_phase2(phba);
	if (error) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1414 Failed to set up driver resource.\n");
		goto out_free_iocb_list;
	}

	/* Create SCSI host to the physical port */
	error = lpfc_create_shost(phba);
	if (error) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1415 Failed to create scsi host.\n");
		goto out_unset_driver_resource;
	}

	/* Configure sysfs attributes */
	vport = phba->pport;
	error = lpfc_alloc_sysfs_attr(vport);
	if (error) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1416 Failed to allocate sysfs attr\n");
		goto out_destroy_shost;
	}

	/* Now, trying to enable interrupt and bring up the device */
	cfg_mode = phba->cfg_use_msi;
	while (true) {
		/* Put device to a known state before enabling interrupt */
		lpfc_stop_port(phba);
		/* Configure and enable interrupt */
		intr_mode = lpfc_sli4_enable_intr(phba, cfg_mode);
		if (intr_mode == LPFC_INTR_ERROR) {
			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
					"0426 Failed to enable interrupt.\n");
			error = -ENODEV;
			goto out_free_sysfs_attr;
		}
		/* Set up SLI-4 HBA */
		if (lpfc_sli4_hba_setup(phba)) {
			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
					"1421 Failed to set up hba\n");
			error = -ENODEV;
			goto out_disable_intr;
		}

		/* Send NOP mbx cmds for non-INTx mode active interrupt test */
		if (intr_mode != 0)
			mcnt = lpfc_sli4_send_nop_mbox_cmds(phba,
							    LPFC_ACT_INTR_CNT);

		/* Check active interrupts received only for MSI/MSI-X */
		if (intr_mode == 0 ||
		    phba->sli.slistat.sli_intr >= LPFC_ACT_INTR_CNT) {
			/* Log the current active interrupt mode */
			phba->intr_mode = intr_mode;
			lpfc_log_intr_mode(phba, intr_mode);
			break;
		}
		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
				"0451 Configure interrupt mode (%d) "
				"failed active interrupt test.\n",
				intr_mode);
		/* Unset the preivous SLI-4 HBA setup */
		lpfc_sli4_unset_hba(phba);
		/* Try next level of interrupt mode */
		cfg_mode = --intr_mode;
	}

	/* Perform post initialization setup */
	lpfc_post_init_setup(phba);

	return 0;

out_disable_intr:
	lpfc_sli4_disable_intr(phba);
out_free_sysfs_attr:
	lpfc_free_sysfs_attr(vport);
out_destroy_shost:
	lpfc_destroy_shost(phba);
out_unset_driver_resource:
	lpfc_unset_driver_resource_phase2(phba);
out_free_iocb_list:
	lpfc_free_iocb_list(phba);
out_unset_driver_resource_s4:
	lpfc_sli4_driver_resource_unset(phba);
out_unset_pci_mem_s4:
	lpfc_sli4_pci_mem_unset(phba);
out_disable_pci_dev:
	lpfc_disable_pci_dev(phba);
out_free_phba:
	lpfc_hba_free(phba);
	return error;
}

/**
 * lpfc_pci_remove_one_s4 - PCI func to unreg SLI-4 device from PCI subsystem
 * @pdev: pointer to PCI device
 *
 * This routine is called from the kernel's PCI subsystem to device with
 * SLI-4 interface spec. When an Emulex HBA with SLI-4 interface spec is
 * removed from PCI bus, it performs all the necessary cleanup for the HBA
 * device to be removed from the PCI subsystem properly.
 **/
static void __devexit
lpfc_pci_remove_one_s4(struct pci_dev *pdev)
{
	struct Scsi_Host *shost = pci_get_drvdata(pdev);
	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
	struct lpfc_vport **vports;
	struct lpfc_hba *phba = vport->phba;
	int i;

	/* Mark the device unloading flag */
	spin_lock_irq(&phba->hbalock);
	vport->load_flag |= FC_UNLOADING;
	spin_unlock_irq(&phba->hbalock);

	/* Free the HBA sysfs attributes */
	lpfc_free_sysfs_attr(vport);

	/* Release all the vports against this physical port */
	vports = lpfc_create_vport_work_array(phba);
	if (vports != NULL)
		for (i = 1; i <= phba->max_vports && vports[i] != NULL; i++)
			fc_vport_terminate(vports[i]->fc_vport);
	lpfc_destroy_vport_work_array(phba, vports);

	/* Remove FC host and then SCSI host with the physical port */
	fc_remove_host(shost);
	scsi_remove_host(shost);

	/* Perform cleanup on the physical port */
	lpfc_cleanup(vport);

	/*
	 * Bring down the SLI Layer. This step disables all interrupts,
	 * clears the rings, discards all mailbox commands, and resets
	 * the HBA FCoE function.
	 */
	lpfc_debugfs_terminate(vport);
	lpfc_sli4_hba_unset(phba);

	spin_lock_irq(&phba->hbalock);
	list_del_init(&vport->listentry);
	spin_unlock_irq(&phba->hbalock);

	/* Call scsi_free before lpfc_sli4_driver_resource_unset since scsi
	 * buffers are released to their corresponding pools here.
	 */
	lpfc_scsi_free(phba);
	lpfc_sli4_driver_resource_unset(phba);

	/* Unmap adapter Control and Doorbell registers */
	lpfc_sli4_pci_mem_unset(phba);

	/* Release PCI resources and disable device's PCI function */
	scsi_host_put(shost);
	lpfc_disable_pci_dev(phba);

	/* Finally, free the driver's device data structure */
	lpfc_hba_free(phba);

	return;
}

/**
 * lpfc_pci_suspend_one_s4 - PCI func to suspend SLI-4 device for power mgmnt
 * @pdev: pointer to PCI device
 * @msg: power management message
 *
 * This routine is called from the kernel's PCI subsystem to support system
 * Power Management (PM) to device with SLI-4 interface spec. When PM invokes
 * this method, it quiesces the device by stopping the driver's worker
 * thread for the device, turning off device's interrupt and DMA, and bring
 * the device offline. Note that as the driver implements the minimum PM
 * requirements to a power-aware driver's PM support for suspend/resume -- all
 * the possible PM messages (SUSPEND, HIBERNATE, FREEZE) to the suspend()
 * method call will be treated as SUSPEND and the driver will fully
 * reinitialize its device during resume() method call, the driver will set
 * device to PCI_D3hot state in PCI config space instead of setting it
 * according to the @msg provided by the PM.
 *
 * Return code
 * 	0 - driver suspended the device
 * 	Error otherwise
 **/
static int
lpfc_pci_suspend_one_s4(struct pci_dev *pdev, pm_message_t msg)
{
	struct Scsi_Host *shost = pci_get_drvdata(pdev);
	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;

	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
			"0298 PCI device Power Management suspend.\n");

	/* Bring down the device */
	lpfc_offline_prep(phba);
	lpfc_offline(phba);
	kthread_stop(phba->worker_thread);

	/* Disable interrupt from device */
	lpfc_sli4_disable_intr(phba);

	/* Save device state to PCI config space */
	pci_save_state(pdev);
	pci_set_power_state(pdev, PCI_D3hot);

	return 0;
}

/**
 * lpfc_pci_resume_one_s4 - PCI func to resume SLI-4 device for power mgmnt
 * @pdev: pointer to PCI device
 *
 * This routine is called from the kernel's PCI subsystem to support system
 * Power Management (PM) to device with SLI-4 interface spac. When PM invokes
 * this method, it restores the device's PCI config space state and fully
 * reinitializes the device and brings it online. Note that as the driver
 * implements the minimum PM requirements to a power-aware driver's PM for
 * suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE, FREEZE)
 * to the suspend() method call will be treated as SUSPEND and the driver
 * will fully reinitialize its device during resume() method call, the device
 * will be set to PCI_D0 directly in PCI config space before restoring the
 * state.
 *
 * Return code
 * 	0 - driver suspended the device
 * 	Error otherwise
 **/
static int
lpfc_pci_resume_one_s4(struct pci_dev *pdev)
{
	struct Scsi_Host *shost = pci_get_drvdata(pdev);
	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
	uint32_t intr_mode;
	int error;

	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
			"0292 PCI device Power Management resume.\n");

	/* Restore device state from PCI config space */
	pci_set_power_state(pdev, PCI_D0);
	pci_restore_state(pdev);
	if (pdev->is_busmaster)
		pci_set_master(pdev);

	 /* Startup the kernel thread for this host adapter. */
	phba->worker_thread = kthread_run(lpfc_do_work, phba,
					"lpfc_worker_%d", phba->brd_no);
	if (IS_ERR(phba->worker_thread)) {
		error = PTR_ERR(phba->worker_thread);
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0293 PM resume failed to start worker "
				"thread: error=x%x.\n", error);
		return error;
	}

	/* Configure and enable interrupt */
	intr_mode = lpfc_sli4_enable_intr(phba, phba->intr_mode);
	if (intr_mode == LPFC_INTR_ERROR) {
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"0294 PM resume Failed to enable interrupt\n");
		return -EIO;
	} else
		phba->intr_mode = intr_mode;

	/* Restart HBA and bring it online */
	lpfc_sli_brdrestart(phba);
	lpfc_online(phba);

	/* Log the current active interrupt mode */
	lpfc_log_intr_mode(phba, phba->intr_mode);

	return 0;
}

/**
 * lpfc_io_error_detected_s4 - Method for handling PCI I/O error to SLI-4 device
 * @pdev: pointer to PCI device.
 * @state: the current PCI connection state.
 *
 * This routine is called from the PCI subsystem for error handling to device
 * with SLI-4 interface spec. This function is called by the PCI subsystem
 * after a PCI bus error affecting this device has been detected. When this
 * function is invoked, it will need to stop all the I/Os and interrupt(s)
 * to the device. Once that is done, it will return PCI_ERS_RESULT_NEED_RESET
 * for the PCI subsystem to perform proper recovery as desired.
 *
 * Return codes
 * 	PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
 * 	PCI_ERS_RESULT_DISCONNECT - device could not be recovered
 **/
static pci_ers_result_t
lpfc_io_error_detected_s4(struct pci_dev *pdev, pci_channel_state_t state)
{
	return PCI_ERS_RESULT_NEED_RESET;
}

/**
 * lpfc_io_slot_reset_s4 - Method for restart PCI SLI-4 device from scratch
 * @pdev: pointer to PCI device.
 *
 * This routine is called from the PCI subsystem for error handling to device
 * with SLI-4 interface spec. It is called after PCI bus has been reset to
 * restart the PCI card from scratch, as if from a cold-boot. During the
 * PCI subsystem error recovery, after the driver returns
 * PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform proper error
 * recovery and then call this routine before calling the .resume method to
 * recover the device. This function will initialize the HBA device, enable
 * the interrupt, but it will just put the HBA to offline state without
 * passing any I/O traffic.
 *
 * Return codes
 * 	PCI_ERS_RESULT_RECOVERED - the device has been recovered
 * 	PCI_ERS_RESULT_DISCONNECT - device could not be recovered
 */
static pci_ers_result_t
lpfc_io_slot_reset_s4(struct pci_dev *pdev)
{
	return PCI_ERS_RESULT_RECOVERED;
}

/**
 * lpfc_io_resume_s4 - Method for resuming PCI I/O operation to SLI-4 device
 * @pdev: pointer to PCI device
 *
 * This routine is called from the PCI subsystem for error handling to device
 * with SLI-4 interface spec. It is called when kernel error recovery tells
 * the lpfc driver that it is ok to resume normal PCI operation after PCI bus
 * error recovery. After this call, traffic can start to flow from this device
 * again.
 **/
static void
lpfc_io_resume_s4(struct pci_dev *pdev)
{
	return;
}

/**
 * lpfc_pci_probe_one - lpfc PCI probe func to reg dev to PCI subsystem
 * @pdev: pointer to PCI device
 * @pid: pointer to PCI device identifier
 *
 * This routine is to be registered to the kernel's PCI subsystem. When an
 * Emulex HBA device is presented on PCI bus, the kernel PCI subsystem looks
 * at PCI device-specific information of the device and driver to see if the
 * driver state that it can support this kind of device. If the match is
 * successful, the driver core invokes this routine. This routine dispatches
 * the action to the proper SLI-3 or SLI-4 device probing routine, which will
 * do all the initialization that it needs to do to handle the HBA device
 * properly.
 *
 * Return code
 * 	0 - driver can claim the device
 * 	negative value - driver can not claim the device
 **/
static int __devinit
lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
{
	int rc;
	struct lpfc_sli_intf intf;

	if (pci_read_config_dword(pdev, LPFC_SLIREV_CONF_WORD, &intf.word0))
		return -ENODEV;

	if ((bf_get(lpfc_sli_intf_valid, &intf) == LPFC_SLI_INTF_VALID) &&
		(bf_get(lpfc_sli_intf_rev, &intf) == LPFC_SLIREV_CONF_SLI4))
		rc = lpfc_pci_probe_one_s4(pdev, pid);
	else
		rc = lpfc_pci_probe_one_s3(pdev, pid);

	return rc;
}

/**
 * lpfc_pci_remove_one - lpfc PCI func to unreg dev from PCI subsystem
 * @pdev: pointer to PCI device
 *
 * This routine is to be registered to the kernel's PCI subsystem. When an
 * Emulex HBA is removed from PCI bus, the driver core invokes this routine.
 * This routine dispatches the action to the proper SLI-3 or SLI-4 device
 * remove routine, which will perform all the necessary cleanup for the
 * device to be removed from the PCI subsystem properly.
 **/
static void __devexit
lpfc_pci_remove_one(struct pci_dev *pdev)
{
	struct Scsi_Host *shost = pci_get_drvdata(pdev);
	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;

	switch (phba->pci_dev_grp) {
	case LPFC_PCI_DEV_LP:
		lpfc_pci_remove_one_s3(pdev);
		break;
	case LPFC_PCI_DEV_OC:
		lpfc_pci_remove_one_s4(pdev);
		break;
	default:
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1424 Invalid PCI device group: 0x%x\n",
				phba->pci_dev_grp);
		break;
	}
	return;
}

/**
 * lpfc_pci_suspend_one - lpfc PCI func to suspend dev for power management
 * @pdev: pointer to PCI device
 * @msg: power management message
 *
 * This routine is to be registered to the kernel's PCI subsystem to support
 * system Power Management (PM). When PM invokes this method, it dispatches
 * the action to the proper SLI-3 or SLI-4 device suspend routine, which will
 * suspend the device.
 *
 * Return code
 * 	0 - driver suspended the device
 * 	Error otherwise
 **/
static int
lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
{
	struct Scsi_Host *shost = pci_get_drvdata(pdev);
	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
	int rc = -ENODEV;

	switch (phba->pci_dev_grp) {
	case LPFC_PCI_DEV_LP:
		rc = lpfc_pci_suspend_one_s3(pdev, msg);
		break;
	case LPFC_PCI_DEV_OC:
		rc = lpfc_pci_suspend_one_s4(pdev, msg);
		break;
	default:
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1425 Invalid PCI device group: 0x%x\n",
				phba->pci_dev_grp);
		break;
	}
	return rc;
}

/**
 * lpfc_pci_resume_one - lpfc PCI func to resume dev for power management
 * @pdev: pointer to PCI device
 *
 * This routine is to be registered to the kernel's PCI subsystem to support
 * system Power Management (PM). When PM invokes this method, it dispatches
 * the action to the proper SLI-3 or SLI-4 device resume routine, which will
 * resume the device.
 *
 * Return code
 * 	0 - driver suspended the device
 * 	Error otherwise
 **/
static int
lpfc_pci_resume_one(struct pci_dev *pdev)
{
	struct Scsi_Host *shost = pci_get_drvdata(pdev);
	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
	int rc = -ENODEV;

	switch (phba->pci_dev_grp) {
	case LPFC_PCI_DEV_LP:
		rc = lpfc_pci_resume_one_s3(pdev);
		break;
	case LPFC_PCI_DEV_OC:
		rc = lpfc_pci_resume_one_s4(pdev);
		break;
	default:
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1426 Invalid PCI device group: 0x%x\n",
				phba->pci_dev_grp);
		break;
	}
	return rc;
}

/**
 * lpfc_io_error_detected - lpfc method for handling PCI I/O error
 * @pdev: pointer to PCI device.
 * @state: the current PCI connection state.
 *
 * This routine is registered to the PCI subsystem for error handling. This
 * function is called by the PCI subsystem after a PCI bus error affecting
 * this device has been detected. When this routine is invoked, it dispatches
 * the action to the proper SLI-3 or SLI-4 device error detected handling
 * routine, which will perform the proper error detected operation.
 *
 * Return codes
 * 	PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
 * 	PCI_ERS_RESULT_DISCONNECT - device could not be recovered
 **/
static pci_ers_result_t
lpfc_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
{
	struct Scsi_Host *shost = pci_get_drvdata(pdev);
	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
	pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;

	switch (phba->pci_dev_grp) {
	case LPFC_PCI_DEV_LP:
		rc = lpfc_io_error_detected_s3(pdev, state);
		break;
	case LPFC_PCI_DEV_OC:
		rc = lpfc_io_error_detected_s4(pdev, state);
		break;
	default:
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1427 Invalid PCI device group: 0x%x\n",
				phba->pci_dev_grp);
		break;
	}
	return rc;
}

/**
 * lpfc_io_slot_reset - lpfc method for restart PCI dev from scratch
 * @pdev: pointer to PCI device.
 *
 * This routine is registered to the PCI subsystem for error handling. This
 * function is called after PCI bus has been reset to restart the PCI card
 * from scratch, as if from a cold-boot. When this routine is invoked, it
 * dispatches the action to the proper SLI-3 or SLI-4 device reset handling
 * routine, which will perform the proper device reset.
 *
 * Return codes
 * 	PCI_ERS_RESULT_RECOVERED - the device has been recovered
 * 	PCI_ERS_RESULT_DISCONNECT - device could not be recovered
 **/
static pci_ers_result_t
lpfc_io_slot_reset(struct pci_dev *pdev)
{
	struct Scsi_Host *shost = pci_get_drvdata(pdev);
	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
	pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;

	switch (phba->pci_dev_grp) {
	case LPFC_PCI_DEV_LP:
		rc = lpfc_io_slot_reset_s3(pdev);
		break;
	case LPFC_PCI_DEV_OC:
		rc = lpfc_io_slot_reset_s4(pdev);
		break;
	default:
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1428 Invalid PCI device group: 0x%x\n",
				phba->pci_dev_grp);
		break;
	}
	return rc;
}

/**
 * lpfc_io_resume - lpfc method for resuming PCI I/O operation
 * @pdev: pointer to PCI device
 *
 * This routine is registered to the PCI subsystem for error handling. It
 * is called when kernel error recovery tells the lpfc driver that it is
 * OK to resume normal PCI operation after PCI bus error recovery. When
 * this routine is invoked, it dispatches the action to the proper SLI-3
 * or SLI-4 device io_resume routine, which will resume the device operation.
 **/
static void
lpfc_io_resume(struct pci_dev *pdev)
{
	struct Scsi_Host *shost = pci_get_drvdata(pdev);
	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;

	switch (phba->pci_dev_grp) {
	case LPFC_PCI_DEV_LP:
		lpfc_io_resume_s3(pdev);
		break;
	case LPFC_PCI_DEV_OC:
		lpfc_io_resume_s4(pdev);
		break;
	default:
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1429 Invalid PCI device group: 0x%x\n",
				phba->pci_dev_grp);
		break;
	}
	return;
}

static struct pci_device_id lpfc_id_table[] = {
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_VIPER,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_FIREFLY,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_THOR,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PEGASUS,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_CENTAUR,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_DRAGONFLY,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SUPERFLY,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_RFLY,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PFLY,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_NEPTUNE,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_NEPTUNE_SCSP,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_NEPTUNE_DCSP,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HELIOS,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HELIOS_SCSP,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HELIOS_DCSP,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_BMID,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_BSMB,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HORNET,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR_SCSP,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR_DCSP,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZMID,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZSMB,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_TFLY,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LP101,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LP10000S,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LP11000S,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LPE11000S,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_MID,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_SMB,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_DCSP,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_SCSP,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_S,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PROTEUS_VF,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PROTEUS_PF,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PROTEUS_S,
		PCI_ANY_ID, PCI_ANY_ID, },
	{PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TIGERSHARK,
		PCI_ANY_ID, PCI_ANY_ID, },
	{ 0 }
};

MODULE_DEVICE_TABLE(pci, lpfc_id_table);

static struct pci_error_handlers lpfc_err_handler = {
	.error_detected = lpfc_io_error_detected,
	.slot_reset = lpfc_io_slot_reset,
	.resume = lpfc_io_resume,
};

static struct pci_driver lpfc_driver = {
	.name		= LPFC_DRIVER_NAME,
	.id_table	= lpfc_id_table,
	.probe		= lpfc_pci_probe_one,
	.remove		= __devexit_p(lpfc_pci_remove_one),
	.suspend        = lpfc_pci_suspend_one,
	.resume		= lpfc_pci_resume_one,
	.err_handler    = &lpfc_err_handler,
};

/**
 * lpfc_init - lpfc module initialization routine
 *
 * This routine is to be invoked when the lpfc module is loaded into the
 * kernel. The special kernel macro module_init() is used to indicate the
 * role of this routine to the kernel as lpfc module entry point.
 *
 * Return codes
 *   0 - successful
 *   -ENOMEM - FC attach transport failed
 *   all others - failed
 */
static int __init
lpfc_init(void)
{
	int error = 0;

	printk(LPFC_MODULE_DESC "\n");
	printk(LPFC_COPYRIGHT "\n");

	if (lpfc_enable_npiv) {
		lpfc_transport_functions.vport_create = lpfc_vport_create;
		lpfc_transport_functions.vport_delete = lpfc_vport_delete;
	}
	lpfc_transport_template =
				fc_attach_transport(&lpfc_transport_functions);
	if (lpfc_transport_template == NULL)
		return -ENOMEM;
	if (lpfc_enable_npiv) {
		lpfc_vport_transport_template =
			fc_attach_transport(&lpfc_vport_transport_functions);
		if (lpfc_vport_transport_template == NULL) {
			fc_release_transport(lpfc_transport_template);
			return -ENOMEM;
		}
	}
	error = pci_register_driver(&lpfc_driver);
	if (error) {
		fc_release_transport(lpfc_transport_template);
		if (lpfc_enable_npiv)
			fc_release_transport(lpfc_vport_transport_template);
	}

	return error;
}

/**
 * lpfc_exit - lpfc module removal routine
 *
 * This routine is invoked when the lpfc module is removed from the kernel.
 * The special kernel macro module_exit() is used to indicate the role of
 * this routine to the kernel as lpfc module exit point.
 */
static void __exit
lpfc_exit(void)
{
	pci_unregister_driver(&lpfc_driver);
	fc_release_transport(lpfc_transport_template);
	if (lpfc_enable_npiv)
		fc_release_transport(lpfc_vport_transport_template);
	if (_dump_buf_data) {
		printk(KERN_ERR "BLKGRD freeing %lu pages for _dump_buf_data "
				"at 0x%p\n",
				(1L << _dump_buf_data_order), _dump_buf_data);
		free_pages((unsigned long)_dump_buf_data, _dump_buf_data_order);
	}

	if (_dump_buf_dif) {
		printk(KERN_ERR "BLKGRD freeing %lu pages for _dump_buf_dif "
				"at 0x%p\n",
				(1L << _dump_buf_dif_order), _dump_buf_dif);
		free_pages((unsigned long)_dump_buf_dif, _dump_buf_dif_order);
	}
}

module_init(lpfc_init);
module_exit(lpfc_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION(LPFC_MODULE_DESC);
MODULE_AUTHOR("Emulex Corporation - tech.support@emulex.com");
MODULE_VERSION("0:" LPFC_DRIVER_VERSION);