dwc3-pci.c 10.5 KB
Newer Older
1 2 3 4 5 6 7 8
/**
 * dwc3-pci.c - PCI Specific glue layer
 *
 * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
 *
 * Authors: Felipe Balbi <balbi@ti.com>,
 *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
 *
F
Felipe Balbi 已提交
9 10 11
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2  of
 * the License as published by the Free Software Foundation.
12
 *
F
Felipe Balbi 已提交
13 14 15 16
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
17 18 19
 */

#include <linux/kernel.h>
20
#include <linux/module.h>
21 22
#include <linux/slab.h>
#include <linux/pci.h>
23
#include <linux/workqueue.h>
24
#include <linux/pm_runtime.h>
25
#include <linux/platform_device.h>
26 27
#include <linux/gpio/consumer.h>
#include <linux/acpi.h>
28
#include <linux/delay.h>
29

J
John Youn 已提交
30 31 32 33 34 35 36 37
#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3		0xabcd
#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI	0xabce
#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31	0xabcf
#define PCI_DEVICE_ID_INTEL_BYT			0x0f37
#define PCI_DEVICE_ID_INTEL_MRFLD		0x119e
#define PCI_DEVICE_ID_INTEL_BSW			0x22b7
#define PCI_DEVICE_ID_INTEL_SPTLP		0x9d30
#define PCI_DEVICE_ID_INTEL_SPTH		0xa130
38
#define PCI_DEVICE_ID_INTEL_BXT			0x0aaa
39
#define PCI_DEVICE_ID_INTEL_BXT_M		0x1aaa
40
#define PCI_DEVICE_ID_INTEL_APL			0x5aaa
41
#define PCI_DEVICE_ID_INTEL_KBP			0xa2b0
42
#define PCI_DEVICE_ID_INTEL_GLK			0x31aa
43 44
#define PCI_DEVICE_ID_INTEL_CNPLP		0x9dee
#define PCI_DEVICE_ID_INTEL_CNPH		0xa36e
45

46
#define PCI_INTEL_BXT_DSM_GUID		"732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511"
47 48 49 50
#define PCI_INTEL_BXT_FUNC_PMU_PWR	4
#define PCI_INTEL_BXT_STATE_D0		0
#define PCI_INTEL_BXT_STATE_D3		3

51 52 53 54
/**
 * struct dwc3_pci - Driver private structure
 * @dwc3: child dwc3 platform_device
 * @pci: our link to PCI bus
55
 * @guid: _DSM GUID
56
 * @has_dsm_for_pm: true for devices which need to run _DSM on runtime PM
57 58 59 60
 */
struct dwc3_pci {
	struct platform_device *dwc3;
	struct pci_dev *pci;
61

62
	guid_t guid;
63 64

	unsigned int has_dsm_for_pm:1;
65
	struct work_struct wakeup_work;
66 67
};

68 69 70 71 72 73 74 75 76
static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
static const struct acpi_gpio_params cs_gpios = { 1, 0, false };

static const struct acpi_gpio_mapping acpi_dwc3_byt_gpios[] = {
	{ "reset-gpios", &reset_gpios, 1 },
	{ "cs-gpios", &cs_gpios, 1 },
	{ },
};

77
static int dwc3_pci_quirks(struct dwc3_pci *dwc)
H
Heikki Krogerus 已提交
78
{
79 80 81
	struct platform_device		*dwc3 = dwc->dwc3;
	struct pci_dev			*pdev = dwc->pci;

H
Heikki Krogerus 已提交
82 83
	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
	    pdev->device == PCI_DEVICE_ID_AMD_NL_USB) {
84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102
		struct property_entry properties[] = {
			PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"),
			PROPERTY_ENTRY_U8("snps,lpm-nyet-threshold", 0xf),
			PROPERTY_ENTRY_BOOL("snps,u2exit_lfps_quirk"),
			PROPERTY_ENTRY_BOOL("snps,u2ss_inp3_quirk"),
			PROPERTY_ENTRY_BOOL("snps,req_p1p2p3_quirk"),
			PROPERTY_ENTRY_BOOL("snps,del_p1p2p3_quirk"),
			PROPERTY_ENTRY_BOOL("snps,del_phy_power_chg_quirk"),
			PROPERTY_ENTRY_BOOL("snps,lfps_filter_quirk"),
			PROPERTY_ENTRY_BOOL("snps,rx_detect_poll_quirk"),
			PROPERTY_ENTRY_BOOL("snps,tx_de_emphasis_quirk"),
			PROPERTY_ENTRY_U8("snps,tx_de_emphasis", 1),
			/*
			 * FIXME these quirks should be removed when AMD NL
			 * tapes out
			 */
			PROPERTY_ENTRY_BOOL("snps,disable_scramble_quirk"),
			PROPERTY_ENTRY_BOOL("snps,dis_u3_susphy_quirk"),
			PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
103
			PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
104 105 106 107
			{ },
		};

		return platform_device_add_properties(dwc3, properties);
H
Heikki Krogerus 已提交
108 109
	}

110 111 112 113
	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
		int ret;

		struct property_entry properties[] = {
114
			PROPERTY_ENTRY_STRING("dr_mode", "peripheral"),
115
			PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
116 117 118 119 120 121 122
			{ }
		};

		ret = platform_device_add_properties(dwc3, properties);
		if (ret < 0)
			return ret;

123 124
		if (pdev->device == PCI_DEVICE_ID_INTEL_BXT ||
				pdev->device == PCI_DEVICE_ID_INTEL_BXT_M) {
125
			guid_parse(PCI_INTEL_BXT_DSM_GUID, &dwc->guid);
126 127 128
			dwc->has_dsm_for_pm = true;
		}

129 130 131
		if (pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
			struct gpio_desc *gpio;

132
			ret = devm_acpi_dev_add_driver_gpios(&pdev->dev,
133
					acpi_dwc3_byt_gpios);
134 135
			if (ret)
				dev_dbg(&pdev->dev, "failed to add mapping table\n");
136 137 138 139 140 141 142 143 144 145

			/*
			 * These GPIOs will turn on the USB2 PHY. Note that we have to
			 * put the gpio descriptors again here because the phy driver
			 * might want to grab them, too.
			 */
			gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW);
			if (IS_ERR(gpio))
				return PTR_ERR(gpio);

146 147
			gpiod_set_value_cansleep(gpio, 1);
			gpiod_put(gpio);
148 149 150 151 152 153 154 155 156 157

			gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
			if (IS_ERR(gpio))
				return PTR_ERR(gpio);

			if (gpio) {
				gpiod_set_value_cansleep(gpio, 1);
				gpiod_put(gpio);
				usleep_range(10000, 11000);
			}
158 159 160
		}
	}

161 162 163 164
	if (pdev->vendor == PCI_VENDOR_ID_SYNOPSYS &&
	    (pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 ||
	     pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI ||
	     pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31)) {
165 166 167 168
		struct property_entry properties[] = {
			PROPERTY_ENTRY_BOOL("snps,usb3_lpm_capable"),
			PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"),
			PROPERTY_ENTRY_BOOL("snps,dis_enblslpm_quirk"),
169
			PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
170 171 172 173
			{ },
		};

		return platform_device_add_properties(dwc3, properties);
174 175
	}

H
Heikki Krogerus 已提交
176 177
	return 0;
}
178

179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194
#ifdef CONFIG_PM
static void dwc3_pci_resume_work(struct work_struct *work)
{
	struct dwc3_pci *dwc = container_of(work, struct dwc3_pci, wakeup_work);
	struct platform_device *dwc3 = dwc->dwc3;
	int ret;

	ret = pm_runtime_get_sync(&dwc3->dev);
	if (ret)
		return;

	pm_runtime_mark_last_busy(&dwc3->dev);
	pm_runtime_put_sync_autosuspend(&dwc3->dev);
}
#endif

B
Bill Pemberton 已提交
195
static int dwc3_pci_probe(struct pci_dev *pci,
196 197
		const struct pci_device_id *id)
{
198
	struct dwc3_pci		*dwc;
199
	struct resource		res[2];
200
	int			ret;
C
Chanho Park 已提交
201
	struct device		*dev = &pci->dev;
202

203
	ret = pcim_enable_device(pci);
204
	if (ret) {
C
Chanho Park 已提交
205 206
		dev_err(dev, "failed to enable pci device\n");
		return -ENODEV;
207 208 209 210
	}

	pci_set_master(pci);

211 212 213 214 215 216
	dwc = devm_kzalloc(dev, sizeof(*dwc), GFP_KERNEL);
	if (!dwc)
		return -ENOMEM;

	dwc->dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
	if (!dwc->dwc3)
217
		return -ENOMEM;
218 219 220 221 222 223 224 225 226 227 228 229

	memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res));

	res[0].start	= pci_resource_start(pci, 0);
	res[0].end	= pci_resource_end(pci, 0);
	res[0].name	= "dwc_usb3";
	res[0].flags	= IORESOURCE_MEM;

	res[1].start	= pci->irq;
	res[1].name	= "dwc_usb3";
	res[1].flags	= IORESOURCE_IRQ;

230
	ret = platform_device_add_resources(dwc->dwc3, res, ARRAY_SIZE(res));
231
	if (ret) {
C
Chanho Park 已提交
232
		dev_err(dev, "couldn't add resources to dwc3 device\n");
233
		return ret;
234 235
	}

236 237 238
	dwc->pci = pci;
	dwc->dwc3->dev.parent = dev;
	ACPI_COMPANION_SET(&dwc->dwc3->dev, ACPI_COMPANION(dev));
239

240
	ret = dwc3_pci_quirks(dwc);
241 242 243
	if (ret)
		goto err;

244
	ret = platform_device_add(dwc->dwc3);
245
	if (ret) {
C
Chanho Park 已提交
246
		dev_err(dev, "failed to register dwc3 device\n");
H
Heikki Krogerus 已提交
247
		goto err;
248 249
	}

250
	device_init_wakeup(dev, true);
251
	pci_set_drvdata(pci, dwc);
252
	pm_runtime_put(dev);
253 254 255
#ifdef CONFIG_PM
	INIT_WORK(&dwc->wakeup_work, dwc3_pci_resume_work);
#endif
256

257
	return 0;
H
Heikki Krogerus 已提交
258
err:
259
	platform_device_put(dwc->dwc3);
260 261 262
	return ret;
}

B
Bill Pemberton 已提交
263
static void dwc3_pci_remove(struct pci_dev *pci)
264
{
265 266
	struct dwc3_pci		*dwc = pci_get_drvdata(pci);

267 268 269
#ifdef CONFIG_PM
	cancel_work_sync(&dwc->wakeup_work);
#endif
270 271
	device_init_wakeup(&pci->dev, false);
	pm_runtime_get(&pci->dev);
272
	platform_device_unregister(dwc->dwc3);
273 274
}

275
static const struct pci_device_id dwc3_pci_id_table[] = {
276 277 278 279
	{
		PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
				PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3),
	},
280 281 282 283
	{
		PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
				PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI),
	},
284 285 286 287
	{
		PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
				PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31),
	},
288
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BSW), },
289
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT), },
290
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MRFLD), },
291 292
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTLP), },
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTH), },
293
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT), },
294
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT_M), },
295
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), },
296
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBP), },
297
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_GLK), },
298 299
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CNPLP), },
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CNPH), },
300
	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), },
301 302 303 304
	{  }	/* Terminating Entry */
};
MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table);

F
Felipe Balbi 已提交
305 306 307 308 309 310 311 312 313 314 315 316 317
#if defined(CONFIG_PM) || defined(CONFIG_PM_SLEEP)
static int dwc3_pci_dsm(struct dwc3_pci *dwc, int param)
{
	union acpi_object *obj;
	union acpi_object tmp;
	union acpi_object argv4 = ACPI_INIT_DSM_ARGV4(1, &tmp);

	if (!dwc->has_dsm_for_pm)
		return 0;

	tmp.type = ACPI_TYPE_INTEGER;
	tmp.integer.value = param;

318
	obj = acpi_evaluate_dsm(ACPI_HANDLE(&dwc->pci->dev), &dwc->guid,
F
Felipe Balbi 已提交
319 320 321 322 323 324 325 326 327 328 329 330
			1, PCI_INTEL_BXT_FUNC_PMU_PWR, &argv4);
	if (!obj) {
		dev_err(&dwc->pci->dev, "failed to evaluate _DSM\n");
		return -EIO;
	}

	ACPI_FREE(obj);

	return 0;
}
#endif /* CONFIG_PM || CONFIG_PM_SLEEP */

331 332 333
#ifdef CONFIG_PM
static int dwc3_pci_runtime_suspend(struct device *dev)
{
334 335
	struct dwc3_pci		*dwc = dev_get_drvdata(dev);

336
	if (device_can_wakeup(dev))
337
		return dwc3_pci_dsm(dwc, PCI_INTEL_BXT_STATE_D3);
338 339 340 341

	return -EBUSY;
}

342 343
static int dwc3_pci_runtime_resume(struct device *dev)
{
344
	struct dwc3_pci		*dwc = dev_get_drvdata(dev);
345 346 347 348 349
	int			ret;

	ret = dwc3_pci_dsm(dwc, PCI_INTEL_BXT_STATE_D0);
	if (ret)
		return ret;
350

351 352 353
	queue_work(pm_wq, &dwc->wakeup_work);

	return 0;
354
}
355
#endif /* CONFIG_PM */
356

357
#ifdef CONFIG_PM_SLEEP
358
static int dwc3_pci_suspend(struct device *dev)
359
{
360 361 362 363 364 365 366 367 368 369
	struct dwc3_pci		*dwc = dev_get_drvdata(dev);

	return dwc3_pci_dsm(dwc, PCI_INTEL_BXT_STATE_D3);
}

static int dwc3_pci_resume(struct device *dev)
{
	struct dwc3_pci		*dwc = dev_get_drvdata(dev);

	return dwc3_pci_dsm(dwc, PCI_INTEL_BXT_STATE_D0);
370
}
371
#endif /* CONFIG_PM_SLEEP */
372

D
Doug Wilson 已提交
373
static const struct dev_pm_ops dwc3_pci_dev_pm_ops = {
374
	SET_SYSTEM_SLEEP_PM_OPS(dwc3_pci_suspend, dwc3_pci_resume)
375
	SET_RUNTIME_PM_OPS(dwc3_pci_runtime_suspend, dwc3_pci_runtime_resume,
376 377 378
		NULL)
};

379
static struct pci_driver dwc3_pci_driver = {
380
	.name		= "dwc3-pci",
381 382
	.id_table	= dwc3_pci_id_table,
	.probe		= dwc3_pci_probe,
B
Bill Pemberton 已提交
383
	.remove		= dwc3_pci_remove,
384 385 386
	.driver		= {
		.pm	= &dwc3_pci_dev_pm_ops,
	}
387 388 389
};

MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
F
Felipe Balbi 已提交
390
MODULE_LICENSE("GPL v2");
391 392
MODULE_DESCRIPTION("DesignWare USB3 PCI Glue Layer");

G
Greg Kroah-Hartman 已提交
393
module_pci_driver(dwc3_pci_driver);