Kconfig 16.0 KB
Newer Older
L
Linus Torvalds 已提交
1 2 3 4
#
# Misc strange devices
#

R
Randy Dunlap 已提交
5
menuconfig MISC_DEVICES
6 7
	bool "Misc devices"
	default y
8 9 10 11 12
	---help---
	  Say Y here to get to see options for device drivers from various
	  different categories. This option alone does not add any kernel code.

	  If you say N, all options in this submenu will be skipped and disabled.
13

R
Randy Dunlap 已提交
14
if MISC_DEVICES
L
Linus Torvalds 已提交
15

16 17
config ATMEL_PWM
	tristate "Atmel AT32/AT91 PWM support"
18
	depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9
19 20 21 22 23 24
	help
	  This option enables device driver support for the PWM channels
	  on certain Atmel prcoessors.  Pulse Width Modulation is used for
	  purposes including software controlled power-efficent backlights
	  on LCD displays, motor control, and waveform generation.

D
David Brownell 已提交
25 26 27 28 29 30 31 32
config ATMEL_TCLIB
	bool "Atmel AT32/AT91 Timer/Counter Library"
	depends on (AVR32 || ARCH_AT91)
	help
	  Select this if you want a library to allocate the Timer/Counter
	  blocks found on many Atmel processors.  This facilitates using
	  these blocks by different drivers despite processor differences.

33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57
config ATMEL_TCB_CLKSRC
	bool "TC Block Clocksource"
	depends on ATMEL_TCLIB && GENERIC_TIME
	default y
	help
	  Select this to get a high precision clocksource based on a
	  TC block with a 5+ MHz base clock rate.  Two timer channels
	  are combined to make a single 32-bit timer.

	  When GENERIC_CLOCKEVENTS is defined, the third timer channel
	  may be used as a clock event device supporting oneshot mode
	  (delays of up to two seconds) based on the 32 KiHz clock.

config ATMEL_TCB_CLKSRC_BLOCK
	int
	depends on ATMEL_TCB_CLKSRC
	prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X
	default 0
	range 0 1
	help
	  Some chips provide more than one TC block, so you have the
	  choice of which one to use for the clock framework.  The other
	  TC can be used for other purposes, such as PWM generation and
	  interval timing.

L
Linus Torvalds 已提交
58 59
config IBM_ASM
	tristate "Device driver for IBM RSA service processor"
60
	depends on X86 && PCI && INPUT && EXPERIMENTAL
L
Linus Torvalds 已提交
61 62 63 64 65 66 67 68 69 70 71
	---help---
	  This option enables device driver support for in-band access to the
	  IBM RSA (Condor) service processor in eServer xSeries systems.
	  The ibmasm device driver allows user space application to access
	  ASM (Advanced Systems Management) functions on the service
	  processor. The driver is meant to be used in conjunction with
	  a user space API.
	  The ibmasm driver also enables the OS to use the UART on the
	  service processor board as a regular serial port. To make use of
	  this feature serial driver support (CONFIG_SERIAL_8250) must be
	  enabled.
72

L
Linus Torvalds 已提交
73 74
	  WARNING: This software may not be supported or function
	  correctly on your IBM server. Please consult the IBM ServerProven
75
	  website <http://www.pc.ibm.com/ww/eserver/xseries/serverproven> for
L
Linus Torvalds 已提交
76 77 78
	  information on the specific driver level and support statement
	  for your IBM server.

J
Jiri Slaby 已提交
79
config PHANTOM
J
Jiri Slaby 已提交
80
	tristate "Sensable PHANToM (PCI)"
J
Jiri Slaby 已提交
81 82 83 84
	depends on PCI
	help
	  Say Y here if you want to build a driver for Sensable PHANToM device.

J
Jiri Slaby 已提交
85 86
	  This driver is only for PCI PHANToMs.

J
Jiri Slaby 已提交
87 88 89
	  If you choose to build module, its name will be phantom. If unsure,
	  say N here.

I
Ivo van Doorn 已提交
90 91 92 93 94
config EEPROM_93CX6
	tristate "EEPROM 93CX6 support"
	---help---
	  This is a driver for the EEPROM chipsets 93c46 and 93c66.
	  The driver supports both read as well as write commands.
L
Linus Torvalds 已提交
95 96 97

	  If unsure, say N.

98 99
config SGI_IOC4
	tristate "SGI IOC4 Base IO support"
A
Al Viro 已提交
100
	depends on PCI
101 102 103 104 105 106 107 108 109
	---help---
	  This option enables basic support for the IOC4 chip on certain
	  SGI IO controller cards (IO9, IO10, and PCI-RT).  This option
	  does not enable any specific functions on such a card, but provides
	  necessary infrastructure for other drivers to utilize.

	  If you have an SGI Altix with an IOC4-based card say Y.
	  Otherwise say N.

110 111
config TIFM_CORE
	tristate "TI Flash Media interface support (EXPERIMENTAL)"
112
	depends on EXPERIMENTAL && PCI
113 114 115 116 117 118 119 120 121 122 123 124
	help
	  If you want support for Texas Instruments(R) Flash Media adapters
	  you should select this option and then also choose an appropriate
	  host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter
	  support', if you have a TI PCI74xx compatible card reader, for
	  example.
	  You will also have to select some flash card format drivers. MMC/SD
	  cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD
	  Interface support (MMC_TIFM_SD)'.

          To compile this driver as a module, choose M here: the module will
	  be called tifm_core.
L
Linus Torvalds 已提交
125

126 127 128 129 130 131 132 133 134 135 136 137 138
config TIFM_7XX1
	tristate "TI Flash Media PCI74xx/PCI76xx host adapter support (EXPERIMENTAL)"
	depends on PCI && TIFM_CORE && EXPERIMENTAL
	default TIFM_CORE
	help
	  This option enables support for Texas Instruments(R) PCI74xx and
	  PCI76xx families of Flash Media adapters, found in many laptops.
	  To make actual use of the device, you will have to select some
	  flash card format drivers, as outlined in the TIFM_CORE Help.

          To compile this driver as a module, choose M here: the module will
	  be called tifm_7xx1.

139 140 141 142 143 144
config ACER_WMI
        tristate "Acer WMI Laptop Extras (EXPERIMENTAL)"
	depends on X86
	depends on EXPERIMENTAL
	depends on ACPI
	depends on LEDS_CLASS
145
	depends on NEW_LEDS
146
	depends on BACKLIGHT_CLASS_DEVICE
J
Jiri Kosina 已提交
147
	depends on SERIO_I8042
148
	depends on RFKILL
149
	select ACPI_WMI
150 151 152 153 154
	---help---
	  This is a driver for newer Acer (and Wistron) laptops. It adds
	  wireless radio and bluetooth control, and on some laptops,
	  exposes the mail LED and LCD backlight.

C
Carlos Corbacho 已提交
155 156 157
	  For more information about this driver see
	  <file:Documentation/laptops/acer-wmi.txt>

158 159 160
	  If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
	  here.

C
Corentin Chary 已提交
161 162 163 164 165
config ASUS_LAPTOP
        tristate "Asus Laptop Extras (EXPERIMENTAL)"
        depends on X86
        depends on ACPI
	depends on EXPERIMENTAL && !ACPI_ASUS
C
Corentin Chary 已提交
166
	depends on LEDS_CLASS
167
	depends on NEW_LEDS
168
	depends on BACKLIGHT_CLASS_DEVICE
C
Corentin Chary 已提交
169 170 171 172 173 174 175 176 177 178 179 180
        ---help---
	  This is the new Linux driver for Asus laptops. It may also support some
	  MEDION, JVC or VICTOR laptops. It makes all the extra buttons generate
	  standard ACPI events that go through /proc/acpi/events. It also adds
	  support for video output switching, LCD backlight control, Bluetooth and
	  Wlan control, and most importantly, allows you to blink those fancy LEDs.

	  For more information and a userspace daemon for handling the extra
	  buttons see <http://acpi4asus.sf.net/>.

	  If you have an ACPI-compatible ASUS laptop, say Y or M here.

181 182 183 184
config FUJITSU_LAPTOP
        tristate "Fujitsu Laptop Extras"
        depends on X86
        depends on ACPI
R
Randy Dunlap 已提交
185
	depends on INPUT
186 187 188 189 190 191
        depends on BACKLIGHT_CLASS_DEVICE
        ---help---
	  This is a driver for laptops built by Fujitsu:

	    * P2xxx/P5xxx/S6xxx/S7xxx series Lifebooks
	    * Possibly other Fujitsu laptop models
J
Jonathan Woithe 已提交
192
	    * Tested with S6410 and S7020
193

J
Jonathan Woithe 已提交
194
	  It adds support for LCD brightness control and some hotkeys.
195 196 197

	  If you have a Fujitsu laptop, say Y or M here.

J
Jonathan Woithe 已提交
198 199 200 201 202 203 204 205 206 207
config FUJITSU_LAPTOP_DEBUG
	bool "Verbose debug mode for Fujitsu Laptop Extras"
	depends on FUJITSU_LAPTOP
	default n
	---help---
	  Enables extra debug output from the fujitsu extras driver, at the
	  expense of a slight increase in driver size.

	  If you are not sure, say N here.

208
config TC1100_WMI
209
	tristate "HP Compaq TC1100 Tablet WMI Extras (EXPERIMENTAL)"
210
	depends on X86 && !X86_64
211
	depends on EXPERIMENTAL
212
	depends on ACPI
213
	select ACPI_WMI
214 215 216 217
	---help---
	  This is a driver for the WMI extensions (wireless and bluetooth power
	  control) of the HP Compaq TC1100 tablet.

218 219 220 221 222 223 224 225 226 227 228 229
config HP_WMI
       tristate "HP WMI extras"
       depends on ACPI_WMI
       depends on INPUT
       depends on RFKILL
       help
         Say Y here if you want to support WMI-based hotkeys on HP laptops and
	 to read data from WMI such as docking or ambient light sensor state.

         To compile this driver as a module, choose M here: the module will
         be called hp-wmi.

230 231 232
config MSI_LAPTOP
        tristate "MSI Laptop Extras"
        depends on X86
B
Bjorn Helgaas 已提交
233
        depends on ACPI
234 235 236 237 238 239 240 241 242 243 244 245 246 247 248
        depends on BACKLIGHT_CLASS_DEVICE
        ---help---
	  This is a driver for laptops built by MSI (MICRO-STAR
	  INTERNATIONAL):

	  MSI MegaBook S270 (MS-1013)
	  Cytron/TCM/Medion/Tchibo MD96100/SAM2000

	  It adds support for Bluetooth, WLAN and LCD brightness control.

	  More information about this driver is available at
	  <http://0pointer.de/lennart/tchibo.html>.

	  If you have an MSI S270 laptop, say Y or M here.

249 250
config PANASONIC_LAPTOP
	tristate "Panasonic Laptop Extras"
R
Randy Dunlap 已提交
251
	depends on X86 && INPUT && ACPI
252 253 254 255 256 257 258 259
        depends on BACKLIGHT_CLASS_DEVICE
	---help---
	  This driver adds support for access to backlight control and hotkeys
	  on Panasonic Let's Note laptops.

	  If you have a Panasonic Let's note laptop (such as the R1(N variant),
	  R2, R3, R5, T2, W2 and Y2 series), say Y.

260 261 262
config COMPAL_LAPTOP
	tristate "Compal Laptop Extras"
	depends on X86
B
Bjorn Helgaas 已提交
263
	depends on ACPI
264 265 266 267 268 269 270 271 272 273 274 275 276
	depends on BACKLIGHT_CLASS_DEVICE
	---help---
	  This is a driver for laptops built by Compal:

	  Compal FL90/IFL90
	  Compal FL91/IFL91
	  Compal FL92/JFL92
	  Compal FT00/IFT00

	  It adds support for Bluetooth, WLAN and LCD brightness control.

	  If you have an Compal FL9x/IFL9x/FT00 laptop, say Y or M here.

277 278 279 280
config SONY_LAPTOP
	tristate "Sony Laptop Extras"
	depends on X86 && ACPI
	select BACKLIGHT_CLASS_DEVICE
281
	depends on INPUT
282
	  ---help---
283 284
	  This mini-driver drives the SNC and SPIC devices present in the ACPI
	  BIOS of the Sony Vaio laptops.
285

286 287
	  It gives access to some extra laptop functionalities like Bluetooth,
	  screen brightness control, Fn keys and allows powering on/off some
M
Mattia Dongili 已提交
288
	  devices.
289

290
	  Read <file:Documentation/laptops/sony-laptop.txt> for more information.
291

292
config SONYPI_COMPAT
293 294 295 296 297
	bool "Sonypi compatibility"
	depends on SONY_LAPTOP
	  ---help---
	  Build the sonypi driver compatibility code into the sony-laptop driver.

298 299
config THINKPAD_ACPI
	tristate "ThinkPad ACPI Laptop Extras"
300
	depends on X86 && ACPI
301
	select BACKLIGHT_LCD_SUPPORT
302
	select BACKLIGHT_CLASS_DEVICE
303
	select HWMON
304
	select NVRAM
305
	select INPUT
306 307
	select NEW_LEDS
	select LEDS_CLASS
308 309
	select NET
	select RFKILL
310
	---help---
311
	  This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
312 313
	  support for Fn-Fx key combinations, Bluetooth control, video
	  output switching, ThinkLight control, UltraBay eject and more.
314 315 316
	  For more information about this driver see
	  <file:Documentation/laptops/thinkpad-acpi.txt> and
	  <http://ibm-acpi.sf.net/> .
317

M
Matt LaPlante 已提交
318
	  This driver was formerly known as ibm-acpi.
319

320 321
	  If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.

322 323 324 325 326 327 328 329 330 331
config THINKPAD_ACPI_DEBUG
	bool "Verbose debug mode"
	depends on THINKPAD_ACPI
	default n
	---help---
	  Enables extra debugging information, at the expense of a slightly
	  increase in driver size.

	  If you are not sure, say N here.

332
config THINKPAD_ACPI_DOCK
333
	bool "Legacy Docking Station Support"
334
	depends on THINKPAD_ACPI
335 336 337
	depends on ACPI_DOCK=n
	default n
	---help---
338 339 340 341 342
	  Allows the thinkpad_acpi driver to handle docking station events.
	  This support was made obsolete by the generic ACPI docking station
	  support (CONFIG_ACPI_DOCK).  It will allow locking and removing the
	  laptop from the docking station, but will not properly connect PCI
	  devices.
343 344 345

	  If you are not sure, say N here.

346
config THINKPAD_ACPI_BAY
347
	bool "Legacy Removable Bay Support"
348
	depends on THINKPAD_ACPI
349 350
	default y
	---help---
351
	  Allows the thinkpad_acpi driver to handle removable bays.  It will
M
Matt LaPlante 已提交
352
	  electrically disable the device in the bay, and also generate
353
	  notifications when the bay lever is ejected or inserted.
354 355 356

	  If you are not sure, say Y here.

357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373
config THINKPAD_ACPI_VIDEO
	bool "Video output control support"
	depends on THINKPAD_ACPI
	default y
	---help---
	  Allows the thinkpad_acpi driver to provide an interface to control
	  the various video output ports.

	  This feature often won't work well, depending on ThinkPad model,
	  display state, video output devices in use, whether there is a X
	  server running, phase of the moon, and the current mood of
	  Schroedinger's cat.  If you can use X.org's RandR to control
	  your ThinkPad's video output ports instead of this feature,
	  don't think twice: do it and say N here to save some memory.

	  If you are not sure, say Y here.

374
config THINKPAD_ACPI_HOTKEY_POLL
375
	bool "Support NVRAM polling for hot keys"
376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392
	depends on THINKPAD_ACPI
	default y
	---help---
	  Some thinkpad models benefit from NVRAM polling to detect a few of
	  the hot key press events.  If you know your ThinkPad model does not
	  need to do NVRAM polling to support any of the hot keys you use,
	  unselecting this option will save about 1kB of memory.

	  ThinkPads T40 and newer, R52 and newer, and X31 and newer are
	  unlikely to need NVRAM polling in their latest BIOS versions.

	  NVRAM polling can detect at most the following keys: ThinkPad/Access
	  IBM, Zoom, Switch Display (fn+F7), ThinkLight, Volume up/down/mute,
	  Brightness up/down, Display Expand (fn+F8), Hibernate (fn+F12).

	  If you are not sure, say Y here.  The driver enables polling only if
	  it is strictly necessary to do so.
393

394 395 396 397 398 399 400 401 402 403 404 405
config ATMEL_SSC
	tristate "Device driver for Atmel SSC peripheral"
	depends on AVR32 || ARCH_AT91
	---help---
	  This option enables device driver support for Atmel Syncronized
	  Serial Communication peripheral (SSC).

	  The SSC peripheral supports a wide variety of serial frame based
	  communications, i.e. I2S, SPI, etc.

	  If unsure, say N.

406 407 408
config INTEL_MENLOW
	tristate "Thermal Management driver for Intel menlow platform"
	depends on ACPI_THERMAL
409
	select THERMAL
L
Len Brown 已提交
410
	depends on X86
411 412 413 414 415 416
	---help---
	  ACPI thermal management enhancement driver on
	  Intel Menlow platform.

	  If unsure, say N.

E
Eric Cooper 已提交
417 418 419 420
config EEEPC_LAPTOP
	tristate "Eee PC Hotkey Driver (EXPERIMENTAL)"
	depends on X86
	depends on ACPI
C
Corentin Chary 已提交
421
	depends on BACKLIGHT_CLASS_DEVICE
422
	depends on HWMON
E
Eric Cooper 已提交
423
	depends on EXPERIMENTAL
R
Randy Dunlap 已提交
424
	depends on RFKILL
E
Eric Cooper 已提交
425 426 427 428 429 430
	---help---
	  This driver supports the Fn-Fx keys on Eee PC laptops.
	  It also adds the ability to switch camera/wlan on/off.

	  If you have an Eee PC laptop, say Y or M here.

431 432 433 434 435 436 437 438 439
config ENCLOSURE_SERVICES
	tristate "Enclosure Services"
	default n
	help
	  Provides support for intelligent enclosures (bays which
	  contain storage devices).  You also need either a host
	  driver (SCSI/ATA) which supports enclosures
	  or a SCSI enclosure device (SES) to use these services.

440 441
config SGI_XP
	tristate "Support communication between SGI SSIs"
442
	depends on NET
443
	depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_64) && SMP
444 445
	select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
	select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
446
	select SGI_GRU if (IA64_GENERIC || IA64_SGI_UV || X86_64) && SMP
447 448 449 450 451 452 453
	---help---
	  An SGI machine can be divided into multiple Single System
	  Images which act independently of each other and have
	  hardware based memory protection from the others.  Enabling
	  this feature will allow for direct communication between SSIs
	  based on a network adapter and DMA messaging.

D
David Altobelli 已提交
454 455
config HP_ILO
	tristate "Channel interface driver for HP iLO/iLO2 processor"
456
	depends on PCI
D
David Altobelli 已提交
457 458 459 460 461 462 463 464 465 466 467
	default n
	help
	  The channel interface driver allows applications to communicate
	  with iLO/iLO2 management processors present on HP ProLiant
	  servers.  Upon loading, the driver creates /dev/hpilo/dXccbN files,
	  which can be used to gather data from the management processor,
	  via read and write system calls.

	  To compile this driver as a module, choose M here: the
	  module will be called hpilo.

468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490
config SGI_GRU
	tristate "SGI GRU driver"
	depends on (X86_64 || IA64_SGI_UV || IA64_GENERIC) && SMP
	default n
	select MMU_NOTIFIER
	---help---
	The GRU is a hardware resource located in the system chipset. The GRU
	contains memory that can be mmapped into the user address space. This memory is
	used to communicate with the GRU to perform functions such as load/store,
	scatter/gather, bcopy, AMOs, etc.  The GRU is directly accessed by user
	instructions using user virtual addresses. GRU instructions (ex., bcopy) use
	user virtual addresses for operands.

	If you are not running on a SGI UV system, say N.

config SGI_GRU_DEBUG
	bool  "SGI GRU driver debug"
	depends on SGI_GRU
	default n
	---help---
	This option enables addition debugging code for the SGI GRU driver. If
	you are unsure, say N.

R
Randy Dunlap 已提交
491
endif # MISC_DEVICES