sta_info.h 18.5 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14
/*
 * Copyright 2002-2005, Devicescape Software, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#ifndef STA_INFO_H
#define STA_INFO_H

#include <linux/list.h>
#include <linux/types.h>
#include <linux/if_ether.h>
15
#include <linux/workqueue.h>
16
#include <linux/average.h>
J
Johannes Berg 已提交
17
#include "key.h"
18

19 20 21
/**
 * enum ieee80211_sta_info_flags - Stations flags
 *
J
Johannes Berg 已提交
22 23
 * These flags are used with &struct sta_info's @flags member, but
 * only indirectly with set_sta_flag() and friends.
24 25 26
 *
 * @WLAN_STA_AUTH: Station is authenticated.
 * @WLAN_STA_ASSOC: Station is associated.
27
 * @WLAN_STA_PS_STA: Station is in power-save mode
28 29 30 31 32 33 34
 * @WLAN_STA_AUTHORIZED: Station is authorized to send/receive traffic.
 *	This bit is always checked so needs to be enabled for all stations
 *	when virtual port control is not in use.
 * @WLAN_STA_SHORT_PREAMBLE: Station is capable of receiving short-preamble
 *	frames.
 * @WLAN_STA_WME: Station is a QoS-STA.
 * @WLAN_STA_WDS: Station is one of our WDS peers.
35
 * @WLAN_STA_CLEAR_PS_FILT: Clear PS filter in hardware (using the
36
 *	IEEE80211_TX_CTL_CLEAR_PS_FILT control flag) when the next
37
 *	frame to this station is transmitted.
38
 * @WLAN_STA_MFP: Management frame protection is used with this STA.
39
 * @WLAN_STA_BLOCK_BA: Used to deny ADDBA requests (both TX and RX)
40
 *	during suspend/resume and station removal.
41 42 43 44 45
 * @WLAN_STA_PS_DRIVER: driver requires keeping this station in
 *	power-save mode logically to flush frames that might still
 *	be in the queues
 * @WLAN_STA_PSPOLL: Station sent PS-poll while driver was keeping
 *	station in power-save mode, reply when the driver unblocks.
46 47 48
 * @WLAN_STA_TDLS_PEER: Station is a TDLS peer.
 * @WLAN_STA_TDLS_PEER_AUTH: This TDLS peer is authorized to send direct
 *	packets. This means the link is enabled.
J
Johannes Berg 已提交
49 50 51 52
 * @WLAN_STA_UAPSD: Station requested unscheduled SP while driver was
 *	keeping station in power-save mode, reply when the driver
 *	unblocks the station.
 * @WLAN_STA_SP: Station is in a service period, so don't try to
53
 *	reply to other uAPSD trigger frames or PS-Poll.
54
 * @WLAN_STA_4ADDR_EVENT: 4-addr event was already sent for this frame.
55 56
 */
enum ieee80211_sta_info_flags {
J
Johannes Berg 已提交
57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72
	WLAN_STA_AUTH,
	WLAN_STA_ASSOC,
	WLAN_STA_PS_STA,
	WLAN_STA_AUTHORIZED,
	WLAN_STA_SHORT_PREAMBLE,
	WLAN_STA_WME,
	WLAN_STA_WDS,
	WLAN_STA_CLEAR_PS_FILT,
	WLAN_STA_MFP,
	WLAN_STA_BLOCK_BA,
	WLAN_STA_PS_DRIVER,
	WLAN_STA_PSPOLL,
	WLAN_STA_TDLS_PEER,
	WLAN_STA_TDLS_PEER_AUTH,
	WLAN_STA_UAPSD,
	WLAN_STA_SP,
73
	WLAN_STA_4ADDR_EVENT,
74
};
75

76 77 78 79 80 81 82 83
enum ieee80211_sta_state {
	/* NOTE: These need to be ordered correctly! */
	IEEE80211_STA_NONE,
	IEEE80211_STA_AUTH,
	IEEE80211_STA_ASSOC,
	IEEE80211_STA_AUTHORIZED,
};

84 85
#define STA_TID_NUM 16
#define ADDBA_RESP_INTERVAL HZ
86 87 88
#define HT_AGG_MAX_RETRIES		15
#define HT_AGG_BURST_RETRIES		3
#define HT_AGG_RETRIES_PERIOD		(15 * HZ)
89

90 91 92 93
#define HT_AGG_STATE_DRV_READY		0
#define HT_AGG_STATE_RESPONSE_RECEIVED	1
#define HT_AGG_STATE_OPERATIONAL	2
#define HT_AGG_STATE_STOPPING		3
94 95
#define HT_AGG_STATE_WANT_START		4
#define HT_AGG_STATE_WANT_STOP		5
96 97 98 99

/**
 * struct tid_ampdu_tx - TID aggregation information (Tx).
 *
100
 * @rcu_head: rcu head for freeing structure
101
 * @session_timer: check if we keep Tx-ing on the TID (by timeout value)
102
 * @addba_resp_timer: timer for peer's response to addba request
103
 * @pending: pending frames queue -- use sta's spinlock to protect
104
 * @dialog_token: dialog token for aggregation session
105
 * @timeout: session timeout value to be filled in ADDBA requests
106 107
 * @state: session state (see above)
 * @stop_initiator: initiator of a session stop
108
 * @tx_stop: TX DelBA frame when stopping
109
 * @buf_size: reorder buffer size at receiver
110 111
 * @failed_bar_ssn: ssn of the last failed BAR tx attempt
 * @bar_pending: BAR needs to be re-sent
112
 *
113 114 115 116 117 118 119 120
 * This structure's lifetime is managed by RCU, assignments to
 * the array holding it must hold the aggregation mutex.
 *
 * The TX path can access it under RCU lock-free if, and
 * only if, the state has the flag %HT_AGG_STATE_OPERATIONAL
 * set. Otherwise, the TX path must also acquire the spinlock
 * and re-check the state, see comments in the tx code
 * touching it.
121 122
 */
struct tid_ampdu_tx {
123
	struct rcu_head rcu_head;
124
	struct timer_list session_timer;
125
	struct timer_list addba_resp_timer;
126
	struct sk_buff_head pending;
127
	unsigned long state;
128
	u16 timeout;
129
	u8 dialog_token;
130
	u8 stop_initiator;
131
	bool tx_stop;
132
	u8 buf_size;
133 134 135

	u16 failed_bar_ssn;
	bool bar_pending;
136
};
137 138 139 140 141

/**
 * struct tid_ampdu_rx - TID aggregation information (Rx).
 *
 * @reorder_buf: buffer to reorder incoming aggregated MPDUs
142
 * @reorder_time: jiffies when skb was added
143
 * @session_timer: check if peer keeps Tx-ing on the TID (by timeout value)
144
 * @reorder_timer: releases expired frames from the reorder buffer.
145 146
 * @head_seq_num: head sequence number in reordering buffer.
 * @stored_mpdu_num: number of MPDUs in reordering buffer
147 148
 * @ssn: Starting Sequence Number expected to be aggregated.
 * @buf_size: buffer size for incoming A-MPDUs
149
 * @timeout: reset timer value (in TUs).
150
 * @dialog_token: dialog token for aggregation session
151
 * @rcu_head: RCU head used for freeing this struct
152
 * @reorder_lock: serializes access to reorder buffer, see below.
153
 *
154 155
 * This structure's lifetime is managed by RCU, assignments to
 * the array holding it must hold the aggregation mutex.
156
 *
157 158 159 160
 * The @reorder_lock is used to protect the members of this
 * struct, except for @timeout, @buf_size and @dialog_token,
 * which are constant across the lifetime of the struct (the
 * dialog token being used only for debugging).
161 162
 */
struct tid_ampdu_rx {
163
	struct rcu_head rcu_head;
164
	spinlock_t reorder_lock;
165
	struct sk_buff **reorder_buf;
166
	unsigned long *reorder_time;
167
	struct timer_list session_timer;
168
	struct timer_list reorder_timer;
169 170
	u16 head_seq_num;
	u16 stored_mpdu_num;
171 172 173 174
	u16 ssn;
	u16 buf_size;
	u16 timeout;
	u8 dialog_token;
175 176
};

J
Johannes Berg 已提交
177 178 179
/**
 * struct sta_ampdu_mlme - STA aggregation information.
 *
180
 * @tid_rx: aggregation info for Rx per TID -- RCU protected
J
Johannes Berg 已提交
181
 * @tid_tx: aggregation info for Tx per TID
J
Johannes Berg 已提交
182
 * @tid_start_tx: sessions where start was requested
J
Johannes Berg 已提交
183
 * @addba_req_num: number of times addBA request has been sent.
184
 * @last_addba_req_time: timestamp of the last addBA request.
J
Johannes Berg 已提交
185
 * @dialog_token_allocator: dialog token enumerator for each new session;
186
 * @work: work struct for starting/stopping aggregation
187 188
 * @tid_rx_timer_expired: bitmap indicating on which TIDs the
 *	RX timer expired until the work for it runs
189 190
 * @tid_rx_stop_requested:  bitmap indicating which BA sessions per TID the
 *	driver requested to close until the work for it runs
191 192
 * @mtx: mutex to protect all TX data (except non-NULL assignments
 *	to tid_tx[idx], which are protected by the sta spinlock)
J
Johannes Berg 已提交
193 194
 */
struct sta_ampdu_mlme {
195
	struct mutex mtx;
J
Johannes Berg 已提交
196
	/* rx */
J
Johannes Berg 已提交
197
	struct tid_ampdu_rx __rcu *tid_rx[STA_TID_NUM];
198
	unsigned long tid_rx_timer_expired[BITS_TO_LONGS(STA_TID_NUM)];
199
	unsigned long tid_rx_stop_requested[BITS_TO_LONGS(STA_TID_NUM)];
J
Johannes Berg 已提交
200
	/* tx */
201
	struct work_struct work;
J
Johannes Berg 已提交
202
	struct tid_ampdu_tx __rcu *tid_tx[STA_TID_NUM];
J
Johannes Berg 已提交
203
	struct tid_ampdu_tx *tid_start_tx[STA_TID_NUM];
204
	unsigned long last_addba_req_time[STA_TID_NUM];
J
Johannes Berg 已提交
205 206 207 208 209
	u8 addba_req_num[STA_TID_NUM];
	u8 dialog_token_allocator;
};


210 211 212 213 214 215 216 217 218
/**
 * struct sta_info - STA information
 *
 * This structure collects information about a station that
 * mac80211 is communicating with.
 *
 * @list: global linked list entry
 * @hnext: hash table linked list pointer
 * @local: pointer to the global information
219
 * @sdata: virtual interface this station belongs to
220 221
 * @ptk: peer key negotiated with this station, if any
 * @gtk: group keys negotiated with this station, if any
222 223 224 225
 * @rate_ctrl: rate control algorithm reference
 * @rate_ctrl_priv: rate control private per-STA pointer
 * @last_tx_rate: rate used for last transmit, to report to userspace as
 *	"the" transmit rate
226 227
 * @last_rx_rate_idx: rx status rate index of the last data packet
 * @last_rx_rate_flag: rx status flag of the last data packet
R
Randy Dunlap 已提交
228 229
 * @lock: used for locking all fields that require locking, see comments
 *	in the header file.
230
 * @drv_unblock_wk: used for driver PS unblocking
231
 * @listen_interval: listen interval of this station, when we're acting as AP
J
Johannes Berg 已提交
232
 * @_flags: STA flags, see &enum ieee80211_sta_info_flags, do not use directly
233 234 235 236 237 238 239
 * @ps_tx_buf: buffers (per AC) of frames to transmit to this station
 *	when it leaves power saving state or polls
 * @tx_filtered: buffers (per AC) of frames we already tried to
 *	transmit but were filtered by hardware due to STA having
 *	entered power saving state, these are also delivered to
 *	the station when it leaves powersave or polls for frames
 * @driver_buffered_tids: bitmap of TIDs the driver has data buffered on
240 241
 * @rx_packets: Number of MSDUs received from this STA
 * @rx_bytes: Number of bytes received from this STA
242 243
 * @wep_weak_iv_count: number of weak WEP IVs received from this station
 * @last_rx: time (in jiffies) when last frame was received from this STA
244
 * @last_connected: time (in seconds) when a station got connected
R
Randy Dunlap 已提交
245 246 247 248
 * @num_duplicates: number of duplicate frames received from this STA
 * @rx_fragments: number of received MPDUs
 * @rx_dropped: number of dropped MPDUs from this STA
 * @last_signal: signal of last received frame from this STA
249
 * @avg_signal: moving average of signal of received frames from this STA
R
Randy Dunlap 已提交
250
 * @last_seq_ctrl: last received seq/frag number from this STA (per RX queue)
251 252 253
 * @tx_filtered_count: number of frames the hardware filtered for this STA
 * @tx_retry_failed: number of frames that failed retry
 * @tx_retry_count: total number of retries for frames to this STA
R
Randy Dunlap 已提交
254 255
 * @fail_avg: moving percentage of failed MSDUs
 * @tx_packets: number of RX/TX MSDUs
256
 * @tx_bytes: number of bytes transmitted to this STA
R
Randy Dunlap 已提交
257
 * @tx_fragments: number of transmitted MPDUs
258 259
 * @tid_seq: per-TID sequence numbers for sending to this STA
 * @ampdu_mlme: A-MPDU state machine state
R
Randy Dunlap 已提交
260 261 262 263 264
 * @timer_to_tid: identity mapping to ID timers
 * @llid: Local link ID
 * @plid: Peer link ID
 * @reason: Cancel reason on PLINK_HOLDING state
 * @plink_retries: Retries in establishment
265 266 267 268
 * @ignore_plink_timer: ignore the peer-link timer (used internally)
 * @plink_state: peer link state
 * @plink_timeout: timeout of peer link
 * @plink_timer: peer link watch timer
J
Johannes Berg 已提交
269
 * @plink_timer_was_running: used by suspend/resume to restore timers
R
Randy Dunlap 已提交
270
 * @debugfs: debug filesystem info
271
 * @dead: set to true when sta is unlinked
272
 * @uploaded: set to true when sta is uploaded to the driver
273
 * @lost_packets: number of consecutive lost packets
274 275 276
 * @dummy: indicate a dummy station created for receiving
 *	EAP frames before association
 * @sta: station information we share with the driver
277
 * @sta_state: duplicates information about station state (for debug)
278
 */
279
struct sta_info {
280
	/* General information, mostly static */
281
	struct list_head list;
J
Johannes Berg 已提交
282
	struct sta_info __rcu *hnext;
283
	struct ieee80211_local *local;
284
	struct ieee80211_sub_if_data *sdata;
J
Johannes Berg 已提交
285 286
	struct ieee80211_key __rcu *gtk[NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS];
	struct ieee80211_key __rcu *ptk;
287 288
	struct rate_control_ref *rate_ctrl;
	void *rate_ctrl_priv;
289
	spinlock_t lock;
290

291 292
	struct work_struct drv_unblock_wk;

293
	u16 listen_interval;
294

295 296
	bool dead;

297
	bool uploaded;
298

299 300
	enum ieee80211_sta_state sta_state;

J
Johannes Berg 已提交
301 302
	/* use the accessors defined below */
	unsigned long _flags;
303 304 305 306 307

	/*
	 * STA powersave frame queues, no more than the internal
	 * locking required.
	 */
308 309 310
	struct sk_buff_head ps_tx_buf[IEEE80211_NUM_ACS];
	struct sk_buff_head tx_filtered[IEEE80211_NUM_ACS];
	unsigned long driver_buffered_tids;
311 312 313 314 315

	/* Updated from RX path only, no locking requirements */
	unsigned long rx_packets, rx_bytes;
	unsigned long wep_weak_iv_count;
	unsigned long last_rx;
316
	long last_connected;
R
Randy Dunlap 已提交
317 318 319 320
	unsigned long num_duplicates;
	unsigned long rx_fragments;
	unsigned long rx_dropped;
	int last_signal;
321
	struct ewma avg_signal;
322 323
	/* Plus 1 for non-QoS frames */
	__le16 last_seq_ctrl[NUM_RX_DATA_QUEUES + 1];
324 325 326 327 328 329 330 331

	/* Updated from TX status path only, no locking requirements */
	unsigned long tx_filtered_count;
	unsigned long tx_retry_failed, tx_retry_count;
	/* moving percentage of failed MSDUs */
	unsigned int fail_avg;

	/* Updated from TX path only, no locking requirements */
R
Randy Dunlap 已提交
332
	unsigned long tx_packets;
333
	unsigned long tx_bytes;
R
Randy Dunlap 已提交
334
	unsigned long tx_fragments;
335
	struct ieee80211_tx_rate last_tx_rate;
336 337
	int last_rx_rate_idx;
	int last_rx_rate_flag;
338
	u16 tid_seq[IEEE80211_QOS_CTL_TID_MASK + 1];
339

340
	/*
341
	 * Aggregation information, locked with lock.
342
	 */
343
	struct sta_ampdu_mlme ampdu_mlme;
R
Randy Dunlap 已提交
344
	u8 timer_to_tid[STA_TID_NUM];
345

346
#ifdef CONFIG_MAC80211_MESH
347 348 349 350
	/*
	 * Mesh peer link attributes
	 * TODO: move to a sub-structure that is referenced with pointer?
	 */
R
Randy Dunlap 已提交
351 352 353 354
	__le16 llid;
	__le16 plid;
	__le16 reason;
	u8 plink_retries;
355
	bool ignore_plink_timer;
356
	bool plink_timer_was_running;
357
	enum nl80211_plink_state plink_state;
358 359 360
	u32 plink_timeout;
	struct timer_list plink_timer;
#endif
361

J
Jiri Benc 已提交
362 363 364
#ifdef CONFIG_MAC80211_DEBUGFS
	struct sta_info_debugfsdentries {
		struct dentry *dir;
J
Johannes Berg 已提交
365
		bool add_has_run;
J
Jiri Benc 已提交
366 367
	} debugfs;
#endif
368

369 370
	unsigned int lost_packets;

371 372 373
	/* should be right in front of sta to be in the same cache line */
	bool dummy;

374 375
	/* keep last! */
	struct ieee80211_sta sta;
376 377
};

378
static inline enum nl80211_plink_state sta_plink_state(struct sta_info *sta)
379 380 381 382
{
#ifdef CONFIG_MAC80211_MESH
	return sta->plink_state;
#endif
383
	return NL80211_PLINK_LISTEN;
384 385
}

J
Johannes Berg 已提交
386 387
static inline void set_sta_flag(struct sta_info *sta,
				enum ieee80211_sta_info_flags flag)
388
{
389 390 391
	WARN_ON(flag == WLAN_STA_AUTH ||
		flag == WLAN_STA_ASSOC ||
		flag == WLAN_STA_AUTHORIZED);
J
Johannes Berg 已提交
392
	set_bit(flag, &sta->_flags);
393 394
}

J
Johannes Berg 已提交
395 396
static inline void clear_sta_flag(struct sta_info *sta,
				  enum ieee80211_sta_info_flags flag)
397
{
398 399 400
	WARN_ON(flag == WLAN_STA_AUTH ||
		flag == WLAN_STA_ASSOC ||
		flag == WLAN_STA_AUTHORIZED);
J
Johannes Berg 已提交
401
	clear_bit(flag, &sta->_flags);
402 403
}

J
Johannes Berg 已提交
404 405
static inline int test_sta_flag(struct sta_info *sta,
				enum ieee80211_sta_info_flags flag)
406
{
J
Johannes Berg 已提交
407
	return test_bit(flag, &sta->_flags);
408 409
}

J
Johannes Berg 已提交
410 411
static inline int test_and_clear_sta_flag(struct sta_info *sta,
					  enum ieee80211_sta_info_flags flag)
412
{
413 414 415
	WARN_ON(flag == WLAN_STA_AUTH ||
		flag == WLAN_STA_ASSOC ||
		flag == WLAN_STA_AUTHORIZED);
J
Johannes Berg 已提交
416
	return test_and_clear_bit(flag, &sta->_flags);
417 418
}

419 420 421
static inline int test_and_set_sta_flag(struct sta_info *sta,
					enum ieee80211_sta_info_flags flag)
{
422 423 424
	WARN_ON(flag == WLAN_STA_AUTH ||
		flag == WLAN_STA_ASSOC ||
		flag == WLAN_STA_AUTHORIZED);
425 426 427
	return test_and_set_bit(flag, &sta->_flags);
}

428 429 430 431 432 433 434 435 436 437 438
int sta_info_move_state_checked(struct sta_info *sta,
				enum ieee80211_sta_state new_state);

static inline void sta_info_move_state(struct sta_info *sta,
				       enum ieee80211_sta_state new_state)
{
	int ret = sta_info_move_state_checked(sta, new_state);
	WARN_ON_ONCE(ret);
}


J
Johannes Berg 已提交
439 440
void ieee80211_assign_tid_tx(struct sta_info *sta, int tid,
			     struct tid_ampdu_tx *tid_tx);
441

J
Johannes Berg 已提交
442 443 444 445 446 447 448
static inline struct tid_ampdu_tx *
rcu_dereference_protected_tid_tx(struct sta_info *sta, int tid)
{
	return rcu_dereference_protected(sta->ampdu_mlme.tid_tx[tid],
					 lockdep_is_held(&sta->lock) ||
					 lockdep_is_held(&sta->ampdu_mlme.mtx));
}
449 450 451 452 453

#define STA_HASH_SIZE 256
#define STA_HASH(sta) (sta[5])


454 455
/* Maximum number of frames to buffer per power saving station per AC */
#define STA_MAX_TX_BUFFER	64
456 457 458 459 460 461 462 463 464

/* Minimum buffered frame expiry time. If STA uses listen interval that is
 * smaller than this value, the minimum value here is used instead. */
#define STA_TX_BUFFER_EXPIRE (10 * HZ)

/* How often station data is cleaned up (e.g., expiration of buffered frames)
 */
#define STA_INFO_CLEANUP_INTERVAL (10 * HZ)

465
/*
466
 * Get a STA info, must be under RCU read lock.
467
 */
468 469 470
struct sta_info *sta_info_get(struct ieee80211_sub_if_data *sdata,
			      const u8 *addr);

471 472 473
struct sta_info *sta_info_get_rx(struct ieee80211_sub_if_data *sdata,
			      const u8 *addr);

474 475 476
struct sta_info *sta_info_get_bss(struct ieee80211_sub_if_data *sdata,
				  const u8 *addr);

477 478 479
struct sta_info *sta_info_get_bss_rx(struct ieee80211_sub_if_data *sdata,
				  const u8 *addr);

480 481 482 483 484 485 486 487
static inline
void for_each_sta_info_type_check(struct ieee80211_local *local,
				  const u8 *addr,
				  struct sta_info *sta,
				  struct sta_info *nxt)
{
}

488
#define for_each_sta_info(local, _addr, _sta, nxt) 			\
489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504
	for (	/* initialise loop */					\
		_sta = rcu_dereference(local->sta_hash[STA_HASH(_addr)]),\
		nxt = _sta ? rcu_dereference(_sta->hnext) : NULL;	\
		/* typecheck */						\
		for_each_sta_info_type_check(local, (_addr), _sta, nxt),\
		/* continue condition */				\
		_sta;							\
		/* advance loop */					\
		_sta = nxt,						\
		nxt = _sta ? rcu_dereference(_sta->hnext) : NULL	\
	     )								\
	/* run code only if address matches and it's not a dummy sta */	\
	if (memcmp(_sta->sta.addr, (_addr), ETH_ALEN) == 0 &&		\
		!_sta->dummy)

#define for_each_sta_info_rx(local, _addr, _sta, nxt)			\
505
	for (	/* initialise loop */					\
506 507
		_sta = rcu_dereference(local->sta_hash[STA_HASH(_addr)]),\
		nxt = _sta ? rcu_dereference(_sta->hnext) : NULL;	\
508
		/* typecheck */						\
509
		for_each_sta_info_type_check(local, (_addr), _sta, nxt),\
510
		/* continue condition */				\
511
		_sta;							\
512
		/* advance loop */					\
513 514
		_sta = nxt,						\
		nxt = _sta ? rcu_dereference(_sta->hnext) : NULL	\
515 516
	     )								\
	/* compare address and run code only if it matches */		\
517
	if (memcmp(_sta->sta.addr, (_addr), ETH_ALEN) == 0)
518

519 520 521
/*
 * Get STA info by index, BROKEN!
 */
522 523
struct sta_info *sta_info_get_by_idx(struct ieee80211_sub_if_data *sdata,
				     int idx);
524
/*
J
Johannes Berg 已提交
525 526
 * Create a new STA info, caller owns returned structure
 * until sta_info_insert().
527
 */
J
Johannes Berg 已提交
528
struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
529
				const u8 *addr, gfp_t gfp);
530 531 532

void sta_info_free(struct ieee80211_local *local, struct sta_info *sta);

J
Johannes Berg 已提交
533 534 535 536
/*
 * Insert STA info into hash table/list, returns zero or a
 * -EEXIST if (if the same MAC address is already present).
 *
537 538 539
 * Calling the non-rcu version makes the caller relinquish,
 * the _rcu version calls read_lock_rcu() and must be called
 * without it held.
J
Johannes Berg 已提交
540 541
 */
int sta_info_insert(struct sta_info *sta);
542
int sta_info_insert_rcu(struct sta_info *sta) __acquires(RCU);
543
int sta_info_reinsert(struct sta_info *sta);
544 545 546 547 548

int sta_info_destroy_addr(struct ieee80211_sub_if_data *sdata,
			  const u8 *addr);
int sta_info_destroy_addr_bss(struct ieee80211_sub_if_data *sdata,
			      const u8 *addr);
549

J
Johannes Berg 已提交
550
void sta_info_recalc_tim(struct sta_info *sta);
551

552 553
void sta_info_init(struct ieee80211_local *local);
void sta_info_stop(struct ieee80211_local *local);
554
int sta_info_flush(struct ieee80211_local *local,
555
		   struct ieee80211_sub_if_data *sdata);
556 557
void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata,
			  unsigned long exp_time);
558

559 560
void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta);
void ieee80211_sta_ps_deliver_poll_response(struct sta_info *sta);
J
Johannes Berg 已提交
561
void ieee80211_sta_ps_deliver_uapsd(struct sta_info *sta);
562

563
#endif /* STA_INFO_H */