beacon.c 21.5 KB
Newer Older
1
/*
2
 * Copyright (c) 2008-2011 Atheros Communications Inc.
3 4 5 6 7 8 9 10 11 12 13 14 15 16
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

17
#include <linux/dma-mapping.h>
S
Sujith 已提交
18
#include "ath9k.h"
19

20 21
#define FUDGE 2

22 23 24 25 26 27
static void ath9k_reset_beacon_status(struct ath_softc *sc)
{
	sc->beacon.tx_processed = false;
	sc->beacon.tx_last = false;
}

28 29 30 31 32
/*
 *  This function will modify certain transmit queue properties depending on
 *  the operating mode of the station (AP or AdHoc).  Parameters are AIFS
 *  settings and channel width min/max
*/
33
int ath_beaconq_config(struct ath_softc *sc)
34
{
35
	struct ath_hw *ah = sc->sc_ah;
36
	struct ath_common *common = ath9k_hw_common(ah);
37
	struct ath9k_tx_queue_info qi, qi_be;
38
	struct ath_txq *txq;
39

S
Sujith 已提交
40
	ath9k_hw_get_txq_props(ah, sc->beacon.beaconq, &qi);
41
	if (sc->sc_ah->opmode == NL80211_IFTYPE_AP) {
42 43 44 45 46 47
		/* Always burst out beacon and CAB traffic. */
		qi.tqi_aifs = 1;
		qi.tqi_cwmin = 0;
		qi.tqi_cwmax = 0;
	} else {
		/* Adhoc mode; important thing is to use 2x cwmin. */
48 49
		txq = sc->tx.txq_map[WME_AC_BE];
		ath9k_hw_get_txq_props(ah, txq->axq_qnum, &qi_be);
50
		qi.tqi_aifs = qi_be.tqi_aifs;
51 52 53 54
		if (ah->slottime == ATH9K_SLOT_TIME_20)
			qi.tqi_cwmin = 2*qi_be.tqi_cwmin;
		else
			qi.tqi_cwmin = 4*qi_be.tqi_cwmin;
55
		qi.tqi_cwmax = qi_be.tqi_cwmax;
56 57
	}

S
Sujith 已提交
58
	if (!ath9k_hw_set_txq_props(ah, sc->beacon.beaconq, &qi)) {
59 60
		ath_err(common,
			"Unable to update h/w beacon queue parameters\n");
61 62
		return 0;
	} else {
S
Sujith 已提交
63
		ath9k_hw_resettxqueue(ah, sc->beacon.beaconq);
64 65 66 67 68 69
		return 1;
	}
}

/*
 *  Associates the beacon frame buffer with a transmit descriptor.  Will set
70 71
 *  up rate codes, and channel flags. Beacons are always sent out at the
 *  lowest rate, and are not retried.
72
*/
73
static void ath_beacon_setup(struct ath_softc *sc, struct ieee80211_vif *vif,
74
			     struct ath_buf *bf, int rateidx)
75
{
S
Sujith 已提交
76
	struct sk_buff *skb = bf->bf_mpdu;
77
	struct ath_hw *ah = sc->sc_ah;
78
	struct ath_common *common = ath9k_hw_common(ah);
79
	struct ath_tx_info info;
80
	struct ieee80211_supported_band *sband;
81
	u8 chainmask = ah->txchainmask;
82
	u8 rate = 0;
83

84 85
	ath9k_reset_beacon_status(sc);

86
	sband = &sc->sbands[common->hw->conf.channel->band];
87
	rate = sband->bitrates[rateidx].hw_value;
88
	if (vif->bss_conf.use_short_preamble)
89
		rate |= sband->bitrates[rateidx].hw_value_short;
S
Sujith 已提交
90

91 92 93 94 95 96
	memset(&info, 0, sizeof(info));
	info.pkt_len = skb->len + FCS_LEN;
	info.type = ATH9K_PKT_TYPE_BEACON;
	info.txpower = MAX_RATE_POWER;
	info.keyix = ATH9K_TXKEYIX_INVALID;
	info.keytype = ATH9K_KEY_TYPE_CLEAR;
97
	info.flags = ATH9K_TXDESC_NOACK | ATH9K_TXDESC_CLRDMASK;
98 99 100 101 102 103 104 105 106 107 108 109 110 111

	info.buf_addr[0] = bf->bf_buf_addr;
	info.buf_len[0] = roundup(skb->len, 4);

	info.is_first = true;
	info.is_last = true;

	info.qcu = sc->beacon.beaconq;

	info.rates[0].Tries = 1;
	info.rates[0].Rate = rate;
	info.rates[0].ChSel = ath_txchainmask_reduction(sc, chainmask, rate);

	ath9k_hw_set_txdesc(ah, bf->bf_desc, &info);
112 113
}

114 115
static void ath_tx_cabq(struct ieee80211_hw *hw, struct sk_buff *skb)
{
116
	struct ath_softc *sc = hw->priv;
117 118 119 120 121 122
	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
	struct ath_tx_control txctl;

	memset(&txctl, 0, sizeof(struct ath_tx_control));
	txctl.txq = sc->beacon.cabq;

123
	ath_dbg(common, XMIT, "transmitting CABQ packet, skb: %p\n", skb);
124 125

	if (ath_tx_start(hw, skb, &txctl) != 0) {
126
		ath_dbg(common, XMIT, "CABQ TX failed\n");
127 128 129 130
		dev_kfree_skb_any(skb);
	}
}

131
static struct ath_buf *ath_beacon_generate(struct ieee80211_hw *hw,
132
					   struct ieee80211_vif *vif)
133
{
134
	struct ath_softc *sc = hw->priv;
135
	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
136
	struct ath_buf *bf;
S
Sujith 已提交
137
	struct ath_vif *avp;
138 139
	struct sk_buff *skb;
	struct ath_txq *cabq;
140
	struct ieee80211_tx_info *info;
S
Sujith 已提交
141 142
	int cabq_depth;

143 144
	ath9k_reset_beacon_status(sc);

S
Sujith 已提交
145
	avp = (void *)vif->drv_priv;
S
Sujith 已提交
146
	cabq = sc->beacon.cabq;
147

148
	if ((avp->av_bcbuf == NULL) || !avp->is_bslot_active)
149
		return NULL;
S
Sujith 已提交
150

S
Sujith 已提交
151 152
	/* Release the old beacon first */

153
	bf = avp->av_bcbuf;
S
Sujith 已提交
154
	skb = bf->bf_mpdu;
155
	if (skb) {
B
Ben Greear 已提交
156
		dma_unmap_single(sc->dev, bf->bf_buf_addr,
S
Sujith 已提交
157
				 skb->len, DMA_TO_DEVICE);
J
Jouni Malinen 已提交
158
		dev_kfree_skb_any(skb);
159
		bf->bf_buf_addr = 0;
160
	}
161

S
Sujith 已提交
162 163
	/* Get a new beacon from mac80211 */

164
	skb = ieee80211_beacon_get(hw, vif);
165 166 167
	bf->bf_mpdu = skb;
	if (skb == NULL)
		return NULL;
168 169
	((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp =
		avp->tsf_adjust;
S
Sujith 已提交
170

171 172 173 174 175 176
	info = IEEE80211_SKB_CB(skb);
	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
		/*
		 * TODO: make sure the seq# gets assigned properly (vs. other
		 * TX frames)
		 */
S
Sujith 已提交
177
		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
S
Sujith 已提交
178
		sc->tx.seq_no += 0x10;
179
		hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
S
Sujith 已提交
180
		hdr->seq_ctrl |= cpu_to_le16(sc->tx.seq_no);
181
	}
S
Sujith 已提交
182

B
Ben Greear 已提交
183 184
	bf->bf_buf_addr = dma_map_single(sc->dev, skb->data,
					 skb->len, DMA_TO_DEVICE);
185
	if (unlikely(dma_mapping_error(sc->dev, bf->bf_buf_addr))) {
186 187
		dev_kfree_skb_any(skb);
		bf->bf_mpdu = NULL;
188
		bf->bf_buf_addr = 0;
189
		ath_err(common, "dma_mapping_error on beaconing\n");
190 191
		return NULL;
	}
192

193
	skb = ieee80211_get_buffered_bc(hw, vif);
194 195 196 197

	/*
	 * if the CABQ traffic from previous DTIM is pending and the current
	 *  beacon is also a DTIM.
S
Sujith 已提交
198 199
	 *  1) if there is only one vif let the cab traffic continue.
	 *  2) if there are more than one vif and we are using staggered
200
	 *     beacons, then drain the cabq by dropping all the frames in
S
Sujith 已提交
201
	 *     the cabq so that the current vifs cab traffic can be scheduled.
202 203 204 205 206
	 */
	spin_lock_bh(&cabq->axq_lock);
	cabq_depth = cabq->axq_depth;
	spin_unlock_bh(&cabq->axq_lock);

207
	if (skb && cabq_depth) {
S
Sujith 已提交
208
		if (sc->nvifs > 1) {
209
			ath_dbg(common, BEACON,
J
Joe Perches 已提交
210
				"Flushing previous cabq traffic\n");
S
Sujith 已提交
211
			ath_draintxq(sc, cabq, false);
212 213 214
		}
	}

215
	ath_beacon_setup(sc, vif, bf, info->control.rates[0].idx);
216

217
	while (skb) {
218 219
		ath_tx_cabq(hw, skb);
		skb = ieee80211_get_buffered_bc(hw, vif);
220
	}
221 222 223 224

	return bf;
}

S
Sujith Manoharan 已提交
225
void ath9k_beacon_assign_slot(struct ath_softc *sc, struct ieee80211_vif *vif)
226
{
227
	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
S
Sujith Manoharan 已提交
228 229
	struct ath_vif *avp = (void *)vif->drv_priv;
	int slot;
230

S
Sujith Manoharan 已提交
231 232
	avp->av_bcbuf = list_first_entry(&sc->beacon.bbuf, struct ath_buf, list);
	list_del(&avp->av_bcbuf->list);
233

S
Sujith Manoharan 已提交
234 235 236 237 238
	for (slot = 0; slot < ATH_BCBUF; slot++) {
		if (sc->beacon.bslot[slot] == NULL) {
			avp->av_bslot = slot;
			avp->is_bslot_active = false;
			break;
239 240 241
		}
	}

S
Sujith Manoharan 已提交
242 243
	sc->beacon.bslot[avp->av_bslot] = vif;
	sc->nbcnvifs++;
244

S
Sujith Manoharan 已提交
245 246 247
	ath_dbg(common, CONFIG, "Added interface at beacon slot: %d\n",
		avp->av_bslot);
}
248

S
Sujith Manoharan 已提交
249 250 251 252 253
void ath9k_beacon_remove_slot(struct ath_softc *sc, struct ieee80211_vif *vif)
{
	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
	struct ath_vif *avp = (void *)vif->drv_priv;
	struct ath_buf *bf = avp->av_bcbuf;
254

S
Sujith Manoharan 已提交
255 256
	ath_dbg(common, CONFIG, "Removing interface at beacon slot: %d\n",
		avp->av_bslot);
257

S
Sujith Manoharan 已提交
258
	tasklet_disable(&sc->bcon_tasklet);
259

S
Sujith Manoharan 已提交
260 261 262 263
	if (bf && bf->bf_mpdu) {
		struct sk_buff *skb = bf->bf_mpdu;
		dma_unmap_single(sc->dev, bf->bf_buf_addr,
				 skb->len, DMA_TO_DEVICE);
264 265
		dev_kfree_skb_any(skb);
		bf->bf_mpdu = NULL;
266
		bf->bf_buf_addr = 0;
267
	}
268

S
Sujith Manoharan 已提交
269 270 271 272 273
	avp->av_bcbuf = NULL;
	avp->is_bslot_active = false;
	sc->beacon.bslot[avp->av_bslot] = NULL;
	sc->nbcnvifs--;
	list_add_tail(&bf->list, &sc->beacon.bbuf);
274

S
Sujith Manoharan 已提交
275
	tasklet_enable(&sc->bcon_tasklet);
276 277
}

S
Sujith 已提交
278
void ath_beacon_tasklet(unsigned long data)
279 280
{
	struct ath_softc *sc = (struct ath_softc *)data;
281
	struct ath_beacon_config *cur_conf = &sc->cur_beacon_conf;
282
	struct ath_hw *ah = sc->sc_ah;
283
	struct ath_common *common = ath9k_hw_common(ah);
284
	struct ath_buf *bf = NULL;
285
	struct ieee80211_vif *vif;
286
	bool edma = !!(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA);
287
	int slot;
288
	u32 bfaddr, bc = 0;
289

290 291 292 293 294
	if (work_pending(&sc->hw_reset_work)) {
		ath_dbg(common, RESET,
			"reset work is pending, skip beaconing now\n");
		return;
	}
295 296 297 298 299 300 301
	/*
	 * Check if the previous beacon has gone out.  If
	 * not don't try to post another, skip this period
	 * and wait for the next.  Missed beacons indicate
	 * a problem and should not occur.  If we miss too
	 * many consecutive beacons reset the device.
	 */
S
Sujith 已提交
302 303
	if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0) {
		sc->beacon.bmisscnt++;
S
Sujith 已提交
304

305 306 307
		if (!ath9k_hw_check_alive(ah))
			ieee80211_queue_work(sc->hw, &sc->hw_check_work);

308
		if (sc->beacon.bmisscnt < BSTUCK_THRESH * sc->nbcnvifs) {
309
			ath_dbg(common, BSTUCK,
J
Joe Perches 已提交
310 311
				"missed %u consecutive beacons\n",
				sc->beacon.bmisscnt);
312
			ath9k_hw_stop_dma_queue(ah, sc->beacon.beaconq);
313 314
			if (sc->beacon.bmisscnt > 3)
				ath9k_hw_bstuck_nfcal(ah);
S
Sujith 已提交
315
		} else if (sc->beacon.bmisscnt >= BSTUCK_THRESH) {
316
			ath_dbg(common, BSTUCK, "beacon is officially stuck\n");
317
			sc->beacon.bmisscnt = 0;
S
Sujith Manoharan 已提交
318
			set_bit(SC_OP_TSF_RESET, &sc->sc_flags);
319
			ieee80211_queue_work(sc->hw, &sc->hw_reset_work);
320
		}
S
Sujith 已提交
321

322 323
		return;
	}
S
Sujith 已提交
324

325 326 327 328 329 330 331
	/*
	 * Generate beacon frames. we are sending frames
	 * staggered so calculate the slot for this frame based
	 * on the tsf to safeguard against missing an swba.
	 */


332 333 334 335 336 337 338 339 340 341 342 343
	if (ah->opmode == NL80211_IFTYPE_AP) {
		u16 intval;
		u32 tsftu;
		u64 tsf;

		intval = cur_conf->beacon_interval ? : ATH_DEFAULT_BINTVAL;
		tsf = ath9k_hw_gettsf64(ah);
		tsf += TU_TO_USEC(ah->config.sw_beacon_response_time);
		tsftu = TSF_TO_TU((tsf * ATH_BCBUF) >>32, tsf * ATH_BCBUF);
		slot = (tsftu % (intval * ATH_BCBUF)) / intval;
		vif = sc->beacon.bslot[slot];

344
		ath_dbg(common, BEACON,
345 346 347 348 349 350
			"slot %d [tsf %llu tsftu %u intval %u] vif %p\n",
			slot, tsf, tsftu / ATH_BCBUF, intval, vif);
	} else {
		slot = 0;
		vif = sc->beacon.bslot[slot];
	}
S
Sujith 已提交
351 352


353
	bfaddr = 0;
354
	if (vif) {
355
		bf = ath_beacon_generate(sc->hw, vif);
356 357 358 359
		if (bf != NULL) {
			bfaddr = bf->bf_daddr;
			bc = 1;
		}
360 361

		if (sc->beacon.bmisscnt != 0) {
362
			ath_dbg(common, BSTUCK,
363 364 365 366
				"resume beacon xmit after %u misses\n",
				sc->beacon.bmisscnt);
			sc->beacon.bmisscnt = 0;
		}
367
	}
S
Sujith 已提交
368

369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384
	/*
	 * Handle slot time change when a non-ERP station joins/leaves
	 * an 11g network.  The 802.11 layer notifies us via callback,
	 * we mark updateslot, then wait one beacon before effecting
	 * the change.  This gives associated stations at least one
	 * beacon interval to note the state change.
	 *
	 * NB: The slot time change state machine is clocked according
	 *     to whether we are bursting or staggering beacons.  We
	 *     recognize the request to update and record the current
	 *     slot then don't transition until that slot is reached
	 *     again.  If we miss a beacon for that slot then we'll be
	 *     slow to transition but we'll be sure at least one beacon
	 *     interval has passed.  When bursting slot is always left
	 *     set to ATH_BCBUF so this check is a noop.
	 */
S
Sujith 已提交
385 386 387 388
	if (sc->beacon.updateslot == UPDATE) {
		sc->beacon.updateslot = COMMIT; /* commit next beacon */
		sc->beacon.slotupdate = slot;
	} else if (sc->beacon.updateslot == COMMIT && sc->beacon.slotupdate == slot) {
389 390
		ah->slottime = sc->beacon.slottime;
		ath9k_hw_init_global_settings(ah);
S
Sujith 已提交
391
		sc->beacon.updateslot = OK;
S
Sujith 已提交
392
	}
393 394
	if (bfaddr != 0) {
		/* NB: cabq traffic should already be queued and primed */
S
Sujith 已提交
395
		ath9k_hw_puttxbuf(ah, sc->beacon.beaconq, bfaddr);
396 397 398

		if (!edma)
			ath9k_hw_txstart(ah, sc->beacon.beaconq);
399

S
Sujith 已提交
400
		sc->beacon.ast_be_xmit += bc;     /* XXX per-vif? */
401 402 403
	}
}

404 405 406 407
static void ath9k_beacon_init(struct ath_softc *sc,
			      u32 next_beacon,
			      u32 beacon_period)
{
S
Sujith Manoharan 已提交
408
	if (test_bit(SC_OP_TSF_RESET, &sc->sc_flags)) {
409
		ath9k_ps_wakeup(sc);
410 411
		ath9k_hw_reset_tsf(sc->sc_ah);
	}
412 413 414

	ath9k_hw_beaconinit(sc->sc_ah, next_beacon, beacon_period);

S
Sujith Manoharan 已提交
415
	if (test_bit(SC_OP_TSF_RESET, &sc->sc_flags)) {
416
		ath9k_ps_restore(sc);
S
Sujith Manoharan 已提交
417
		clear_bit(SC_OP_TSF_RESET, &sc->sc_flags);
418
	}
419 420
}

421
/*
422 423 424
 * For multi-bss ap support beacons are either staggered evenly over N slots or
 * burst together.  For the former arrange for the SWBA to be delivered for each
 * slot. Slots that are not occupied will generate nothing.
425
 */
426
static void ath_beacon_config_ap(struct ath_softc *sc,
427
				 struct ath_beacon_config *conf)
428
{
P
Pavel Roskin 已提交
429
	struct ath_hw *ah = sc->sc_ah;
S
Sujith 已提交
430
	u32 nexttbtt, intval;
431

432
	/* NB: the beacon interval is kept internally in TU's */
433
	intval = TU_TO_USEC(conf->beacon_interval);
434 435
	intval /= ATH_BCBUF;    /* for staggered beacons */
	nexttbtt = intval;
436

437 438 439 440
	/*
	 * In AP mode we enable the beacon timers and SWBA interrupts to
	 * prepare beacon frames.
	 */
P
Pavel Roskin 已提交
441
	ah->imask |= ATH9K_INT_SWBA;
442
	ath_beaconq_config(sc);
443

444
	/* Set the computed AP beacon timers */
445

446
	ath9k_hw_disable_interrupts(ah);
S
Sujith Manoharan 已提交
447
	set_bit(SC_OP_TSF_RESET, &sc->sc_flags);
448
	ath9k_beacon_init(sc, nexttbtt, intval);
449
	sc->beacon.bmisscnt = 0;
450
	ath9k_hw_set_interrupts(ah);
451
	ath9k_hw_enable_interrupts(ah);
452
}
S
Sujith 已提交
453

454 455 456 457 458 459 460 461 462
/*
 * This sets up the beacon timers according to the timestamp of the last
 * received beacon and the current TSF, configures PCF and DTIM
 * handling, programs the sleep registers so the hardware will wakeup in
 * time to receive beacons, and configures the beacon miss handling so
 * we'll receive a BMISS interrupt when we stop seeing beacons from the AP
 * we've associated with.
 */
static void ath_beacon_config_sta(struct ath_softc *sc,
463
				  struct ath_beacon_config *conf)
464
{
P
Pavel Roskin 已提交
465 466
	struct ath_hw *ah = sc->sc_ah;
	struct ath_common *common = ath9k_hw_common(ah);
467 468 469 470 471
	struct ath9k_beacon_state bs;
	int dtimperiod, dtimcount, sleepduration;
	int cfpperiod, cfpcount;
	u32 nexttbtt = 0, intval, tsftu;
	u64 tsf;
472
	int num_beacons, offset, dtim_dec_count, cfp_dec_count;
473

474
	/* No need to configure beacon if we are not associated */
475
	if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) {
476
		ath_dbg(common, BEACON,
J
Joe Perches 已提交
477
			"STA is not yet associated..skipping beacon config\n");
478 479 480
		return;
	}

481
	memset(&bs, 0, sizeof(bs));
482
	intval = conf->beacon_interval;
483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500

	/*
	 * Setup dtim and cfp parameters according to
	 * last beacon we received (which may be none).
	 */
	dtimperiod = conf->dtim_period;
	dtimcount = conf->dtim_count;
	if (dtimcount >= dtimperiod)	/* NB: sanity check */
		dtimcount = 0;
	cfpperiod = 1;			/* NB: no PCF support yet */
	cfpcount = 0;

	sleepduration = conf->listen_interval * intval;

	/*
	 * Pull nexttbtt forward to reflect the current
	 * TSF and calculate dtim+cfp state for the result.
	 */
P
Pavel Roskin 已提交
501
	tsf = ath9k_hw_gettsf64(ah);
502
	tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE;
503 504 505 506 507

	num_beacons = tsftu / intval + 1;
	offset = tsftu % intval;
	nexttbtt = tsftu - offset;
	if (offset)
508
		nexttbtt += intval;
509 510 511 512 513 514 515 516 517 518 519 520 521 522 523

	/* DTIM Beacon every dtimperiod Beacon */
	dtim_dec_count = num_beacons % dtimperiod;
	/* CFP every cfpperiod DTIM Beacon */
	cfp_dec_count = (num_beacons / dtimperiod) % cfpperiod;
	if (dtim_dec_count)
		cfp_dec_count++;

	dtimcount -= dtim_dec_count;
	if (dtimcount < 0)
		dtimcount += dtimperiod;

	cfpcount -= cfp_dec_count;
	if (cfpcount < 0)
		cfpcount += cfpperiod;
524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541

	bs.bs_intval = intval;
	bs.bs_nexttbtt = nexttbtt;
	bs.bs_dtimperiod = dtimperiod*intval;
	bs.bs_nextdtim = bs.bs_nexttbtt + dtimcount*intval;
	bs.bs_cfpperiod = cfpperiod*bs.bs_dtimperiod;
	bs.bs_cfpnext = bs.bs_nextdtim + cfpcount*bs.bs_dtimperiod;
	bs.bs_cfpmaxduration = 0;

	/*
	 * Calculate the number of consecutive beacons to miss* before taking
	 * a BMISS interrupt. The configuration is specified in TU so we only
	 * need calculate based	on the beacon interval.  Note that we clamp the
	 * result to at most 15 beacons.
	 */
	if (sleepduration > intval) {
		bs.bs_bmissthreshold = conf->listen_interval *
			ATH_DEFAULT_BMISS_LIMIT / 2;
542
	} else {
543 544 545 546 547
		bs.bs_bmissthreshold = DIV_ROUND_UP(conf->bmiss_timeout, intval);
		if (bs.bs_bmissthreshold > 15)
			bs.bs_bmissthreshold = 15;
		else if (bs.bs_bmissthreshold <= 0)
			bs.bs_bmissthreshold = 1;
548 549
	}

550 551 552 553 554 555 556 557
	/*
	 * Calculate sleep duration. The configuration is given in ms.
	 * We ensure a multiple of the beacon period is used. Also, if the sleep
	 * duration is greater than the DTIM period then it makes senses
	 * to make it a multiple of that.
	 *
	 * XXX fixed at 100ms
	 */
S
Sujith 已提交
558

559 560 561
	bs.bs_sleepduration = roundup(IEEE80211_MS_TO_TU(100), sleepduration);
	if (bs.bs_sleepduration > bs.bs_dtimperiod)
		bs.bs_sleepduration = bs.bs_dtimperiod;
S
Sujith 已提交
562

563 564
	/* TSF out of range threshold fixed at 1 second */
	bs.bs_tsfoor_threshold = ATH9K_TSFOOR_THRESHOLD;
565

566 567
	ath_dbg(common, BEACON, "tsf: %llu tsftu: %u\n", tsf, tsftu);
	ath_dbg(common, BEACON,
J
Joe Perches 已提交
568 569 570
		"bmiss: %u sleep: %u cfp-period: %u maxdur: %u next: %u\n",
		bs.bs_bmissthreshold, bs.bs_sleepduration,
		bs.bs_cfpperiod, bs.bs_cfpmaxduration, bs.bs_cfpnext);
571

572
	/* Set the computed STA beacon timers */
S
Sujith 已提交
573

574
	ath9k_hw_disable_interrupts(ah);
P
Pavel Roskin 已提交
575 576
	ath9k_hw_set_sta_beacon_timers(ah, &bs);
	ah->imask |= ATH9K_INT_BMISS;
577

578
	ath9k_hw_set_interrupts(ah);
579
	ath9k_hw_enable_interrupts(ah);
580
}
581

582
static void ath_beacon_config_adhoc(struct ath_softc *sc,
583
				    struct ath_beacon_config *conf)
584
{
P
Pavel Roskin 已提交
585 586
	struct ath_hw *ah = sc->sc_ah;
	struct ath_common *common = ath9k_hw_common(ah);
587
	u32 tsf, intval, nexttbtt;
588

589
	ath9k_reset_beacon_status(sc);
S
Sujith Manoharan 已提交
590
	if (!test_bit(SC_OP_BEACONS, &sc->sc_flags))
591
		ath9k_hw_settsf64(ah, sc->beacon.bc_tstamp);
592

593
	intval = TU_TO_USEC(conf->beacon_interval);
594 595
	tsf = roundup(ath9k_hw_gettsf32(ah) + TU_TO_USEC(FUDGE), intval);
	nexttbtt = tsf + intval;
596

597
	ath_dbg(common, BEACON, "IBSS nexttbtt %u intval %u (%u)\n",
J
Joe Perches 已提交
598
		nexttbtt, intval, conf->beacon_interval);
S
Sujith 已提交
599

600 601 602 603 604
	/*
	 * In IBSS mode enable the beacon timers but only enable SWBA interrupts
	 * if we need to manually prepare beacon frames.  Otherwise we use a
	 * self-linked tx descriptor and let the hardware deal with things.
	 */
605
	ah->imask |= ATH9K_INT_SWBA;
S
Sujith 已提交
606

607 608 609 610
	ath_beaconq_config(sc);

	/* Set the computed ADHOC beacon timers */

611
	ath9k_hw_disable_interrupts(ah);
612
	ath9k_beacon_init(sc, nexttbtt, intval);
613
	sc->beacon.bmisscnt = 0;
614

615
	ath9k_hw_set_interrupts(ah);
616
	ath9k_hw_enable_interrupts(ah);
617 618
}

619 620
static bool ath9k_allow_beacon_config(struct ath_softc *sc,
				      struct ieee80211_vif *vif)
621
{
622
	struct ath_beacon_config *cur_conf = &sc->cur_beacon_conf;
623
	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
624 625
	struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
	struct ath_vif *avp = (void *)vif->drv_priv;
626

627 628 629 630 631 632 633 634
	/*
	 * Can not have different beacon interval on multiple
	 * AP interface case
	 */
	if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) &&
	    (sc->nbcnvifs > 1) &&
	    (vif->type == NL80211_IFTYPE_AP) &&
	    (cur_conf->beacon_interval != bss_conf->beacon_int)) {
635 636
		ath_dbg(common, CONFIG,
			"Changing beacon interval of multiple AP interfaces !\n");
637 638 639 640 641 642 643 644
		return false;
	}
	/*
	 * Can not configure station vif's beacon config
	 * while on AP opmode
	 */
	if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) &&
	    (vif->type != NL80211_IFTYPE_AP)) {
645
		ath_dbg(common, CONFIG,
646 647 648 649 650 651 652 653 654
			"STA vif's beacon not allowed on AP mode\n");
		return false;
	}
	/*
	 * Do not allow beacon config if HW was already configured
	 * with another STA vif
	 */
	if ((sc->sc_ah->opmode == NL80211_IFTYPE_STATION) &&
	    (vif->type == NL80211_IFTYPE_STATION) &&
S
Sujith Manoharan 已提交
655
	    test_bit(SC_OP_BEACONS, &sc->sc_flags) &&
656
	    !avp->primary_sta_vif) {
657
		ath_dbg(common, CONFIG,
658 659
			"Beacon already configured for a station interface\n");
		return false;
660
	}
661 662 663 664 665 666 667
	return true;
}

void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif)
{
	struct ath_beacon_config *cur_conf = &sc->cur_beacon_conf;
	struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
668

669 670 671 672 673 674
	if (!ath9k_allow_beacon_config(sc, vif))
		return;

	/* Setup the beacon configuration parameters */
	cur_conf->beacon_interval = bss_conf->beacon_int;
	cur_conf->dtim_period = bss_conf->dtim_period;
675 676 677 678
	cur_conf->listen_interval = 1;
	cur_conf->dtim_count = 1;
	cur_conf->bmiss_timeout =
		ATH_DEFAULT_BMISS_LIMIT * cur_conf->beacon_interval;
679

680 681 682 683 684 685 686 687
	/*
	 * It looks like mac80211 may end up using beacon interval of zero in
	 * some cases (at least for mesh point). Avoid getting into an
	 * infinite loop by using a bit safer value instead. To be safe,
	 * do sanity check on beacon interval for all operating modes.
	 */
	if (cur_conf->beacon_interval == 0)
		cur_conf->beacon_interval = 100;
688

689
	/*
690 691 692
	 * We don't parse dtim period from mac80211 during the driver
	 * initialization as it breaks association with hidden-ssid
	 * AP and it causes latency in roaming
693 694 695 696
	 */
	if (cur_conf->dtim_period == 0)
		cur_conf->dtim_period = 1;

697 698 699
	ath_set_beacon(sc);
}

700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718
static bool ath_has_valid_bslot(struct ath_softc *sc)
{
	struct ath_vif *avp;
	int slot;
	bool found = false;

	for (slot = 0; slot < ATH_BCBUF; slot++) {
		if (sc->beacon.bslot[slot]) {
			avp = (void *)sc->beacon.bslot[slot]->drv_priv;
			if (avp->is_bslot_active) {
				found = true;
				break;
			}
		}
	}
	return found;
}


719 720 721 722 723
void ath_set_beacon(struct ath_softc *sc)
{
	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
	struct ath_beacon_config *cur_conf = &sc->cur_beacon_conf;

724
	switch (sc->sc_ah->opmode) {
725
	case NL80211_IFTYPE_AP:
726 727
		if (ath_has_valid_bslot(sc))
			ath_beacon_config_ap(sc, cur_conf);
728 729 730
		break;
	case NL80211_IFTYPE_ADHOC:
	case NL80211_IFTYPE_MESH_POINT:
731
		ath_beacon_config_adhoc(sc, cur_conf);
732 733 734 735 736
		break;
	case NL80211_IFTYPE_STATION:
		ath_beacon_config_sta(sc, cur_conf);
		break;
	default:
737
		ath_dbg(common, CONFIG, "Unsupported beaconing mode\n");
738 739 740
		return;
	}

S
Sujith Manoharan 已提交
741
	set_bit(SC_OP_BEACONS, &sc->sc_flags);
742
}
743 744 745 746 747

void ath9k_set_beaconing_status(struct ath_softc *sc, bool status)
{
	struct ath_hw *ah = sc->sc_ah;

748
	if (!ath_has_valid_bslot(sc)) {
S
Sujith Manoharan 已提交
749
		clear_bit(SC_OP_BEACONS, &sc->sc_flags);
750
		return;
751
	}
752 753 754 755 756

	ath9k_ps_wakeup(sc);
	if (status) {
		/* Re-enable beaconing */
		ah->imask |= ATH9K_INT_SWBA;
757
		ath9k_hw_set_interrupts(ah);
758 759 760
	} else {
		/* Disable SWBA interrupt */
		ah->imask &= ~ATH9K_INT_SWBA;
761
		ath9k_hw_set_interrupts(ah);
762
		tasklet_kill(&sc->bcon_tasklet);
763
		ath9k_hw_stop_dma_queue(ah, sc->beacon.beaconq);
764 765 766
	}
	ath9k_ps_restore(sc);
}