twl6040.c 18.4 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
/*
 * MFD driver for TWL6040 audio device
 *
 * Authors:	Misael Lopez Cruz <misael.lopez@ti.com>
 *		Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
 *		Peter Ujfalusi <peter.ujfalusi@ti.com>
 *
 * Copyright:	(C) 2011 Texas Instruments, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
 * 02110-1301 USA
 *
 */

#include <linux/module.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/kernel.h>
30
#include <linux/err.h>
31
#include <linux/platform_device.h>
32 33 34 35
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_gpio.h>
#include <linux/of_platform.h>
36 37
#include <linux/gpio.h>
#include <linux/delay.h>
38 39
#include <linux/i2c.h>
#include <linux/regmap.h>
40 41
#include <linux/mfd/core.h>
#include <linux/mfd/twl6040.h>
42
#include <linux/regulator/consumer.h>
43

44
#define VIBRACTRL_MEMBER(reg) ((reg == TWL6040_REG_VIBCTLL) ? 0 : 1)
45
#define TWL6040_NUM_SUPPLIES	(2)
46

S
Samuel Ortiz 已提交
47 48 49 50 51 52 53 54 55 56 57 58 59 60
static bool twl6040_has_vibra(struct twl6040_platform_data *pdata,
			      struct device_node *node)
{
	if (pdata && pdata->vibra)
		return true;

#ifdef CONFIG_OF
	if (of_find_node_by_name(node, "vibra"))
		return true;
#endif

	return false;
}

61 62 63
int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg)
{
	int ret;
64
	unsigned int val;
65

66 67 68 69 70
	/* Vibra control registers from cache */
	if (unlikely(reg == TWL6040_REG_VIBCTLL ||
		     reg == TWL6040_REG_VIBCTLR)) {
		val = twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)];
	} else {
71
		ret = regmap_read(twl6040->regmap, reg, &val);
72
		if (ret < 0)
73
			return ret;
74 75 76 77 78 79 80 81 82 83
	}

	return val;
}
EXPORT_SYMBOL(twl6040_reg_read);

int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg, u8 val)
{
	int ret;

84
	ret = regmap_write(twl6040->regmap, reg, val);
85 86 87
	/* Cache the vibra control registers */
	if (reg == TWL6040_REG_VIBCTLL || reg == TWL6040_REG_VIBCTLR)
		twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)] = val;
88 89 90 91 92 93 94

	return ret;
}
EXPORT_SYMBOL(twl6040_reg_write);

int twl6040_set_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask)
{
95
	return regmap_update_bits(twl6040->regmap, reg, mask, mask);
96 97 98 99 100
}
EXPORT_SYMBOL(twl6040_set_bits);

int twl6040_clear_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask)
{
101
	return regmap_update_bits(twl6040->regmap, reg, mask, 0);
102 103 104 105
}
EXPORT_SYMBOL(twl6040_clear_bits);

/* twl6040 codec manual power-up sequence */
106
static int twl6040_power_up_manual(struct twl6040 *twl6040)
107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159
{
	u8 ldoctl, ncpctl, lppllctl;
	int ret;

	/* enable high-side LDO, reference system and internal oscillator */
	ldoctl = TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA;
	ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
	if (ret)
		return ret;
	usleep_range(10000, 10500);

	/* enable negative charge pump */
	ncpctl = TWL6040_NCPENA;
	ret = twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
	if (ret)
		goto ncp_err;
	usleep_range(1000, 1500);

	/* enable low-side LDO */
	ldoctl |= TWL6040_LSLDOENA;
	ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
	if (ret)
		goto lsldo_err;
	usleep_range(1000, 1500);

	/* enable low-power PLL */
	lppllctl = TWL6040_LPLLENA;
	ret = twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
	if (ret)
		goto lppll_err;
	usleep_range(5000, 5500);

	/* disable internal oscillator */
	ldoctl &= ~TWL6040_OSCENA;
	ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
	if (ret)
		goto osc_err;

	return 0;

osc_err:
	lppllctl &= ~TWL6040_LPLLENA;
	twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
lppll_err:
	ldoctl &= ~TWL6040_LSLDOENA;
	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
lsldo_err:
	ncpctl &= ~TWL6040_NCPENA;
	twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
ncp_err:
	ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA);
	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);

160
	dev_err(twl6040->dev, "manual power-up failed\n");
161 162 163 164
	return ret;
}

/* twl6040 manual power-down sequence */
165
static void twl6040_power_down_manual(struct twl6040 *twl6040)
166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194
{
	u8 ncpctl, ldoctl, lppllctl;

	ncpctl = twl6040_reg_read(twl6040, TWL6040_REG_NCPCTL);
	ldoctl = twl6040_reg_read(twl6040, TWL6040_REG_LDOCTL);
	lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL);

	/* enable internal oscillator */
	ldoctl |= TWL6040_OSCENA;
	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
	usleep_range(1000, 1500);

	/* disable low-power PLL */
	lppllctl &= ~TWL6040_LPLLENA;
	twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);

	/* disable low-side LDO */
	ldoctl &= ~TWL6040_LSLDOENA;
	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);

	/* disable negative charge pump */
	ncpctl &= ~TWL6040_NCPENA;
	twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);

	/* disable high-side LDO, reference system and internal oscillator */
	ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA);
	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
}

195
static irqreturn_t twl6040_readyint_handler(int irq, void *data)
196 197 198
{
	struct twl6040 *twl6040 = data;

199
	complete(&twl6040->ready);
200

201 202
	return IRQ_HANDLED;
}
203

204 205 206 207 208 209 210 211 212 213 214 215
static irqreturn_t twl6040_thint_handler(int irq, void *data)
{
	struct twl6040 *twl6040 = data;
	u8 status;

	status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
	if (status & TWL6040_TSHUTDET) {
		dev_warn(twl6040->dev, "Thermal shutdown, powering-off");
		twl6040_power(twl6040, 0);
	} else {
		dev_warn(twl6040->dev, "Leaving thermal shutdown, powering-on");
		twl6040_power(twl6040, 1);
216 217 218 219 220
	}

	return IRQ_HANDLED;
}

221
static int twl6040_power_up_automatic(struct twl6040 *twl6040)
222 223
{
	int time_left;
224 225

	gpio_set_value(twl6040->audpwron, 1);
226 227 228 229

	time_left = wait_for_completion_timeout(&twl6040->ready,
						msecs_to_jiffies(144));
	if (!time_left) {
230 231 232
		u8 intid;

		dev_warn(twl6040->dev, "timeout waiting for READYINT\n");
233 234
		intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID);
		if (!(intid & TWL6040_READYINT)) {
235 236
			dev_err(twl6040->dev, "automatic power-up failed\n");
			gpio_set_value(twl6040->audpwron, 0);
237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254
			return -ETIMEDOUT;
		}
	}

	return 0;
}

int twl6040_power(struct twl6040 *twl6040, int on)
{
	int ret = 0;

	mutex_lock(&twl6040->mutex);

	if (on) {
		/* already powered-up */
		if (twl6040->power_count++)
			goto out;

255 256 257
		if (gpio_is_valid(twl6040->audpwron)) {
			/* use automatic power-up sequence */
			ret = twl6040_power_up_automatic(twl6040);
258 259 260 261 262 263
			if (ret) {
				twl6040->power_count = 0;
				goto out;
			}
		} else {
			/* use manual power-up sequence */
264
			ret = twl6040_power_up_manual(twl6040);
265 266 267 268 269
			if (ret) {
				twl6040->power_count = 0;
				goto out;
			}
		}
270 271
		/* Default PLL configuration after power up */
		twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL;
272
		twl6040->sysclk = 19200000;
273
		twl6040->mclk = 32768;
274 275 276
	} else {
		/* already powered-down */
		if (!twl6040->power_count) {
277
			dev_err(twl6040->dev,
278 279 280 281 282 283 284 285
				"device is already powered-off\n");
			ret = -EPERM;
			goto out;
		}

		if (--twl6040->power_count)
			goto out;

286
		if (gpio_is_valid(twl6040->audpwron)) {
287
			/* use AUDPWRON line */
288
			gpio_set_value(twl6040->audpwron, 0);
289 290 291 292 293

			/* power-down sequence latency */
			usleep_range(500, 700);
		} else {
			/* use manual power-down sequence */
294
			twl6040_power_down_manual(twl6040);
295 296
		}
		twl6040->sysclk = 0;
297
		twl6040->mclk = 0;
298 299 300 301 302 303 304 305
	}

out:
	mutex_unlock(&twl6040->mutex);
	return ret;
}
EXPORT_SYMBOL(twl6040_power);

306
int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
307 308 309 310 311 312 313 314 315 316
		    unsigned int freq_in, unsigned int freq_out)
{
	u8 hppllctl, lppllctl;
	int ret = 0;

	mutex_lock(&twl6040->mutex);

	hppllctl = twl6040_reg_read(twl6040, TWL6040_REG_HPPLLCTL);
	lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL);

317 318 319 320 321 322
	/* Force full reconfiguration when switching between PLL */
	if (pll_id != twl6040->pll) {
		twl6040->sysclk = 0;
		twl6040->mclk = 0;
	}

323 324
	switch (pll_id) {
	case TWL6040_SYSCLK_SEL_LPPLL:
325
		/* low-power PLL divider */
326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343
		/* Change the sysclk configuration only if it has been canged */
		if (twl6040->sysclk != freq_out) {
			switch (freq_out) {
			case 17640000:
				lppllctl |= TWL6040_LPLLFIN;
				break;
			case 19200000:
				lppllctl &= ~TWL6040_LPLLFIN;
				break;
			default:
				dev_err(twl6040->dev,
					"freq_out %d not supported\n",
					freq_out);
				ret = -EINVAL;
				goto pll_out;
			}
			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
					  lppllctl);
344
		}
345 346 347 348

		/* The PLL in use has not been change, we can exit */
		if (twl6040->pll == pll_id)
			break;
349 350 351 352 353 354 355 356 357 358 359 360 361 362 363

		switch (freq_in) {
		case 32768:
			lppllctl |= TWL6040_LPLLENA;
			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
					  lppllctl);
			mdelay(5);
			lppllctl &= ~TWL6040_HPLLSEL;
			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
					  lppllctl);
			hppllctl &= ~TWL6040_HPLLENA;
			twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL,
					  hppllctl);
			break;
		default:
364
			dev_err(twl6040->dev,
365 366 367 368 369
				"freq_in %d not supported\n", freq_in);
			ret = -EINVAL;
			goto pll_out;
		}
		break;
370
	case TWL6040_SYSCLK_SEL_HPPLL:
371 372
		/* high-performance PLL can provide only 19.2 MHz */
		if (freq_out != 19200000) {
373
			dev_err(twl6040->dev,
374 375 376 377 378
				"freq_out %d not supported\n", freq_out);
			ret = -EINVAL;
			goto pll_out;
		}

379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411
		if (twl6040->mclk != freq_in) {
			hppllctl &= ~TWL6040_MCLK_MSK;

			switch (freq_in) {
			case 12000000:
				/* PLL enabled, active mode */
				hppllctl |= TWL6040_MCLK_12000KHZ |
					    TWL6040_HPLLENA;
				break;
			case 19200000:
				/*
				* PLL disabled
				* (enable PLL if MCLK jitter quality
				*  doesn't meet specification)
				*/
				hppllctl |= TWL6040_MCLK_19200KHZ;
				break;
			case 26000000:
				/* PLL enabled, active mode */
				hppllctl |= TWL6040_MCLK_26000KHZ |
					    TWL6040_HPLLENA;
				break;
			case 38400000:
				/* PLL enabled, active mode */
				hppllctl |= TWL6040_MCLK_38400KHZ |
					    TWL6040_HPLLENA;
				break;
			default:
				dev_err(twl6040->dev,
					"freq_in %d not supported\n", freq_in);
				ret = -EINVAL;
				goto pll_out;
			}
412 413

			/*
414 415
			 * enable clock slicer to ensure input waveform is
			 * square
416
			 */
417
			hppllctl |= TWL6040_HPLLSQRENA;
418

419 420 421 422 423 424 425 426 427 428
			twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL,
					  hppllctl);
			usleep_range(500, 700);
			lppllctl |= TWL6040_HPLLSEL;
			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
					  lppllctl);
			lppllctl &= ~TWL6040_LPLLENA;
			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
					  lppllctl);
		}
429 430
		break;
	default:
431
		dev_err(twl6040->dev, "unknown pll id %d\n", pll_id);
432 433 434 435 436
		ret = -EINVAL;
		goto pll_out;
	}

	twl6040->sysclk = freq_out;
437
	twl6040->mclk = freq_in;
438
	twl6040->pll = pll_id;
439 440 441 442 443 444 445

pll_out:
	mutex_unlock(&twl6040->mutex);
	return ret;
}
EXPORT_SYMBOL(twl6040_set_pll);

446
int twl6040_get_pll(struct twl6040 *twl6040)
447
{
448 449 450 451
	if (twl6040->power_count)
		return twl6040->pll;
	else
		return -ENODEV;
452 453 454 455 456 457 458 459 460
}
EXPORT_SYMBOL(twl6040_get_pll);

unsigned int twl6040_get_sysclk(struct twl6040 *twl6040)
{
	return twl6040->sysclk;
}
EXPORT_SYMBOL(twl6040_get_sysclk);

461 462 463 464 465 466 467 468 469 470 471 472
/* Get the combined status of the vibra control register */
int twl6040_get_vibralr_status(struct twl6040 *twl6040)
{
	u8 status;

	status = twl6040->vibra_ctrl_cache[0] | twl6040->vibra_ctrl_cache[1];
	status &= (TWL6040_VIBENA | TWL6040_VIBSEL);

	return status;
}
EXPORT_SYMBOL(twl6040_get_vibralr_status);

473 474 475 476 477 478 479 480 481 482 483 484
static struct resource twl6040_vibra_rsrc[] = {
	{
		.flags = IORESOURCE_IRQ,
	},
};

static struct resource twl6040_codec_rsrc[] = {
	{
		.flags = IORESOURCE_IRQ,
	},
};

485
static bool twl6040_readable_reg(struct device *dev, unsigned int reg)
486
{
487 488 489 490 491 492 493 494 495 496 497 498 499 500
	/* Register 0 is not readable */
	if (!reg)
		return false;
	return true;
}

static struct regmap_config twl6040_regmap_config = {
	.reg_bits = 8,
	.val_bits = 8,
	.max_register = TWL6040_REG_STATUS, /* 0x2e */

	.readable_reg = twl6040_readable_reg,
};

501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519
static const struct regmap_irq twl6040_irqs[] = {
	{ .reg_offset = 0, .mask = TWL6040_THINT, },
	{ .reg_offset = 0, .mask = TWL6040_PLUGINT | TWL6040_UNPLUGINT, },
	{ .reg_offset = 0, .mask = TWL6040_HOOKINT, },
	{ .reg_offset = 0, .mask = TWL6040_HFINT, },
	{ .reg_offset = 0, .mask = TWL6040_VIBINT, },
	{ .reg_offset = 0, .mask = TWL6040_READYINT, },
};

static struct regmap_irq_chip twl6040_irq_chip = {
	.name = "twl6040",
	.irqs = twl6040_irqs,
	.num_irqs = ARRAY_SIZE(twl6040_irqs),

	.num_regs = 1,
	.status_base = TWL6040_REG_INTID,
	.mask_base = TWL6040_REG_INTMR,
};

520 521
static int twl6040_probe(struct i2c_client *client,
			 const struct i2c_device_id *id)
522 523
{
	struct twl6040_platform_data *pdata = client->dev.platform_data;
524
	struct device_node *node = client->dev.of_node;
525 526
	struct twl6040 *twl6040;
	struct mfd_cell *cell = NULL;
527
	int irq, ret, children = 0;
528

529
	if (!pdata && !node) {
530
		dev_err(&client->dev, "Platform data is missing\n");
531 532 533
		return -EINVAL;
	}

534
	/* In order to operate correctly we need valid interrupt config */
535
	if (!client->irq) {
536
		dev_err(&client->dev, "Invalid IRQ configuration\n");
537 538 539
		return -EINVAL;
	}

540 541 542 543 544 545 546
	twl6040 = devm_kzalloc(&client->dev, sizeof(struct twl6040),
			       GFP_KERNEL);
	if (!twl6040) {
		ret = -ENOMEM;
		goto err;
	}

547
	twl6040->regmap = devm_regmap_init_i2c(client, &twl6040_regmap_config);
548 549 550 551
	if (IS_ERR(twl6040->regmap)) {
		ret = PTR_ERR(twl6040->regmap);
		goto err;
	}
552

553
	i2c_set_clientdata(client, twl6040);
554

555 556
	twl6040->supplies[0].supply = "vio";
	twl6040->supplies[1].supply = "v2v1";
557
	ret = devm_regulator_bulk_get(&client->dev, TWL6040_NUM_SUPPLIES,
558 559 560 561 562 563 564 565 566
				 twl6040->supplies);
	if (ret != 0) {
		dev_err(&client->dev, "Failed to get supplies: %d\n", ret);
		goto regulator_get_err;
	}

	ret = regulator_bulk_enable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
	if (ret != 0) {
		dev_err(&client->dev, "Failed to enable supplies: %d\n", ret);
567
		goto regulator_get_err;
568 569
	}

570 571
	twl6040->dev = &client->dev;
	twl6040->irq = client->irq;
572 573 574 575 576 577

	mutex_init(&twl6040->mutex);
	init_completion(&twl6040->ready);

	twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);

578
	/* ERRATA: Automatic power-up is not possible in ES1.0 */
579 580 581 582 583 584 585
	if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0) {
		if (pdata)
			twl6040->audpwron = pdata->audpwron_gpio;
		else
			twl6040->audpwron = of_get_named_gpio(node,
						"ti,audpwron-gpio", 0);
	} else
586 587
		twl6040->audpwron = -EINVAL;

588
	if (gpio_is_valid(twl6040->audpwron)) {
589 590
		ret = devm_gpio_request_one(&client->dev, twl6040->audpwron,
					GPIOF_OUT_INIT_LOW, "audpwron");
591
		if (ret)
592
			goto gpio_err;
593 594
	}

595 596 597 598
	ret = regmap_add_irq_chip(twl6040->regmap, twl6040->irq,
			IRQF_ONESHOT, 0, &twl6040_irq_chip,
			&twl6040->irq_data);
	if (ret < 0)
599
		goto gpio_err;
600

601 602 603 604 605
	twl6040->irq_ready = regmap_irq_get_virq(twl6040->irq_data,
					       TWL6040_IRQ_READY);
	twl6040->irq_th = regmap_irq_get_virq(twl6040->irq_data,
					       TWL6040_IRQ_TH);

606
	ret = devm_request_threaded_irq(twl6040->dev, twl6040->irq_ready, NULL,
607
				   twl6040_readyint_handler, IRQF_ONESHOT,
608
				   "twl6040_irq_ready", twl6040);
609
	if (ret) {
610 611 612 613
		dev_err(twl6040->dev, "READY IRQ request failed: %d\n", ret);
		goto readyirq_err;
	}

614
	ret = devm_request_threaded_irq(twl6040->dev, twl6040->irq_th, NULL,
615
				   twl6040_thint_handler, IRQF_ONESHOT,
616 617 618 619
				   "twl6040_irq_th", twl6040);
	if (ret) {
		dev_err(twl6040->dev, "Thermal IRQ request failed: %d\n", ret);
		goto thirq_err;
620 621 622 623 624
	}

	/* dual-access registers controlled by I2C only */
	twl6040_set_bits(twl6040, TWL6040_REG_ACCCTL, TWL6040_I2CSEL);

625 626 627 628 629 630
	/*
	 * The main functionality of twl6040 to provide audio on OMAP4+ systems.
	 * We can add the ASoC codec child whenever this driver has been loaded.
	 * The ASoC codec can work without pdata, pass the platform_data only if
	 * it has been provided.
	 */
631
	irq = regmap_irq_get_virq(twl6040->irq_data, TWL6040_IRQ_PLUG);
632 633 634 635 636 637
	cell = &twl6040->cells[children];
	cell->name = "twl6040-codec";
	twl6040_codec_rsrc[0].start = irq;
	twl6040_codec_rsrc[0].end = irq;
	cell->resources = twl6040_codec_rsrc;
	cell->num_resources = ARRAY_SIZE(twl6040_codec_rsrc);
638
	if (pdata && pdata->codec) {
639 640
		cell->platform_data = pdata->codec;
		cell->pdata_size = sizeof(*pdata->codec);
641
	}
642
	children++;
643

S
Samuel Ortiz 已提交
644
	if (twl6040_has_vibra(pdata, node)) {
645
		irq = regmap_irq_get_virq(twl6040->irq_data, TWL6040_IRQ_VIB);
646

647 648
		cell = &twl6040->cells[children];
		cell->name = "twl6040-vibra";
649 650 651 652 653
		twl6040_vibra_rsrc[0].start = irq;
		twl6040_vibra_rsrc[0].end = irq;
		cell->resources = twl6040_vibra_rsrc;
		cell->num_resources = ARRAY_SIZE(twl6040_vibra_rsrc);

654 655 656 657
		if (pdata && pdata->vibra) {
			cell->platform_data = pdata->vibra;
			cell->pdata_size = sizeof(*pdata->vibra);
		}
658 659 660
		children++;
	}

661 662 663 664 665 666 667 668 669 670 671 672 673 674 675
	/*
	 * Enable the GPO driver in the following cases:
	 * DT booted kernel or legacy boot with valid gpo platform_data
	 */
	if (!pdata || (pdata && pdata->gpo)) {
		cell = &twl6040->cells[children];
		cell->name = "twl6040-gpo";

		if (pdata) {
			cell->platform_data = pdata->gpo;
			cell->pdata_size = sizeof(*pdata->gpo);
		}
		children++;
	}

676
	ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children,
677
			      NULL, 0, NULL);
678
	if (ret)
679 680 681 682 683
		goto mfd_err;

	return 0;

mfd_err:
684
	devm_free_irq(&client->dev, twl6040->irq_th, twl6040);
685
thirq_err:
686
	devm_free_irq(&client->dev, twl6040->irq_ready, twl6040);
687
readyirq_err:
688
	regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
689 690 691
gpio_err:
	regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
regulator_get_err:
692 693
	i2c_set_clientdata(client, NULL);
err:
694 695 696
	return ret;
}

697
static int twl6040_remove(struct i2c_client *client)
698
{
699
	struct twl6040 *twl6040 = i2c_get_clientdata(client);
700 701 702 703

	if (twl6040->power_count)
		twl6040_power(twl6040, 0);

704 705
	devm_free_irq(&client->dev, twl6040->irq_ready, twl6040);
	devm_free_irq(&client->dev, twl6040->irq_th, twl6040);
706
	regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
707

708 709
	mfd_remove_devices(&client->dev);
	i2c_set_clientdata(client, NULL);
710

711 712
	regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);

713 714 715
	return 0;
}

716 717
static const struct i2c_device_id twl6040_i2c_id[] = {
	{ "twl6040", 0, },
P
Peter Ujfalusi 已提交
718
	{ "twl6041", 0, },
719 720 721 722 723 724 725 726 727
	{ },
};
MODULE_DEVICE_TABLE(i2c, twl6040_i2c_id);

static struct i2c_driver twl6040_driver = {
	.driver = {
		.name = "twl6040",
		.owner = THIS_MODULE,
	},
728
	.probe		= twl6040_probe,
729
	.remove		= twl6040_remove,
730
	.id_table	= twl6040_i2c_id,
731 732
};

733
module_i2c_driver(twl6040_driver);
734 735 736 737 738 739

MODULE_DESCRIPTION("TWL6040 MFD");
MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>");
MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:twl6040");