edb93xx.c 9.9 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
/*
 * arch/arm/mach-ep93xx/edb93xx.c
 * Cirrus Logic EDB93xx Development Board support.
 *
 * EDB93XX, EDB9301, EDB9307A
 * Copyright (C) 2008-2009 H Hartley Sweeten <hsweeten@visionengravers.com>
 *
 * EDB9302
 * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
 *
 * EDB9302A, EDB9315, EDB9315A
 * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
 *
 * EDB9307
 * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
 *
 * EDB9312
 * Copyright (C) 2006 Infosys Technologies Limited
 *                    Toufeeq Hussain <toufeeq_hussain@infosys.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or (at
 * your option) any later version.
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
30 31 32
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
33 34 35
#include <linux/spi/spi.h>

#include <sound/cs4271.h>
36

37
#include <mach/hardware.h>
38
#include <mach/fb.h>
39
#include <mach/ep93xx_spi.h>
40
#include <mach/gpio-ep93xx.h>
41

42
#include <asm/hardware/vic.h>
43 44 45
#include <asm/mach-types.h>
#include <asm/mach/arch.h>

46
#include "soc.h"
47

48 49 50 51
static void __init edb93xx_register_flash(void)
{
	if (machine_is_edb9307() || machine_is_edb9312() ||
	    machine_is_edb9315()) {
52
		ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
53
	} else {
54
		ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
55 56 57
	}
}

58
static struct ep93xx_eth_data __initdata edb93xx_eth_data = {
59 60 61
	.phy_id		= 1,
};

62 63 64 65

/*************************************************************************
 * EDB93xx i2c peripheral handling
 *************************************************************************/
66
static struct i2c_gpio_platform_data __initdata edb93xx_i2c_gpio_data = {
67 68 69 70 71 72 73 74 75
	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
	.sda_is_open_drain	= 0,
	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
	.scl_is_open_drain	= 0,
	.udelay			= 0,	/* default to 100 kHz */
	.timeout		= 0,	/* default to 100 ms */
};

static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = {
76 77 78 79 80
	{
		I2C_BOARD_INFO("isl1208", 0x6f),
	},
};

81
static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = {
82 83 84 85 86 87 88 89 90
	{
		I2C_BOARD_INFO("ds1337", 0x68),
	},
};

static void __init edb93xx_register_i2c(void)
{
	if (machine_is_edb9302a() || machine_is_edb9307a() ||
	    machine_is_edb9315a()) {
91 92 93
		ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
				    edb93xxa_i2c_board_info,
				    ARRAY_SIZE(edb93xxa_i2c_board_info));
94 95
	} else if (machine_is_edb9302() || machine_is_edb9307()
		|| machine_is_edb9312() || machine_is_edb9315()) {
96
		ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
97 98
				    edb93xx_i2c_board_info,
				    ARRAY_SIZE(edb93xx_i2c_board_info));
99 100 101
	}
}

102

103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164
/*************************************************************************
 * EDB93xx SPI peripheral handling
 *************************************************************************/
static struct cs4271_platform_data edb93xx_cs4271_data = {
	.gpio_nreset	= -EINVAL,	/* filled in later */
};

static int edb93xx_cs4271_hw_setup(struct spi_device *spi)
{
	return gpio_request_one(EP93XX_GPIO_LINE_EGPIO6,
				GPIOF_OUT_INIT_HIGH, spi->modalias);
}

static void edb93xx_cs4271_hw_cleanup(struct spi_device *spi)
{
	gpio_free(EP93XX_GPIO_LINE_EGPIO6);
}

static void edb93xx_cs4271_hw_cs_control(struct spi_device *spi, int value)
{
	gpio_set_value(EP93XX_GPIO_LINE_EGPIO6, value);
}

static struct ep93xx_spi_chip_ops edb93xx_cs4271_hw = {
	.setup		= edb93xx_cs4271_hw_setup,
	.cleanup	= edb93xx_cs4271_hw_cleanup,
	.cs_control	= edb93xx_cs4271_hw_cs_control,
};

static struct spi_board_info edb93xx_spi_board_info[] __initdata = {
	{
		.modalias		= "cs4271",
		.platform_data		= &edb93xx_cs4271_data,
		.controller_data	= &edb93xx_cs4271_hw,
		.max_speed_hz		= 6000000,
		.bus_num		= 0,
		.chip_select		= 0,
		.mode			= SPI_MODE_3,
	},
};

static struct ep93xx_spi_info edb93xx_spi_info __initdata = {
	.num_chipselect	= ARRAY_SIZE(edb93xx_spi_board_info),
};

static void __init edb93xx_register_spi(void)
{
	if (machine_is_edb9301() || machine_is_edb9302())
		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO1;
	else if (machine_is_edb9302a() || machine_is_edb9307a())
		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_H(2);
	else if (machine_is_edb9315a())
		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO14;

	ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info,
			    ARRAY_SIZE(edb93xx_spi_board_info));
}


/*************************************************************************
 * EDB93xx I2S
 *************************************************************************/
165 166 167 168 169
static struct platform_device edb93xx_audio_device = {
	.name		= "edb93xx-audio",
	.id		= -1,
};

170 171 172 173 174 175 176 177 178 179 180
static int __init edb93xx_has_audio(void)
{
	return (machine_is_edb9301() || machine_is_edb9302() ||
		machine_is_edb9302a() || machine_is_edb9307a() ||
		machine_is_edb9315a());
}

static void __init edb93xx_register_i2s(void)
{
	if (edb93xx_has_audio()) {
		ep93xx_register_i2s();
181
		platform_device_register(&edb93xx_audio_device);
182 183 184 185
	}
}


186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204
/*************************************************************************
 * EDB93xx pwm
 *************************************************************************/
static void __init edb93xx_register_pwm(void)
{
	if (machine_is_edb9301() ||
	    machine_is_edb9302() || machine_is_edb9302a()) {
		/* EP9301 and EP9302 only have pwm.1 (EGPIO14) */
		ep93xx_register_pwm(0, 1);
	} else if (machine_is_edb9307() || machine_is_edb9307a()) {
		/* EP9307 only has pwm.0 (PWMOUT) */
		ep93xx_register_pwm(1, 0);
	} else {
		/* EP9312 and EP9315 have both */
		ep93xx_register_pwm(1, 1);
	}
}


205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235
/*************************************************************************
 * EDB93xx framebuffer
 *************************************************************************/
static struct ep93xxfb_mach_info __initdata edb93xxfb_info = {
	.num_modes	= EP93XXFB_USE_MODEDB,
	.bpp		= 16,
	.flags		= 0,
};

static int __init edb93xx_has_fb(void)
{
	/* These platforms have an ep93xx with video capability */
	return machine_is_edb9307() || machine_is_edb9307a() ||
	       machine_is_edb9312() || machine_is_edb9315() ||
	       machine_is_edb9315a();
}

static void __init edb93xx_register_fb(void)
{
	if (!edb93xx_has_fb())
		return;

	if (machine_is_edb9307a() || machine_is_edb9315a())
		edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN0;
	else
		edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN3;

	ep93xx_register_fb(&edb93xxfb_info);
}


236 237 238 239 240 241
static void __init edb93xx_init_machine(void)
{
	ep93xx_init_devices();
	edb93xx_register_flash();
	ep93xx_register_eth(&edb93xx_eth_data, 1);
	edb93xx_register_i2c();
242 243
	edb93xx_register_spi();
	edb93xx_register_i2s();
244
	edb93xx_register_pwm();
245
	edb93xx_register_fb();
246 247 248 249 250 251
}


#ifdef CONFIG_MACH_EDB9301
MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
252
	.atag_offset	= 0x100,
253 254
	.map_io		= ep93xx_map_io,
	.init_irq	= ep93xx_init_irq,
255
	.handle_irq	= vic_handle_irq,
256 257
	.timer		= &ep93xx_timer,
	.init_machine	= edb93xx_init_machine,
258
	.init_late	= ep93xx_init_late,
259
	.restart	= ep93xx_restart,
260 261 262 263 264 265
MACHINE_END
#endif

#ifdef CONFIG_MACH_EDB9302
MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
	/* Maintainer: George Kashperko <george@chas.com.ua> */
266
	.atag_offset	= 0x100,
267 268
	.map_io		= ep93xx_map_io,
	.init_irq	= ep93xx_init_irq,
269
	.handle_irq	= vic_handle_irq,
270 271
	.timer		= &ep93xx_timer,
	.init_machine	= edb93xx_init_machine,
272
	.init_late	= ep93xx_init_late,
273
	.restart	= ep93xx_restart,
274 275 276 277 278 279
MACHINE_END
#endif

#ifdef CONFIG_MACH_EDB9302A
MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
280
	.atag_offset	= 0x100,
281 282
	.map_io		= ep93xx_map_io,
	.init_irq	= ep93xx_init_irq,
283
	.handle_irq	= vic_handle_irq,
284 285
	.timer		= &ep93xx_timer,
	.init_machine	= edb93xx_init_machine,
286
	.init_late	= ep93xx_init_late,
287
	.restart	= ep93xx_restart,
288 289 290 291 292 293
MACHINE_END
#endif

#ifdef CONFIG_MACH_EDB9307
MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
294
	.atag_offset	= 0x100,
295 296
	.map_io		= ep93xx_map_io,
	.init_irq	= ep93xx_init_irq,
297
	.handle_irq	= vic_handle_irq,
298 299
	.timer		= &ep93xx_timer,
	.init_machine	= edb93xx_init_machine,
300
	.init_late	= ep93xx_init_late,
301
	.restart	= ep93xx_restart,
302 303 304 305 306 307
MACHINE_END
#endif

#ifdef CONFIG_MACH_EDB9307A
MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
308
	.atag_offset	= 0x100,
309 310
	.map_io		= ep93xx_map_io,
	.init_irq	= ep93xx_init_irq,
311
	.handle_irq	= vic_handle_irq,
312 313
	.timer		= &ep93xx_timer,
	.init_machine	= edb93xx_init_machine,
314
	.init_late	= ep93xx_init_late,
315
	.restart	= ep93xx_restart,
316 317 318 319 320 321
MACHINE_END
#endif

#ifdef CONFIG_MACH_EDB9312
MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
	/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
322
	.atag_offset	= 0x100,
323 324
	.map_io		= ep93xx_map_io,
	.init_irq	= ep93xx_init_irq,
325
	.handle_irq	= vic_handle_irq,
326 327
	.timer		= &ep93xx_timer,
	.init_machine	= edb93xx_init_machine,
328
	.init_late	= ep93xx_init_late,
329
	.restart	= ep93xx_restart,
330 331 332 333 334 335
MACHINE_END
#endif

#ifdef CONFIG_MACH_EDB9315
MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
336
	.atag_offset	= 0x100,
337 338
	.map_io		= ep93xx_map_io,
	.init_irq	= ep93xx_init_irq,
339
	.handle_irq	= vic_handle_irq,
340 341
	.timer		= &ep93xx_timer,
	.init_machine	= edb93xx_init_machine,
342
	.init_late	= ep93xx_init_late,
343
	.restart	= ep93xx_restart,
344 345 346 347 348 349
MACHINE_END
#endif

#ifdef CONFIG_MACH_EDB9315A
MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
350
	.atag_offset	= 0x100,
351 352
	.map_io		= ep93xx_map_io,
	.init_irq	= ep93xx_init_irq,
353
	.handle_irq	= vic_handle_irq,
354 355
	.timer		= &ep93xx_timer,
	.init_machine	= edb93xx_init_machine,
356
	.init_late	= ep93xx_init_late,
357
	.restart	= ep93xx_restart,
358 359
MACHINE_END
#endif