hid-wiimote-ext.c 22.7 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
/*
 * HID driver for Nintendo Wiimote extension devices
 * Copyright (c) 2011 David Herrmann
 */

/*
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the Free
 * Software Foundation; either version 2 of the License, or (at your option)
 * any later version.
 */

#include <linux/atomic.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include "hid-wiimote.h"

struct wiimote_ext {
	struct wiimote_data *wdata;
	struct work_struct worker;
22 23
	struct input_dev *input;
	struct input_dev *mp_input;
24 25 26 27

	atomic_t opened;
	atomic_t mp_opened;
	bool plugged;
D
David Herrmann 已提交
28
	bool mp_plugged;
29 30 31 32 33 34 35 36
	bool motionp;
	__u8 ext_type;
};

enum wiiext_type {
	WIIEXT_NONE,		/* placeholder */
	WIIEXT_CLASSIC,		/* Nintendo classic controller */
	WIIEXT_NUNCHUCK,	/* Nintendo nunchuck controller */
37
	WIIEXT_BALANCE_BOARD,	/* Nintendo balance board controller */
38 39
};

D
David Herrmann 已提交
40 41 42
enum wiiext_keys {
	WIIEXT_KEY_C,
	WIIEXT_KEY_Z,
43 44 45 46 47 48 49 50 51 52 53 54 55 56 57
	WIIEXT_KEY_A,
	WIIEXT_KEY_B,
	WIIEXT_KEY_X,
	WIIEXT_KEY_Y,
	WIIEXT_KEY_ZL,
	WIIEXT_KEY_ZR,
	WIIEXT_KEY_PLUS,
	WIIEXT_KEY_MINUS,
	WIIEXT_KEY_HOME,
	WIIEXT_KEY_LEFT,
	WIIEXT_KEY_RIGHT,
	WIIEXT_KEY_UP,
	WIIEXT_KEY_DOWN,
	WIIEXT_KEY_LT,
	WIIEXT_KEY_RT,
D
David Herrmann 已提交
58 59 60 61 62 63
	WIIEXT_KEY_COUNT
};

static __u16 wiiext_keymap[] = {
	BTN_C,		/* WIIEXT_KEY_C */
	BTN_Z,		/* WIIEXT_KEY_Z */
64 65 66 67 68 69 70 71 72 73 74 75 76 77 78
	BTN_A,		/* WIIEXT_KEY_A */
	BTN_B,		/* WIIEXT_KEY_B */
	BTN_X,		/* WIIEXT_KEY_X */
	BTN_Y,		/* WIIEXT_KEY_Y */
	BTN_TL2,	/* WIIEXT_KEY_ZL */
	BTN_TR2,	/* WIIEXT_KEY_ZR */
	KEY_NEXT,	/* WIIEXT_KEY_PLUS */
	KEY_PREVIOUS,	/* WIIEXT_KEY_MINUS */
	BTN_MODE,	/* WIIEXT_KEY_HOME */
	KEY_LEFT,	/* WIIEXT_KEY_LEFT */
	KEY_RIGHT,	/* WIIEXT_KEY_RIGHT */
	KEY_UP,		/* WIIEXT_KEY_UP */
	KEY_DOWN,	/* WIIEXT_KEY_DOWN */
	BTN_TL,		/* WIIEXT_KEY_LT */
	BTN_TR,		/* WIIEXT_KEY_RT */
D
David Herrmann 已提交
79 80
};

81
/* disable all extensions */
82 83 84
static void ext_disable(struct wiimote_ext *ext)
{
	unsigned long flags;
85 86 87 88 89 90
	__u8 wmem = 0x55;

	if (!wiimote_cmd_acquire(ext->wdata)) {
		wiimote_cmd_write(ext->wdata, 0xa400f0, &wmem, sizeof(wmem));
		wiimote_cmd_release(ext->wdata);
	}
91 92 93 94

	spin_lock_irqsave(&ext->wdata->state.lock, flags);
	ext->motionp = false;
	ext->ext_type = WIIEXT_NONE;
95
	wiiproto_req_drm(ext->wdata, WIIPROTO_REQ_NULL);
96 97 98 99 100
	spin_unlock_irqrestore(&ext->wdata->state.lock, flags);
}

static bool motionp_read(struct wiimote_ext *ext)
{
101 102 103 104
	__u8 rmem[2], wmem;
	ssize_t ret;
	bool avail = false;

105 106 107
	if (!atomic_read(&ext->mp_opened))
		return false;

108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124
	if (wiimote_cmd_acquire(ext->wdata))
		return false;

	/* initialize motion plus */
	wmem = 0x55;
	ret = wiimote_cmd_write(ext->wdata, 0xa600f0, &wmem, sizeof(wmem));
	if (ret)
		goto error;

	/* read motion plus ID */
	ret = wiimote_cmd_read(ext->wdata, 0xa600fe, rmem, 2);
	if (ret == 2 || rmem[1] == 0x5)
		avail = true;

error:
	wiimote_cmd_release(ext->wdata);
	return avail;
125 126 127 128
}

static __u8 ext_read(struct wiimote_ext *ext)
{
129 130 131 132
	ssize_t ret;
	__u8 rmem[2], wmem;
	__u8 type = WIIEXT_NONE;

133
	if (!ext->plugged || !atomic_read(&ext->opened))
134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154
		return WIIEXT_NONE;

	if (wiimote_cmd_acquire(ext->wdata))
		return WIIEXT_NONE;

	/* initialize extension */
	wmem = 0x55;
	ret = wiimote_cmd_write(ext->wdata, 0xa400f0, &wmem, sizeof(wmem));
	if (!ret) {
		/* disable encryption */
		wmem = 0x0;
		wiimote_cmd_write(ext->wdata, 0xa400fb, &wmem, sizeof(wmem));
	}

	/* read extension ID */
	ret = wiimote_cmd_read(ext->wdata, 0xa400fe, rmem, 2);
	if (ret == 2) {
		if (rmem[0] == 0 && rmem[1] == 0)
			type = WIIEXT_NUNCHUCK;
		else if (rmem[0] == 0x01 && rmem[1] == 0x01)
			type = WIIEXT_CLASSIC;
155 156
		else if (rmem[0] == 0x04 && rmem[1] == 0x02)
			type = WIIEXT_BALANCE_BOARD;
157 158 159 160 161
	}

	wiimote_cmd_release(ext->wdata);

	return type;
162 163 164 165 166
}

static void ext_enable(struct wiimote_ext *ext, bool motionp, __u8 ext_type)
{
	unsigned long flags;
167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185
	__u8 wmem;
	int ret;

	if (motionp) {
		if (wiimote_cmd_acquire(ext->wdata))
			return;

		if (ext_type == WIIEXT_CLASSIC)
			wmem = 0x07;
		else if (ext_type == WIIEXT_NUNCHUCK)
			wmem = 0x05;
		else
			wmem = 0x04;

		ret = wiimote_cmd_write(ext->wdata, 0xa600fe, &wmem, sizeof(wmem));
		wiimote_cmd_release(ext->wdata);
		if (ret)
			return;
	}
186 187 188 189

	spin_lock_irqsave(&ext->wdata->state.lock, flags);
	ext->motionp = motionp;
	ext->ext_type = ext_type;
190
	wiiproto_req_drm(ext->wdata, WIIPROTO_REQ_NULL);
191 192 193
	spin_unlock_irqrestore(&ext->wdata->state.lock, flags);
}

194 195 196 197
static void wiiext_worker(struct work_struct *work)
{
	struct wiimote_ext *ext = container_of(work, struct wiimote_ext,
									worker);
198 199 200 201 202 203 204
	bool motionp;
	__u8 ext_type;

	ext_disable(ext);
	motionp = motionp_read(ext);
	ext_type = ext_read(ext);
	ext_enable(ext, motionp, ext_type);
205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229
}

/* schedule work only once, otherwise mark for reschedule */
static void wiiext_schedule(struct wiimote_ext *ext)
{
	queue_work(system_nrt_wq, &ext->worker);
}

/*
 * Reacts on extension port events
 * Whenever the driver gets an event from the wiimote that an extension has been
 * plugged or unplugged, this funtion shall be called. It checks what extensions
 * are connected and initializes and activates them.
 * This can be called in atomic context. The initialization is done in a
 * separate worker thread. The state.lock spinlock must be held by the caller.
 */
void wiiext_event(struct wiimote_data *wdata, bool plugged)
{
	if (!wdata->ext)
		return;

	if (wdata->ext->plugged == plugged)
		return;

	wdata->ext->plugged = plugged;
D
David Herrmann 已提交
230 231 232 233

	if (!plugged)
		wdata->ext->mp_plugged = false;

234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255
	/*
	 * We need to call wiiext_schedule(wdata->ext) here, however, the
	 * extension initialization logic is not fully understood and so
	 * automatic initialization is not supported, yet.
	 */
}

/*
 * Returns true if the current DRM mode should contain extension data and false
 * if there is no interest in extension data.
 * All supported extensions send 6 byte extension data so any DRM that contains
 * extension bytes is fine.
 * The caller must hold the state.lock spinlock.
 */
bool wiiext_active(struct wiimote_data *wdata)
{
	if (!wdata->ext)
		return false;

	return wdata->ext->motionp || wdata->ext->ext_type;
}

256 257
static void handler_motionp(struct wiimote_ext *ext, const __u8 *payload)
{
D
David Herrmann 已提交
258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314
	__s32 x, y, z;
	bool plugged;

	/*        |   8    7    6    5    4    3 |  2  |  1  |
	 *   -----+------------------------------+-----+-----+
	 *    1   |               Yaw Speed <7:0>            |
	 *    2   |              Roll Speed <7:0>            |
	 *    3   |             Pitch Speed <7:0>            |
	 *   -----+------------------------------+-----+-----+
	 *    4   |       Yaw Speed <13:8>       | Yaw |Pitch|
	 *   -----+------------------------------+-----+-----+
	 *    5   |      Roll Speed <13:8>       |Roll | Ext |
	 *   -----+------------------------------+-----+-----+
	 *    6   |     Pitch Speed <13:8>       |  1  |  0  |
	 *   -----+------------------------------+-----+-----+
	 * The single bits Yaw, Roll, Pitch in the lower right corner specify
	 * whether the wiimote is rotating fast (0) or slow (1). Speed for slow
	 * roation is 440 deg/s and for fast rotation 2000 deg/s. To get a
	 * linear scale we multiply by 2000/440 = ~4.5454 which is 18 for fast
	 * and 9 for slow.
	 * If the wiimote is not rotating the sensor reports 2^13 = 8192.
	 * Ext specifies whether an extension is connected to the motionp.
	 */

	x = payload[0];
	y = payload[1];
	z = payload[2];

	x |= (((__u16)payload[3]) << 6) & 0xff00;
	y |= (((__u16)payload[4]) << 6) & 0xff00;
	z |= (((__u16)payload[5]) << 6) & 0xff00;

	x -= 8192;
	y -= 8192;
	z -= 8192;

	if (!(payload[3] & 0x02))
		x *= 18;
	else
		x *= 9;
	if (!(payload[4] & 0x02))
		y *= 18;
	else
		y *= 9;
	if (!(payload[3] & 0x01))
		z *= 18;
	else
		z *= 9;

	input_report_abs(ext->mp_input, ABS_RX, x);
	input_report_abs(ext->mp_input, ABS_RY, y);
	input_report_abs(ext->mp_input, ABS_RZ, z);
	input_sync(ext->mp_input);

	plugged = payload[5] & 0x01;
	if (plugged != ext->mp_plugged)
		ext->mp_plugged = plugged;
315 316 317 318
}

static void handler_nunchuck(struct wiimote_ext *ext, const __u8 *payload)
{
D
David Herrmann 已提交
319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394
	__s16 x, y, z, bx, by;

	/*   Byte |   8    7 |  6    5 |  4    3 |  2 |  1  |
	 *   -----+----------+---------+---------+----+-----+
	 *    1   |              Button X <7:0>             |
	 *    2   |              Button Y <7:0>             |
	 *   -----+----------+---------+---------+----+-----+
	 *    3   |               Speed X <9:2>             |
	 *    4   |               Speed Y <9:2>             |
	 *    5   |               Speed Z <9:2>             |
	 *   -----+----------+---------+---------+----+-----+
	 *    6   | Z <1:0>  | Y <1:0> | X <1:0> | BC | BZ  |
	 *   -----+----------+---------+---------+----+-----+
	 * Button X/Y is the analog stick. Speed X, Y and Z are the
	 * accelerometer data in the same format as the wiimote's accelerometer.
	 * The 6th byte contains the LSBs of the accelerometer data.
	 * BC and BZ are the C and Z buttons: 0 means pressed
	 *
	 * If reported interleaved with motionp, then the layout changes. The
	 * 5th and 6th byte changes to:
	 *   -----+-----------------------------------+-----+
	 *    5   |            Speed Z <9:3>          | EXT |
	 *   -----+--------+-----+-----+----+----+----+-----+
	 *    6   |Z <2:1> |Y <1>|X <1>| BC | BZ | 0  |  0  |
	 *   -----+--------+-----+-----+----+----+----+-----+
	 * All three accelerometer values lose their LSB. The other data is
	 * still available but slightly moved.
	 *
	 * Center data for button values is 128. Center value for accelerometer
	 * values it 512 / 0x200
	 */

	bx = payload[0];
	by = payload[1];
	bx -= 128;
	by -= 128;

	x = payload[2] << 2;
	y = payload[3] << 2;
	z = payload[4] << 2;

	if (ext->motionp) {
		x |= (payload[5] >> 3) & 0x02;
		y |= (payload[5] >> 4) & 0x02;
		z &= ~0x4;
		z |= (payload[5] >> 5) & 0x06;
	} else {
		x |= (payload[5] >> 2) & 0x03;
		y |= (payload[5] >> 4) & 0x03;
		z |= (payload[5] >> 6) & 0x03;
	}

	x -= 0x200;
	y -= 0x200;
	z -= 0x200;

	input_report_abs(ext->input, ABS_HAT0X, bx);
	input_report_abs(ext->input, ABS_HAT0Y, by);

	input_report_abs(ext->input, ABS_RX, x);
	input_report_abs(ext->input, ABS_RY, y);
	input_report_abs(ext->input, ABS_RZ, z);

	if (ext->motionp) {
		input_report_key(ext->input,
			wiiext_keymap[WIIEXT_KEY_Z], !!(payload[5] & 0x04));
		input_report_key(ext->input,
			wiiext_keymap[WIIEXT_KEY_C], !!(payload[5] & 0x08));
	} else {
		input_report_key(ext->input,
			wiiext_keymap[WIIEXT_KEY_Z], !!(payload[5] & 0x01));
		input_report_key(ext->input,
			wiiext_keymap[WIIEXT_KEY_C], !!(payload[5] & 0x02));
	}

	input_sync(ext->input);
395 396 397 398
}

static void handler_classic(struct wiimote_ext *ext, const __u8 *payload)
{
399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512
	__s8 rx, ry, lx, ly, lt, rt;

	/*   Byte |  8  |  7  |  6  |  5  |  4  |  3  |  2  |  1  |
	 *   -----+-----+-----+-----+-----+-----+-----+-----+-----+
	 *    1   | RX <5:4>  |              LX <5:0>             |
	 *    2   | RX <3:2>  |              LY <5:0>             |
	 *   -----+-----+-----+-----+-----------------------------+
	 *    3   |RX<1>| LT <5:4>  |         RY <5:1>            |
	 *   -----+-----+-----------+-----------------------------+
	 *    4   |     LT <3:1>    |         RT <5:1>            |
	 *   -----+-----+-----+-----+-----+-----+-----+-----+-----+
	 *    5   | BDR | BDD | BLT | B-  | BH  | B+  | BRT |  1  |
	 *   -----+-----+-----+-----+-----+-----+-----+-----+-----+
	 *    6   | BZL | BB  | BY  | BA  | BX  | BZR | BDL | BDU |
	 *   -----+-----+-----+-----+-----+-----+-----+-----+-----+
	 * All buttons are 0 if pressed
	 * RX and RY are right analog stick
	 * LX and LY are left analog stick
	 * LT is left trigger, RT is right trigger
	 * BLT is 0 if left trigger is fully pressed
	 * BRT is 0 if right trigger is fully pressed
	 * BDR, BDD, BDL, BDU form the D-Pad with right, down, left, up buttons
	 * BZL is left Z button and BZR is right Z button
	 * B-, BH, B+ are +, HOME and - buttons
	 * BB, BY, BA, BX are A, B, X, Y buttons
	 * LSB of RX, RY, LT, and RT are not transmitted and always 0.
	 *
	 * With motionp enabled it changes slightly to this:
	 *   Byte |  8  |  7  |  6  |  5  |  4  |  3  |  2  |  1  |
	 *   -----+-----+-----+-----+-----+-----+-----+-----+-----+
	 *    1   | RX <4:3>  |          LX <5:1>           | BDU |
	 *    2   | RX <2:1>  |          LY <5:1>           | BDL |
	 *   -----+-----+-----+-----+-----------------------+-----+
	 *    3   |RX<0>| LT <4:3>  |         RY <4:0>            |
	 *   -----+-----+-----------+-----------------------------+
	 *    4   |     LT <2:0>    |         RT <4:0>            |
	 *   -----+-----+-----+-----+-----+-----+-----+-----+-----+
	 *    5   | BDR | BDD | BLT | B-  | BH  | B+  | BRT | EXT |
	 *   -----+-----+-----+-----+-----+-----+-----+-----+-----+
	 *    6   | BZL | BB  | BY  | BA  | BX  | BZR |  0  |  0  |
	 *   -----+-----+-----+-----+-----+-----+-----+-----+-----+
	 * Only the LSBs of LX and LY are lost. BDU and BDL are moved, the rest
	 * is the same as before.
	 */

	if (ext->motionp) {
		lx = payload[0] & 0x3e;
		ly = payload[0] & 0x3e;
	} else {
		lx = payload[0] & 0x3f;
		ly = payload[0] & 0x3f;
	}

	rx = (payload[0] >> 3) & 0x14;
	rx |= (payload[1] >> 5) & 0x06;
	rx |= (payload[2] >> 7) & 0x01;
	ry = payload[2] & 0x1f;

	rt = payload[3] & 0x1f;
	lt = (payload[2] >> 2) & 0x18;
	lt |= (payload[3] >> 5) & 0x07;

	rx <<= 1;
	ry <<= 1;
	rt <<= 1;
	lt <<= 1;

	input_report_abs(ext->input, ABS_HAT1X, lx - 0x20);
	input_report_abs(ext->input, ABS_HAT1Y, ly - 0x20);
	input_report_abs(ext->input, ABS_HAT2X, rx - 0x20);
	input_report_abs(ext->input, ABS_HAT2Y, ry - 0x20);
	input_report_abs(ext->input, ABS_HAT3X, rt - 0x20);
	input_report_abs(ext->input, ABS_HAT3Y, lt - 0x20);

	input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_RIGHT],
							!!(payload[4] & 0x80));
	input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_DOWN],
							!!(payload[4] & 0x40));
	input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_LT],
							!!(payload[4] & 0x20));
	input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_MINUS],
							!!(payload[4] & 0x10));
	input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_HOME],
							!!(payload[4] & 0x08));
	input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_PLUS],
							!!(payload[4] & 0x04));
	input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_RT],
							!!(payload[4] & 0x02));
	input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_ZL],
							!!(payload[5] & 0x80));
	input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_B],
							!!(payload[5] & 0x40));
	input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_Y],
							!!(payload[5] & 0x20));
	input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_A],
							!!(payload[5] & 0x10));
	input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_X],
							!!(payload[5] & 0x08));
	input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_ZR],
							!!(payload[5] & 0x04));

	if (ext->motionp) {
		input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_UP],
							!!(payload[0] & 0x01));
		input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_LEFT],
							!!(payload[1] & 0x01));
	} else {
		input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_UP],
							!!(payload[5] & 0x01));
		input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_LEFT],
							!!(payload[5] & 0x02));
	}

	input_sync(ext->input);
513 514
}

515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563
static void handler_balance_board(struct wiimote_ext *ext, const __u8 *payload)
{
	__s32 val[4];

	/*   Byte |  8  7  6  5  4  3  2  1  |
	 *   -----+--------------------------+
	 *    1   |    Top Right <15:8>      |
	 *    2   |    Top Right  <7:0>      |
	 *   -----+--------------------------+
	 *    3   | Bottom Right <15:8>      |
	 *    4   | Bottom Right  <7:0>      |
	 *   -----+--------------------------+
	 *    5   |     Top Left <15:8>      |
	 *    6   |     Top Left  <7:0>      |
	 *   -----+--------------------------+
	 *    7   |  Bottom Left <15:8>      |
	 *    8   |  Bottom Left  <7:0>      |
	 *   -----+--------------------------+
	 *
	 * These values represent the weight-measurements of the Wii-balance
	 * board with 16bit precision.
	 *
	 * The balance-board is never reported interleaved with motionp.
	 */

	val[0] = payload[0];
	val[0] <<= 8;
	val[0] |= payload[1];

	val[1] = payload[2];
	val[1] <<= 8;
	val[1] |= payload[3];

	val[2] = payload[4];
	val[2] <<= 8;
	val[2] |= payload[5];

	val[3] = payload[6];
	val[3] <<= 8;
	val[3] |= payload[7];

	input_report_abs(ext->input, ABS_HAT0X, val[0]);
	input_report_abs(ext->input, ABS_HAT0Y, val[1]);
	input_report_abs(ext->input, ABS_HAT1X, val[2]);
	input_report_abs(ext->input, ABS_HAT1Y, val[3]);

	input_sync(ext->input);
}

564 565 566 567 568 569 570 571 572 573 574 575 576 577
/* call this with state.lock spinlock held */
void wiiext_handle(struct wiimote_data *wdata, const __u8 *payload)
{
	struct wiimote_ext *ext = wdata->ext;

	if (!ext)
		return;

	if (ext->motionp && (payload[5] & 0x02)) {
		handler_motionp(ext, payload);
	} else if (ext->ext_type == WIIEXT_NUNCHUCK) {
		handler_nunchuck(ext, payload);
	} else if (ext->ext_type == WIIEXT_CLASSIC) {
		handler_classic(ext, payload);
578 579
	} else if (ext->ext_type == WIIEXT_BALANCE_BOARD) {
		handler_balance_board(ext, payload);
580 581 582
	}
}

583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607
static ssize_t wiiext_show(struct device *dev, struct device_attribute *attr,
								char *buf)
{
	struct wiimote_data *wdata = dev_to_wii(dev);
	__u8 type = WIIEXT_NONE;
	bool motionp = false;
	unsigned long flags;

	spin_lock_irqsave(&wdata->state.lock, flags);
	if (wdata->ext) {
		motionp = wdata->ext->motionp;
		type = wdata->ext->ext_type;
	}
	spin_unlock_irqrestore(&wdata->state.lock, flags);

	if (type == WIIEXT_NUNCHUCK) {
		if (motionp)
			return sprintf(buf, "motionp+nunchuck\n");
		else
			return sprintf(buf, "nunchuck\n");
	} else if (type == WIIEXT_CLASSIC) {
		if (motionp)
			return sprintf(buf, "motionp+classic\n");
		else
			return sprintf(buf, "classic\n");
608 609 610 611 612
	} else if (type == WIIEXT_BALANCE_BOARD) {
		if (motionp)
			return sprintf(buf, "motionp+balanceboard\n");
		else
			return sprintf(buf, "balanceboard\n");
613 614 615 616 617 618 619 620 621 622
	} else {
		if (motionp)
			return sprintf(buf, "motionp\n");
		else
			return sprintf(buf, "none\n");
	}
}

static DEVICE_ATTR(extension, S_IRUGO, wiiext_show, NULL);

623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670
static int wiiext_input_open(struct input_dev *dev)
{
	struct wiimote_ext *ext = input_get_drvdata(dev);
	int ret;

	ret = hid_hw_open(ext->wdata->hdev);
	if (ret)
		return ret;

	atomic_inc(&ext->opened);
	wiiext_schedule(ext);

	return 0;
}

static void wiiext_input_close(struct input_dev *dev)
{
	struct wiimote_ext *ext = input_get_drvdata(dev);

	atomic_dec(&ext->opened);
	wiiext_schedule(ext);
	hid_hw_close(ext->wdata->hdev);
}

static int wiiext_mp_open(struct input_dev *dev)
{
	struct wiimote_ext *ext = input_get_drvdata(dev);
	int ret;

	ret = hid_hw_open(ext->wdata->hdev);
	if (ret)
		return ret;

	atomic_inc(&ext->mp_opened);
	wiiext_schedule(ext);

	return 0;
}

static void wiiext_mp_close(struct input_dev *dev)
{
	struct wiimote_ext *ext = input_get_drvdata(dev);

	atomic_dec(&ext->mp_opened);
	wiiext_schedule(ext);
	hid_hw_close(ext->wdata->hdev);
}

671 672 673 674 675
/* Initializes the extension driver of a wiimote */
int wiiext_init(struct wiimote_data *wdata)
{
	struct wiimote_ext *ext;
	unsigned long flags;
D
David Herrmann 已提交
676
	int ret, i;
677 678 679 680 681 682 683 684

	ext = kzalloc(sizeof(*ext), GFP_KERNEL);
	if (!ext)
		return -ENOMEM;

	ext->wdata = wdata;
	INIT_WORK(&ext->worker, wiiext_worker);

685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700
	ext->input = input_allocate_device();
	if (!ext->input) {
		ret = -ENOMEM;
		goto err_input;
	}

	input_set_drvdata(ext->input, ext);
	ext->input->open = wiiext_input_open;
	ext->input->close = wiiext_input_close;
	ext->input->dev.parent = &wdata->hdev->dev;
	ext->input->id.bustype = wdata->hdev->bus;
	ext->input->id.vendor = wdata->hdev->vendor;
	ext->input->id.product = wdata->hdev->product;
	ext->input->id.version = wdata->hdev->version;
	ext->input->name = WIIMOTE_NAME " Extension";

D
David Herrmann 已提交
701 702 703 704 705 706 707
	set_bit(EV_KEY, ext->input->evbit);
	for (i = 0; i < WIIEXT_KEY_COUNT; ++i)
		set_bit(wiiext_keymap[i], ext->input->keybit);

	set_bit(EV_ABS, ext->input->evbit);
	set_bit(ABS_HAT0X, ext->input->absbit);
	set_bit(ABS_HAT0Y, ext->input->absbit);
708 709 710 711 712 713
	set_bit(ABS_HAT1X, ext->input->absbit);
	set_bit(ABS_HAT1Y, ext->input->absbit);
	set_bit(ABS_HAT2X, ext->input->absbit);
	set_bit(ABS_HAT2Y, ext->input->absbit);
	set_bit(ABS_HAT3X, ext->input->absbit);
	set_bit(ABS_HAT3Y, ext->input->absbit);
D
David Herrmann 已提交
714 715
	input_set_abs_params(ext->input, ABS_HAT0X, -120, 120, 2, 4);
	input_set_abs_params(ext->input, ABS_HAT0Y, -120, 120, 2, 4);
716 717 718 719 720 721
	input_set_abs_params(ext->input, ABS_HAT1X, -30, 30, 1, 1);
	input_set_abs_params(ext->input, ABS_HAT1Y, -30, 30, 1, 1);
	input_set_abs_params(ext->input, ABS_HAT2X, -30, 30, 1, 1);
	input_set_abs_params(ext->input, ABS_HAT2Y, -30, 30, 1, 1);
	input_set_abs_params(ext->input, ABS_HAT3X, -30, 30, 1, 1);
	input_set_abs_params(ext->input, ABS_HAT3Y, -30, 30, 1, 1);
D
David Herrmann 已提交
722 723 724 725 726 727 728
	set_bit(ABS_RX, ext->input->absbit);
	set_bit(ABS_RY, ext->input->absbit);
	set_bit(ABS_RZ, ext->input->absbit);
	input_set_abs_params(ext->input, ABS_RX, -500, 500, 2, 4);
	input_set_abs_params(ext->input, ABS_RY, -500, 500, 2, 4);
	input_set_abs_params(ext->input, ABS_RZ, -500, 500, 2, 4);

729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750
	ret = input_register_device(ext->input);
	if (ret) {
		input_free_device(ext->input);
		goto err_input;
	}

	ext->mp_input = input_allocate_device();
	if (!ext->mp_input) {
		ret = -ENOMEM;
		goto err_mp;
	}

	input_set_drvdata(ext->mp_input, ext);
	ext->mp_input->open = wiiext_mp_open;
	ext->mp_input->close = wiiext_mp_close;
	ext->mp_input->dev.parent = &wdata->hdev->dev;
	ext->mp_input->id.bustype = wdata->hdev->bus;
	ext->mp_input->id.vendor = wdata->hdev->vendor;
	ext->mp_input->id.product = wdata->hdev->product;
	ext->mp_input->id.version = wdata->hdev->version;
	ext->mp_input->name = WIIMOTE_NAME " Motion+";

D
David Herrmann 已提交
751 752 753 754 755 756 757 758
	set_bit(EV_ABS, ext->mp_input->evbit);
	set_bit(ABS_RX, ext->mp_input->absbit);
	set_bit(ABS_RY, ext->mp_input->absbit);
	set_bit(ABS_RZ, ext->mp_input->absbit);
	input_set_abs_params(ext->mp_input, ABS_RX, -160000, 160000, 4, 8);
	input_set_abs_params(ext->mp_input, ABS_RY, -160000, 160000, 4, 8);
	input_set_abs_params(ext->mp_input, ABS_RZ, -160000, 160000, 4, 8);

759 760 761 762 763 764
	ret = input_register_device(ext->mp_input);
	if (ret) {
		input_free_device(ext->mp_input);
		goto err_mp;
	}

765 766
	ret = device_create_file(&wdata->hdev->dev, &dev_attr_extension);
	if (ret)
767
		goto err_dev;
768

769 770 771 772 773
	spin_lock_irqsave(&wdata->state.lock, flags);
	wdata->ext = ext;
	spin_unlock_irqrestore(&wdata->state.lock, flags);

	return 0;
774

775 776 777 778 779
err_dev:
	input_unregister_device(ext->mp_input);
err_mp:
	input_unregister_device(ext->input);
err_input:
780 781
	kfree(ext);
	return ret;
782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804
}

/* Deinitializes the extension driver of a wiimote */
void wiiext_deinit(struct wiimote_data *wdata)
{
	struct wiimote_ext *ext = wdata->ext;
	unsigned long flags;

	if (!ext)
		return;

	/*
	 * We first unset wdata->ext to avoid further input from the wiimote
	 * core. The worker thread does not access this pointer so it is not
	 * affected by this.
	 * We kill the worker after this so it does not get respawned during
	 * deinitialization.
	 */

	spin_lock_irqsave(&wdata->state.lock, flags);
	wdata->ext = NULL;
	spin_unlock_irqrestore(&wdata->state.lock, flags);

805
	device_remove_file(&wdata->hdev->dev, &dev_attr_extension);
806 807
	input_unregister_device(ext->mp_input);
	input_unregister_device(ext->input);
808

809 810 811
	cancel_work_sync(&ext->worker);
	kfree(ext);
}