ftrace.h 26.4 KB
Newer Older
1 2 3 4 5
/*
 * Ftrace header.  For implementation details beyond the random comments
 * scattered below, see: Documentation/trace/ftrace-design.txt
 */

6 7 8
#ifndef _LINUX_FTRACE_H
#define _LINUX_FTRACE_H

9
#include <linux/trace_clock.h>
10
#include <linux/kallsyms.h>
11
#include <linux/linkage.h>
12
#include <linux/bitops.h>
13
#include <linux/ptrace.h>
14
#include <linux/ktime.h>
15
#include <linux/sched.h>
16 17 18
#include <linux/types.h>
#include <linux/init.h>
#include <linux/fs.h>
19

20 21
#include <asm/ftrace.h>

22 23 24 25 26 27 28 29 30
/*
 * If the arch supports passing the variable contents of
 * function_trace_op as the third parameter back from the
 * mcount call, then the arch should define this as 1.
 */
#ifndef ARCH_SUPPORTS_FTRACE_OPS
#define ARCH_SUPPORTS_FTRACE_OPS 0
#endif

31 32 33 34 35 36 37 38 39 40 41 42 43
/*
 * If the arch's mcount caller does not support all of ftrace's
 * features, then it must call an indirect function that
 * does. Or at least does enough to prevent any unwelcomed side effects.
 */
#if !defined(CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST) || \
	!ARCH_SUPPORTS_FTRACE_OPS
# define FTRACE_FORCE_LIST_FUNC 1
#else
# define FTRACE_FORCE_LIST_FUNC 0
#endif


44
struct module;
45 46
struct ftrace_hash;

47
#ifdef CONFIG_FUNCTION_TRACER
I
Ingo Molnar 已提交
48

49 50 51
extern int ftrace_enabled;
extern int
ftrace_enable_sysctl(struct ctl_table *table, int write,
52
		     void __user *buffer, size_t *lenp,
53 54
		     loff_t *ppos);

55 56 57
struct ftrace_ops;

typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip,
58
			      struct ftrace_ops *op, struct pt_regs *regs);
59

60 61 62 63 64 65 66 67 68 69 70
/*
 * FTRACE_OPS_FL_* bits denote the state of ftrace_ops struct and are
 * set in the flags member.
 *
 * ENABLED - set/unset when ftrace_ops is registered/unregistered
 * DYNAMIC - set when ftrace_ops is registered to denote dynamically
 *           allocated ftrace_ops which need special care
 * CONTROL - set manualy by ftrace_ops user to denote the ftrace_ops
 *           could be controled by following calls:
 *             ftrace_function_local_enable
 *             ftrace_function_local_disable
71 72 73
 * SAVE_REGS - The ftrace_ops wants regs saved at each function called
 *            and passed to the callback. If this flag is set, but the
 *            architecture does not support passing regs
74
 *            (CONFIG_DYNAMIC_FTRACE_WITH_REGS is not defined), then the
75 76 77 78 79 80 81 82 83 84
 *            ftrace_ops will fail to register, unless the next flag
 *            is set.
 * SAVE_REGS_IF_SUPPORTED - This is the same as SAVE_REGS, but if the
 *            handler can handle an arch that does not save regs
 *            (the handler tests if regs == NULL), then it can set
 *            this flag instead. It will not fail registering the ftrace_ops
 *            but, the regs field will be NULL if the arch does not support
 *            passing regs to the handler.
 *            Note, if this flag is set, the SAVE_REGS flag will automatically
 *            get set upon registering the ftrace_ops, if the arch supports it.
85 86 87 88
 * RECURSION_SAFE - The ftrace_ops can set this to tell the ftrace infrastructure
 *            that the call back has its own recursion protection. If it does
 *            not set this, then the ftrace infrastructure will add recursion
 *            protection for the caller.
89
 * STUB   - The ftrace_ops is just a place holder.
90 91
 * INITIALIZED - The ftrace_ops has already been initialized (first use time
 *            register_ftrace_function() is called, it will initialized the ops)
92
 * DELETED - The ops are being deleted, do not let them be registered again.
93
 */
94
enum {
95
	FTRACE_OPS_FL_ENABLED			= 1 << 0,
96 97 98 99 100 101 102 103
	FTRACE_OPS_FL_DYNAMIC			= 1 << 1,
	FTRACE_OPS_FL_CONTROL			= 1 << 2,
	FTRACE_OPS_FL_SAVE_REGS			= 1 << 3,
	FTRACE_OPS_FL_SAVE_REGS_IF_SUPPORTED	= 1 << 4,
	FTRACE_OPS_FL_RECURSION_SAFE		= 1 << 5,
	FTRACE_OPS_FL_STUB			= 1 << 6,
	FTRACE_OPS_FL_INITIALIZED		= 1 << 7,
	FTRACE_OPS_FL_DELETED			= 1 << 8,
104 105
};

106 107 108 109 110 111 112 113 114 115 116
/*
 * Note, ftrace_ops can be referenced outside of RCU protection.
 * (Although, for perf, the control ops prevent that). If ftrace_ops is
 * allocated and not part of kernel core data, the unregistering of it will
 * perform a scheduling on all CPUs to make sure that there are no more users.
 * Depending on the load of the system that may take a bit of time.
 *
 * Any private data added must also take care not to be freed and if private
 * data is added to a ftrace_ops that is in core code, the user of the
 * ftrace_ops must perform a schedule_on_each_cpu() before freeing it.
 */
117
struct ftrace_ops {
118 119
	ftrace_func_t			func;
	struct ftrace_ops		*next;
120
	unsigned long			flags;
121
	int __percpu			*disabled;
122
	void				*private;
123 124 125
#ifdef CONFIG_DYNAMIC_FTRACE
	struct ftrace_hash		*notrace_hash;
	struct ftrace_hash		*filter_hash;
126
	struct mutex			regex_lock;
127
#endif
128 129
};

130 131
extern int function_trace_stop;

132 133 134 135 136 137 138 139 140 141 142
/*
 * Type of the current tracing.
 */
enum ftrace_tracing_type_t {
	FTRACE_TYPE_ENTER = 0, /* Hook the call of the function */
	FTRACE_TYPE_RETURN,	/* Hook the return of the function */
};

/* Current tracing type, default is FTRACE_TYPE_ENTER */
extern enum ftrace_tracing_type_t ftrace_tracing_type;

143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168
/**
 * ftrace_stop - stop function tracer.
 *
 * A quick way to stop the function tracer. Note this an on off switch,
 * it is not something that is recursive like preempt_disable.
 * This does not disable the calling of mcount, it only stops the
 * calling of functions from mcount.
 */
static inline void ftrace_stop(void)
{
	function_trace_stop = 1;
}

/**
 * ftrace_start - start the function tracer.
 *
 * This function is the inverse of ftrace_stop. This does not enable
 * the function tracing if the function tracer is disabled. This only
 * sets the function tracer flag to continue calling the functions
 * from mcount.
 */
static inline void ftrace_start(void)
{
	function_trace_stop = 0;
}

169 170 171 172 173 174 175 176 177 178 179
/*
 * The ftrace_ops must be a static and should also
 * be read_mostly.  These functions do modify read_mostly variables
 * so use them sparely. Never free an ftrace_op or modify the
 * next pointer after it has been registered. Even after unregistering
 * it, the next pointer may still be used internally.
 */
int register_ftrace_function(struct ftrace_ops *ops);
int unregister_ftrace_function(struct ftrace_ops *ops);
void clear_ftrace_function(void);

180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228
/**
 * ftrace_function_local_enable - enable controlled ftrace_ops on current cpu
 *
 * This function enables tracing on current cpu by decreasing
 * the per cpu control variable.
 * It must be called with preemption disabled and only on ftrace_ops
 * registered with FTRACE_OPS_FL_CONTROL. If called without preemption
 * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
 */
static inline void ftrace_function_local_enable(struct ftrace_ops *ops)
{
	if (WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL)))
		return;

	(*this_cpu_ptr(ops->disabled))--;
}

/**
 * ftrace_function_local_disable - enable controlled ftrace_ops on current cpu
 *
 * This function enables tracing on current cpu by decreasing
 * the per cpu control variable.
 * It must be called with preemption disabled and only on ftrace_ops
 * registered with FTRACE_OPS_FL_CONTROL. If called without preemption
 * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
 */
static inline void ftrace_function_local_disable(struct ftrace_ops *ops)
{
	if (WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL)))
		return;

	(*this_cpu_ptr(ops->disabled))++;
}

/**
 * ftrace_function_local_disabled - returns ftrace_ops disabled value
 *                                  on current cpu
 *
 * This function returns value of ftrace_ops::disabled on current cpu.
 * It must be called with preemption disabled and only on ftrace_ops
 * registered with FTRACE_OPS_FL_CONTROL. If called without preemption
 * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
 */
static inline int ftrace_function_local_disabled(struct ftrace_ops *ops)
{
	WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL));
	return *this_cpu_ptr(ops->disabled);
}

229 230
extern void ftrace_stub(unsigned long a0, unsigned long a1,
			struct ftrace_ops *op, struct pt_regs *regs);
231

232
#else /* !CONFIG_FUNCTION_TRACER */
233 234 235 236 237 238
/*
 * (un)register_ftrace_function must be a macro since the ops parameter
 * must not be evaluated.
 */
#define register_ftrace_function(ops) ({ 0; })
#define unregister_ftrace_function(ops) ({ 0; })
239 240 241 242
static inline int ftrace_nr_registered_ops(void)
{
	return 0;
}
243
static inline void clear_ftrace_function(void) { }
244
static inline void ftrace_kill(void) { }
245 246
static inline void ftrace_stop(void) { }
static inline void ftrace_start(void) { }
247
#endif /* CONFIG_FUNCTION_TRACER */
248

249 250 251 252
#ifdef CONFIG_STACK_TRACER
extern int stack_tracer_enabled;
int
stack_trace_sysctl(struct ctl_table *table, int write,
253
		   void __user *buffer, size_t *lenp,
254 255 256
		   loff_t *ppos);
#endif

257 258 259
struct ftrace_func_command {
	struct list_head	list;
	char			*name;
260 261
	int			(*func)(struct ftrace_hash *hash,
					char *func, char *cmd,
262 263 264
					char *params, int enable);
};

265
#ifdef CONFIG_DYNAMIC_FTRACE
266

267 268 269
int ftrace_arch_code_modify_prepare(void);
int ftrace_arch_code_modify_post_process(void);

270 271
void ftrace_bug(int err, unsigned long ip);

272 273
struct seq_file;

S
Steven Rostedt 已提交
274
struct ftrace_probe_ops {
275 276 277
	void			(*func)(unsigned long ip,
					unsigned long parent_ip,
					void **data);
278 279 280 281
	int			(*init)(struct ftrace_probe_ops *ops,
					unsigned long ip, void **data);
	void			(*free)(struct ftrace_probe_ops *ops,
					unsigned long ip, void **data);
282 283
	int			(*print)(struct seq_file *m,
					 unsigned long ip,
S
Steven Rostedt 已提交
284
					 struct ftrace_probe_ops *ops,
285
					 void *data);
286 287 288
};

extern int
S
Steven Rostedt 已提交
289
register_ftrace_function_probe(char *glob, struct ftrace_probe_ops *ops,
290 291
			      void *data);
extern void
S
Steven Rostedt 已提交
292
unregister_ftrace_function_probe(char *glob, struct ftrace_probe_ops *ops,
293 294
				void *data);
extern void
S
Steven Rostedt 已提交
295 296
unregister_ftrace_function_probe_func(char *glob, struct ftrace_probe_ops *ops);
extern void unregister_ftrace_function_probe_all(char *glob);
297

298
extern int ftrace_text_reserved(const void *start, const void *end);
299

300 301
extern int ftrace_nr_registered_ops(void);

302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318
/*
 * The dyn_ftrace record's flags field is split into two parts.
 * the first part which is '0-FTRACE_REF_MAX' is a counter of
 * the number of callbacks that have registered the function that
 * the dyn_ftrace descriptor represents.
 *
 * The second part is a mask:
 *  ENABLED - the function is being traced
 *  REGS    - the record wants the function to save regs
 *  REGS_EN - the function is set up to save regs.
 *
 * When a new ftrace_ops is registered and wants a function to save
 * pt_regs, the rec->flag REGS is set. When the function has been
 * set up to save regs, the REG_EN flag is set. Once a function
 * starts saving regs it will do so until all ftrace_ops are removed
 * from tracing that function.
 */
319
enum {
320 321 322
	FTRACE_FL_ENABLED	= (1UL << 29),
	FTRACE_FL_REGS		= (1UL << 30),
	FTRACE_FL_REGS_EN	= (1UL << 31)
323 324
};

325 326
#define FTRACE_FL_MASK		(0x7UL << 29)
#define FTRACE_REF_MAX		((1UL << 29) - 1)
327

328
struct dyn_ftrace {
329
	unsigned long		ip; /* address of mcount call-site */
330
	unsigned long		flags;
331
	struct dyn_arch_ftrace	arch;
332 333
};

S
Steven Rostedt 已提交
334
int ftrace_force_update(void);
335 336
int ftrace_set_filter_ip(struct ftrace_ops *ops, unsigned long ip,
			 int remove, int reset);
337
int ftrace_set_filter(struct ftrace_ops *ops, unsigned char *buf,
338
		       int len, int reset);
339
int ftrace_set_notrace(struct ftrace_ops *ops, unsigned char *buf,
340 341 342
			int len, int reset);
void ftrace_set_global_filter(unsigned char *buf, int len, int reset);
void ftrace_set_global_notrace(unsigned char *buf, int len, int reset);
343
void ftrace_free_filter(struct ftrace_ops *ops);
S
Steven Rostedt 已提交
344

345 346 347
int register_ftrace_command(struct ftrace_func_command *cmd);
int unregister_ftrace_command(struct ftrace_func_command *cmd);

348 349 350 351 352 353 354 355
enum {
	FTRACE_UPDATE_CALLS		= (1 << 0),
	FTRACE_DISABLE_CALLS		= (1 << 1),
	FTRACE_UPDATE_TRACE_FUNC	= (1 << 2),
	FTRACE_START_FUNC_RET		= (1 << 3),
	FTRACE_STOP_FUNC_RET		= (1 << 4),
};

356 357 358 359 360 361 362 363 364 365 366
/*
 * The FTRACE_UPDATE_* enum is used to pass information back
 * from the ftrace_update_record() and ftrace_test_record()
 * functions. These are called by the code update routines
 * to find out what is to be done for a given function.
 *
 *  IGNORE           - The function is already what we want it to be
 *  MAKE_CALL        - Start tracing the function
 *  MODIFY_CALL      - Stop saving regs for the function
 *  MAKE_NOP         - Stop tracing the function
 */
367 368 369
enum {
	FTRACE_UPDATE_IGNORE,
	FTRACE_UPDATE_MAKE_CALL,
370
	FTRACE_UPDATE_MODIFY_CALL,
371 372 373
	FTRACE_UPDATE_MAKE_NOP,
};

374 375 376 377
enum {
	FTRACE_ITER_FILTER	= (1 << 0),
	FTRACE_ITER_NOTRACE	= (1 << 1),
	FTRACE_ITER_PRINTALL	= (1 << 2),
378 379 380
	FTRACE_ITER_DO_HASH	= (1 << 3),
	FTRACE_ITER_HASH	= (1 << 4),
	FTRACE_ITER_ENABLED	= (1 << 5),
381 382
};

383 384 385 386 387 388 389 390
void arch_ftrace_update_code(int command);

struct ftrace_rec_iter;

struct ftrace_rec_iter *ftrace_rec_iter_start(void);
struct ftrace_rec_iter *ftrace_rec_iter_next(struct ftrace_rec_iter *iter);
struct dyn_ftrace *ftrace_rec_iter_record(struct ftrace_rec_iter *iter);

391 392 393 394 395 396
#define for_ftrace_rec_iter(iter)		\
	for (iter = ftrace_rec_iter_start();	\
	     iter;				\
	     iter = ftrace_rec_iter_next(iter))


397 398 399
int ftrace_update_record(struct dyn_ftrace *rec, int enable);
int ftrace_test_record(struct dyn_ftrace *rec, int enable);
void ftrace_run_stop_machine(int command);
400
unsigned long ftrace_location(unsigned long ip);
401 402
unsigned long ftrace_get_addr_new(struct dyn_ftrace *rec);
unsigned long ftrace_get_addr_curr(struct dyn_ftrace *rec);
403 404 405

extern ftrace_func_t ftrace_trace_function;

406 407 408 409 410 411 412 413
int ftrace_regex_open(struct ftrace_ops *ops, int flag,
		  struct inode *inode, struct file *file);
ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf,
			    size_t cnt, loff_t *ppos);
ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf,
			     size_t cnt, loff_t *ppos);
int ftrace_regex_release(struct inode *inode, struct file *file);

414 415 416
void __init
ftrace_set_early_filter(struct ftrace_ops *ops, char *buf, int enable);

417
/* defined in arch */
418
extern int ftrace_ip_converted(unsigned long ip);
419
extern int ftrace_dyn_arch_init(void);
420
extern void ftrace_replace_code(int enable);
421 422
extern int ftrace_update_ftrace_func(ftrace_func_t func);
extern void ftrace_caller(void);
423
extern void ftrace_regs_caller(void);
424
extern void ftrace_call(void);
425
extern void ftrace_regs_call(void);
426
extern void mcount_call(void);
427

428 429
void ftrace_modify_all_code(int command);

430 431 432
#ifndef FTRACE_ADDR
#define FTRACE_ADDR ((unsigned long)ftrace_caller)
#endif
433 434

#ifndef FTRACE_REGS_ADDR
435
#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
436 437 438 439 440 441
# define FTRACE_REGS_ADDR ((unsigned long)ftrace_regs_caller)
#else
# define FTRACE_REGS_ADDR FTRACE_ADDR
#endif
#endif

442 443
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
extern void ftrace_graph_caller(void);
444 445 446 447 448
extern int ftrace_enable_ftrace_graph_caller(void);
extern int ftrace_disable_ftrace_graph_caller(void);
#else
static inline int ftrace_enable_ftrace_graph_caller(void) { return 0; }
static inline int ftrace_disable_ftrace_graph_caller(void) { return 0; }
449
#endif
450

451
/**
452
 * ftrace_make_nop - convert code into nop
453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473
 * @mod: module structure if called by module load initialization
 * @rec: the mcount call site record
 * @addr: the address that the call site should be calling
 *
 * This is a very sensitive operation and great care needs
 * to be taken by the arch.  The operation should carefully
 * read the location, check to see if what is read is indeed
 * what we expect it to be, and then on success of the compare,
 * it should write to the location.
 *
 * The code segment at @rec->ip should be a caller to @addr
 *
 * Return must be:
 *  0 on success
 *  -EFAULT on error reading the location
 *  -EINVAL on a failed compare of the contents
 *  -EPERM  on error writing to the location
 * Any other value will be considered a failure.
 */
extern int ftrace_make_nop(struct module *mod,
			   struct dyn_ftrace *rec, unsigned long addr);
S
Steven Rostedt 已提交
474

475
/**
476 477 478
 * ftrace_make_call - convert a nop call site into a call to addr
 * @rec: the mcount call site record
 * @addr: the address that the call site should call
479 480 481 482 483 484 485
 *
 * This is a very sensitive operation and great care needs
 * to be taken by the arch.  The operation should carefully
 * read the location, check to see if what is read is indeed
 * what we expect it to be, and then on success of the compare,
 * it should write to the location.
 *
486 487
 * The code segment at @rec->ip should be a nop
 *
488 489 490 491 492 493 494
 * Return must be:
 *  0 on success
 *  -EFAULT on error reading the location
 *  -EINVAL on a failed compare of the contents
 *  -EPERM  on error writing to the location
 * Any other value will be considered a failure.
 */
495 496
extern int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr);

497
#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529
/**
 * ftrace_modify_call - convert from one addr to another (no nop)
 * @rec: the mcount call site record
 * @old_addr: the address expected to be currently called to
 * @addr: the address to change to
 *
 * This is a very sensitive operation and great care needs
 * to be taken by the arch.  The operation should carefully
 * read the location, check to see if what is read is indeed
 * what we expect it to be, and then on success of the compare,
 * it should write to the location.
 *
 * The code segment at @rec->ip should be a caller to @old_addr
 *
 * Return must be:
 *  0 on success
 *  -EFAULT on error reading the location
 *  -EINVAL on a failed compare of the contents
 *  -EPERM  on error writing to the location
 * Any other value will be considered a failure.
 */
extern int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
			      unsigned long addr);
#else
/* Should never be called */
static inline int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
				     unsigned long addr)
{
	return -EINVAL;
}
#endif

530 531
/* May be defined in arch */
extern int ftrace_arch_read_dyn_info(char *buf, int size);
532

A
Abhishek Sagar 已提交
533
extern int skip_trace(unsigned long ip);
534
extern void ftrace_module_init(struct module *mod);
A
Abhishek Sagar 已提交
535

536 537
extern void ftrace_disable_daemon(void);
extern void ftrace_enable_daemon(void);
538
#else /* CONFIG_DYNAMIC_FTRACE */
539 540 541 542
static inline int skip_trace(unsigned long ip) { return 0; }
static inline int ftrace_force_update(void) { return 0; }
static inline void ftrace_disable_daemon(void) { }
static inline void ftrace_enable_daemon(void) { }
543
static inline void ftrace_release_mod(struct module *mod) {}
544
static inline void ftrace_module_init(struct module *mod) {}
545
static inline __init int register_ftrace_command(struct ftrace_func_command *cmd)
546
{
547
	return -EINVAL;
548
}
549
static inline __init int unregister_ftrace_command(char *cmd_name)
550
{
551
	return -EINVAL;
552
}
553
static inline int ftrace_text_reserved(const void *start, const void *end)
554 555 556
{
	return 0;
}
557 558 559 560
static inline unsigned long ftrace_location(unsigned long ip)
{
	return 0;
}
561 562 563 564 565 566 567

/*
 * Again users of functions that have ftrace_ops may not
 * have them defined when ftrace is not enabled, but these
 * functions may still be called. Use a macro instead of inline.
 */
#define ftrace_regex_open(ops, flag, inod, file) ({ -ENODEV; })
568
#define ftrace_set_early_filter(ops, buf, enable) do { } while (0)
569
#define ftrace_set_filter_ip(ops, ip, remove, reset) ({ -ENODEV; })
570 571 572
#define ftrace_set_filter(ops, buf, len, reset) ({ -ENODEV; })
#define ftrace_set_notrace(ops, buf, len, reset) ({ -ENODEV; })
#define ftrace_free_filter(ops) do { } while (0)
573 574 575 576 577 578 579

static inline ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf,
			    size_t cnt, loff_t *ppos) { return -ENODEV; }
static inline ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf,
			     size_t cnt, loff_t *ppos) { return -ENODEV; }
static inline int
ftrace_regex_release(struct inode *inode, struct file *file) { return -ENODEV; }
A
Abhishek Sagar 已提交
580
#endif /* CONFIG_DYNAMIC_FTRACE */
581

I
Ingo Molnar 已提交
582 583 584
/* totally disable ftrace - can not re-enable after this */
void ftrace_kill(void);

I
Ingo Molnar 已提交
585 586
static inline void tracer_disable(void)
{
587
#ifdef CONFIG_FUNCTION_TRACER
I
Ingo Molnar 已提交
588 589 590 591
	ftrace_enabled = 0;
#endif
}

592 593
/*
 * Ftrace disable/restore without lock. Some synchronization mechanism
594
 * must be used to prevent ftrace_enabled to be changed between
595 596
 * disable/restore.
 */
597 598
static inline int __ftrace_enabled_save(void)
{
599
#ifdef CONFIG_FUNCTION_TRACER
600 601 602 603 604 605 606 607 608 609
	int saved_ftrace_enabled = ftrace_enabled;
	ftrace_enabled = 0;
	return saved_ftrace_enabled;
#else
	return 0;
#endif
}

static inline void __ftrace_enabled_restore(int enabled)
{
610
#ifdef CONFIG_FUNCTION_TRACER
611 612 613 614
	ftrace_enabled = enabled;
#endif
}

615 616 617 618 619 620 621
/* All archs should have this, but we define it for consistency */
#ifndef ftrace_return_address0
# define ftrace_return_address0 __builtin_return_address(0)
#endif

/* Archs may use other ways for ADDR1 and beyond */
#ifndef ftrace_return_address
622
# ifdef CONFIG_FRAME_POINTER
623
#  define ftrace_return_address(n) __builtin_return_address(n)
624
# else
625
#  define ftrace_return_address(n) 0UL
626
# endif
627 628 629 630 631 632 633 634 635
#endif

#define CALLER_ADDR0 ((unsigned long)ftrace_return_address0)
#define CALLER_ADDR1 ((unsigned long)ftrace_return_address(1))
#define CALLER_ADDR2 ((unsigned long)ftrace_return_address(2))
#define CALLER_ADDR3 ((unsigned long)ftrace_return_address(3))
#define CALLER_ADDR4 ((unsigned long)ftrace_return_address(4))
#define CALLER_ADDR5 ((unsigned long)ftrace_return_address(5))
#define CALLER_ADDR6 ((unsigned long)ftrace_return_address(6))
636

637
#ifdef CONFIG_IRQSOFF_TRACER
I
Ingo Molnar 已提交
638 639
  extern void time_hardirqs_on(unsigned long a0, unsigned long a1);
  extern void time_hardirqs_off(unsigned long a0, unsigned long a1);
640
#else
641 642
  static inline void time_hardirqs_on(unsigned long a0, unsigned long a1) { }
  static inline void time_hardirqs_off(unsigned long a0, unsigned long a1) { }
643 644
#endif

645
#ifdef CONFIG_PREEMPT_TRACER
I
Ingo Molnar 已提交
646 647
  extern void trace_preempt_on(unsigned long a0, unsigned long a1);
  extern void trace_preempt_off(unsigned long a0, unsigned long a1);
648
#else
649 650 651 652 653 654
/*
 * Use defines instead of static inlines because some arches will make code out
 * of the CALLER_ADDR, when we really want these to be a real nop.
 */
# define trace_preempt_on(a0, a1) do { } while (0)
# define trace_preempt_off(a0, a1) do { } while (0)
655 656
#endif

657 658 659 660 661 662
#ifdef CONFIG_FTRACE_MCOUNT_RECORD
extern void ftrace_init(void);
#else
static inline void ftrace_init(void) { }
#endif

663 664 665 666 667 668 669
/*
 * Structure that defines an entry function trace.
 */
struct ftrace_graph_ent {
	unsigned long func; /* Current function */
	int depth;
};
670

671 672 673
/*
 * Structure that defines a return function trace.
 */
674
struct ftrace_graph_ret {
675 676 677
	unsigned long func; /* Current function */
	unsigned long long calltime;
	unsigned long long rettime;
678 679
	/* Number of functions that overran the depth limit for current task */
	unsigned long overrun;
680
	int depth;
681 682
};

683 684 685 686
/* Type of the callback handlers for tracing function graph*/
typedef void (*trace_func_graph_ret_t)(struct ftrace_graph_ret *); /* return */
typedef int (*trace_func_graph_ent_t)(struct ftrace_graph_ent *); /* entry */

687
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
688

689
/* for init task */
690
#define INIT_FTRACE_GRAPH		.ret_stack = NULL,
691

692 693 694 695 696 697 698 699 700
/*
 * Stack of return addresses for functions
 * of a thread.
 * Used in struct thread_info
 */
struct ftrace_ret_stack {
	unsigned long ret;
	unsigned long func;
	unsigned long long calltime;
701
	unsigned long long subtime;
702
	unsigned long fp;
703 704 705 706 707 708 709 710 711 712
};

/*
 * Primary handler of a function return.
 * It relays on ftrace_return_to_handler.
 * Defined in entry_32/64.S
 */
extern void return_to_handler(void);

extern int
713 714
ftrace_push_return_trace(unsigned long ret, unsigned long func, int *depth,
			 unsigned long frame_pointer);
715

716 717 718 719 720 721 722
/*
 * Sometimes we don't want to trace a function with the function
 * graph tracer but we want them to keep traced by the usual function
 * tracer if the function graph tracer is not configured.
 */
#define __notrace_funcgraph		notrace

723 724 725 726 727 728 729 730 731 732
/*
 * We want to which function is an entrypoint of a hardirq.
 * That will help us to put a signal on output.
 */
#define __irq_entry		 __attribute__((__section__(".irqentry.text")))

/* Limits of hardirq entrypoints */
extern char __irqentry_text_start[];
extern char __irqentry_text_end[];

733
#define FTRACE_NOTRACE_DEPTH 65536
734 735
#define FTRACE_RETFUNC_DEPTH 50
#define FTRACE_RETSTACK_ALLOC_SIZE 32
736 737 738
extern int register_ftrace_graph(trace_func_graph_ret_t retfunc,
				trace_func_graph_ent_t entryfunc);

S
Steven Rostedt 已提交
739 740
extern void ftrace_graph_stop(void);

741 742 743
/* The current handlers in use */
extern trace_func_graph_ret_t ftrace_graph_return;
extern trace_func_graph_ent_t ftrace_graph_entry;
744

745
extern void unregister_ftrace_graph(void);
746

747 748
extern void ftrace_graph_init_task(struct task_struct *t);
extern void ftrace_graph_exit_task(struct task_struct *t);
749
extern void ftrace_graph_init_idle_task(struct task_struct *t, int cpu);
750 751 752 753 754

static inline int task_curr_ret_stack(struct task_struct *t)
{
	return t->curr_ret_stack;
}
755 756 757 758 759 760 761 762 763 764

static inline void pause_graph_tracing(void)
{
	atomic_inc(&current->tracing_graph_pause);
}

static inline void unpause_graph_tracing(void)
{
	atomic_dec(&current->tracing_graph_pause);
}
765
#else /* !CONFIG_FUNCTION_GRAPH_TRACER */
766 767

#define __notrace_funcgraph
768
#define __irq_entry
769
#define INIT_FTRACE_GRAPH
770

771 772
static inline void ftrace_graph_init_task(struct task_struct *t) { }
static inline void ftrace_graph_exit_task(struct task_struct *t) { }
773
static inline void ftrace_graph_init_idle_task(struct task_struct *t, int cpu) { }
774

775 776 777 778 779 780 781
static inline int register_ftrace_graph(trace_func_graph_ret_t retfunc,
			  trace_func_graph_ent_t entryfunc)
{
	return -1;
}
static inline void unregister_ftrace_graph(void) { }

782 783 784 785
static inline int task_curr_ret_stack(struct task_struct *tsk)
{
	return -1;
}
786 787 788

static inline void pause_graph_tracing(void) { }
static inline void unpause_graph_tracing(void) { }
789
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
790

791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832
#ifdef CONFIG_TRACING

/* flags for current->trace */
enum {
	TSK_TRACE_FL_TRACE_BIT	= 0,
	TSK_TRACE_FL_GRAPH_BIT	= 1,
};
enum {
	TSK_TRACE_FL_TRACE	= 1 << TSK_TRACE_FL_TRACE_BIT,
	TSK_TRACE_FL_GRAPH	= 1 << TSK_TRACE_FL_GRAPH_BIT,
};

static inline void set_tsk_trace_trace(struct task_struct *tsk)
{
	set_bit(TSK_TRACE_FL_TRACE_BIT, &tsk->trace);
}

static inline void clear_tsk_trace_trace(struct task_struct *tsk)
{
	clear_bit(TSK_TRACE_FL_TRACE_BIT, &tsk->trace);
}

static inline int test_tsk_trace_trace(struct task_struct *tsk)
{
	return tsk->trace & TSK_TRACE_FL_TRACE;
}

static inline void set_tsk_trace_graph(struct task_struct *tsk)
{
	set_bit(TSK_TRACE_FL_GRAPH_BIT, &tsk->trace);
}

static inline void clear_tsk_trace_graph(struct task_struct *tsk)
{
	clear_bit(TSK_TRACE_FL_GRAPH_BIT, &tsk->trace);
}

static inline int test_tsk_trace_graph(struct task_struct *tsk)
{
	return tsk->trace & TSK_TRACE_FL_GRAPH;
}

833 834 835
enum ftrace_dump_mode;

extern enum ftrace_dump_mode ftrace_dump_on_oops;
836

837 838 839
extern void disable_trace_on_warning(void);
extern int __disable_trace_on_warning;

840 841 842 843
#ifdef CONFIG_PREEMPT
#define INIT_TRACE_RECURSION		.trace_recursion = 0,
#endif

844 845
#else /* CONFIG_TRACING */
static inline void  disable_trace_on_warning(void) { }
846 847
#endif /* CONFIG_TRACING */

848 849 850
#ifndef INIT_TRACE_RECURSION
#define INIT_TRACE_RECURSION
#endif
851

852 853 854 855 856 857
#ifdef CONFIG_FTRACE_SYSCALLS

unsigned long arch_syscall_addr(int nr);

#endif /* CONFIG_FTRACE_SYSCALLS */

858
#endif /* _LINUX_FTRACE_H */