mach-mx27_3ds.c 10.9 KB
Newer Older
1
// SPDX-License-Identifier: GPL-2.0-or-later
2 3 4 5 6 7
/*
 * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
 *
 * Author: Fabio Estevam <fabio.estevam@freescale.com>
 */

8 9 10 11 12 13
/*
 * This machine is known as:
 *  - i.MX27 3-Stack Development System
 *  - i.MX27 Platform Development Kit (i.MX27 PDK)
 */

14 15
#include <linux/platform_device.h>
#include <linux/gpio.h>
16
#include <linux/gpio/machine.h>
17
#include <linux/irq.h>
18 19 20
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <linux/delay.h>
21 22 23
#include <linux/mfd/mc13783.h>
#include <linux/spi/spi.h>
#include <linux/regulator/machine.h>
24

25 26 27 28
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>

29
#include "3ds_debugboard.h"
30
#include "common.h"
31
#include "devices-imx27.h"
32
#include "ehci.h"
33
#include "hardware.h"
34
#include "iomux-mx27.h"
35
#include "ulpi.h"
36

37 38 39
#define SD1_EN_GPIO		IMX_GPIO_NR(2, 25)
#define OTG_PHY_RESET_GPIO	IMX_GPIO_NR(2, 23)
#define SPI2_SS0		IMX_GPIO_NR(4, 21)
40
#define PMIC_INT		IMX_GPIO_NR(3, 14)
41
#define SPI1_SS0		IMX_GPIO_NR(4, 28)
42
#define SD1_CD			IMX_GPIO_NR(2, 26)
43 44
#define LCD_RESET		IMX_GPIO_NR(1, 3)
#define LCD_ENABLE		IMX_GPIO_NR(1, 31)
45

46
static const int mx27pdk_pins[] __initconst = {
47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70
	/* UART1 */
	PE12_PF_UART1_TXD,
	PE13_PF_UART1_RXD,
	PE14_PF_UART1_CTS,
	PE15_PF_UART1_RTS,
	/* FEC */
	PD0_AIN_FEC_TXD0,
	PD1_AIN_FEC_TXD1,
	PD2_AIN_FEC_TXD2,
	PD3_AIN_FEC_TXD3,
	PD4_AOUT_FEC_RX_ER,
	PD5_AOUT_FEC_RXD1,
	PD6_AOUT_FEC_RXD2,
	PD7_AOUT_FEC_RXD3,
	PD8_AF_FEC_MDIO,
	PD9_AIN_FEC_MDC,
	PD10_AOUT_FEC_CRS,
	PD11_AOUT_FEC_TX_CLK,
	PD12_AOUT_FEC_RXD0,
	PD13_AOUT_FEC_RX_DV,
	PD14_AOUT_FEC_RX_CLK,
	PD15_AOUT_FEC_COL,
	PD16_AIN_FEC_TX_ER,
	PF23_AIN_FEC_TX_EN,
71 72 73 74 75 76 77 78
	/* SDHC1 */
	PE18_PF_SD1_D0,
	PE19_PF_SD1_D1,
	PE20_PF_SD1_D2,
	PE21_PF_SD1_D3,
	PE22_PF_SD1_CMD,
	PE23_PF_SD1_CLK,
	SD1_EN_GPIO | GPIO_GPIO | GPIO_OUT,
79 80 81 82 83 84 85 86 87 88 89 90 91 92
	/* OTG */
	OTG_PHY_RESET_GPIO | GPIO_GPIO | GPIO_OUT,
	PC7_PF_USBOTG_DATA5,
	PC8_PF_USBOTG_DATA6,
	PC9_PF_USBOTG_DATA0,
	PC10_PF_USBOTG_DATA2,
	PC11_PF_USBOTG_DATA1,
	PC12_PF_USBOTG_DATA4,
	PC13_PF_USBOTG_DATA3,
	PE0_PF_USBOTG_NXT,
	PE1_PF_USBOTG_STP,
	PE2_PF_USBOTG_DIR,
	PE24_PF_USBOTG_CLK,
	PE25_PF_USBOTG_DATA7,
93 94 95 96 97 98
	/* CSPI1 */
	PD31_PF_CSPI1_MOSI,
	PD30_PF_CSPI1_MISO,
	PD29_PF_CSPI1_SCLK,
	PD25_PF_CSPI1_RDY,
	SPI1_SS0 | GPIO_GPIO | GPIO_OUT,
99 100 101 102
	/* CSPI2 */
	PD22_PF_CSPI2_SCLK,
	PD23_PF_CSPI2_MISO,
	PD24_PF_CSPI2_MOSI,
103
	SPI2_SS0 | GPIO_GPIO | GPIO_OUT,
F
Fabio Estevam 已提交
104 105 106
	/* I2C1 */
	PD17_PF_I2C_DATA,
	PD18_PF_I2C_CLK,
107 108
	/* PMIC INT */
	PMIC_INT | GPIO_GPIO | GPIO_IN,
109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133
	/* LCD */
	PA5_PF_LSCLK,
	PA6_PF_LD0,
	PA7_PF_LD1,
	PA8_PF_LD2,
	PA9_PF_LD3,
	PA10_PF_LD4,
	PA11_PF_LD5,
	PA12_PF_LD6,
	PA13_PF_LD7,
	PA14_PF_LD8,
	PA15_PF_LD9,
	PA16_PF_LD10,
	PA17_PF_LD11,
	PA18_PF_LD12,
	PA19_PF_LD13,
	PA20_PF_LD14,
	PA21_PF_LD15,
	PA22_PF_LD16,
	PA23_PF_LD17,
	PA28_PF_HSYNC,
	PA29_PF_VSYNC,
	PA30_PF_CONTRAST,
	LCD_ENABLE | GPIO_GPIO | GPIO_OUT,
	LCD_RESET | GPIO_GPIO | GPIO_OUT,
F
Fabio Estevam 已提交
134 135 136 137 138
	/* SSI4 */
	PC16_PF_SSI4_FS,
	PC17_PF_SSI4_RXD,
	PC18_PF_SSI4_TXD,
	PC19_PF_SSI4_CLK,
139 140
};

141
static const struct imxuart_platform_data uart_pdata __initconst = {
142 143 144
	.flags = IMXUART_HAVE_RTSCTS,
};

145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160
/*
 * Matrix keyboard
 */

static const uint32_t mx27_3ds_keymap[] = {
	KEY(0, 0, KEY_UP),
	KEY(0, 1, KEY_DOWN),
	KEY(1, 0, KEY_RIGHT),
	KEY(1, 1, KEY_LEFT),
	KEY(1, 2, KEY_ENTER),
	KEY(2, 0, KEY_F6),
	KEY(2, 1, KEY_F8),
	KEY(2, 2, KEY_F9),
	KEY(2, 3, KEY_F10),
};

161
static const struct matrix_keymap_data mx27_3ds_keymap_data __initconst = {
162 163 164 165
	.keymap		= mx27_3ds_keymap,
	.keymap_size	= ARRAY_SIZE(mx27_3ds_keymap),
};

166 167 168
static int mx27_3ds_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
				void *data)
{
169 170
	return request_irq(gpio_to_irq(SD1_CD), detect_irq,
	IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
171 172 173 174
}

static void mx27_3ds_sdhc1_exit(struct device *dev, void *data)
{
175
	free_irq(gpio_to_irq(SD1_CD), data);
176 177
}

178
static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
179 180 181 182 183 184 185 186 187 188 189
	.init = mx27_3ds_sdhc1_init,
	.exit = mx27_3ds_sdhc1_exit,
};

static void mx27_3ds_sdhc1_enable_level_translator(void)
{
	/* Turn on TXB0108 OE pin */
	gpio_request(SD1_EN_GPIO, "sd1_enable");
	gpio_direction_output(SD1_EN_GPIO, 1);
}

190 191 192 193 194 195 196 197 198 199

static int otg_phy_init(void)
{
	gpio_request(OTG_PHY_RESET_GPIO, "usb-otg-reset");
	gpio_direction_output(OTG_PHY_RESET_GPIO, 0);
	mdelay(1);
	gpio_set_value(OTG_PHY_RESET_GPIO, 1);
	return 0;
}

200 201 202 203
static int mx27_3ds_otg_init(struct platform_device *pdev)
{
	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
}
204 205

static struct mxc_usbh_platform_data otg_pdata __initdata = {
206
	.init	= mx27_3ds_otg_init,
207 208 209 210 211 212 213 214
	.portsc	= MXC_EHCI_MODE_ULPI,
};

static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
	.operating_mode = FSL_USB2_DR_DEVICE,
	.phy_mode       = FSL_USB2_PHY_ULPI,
};

B
Benoît Thébaudeau 已提交
215
static bool otg_mode_host __initdata;
216 217 218 219

static int __init mx27_3ds_otg_mode(char *options)
{
	if (!strcmp(options, "host"))
B
Benoît Thébaudeau 已提交
220
		otg_mode_host = true;
221
	else if (!strcmp(options, "device"))
B
Benoît Thébaudeau 已提交
222
		otg_mode_host = false;
223 224 225
	else
		pr_info("otg_mode neither \"host\" nor \"device\". "
			"Defaulting to device\n");
B
Benoît Thébaudeau 已提交
226
	return 1;
227 228 229
}
__setup("otg_mode=", mx27_3ds_otg_mode);

230
/* Regulators */
231 232 233 234 235 236 237
static struct regulator_init_data gpo_init = {
	.constraints = {
		.boot_on = 1,
		.always_on = 1,
	}
};

238
static struct regulator_consumer_supply vmmc1_consumers[] = {
239
	REGULATOR_SUPPLY("vcore", "spi0.0"),
240 241 242 243 244 245
};

static struct regulator_init_data vmmc1_init = {
	.constraints = {
		.min_uV	= 2800000,
		.max_uV = 2800000,
246 247 248
		.apply_uV = 1,
		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
				  REGULATOR_CHANGE_STATUS,
249 250 251 252 253 254
	},
	.num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers),
	.consumer_supplies = vmmc1_consumers,
};

static struct regulator_consumer_supply vgen_consumers[] = {
255
	REGULATOR_SUPPLY("vdd", "spi0.0"),
256 257 258 259 260 261 262 263 264 265 266 267
};

static struct regulator_init_data vgen_init = {
	.constraints = {
		.min_uV	= 1800000,
		.max_uV = 1800000,
		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
	},
	.num_consumer_supplies = ARRAY_SIZE(vgen_consumers),
	.consumer_supplies = vgen_consumers,
};

268
static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = {
269
	{
270
		.id = MC13783_REG_VMMC1,
271 272
		.init_data = &vmmc1_init,
	}, {
273
		.id = MC13783_REG_VGEN,
274
		.init_data = &vgen_init,
275 276 277 278 279 280
	}, {
		.id = MC13783_REG_GPO1, /* Turn on 1.8V */
		.init_data = &gpo_init,
	}, {
		.id = MC13783_REG_GPO3, /* Turn on 3.3V */
		.init_data = &gpo_init,
281 282 283 284
	},
};

/* MC13783 */
F
Fabio Estevam 已提交
285 286 287 288 289
static struct mc13xxx_codec_platform_data mx27_3ds_codec = {
	.dac_ssi_port = MC13783_SSI1_PORT,
	.adc_ssi_port = MC13783_SSI1_PORT,
};

290 291 292 293 294 295
static struct mc13xxx_platform_data mc13783_pdata = {
	.regulators = {
		.regulators = mx27_3ds_regulators,
		.num_regulators = ARRAY_SIZE(mx27_3ds_regulators),

	},
F
Fabio Estevam 已提交
296 297 298 299 300 301 302
	.flags  = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC |
						MC13XXX_USE_CODEC,
	.codec = &mx27_3ds_codec,
};

static struct imx_ssi_platform_data mx27_3ds_ssi_pdata = {
	.flags = IMX_SSI_DMA | IMX_SSI_NET,
303 304 305
};

/* SPI */
306 307 308 309 310 311 312 313 314 315 316 317 318
static struct gpiod_lookup_table mx27_spi1_gpiod_table = {
	.dev_id = "imx27-cspi.0", /* Actual device name for spi1 */
	.table = {
		/*
		 * The i.MX27 has the i.MX21 GPIO controller, the SPI1 CS GPIO
		 * SPI1_SS0 is numbered IMX_GPIO_NR(4, 28).
		 *
		 * This is in "bank 4" which is subtracted by one in the macro
		 * so this is actually bank 3 on "imx21-gpio.3".
		 */
		GPIO_LOOKUP_IDX("imx21-gpio.3", 28, "cs", 0, GPIO_ACTIVE_LOW),
		{ },
	},
319 320
};

321 322 323 324 325 326 327 328 329 330 331 332 333
static struct gpiod_lookup_table mx27_spi2_gpiod_table = {
	.dev_id = "imx27-cspi.1", /* Actual device name for spi2 */
	.table = {
		/*
		 * The i.MX27 has the i.MX21 GPIO controller, the SPI2 CS GPIO
		 * SPI2_SS0 is numbered IMX_GPIO_NR(4, 21).
		 *
		 * This is in "bank 4" which is subtracted by one in the macro
		 * so this is actually bank 3 on "imx21-gpio.3".
		 */
		GPIO_LOOKUP_IDX("imx21-gpio.3", 21, "cs", 0, GPIO_ACTIVE_LOW),
		{ },
	},
334 335
};

336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368
static struct imx_fb_videomode mx27_3ds_modes[] = {
	{	/* 480x640 @ 60 Hz */
		.mode = {
			.name		= "Epson-VGA",
			.refresh	= 60,
			.xres		= 480,
			.yres		= 640,
			.pixclock	= 41701,
			.left_margin	= 20,
			.right_margin	= 41,
			.upper_margin	= 10,
			.lower_margin	= 5,
			.hsync_len	= 20,
			.vsync_len	= 10,
			.sync		= FB_SYNC_OE_ACT_HIGH |
						FB_SYNC_CLK_INVERT,
			.vmode		= FB_VMODE_NONINTERLACED,
			.flag		= 0,
		},
		.bpp		= 16,
		.pcr		= 0xFAC08B82,
	},
};

static const struct imx_fb_platform_data mx27_3ds_fb_data __initconst = {
	.mode = mx27_3ds_modes,
	.num_modes = ARRAY_SIZE(mx27_3ds_modes),
	.pwmr		= 0x00A903FF,
	.lscr1		= 0x00120300,
	.dmacr		= 0x00020010,
};

/* LCD */
369 370 371 372 373 374 375 376 377 378 379 380 381
static struct gpiod_lookup_table mx27_3ds_lcd_gpiod_table = {
	.dev_id = "spi0.0", /* Bus 0 chipselect 0 */
	.table = {
		/*
		 * The i.MX27 has the i.MX21 GPIO controller, the GPIOs
		 * numbered IMX_GPIO_NR(1, 3) and IMX_GPIO_NR(1, 31)
		 * are in "bank 1" which is subtracted by one in the macro
		 * so these are actually bank 0 on "imx21-gpio.0".
		 */
		GPIO_LOOKUP("imx21-gpio.0", 3, "reset", GPIO_ACTIVE_HIGH),
		GPIO_LOOKUP("imx21-gpio.0", 31, "enable", GPIO_ACTIVE_HIGH),
		{ },
	},
382 383
};

384 385 386 387 388 389 390
static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
	{
		.modalias	= "mc13783",
		.max_speed_hz	= 1000000,
		.bus_num	= 1,
		.chip_select	= 0, /* SS0 */
		.platform_data	= &mc13783_pdata,
391
		/* irq number is run-time assigned */
392
		.mode = SPI_CS_HIGH,
393 394 395 396 397
	}, {
		.modalias	= "l4f00242t03",
		.max_speed_hz	= 5000000,
		.bus_num	= 0,
		.chip_select	= 0, /* SS0 */
398 399 400
	},
};

F
Fabio Estevam 已提交
401 402 403
static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = {
	.bitrate = 100000,
};
404

405 406
static void __init mx27pdk_init(void)
{
407 408
	imx27_soc_init();

409 410
	mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
		"mx27pdk");
411
	imx27_add_imx_uart0(&uart_pdata);
412
	imx27_add_fec(NULL);
413
	imx27_add_imx_keypad(&mx27_3ds_keymap_data);
414
	imx27_add_imx2_wdt();
415

416 417
	imx27_add_spi_imx1(&mx27_spi2_gpiod_table);
	imx27_add_spi_imx0(&mx27_spi1_gpiod_table);
418 419 420 421 422 423 424 425 426 427 428 429

	imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
	imx27_add_imx_fb(&mx27_3ds_fb_data);

	imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata);
}

static void __init mx27pdk_late_init(void)
{
	mx27_3ds_sdhc1_enable_level_translator();
	imx27_add_mxc_mmc(0, &sdhc1_pdata);

430
	otg_phy_init();
431

432
	if (otg_mode_host) {
433 434
		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
				ULPI_OTG_DRVVBUS_EXT);
435

436 437
		if (otg_pdata.otg)
			imx27_add_mxc_ehci_otg(&otg_pdata);
438
	}
439

440 441 442
	if (!otg_mode_host)
		imx27_add_fsl_usb2_udc(&otg_device_pdata);

443
	gpiod_add_lookup_table(&mx27_3ds_lcd_gpiod_table);
444
	mx27_3ds_spi_devs[0].irq = gpio_to_irq(PMIC_INT);
445
	spi_register_board_info(mx27_3ds_spi_devs,
446
				ARRAY_SIZE(mx27_3ds_spi_devs));
447

448
	if (mxc_expio_init(MX27_CS5_BASE_ADDR, IMX_GPIO_NR(3, 28)))
449
		pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
450

F
Fabio Estevam 已提交
451 452

	imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
453 454 455 456 457 458 459 460 461
}

static void __init mx27pdk_timer_init(void)
{
	mx27_clocks_init(26000000);
}

MACHINE_START(MX27_3DS, "Freescale MX27PDK")
	/* maintainer: Freescale Semiconductor, Inc. */
462
	.atag_offset = 0x100,
463 464 465
	.map_io = mx27_map_io,
	.init_early = imx27_init_early,
	.init_irq = mx27_init_irq,
S
Stephen Warren 已提交
466
	.init_time	= mx27pdk_timer_init,
467
	.init_machine = mx27pdk_init,
468
	.init_late	= mx27pdk_late_init,
469
	.restart	= mxc_restart,
470
MACHINE_END