xpnet.c 18.9 KB
Newer Older
1 2 3 4 5
/*
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
6
 * Copyright (C) 1999-2008 Silicon Graphics, Inc. All rights reserved.
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
 */


/*
 * Cross Partition Network Interface (XPNET) support
 *
 *	XPNET provides a virtual network layered on top of the Cross
 *	Partition communication layer.
 *
 *	XPNET provides direct point-to-point and broadcast-like support
 *	for an ethernet-like device.  The ethernet broadcast medium is
 *	replaced with a point-to-point message structure which passes
 *	pointers to a DMA-capable block that a remote partition should
 *	retrieve and pass to the upper level networking layer.
 *
 */


#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/smp.h>
#include <linux/string.h>
#include <asm/sn/bte.h>
#include <asm/sn/io.h>
#include <asm/sn/sn_sal.h>
#include <asm/types.h>
#include <asm/atomic.h>
41
#include "xp.h"
42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130


/*
 * The message payload transferred by XPC.
 *
 * buf_pa is the physical address where the DMA should pull from.
 *
 * NOTE: for performance reasons, buf_pa should _ALWAYS_ begin on a
 * cacheline boundary.  To accomplish this, we record the number of
 * bytes from the beginning of the first cacheline to the first useful
 * byte of the skb (leadin_ignore) and the number of bytes from the
 * last useful byte of the skb to the end of the last cacheline
 * (tailout_ignore).
 *
 * size is the number of bytes to transfer which includes the skb->len
 * (useful bytes of the senders skb) plus the leadin and tailout
 */
struct xpnet_message {
	u16 version;		/* Version for this message */
	u16 embedded_bytes;	/* #of bytes embedded in XPC message */
	u32 magic;		/* Special number indicating this is xpnet */
	u64 buf_pa;		/* phys address of buffer to retrieve */
	u32 size;		/* #of bytes in buffer */
	u8 leadin_ignore;	/* #of bytes to ignore at the beginning */
	u8 tailout_ignore;	/* #of bytes to ignore at the end */
	unsigned char data;	/* body of small packets */
};

/*
 * Determine the size of our message, the cacheline aligned size,
 * and then the number of message will request from XPC.
 *
 * XPC expects each message to exist in an individual cacheline.
 */
#define XPNET_MSG_SIZE		(L1_CACHE_BYTES - XPC_MSG_PAYLOAD_OFFSET)
#define XPNET_MSG_DATA_MAX	\
		(XPNET_MSG_SIZE - (u64)(&((struct xpnet_message *)0)->data))
#define XPNET_MSG_ALIGNED_SIZE	(L1_CACHE_ALIGN(XPNET_MSG_SIZE))
#define XPNET_MSG_NENTRIES	(PAGE_SIZE / XPNET_MSG_ALIGNED_SIZE)


#define XPNET_MAX_KTHREADS	(XPNET_MSG_NENTRIES + 1)
#define XPNET_MAX_IDLE_KTHREADS	(XPNET_MSG_NENTRIES + 1)

/*
 * Version number of XPNET implementation. XPNET can always talk to versions
 * with same major #, and never talk to versions with a different version.
 */
#define _XPNET_VERSION(_major, _minor)	(((_major) << 4) | (_minor))
#define XPNET_VERSION_MAJOR(_v)		((_v) >> 4)
#define XPNET_VERSION_MINOR(_v)		((_v) & 0xf)

#define	XPNET_VERSION _XPNET_VERSION(1,0)		/* version 1.0 */
#define	XPNET_VERSION_EMBED _XPNET_VERSION(1,1)		/* version 1.1 */
#define XPNET_MAGIC	0x88786984 /* "XNET" */

#define XPNET_VALID_MSG(_m)						     \
   ((XPNET_VERSION_MAJOR(_m->version) == XPNET_VERSION_MAJOR(XPNET_VERSION)) \
    && (msg->magic == XPNET_MAGIC))

#define XPNET_DEVICE_NAME		"xp0"


/*
 * When messages are queued with xpc_send_notify, a kmalloc'd buffer
 * of the following type is passed as a notification cookie.  When the
 * notification function is called, we use the cookie to decide
 * whether all outstanding message sends have completed.  The skb can
 * then be released.
 */
struct xpnet_pending_msg {
	struct list_head free_list;
	struct sk_buff *skb;
	atomic_t use_count;
};

/* driver specific structure pointed to by the device structure */
struct xpnet_dev_private {
	struct net_device_stats stats;
};

struct net_device *xpnet_device;

/*
 * When we are notified of other partitions activating, we add them to
 * our bitmask of partitions to which we broadcast.
 */
static u64 xpnet_broadcast_partitions;
/* protect above */
131
static DEFINE_SPINLOCK(xpnet_broadcast_lock);
132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226

/*
 * Since the Block Transfer Engine (BTE) is being used for the transfer
 * and it relies upon cache-line size transfers, we need to reserve at
 * least one cache-line for head and tail alignment.  The BTE is
 * limited to 8MB transfers.
 *
 * Testing has shown that changing MTU to greater than 64KB has no effect
 * on TCP as the two sides negotiate a Max Segment Size that is limited
 * to 64K.  Other protocols May use packets greater than this, but for
 * now, the default is 64KB.
 */
#define XPNET_MAX_MTU (0x800000UL - L1_CACHE_BYTES)
/* 32KB has been determined to be the ideal */
#define XPNET_DEF_MTU (0x8000UL)


/*
 * The partition id is encapsulated in the MAC address.  The following
 * define locates the octet the partid is in.
 */
#define XPNET_PARTID_OCTET	1
#define XPNET_LICENSE_OCTET	2


/*
 * Define the XPNET debug device structure that is to be used with dev_dbg(),
 * dev_err(), dev_warn(), and dev_info().
 */
struct device_driver xpnet_dbg_name = {
	.name = "xpnet"
};

struct device xpnet_dbg_subname = {
	.bus_id = {0},			/* set to "" */
	.driver = &xpnet_dbg_name
};

struct device *xpnet = &xpnet_dbg_subname;

/*
 * Packet was recevied by XPC and forwarded to us.
 */
static void
xpnet_receive(partid_t partid, int channel, struct xpnet_message *msg)
{
	struct sk_buff *skb;
	bte_result_t bret;
	struct xpnet_dev_private *priv =
		(struct xpnet_dev_private *) xpnet_device->priv;


	if (!XPNET_VALID_MSG(msg)) {
		/*
		 * Packet with a different XPC version.  Ignore.
		 */
		xpc_received(partid, channel, (void *) msg);

		priv->stats.rx_errors++;

		return;
	}
	dev_dbg(xpnet, "received 0x%lx, %d, %d, %d\n", msg->buf_pa, msg->size,
		msg->leadin_ignore, msg->tailout_ignore);


	/* reserve an extra cache line */
	skb = dev_alloc_skb(msg->size + L1_CACHE_BYTES);
	if (!skb) {
		dev_err(xpnet, "failed on dev_alloc_skb(%d)\n",
			msg->size + L1_CACHE_BYTES);

		xpc_received(partid, channel, (void *) msg);

		priv->stats.rx_errors++;

		return;
	}

	/*
	 * The allocated skb has some reserved space.
	 * In order to use bte_copy, we need to get the
	 * skb->data pointer moved forward.
	 */
	skb_reserve(skb, (L1_CACHE_BYTES - ((u64)skb->data &
					    (L1_CACHE_BYTES - 1)) +
			  msg->leadin_ignore));

	/*
	 * Update the tail pointer to indicate data actually
	 * transferred.
	 */
	skb_put(skb, (msg->size - msg->leadin_ignore - msg->tailout_ignore));

	/*
M
Matt LaPlante 已提交
227
	 * Move the data over from the other side.
228 229 230 231 232 233 234
	 */
	if ((XPNET_VERSION_MINOR(msg->version) == 1) &&
						(msg->embedded_bytes != 0)) {
		dev_dbg(xpnet, "copying embedded message. memcpy(0x%p, 0x%p, "
			"%lu)\n", skb->data, &msg->data,
			(size_t) msg->embedded_bytes);

235
		skb_copy_to_linear_data(skb, &msg->data, (size_t)msg->embedded_bytes);
236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265
	} else {
		dev_dbg(xpnet, "transferring buffer to the skb->data area;\n\t"
			"bte_copy(0x%p, 0x%p, %hu)\n", (void *)msg->buf_pa,
			(void *)__pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)),
			msg->size);

		bret = bte_copy(msg->buf_pa,
				__pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)),
				msg->size, (BTE_NOTIFY | BTE_WACQUIRE), NULL);

		if (bret != BTE_SUCCESS) {
			// >>> Need better way of cleaning skb.  Currently skb
			// >>> appears in_use and we can't just call
			// >>> dev_kfree_skb.
			dev_err(xpnet, "bte_copy(0x%p, 0x%p, 0x%hx) returned "
				"error=0x%x\n", (void *)msg->buf_pa,
				(void *)__pa((u64)skb->data &
							~(L1_CACHE_BYTES - 1)),
				msg->size, bret);

			xpc_received(partid, channel, (void *) msg);

			priv->stats.rx_errors++;

			return;
		}
	}

	dev_dbg(xpnet, "<skb->head=0x%p skb->data=0x%p skb->tail=0x%p "
		"skb->end=0x%p skb->len=%d\n", (void *) skb->head,
266
		(void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb),
267 268 269 270 271
		skb->len);

	skb->protocol = eth_type_trans(skb, xpnet_device);
	skb->ip_summed = CHECKSUM_UNNECESSARY;

272 273 274
	dev_dbg(xpnet, "passing skb to network layer\n"
		KERN_DEBUG "\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p "
		"skb->end=0x%p skb->len=%d\n",
275
		(void *)skb->head, (void *)skb->data, skb_tail_pointer(skb),
276
		skb_end_pointer(skb), skb->len);
277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346


	xpnet_device->last_rx = jiffies;
	priv->stats.rx_packets++;
	priv->stats.rx_bytes += skb->len + ETH_HLEN;

	netif_rx_ni(skb);
	xpc_received(partid, channel, (void *) msg);
}


/*
 * This is the handler which XPC calls during any sort of change in
 * state or message reception on a connection.
 */
static void
xpnet_connection_activity(enum xpc_retval reason, partid_t partid, int channel,
			  void *data, void *key)
{
	long bp;


	DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
	DBUG_ON(channel != XPC_NET_CHANNEL);

	switch(reason) {
	case xpcMsgReceived:	/* message received */
		DBUG_ON(data == NULL);

		xpnet_receive(partid, channel, (struct xpnet_message *) data);
		break;

	case xpcConnected:	/* connection completed to a partition */
		spin_lock_bh(&xpnet_broadcast_lock);
		xpnet_broadcast_partitions |= 1UL << (partid -1 );
		bp = xpnet_broadcast_partitions;
		spin_unlock_bh(&xpnet_broadcast_lock);

		netif_carrier_on(xpnet_device);

		dev_dbg(xpnet, "%s connection created to partition %d; "
			"xpnet_broadcast_partitions=0x%lx\n",
			xpnet_device->name, partid, bp);
		break;

	default:
		spin_lock_bh(&xpnet_broadcast_lock);
		xpnet_broadcast_partitions &= ~(1UL << (partid -1 ));
		bp = xpnet_broadcast_partitions;
		spin_unlock_bh(&xpnet_broadcast_lock);

		if (bp == 0) {
			netif_carrier_off(xpnet_device);
		}

		dev_dbg(xpnet, "%s disconnected from partition %d; "
			"xpnet_broadcast_partitions=0x%lx\n",
			xpnet_device->name, partid, bp);
		break;

	}
}


static int
xpnet_dev_open(struct net_device *dev)
{
	enum xpc_retval ret;


T
Tony Luck 已提交
347 348
	dev_dbg(xpnet, "calling xpc_connect(%d, 0x%p, NULL, %ld, %ld, %ld, "
		"%ld)\n", XPC_NET_CHANNEL, xpnet_connection_activity,
349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477
		XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, XPNET_MAX_KTHREADS,
		XPNET_MAX_IDLE_KTHREADS);

	ret = xpc_connect(XPC_NET_CHANNEL, xpnet_connection_activity, NULL,
			  XPNET_MSG_SIZE, XPNET_MSG_NENTRIES,
			  XPNET_MAX_KTHREADS, XPNET_MAX_IDLE_KTHREADS);
	if (ret != xpcSuccess) {
		dev_err(xpnet, "ifconfig up of %s failed on XPC connect, "
			"ret=%d\n", dev->name, ret);

		return -ENOMEM;
	}

	dev_dbg(xpnet, "ifconfig up of %s; XPC connected\n", dev->name);

	return 0;
}


static int
xpnet_dev_stop(struct net_device *dev)
{
	xpc_disconnect(XPC_NET_CHANNEL);

	dev_dbg(xpnet, "ifconfig down of %s; XPC disconnected\n", dev->name);

	return 0;
}


static int
xpnet_dev_change_mtu(struct net_device *dev, int new_mtu)
{
	/* 68 comes from min TCP+IP+MAC header */
	if ((new_mtu < 68) || (new_mtu > XPNET_MAX_MTU)) {
		dev_err(xpnet, "ifconfig %s mtu %d failed; value must be "
			"between 68 and %ld\n", dev->name, new_mtu,
			XPNET_MAX_MTU);
		return -EINVAL;
	}

	dev->mtu = new_mtu;
	dev_dbg(xpnet, "ifconfig %s mtu set to %d\n", dev->name, new_mtu);
	return 0;
}


/*
 * Required for the net_device structure.
 */
static int
xpnet_dev_set_config(struct net_device *dev, struct ifmap *new_map)
{
	return 0;
}


/*
 * Return statistics to the caller.
 */
static struct net_device_stats *
xpnet_dev_get_stats(struct net_device *dev)
{
	struct xpnet_dev_private *priv;


	priv = (struct xpnet_dev_private *) dev->priv;

	return &priv->stats;
}


/*
 * Notification that the other end has received the message and
 * DMA'd the skb information.  At this point, they are done with
 * our side.  When all recipients are done processing, we
 * release the skb and then release our pending message structure.
 */
static void
xpnet_send_completed(enum xpc_retval reason, partid_t partid, int channel,
			void *__qm)
{
	struct xpnet_pending_msg *queued_msg =
		(struct xpnet_pending_msg *) __qm;


	DBUG_ON(queued_msg == NULL);

	dev_dbg(xpnet, "message to %d notified with reason %d\n",
		partid, reason);

	if (atomic_dec_return(&queued_msg->use_count) == 0) {
		dev_dbg(xpnet, "all acks for skb->head=-x%p\n",
			(void *) queued_msg->skb->head);

		dev_kfree_skb_any(queued_msg->skb);
		kfree(queued_msg);
	}
}


/*
 * Network layer has formatted a packet (skb) and is ready to place it
 * "on the wire".  Prepare and send an xpnet_message to all partitions
 * which have connected with us and are targets of this packet.
 *
 * MAC-NOTE:  For the XPNET driver, the MAC address contains the
 * destination partition_id.  If the destination partition id word
 * is 0xff, this packet is to broadcast to all partitions.
 */
static int
xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
	struct xpnet_pending_msg *queued_msg;
	enum xpc_retval ret;
	struct xpnet_message *msg;
	u64 start_addr, end_addr;
	long dp;
	u8 second_mac_octet;
	partid_t dest_partid;
	struct xpnet_dev_private *priv;
	u16 embedded_bytes;


	priv = (struct xpnet_dev_private *) dev->priv;


	dev_dbg(xpnet, ">skb->head=0x%p skb->data=0x%p skb->tail=0x%p "
		"skb->end=0x%p skb->len=%d\n", (void *) skb->head,
478
		(void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb),
479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499
		skb->len);


	/*
	 * The xpnet_pending_msg tracks how many outstanding
	 * xpc_send_notifies are relying on this skb.  When none
	 * remain, release the skb.
	 */
	queued_msg = kmalloc(sizeof(struct xpnet_pending_msg), GFP_ATOMIC);
	if (queued_msg == NULL) {
		dev_warn(xpnet, "failed to kmalloc %ld bytes; dropping "
			"packet\n", sizeof(struct xpnet_pending_msg));

		priv->stats.tx_errors++;

		return -ENOMEM;
	}


	/* get the beginning of the first cacheline and end of last */
	start_addr = ((u64) skb->data & ~(L1_CACHE_BYTES - 1));
500
	end_addr = L1_CACHE_ALIGN((u64)skb_tail_pointer(skb));
501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534

	/* calculate how many bytes to embed in the XPC message */
	embedded_bytes = 0;
	if (unlikely(skb->len <= XPNET_MSG_DATA_MAX)) {
		/* skb->data does fit so embed */
		embedded_bytes = skb->len;
	}


	/*
	 * Since the send occurs asynchronously, we set the count to one
	 * and begin sending.  Any sends that happen to complete before
	 * we are done sending will not free the skb.  We will be left
	 * with that task during exit.  This also handles the case of
	 * a packet destined for a partition which is no longer up.
	 */
	atomic_set(&queued_msg->use_count, 1);
	queued_msg->skb = skb;


	second_mac_octet = skb->data[XPNET_PARTID_OCTET];
	if (second_mac_octet == 0xff) {
		/* we are being asked to broadcast to all partitions */
		dp = xpnet_broadcast_partitions;
	} else if (second_mac_octet != 0) {
		dp = xpnet_broadcast_partitions &
					(1UL << (second_mac_octet - 1));
	} else {
		/* 0 is an invalid partid.  Ignore */
		dp = 0;
	}
	dev_dbg(xpnet, "destination Partitions mask (dp) = 0x%lx\n", dp);

	/*
S
Simon Arlott 已提交
535
	 * If we wanted to allow promiscuous mode to work like an
536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568
	 * unswitched network, this would be a good point to OR in a
	 * mask of partitions which should be receiving all packets.
	 */

	/*
	 * Main send loop.
	 */
	for (dest_partid = 1; dp && dest_partid < XP_MAX_PARTITIONS;
	     dest_partid++) {


		if (!(dp & (1UL << (dest_partid - 1)))) {
			/* not destined for this partition */
			continue;
		}

		/* remove this partition from the destinations mask */
		dp &= ~(1UL << (dest_partid - 1));


		/* found a partition to send to */

		ret = xpc_allocate(dest_partid, XPC_NET_CHANNEL,
				   XPC_NOWAIT, (void **)&msg);
		if (unlikely(ret != xpcSuccess)) {
			continue;
		}

		msg->embedded_bytes = embedded_bytes;
		if (unlikely(embedded_bytes != 0)) {
			msg->version = XPNET_VERSION_EMBED;
			dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n",
				&msg->data, skb->data, (size_t) embedded_bytes);
569 570
			skb_copy_from_linear_data(skb, &msg->data,
						  (size_t)embedded_bytes);
571 572 573 574 575 576
		} else {
			msg->version = XPNET_VERSION;
		}
		msg->magic = XPNET_MAGIC;
		msg->size = end_addr - start_addr;
		msg->leadin_ignore = (u64) skb->data - start_addr;
577
		msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb);
578 579
		msg->buf_pa = __pa(start_addr);

580 581 582 583
		dev_dbg(xpnet, "sending XPC message to %d:%d\n"
			KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, "
			"msg->leadin_ignore=%u, msg->tailout_ignore=%u\n",
			dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size,
584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637
			msg->leadin_ignore, msg->tailout_ignore);


		atomic_inc(&queued_msg->use_count);

		ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, msg,
				      xpnet_send_completed, queued_msg);
		if (unlikely(ret != xpcSuccess)) {
			atomic_dec(&queued_msg->use_count);
			continue;
		}

	}

	if (atomic_dec_return(&queued_msg->use_count) == 0) {
		dev_dbg(xpnet, "no partitions to receive packet destined for "
			"%d\n", dest_partid);


		dev_kfree_skb(skb);
		kfree(queued_msg);
	}

	priv->stats.tx_packets++;
	priv->stats.tx_bytes += skb->len;

	return 0;
}


/*
 * Deal with transmit timeouts coming from the network layer.
 */
static void
xpnet_dev_tx_timeout (struct net_device *dev)
{
	struct xpnet_dev_private *priv;


	priv = (struct xpnet_dev_private *) dev->priv;

	priv->stats.tx_errors++;
	return;
}


static int __init
xpnet_init(void)
{
	int i;
	u32 license_num;
	int result = -ENOMEM;


638 639 640 641
	if (!ia64_platform_is("sn2")) {
		return -ENODEV;
	}

642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718
	dev_info(xpnet, "registering network device %s\n", XPNET_DEVICE_NAME);

	/*
	 * use ether_setup() to init the majority of our device
	 * structure and then override the necessary pieces.
	 */
	xpnet_device = alloc_netdev(sizeof(struct xpnet_dev_private),
				    XPNET_DEVICE_NAME, ether_setup);
	if (xpnet_device == NULL) {
		return -ENOMEM;
	}

	netif_carrier_off(xpnet_device);

	xpnet_device->mtu = XPNET_DEF_MTU;
	xpnet_device->change_mtu = xpnet_dev_change_mtu;
	xpnet_device->open = xpnet_dev_open;
	xpnet_device->get_stats = xpnet_dev_get_stats;
	xpnet_device->stop = xpnet_dev_stop;
	xpnet_device->hard_start_xmit = xpnet_dev_hard_start_xmit;
	xpnet_device->tx_timeout = xpnet_dev_tx_timeout;
	xpnet_device->set_config = xpnet_dev_set_config;

	/*
	 * Multicast assumes the LSB of the first octet is set for multicast
	 * MAC addresses.  We chose the first octet of the MAC to be unlikely
	 * to collide with any vendor's officially issued MAC.
	 */
	xpnet_device->dev_addr[0] = 0xfe;
	xpnet_device->dev_addr[XPNET_PARTID_OCTET] = sn_partition_id;
	license_num = sn_partition_serial_number_val();
	for (i = 3; i >= 0; i--) {
		xpnet_device->dev_addr[XPNET_LICENSE_OCTET + i] =
							license_num & 0xff;
		license_num = license_num >> 8;
	}

	/*
	 * ether_setup() sets this to a multicast device.  We are
	 * really not supporting multicast at this time.
	 */
	xpnet_device->flags &= ~IFF_MULTICAST;

	/*
	 * No need to checksum as it is a DMA transfer.  The BTE will
	 * report an error if the data is not retrievable and the
	 * packet will be dropped.
	 */
	xpnet_device->features = NETIF_F_NO_CSUM;

	result = register_netdev(xpnet_device);
	if (result != 0) {
		free_netdev(xpnet_device);
	}

	return result;
}
module_init(xpnet_init);


static void __exit
xpnet_exit(void)
{
	dev_info(xpnet, "unregistering network device %s\n",
		xpnet_device[0].name);

	unregister_netdev(xpnet_device);

	free_netdev(xpnet_device);
}
module_exit(xpnet_exit);


MODULE_AUTHOR("Silicon Graphics, Inc.");
MODULE_DESCRIPTION("Cross Partition Network adapter (XPNET)");
MODULE_LICENSE("GPL");