tpa6130a2.c 11.5 KB
Newer Older
P
Peter Ujfalusi 已提交
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
/*
 * ALSA SoC Texas Instruments TPA6130A2 headset stereo amplifier driver
 *
 * Copyright (C) Nokia Corporation
 *
 * Author: Peter Ujfalusi <peter.ujfalusi@nokia.com>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
 * 02110-1301 USA
 */

#include <linux/module.h>
#include <linux/errno.h>
#include <linux/device.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
28
#include <linux/regulator/consumer.h>
29
#include <linux/slab.h>
P
Peter Ujfalusi 已提交
30 31 32 33 34 35
#include <sound/tpa6130a2-plat.h>
#include <sound/soc.h>
#include <sound/tlv.h>

#include "tpa6130a2.h"

36
static struct i2c_client *tpa6130a2_client;
P
Peter Ujfalusi 已提交
37 38 39 40 41

/* This struct is used to save the context */
struct tpa6130a2_data {
	struct mutex mutex;
	unsigned char regs[TPA6130A2_CACHEREGNUM];
42
	struct regulator *supply;
P
Peter Ujfalusi 已提交
43
	int power_gpio;
44
	u8 power_state:1;
45
	enum tpa_model id;
P
Peter Ujfalusi 已提交
46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79
};

static int tpa6130a2_i2c_read(int reg)
{
	struct tpa6130a2_data *data;
	int val;

	BUG_ON(tpa6130a2_client == NULL);
	data = i2c_get_clientdata(tpa6130a2_client);

	/* If powered off, return the cached value */
	if (data->power_state) {
		val = i2c_smbus_read_byte_data(tpa6130a2_client, reg);
		if (val < 0)
			dev_err(&tpa6130a2_client->dev, "Read failed\n");
		else
			data->regs[reg] = val;
	} else {
		val = data->regs[reg];
	}

	return val;
}

static int tpa6130a2_i2c_write(int reg, u8 value)
{
	struct tpa6130a2_data *data;
	int val = 0;

	BUG_ON(tpa6130a2_client == NULL);
	data = i2c_get_clientdata(tpa6130a2_client);

	if (data->power_state) {
		val = i2c_smbus_write_byte_data(tpa6130a2_client, reg, value);
80
		if (val < 0) {
P
Peter Ujfalusi 已提交
81
			dev_err(&tpa6130a2_client->dev, "Write failed\n");
82 83
			return val;
		}
P
Peter Ujfalusi 已提交
84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101
	}

	/* Either powered on or off, we save the context */
	data->regs[reg] = value;

	return val;
}

static u8 tpa6130a2_read(int reg)
{
	struct tpa6130a2_data *data;

	BUG_ON(tpa6130a2_client == NULL);
	data = i2c_get_clientdata(tpa6130a2_client);

	return data->regs[reg];
}

102
static int tpa6130a2_initialize(void)
P
Peter Ujfalusi 已提交
103 104
{
	struct tpa6130a2_data *data;
105
	int i, ret = 0;
P
Peter Ujfalusi 已提交
106 107 108 109

	BUG_ON(tpa6130a2_client == NULL);
	data = i2c_get_clientdata(tpa6130a2_client);

110 111 112 113 114 115 116
	for (i = 1; i < TPA6130A2_REG_VERSION; i++) {
		ret = tpa6130a2_i2c_write(i, data->regs[i]);
		if (ret < 0)
			break;
	}

	return ret;
P
Peter Ujfalusi 已提交
117 118
}

119
static int tpa6130a2_power(u8 power)
P
Peter Ujfalusi 已提交
120 121 122
{
	struct	tpa6130a2_data *data;
	u8	val;
123
	int	ret = 0;
P
Peter Ujfalusi 已提交
124 125 126 127 128

	BUG_ON(tpa6130a2_client == NULL);
	data = i2c_get_clientdata(tpa6130a2_client);

	mutex_lock(&data->mutex);
129 130
	if (power == data->power_state)
		goto exit;
131

132
	if (power) {
133
		ret = regulator_enable(data->supply);
134 135
		if (ret != 0) {
			dev_err(&tpa6130a2_client->dev,
136
				"Failed to enable supply: %d\n", ret);
137
			goto exit;
P
Peter Ujfalusi 已提交
138
		}
139 140 141
		/* Power on */
		if (data->power_gpio >= 0)
			gpio_set_value(data->power_gpio, 1);
142 143

		data->power_state = 1;
144 145 146 147 148 149 150 151 152 153
		ret = tpa6130a2_initialize();
		if (ret < 0) {
			dev_err(&tpa6130a2_client->dev,
				"Failed to initialize chip\n");
			if (data->power_gpio >= 0)
				gpio_set_value(data->power_gpio, 0);
			regulator_disable(data->supply);
			data->power_state = 0;
			goto exit;
		}
154
	} else {
P
Peter Ujfalusi 已提交
155 156 157 158
		/* set SWS */
		val = tpa6130a2_read(TPA6130A2_REG_CONTROL);
		val |= TPA6130A2_SWS;
		tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val);
159

P
Peter Ujfalusi 已提交
160
		/* Power off */
161
		if (data->power_gpio >= 0)
P
Peter Ujfalusi 已提交
162
			gpio_set_value(data->power_gpio, 0);
163

164
		ret = regulator_disable(data->supply);
165 166
		if (ret != 0) {
			dev_err(&tpa6130a2_client->dev,
167
				"Failed to disable supply: %d\n", ret);
168
			goto exit;
P
Peter Ujfalusi 已提交
169
		}
170 171

		data->power_state = 0;
P
Peter Ujfalusi 已提交
172
	}
173 174

exit:
P
Peter Ujfalusi 已提交
175
	mutex_unlock(&data->mutex);
176
	return ret;
P
Peter Ujfalusi 已提交
177 178
}

179
static int tpa6130a2_get_volsw(struct snd_kcontrol *kcontrol,
P
Peter Ujfalusi 已提交
180 181 182 183 184 185 186
		struct snd_ctl_elem_value *ucontrol)
{
	struct soc_mixer_control *mc =
		(struct soc_mixer_control *)kcontrol->private_value;
	struct tpa6130a2_data *data;
	unsigned int reg = mc->reg;
	unsigned int shift = mc->shift;
187 188
	int max = mc->max;
	unsigned int mask = (1 << fls(max)) - 1;
P
Peter Ujfalusi 已提交
189 190 191 192 193 194 195 196 197 198 199 200
	unsigned int invert = mc->invert;

	BUG_ON(tpa6130a2_client == NULL);
	data = i2c_get_clientdata(tpa6130a2_client);

	mutex_lock(&data->mutex);

	ucontrol->value.integer.value[0] =
		(tpa6130a2_read(reg) >> shift) & mask;

	if (invert)
		ucontrol->value.integer.value[0] =
201
			max - ucontrol->value.integer.value[0];
P
Peter Ujfalusi 已提交
202 203 204 205 206

	mutex_unlock(&data->mutex);
	return 0;
}

207
static int tpa6130a2_put_volsw(struct snd_kcontrol *kcontrol,
P
Peter Ujfalusi 已提交
208 209 210 211 212 213 214
		struct snd_ctl_elem_value *ucontrol)
{
	struct soc_mixer_control *mc =
		(struct soc_mixer_control *)kcontrol->private_value;
	struct tpa6130a2_data *data;
	unsigned int reg = mc->reg;
	unsigned int shift = mc->shift;
215 216
	int max = mc->max;
	unsigned int mask = (1 << fls(max)) - 1;
P
Peter Ujfalusi 已提交
217 218 219 220 221 222 223 224
	unsigned int invert = mc->invert;
	unsigned int val = (ucontrol->value.integer.value[0] & mask);
	unsigned int val_reg;

	BUG_ON(tpa6130a2_client == NULL);
	data = i2c_get_clientdata(tpa6130a2_client);

	if (invert)
225
		val = max - val;
P
Peter Ujfalusi 已提交
226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264

	mutex_lock(&data->mutex);

	val_reg = tpa6130a2_read(reg);
	if (((val_reg >> shift) & mask) == val) {
		mutex_unlock(&data->mutex);
		return 0;
	}

	val_reg &= ~(mask << shift);
	val_reg |= val << shift;
	tpa6130a2_i2c_write(reg, val_reg);

	mutex_unlock(&data->mutex);

	return 1;
}

/*
 * TPA6130 volume. From -59.5 to 4 dB with increasing step size when going
 * down in gain.
 */
static const unsigned int tpa6130_tlv[] = {
	TLV_DB_RANGE_HEAD(10),
	0, 1, TLV_DB_SCALE_ITEM(-5950, 600, 0),
	2, 3, TLV_DB_SCALE_ITEM(-5000, 250, 0),
	4, 5, TLV_DB_SCALE_ITEM(-4550, 160, 0),
	6, 7, TLV_DB_SCALE_ITEM(-4140, 190, 0),
	8, 9, TLV_DB_SCALE_ITEM(-3650, 120, 0),
	10, 11, TLV_DB_SCALE_ITEM(-3330, 160, 0),
	12, 13, TLV_DB_SCALE_ITEM(-3040, 180, 0),
	14, 20, TLV_DB_SCALE_ITEM(-2710, 110, 0),
	21, 37, TLV_DB_SCALE_ITEM(-1960, 74, 0),
	38, 63, TLV_DB_SCALE_ITEM(-720, 45, 0),
};

static const struct snd_kcontrol_new tpa6130a2_controls[] = {
	SOC_SINGLE_EXT_TLV("TPA6130A2 Headphone Playback Volume",
		       TPA6130A2_REG_VOL_MUTE, 0, 0x3f, 0,
265
		       tpa6130a2_get_volsw, tpa6130a2_put_volsw,
P
Peter Ujfalusi 已提交
266 267 268
		       tpa6130_tlv),
};

269 270 271 272 273 274 275 276
static const unsigned int tpa6140_tlv[] = {
	TLV_DB_RANGE_HEAD(3),
	0, 8, TLV_DB_SCALE_ITEM(-5900, 400, 0),
	9, 16, TLV_DB_SCALE_ITEM(-2500, 200, 0),
	17, 31, TLV_DB_SCALE_ITEM(-1000, 100, 0),
};

static const struct snd_kcontrol_new tpa6140a2_controls[] = {
277 278
	SOC_SINGLE_EXT_TLV("TPA6140A2 Headphone Playback Volume",
		       TPA6130A2_REG_VOL_MUTE, 1, 0x1f, 0,
279
		       tpa6130a2_get_volsw, tpa6130a2_put_volsw,
280
		       tpa6140_tlv),
281 282
};

P
Peter Ujfalusi 已提交
283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298
/*
 * Enable or disable channel (left or right)
 * The bit number for mute and amplifier are the same per channel:
 * bit 6: Right channel
 * bit 7: Left channel
 * in both registers.
 */
static void tpa6130a2_channel_enable(u8 channel, int enable)
{
	u8	val;

	if (enable) {
		/* Enable channel */
		/* Enable amplifier */
		val = tpa6130a2_read(TPA6130A2_REG_CONTROL);
		val |= channel;
299
		val &= ~TPA6130A2_SWS;
P
Peter Ujfalusi 已提交
300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319
		tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val);

		/* Unmute channel */
		val = tpa6130a2_read(TPA6130A2_REG_VOL_MUTE);
		val &= ~channel;
		tpa6130a2_i2c_write(TPA6130A2_REG_VOL_MUTE, val);
	} else {
		/* Disable channel */
		/* Mute channel */
		val = tpa6130a2_read(TPA6130A2_REG_VOL_MUTE);
		val |= channel;
		tpa6130a2_i2c_write(TPA6130A2_REG_VOL_MUTE, val);

		/* Disable amplifier */
		val = tpa6130a2_read(TPA6130A2_REG_CONTROL);
		val &= ~channel;
		tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val);
	}
}

320
int tpa6130a2_stereo_enable(struct snd_soc_codec *codec, int enable)
P
Peter Ujfalusi 已提交
321
{
322
	int ret = 0;
323
	if (enable) {
324
		ret = tpa6130a2_power(1);
325 326 327 328 329 330 331
		if (ret < 0)
			return ret;
		tpa6130a2_channel_enable(TPA6130A2_HP_EN_R | TPA6130A2_HP_EN_L,
					 1);
	} else {
		tpa6130a2_channel_enable(TPA6130A2_HP_EN_R | TPA6130A2_HP_EN_L,
					 0);
332
		ret = tpa6130a2_power(0);
P
Peter Ujfalusi 已提交
333
	}
334

335
	return ret;
P
Peter Ujfalusi 已提交
336
}
337
EXPORT_SYMBOL_GPL(tpa6130a2_stereo_enable);
P
Peter Ujfalusi 已提交
338 339 340

int tpa6130a2_add_controls(struct snd_soc_codec *codec)
{
341 342
	struct	tpa6130a2_data *data;

343 344 345
	if (tpa6130a2_client == NULL)
		return -ENODEV;

346 347 348 349 350 351 352 353
	data = i2c_get_clientdata(tpa6130a2_client);

	if (data->id == TPA6140A2)
		return snd_soc_add_controls(codec, tpa6140a2_controls,
						ARRAY_SIZE(tpa6140a2_controls));
	else
		return snd_soc_add_controls(codec, tpa6130a2_controls,
						ARRAY_SIZE(tpa6130a2_controls));
P
Peter Ujfalusi 已提交
354 355 356
}
EXPORT_SYMBOL_GPL(tpa6130a2_add_controls);

357 358
static int __devinit tpa6130a2_probe(struct i2c_client *client,
				     const struct i2c_device_id *id)
P
Peter Ujfalusi 已提交
359 360 361 362
{
	struct device *dev;
	struct tpa6130a2_data *data;
	struct tpa6130a2_platform_data *pdata;
363 364
	const char *regulator;
	int ret;
P
Peter Ujfalusi 已提交
365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383

	dev = &client->dev;

	if (client->dev.platform_data == NULL) {
		dev_err(dev, "Platform data not set\n");
		dump_stack();
		return -ENODEV;
	}

	data = kzalloc(sizeof(*data), GFP_KERNEL);
	if (data == NULL) {
		dev_err(dev, "Can not allocate memory\n");
		return -ENOMEM;
	}

	tpa6130a2_client = client;

	i2c_set_clientdata(tpa6130a2_client, data);

384
	pdata = client->dev.platform_data;
P
Peter Ujfalusi 已提交
385
	data->power_gpio = pdata->power_gpio;
386
	data->id = pdata->id;
P
Peter Ujfalusi 已提交
387 388 389 390 391 392 393 394 395 396 397 398 399

	mutex_init(&data->mutex);

	/* Set default register values */
	data->regs[TPA6130A2_REG_CONTROL] =	TPA6130A2_SWS;
	data->regs[TPA6130A2_REG_VOL_MUTE] =	TPA6130A2_MUTE_R |
						TPA6130A2_MUTE_L;

	if (data->power_gpio >= 0) {
		ret = gpio_request(data->power_gpio, "tpa6130a2 enable");
		if (ret < 0) {
			dev_err(dev, "Failed to request power GPIO (%d)\n",
				data->power_gpio);
400
			goto err_gpio;
P
Peter Ujfalusi 已提交
401 402 403 404
		}
		gpio_direction_output(data->power_gpio, 0);
	}

405
	switch (data->id) {
406 407 408
	default:
		dev_warn(dev, "Unknown TPA model (%d). Assuming 6130A2\n",
			 pdata->id);
409
	case TPA6130A2:
410
		regulator = "Vdd";
411 412
		break;
	case TPA6140A2:
413
		regulator = "AVdd";
414 415
		break;
	}
416

417 418 419 420
	data->supply = regulator_get(dev, regulator);
	if (IS_ERR(data->supply)) {
		ret = PTR_ERR(data->supply);
		dev_err(dev, "Failed to request supply: %d\n", ret);
421 422 423 424 425 426 427
		goto err_regulator;
	}

	ret = tpa6130a2_power(1);
	if (ret != 0)
		goto err_power;

P
Peter Ujfalusi 已提交
428 429 430 431 432 433 434 435

	/* Read version */
	ret = tpa6130a2_i2c_read(TPA6130A2_REG_VERSION) &
				 TPA6130A2_VERSION_MASK;
	if ((ret != 1) && (ret != 2))
		dev_warn(dev, "UNTESTED version detected (%d)\n", ret);

	/* Disable the chip */
436 437 438
	ret = tpa6130a2_power(0);
	if (ret != 0)
		goto err_power;
P
Peter Ujfalusi 已提交
439 440

	return 0;
441 442

err_power:
443
	regulator_put(data->supply);
444 445 446 447
err_regulator:
	if (data->power_gpio >= 0)
		gpio_free(data->power_gpio);
err_gpio:
P
Peter Ujfalusi 已提交
448 449
	kfree(data);
	i2c_set_clientdata(tpa6130a2_client, NULL);
450
	tpa6130a2_client = NULL;
P
Peter Ujfalusi 已提交
451 452 453 454

	return ret;
}

455
static int __devexit tpa6130a2_remove(struct i2c_client *client)
P
Peter Ujfalusi 已提交
456 457 458 459 460 461 462
{
	struct tpa6130a2_data *data = i2c_get_clientdata(client);

	tpa6130a2_power(0);

	if (data->power_gpio >= 0)
		gpio_free(data->power_gpio);
463

464
	regulator_put(data->supply);
465

P
Peter Ujfalusi 已提交
466
	kfree(data);
467
	tpa6130a2_client = NULL;
P
Peter Ujfalusi 已提交
468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503

	return 0;
}

static const struct i2c_device_id tpa6130a2_id[] = {
	{ "tpa6130a2", 0 },
	{ }
};
MODULE_DEVICE_TABLE(i2c, tpa6130a2_id);

static struct i2c_driver tpa6130a2_i2c_driver = {
	.driver = {
		.name = "tpa6130a2",
		.owner = THIS_MODULE,
	},
	.probe = tpa6130a2_probe,
	.remove = __devexit_p(tpa6130a2_remove),
	.id_table = tpa6130a2_id,
};

static int __init tpa6130a2_init(void)
{
	return i2c_add_driver(&tpa6130a2_i2c_driver);
}

static void __exit tpa6130a2_exit(void)
{
	i2c_del_driver(&tpa6130a2_i2c_driver);
}

MODULE_AUTHOR("Peter Ujfalusi");
MODULE_DESCRIPTION("TPA6130A2 Headphone amplifier driver");
MODULE_LICENSE("GPL");

module_init(tpa6130a2_init);
module_exit(tpa6130a2_exit);