sam9g20_wm8731.c 8.4 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38
/*
 * sam9g20_wm8731  --  SoC audio for AT91SAM9G20-based
 * 			ATMEL AT91SAM9G20ek board.
 *
 *  Copyright (C) 2005 SAN People
 *  Copyright (C) 2008 Atmel
 *
 * Authors: Sedji Gaouaou <sedji.gaouaou@atmel.com>
 *
 * Based on ati_b1_wm8731.c by:
 * Frank Mandarino <fmandarino@endrelia.com>
 * Copyright 2006 Endrelia Technologies Inc.
 * Based on corgi.c by:
 * Copyright 2005 Wolfson Microelectronics PLC.
 * Copyright 2005 Openedhand Ltd.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */

#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
39
#include <linux/i2c.h>
40 41 42 43 44 45 46 47 48

#include <linux/atmel-ssc.h>

#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>

49
#include <asm/mach-types.h>
50 51 52 53 54 55 56
#include <mach/hardware.h>
#include <mach/gpio.h>

#include "../codecs/wm8731.h"
#include "atmel-pcm.h"
#include "atmel_ssc_dai.h"

57 58
#define MCLK_RATE 12000000

59 60 61 62 63 64 65
/*
 * As shipped the board does not have inputs.  However, it is relatively
 * straightforward to modify the board to hook them up so support is left
 * in the driver.
 */
#undef ENABLE_MIC_INPUT

66
static struct clk *mclk;
67 68 69 70 71 72 73 74

static int at91sam9g20ek_startup(struct snd_pcm_substream *substream)
{
	struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
	int ret;

	ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK,
75 76 77
		MCLK_RATE, SND_SOC_CLOCK_IN);
	if (ret < 0) {
		clk_disable(mclk);
78
		return ret;
79
	}
80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100

	return 0;
}

static void at91sam9g20ek_shutdown(struct snd_pcm_substream *substream)
{
	struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);

	dev_dbg(rtd->socdev->dev, "shutdown");
}

static int at91sam9g20ek_hw_params(struct snd_pcm_substream *substream,
	struct snd_pcm_hw_params *params)
{
	struct snd_soc_pcm_runtime *rtd = substream->private_data;
	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
	int ret;

	/* set codec DAI configuration */
	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
101
		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
102 103 104 105 106
	if (ret < 0)
		return ret;

	/* set cpu DAI configuration */
	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
107
		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
108 109 110 111 112 113 114 115 116 117 118 119
	if (ret < 0)
		return ret;

	return 0;
}

static struct snd_soc_ops at91sam9g20ek_ops = {
	.startup = at91sam9g20ek_startup,
	.hw_params = at91sam9g20ek_hw_params,
	.shutdown = at91sam9g20ek_shutdown,
};

120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144
static int at91sam9g20ek_set_bias_level(struct snd_soc_card *card,
					enum snd_soc_bias_level level)
{
	static int mclk_on;
	int ret = 0;

	switch (level) {
	case SND_SOC_BIAS_ON:
	case SND_SOC_BIAS_PREPARE:
		if (!mclk_on)
			ret = clk_enable(mclk);
		if (ret == 0)
			mclk_on = 1;
		break;

	case SND_SOC_BIAS_OFF:
	case SND_SOC_BIAS_STANDBY:
		if (mclk_on)
			clk_disable(mclk);
		mclk_on = 0;
		break;
	}

	return ret;
}
145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176

static const struct snd_soc_dapm_widget at91sam9g20ek_dapm_widgets[] = {
	SND_SOC_DAPM_MIC("Int Mic", NULL),
	SND_SOC_DAPM_SPK("Ext Spk", NULL),
};

static const struct snd_soc_dapm_route intercon[] = {

	/* speaker connected to LHPOUT */
	{"Ext Spk", NULL, "LHPOUT"},

	/* mic is connected to Mic Jack, with WM8731 Mic Bias */
	{"MICIN", NULL, "Mic Bias"},
	{"Mic Bias", NULL, "Int Mic"},
};

/*
 * Logic for a wm8731 as connected on a at91sam9g20ek board.
 */
static int at91sam9g20ek_wm8731_init(struct snd_soc_codec *codec)
{
	printk(KERN_DEBUG
			"at91sam9g20ek_wm8731 "
			": at91sam9g20ek_wm8731_init() called\n");

	/* Add specific widgets */
	snd_soc_dapm_new_controls(codec, at91sam9g20ek_dapm_widgets,
				  ARRAY_SIZE(at91sam9g20ek_dapm_widgets));
	/* Set up specific audio path interconnects */
	snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));

	/* not connected */
177 178
	snd_soc_dapm_nc_pin(codec, "RLINEIN");
	snd_soc_dapm_nc_pin(codec, "LLINEIN");
179

180
#ifdef ENABLE_MIC_INPUT
181
	snd_soc_dapm_enable_pin(codec, "Int Mic");
182 183 184 185 186
#else
	snd_soc_dapm_nc_pin(codec, "Int Mic");
#endif

	/* always connected */
187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202
	snd_soc_dapm_enable_pin(codec, "Ext Spk");

	snd_soc_dapm_sync(codec);

	return 0;
}

static struct snd_soc_dai_link at91sam9g20ek_dai = {
	.name = "WM8731",
	.stream_name = "WM8731 PCM",
	.cpu_dai = &atmel_ssc_dai[0],
	.codec_dai = &wm8731_dai,
	.init = at91sam9g20ek_wm8731_init,
	.ops = &at91sam9g20ek_ops,
};

203
static struct snd_soc_card snd_soc_at91sam9g20ek = {
204
	.name = "AT91SAMG20-EK",
205
	.platform = &atmel_soc_platform,
206 207
	.dai_link = &at91sam9g20ek_dai,
	.num_links = 1,
208
	.set_bias_level = at91sam9g20ek_set_bias_level,
209 210
};

211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241
/*
 * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
 * New drivers should register the wm8731 I2C device in the machine
 * setup code (under arch/arm for ARM systems).
 */
static int wm8731_i2c_register(void)
{
	struct i2c_board_info info;
	struct i2c_adapter *adapter;
	struct i2c_client *client;

	memset(&info, 0, sizeof(struct i2c_board_info));
	info.addr = 0x1b;
	strlcpy(info.type, "wm8731", I2C_NAME_SIZE);

	adapter = i2c_get_adapter(0);
	if (!adapter) {
		printk(KERN_ERR "can't get i2c adapter 0\n");
		return -ENODEV;
	}

	client = i2c_new_device(adapter, &info);
	i2c_put_adapter(adapter);
	if (!client) {
		printk(KERN_ERR "can't add i2c device at 0x%x\n",
			(unsigned int)info.addr);
		return -ENODEV;
	}

	return 0;
}
242 243

static struct snd_soc_device at91sam9g20ek_snd_devdata = {
244
	.card = &snd_soc_at91sam9g20ek,
245 246 247 248 249 250 251 252 253
	.codec_dev = &soc_codec_dev_wm8731,
};

static struct platform_device *at91sam9g20ek_snd_device;

static int __init at91sam9g20ek_init(void)
{
	struct atmel_ssc_info *ssc_p = at91sam9g20ek_dai.cpu_dai->private_data;
	struct ssc_device *ssc = NULL;
254
	struct clk *pllb;
255 256
	int ret;

257 258 259
	if (!machine_is_at91sam9g20ek())
		return -ENODEV;

260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284
	/*
	 * Codec MCLK is supplied by PCK0 - set it up.
	 */
	mclk = clk_get(NULL, "pck0");
	if (IS_ERR(mclk)) {
		printk(KERN_ERR "ASoC: Failed to get MCLK\n");
		ret = PTR_ERR(mclk);
		goto err;
	}

	pllb = clk_get(NULL, "pllb");
	if (IS_ERR(mclk)) {
		printk(KERN_ERR "ASoC: Failed to get PLLB\n");
		ret = PTR_ERR(mclk);
		goto err_mclk;
	}
	ret = clk_set_parent(mclk, pllb);
	clk_put(pllb);
	if (ret != 0) {
		printk(KERN_ERR "ASoC: Failed to set MCLK parent\n");
		goto err_mclk;
	}

	clk_set_rate(mclk, MCLK_RATE);

285 286 287 288 289
	/*
	 * Request SSC device
	 */
	ssc = ssc_request(0);
	if (IS_ERR(ssc)) {
290
		printk(KERN_ERR "ASoC: Failed to request SSC 0\n");
291 292 293 294 295 296
		ret = PTR_ERR(ssc);
		ssc = NULL;
		goto err_ssc;
	}
	ssc_p->ssc = ssc;

297 298 299 300
	ret = wm8731_i2c_register();
	if (ret != 0)
		goto err_ssc;

301 302
	at91sam9g20ek_snd_device = platform_device_alloc("soc-audio", -1);
	if (!at91sam9g20ek_snd_device) {
303
		printk(KERN_ERR "ASoC: Platform device allocation failed\n");
304 305 306 307 308 309 310 311 312
		ret = -ENOMEM;
	}

	platform_set_drvdata(at91sam9g20ek_snd_device,
			&at91sam9g20ek_snd_devdata);
	at91sam9g20ek_snd_devdata.dev = &at91sam9g20ek_snd_device->dev;

	ret = platform_device_add(at91sam9g20ek_snd_device);
	if (ret) {
313
		printk(KERN_ERR "ASoC: Platform device allocation failed\n");
314 315 316 317 318 319
		platform_device_put(at91sam9g20ek_snd_device);
	}

	return ret;

err_ssc:
320 321
	ssc_free(ssc);
	ssc_p->ssc = NULL;
322 323 324 325
err_mclk:
	clk_put(mclk);
	mclk = NULL;
err:
326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342
	return ret;
}

static void __exit at91sam9g20ek_exit(void)
{
	struct atmel_ssc_info *ssc_p = at91sam9g20ek_dai.cpu_dai->private_data;
	struct ssc_device *ssc;

	if (ssc_p != NULL) {
		ssc = ssc_p->ssc;
		if (ssc != NULL)
			ssc_free(ssc);
		ssc_p->ssc = NULL;
	}

	platform_device_unregister(at91sam9g20ek_snd_device);
	at91sam9g20ek_snd_device = NULL;
343 344
	clk_put(mclk);
	mclk = NULL;
345 346 347 348 349 350 351 352 353
}

module_init(at91sam9g20ek_init);
module_exit(at91sam9g20ek_exit);

/* Module information */
MODULE_AUTHOR("Sedji Gaouaou <sedji.gaouaou@atmel.com>");
MODULE_DESCRIPTION("ALSA SoC AT91SAM9G20EK_WM8731");
MODULE_LICENSE("GPL");