msm_hsusb_hw.h 2.7 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
/*
 * Copyright (C) 2007 Google, Inc.
 * Author: Brian Swetland <swetland@google.com>
 *
 * This software is licensed under the terms of the GNU General Public
 * License version 2, as published by the Free Software Foundation, and
 * may be copied, distributed, and modified under those terms.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 */

#ifndef __LINUX_USB_GADGET_MSM72K_UDC_H__
#define __LINUX_USB_GADGET_MSM72K_UDC_H__

19 20 21
/* USB phy selector - in TCSR address range */
#define USB2_PHY_SEL         0xfd4ab000

22 23
#define USB_AHBBURST         (MSM_USB_BASE + 0x0090)
#define USB_AHBMODE          (MSM_USB_BASE + 0x0098)
24 25
#define USB_GENCONFIG_2      (MSM_USB_BASE + 0x00a0)

26 27 28 29 30 31
#define USB_CAPLENGTH        (MSM_USB_BASE + 0x0100) /* 8 bit */

#define USB_USBCMD           (MSM_USB_BASE + 0x0140)
#define USB_PORTSC           (MSM_USB_BASE + 0x0184)
#define USB_OTGSC            (MSM_USB_BASE + 0x01A4)
#define USB_USBMODE          (MSM_USB_BASE + 0x01A8)
32
#define USB_PHY_CTRL         (MSM_USB_BASE + 0x0240)
33
#define USB_PHY_CTRL2        (MSM_USB_BASE + 0x0278)
34

35 36 37
#define GENCONFIG_2_SESS_VLD_CTRL_EN	BIT(7)
#define USBCMD_SESS_VLD_CTRL		BIT(25)

38 39 40 41
#define USBCMD_RESET   2
#define USB_USBINTR          (MSM_USB_BASE + 0x0148)

#define PORTSC_PHCD            (1 << 23) /* phy suspend mode */
42 43 44
#define PORTSC_PTS_MASK        (3 << 30)
#define PORTSC_PTS_ULPI        (2 << 30)
#define PORTSC_PTS_SERIAL      (3 << 30)
45 46 47 48 49 50 51 52 53

#define USB_ULPI_VIEWPORT    (MSM_USB_BASE + 0x0170)
#define ULPI_RUN              (1 << 30)
#define ULPI_WRITE            (1 << 29)
#define ULPI_READ             (0 << 29)
#define ULPI_ADDR(n)          (((n) & 255) << 16)
#define ULPI_DATA(n)          ((n) & 255)
#define ULPI_DATA_READ(n)     (((n) >> 8) & 255)

54 55 56 57
/* synopsys 28nm phy registers */
#define ULPI_PWR_CLK_MNG_REG	0x88
#define OTG_COMP_DISABLE	BIT(0)

58 59 60 61
#define ULPI_MISC_A			0x96
#define ULPI_MISC_A_VBUSVLDEXTSEL	BIT(1)
#define ULPI_MISC_A_VBUSVLDEXT		BIT(0)

62 63
#define ASYNC_INTR_CTRL         (1 << 29) /* Enable async interrupt */
#define ULPI_STP_CTRL           (1 << 30) /* Block communication with PHY */
64
#define PHY_RETEN               (1 << 1) /* PHY retention enable/disable */
65
#define PHY_POR_ASSERT		(1 << 0) /* USB2 28nm PHY POR ASSERT */
66

67 68 69 70 71 72 73 74 75 76
/* OTG definitions */
#define OTGSC_INTSTS_MASK	(0x7f << 16)
#define OTGSC_ID		(1 << 8)
#define OTGSC_BSV		(1 << 11)
#define OTGSC_IDIS		(1 << 16)
#define OTGSC_BSVIS		(1 << 19)
#define OTGSC_IDIE		(1 << 24)
#define OTGSC_BSVIE		(1 << 27)

#endif /* __LINUX_USB_GADGET_MSM72K_UDC_H__ */
反馈
建议
客服 返回
顶部