cx23885-cards.c

/*
 *  Driver for the Conexant CX23885 PCIe bridge
 *
 *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/init.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <media/cx25840.h>
#include <linux/firmware.h>

#include "../../../staging/altera-stapl/altera.h"
#include "cx23885.h"
#include "tuner-xc2028.h"
#include "netup-init.h"
#include "altera-ci.h"
#include "xc4000.h"
#include "xc5000.h"
#include "cx23888-ir.h"

static unsigned int enable_885_ir;
module_param(enable_885_ir, int, 0644);
MODULE_PARM_DESC(enable_885_ir,
		 "Enable integrated IR controller for supported\n"
		 "\t\t    CX2388[57] boards that are wired for it:\n"
		 "\t\t\tHVR-1250 (reported safe)\n"
		 "\t\t\tTeVii S470 (reported unsafe)\n"
		 "\t\t    This can cause an interrupt storm with some cards.\n"
		 "\t\t    Default: 0 [Disabled]");

/* ------------------------------------------------------------------ */
/* board config info                                                  */

struct cx23885_board cx23885_boards[] = {
	[CX23885_BOARD_UNKNOWN] = {
		.name		= "UNKNOWN/GENERIC",
		/* Ensure safe default for unknown boards */
		.clk_freq       = 0,
		.input          = {{
			.type   = CX23885_VMUX_COMPOSITE1,
			.vmux   = 0,
		}, {
			.type   = CX23885_VMUX_COMPOSITE2,
			.vmux   = 1,
		}, {
			.type   = CX23885_VMUX_COMPOSITE3,
			.vmux   = 2,
		}, {
			.type   = CX23885_VMUX_COMPOSITE4,
			.vmux   = 3,
		} },
	},
	[CX23885_BOARD_HAUPPAUGE_HVR1800lp] = {
		.name		= "Hauppauge WinTV-HVR1800lp",
		.portc		= CX23885_MPEG_DVB,
		.input          = {{
			.type   = CX23885_VMUX_TELEVISION,
			.vmux   = 0,
			.gpio0  = 0xff00,
		}, {
			.type   = CX23885_VMUX_DEBUG,
			.vmux   = 0,
			.gpio0  = 0xff01,
		}, {
			.type   = CX23885_VMUX_COMPOSITE1,
			.vmux   = 1,
			.gpio0  = 0xff02,
		}, {
			.type   = CX23885_VMUX_SVIDEO,
			.vmux   = 2,
			.gpio0  = 0xff02,
		} },
	},
	[CX23885_BOARD_HAUPPAUGE_HVR1800] = {
		.name		= "Hauppauge WinTV-HVR1800",
		.porta		= CX23885_ANALOG_VIDEO,
		.portb		= CX23885_MPEG_ENCODER,
		.portc		= CX23885_MPEG_DVB,
		.tuner_type	= TUNER_PHILIPS_TDA8290,
		.tuner_addr	= 0x42, /* 0x84 >> 1 */
		.tuner_bus	= 1,
		.input          = {{
			.type   = CX23885_VMUX_TELEVISION,
			.vmux   =	CX25840_VIN7_CH3 |
					CX25840_VIN5_CH2 |
					CX25840_VIN2_CH1,
			.gpio0  = 0,
		}, {
			.type   = CX23885_VMUX_COMPOSITE1,
			.vmux   =	CX25840_VIN7_CH3 |
					CX25840_VIN4_CH2 |
					CX25840_VIN6_CH1,
			.gpio0  = 0,
		}, {
			.type   = CX23885_VMUX_SVIDEO,
			.vmux   =	CX25840_VIN7_CH3 |
					CX25840_VIN4_CH2 |
					CX25840_VIN8_CH1 |
					CX25840_SVIDEO_ON,
			.gpio0  = 0,
		} },
	},
	[CX23885_BOARD_HAUPPAUGE_HVR1250] = {
		.name		= "Hauppauge WinTV-HVR1250",
		.portc		= CX23885_MPEG_DVB,
		.input          = {{
			.type   = CX23885_VMUX_TELEVISION,
			.vmux   = 0,
			.gpio0  = 0xff00,
		}, {
			.type   = CX23885_VMUX_DEBUG,
			.vmux   = 0,
			.gpio0  = 0xff01,
		}, {
			.type   = CX23885_VMUX_COMPOSITE1,
			.vmux   = 1,
			.gpio0  = 0xff02,
		}, {
			.type   = CX23885_VMUX_SVIDEO,
			.vmux   = 2,
			.gpio0  = 0xff02,
		} },
	},
	[CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP] = {
		.name		= "DViCO FusionHDTV5 Express",
		.portb		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_HAUPPAUGE_HVR1500Q] = {
		.name		= "Hauppauge WinTV-HVR1500Q",
		.portc		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_HAUPPAUGE_HVR1500] = {
		.name		= "Hauppauge WinTV-HVR1500",
		.portc		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_HAUPPAUGE_HVR1200] = {
		.name		= "Hauppauge WinTV-HVR1200",
		.portc		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_HAUPPAUGE_HVR1700] = {
		.name		= "Hauppauge WinTV-HVR1700",
		.portc		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_HAUPPAUGE_HVR1400] = {
		.name		= "Hauppauge WinTV-HVR1400",
		.portc		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP] = {
		.name		= "DViCO FusionHDTV7 Dual Express",
		.portb		= CX23885_MPEG_DVB,
		.portc		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP] = {
		.name		= "DViCO FusionHDTV DVB-T Dual Express",
		.portb		= CX23885_MPEG_DVB,
		.portc		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H] = {
		.name		= "Leadtek Winfast PxDVR3200 H",
		.portc		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000] = {
		.name		= "Leadtek Winfast PxDVR3200 H XC4000",
		.porta		= CX23885_ANALOG_VIDEO,
		.portc		= CX23885_MPEG_DVB,
		.tuner_type	= TUNER_XC4000,
		.tuner_addr	= 0x61,
		.radio_type	= TUNER_XC4000,
		.radio_addr	= 0x61,
		.input		= {{
			.type	= CX23885_VMUX_TELEVISION,
			.vmux	= CX25840_VIN2_CH1 |
				  CX25840_VIN5_CH2 |
				  CX25840_NONE0_CH3,
		}, {
			.type	= CX23885_VMUX_COMPOSITE1,
			.vmux	= CX25840_COMPOSITE1,
		}, {
			.type	= CX23885_VMUX_SVIDEO,
			.vmux	= CX25840_SVIDEO_LUMA3 |
				  CX25840_SVIDEO_CHROMA4,
		}, {
			.type	= CX23885_VMUX_COMPONENT,
			.vmux	= CX25840_VIN7_CH1 |
				  CX25840_VIN6_CH2 |
				  CX25840_VIN8_CH3 |
				  CX25840_COMPONENT_ON,
		} },
	},
	[CX23885_BOARD_COMPRO_VIDEOMATE_E650F] = {
		.name		= "Compro VideoMate E650F",
		.portc		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_TBS_6920] = {
		.name		= "TurboSight TBS 6920",
		.portb		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_TEVII_S470] = {
		.name		= "TeVii S470",
		.portb		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_DVBWORLD_2005] = {
		.name		= "DVBWorld DVB-S2 2005",
		.portb		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_NETUP_DUAL_DVBS2_CI] = {
		.ci_type	= 1,
		.name		= "NetUP Dual DVB-S2 CI",
		.portb		= CX23885_MPEG_DVB,
		.portc		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_HAUPPAUGE_HVR1270] = {
		.name		= "Hauppauge WinTV-HVR1270",
		.portc		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_HAUPPAUGE_HVR1275] = {
		.name		= "Hauppauge WinTV-HVR1275",
		.portc		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_HAUPPAUGE_HVR1255] = {
		.name		= "Hauppauge WinTV-HVR1255",
		.portc		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_HAUPPAUGE_HVR1210] = {
		.name		= "Hauppauge WinTV-HVR1210",
		.portc		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_MYGICA_X8506] = {
		.name		= "Mygica X8506 DMB-TH",
		.tuner_type = TUNER_XC5000,
		.tuner_addr = 0x61,
		.tuner_bus	= 1,
		.porta		= CX23885_ANALOG_VIDEO,
		.portb		= CX23885_MPEG_DVB,
		.input		= {
			{
				.type   = CX23885_VMUX_TELEVISION,
				.vmux   = CX25840_COMPOSITE2,
			},
			{
				.type   = CX23885_VMUX_COMPOSITE1,
				.vmux   = CX25840_COMPOSITE8,
			},
			{
				.type   = CX23885_VMUX_SVIDEO,
				.vmux   = CX25840_SVIDEO_LUMA3 |
						CX25840_SVIDEO_CHROMA4,
			},
			{
				.type   = CX23885_VMUX_COMPONENT,
				.vmux   = CX25840_COMPONENT_ON |
					CX25840_VIN1_CH1 |
					CX25840_VIN6_CH2 |
					CX25840_VIN7_CH3,
			},
		},
	},
	[CX23885_BOARD_MAGICPRO_PROHDTVE2] = {
		.name		= "Magic-Pro ProHDTV Extreme 2",
		.tuner_type = TUNER_XC5000,
		.tuner_addr = 0x61,
		.tuner_bus	= 1,
		.porta		= CX23885_ANALOG_VIDEO,
		.portb		= CX23885_MPEG_DVB,
		.input		= {
			{
				.type   = CX23885_VMUX_TELEVISION,
				.vmux   = CX25840_COMPOSITE2,
			},
			{
				.type   = CX23885_VMUX_COMPOSITE1,
				.vmux   = CX25840_COMPOSITE8,
			},
			{
				.type   = CX23885_VMUX_SVIDEO,
				.vmux   = CX25840_SVIDEO_LUMA3 |
						CX25840_SVIDEO_CHROMA4,
			},
			{
				.type   = CX23885_VMUX_COMPONENT,
				.vmux   = CX25840_COMPONENT_ON |
					CX25840_VIN1_CH1 |
					CX25840_VIN6_CH2 |
					CX25840_VIN7_CH3,
			},
		},
	},
	[CX23885_BOARD_HAUPPAUGE_HVR1850] = {
		.name		= "Hauppauge WinTV-HVR1850",
		.portb		= CX23885_MPEG_ENCODER,
		.portc		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_COMPRO_VIDEOMATE_E800] = {
		.name		= "Compro VideoMate E800",
		.portc		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_HAUPPAUGE_HVR1290] = {
		.name		= "Hauppauge WinTV-HVR1290",
		.portc		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_MYGICA_X8558PRO] = {
		.name		= "Mygica X8558 PRO DMB-TH",
		.portb		= CX23885_MPEG_DVB,
		.portc		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_LEADTEK_WINFAST_PXTV1200] = {
		.name           = "LEADTEK WinFast PxTV1200",
		.porta          = CX23885_ANALOG_VIDEO,
		.tuner_type     = TUNER_XC2028,
		.tuner_addr     = 0x61,
		.tuner_bus	= 1,
		.input          = {{
			.type   = CX23885_VMUX_TELEVISION,
			.vmux   = CX25840_VIN2_CH1 |
				  CX25840_VIN5_CH2 |
				  CX25840_NONE0_CH3,
		}, {
			.type   = CX23885_VMUX_COMPOSITE1,
			.vmux   = CX25840_COMPOSITE1,
		}, {
			.type   = CX23885_VMUX_SVIDEO,
			.vmux   = CX25840_SVIDEO_LUMA3 |
				  CX25840_SVIDEO_CHROMA4,
		}, {
			.type   = CX23885_VMUX_COMPONENT,
			.vmux   = CX25840_VIN7_CH1 |
				  CX25840_VIN6_CH2 |
				  CX25840_VIN8_CH3 |
				  CX25840_COMPONENT_ON,
		} },
	},
	[CX23885_BOARD_GOTVIEW_X5_3D_HYBRID] = {
		.name		= "GoTView X5 3D Hybrid",
		.tuner_type	= TUNER_XC5000,
		.tuner_addr	= 0x64,
		.tuner_bus	= 1,
		.porta		= CX23885_ANALOG_VIDEO,
		.portb		= CX23885_MPEG_DVB,
		.input          = {{
			.type   = CX23885_VMUX_TELEVISION,
			.vmux   = CX25840_VIN2_CH1 |
				  CX25840_VIN5_CH2,
			.gpio0	= 0x02,
		}, {
			.type   = CX23885_VMUX_COMPOSITE1,
			.vmux   = CX23885_VMUX_COMPOSITE1,
		}, {
			.type   = CX23885_VMUX_SVIDEO,
			.vmux   = CX25840_SVIDEO_LUMA3 |
				  CX25840_SVIDEO_CHROMA4,
		} },
	},
	[CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF] = {
		.ci_type	= 2,
		.name		= "NetUP Dual DVB-T/C-CI RF",
		.porta		= CX23885_ANALOG_VIDEO,
		.portb		= CX23885_MPEG_DVB,
		.portc		= CX23885_MPEG_DVB,
		.num_fds_portb	= 2,
		.num_fds_portc	= 2,
		.tuner_type	= TUNER_XC5000,
		.tuner_addr	= 0x64,
		.input          = { {
				.type   = CX23885_VMUX_TELEVISION,
				.vmux   = CX25840_COMPOSITE1,
		} },
	},
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);

/* ------------------------------------------------------------------ */
/* PCI subsystem IDs                                                  */

struct cx23885_subid cx23885_subids[] = {
	{
		.subvendor = 0x0070,
		.subdevice = 0x3400,
		.card      = CX23885_BOARD_UNKNOWN,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x7600,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1800lp,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x7800,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1800,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x7801,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1800,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x7809,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1800,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x7911,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1250,
	}, {
		.subvendor = 0x18ac,
		.subdevice = 0xd500,
		.card      = CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x7790,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1500Q,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x7797,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1500Q,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x7710,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1500,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x7717,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1500,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x71d1,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1200,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x71d3,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1200,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x8101,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1700,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x8010,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1400,
	}, {
		.subvendor = 0x18ac,
		.subdevice = 0xd618,
		.card      = CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP,
	}, {
		.subvendor = 0x18ac,
		.subdevice = 0xdb78,
		.card      = CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP,
	}, {
		.subvendor = 0x107d,
		.subdevice = 0x6681,
		.card      = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H,
	}, {
		.subvendor = 0x107d,
		.subdevice = 0x6f39,
		.card	   = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000,
	}, {
		.subvendor = 0x185b,
		.subdevice = 0xe800,
		.card      = CX23885_BOARD_COMPRO_VIDEOMATE_E650F,
	}, {
		.subvendor = 0x6920,
		.subdevice = 0x8888,
		.card      = CX23885_BOARD_TBS_6920,
	}, {
		.subvendor = 0xd470,
		.subdevice = 0x9022,
		.card      = CX23885_BOARD_TEVII_S470,
	}, {
		.subvendor = 0x0001,
		.subdevice = 0x2005,
		.card      = CX23885_BOARD_DVBWORLD_2005,
	}, {
		.subvendor = 0x1b55,
		.subdevice = 0x2a2c,
		.card      = CX23885_BOARD_NETUP_DUAL_DVBS2_CI,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x2211,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1270,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x2215,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1275,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x221d,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1275,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x2251,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1255,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x2259,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1255,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x2291,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x2295,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x2299,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x229d,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x22f0,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x22f1,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1255,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x22f2,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1275,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x22f3,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x22f4,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x22f5,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */
	}, {
		.subvendor = 0x14f1,
		.subdevice = 0x8651,
		.card      = CX23885_BOARD_MYGICA_X8506,
	}, {
		.subvendor = 0x14f1,
		.subdevice = 0x8657,
		.card      = CX23885_BOARD_MAGICPRO_PROHDTVE2,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x8541,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1850,
	}, {
		.subvendor = 0x1858,
		.subdevice = 0xe800,
		.card      = CX23885_BOARD_COMPRO_VIDEOMATE_E800,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x8551,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1290,
	}, {
		.subvendor = 0x14f1,
		.subdevice = 0x8578,
		.card      = CX23885_BOARD_MYGICA_X8558PRO,
	}, {
		.subvendor = 0x107d,
		.subdevice = 0x6f22,
		.card      = CX23885_BOARD_LEADTEK_WINFAST_PXTV1200,
	}, {
		.subvendor = 0x5654,
		.subdevice = 0x2390,
		.card      = CX23885_BOARD_GOTVIEW_X5_3D_HYBRID,
	}, {
		.subvendor = 0x1b55,
		.subdevice = 0xe2e4,
		.card      = CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF,
	},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);

void cx23885_card_list(struct cx23885_dev *dev)
{
	int i;

	if (0 == dev->pci->subsystem_vendor &&
	    0 == dev->pci->subsystem_device) {
		printk(KERN_INFO
			"%s: Board has no valid PCIe Subsystem ID and can't\n"
		       "%s: be autodetected. Pass card=<n> insmod option\n"
		       "%s: to workaround that. Redirect complaints to the\n"
		       "%s: vendor of the TV card.  Best regards,\n"
		       "%s:         -- tux\n",
		       dev->name, dev->name, dev->name, dev->name, dev->name);
	} else {
		printk(KERN_INFO
			"%s: Your board isn't known (yet) to the driver.\n"
		       "%s: Try to pick one of the existing card configs via\n"
		       "%s: card=<n> insmod option.  Updating to the latest\n"
		       "%s: version might help as well.\n",
		       dev->name, dev->name, dev->name, dev->name);
	}
	printk(KERN_INFO "%s: Here is a list of valid choices for the card=<n> insmod option:\n",
	       dev->name);
	for (i = 0; i < cx23885_bcount; i++)
		printk(KERN_INFO "%s:    card=%d -> %s\n",
		       dev->name, i, cx23885_boards[i].name);
}

static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
{
	struct tveeprom tv;

	tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv,
		eeprom_data);

	/* Make sure we support the board model */
	switch (tv.model) {
	case 22001:
		/* WinTV-HVR1270 (PCIe, Retail, half height)
		 * ATSC/QAM and basic analog, IR Blast */
	case 22009:
		/* WinTV-HVR1210 (PCIe, Retail, half height)
		 * DVB-T and basic analog, IR Blast */
	case 22011:
		/* WinTV-HVR1270 (PCIe, Retail, half height)
		 * ATSC/QAM and basic analog, IR Recv */
	case 22019:
		/* WinTV-HVR1210 (PCIe, Retail, half height)
		 * DVB-T and basic analog, IR Recv */
	case 22021:
		/* WinTV-HVR1275 (PCIe, Retail, half height)
		 * ATSC/QAM and basic analog, IR Recv */
	case 22029:
		/* WinTV-HVR1210 (PCIe, Retail, half height)
		 * DVB-T and basic analog, IR Recv */
	case 22101:
		/* WinTV-HVR1270 (PCIe, Retail, full height)
		 * ATSC/QAM and basic analog, IR Blast */
	case 22109:
		/* WinTV-HVR1210 (PCIe, Retail, full height)
		 * DVB-T and basic analog, IR Blast */
	case 22111:
		/* WinTV-HVR1270 (PCIe, Retail, full height)
		 * ATSC/QAM and basic analog, IR Recv */
	case 22119:
		/* WinTV-HVR1210 (PCIe, Retail, full height)
		 * DVB-T and basic analog, IR Recv */
	case 22121:
		/* WinTV-HVR1275 (PCIe, Retail, full height)
		 * ATSC/QAM and basic analog, IR Recv */
	case 22129:
		/* WinTV-HVR1210 (PCIe, Retail, full height)
		 * DVB-T and basic analog, IR Recv */
	case 71009:
		/* WinTV-HVR1200 (PCIe, Retail, full height)
		 * DVB-T and basic analog */
	case 71359:
		/* WinTV-HVR1200 (PCIe, OEM, half height)
		 * DVB-T and basic analog */
	case 71439:
		/* WinTV-HVR1200 (PCIe, OEM, half height)
		 * DVB-T and basic analog */
	case 71449:
		/* WinTV-HVR1200 (PCIe, OEM, full height)
		 * DVB-T and basic analog */
	case 71939:
		/* WinTV-HVR1200 (PCIe, OEM, half height)
		 * DVB-T and basic analog */
	case 71949:
		/* WinTV-HVR1200 (PCIe, OEM, full height)
		 * DVB-T and basic analog */
	case 71959:
		/* WinTV-HVR1200 (PCIe, OEM, full height)
		 * DVB-T and basic analog */
	case 71979:
		/* WinTV-HVR1200 (PCIe, OEM, half height)
		 * DVB-T and basic analog */
	case 71999:
		/* WinTV-HVR1200 (PCIe, OEM, full height)
		 * DVB-T and basic analog */
	case 76601:
		/* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual
			channel ATSC and MPEG2 HW Encoder */
	case 77001:
		/* WinTV-HVR1500 (Express Card, OEM, No IR, ATSC
			and Basic analog */
	case 77011:
		/* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC
			and Basic analog */
	case 77041:
		/* WinTV-HVR1500Q (Express Card, OEM, No IR, ATSC/QAM
			and Basic analog */
	case 77051:
		/* WinTV-HVR1500Q (Express Card, Retail, No IR, ATSC/QAM
			and Basic analog */
	case 78011:
		/* WinTV-HVR1800 (PCIe, Retail, 3.5mm in, IR, No FM,
			Dual channel ATSC and MPEG2 HW Encoder */
	case 78501:
		/* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM,
			Dual channel ATSC and MPEG2 HW Encoder */
	case 78521:
		/* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM,
			Dual channel ATSC and MPEG2 HW Encoder */
	case 78531:
		/* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, No FM,
			Dual channel ATSC and MPEG2 HW Encoder */
	case 78631:
		/* WinTV-HVR1800 (PCIe, OEM, No IR, No FM,
			Dual channel ATSC and MPEG2 HW Encoder */
	case 79001:
		/* WinTV-HVR1250 (PCIe, Retail, IR, full height,
			ATSC and Basic analog */
	case 79101:
		/* WinTV-HVR1250 (PCIe, Retail, IR, half height,
			ATSC and Basic analog */
	case 79501:
		/* WinTV-HVR1250 (PCIe, No IR, half height,
			ATSC [at least] and Basic analog) */
	case 79561:
		/* WinTV-HVR1250 (PCIe, OEM, No IR, half height,
			ATSC and Basic analog */
	case 79571:
		/* WinTV-HVR1250 (PCIe, OEM, No IR, full height,
		 ATSC and Basic analog */
	case 79671:
		/* WinTV-HVR1250 (PCIe, OEM, No IR, half height,
			ATSC and Basic analog */
	case 80019:
		/* WinTV-HVR1400 (Express Card, Retail, IR,
		 * DVB-T and Basic analog */
	case 81509:
		/* WinTV-HVR1700 (PCIe, OEM, No IR, half height)
		 * DVB-T and MPEG2 HW Encoder */
	case 81519:
		/* WinTV-HVR1700 (PCIe, OEM, No IR, full height)
		 * DVB-T and MPEG2 HW Encoder */
		break;
	case 85021:
		/* WinTV-HVR1850 (PCIe, Retail, 3.5mm in, IR, FM,
			Dual channel ATSC and MPEG2 HW Encoder */
		break;
	case 85721:
		/* WinTV-HVR1290 (PCIe, OEM, RCA in, IR,
			Dual channel ATSC and Basic analog */
		break;
	default:
		printk(KERN_WARNING "%s: warning: "
			"unknown hauppauge model #%d\n",
			dev->name, tv.model);
		break;
	}

	printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n",
			dev->name, tv.model);
}

int cx23885_tuner_callback(void *priv, int component, int command, int arg)
{
	struct cx23885_tsport *port = priv;
	struct cx23885_dev *dev = port->dev;
	u32 bitmask = 0;

	if (command == XC2028_RESET_CLK)
		return 0;

	if (command != 0) {
		printk(KERN_ERR "%s(): Unknown command 0x%x.\n",
			__func__, command);
		return -EINVAL;
	}

	switch (dev->board) {
	case CX23885_BOARD_HAUPPAUGE_HVR1400:
	case CX23885_BOARD_HAUPPAUGE_HVR1500:
	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
	case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
		/* Tuner Reset Command */
		bitmask = 0x04;
		break;
	case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
		/* Two identical tuners on two different i2c buses,
		 * we need to reset the correct gpio. */
		if (port->nr == 1)
			bitmask = 0x01;
		else if (port->nr == 2)
			bitmask = 0x04;
		break;
	case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
		/* Tuner Reset Command */
		bitmask = 0x02;
		break;
	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
		altera_ci_tuner_reset(dev, port->nr);
		break;
	}

	if (bitmask) {
		/* Drive the tuner into reset and back out */
		cx_clear(GP0_IO, bitmask);
		mdelay(200);
		cx_set(GP0_IO, bitmask);
	}

	return 0;
}

void cx23885_gpio_setup(struct cx23885_dev *dev)
{
	switch (dev->board) {
	case CX23885_BOARD_HAUPPAUGE_HVR1250:
		/* GPIO-0 cx24227 demodulator reset */
		cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */
		break;
	case CX23885_BOARD_HAUPPAUGE_HVR1500:
		/* GPIO-0 cx24227 demodulator */
		/* GPIO-2 xc3028 tuner */

		/* Put the parts into reset */
		cx_set(GP0_IO, 0x00050000);
		cx_clear(GP0_IO, 0x00000005);
		msleep(5);

		/* Bring the parts out of reset */
		cx_set(GP0_IO, 0x00050005);
		break;
	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
		/* GPIO-0 cx24227 demodulator reset */
		/* GPIO-2 xc5000 tuner reset */
		cx_set(GP0_IO, 0x00050005); /* Bring the part out of reset */
		break;
	case CX23885_BOARD_HAUPPAUGE_HVR1800:
		/* GPIO-0 656_CLK */
		/* GPIO-1 656_D0 */
		/* GPIO-2 8295A Reset */
		/* GPIO-3-10 cx23417 data0-7 */
		/* GPIO-11-14 cx23417 addr0-3 */
		/* GPIO-15-18 cx23417 READY, CS, RD, WR */
		/* GPIO-19 IR_RX */

		/* CX23417 GPIO's */
		/* EIO15 Zilog Reset */
		/* EIO14 S5H1409/CX24227 Reset */
		mc417_gpio_enable(dev, GPIO_15 | GPIO_14, 1);

		/* Put the demod into reset and protect the eeprom */
		mc417_gpio_clear(dev, GPIO_15 | GPIO_14);
		mdelay(100);

		/* Bring the demod and blaster out of reset */
		mc417_gpio_set(dev, GPIO_15 | GPIO_14);
		mdelay(100);

		/* Force the TDA8295A into reset and back */
		cx23885_gpio_enable(dev, GPIO_2, 1);
		cx23885_gpio_set(dev, GPIO_2);
		mdelay(20);
		cx23885_gpio_clear(dev, GPIO_2);
		mdelay(20);
		cx23885_gpio_set(dev, GPIO_2);
		mdelay(20);
		break;
	case CX23885_BOARD_HAUPPAUGE_HVR1200:
		/* GPIO-0 tda10048 demodulator reset */
		/* GPIO-2 tda18271 tuner reset */

		/* Put the parts into reset and back */
		cx_set(GP0_IO, 0x00050000);
		mdelay(20);
		cx_clear(GP0_IO, 0x00000005);
		mdelay(20);
		cx_set(GP0_IO, 0x00050005);
		break;
	case CX23885_BOARD_HAUPPAUGE_HVR1700:
		/* GPIO-0 TDA10048 demodulator reset */
		/* GPIO-2 TDA8295A Reset */
		/* GPIO-3-10 cx23417 data0-7 */
		/* GPIO-11-14 cx23417 addr0-3 */
		/* GPIO-15-18 cx23417 READY, CS, RD, WR */

		/* The following GPIO's are on the interna AVCore (cx25840) */
		/* GPIO-19 IR_RX */
		/* GPIO-20 IR_TX 416/DVBT Select */
		/* GPIO-21 IIS DAT */
		/* GPIO-22 IIS WCLK */
		/* GPIO-23 IIS BCLK */

		/* Put the parts into reset and back */
		cx_set(GP0_IO, 0x00050000);
		mdelay(20);
		cx_clear(GP0_IO, 0x00000005);
		mdelay(20);
		cx_set(GP0_IO, 0x00050005);
		break;
	case CX23885_BOARD_HAUPPAUGE_HVR1400:
		/* GPIO-0  Dibcom7000p demodulator reset */
		/* GPIO-2  xc3028L tuner reset */
		/* GPIO-13 LED */

		/* Put the parts into reset and back */
		cx_set(GP0_IO, 0x00050000);
		mdelay(20);
		cx_clear(GP0_IO, 0x00000005);
		mdelay(20);
		cx_set(GP0_IO, 0x00050005);
		break;
	case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
		/* GPIO-0 xc5000 tuner reset i2c bus 0 */
		/* GPIO-1 s5h1409 demod reset i2c bus 0 */
		/* GPIO-2 xc5000 tuner reset i2c bus 1 */
		/* GPIO-3 s5h1409 demod reset i2c bus 0 */

		/* Put the parts into reset and back */
		cx_set(GP0_IO, 0x000f0000);
		mdelay(20);
		cx_clear(GP0_IO, 0x0000000f);
		mdelay(20);
		cx_set(GP0_IO, 0x000f000f);
		break;
	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
		/* GPIO-0 portb xc3028 reset */
		/* GPIO-1 portb zl10353 reset */
		/* GPIO-2 portc xc3028 reset */
		/* GPIO-3 portc zl10353 reset */

		/* Put the parts into reset and back */
		cx_set(GP0_IO, 0x000f0000);
		mdelay(20);
		cx_clear(GP0_IO, 0x0000000f);
		mdelay(20);
		cx_set(GP0_IO, 0x000f000f);
		break;
	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
	case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
		/* GPIO-2  xc3028 tuner reset */

		/* The following GPIO's are on the internal AVCore (cx25840) */
		/* GPIO-?  zl10353 demod reset */

		/* Put the parts into reset and back */
		cx_set(GP0_IO, 0x00040000);
		mdelay(20);
		cx_clear(GP0_IO, 0x00000004);
		mdelay(20);
		cx_set(GP0_IO, 0x00040004);
		break;
	case CX23885_BOARD_TBS_6920:
		cx_write(MC417_CTL, 0x00000036);
		cx_write(MC417_OEN, 0x00001000);
		cx_set(MC417_RWD, 0x00000002);
		mdelay(200);
		cx_clear(MC417_RWD, 0x00000800);
		mdelay(200);
		cx_set(MC417_RWD, 0x00000800);
		mdelay(200);
		break;
	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
		/* GPIO-0 INTA from CiMax1
		   GPIO-1 INTB from CiMax2
		   GPIO-2 reset chips
		   GPIO-3 to GPIO-10 data/addr for CA
		   GPIO-11 ~CS0 to CiMax1
		   GPIO-12 ~CS1 to CiMax2
		   GPIO-13 ADL0 load LSB addr
		   GPIO-14 ADL1 load MSB addr
		   GPIO-15 ~RDY from CiMax
		   GPIO-17 ~RD to CiMax
		   GPIO-18 ~WR to CiMax
		 */
		cx_set(GP0_IO, 0x00040000); /* GPIO as out */
		/* GPIO1 and GPIO2 as INTA and INTB from CiMaxes, reset low */
		cx_clear(GP0_IO, 0x00030004);
		mdelay(100);/* reset delay */
		cx_set(GP0_IO, 0x00040004); /* GPIO as out, reset high */
		cx_write(MC417_CTL, 0x00000037);/* enable GPIO3-18 pins */
		/* GPIO-15 IN as ~ACK, rest as OUT */
		cx_write(MC417_OEN, 0x00001000);
		/* ~RD, ~WR high; ADL0, ADL1 low; ~CS0, ~CS1 high */
		cx_write(MC417_RWD, 0x0000c300);
		/* enable irq */
		cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/
		break;
	case CX23885_BOARD_HAUPPAUGE_HVR1270:
	case CX23885_BOARD_HAUPPAUGE_HVR1275:
	case CX23885_BOARD_HAUPPAUGE_HVR1255:
	case CX23885_BOARD_HAUPPAUGE_HVR1210:
		/* GPIO-5 RF Control: 0 = RF1 Terrestrial, 1 = RF2 Cable */
		/* GPIO-6 I2C Gate which can isolate the demod from the bus */
		/* GPIO-9 Demod reset */

		/* Put the parts into reset and back */
		cx23885_gpio_enable(dev, GPIO_9 | GPIO_6 | GPIO_5, 1);
		cx23885_gpio_set(dev, GPIO_9 | GPIO_6 | GPIO_5);
		cx23885_gpio_clear(dev, GPIO_9);
		mdelay(20);
		cx23885_gpio_set(dev, GPIO_9);
		break;
	case CX23885_BOARD_MYGICA_X8506:
	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
		/* GPIO-0 (0)Analog / (1)Digital TV */
		/* GPIO-1 reset XC5000 */
		/* GPIO-2 reset LGS8GL5 / LGS8G75 */
		cx23885_gpio_enable(dev, GPIO_0 | GPIO_1 | GPIO_2, 1);
		cx23885_gpio_clear(dev, GPIO_1 | GPIO_2);
		mdelay(100);
		cx23885_gpio_set(dev, GPIO_0 | GPIO_1 | GPIO_2);
		mdelay(100);
		break;
	case CX23885_BOARD_MYGICA_X8558PRO:
		/* GPIO-0 reset first ATBM8830 */
		/* GPIO-1 reset second ATBM8830 */
		cx23885_gpio_enable(dev, GPIO_0 | GPIO_1, 1);
		cx23885_gpio_clear(dev, GPIO_0 | GPIO_1);
		mdelay(100);
		cx23885_gpio_set(dev, GPIO_0 | GPIO_1);
		mdelay(100);
		break;
	case CX23885_BOARD_HAUPPAUGE_HVR1850:
	case CX23885_BOARD_HAUPPAUGE_HVR1290:
		/* GPIO-0 656_CLK */
		/* GPIO-1 656_D0 */
		/* GPIO-2 Wake# */
		/* GPIO-3-10 cx23417 data0-7 */
		/* GPIO-11-14 cx23417 addr0-3 */
		/* GPIO-15-18 cx23417 READY, CS, RD, WR */
		/* GPIO-19 IR_RX */
		/* GPIO-20 C_IR_TX */
		/* GPIO-21 I2S DAT */
		/* GPIO-22 I2S WCLK */
		/* GPIO-23 I2S BCLK */
		/* ALT GPIO: EXP GPIO LATCH */

		/* CX23417 GPIO's */
		/* GPIO-14 S5H1411/CX24228 Reset */
		/* GPIO-13 EEPROM write protect */
		mc417_gpio_enable(dev, GPIO_14 | GPIO_13, 1);

		/* Put the demod into reset and protect the eeprom */
		mc417_gpio_clear(dev, GPIO_14 | GPIO_13);
		mdelay(100);

		/* Bring the demod out of reset */
		mc417_gpio_set(dev, GPIO_14);
		mdelay(100);

		/* CX24228 GPIO */
		/* Connected to IF / Mux */
		break;
	case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
		cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */
		break;
	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
		/* GPIO-0 ~INT in
		   GPIO-1 TMS out
		   GPIO-2 ~reset chips out
		   GPIO-3 to GPIO-10 data/addr for CA in/out
		   GPIO-11 ~CS out
		   GPIO-12 ADDR out
		   GPIO-13 ~WR out
		   GPIO-14 ~RD out
		   GPIO-15 ~RDY in
		   GPIO-16 TCK out
		   GPIO-17 TDO in
		   GPIO-18 TDI out
		 */
		cx_set(GP0_IO, 0x00060000); /* GPIO-1,2 as out */
		/* GPIO-0 as INT, reset & TMS low */
		cx_clear(GP0_IO, 0x00010006);
		mdelay(100);/* reset delay */
		cx_set(GP0_IO, 0x00000004); /* reset high */
		cx_write(MC417_CTL, 0x00000037);/* enable GPIO-3..18 pins */
		/* GPIO-17 is TDO in, GPIO-15 is ~RDY in, rest is out */
		cx_write(MC417_OEN, 0x00005000);
		/* ~RD, ~WR high; ADDR low; ~CS high */
		cx_write(MC417_RWD, 0x00000d00);
		/* enable irq */
		cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/
		break;
	}
}

int cx23885_ir_init(struct cx23885_dev *dev)
{
	static struct v4l2_subdev_io_pin_config ir_rxtx_pin_cfg[] = {
		{
			.flags	  = V4L2_SUBDEV_IO_PIN_INPUT,
			.pin	  = CX23885_PIN_IR_RX_GPIO19,
			.function = CX23885_PAD_IR_RX,
			.value	  = 0,
			.strength = CX25840_PIN_DRIVE_MEDIUM,
		}, {
			.flags	  = V4L2_SUBDEV_IO_PIN_OUTPUT,
			.pin	  = CX23885_PIN_IR_TX_GPIO20,
			.function = CX23885_PAD_IR_TX,
			.value	  = 0,
			.strength = CX25840_PIN_DRIVE_MEDIUM,
		}
	};
	const size_t ir_rxtx_pin_cfg_count = ARRAY_SIZE(ir_rxtx_pin_cfg);

	static struct v4l2_subdev_io_pin_config ir_rx_pin_cfg[] = {
		{
			.flags	  = V4L2_SUBDEV_IO_PIN_INPUT,
			.pin	  = CX23885_PIN_IR_RX_GPIO19,
			.function = CX23885_PAD_IR_RX,
			.value	  = 0,
			.strength = CX25840_PIN_DRIVE_MEDIUM,
		}
	};
	const size_t ir_rx_pin_cfg_count = ARRAY_SIZE(ir_rx_pin_cfg);

	struct v4l2_subdev_ir_parameters params;
	int ret = 0;
	switch (dev->board) {
	case CX23885_BOARD_HAUPPAUGE_HVR1500:
	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
	case CX23885_BOARD_HAUPPAUGE_HVR1800:
	case CX23885_BOARD_HAUPPAUGE_HVR1200:
	case CX23885_BOARD_HAUPPAUGE_HVR1400:
	case CX23885_BOARD_HAUPPAUGE_HVR1275:
	case CX23885_BOARD_HAUPPAUGE_HVR1255:
	case CX23885_BOARD_HAUPPAUGE_HVR1210:
		/* FIXME: Implement me */
		break;
	case CX23885_BOARD_HAUPPAUGE_HVR1270:
		ret = cx23888_ir_probe(dev);
		if (ret)
			break;
		dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_888_IR);
		v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
				 ir_rx_pin_cfg_count, ir_rx_pin_cfg);
		break;
	case CX23885_BOARD_HAUPPAUGE_HVR1850:
	case CX23885_BOARD_HAUPPAUGE_HVR1290:
		ret = cx23888_ir_probe(dev);
		if (ret)
			break;
		dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_888_IR);
		v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
				 ir_rxtx_pin_cfg_count, ir_rxtx_pin_cfg);
		/*
		 * For these boards we need to invert the Tx output via the
		 * IR controller to have the LED off while idle
		 */
		v4l2_subdev_call(dev->sd_ir, ir, tx_g_parameters, &params);
		params.enable = false;
		params.shutdown = false;
		params.invert_level = true;
		v4l2_subdev_call(dev->sd_ir, ir, tx_s_parameters, &params);
		params.shutdown = true;
		v4l2_subdev_call(dev->sd_ir, ir, tx_s_parameters, &params);
		break;
	case CX23885_BOARD_TEVII_S470:
		if (!enable_885_ir)
			break;
		dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
		if (dev->sd_ir == NULL) {
			ret = -ENODEV;
			break;
		}
		v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
				 ir_rx_pin_cfg_count, ir_rx_pin_cfg);
		break;
	case CX23885_BOARD_HAUPPAUGE_HVR1250:
		if (!enable_885_ir)
			break;
		dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
		if (dev->sd_ir == NULL) {
			ret = -ENODEV;
			break;
		}
		v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
				 ir_rxtx_pin_cfg_count, ir_rxtx_pin_cfg);
		break;
	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
		request_module("ir-kbd-i2c");
		break;
	}

	return ret;
}

void cx23885_ir_fini(struct cx23885_dev *dev)
{
	switch (dev->board) {
	case CX23885_BOARD_HAUPPAUGE_HVR1270:
	case CX23885_BOARD_HAUPPAUGE_HVR1850:
	case CX23885_BOARD_HAUPPAUGE_HVR1290:
		cx23885_irq_remove(dev, PCI_MSK_IR);
		cx23888_ir_remove(dev);
		dev->sd_ir = NULL;
		break;
	case CX23885_BOARD_TEVII_S470:
	case CX23885_BOARD_HAUPPAUGE_HVR1250:
		cx23885_irq_remove(dev, PCI_MSK_AV_CORE);
		/* sd_ir is a duplicate pointer to the AV Core, just clear it */
		dev->sd_ir = NULL;
		break;
	}
}

int netup_jtag_io(void *device, int tms, int tdi, int read_tdo)
{
	int data;
	int tdo = 0;
	struct cx23885_dev *dev = (struct cx23885_dev *)device;
	/*TMS*/
	data = ((cx_read(GP0_IO)) & (~0x00000002));
	data |= (tms ? 0x00020002 : 0x00020000);
	cx_write(GP0_IO, data);

	/*TDI*/
	data = ((cx_read(MC417_RWD)) & (~0x0000a000));
	data |= (tdi ? 0x00008000 : 0);
	cx_write(MC417_RWD, data);
	if (read_tdo)
		tdo = (data & 0x00004000) ? 1 : 0; /*TDO*/

	cx_write(MC417_RWD, data | 0x00002000);
	udelay(1);
	/*TCK*/
	cx_write(MC417_RWD, data);

	return tdo;
}

void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
{
	switch (dev->board) {
	case CX23885_BOARD_HAUPPAUGE_HVR1270:
	case CX23885_BOARD_HAUPPAUGE_HVR1850:
	case CX23885_BOARD_HAUPPAUGE_HVR1290:
		if (dev->sd_ir)
			cx23885_irq_add_enable(dev, PCI_MSK_IR);
		break;
	case CX23885_BOARD_TEVII_S470:
	case CX23885_BOARD_HAUPPAUGE_HVR1250:
		if (dev->sd_ir)
			cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE);
		break;
	}
}

void cx23885_card_setup(struct cx23885_dev *dev)
{
	struct cx23885_tsport *ts1 = &dev->ts1;
	struct cx23885_tsport *ts2 = &dev->ts2;

	static u8 eeprom[256];

	if (dev->i2c_bus[0].i2c_rc == 0) {
		dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
		tveeprom_read(&dev->i2c_bus[0].i2c_client,
			      eeprom, sizeof(eeprom));
	}

	switch (dev->board) {
	case CX23885_BOARD_HAUPPAUGE_HVR1250:
		if (dev->i2c_bus[0].i2c_rc == 0) {
			if (eeprom[0x80] != 0x84)
				hauppauge_eeprom(dev, eeprom+0xc0);
			else
				hauppauge_eeprom(dev, eeprom+0x80);
		}
		break;
	case CX23885_BOARD_HAUPPAUGE_HVR1500:
	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
	case CX23885_BOARD_HAUPPAUGE_HVR1400:
		if (dev->i2c_bus[0].i2c_rc == 0)
			hauppauge_eeprom(dev, eeprom+0x80);
		break;
	case CX23885_BOARD_HAUPPAUGE_HVR1800:
	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
	case CX23885_BOARD_HAUPPAUGE_HVR1200:
	case CX23885_BOARD_HAUPPAUGE_HVR1700:
	case CX23885_BOARD_HAUPPAUGE_HVR1270:
	case CX23885_BOARD_HAUPPAUGE_HVR1275:
	case CX23885_BOARD_HAUPPAUGE_HVR1255:
	case CX23885_BOARD_HAUPPAUGE_HVR1210:
	case CX23885_BOARD_HAUPPAUGE_HVR1850:
	case CX23885_BOARD_HAUPPAUGE_HVR1290:
		if (dev->i2c_bus[0].i2c_rc == 0)
			hauppauge_eeprom(dev, eeprom+0xc0);
		break;
	}

	switch (dev->board) {
	case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
		/* break omitted intentionally */
	case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
		ts1->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
		break;
	case CX23885_BOARD_HAUPPAUGE_HVR1800:
		/* Defaults for VID B - Analog encoder */
		/* DREQ_POL, SMODE, PUNC_CLK, MCLK_POL Serial bus + punc clk */
		ts1->gen_ctrl_val    = 0x10e;
		ts1->ts_clk_en_val   = 0x1; /* Enable TS_CLK */
		ts1->src_sel_val     = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;

		/* APB_TSVALERR_POL (active low)*/
		ts1->vld_misc_val    = 0x2000;
		ts1->hw_sop_ctrl_val = (0x47 << 16 | 188 << 4 | 0xc);

		/* Defaults for VID C */
		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
		break;
	case CX23885_BOARD_TBS_6920:
		ts1->gen_ctrl_val  = 0x4; /* Parallel */
		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
		break;
	case CX23885_BOARD_TEVII_S470:
	case CX23885_BOARD_DVBWORLD_2005:
		ts1->gen_ctrl_val  = 0x5; /* Parallel */
		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
		break;
	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
		ts1->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
		break;
	case CX23885_BOARD_MYGICA_X8506:
	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
		ts1->gen_ctrl_val  = 0x5; /* Parallel */
		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
		break;
	case CX23885_BOARD_MYGICA_X8558PRO:
		ts1->gen_ctrl_val  = 0x5; /* Parallel */
		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
		break;
	case CX23885_BOARD_HAUPPAUGE_HVR1250:
	case CX23885_BOARD_HAUPPAUGE_HVR1500:
	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
	case CX23885_BOARD_HAUPPAUGE_HVR1200:
	case CX23885_BOARD_HAUPPAUGE_HVR1700:
	case CX23885_BOARD_HAUPPAUGE_HVR1400:
	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
	case CX23885_BOARD_HAUPPAUGE_HVR1270:
	case CX23885_BOARD_HAUPPAUGE_HVR1275:
	case CX23885_BOARD_HAUPPAUGE_HVR1255:
	case CX23885_BOARD_HAUPPAUGE_HVR1210:
	case CX23885_BOARD_HAUPPAUGE_HVR1850:
	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
	case CX23885_BOARD_HAUPPAUGE_HVR1290:
	case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
	default:
		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
	}

	/* Certain boards support analog, or require the avcore to be
	 * loaded, ensure this happens.
	 */
	switch (dev->board) {
	case CX23885_BOARD_TEVII_S470:
	case CX23885_BOARD_HAUPPAUGE_HVR1250:
		/* Currently only enabled for the integrated IR controller */
		if (!enable_885_ir)
			break;
	case CX23885_BOARD_HAUPPAUGE_HVR1800:
	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
	case CX23885_BOARD_HAUPPAUGE_HVR1700:
	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
	case CX23885_BOARD_HAUPPAUGE_HVR1270:
	case CX23885_BOARD_HAUPPAUGE_HVR1850:
	case CX23885_BOARD_MYGICA_X8506:
	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
	case CX23885_BOARD_HAUPPAUGE_HVR1290:
	case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
	case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
		dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
				&dev->i2c_bus[2].i2c_adap,
				"cx25840", 0x88 >> 1, NULL);
		if (dev->sd_cx25840) {
			dev->sd_cx25840->grp_id = CX23885_HW_AV_CORE;
			v4l2_subdev_call(dev->sd_cx25840, core, load_fw);
		}
		break;
	}

	/* AUX-PLL 27MHz CLK */
	switch (dev->board) {
	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
		netup_initialize(dev);
		break;
	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: {
		int ret;
		const struct firmware *fw;
		const char *filename = "dvb-netup-altera-01.fw";
		char *action = "configure";
		struct altera_config netup_config = {
			.dev = dev,
			.action = action,
			.jtag_io = netup_jtag_io,
		};

		netup_initialize(dev);

		ret = request_firmware(&fw, filename, &dev->pci->dev);
		if (ret != 0)
			printk(KERN_ERR "did not find the firmware file. (%s) "
			"Please see linux/Documentation/dvb/ for more details "
			"on firmware-problems.", filename);
		else
			altera_init(&netup_config, fw);

		release_firmware(fw);
		break;
	}
	}
}

/* ------------------------------------------------------------------ */