Kconfig

#
#	EDAC Kconfig
#	Copyright (c) 2003 Linux Networx
#	Licensed and distributed under the GPL
#
# $Id: Kconfig,v 1.4.2.7 2005/07/08 22:05:38 dsp_llnl Exp $
#

menuconfig EDAC
	tristate "EDAC - error detection and reporting (EXPERIMENTAL)"
	depends on HAS_IOMEM
	depends on X86 && EXPERIMENTAL
	help
	  EDAC is designed to report errors in the core system.
	  These are low-level errors that are reported in the CPU or
	  supporting chipset or other subsystems:
	  memory errors, cache errors, PCI errors, thermal throttling, etc..
	  If unsure, select 'Y'.

	  If this code is reporting problems on your system, please
	  see the EDAC project web pages for more information at:

	  <http://bluesmoke.sourceforge.net/>

	  and:

	  <http://buttersideup.com/edacwiki>

	  There is also a mailing list for the EDAC project, which can
	  be found via the sourceforge page.

if EDAC

comment "Reporting subsystems"

config EDAC_DEBUG
	bool "Debugging"
	help
	  This turns on debugging information for the entire EDAC
	  sub-system. You can insert module with "debug_level=x", current
	  there're four debug levels (x=0,1,2,3 from low to high).
	  Usually you should select 'N'.

config EDAC_MM_EDAC
	tristate "Main Memory EDAC (Error Detection And Correction) reporting"
	default y
	help
	  Some systems are able to detect and correct errors in main
	  memory.  EDAC can report statistics on memory error
	  detection and correction (EDAC - or commonly referred to ECC
	  errors).  EDAC will also try to decode where these errors
	  occurred so that a particular failing memory module can be
	  replaced.  If unsure, select 'Y'.


config EDAC_AMD76X
	tristate "AMD 76x (760, 762, 768)"
	depends on EDAC_MM_EDAC && PCI && X86_32
	help
	  Support for error detection and correction on the AMD 76x
	  series of chipsets used with the Athlon processor.

config EDAC_E7XXX
	tristate "Intel e7xxx (e7205, e7500, e7501, e7505)"
	depends on EDAC_MM_EDAC && PCI && X86_32
	help
	  Support for error detection and correction on the Intel
	  E7205, E7500, E7501 and E7505 server chipsets.

config EDAC_E752X
	tristate "Intel e752x (e7520, e7525, e7320)"
	depends on EDAC_MM_EDAC && PCI && X86 && HOTPLUG
	help
	  Support for error detection and correction on the Intel
	  E7520, E7525, E7320 server chipsets.

config EDAC_I82443BXGX
	tristate "Intel 82443BX/GX (440BX/GX)"
	depends on EDAC_MM_EDAC && PCI && X86_32
	depends on BROKEN
	help
	  Support for error detection and correction on the Intel
	  82443BX/GX memory controllers (440BX/GX chipsets).

config EDAC_I82875P
	tristate "Intel 82875p (D82875P, E7210)"
	depends on EDAC_MM_EDAC && PCI && X86_32
	help
	  Support for error detection and correction on the Intel
	  DP82785P and E7210 server chipsets.

config EDAC_I3000
	tristate "Intel 3000/3010"
	depends on EDAC_MM_EDAC && PCI && X86_32
	help
	  Support for error detection and correction on the Intel
	  3000 and 3010 server chipsets.

config EDAC_I82860
	tristate "Intel 82860"
	depends on EDAC_MM_EDAC && PCI && X86_32
	help
	  Support for error detection and correction on the Intel
	  82860 chipset.

config EDAC_R82600
	tristate "Radisys 82600 embedded chipset"
	depends on EDAC_MM_EDAC && PCI && X86_32
	help
	  Support for error detection and correction on the Radisys
	  82600 embedded chipset.

config EDAC_I5000
	tristate "Intel Greencreek/Blackford chipset"
	depends on EDAC_MM_EDAC && X86 && PCI
	help
	  Support for error detection and correction the Intel
	  Greekcreek/Blackford chipsets.

endif # EDAC