Summary: Declare GrainBytes, GrainWords, and CardsPerRegion as size_t.
Reviewed-by: jcoomes, tonyp, jmasa

Reviewed-by: kvn, twisti, jrose
Contributed-by: NKurt Miller &lt;kurt@intricatesoftware.com&gt;, Greg Lewis &lt;glewis@eyesbeyond.com&gt;, Jung-uk Kim &lt;jkim@freebsd.org&gt;, Christos Zoulas &lt;christos@zoulas.com&gt;, Landon Fuller &lt;landonf@plausible.coop&gt;, The FreeBSD Foundation &lt;board@freebsdfoundation.org&gt;, Michael Franz &lt;mvfranz@gmail.com&gt;, Roger Hoover &lt;rhoover@apple.com&gt;, Alexander Strange <astrange@apple.com>

Summary: When refactoring the code for a previous fix, a condition was not correctly negated which prevents the G1 policy from adding the correct number of old regions to the CSet when the young gen size is fixed. The changeset also fixes a small syntactical issue in g1ErgoVerbose.hpp which is causing compiler warnings.
Reviewed-by: brutisso, ysr

Summary: Pass the same object size value to both allocate and unallocate_object
Reviewed-by: ysr, brutisso

Reviewed-by: brutisso, johnc

7097053: G1: assert(da ? referent->is_oop() : referent->is_oop_or_null()) failed: referenceProcessor.cpp:1054
Summary: During remembered set scanning, the reference processor could discover a reference object whose referent was in the process of being copied and so may not be completely initialized. Do not perform reference discovery during remembered set scanning.
Reviewed-by: tonyp, ysr

7086533: G1: assert(!_g1->is_obj_dead(obj)): We should not be preserving dead objs: g1CollectedHeap.cpp:3835
Summary: Some objects may not be marked in the event of an evacuation failure in a partially young GC, during a marking cycle. Avoid this situation by not allowing partially young GCs during a marking cycle.
Reviewed-by: tonyp, ysr, brutisso

Summary: Fixed a few inconsistencies in the monitoring data, in particular when reported from jstat.
Reviewed-by: jmasa, brutisso, johnc

Summary: G1 now uses two reference processors - one is used by concurrent marking and the other is used by STW GCs (both full and incremental evacuation pauses). In an evacuation pause, the reference processor is embedded into the closures used to scan objects. Doing so causes causes reference objects to be 'discovered' by the reference processor. At the end of the evacuation pause, these discovered reference objects are processed - preserving (and copying) referent objects (and their reachable graphs) as appropriate.
Reviewed-by: ysr, jwilhelm, brutisso, stefank, tonyp

Reviewed-by: jcoomes, johnc

Summary: Cast HeapRegion::GrainBytes to size_t in output statement.
Reviewed-by: ysr, brutisso, pbk, tonyp

Summary: The desired min / max heap sizes are miscalculated at initialization when NewRatio is used. The changeset also includes an additional small change to turn a print statement into a warning.
Reviewed-by: johnc, jmasa, ysr, brutisso

Summary: Displays the elapsed time taken to perform reference processing during remark as part of the PrintGCDetails output.
Reviewed-by: ysr

Summary: As a result of the changes for 7080389, an evacuation failure during an initial mark pause may result in some root objects not being marked. Pass whether the caller is a root scanning closure into the evacuation failure handling code so that the thread that successfully forwards an object to itself also marks the object.
Reviewed-by: ysr, brutisso, tonyp

Summary: Extend the SA to recognize the G1CollectedHeap and implement any code that's needed by our serviceability tools (jmap, jinfo, jstack, etc.) that depend on the SA.
Reviewed-by: never, poonam, johnc

Reviewed-by: brutisso, ysr

Summary: Make G1 handle young gen size command line flags more consistently
Reviewed-by: tonyp, jwilhelm

Summary: Fixed inconsistencies and mistakes in the young list target length calculations so that a) the calculated target length is optimal (before, it was not), b) other parameters like max survivor size and max gc locker eden expansion are always consistent with the calculated target length (before, they were not always), and c) the resulting target length was always bound by desired min and max values (before, it was not).
Reviewed-by: brutisso, johnc

Summary: It introduces ergonomic decision logging in G1 for the following heuristics: heap sizing, collection set construction, concurrent cycle initiation, and partially-young GC start/end. The code has a bit of refactoring in a few places to make the decision logging possible. It also replaces alternative ad-hoc logging that we have under different parameters and switches (G1_DEBUG, G1PolicyVerbose).
Reviewed-by: johnc, ysr

Summary: Remove the sentinelRef and let the last Reference in a discovered chain point back to itself.
Reviewed-by: ysr, jmasa

Summary: Remove the macro assembler routine br_on_reg_cond() and replace the remaining calls to that routine with an equivalent.
Reviewed-by: kvn, iveresov

Summary: Refactor code marking code in the evacuation pause copy closures so that an evacuated object is only marked by the thread that successfully copies it.
Reviewed-by: stefank, brutisso, tonyp

Summary: Call {pre,post}_full_gc_dump() before and after a STW full gc of G1CollectedHeap. Also adjusted the prefix message, including the addition of missing whitespace.
Reviewed-by: brutisso, tonyp

7081064: G1: remove develop params G1FixedSurvivorSpaceSize, G1FixedTenuringThreshold, and G1FixedEdenSize
Summary: Remove three develop parameters we don't use.
Reviewed-by: brutisso, jwilhelm

Summary: Removed the possibility to turn off generational mode for G1.
Reviewed-by: johnc, ysr, tonyp

Summary: Refactor the allocation code during GC to use the G1AllocRegion abstraction. Use separate subclasses of G1AllocRegion for survivor and old regions. Avoid BOT updates and dirty survivor cards incrementally for the former.
Reviewed-by: brutisso, johnc, ysr

Summary: Align the reserved size of the heap and perm to the heap region size to get a preferred heap base that is aligned to the region size, and call the correct heap reservation constructor. Also add a check in the heap reservation code that the reserved space starts at the requested address (if any).
Reviewed-by: kvn, ysr

Summary: Avoid overcounting when CMS has concurrent mode failure.
Reviewed-by: ysr
Contributed-by: rednaxelafx@gmail.com

Summary: In root processing, move the scanning of the reference processor's discovered lists to before RSet updating and scanning. When scanning the reference processor's discovered lists, use a buffering closure so that the time spent copying any reference object is correctly attributed. Also removed a couple of unused and irrelevant timers.
Reviewed-by: ysr, jmasa

Reviewed-by: dholmes, never, jwilhelm, kvn

Summary: Extend and make more consistent the output from the G1PrintHeapRegions flag.
Reviewed-by: johnc, jmasa

Summary: Remove two unnecessary iterations over the collection set which are supposed to prepare the RSet's of the CSet regions for parallel iterations (we'll make sure this is done incrementally). I'll piggyback on this CR the removal of the G1_REM_SET_LOGGING code.
Reviewed-by: brutisso, johnc

Summary: Only cosmetic changes to make the concurrentMark.* more consistent, code-style-wise, with the rest of the codebase.
Reviewed-by: johnc, ysr

6916968: CMS: freeList.cpp:304 assert(_allocation_stats.prevSweep() + ..., "Conservation Principle")
Summary: Fix assert and adjust demand volume computation by adding missing factor.
Reviewed-by: jmasa, tonyp

Summary: Remove two unused parameters from the mem_allocate() method and update its uses accordingly.
Reviewed-by: stefank, johnc

Summary: When ExplicitGCInvokesConcurrent is enabled, do not perform an evacuation pause if a marking cycle is already in progress and block the requesting thread until the marking cycle completes.
Reviewed-by: tonyp, ysr

Summary: Perform a heap verification after the first phase of G1's full GC using objects' mark words to determine liveness. The third parameter of the heap verification routines, which was used in G1 to determine which marking bitmap to use in liveness calculations, has been changed from a boolean to an enum with values defined for using the mark word, and the 'prev' and 'next' bitmaps.
Reviewed-by: tonyp, ysr

Summary: Some optimizations to improve the concurrent marking phase: specialize the main oop closure, make sure a few methods in the fast path are properly inlined, a few more bits and pieces, and some cosmetic fixes.
Reviewed-by: stefank, johnc

Summary: supply optinal flags to realize gc log rotation
Reviewed-by: ysr, jwilhelm

7042285: G1: native memory leak during humongous object allocation
6804436: G1: heap region indices should be size_t
Summary: A series of fixes and improvements to the HeapRegionSeq class: a) replace the _regions growable array with a standard C array, b) avoid de-allocating / re-allocating HeapRegion instances when the heap shrinks / grows (fix for 7042285), c) introduce fast method to map address to HeapRegion via a "biased" array pointer, d) embed the _hrs object in G1CollectedHeap, instead of pointing to it via an indirection, e) assume that all the regions added to the HeapRegionSeq instance are contiguous, f) replace int's with size_t's for indexes (and expand that to HeapRegion as part of 6804436), g) remove unnecessary / unused methods, h) rename a couple of fields (_alloc_search_start and _seq_bottom), i) fix iterate_from() not to always start from index 0 irrespective of the region passed to it, j) add a verification method to check the HeapRegionSeq assumptions, k) always call the wrappers for _hrs.iterate(), _hrs_length(), and _hrs.at() from G1CollectedHeap, not those methods directly, and l) unify the code that expands the sequence (by either re-using or creating a new HeapRegion) and make it robust wrt to a HeapRegion allocation failing.
Reviewed-by: stefank, johnc, brutisso