Reviewed-by: acorn, coleenp, sla
Contributed-by: NKaren Kinnear &lt;karen.kinnear@oracle.com&gt;, Bengt Rutisson &lt;bengt.rutisson@oracle.com&gt;, Calvin Cheung &lt;calvin.cheung@oracle.com&gt;, Erik Gahlin &lt;erik.gahlin@oracle.com&gt;, Erik Helin &lt;erik.helin@oracle.com&gt;, Jesper Wilhelmsson &lt;jesper.wilhelmsson@oracle.com&gt;, Keith McGuigan &lt;keith.mcguigan@oracle.com&gt;, Mattias Tobiasson &lt;mattias.tobiasson@oracle.com&gt;, Markus Gronlund &lt;markus.gronlund@oracle.com&gt;, Mikael Auno &lt;mikael.auno@oracle.com&gt;, Nils Eliasson &lt;nils.eliasson@oracle.com&gt;, Nils Loodin &lt;nils.loodin@oracle.com&gt;, Rickard Backman &lt;rickard.backman@oracle.com&gt;, Staffan Larsen &lt;staffan.larsen@oracle.com&gt;, Stefan Karlsson &lt;stefan.karlsson@oracle.com&gt;, Yekaterina Kantserova <yekaterina.kantserova@oracle.com>

Summary: Create G1ParGCAllocBufferContainer to contain two buffers instead of previously using one buffer, in order to hold the first priority buffer longer. Thus, when some large objects hits the value of free space left in the first priority buffer it has an alternative to fit in the second priority buffer while the first priority buffer is given more chances to try allocating smaller objects. Overall, it will improve heap space efficiency.
Reviewed-by: johnc, jmasa, brutisso
Contributed-by: Ntamao <tao.mao@oracle.com>

Reviewed-by: brutisso, tschatzl

Reviewed-by: brutisso, jmasa

Summary: Keep a counter of how many times we were stalled by the GC locker, add a diagnostic flag which sets the limit.
Reviewed-by: brutisso, ehelin, johnc

Summary: Stack allocate instances of HeapRegionRemSetIterator during RSet scanning.
Reviewed-by: brutisso, jwilhelm

Reviewed-by: tschatzl, jmasa

Summary: Use Stack<> instead of GrowableArray to keep track of preserved marks. Also reviewed by vitalyd@gmail.com.
Reviewed-by: johnc, jcoomes

Summary: Divide by zero error, if ParallelGCThreads is 0, when adjusting the PLAB size.
Reviewed-by: jmasa, jcoomes

Summary: Reset the fields in ParGCAllocBuffer, that are used for accumulating values for the ResizePLAB sensors in PLABStats, to zero after flushing the values to the PLABStats fields. Flush PLABStats values only when retiring the final allocation buffers prior to disposing of a G1ParScanThreadState object, rather than when retiring every allocation buffer.
Reviewed-by: jwilhelm, jmasa, ysr

Summary: Move the first part of the GC logging, including timestamp, to the start of the GC
Reviewed-by: johnc, jwilhelm

Summary: Remove PermGen, allocate meta-data in metaspace linked to class loaders, rewrite GC walking, rewrite and rename metadata to be C++ classes
Reviewed-by: jmasa, stefank, never, coleenp, kvn, brutisso, mgerdin, dholmes, jrose, twisti, roland
Contributed-by: Njmasa &lt;jon.masamitsu@oracle.com&gt;, stefank &lt;stefan.karlsson@oracle.com&gt;, mgerdin &lt;mikael.gerdin@oracle.com&gt;, never <tom.rodriguez@oracle.com>

Summary: Add the flags G1EvacuationFailureALot flag (and supporting flags) to force trigger evacuation failures. The support flags control how often to trigger an evacuation failure and during which types of evacuation pause. This functionality is analogous to that of PromotionFailureALot for the other collectors.
Reviewed-by: brutisso

7178363: G1: Remove the serial code for PrintGCDetails and make it a special case of the parallel code
Summary: Also reviewed by vitalyd@gmail.com. Introduced the WorkerDataArray class. Fixed some minor logging bugs.
Reviewed-by: johnc, mgerdin

Summary: Correct the result value of G1CollectedHeap::pending_card_num(). Change the code that calculates the GC efficiency of a non-young heap region to use historical data from mixed GCs and the actual number of live bytes when predicting how long it would take to collect the region. Changes were also reviewed by Thomas Schatzl.
Reviewed-by: azeemj, brutisso

Summary: Employ PLABStats instances to record information about survivor and old PLABs, and use the recorded stats to adjust the sizes of survivor and old PLABS.
Reviewed-by: johnc, ysr
Contributed-by: NBrandon Mitchell <brandon@twitter.com>

Summary: Various cleanups as a prelude to introducing iterators for HeapRegions.
Reviewed-by: johnc, brutisso

7151532: DCmd for hotspot native memory tracking
Summary: Implementation of native memory tracking phase 1, which tracks VM native memory usage, and related DCmd
Reviewed-by: acorn, coleenp, fparain

Reviewed-by: azeemj, jmasa

Summary: Change the type of fields / variables / etc. that represent region counts and indeces from size_t to uint.
Reviewed-by: iveresov, brutisso, jmasa, jwilhelm

Summary: removed oop_verify_old_oop and allow_dirty. Also reviewed by: alexlamsl@gmail.com
Reviewed-by: jmasa, jwilhelm

Summary: Removed lots of dead code after some recent conc mark changes.
Reviewed-by: brutisso, johnc

Reviewed-by: tonyp, johnc

Summary: Revamp of the mechanism that chooses old regions for inclusion in the CSet. It simplifies the code and introduces min and max bounds on the number of old regions added to the CSet at each mixed GC to avoid pathological cases. It also ensures that when we do a mixed GC we'll always find old regions to add to the CSet (i.e., it eliminates the case where a mixed GC will collect no old regions which can happen today).
Reviewed-by: johnc, brutisso

Summary: If we try to schedule an initial-mark GC in order to explicit start a conc mark cycle and it gets pre-empted by antoher GC, we should retry the attempt as long as it's appropriate for the GC cause.
Reviewed-by: brutisso, johnc

Summary: Remove the separate counting phase of concurrent marking by tracking the amount of marked bytes and the cards spanned by marked objects in marking task/worker thread local data structures, which are updated as individual objects are marked.
Reviewed-by: brutisso, tonyp

Reviewed-by: tonyp, johnc

Summary: This change simplifies the interaction between GC and concurrent marking. By disabling survivor spaces during the initial-mark pause we don't need to propagate marks of objects we copy during each GC (since we never need to copy an explicitly marked object).
Reviewed-by: johnc, brutisso

Summary: Parallelize the removal of self forwarding pointers etc. by wrapping in a HeapRegion closure, which is then wrapped inside an AbstractGangTask.
Reviewed-by: tonyp, iveresov

Summary: Introduce a flag that is set when a heap expansion attempt during a GC fails so that we do not consantly attempt to expand the heap when it's going to fail anyway. This not only prevents the excessive ergo output (which is generated when a region allocation fails) but also avoids excessive and ultimately unsuccessful expansion attempts.
Reviewed-by: jmasa, johnc

Summary: Cache workers' calculated starting heap region, used for parallel iteration over the collcection set, for subsequent reuse.
Reviewed-by: tonyp, brutisso

Summary: Change variables representing the number of GC workers to uint from int and size_t.  Change the parameter in work(int i) to work(uint worker_id).
Reviewed-by: brutisso, tonyp

Summary: Fixed G1CollectedHeap::is_in, added tests, cleaned up comments and made Space::is_in pure virtual.
Reviewed-by: brutisso, tonyp, jcoomes

Summary: Parallelize the serial code that was used to mark objects reachable from survivor objects in the collection set. Some minor improvments in the timers used to track the freeing of the collection set along with some tweaks to PrintGCDetails.
Reviewed-by: tonyp, brutisso

Reviewed-by: johnc, brutisso, poonam

Summary: Keep track of all the old regions in the heap with a heap region set.
Reviewed-by: brutisso, johnc

Summary: Remove the extra guard to allow G1 to use ReduceInitialCardMarks
Reviewed-by: jmasa, tonyp, johnc, ysr

Summary: Fixed a few inconsistencies in the monitoring data, in particular when reported from jstat.
Reviewed-by: jmasa, brutisso, johnc

Summary: G1 now uses two reference processors - one is used by concurrent marking and the other is used by STW GCs (both full and incremental evacuation pauses). In an evacuation pause, the reference processor is embedded into the closures used to scan objects. Doing so causes causes reference objects to be 'discovered' by the reference processor. At the end of the evacuation pause, these discovered reference objects are processed - preserving (and copying) referent objects (and their reachable graphs) as appropriate.
Reviewed-by: ysr, jwilhelm, brutisso, stefank, tonyp

Summary: As a result of the changes for 7080389, an evacuation failure during an initial mark pause may result in some root objects not being marked. Pass whether the caller is a root scanning closure into the evacuation failure handling code so that the thread that successfully forwards an object to itself also marks the object.
Reviewed-by: ysr, brutisso, tonyp