Reviewed-by: brutisso, tschatzl

Summary: Improve the output of G1PrintRegionLivenessInfo by adding a per-region remembered set size information column
Reviewed-by: jwilhelm, johnc

Reviewed-by: brutisso, jmasa

Summary: Skip reference processing if the global marking stack overflows during remark. Refactor and rename set_phase(); move code that sets the concurrency level into its own routine. Do not call set_phase() from within parallel reference processing; use the concurrency level routine instead. The marking state should only set reset by CMTask[0] during the concurrent phase of the marking cycle; if an overflow occurs at any stage during the remark, the marking state will be reset after reference processing.
Reviewed-by: brutisso, jmasa

Summary: In CMTask::do_marking_step(), Skip offering termination and entering the first and second synchronization barriers if called from a serial context, i.e. the VM thread.
Reviewed-by: brutisso, tschatzl

Summary: Update the task local finger to the start of the next object when marking aborts, in order to avoid the redundant scanning of all 0's when the marking task restarts, if otherwise updating to the next word. In addition, reuse the routine nextObject() in routine iterate().
Reviewed-by: johnc, ysr
Contributed-by: Ntamao <tao.mao@oracle.com>

Summary: Reuse the parallel reference processing oop closures during serial reference processing.
Reviewed-by: brutisso

Summary: Check that the concurrent marking worker gang exists in ConcurrentMark::print_worker_threads_on(). Changes were also reviewed by Vitaly Davidovich <vitalyd@gmail.com>.
Reviewed-by: brutisso

Summary: Reset the marking state, including the mark stack overflow flag, in the event of a marking stack overflow during serial reference processing.
Reviewed-by: jmasa

Summary: Change the type of various task num fields, parameters etc to unsigned and rename them to be more consistent with the other collectors. Code changes were also reviewed by Vitaly Davidovich.
Reviewed-by: johnc
Contributed-by: NKaushik Srenevasan <kaushik@twitter.com>

Summary: Set the value of MarkStackSize to a value based on the number of parallel marking threads with a reasonable minimum. Expand the marking stack if we have to restart marking due to an overflow up to a reasonable maximum. Allocate the underlying space for the marking stack from virtual memory.
Reviewed-by: jmasa, brutisso

Summary: The clipping code in the routine that sets the bits for a range of cards, in the liveness accounting verification code was incorrect. It set all the bits in the card bitmap from the given starting index which would lead to spurious marking verification failures.
Reviewed-by: brutisso, jwilhelm, jmasa

7151532: DCmd for hotspot native memory tracking
Summary: Implementation of native memory tracking phase 1, which tracks VM native memory usage, and related DCmd
Reviewed-by: acorn, coleenp, fparain

Summary: Change the type of fields / variables / etc. that represent region counts and indeces from size_t to uint.
Reviewed-by: iveresov, brutisso, jmasa, jwilhelm

Summary: Removed lots of dead code after some recent conc mark changes.
Reviewed-by: brutisso, johnc

Summary: Re-enable survivors during the initial-mark pause. Afterwards, the concurrent marking threads have to scan them and mark everything reachable from them. The next GC will have to wait for the survivors to be scanned.
Reviewed-by: brutisso, johnc

Summary: Remove the separate counting phase of concurrent marking by tracking the amount of marked bytes and the cards spanned by marked objects in marking task/worker thread local data structures, which are updated as individual objects are marked.
Reviewed-by: brutisso, tonyp

Summary: Removed references to CMS in the concurrentMark.cpp/hpp files.
Reviewed-by: tonyp, jmasa, johnc

Summary: There is a high number of mispredicted branches associated with calling BitMap::iteratate() from within CMBitMapRO::iterate(). Implement a version of CMBitMapRO::iterate() directly using inline-able routines.
Reviewed-by: tonyp, iveresov

Summary: This change simplifies the interaction between GC and concurrent marking. By disabling survivor spaces during the initial-mark pause we don't need to propagate marks of objects we copy during each GC (since we never need to copy an explicitly marked object).
Reviewed-by: johnc, brutisso

Summary: Running G1 with ParallelGCThreads==0 results in various crashes and asserts. Most of these are caused by unguarded references to the worker threads array or an incorrect number of active workers.
Reviewed-by: jmasa, tonyp

Summary: Change variables representing the number of GC workers to uint from int and size_t.  Change the parameter in work(int i) to work(uint worker_id).
Reviewed-by: brutisso, tonyp

Summary: Parallelize the serial code that was used to mark objects reachable from survivor objects in the collection set. Some minor improvments in the timers used to track the freeing of the collection set along with some tweaks to PrintGCDetails.
Reviewed-by: tonyp, brutisso

Summary: G1 now uses two reference processors - one is used by concurrent marking and the other is used by STW GCs (both full and incremental evacuation pauses). In an evacuation pause, the reference processor is embedded into the closures used to scan objects. Doing so causes causes reference objects to be 'discovered' by the reference processor. At the end of the evacuation pause, these discovered reference objects are processed - preserving (and copying) referent objects (and their reachable graphs) as appropriate.
Reviewed-by: ysr, jwilhelm, brutisso, stefank, tonyp

Summary: Removed the possibility to turn off generational mode for G1.
Reviewed-by: johnc, ysr, tonyp

Summary: Select number of GC threads dynamically based on heap usage and number of Java threads
Reviewed-by: johnc, ysr, jcoomes

Summary: Only cosmetic changes to make the concurrentMark.* more consistent, code-style-wise, with the rest of the codebase.
Reviewed-by: johnc, ysr

Summary: Perform a heap verification after the first phase of G1's full GC using objects' mark words to determine liveness. The third parameter of the heap verification routines, which was used in G1 to determine which marking bitmap to use in liveness calculations, has been changed from a boolean to an enum with values defined for using the mark word, and the 'prev' and 'next' bitmaps.
Reviewed-by: tonyp, ysr

Summary: Some optimizations to improve the concurrent marking phase: specialize the main oop closure, make sure a few methods in the fast path are properly inlined, a few more bits and pieces, and some cosmetic fixes.
Reviewed-by: stefank, johnc

Summary: During an evacuation pause clear the region fields of any concurrent marking task whose local finger points into the collection set as the values in the region fields will become stale. Clearing these fields causes the concurrent mark task to claim a new region when marking restarts after the pause.
Reviewed-by: tonyp, iveresov

7034139: G1: assert(Thread::current()->is_ConcurrentGC_thread()) failed: only a conc GC thread can call this.
Summary: We were calling STS join and leave during a STW pause and we are not suppoesed to. I now only call those during  concurrent phase. I also added stress code in the non-product builds to force an overflows (the condition that ws uncovering the bug) to make sure it does not happen again.
Reviewed-by: johnc, brutisso

Summary: Repurpose the existing flag G1PrintRegionLivenessInfo to print out the liveness distribution across the regions in the heap at the end of marking.
Reviewed-by: iveresov, jwilhelm

Summary: Implement support for ParallelRefProcEnabled in the reference processing that takes place at the end of G1 concurrent marking.
Reviewed-by: tonyp, ysr

Summary: This changeset removes the zero-filling thread from G1 and collapses the two free region lists we had before (the "free" and "unclean" lists) into one. The new free list uses the new heap region sets / lists abstractions that we'll ultimately use it to keep track of all regions in the heap. A heap region set was also introduced for the humongous regions. Finally, this change increases the concurrency between the thread that completes freeing regions (after a cleanup pause) and the rest of the system (before we'd have to wait for said thread to complete before allocating a new region). The changest also includes a lot of refactoring and code simplification.
Reviewed-by: jcoomes, johnc

Summary: Initialize the _is_alive_non_header field of G1's reference processor with an instance of the G1CMIsAliveClosure. This will stop adding reference objects with live referents to the discovered reference lists unnecessarily.
Reviewed-by: tonyp, ysr, jwilhelm, brutisso

Summary: Replaced MakeDeps and the includeDB files with more standardized solutions.
Reviewed-by: coleenp, kvn, kamg

Summary: Re-enable use of the lock-free versions of region stack push() and pop() by recording aborted regions in a thread-local structure, which are then processed when scanning of the region stack restarts. The previous locking versions of these routines are retained for diagnostic purposes.
Reviewed-by: tonyp, ysr

Summary: Change all the Sun copyrights to Oracle copyright
Reviewed-by: ohair

6871109: G1: remove the concept of the scan only prefix
Summary: Removed scan only regions and associated code. The young portion of the collection set is now constructed incrementally - when a young region is retired as the current allocation region it is added to the collection set.
Reviewed-by: apetrusenko, iveresov, tonyp

Summary: Calling the methods region_stack_push() and region_stack_pop() concurrent is not MT-safe. The assumption is that we will only call region_stack_push() during a GC pause and region_stack_pop() during marking. Unfortunately, we also call region_stack_push() during marking which seems to be introducing subtle marking failures. This change introduces lock-based methods for pushing / popping to be called during marking.
Reviewed-by: iveresov, johnc