Summary: Removed the possibility to turn off generational mode for G1.
Reviewed-by: johnc, ysr, tonyp

Summary: Extend and make more consistent the output from the G1PrintHeapRegions flag.
Reviewed-by: johnc, jmasa

Summary: Only cosmetic changes to make the concurrentMark.* more consistent, code-style-wise, with the rest of the codebase.
Reviewed-by: johnc, ysr

Summary: Perform a heap verification after the first phase of G1's full GC using objects' mark words to determine liveness. The third parameter of the heap verification routines, which was used in G1 to determine which marking bitmap to use in liveness calculations, has been changed from a boolean to an enum with values defined for using the mark word, and the 'prev' and 'next' bitmaps.
Reviewed-by: tonyp, ysr

Summary: Some optimizations to improve the concurrent marking phase: specialize the main oop closure, make sure a few methods in the fast path are properly inlined, a few more bits and pieces, and some cosmetic fixes.
Reviewed-by: stefank, johnc

Summary: During an evacuation pause clear the region fields of any concurrent marking task whose local finger points into the collection set as the values in the region fields will become stale. Clearing these fields causes the concurrent mark task to claim a new region when marking restarts after the pause.
Reviewed-by: tonyp, iveresov

7035144: G1: nightly failure: Non-dirty cards in region that should be dirty (failures still exist...)
Summary: We should only undirty cards after we decide that they are not on a young region, not before. The fix also includes improvements to the verify_dirty_region() method which print out which cards were not found dirty.
Reviewed-by: johnc, brutisso

7034139: G1: assert(Thread::current()->is_ConcurrentGC_thread()) failed: only a conc GC thread can call this.
Summary: We were calling STS join and leave during a STW pause and we are not suppoesed to. I now only call those during  concurrent phase. I also added stress code in the non-product builds to force an overflows (the condition that ws uncovering the bug) to make sure it does not happen again.
Reviewed-by: johnc, brutisso

Summary: Use _max_num_q = max(discovery_degree, processing_degree), and let balance_queues() redistribute from discovery_degree to processing_degree of queues. This should also allow a more dynamic and flexible parallelism policy in the future.
Reviewed-by: jmasa, johnc

Summary: Some G1 code cleanup.
Reviewed-by: johnc, jcoomes, jwilhelm

Summary: Disable reference discovery and processing during concurrent marking by disabling fix for 6994628.
Reviewed-by: tonyp, ysr

Summary: Repurpose the existing flag G1PrintRegionLivenessInfo to print out the liveness distribution across the regions in the heap at the end of marking.
Reviewed-by: iveresov, jwilhelm

Summary: move symbols from permgen into C heap and reference count them
Reviewed-by: never, acorn, jmasa, stefank

Summary: A race between the concurrent cleanup thread and the VM thread while it is processing the "expanded sparse table list" causes both threads to try to free the same sparse table entry and either causes one of the threads to fail or leaves the entry in an inconsistent state. The solution is purge all entries on the expanded list that correspond go regions that are being cleaned up.
Reviewed-by: brutisso, johnc

Summary: Implement support for ParallelRefProcEnabled in the reference processing that takes place at the end of G1 concurrent marking.
Reviewed-by: tonyp, ysr

Summary: This changeset removes the zero-filling thread from G1 and collapses the two free region lists we had before (the "free" and "unclean" lists) into one. The new free list uses the new heap region sets / lists abstractions that we'll ultimately use it to keep track of all regions in the heap. A heap region set was also introduced for the humongous regions. Finally, this change increases the concurrency between the thread that completes freeing regions (after a cleanup pause) and the rest of the system (before we'd have to wait for said thread to complete before allocating a new region). The changest also includes a lot of refactoring and code simplification.
Reviewed-by: jcoomes, johnc

Summary: This changeset introduces filtering of SATB buffers at the point when they are about to be enqueued. If this filtering clears enough entries on each buffer, the buffer can then be re-used and not enqueued. This cuts down the number of SATB buffers that need to be processed by the concurrent marking threads.
Reviewed-by: johnc, ysr

Summary: Make JvmtiGCMark safe to run non-safepoint and instrument CMS
Reviewed-by: ysr, dcubed

Summary: Initialize the _is_alive_non_header field of G1's reference processor with an instance of the G1CMIsAliveClosure. This will stop adding reference objects with live referents to the discovered reference lists unnecessarily.
Reviewed-by: tonyp, ysr, jwilhelm, brutisso

Summary: Enable reference discovery during concurrent marking by setting the reference processor field of the concurrent marking closure. Keep reference objects on the discovered reference lists alive during incremental evacuation pauses until they are processed at the end of concurrent marking.
Reviewed-by: ysr, tonyp

Summary: Replaced MakeDeps and the includeDB files with more standardized solutions.
Reviewed-by: coleenp, kvn, kamg

6988458: G1: assert(mr.end() <= _cm->finger()) failed: otherwise the region shouldn't be on the stack
Summary: The changes from 6941395 did not clear the CMTask::_aborted_region fields when concurrent marking aborted because of overflow. As a result, the next time around we could see a memory region whose start address was above the global finger and the assertion tripped. Moved the clearing of the aborted regions to ConcurrentMark::clear_marking_state, which is executed on all of the exit paths.
Reviewed-by: tonyp, ysr, jmasa

Summary: Re-enable use of the lock-free versions of region stack push() and pop() by recording aborted regions in a thread-local structure, which are then processed when scanning of the region stack restarts. The previous locking versions of these routines are retained for diagnostic purposes.
Reviewed-by: tonyp, ysr

Summary: Associate number of GC workers with the workgang as opposed to the task.
Reviewed-by: johnc, ysr

6975964: G1: print out a more descriptive message for evacuation failure when +PrintGCDetails is set
Summary: we're renaming "evacuation failure" to "to-space overflow". I'm also piggy-backing a small additional change which removes the "Mark closure took..." output.
Reviewed-by: ysr, johnc

Summary: Change all the Sun copyrights to Oracle copyright
Reviewed-by: ohair

Reviewed-by: kamg, ysr, dholmes, johnc

Summary: Make sure that two marking cycles do not overlap, i.e., a new one can only start after the concurrent marking thread finishes all its work. In the fix I piggy-back a couple of minor extra fixes: some general code reformatting for consistency (only around the code I modified), the removal of a field (G1CollectorPolicy::_should_initiate_conc_mark) which doesn't seem to be used at all (it's only set but never read), as well as moving the "is GC locker active" test earlier into the G1 pause / Full GC and using a more appropriate method for it.
Reviewed-by: johnc, jmasa, jcoomes, ysr

Summary: Calling the methods region_stack_push() and region_stack_pop() concurrent is not MT-safe. The assumption is that we will only call region_stack_push() during a GC pause and region_stack_pop() during marking. Unfortunately, we also call region_stack_push() during marking which seems to be introducing subtle marking failures. This change introduces lock-based methods for pushing / popping to be called during marking.
Reviewed-by: iveresov, johnc

Summary: Various fixes to the G1 debugging output.
Reviewed-by: johnc, iveresov

Summary: Newly-created threads always had the active field of their SATB queue initialized to false, even if they were created during marking. As a result, updates from threads created during a marking cycle were never enqueued and never processed. The fix includes remaining a method from active() to is_active() for readability and naming consistency.
Reviewed-by: ysr, johnc

Summary: If CM task was aborted while scanning the last object of the specified region and the size of that object is equal to bitmap's granularity then the next offset would be equal or over the region limit which is exactly what the assertion states.
Reviewed-by: ysr, tonyp, jmasa

Summary: Rename marking stack sizing flags to be common between G1 and CMS
Reviewed-by: ysr, tonyp

Summary: Rename G1 parameters to make them more consistent.
Reviewed-by: jmasa, johnc

Summary: Reworked the concurrent refinement: threads activation, feedback-based threshold adjustment, other miscellaneous fixes.
Reviewed-by: apetrusenko, tonyp

Reviewed-by: tonyp, ysr

Summary: change more guarantees in concurrent marking into asserts.
Reviewed-by: apetrusenko, iveresov

Summary: Remove incorrect guarantee.
Reviewed-by: apetrusenko, iveresov

Summary: When G1 is enabled, thread dumps are inconsistent as the info for some of the G1 threads is not formatted properly.
Reviewed-by: ysr, johnc

Summary: Revamp the reachable object dump debugging facility.
Reviewed-by: jmasa, apetrusenko