Summary: Move some G1 specific code from CardTableModRefBS to G1SATBCardTableModRefBS.
Reviewed-by: brutisso, tschatzl, ehelin

Summary: Add memory consumption breakdown on a per region type in the G1 remembered set summary statistics. This simplifies remembered set memory consumption analysis.
Reviewed-by: brutisso

Summary: Add a list of nmethods to the RSet for a region that contain references into the region. Skip scanning the code cache during root scanning and scan the nmethod lists during RSet scanning instead.
Reviewed-by: tschatzl, brutisso, mgerdin, twisti, kvn

Summary: In a full GC, move the verification after the GC to after RSet rebuilding. Verify RSet entries during a full GC under control of a flag.
Reviewed-by: tschatzl, brutisso

Summary: Fixed the output of G1SummarizeRSetStats: too small datatype for the number of concurrently processed cards, added concurrent remembered set thread time retrieval for Linux and Windows (BSD uses os::elapsedTime() now), and other cleanup. The information presented during VM operation is now relative to the previous output, not always cumulative if G1SummarizeRSetStatsPeriod > 0. At VM exit, the code prints a cumulative summary.
Reviewed-by: johnc, jwilhelm

Summary: Refactor G1's hot card cache and card counts table into their own files. Simplify the card counts table, including removing the encoding of the card index in each entry. The card counts table now has a 1:1 correspondence with the cards spanned by heap. Space for the card counts table is reserved from virtual memory (rather than C heap) during JVM startup and is committed/expanded when the heap is expanded. Changes were also reviewed-by Vitaly Davidovich.
Reviewed-by: tschatzl, jmasa

Summary: Stack allocate instances of HeapRegionRemSetIterator during RSet scanning.
Reviewed-by: brutisso, jwilhelm

Summary: Remove PermGen, allocate meta-data in metaspace linked to class loaders, rewrite GC walking, rewrite and rename metadata to be C++ classes
Reviewed-by: jmasa, stefank, never, coleenp, kvn, brutisso, mgerdin, dholmes, jrose, twisti, roland
Contributed-by: Njmasa &lt;jon.masamitsu@oracle.com&gt;, stefank &lt;stefan.karlsson@oracle.com&gt;, mgerdin &lt;mikael.gerdin@oracle.com&gt;, never <tom.rodriguez@oracle.com>

7178363: G1: Remove the serial code for PrintGCDetails and make it a special case of the parallel code
Summary: Also reviewed by vitalyd@gmail.com. Introduced the WorkerDataArray class. Fixed some minor logging bugs.
Reviewed-by: johnc, mgerdin

Summary: Various cleanups as a prelude to introducing iterators for HeapRegions.
Reviewed-by: johnc, brutisso

Summary: Also reviewed by: vitalyd@gmail.com. Move the timing out of G1CollectorPolicy into the G1GCPhaseTimes class
Reviewed-by: johnc

7151532: DCmd for hotspot native memory tracking
Summary: Implementation of native memory tracking phase 1, which tracks VM native memory usage, and related DCmd
Reviewed-by: acorn, coleenp, fparain

Summary: Some minor profile based optimizations. Reduce the number of branches and branch mispredicts by removing some virtual calls, through closure specalization, and refactoring some conditional statements.
Reviewed-by: brutisso, tonyp

Summary: Change variables representing the number of GC workers to uint from int and size_t.  Change the parameter in work(int i) to work(uint worker_id).
Reviewed-by: brutisso, tonyp

Summary: Parallelize the serial code that was used to mark objects reachable from survivor objects in the collection set. Some minor improvments in the timers used to track the freeing of the collection set along with some tweaks to PrintGCDetails.
Reviewed-by: tonyp, brutisso

Summary: _cset_rs_update_cl[] was indexed with values beyond what it is set up to handle.
Reviewed-by: ysr, jmasa, johnc

7102445: G1: Unnecessary Resource allocations during RSet scanning
Summary: Add a new per-worker thread line in the PrintGCDetails output. GC Worker Other is the difference between the elapsed time for the parallel phase of the evacuation pause and the sum of the times of the sub-phases (external root scanning, mark stack scanning, RSet updating, RSet scanning, object copying, and termination) for that worker. During RSet scanning, stack allocate DirtyCardToOopClosure objects; allocating these in a resource area was causing abnormally high GC Worker Other times while the worker thread freed ResourceArea chunks.
Reviewed-by: tonyp, jwilhelm, brutisso

7097053: G1: assert(da ? referent->is_oop() : referent->is_oop_or_null()) failed: referenceProcessor.cpp:1054
Summary: During remembered set scanning, the reference processor could discover a reference object whose referent was in the process of being copied and so may not be completely initialized. Do not perform reference discovery during remembered set scanning.
Reviewed-by: tonyp, ysr

Summary: G1 now uses two reference processors - one is used by concurrent marking and the other is used by STW GCs (both full and incremental evacuation pauses). In an evacuation pause, the reference processor is embedded into the closures used to scan objects. Doing so causes causes reference objects to be 'discovered' by the reference processor. At the end of the evacuation pause, these discovered reference objects are processed - preserving (and copying) referent objects (and their reachable graphs) as appropriate.
Reviewed-by: ysr, jwilhelm, brutisso, stefank, tonyp

Summary: Select number of GC threads dynamically based on heap usage and number of Java threads
Reviewed-by: johnc, ysr, jcoomes

Summary: Major cleanup of the G1CollectorPolicy class. It removes a lot of unused fields and methods and also consolidates replicated information (mainly various ways of counting the number of CSet regions) into one copy.
Reviewed-by: johnc, brutisso

Summary: Remove two unnecessary iterations over the collection set which are supposed to prepare the RSet's of the CSet regions for parallel iterations (we'll make sure this is done incrementally). I'll piggyback on this CR the removal of the G1_REM_SET_LOGGING code.
Reviewed-by: brutisso, johnc

Summary: make the method non-virtual, remove five unused closures, and fix a couple of copyright typos.
Reviewed-by: stefank, johnc, poonam

7035144: G1: nightly failure: Non-dirty cards in region that should be dirty (failures still exist...)
Summary: We should only undirty cards after we decide that they are not on a young region, not before. The fix also includes improvements to the verify_dirty_region() method which print out which cards were not found dirty.
Reviewed-by: johnc, brutisso

7023747: G1: too strict assert in RefineRecordRefsIntoCSCardTableEntryClosure::do_card_ptr in g1RemSet.cpp
Summary: Made sure that the assert looks at ParallelGCThreads.
Reviewed-by: stefank, tonyp, jwilhelm, johnc

Summary: Some G1 code cleanup.
Reviewed-by: johnc, jcoomes, jwilhelm

7007446: G1: expand the heap with a single step, not one region at a time
Summary: Changed G1CollectedHeap::expand() to expand the committed space by calling VirtualSpace::expand_by() once rather than for every region in the expansion amount. This allows the success or failure of the expansion to be determined before creating any heap regions. Introduced a develop flag G1ExitOnExpansionFailure (false by default) that, when true, will exit the VM if the expansion of the committed space fails. Finally G1CollectedHeap::expand() returns a status back to it's caller so that the caller knows whether to attempt the allocation.
Reviewed-by: brutisso, tonyp

Summary: Replaced MakeDeps and the includeDB files with more standardized solutions.
Reviewed-by: coleenp, kvn, kamg

Summary: An evacuation failure while copying the roots caused an object, A, to be forwarded to itself. During the subsequent RSet updating a reference to A was processed causing the reference to be added to the RSet of A's heap region. As a result of adding to the remembered set we ran into the issue described in 6930581 - the sparse table expanded and the RSet scanning code walked the cards in one instance of RHashTable (_cur) while the occupied() counts the cards in the expanded table (_next).
Reviewed-by: tonyp, iveresov

Summary: Remove G1RemSet base class and StupidG1RemSet class; rename HRInto_G1RemSet to just G1RemSet.
Reviewed-by: ysr, tonyp

Summary: Associate number of GC workers with the workgang as opposed to the task.
Reviewed-by: johnc, ysr

6930581: G1: assert(ParallelGCThreads > 1 || n_yielded() == _hrrs->occupied(),"Should have yielded all the ..
Summary: During RSet updating, when ParallelGCThreads is zero, references that point into the collection set are added directly the referenced region's RSet. This can cause the sparse table in the RSet to expand. RSet scanning and the "occupied" routine will then operate on different instances of the sparse table causing the assert to trip. This may also cause some cards added post expansion to be missed during RSet scanning. When ParallelGCThreads is non-zero such references are recorded on the "references to be scanned" queue and the card containing the reference is recorded in a dirty card queue for use in the event of an evacuation failure. Employ the parallel code in the serial case to avoid expanding the RSets of regions in the collection set.
Reviewed-by: iveresov, ysr, tonyp

Summary: The per-worker _new_refs array is used to hold references that point into the collection set. It is populated during RSet updating and subsequently processed. In the event of an evacuation failure it processed again to recreate the RSets of regions in the collection set. Remove the per-worker _new_refs array by processing the references directly. Use a DirtyCardQueue to hold the cards containing the references so that the RSets of regions in the collection set can be recreated when handling an evacuation failure.
Reviewed-by: iveresov, jmasa, tonyp

Summary: During concurrent refinment, filter cards in young regions after it has been determined that the region has been allocated from and the young type of the region has been set.
Reviewed-by: iveresov, tonyp, jcoomes

Summary: Change all the Sun copyrights to Oracle copyright
Reviewed-by: ohair

Summary: Small improvements to G1's PrintGCDetails output. It also includes minor formatting details.
Reviewed-by: ysr, johnc

Summary: Rename G1 parameters to make them more consistent.
Reviewed-by: jmasa, johnc

Summary: Implemented block-based work stealing. Moved copying during the rset scanning phase to the main copying phase. Made the size of rset table depend on the region size.
Reviewed-by: apetrusenko, tonyp

Summary: The first worker thread is delayed when entering the GC because it clears the card count table that is used in identifying hot cards. Replace the card count table with a dynamically sized evicting hash table that includes an epoch based counter.
Reviewed-by: iveresov, tonyp

Summary: Modifications to G1 so as to allow the use of compressed oops.
Reviewed-by: apetrusenko, coleenp, jmasa, kvn, never, phh, tonyp