sharedRuntime_x86_32.cpp

/*
 * Copyright 2003-2008 Sun Microsystems, Inc.  All Rights Reserved.
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 *
 * This code is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 only, as
 * published by the Free Software Foundation.
 *
 * This code is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * version 2 for more details (a copy is included in the LICENSE file that
 * accompanied this code).
 *
 * You should have received a copy of the GNU General Public License version
 * 2 along with this work; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
 * CA 95054 USA or visit www.sun.com if you need additional information or
 * have any questions.
 *
 */

#include "incls/_precompiled.incl"
#include "incls/_sharedRuntime_x86_32.cpp.incl"

#define __ masm->
#ifdef COMPILER2
UncommonTrapBlob   *SharedRuntime::_uncommon_trap_blob;
#endif // COMPILER2

DeoptimizationBlob *SharedRuntime::_deopt_blob;
SafepointBlob      *SharedRuntime::_polling_page_safepoint_handler_blob;
SafepointBlob      *SharedRuntime::_polling_page_return_handler_blob;
RuntimeStub*       SharedRuntime::_wrong_method_blob;
RuntimeStub*       SharedRuntime::_ic_miss_blob;
RuntimeStub*       SharedRuntime::_resolve_opt_virtual_call_blob;
RuntimeStub*       SharedRuntime::_resolve_virtual_call_blob;
RuntimeStub*       SharedRuntime::_resolve_static_call_blob;

const int StackAlignmentInSlots = StackAlignmentInBytes / VMRegImpl::stack_slot_size;

class RegisterSaver {
  enum { FPU_regs_live = 8 /*for the FPU stack*/+8/*eight more for XMM registers*/ };
  // Capture info about frame layout
  enum layout {
                fpu_state_off = 0,
                fpu_state_end = fpu_state_off+FPUStateSizeInWords-1,
                st0_off, st0H_off,
                st1_off, st1H_off,
                st2_off, st2H_off,
                st3_off, st3H_off,
                st4_off, st4H_off,
                st5_off, st5H_off,
                st6_off, st6H_off,
                st7_off, st7H_off,

                xmm0_off, xmm0H_off,
                xmm1_off, xmm1H_off,
                xmm2_off, xmm2H_off,
                xmm3_off, xmm3H_off,
                xmm4_off, xmm4H_off,
                xmm5_off, xmm5H_off,
                xmm6_off, xmm6H_off,
                xmm7_off, xmm7H_off,
                flags_off,
                rdi_off,
                rsi_off,
                ignore_off,  // extra copy of rbp,
                rsp_off,
                rbx_off,
                rdx_off,
                rcx_off,
                rax_off,
                // The frame sender code expects that rbp will be in the "natural" place and
                // will override any oopMap setting for it. We must therefore force the layout
                // so that it agrees with the frame sender code.
                rbp_off,
                return_off,      // slot for return address
                reg_save_size };


  public:

  static OopMap* save_live_registers(MacroAssembler* masm, int additional_frame_words,
                                     int* total_frame_words, bool verify_fpu = true);
  static void restore_live_registers(MacroAssembler* masm);

  static int rax_offset() { return rax_off; }
  static int rbx_offset() { return rbx_off; }

  // Offsets into the register save area
  // Used by deoptimization when it is managing result register
  // values on its own

  static int raxOffset(void) { return rax_off; }
  static int rdxOffset(void) { return rdx_off; }
  static int rbxOffset(void) { return rbx_off; }
  static int xmm0Offset(void) { return xmm0_off; }
  // This really returns a slot in the fp save area, which one is not important
  static int fpResultOffset(void) { return st0_off; }

  // During deoptimization only the result register need to be restored
  // all the other values have already been extracted.

  static void restore_result_registers(MacroAssembler* masm);

};

OopMap* RegisterSaver::save_live_registers(MacroAssembler* masm, int additional_frame_words,
                                           int* total_frame_words, bool verify_fpu) {

  int frame_size_in_bytes =  (reg_save_size + additional_frame_words) * wordSize;
  int frame_words = frame_size_in_bytes / wordSize;
  *total_frame_words = frame_words;

  assert(FPUStateSizeInWords == 27, "update stack layout");

  // save registers, fpu state, and flags
  // We assume caller has already has return address slot on the stack
  // We push epb twice in this sequence because we want the real rbp,
  // to be under the return like a normal enter and we want to use pusha
  // We push by hand instead of pusing push
  __ enter();
  __ pusha();
  __ pushf();
  __ subptr(rsp,FPU_regs_live*sizeof(jdouble)); // Push FPU registers space
  __ push_FPU_state();          // Save FPU state & init

  if (verify_fpu) {
    // Some stubs may have non standard FPU control word settings so
    // only check and reset the value when it required to be the
    // standard value.  The safepoint blob in particular can be used
    // in methods which are using the 24 bit control word for
    // optimized float math.

#ifdef ASSERT
    // Make sure the control word has the expected value
    Label ok;
    __ cmpw(Address(rsp, 0), StubRoutines::fpu_cntrl_wrd_std());
    __ jccb(Assembler::equal, ok);
    __ stop("corrupted control word detected");
    __ bind(ok);
#endif

    // Reset the control word to guard against exceptions being unmasked
    // since fstp_d can cause FPU stack underflow exceptions.  Write it
    // into the on stack copy and then reload that to make sure that the
    // current and future values are correct.
    __ movw(Address(rsp, 0), StubRoutines::fpu_cntrl_wrd_std());
  }

  __ frstor(Address(rsp, 0));
  if (!verify_fpu) {
    // Set the control word so that exceptions are masked for the
    // following code.
    __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std()));
  }

  // Save the FPU registers in de-opt-able form

  __ fstp_d(Address(rsp, st0_off*wordSize)); // st(0)
  __ fstp_d(Address(rsp, st1_off*wordSize)); // st(1)
  __ fstp_d(Address(rsp, st2_off*wordSize)); // st(2)
  __ fstp_d(Address(rsp, st3_off*wordSize)); // st(3)
  __ fstp_d(Address(rsp, st4_off*wordSize)); // st(4)
  __ fstp_d(Address(rsp, st5_off*wordSize)); // st(5)
  __ fstp_d(Address(rsp, st6_off*wordSize)); // st(6)
  __ fstp_d(Address(rsp, st7_off*wordSize)); // st(7)

  if( UseSSE == 1 ) {           // Save the XMM state
    __ movflt(Address(rsp,xmm0_off*wordSize),xmm0);
    __ movflt(Address(rsp,xmm1_off*wordSize),xmm1);
    __ movflt(Address(rsp,xmm2_off*wordSize),xmm2);
    __ movflt(Address(rsp,xmm3_off*wordSize),xmm3);
    __ movflt(Address(rsp,xmm4_off*wordSize),xmm4);
    __ movflt(Address(rsp,xmm5_off*wordSize),xmm5);
    __ movflt(Address(rsp,xmm6_off*wordSize),xmm6);
    __ movflt(Address(rsp,xmm7_off*wordSize),xmm7);
  } else if( UseSSE >= 2 ) {
    __ movdbl(Address(rsp,xmm0_off*wordSize),xmm0);
    __ movdbl(Address(rsp,xmm1_off*wordSize),xmm1);
    __ movdbl(Address(rsp,xmm2_off*wordSize),xmm2);
    __ movdbl(Address(rsp,xmm3_off*wordSize),xmm3);
    __ movdbl(Address(rsp,xmm4_off*wordSize),xmm4);
    __ movdbl(Address(rsp,xmm5_off*wordSize),xmm5);
    __ movdbl(Address(rsp,xmm6_off*wordSize),xmm6);
    __ movdbl(Address(rsp,xmm7_off*wordSize),xmm7);
  }

  // Set an oopmap for the call site.  This oopmap will map all
  // oop-registers and debug-info registers as callee-saved.  This
  // will allow deoptimization at this safepoint to find all possible
  // debug-info recordings, as well as let GC find all oops.

  OopMapSet *oop_maps = new OopMapSet();
  OopMap* map =  new OopMap( frame_words, 0 );

#define STACK_OFFSET(x) VMRegImpl::stack2reg((x) + additional_frame_words)

  map->set_callee_saved(STACK_OFFSET( rax_off), rax->as_VMReg());
  map->set_callee_saved(STACK_OFFSET( rcx_off), rcx->as_VMReg());
  map->set_callee_saved(STACK_OFFSET( rdx_off), rdx->as_VMReg());
  map->set_callee_saved(STACK_OFFSET( rbx_off), rbx->as_VMReg());
  // rbp, location is known implicitly, no oopMap
  map->set_callee_saved(STACK_OFFSET( rsi_off), rsi->as_VMReg());
  map->set_callee_saved(STACK_OFFSET( rdi_off), rdi->as_VMReg());
  map->set_callee_saved(STACK_OFFSET(st0_off), as_FloatRegister(0)->as_VMReg());
  map->set_callee_saved(STACK_OFFSET(st1_off), as_FloatRegister(1)->as_VMReg());
  map->set_callee_saved(STACK_OFFSET(st2_off), as_FloatRegister(2)->as_VMReg());
  map->set_callee_saved(STACK_OFFSET(st3_off), as_FloatRegister(3)->as_VMReg());
  map->set_callee_saved(STACK_OFFSET(st4_off), as_FloatRegister(4)->as_VMReg());
  map->set_callee_saved(STACK_OFFSET(st5_off), as_FloatRegister(5)->as_VMReg());
  map->set_callee_saved(STACK_OFFSET(st6_off), as_FloatRegister(6)->as_VMReg());
  map->set_callee_saved(STACK_OFFSET(st7_off), as_FloatRegister(7)->as_VMReg());
  map->set_callee_saved(STACK_OFFSET(xmm0_off), xmm0->as_VMReg());
  map->set_callee_saved(STACK_OFFSET(xmm1_off), xmm1->as_VMReg());
  map->set_callee_saved(STACK_OFFSET(xmm2_off), xmm2->as_VMReg());
  map->set_callee_saved(STACK_OFFSET(xmm3_off), xmm3->as_VMReg());
  map->set_callee_saved(STACK_OFFSET(xmm4_off), xmm4->as_VMReg());
  map->set_callee_saved(STACK_OFFSET(xmm5_off), xmm5->as_VMReg());
  map->set_callee_saved(STACK_OFFSET(xmm6_off), xmm6->as_VMReg());
  map->set_callee_saved(STACK_OFFSET(xmm7_off), xmm7->as_VMReg());
  // %%% This is really a waste but we'll keep things as they were for now
  if (true) {
#define NEXTREG(x) (x)->as_VMReg()->next()
    map->set_callee_saved(STACK_OFFSET(st0H_off), NEXTREG(as_FloatRegister(0)));
    map->set_callee_saved(STACK_OFFSET(st1H_off), NEXTREG(as_FloatRegister(1)));
    map->set_callee_saved(STACK_OFFSET(st2H_off), NEXTREG(as_FloatRegister(2)));
    map->set_callee_saved(STACK_OFFSET(st3H_off), NEXTREG(as_FloatRegister(3)));
    map->set_callee_saved(STACK_OFFSET(st4H_off), NEXTREG(as_FloatRegister(4)));
    map->set_callee_saved(STACK_OFFSET(st5H_off), NEXTREG(as_FloatRegister(5)));
    map->set_callee_saved(STACK_OFFSET(st6H_off), NEXTREG(as_FloatRegister(6)));
    map->set_callee_saved(STACK_OFFSET(st7H_off), NEXTREG(as_FloatRegister(7)));
    map->set_callee_saved(STACK_OFFSET(xmm0H_off), NEXTREG(xmm0));
    map->set_callee_saved(STACK_OFFSET(xmm1H_off), NEXTREG(xmm1));
    map->set_callee_saved(STACK_OFFSET(xmm2H_off), NEXTREG(xmm2));
    map->set_callee_saved(STACK_OFFSET(xmm3H_off), NEXTREG(xmm3));
    map->set_callee_saved(STACK_OFFSET(xmm4H_off), NEXTREG(xmm4));
    map->set_callee_saved(STACK_OFFSET(xmm5H_off), NEXTREG(xmm5));
    map->set_callee_saved(STACK_OFFSET(xmm6H_off), NEXTREG(xmm6));
    map->set_callee_saved(STACK_OFFSET(xmm7H_off), NEXTREG(xmm7));
#undef NEXTREG
#undef STACK_OFFSET
  }

  return map;

}

void RegisterSaver::restore_live_registers(MacroAssembler* masm) {

  // Recover XMM & FPU state
  if( UseSSE == 1 ) {
    __ movflt(xmm0,Address(rsp,xmm0_off*wordSize));
    __ movflt(xmm1,Address(rsp,xmm1_off*wordSize));
    __ movflt(xmm2,Address(rsp,xmm2_off*wordSize));
    __ movflt(xmm3,Address(rsp,xmm3_off*wordSize));
    __ movflt(xmm4,Address(rsp,xmm4_off*wordSize));
    __ movflt(xmm5,Address(rsp,xmm5_off*wordSize));
    __ movflt(xmm6,Address(rsp,xmm6_off*wordSize));
    __ movflt(xmm7,Address(rsp,xmm7_off*wordSize));
  } else if( UseSSE >= 2 ) {
    __ movdbl(xmm0,Address(rsp,xmm0_off*wordSize));
    __ movdbl(xmm1,Address(rsp,xmm1_off*wordSize));
    __ movdbl(xmm2,Address(rsp,xmm2_off*wordSize));
    __ movdbl(xmm3,Address(rsp,xmm3_off*wordSize));
    __ movdbl(xmm4,Address(rsp,xmm4_off*wordSize));
    __ movdbl(xmm5,Address(rsp,xmm5_off*wordSize));
    __ movdbl(xmm6,Address(rsp,xmm6_off*wordSize));
    __ movdbl(xmm7,Address(rsp,xmm7_off*wordSize));
  }
  __ pop_FPU_state();
  __ addptr(rsp, FPU_regs_live*sizeof(jdouble)); // Pop FPU registers

  __ popf();
  __ popa();
  // Get the rbp, described implicitly by the frame sender code (no oopMap)
  __ pop(rbp);

}

void RegisterSaver::restore_result_registers(MacroAssembler* masm) {

  // Just restore result register. Only used by deoptimization. By
  // now any callee save register that needs to be restore to a c2
  // caller of the deoptee has been extracted into the vframeArray
  // and will be stuffed into the c2i adapter we create for later
  // restoration so only result registers need to be restored here.
  //

  __ frstor(Address(rsp, 0));      // Restore fpu state

  // Recover XMM & FPU state
  if( UseSSE == 1 ) {
    __ movflt(xmm0, Address(rsp, xmm0_off*wordSize));
  } else if( UseSSE >= 2 ) {
    __ movdbl(xmm0, Address(rsp, xmm0_off*wordSize));
  }
  __ movptr(rax, Address(rsp, rax_off*wordSize));
  __ movptr(rdx, Address(rsp, rdx_off*wordSize));
  // Pop all of the register save are off the stack except the return address
  __ addptr(rsp, return_off * wordSize);
}

// The java_calling_convention describes stack locations as ideal slots on
// a frame with no abi restrictions. Since we must observe abi restrictions
// (like the placement of the register window) the slots must be biased by
// the following value.
static int reg2offset_in(VMReg r) {
  // Account for saved rbp, and return address
  // This should really be in_preserve_stack_slots
  return (r->reg2stack() + 2) * VMRegImpl::stack_slot_size;
}

static int reg2offset_out(VMReg r) {
  return (r->reg2stack() + SharedRuntime::out_preserve_stack_slots()) * VMRegImpl::stack_slot_size;
}

// ---------------------------------------------------------------------------
// Read the array of BasicTypes from a signature, and compute where the
// arguments should go.  Values in the VMRegPair regs array refer to 4-byte
// quantities.  Values less than SharedInfo::stack0 are registers, those above
// refer to 4-byte stack slots.  All stack slots are based off of the stack pointer
// as framesizes are fixed.
// VMRegImpl::stack0 refers to the first slot 0(sp).
// and VMRegImpl::stack0+1 refers to the memory word 4-byes higher.  Register
// up to RegisterImpl::number_of_registers) are the 32-bit
// integer registers.

// Pass first two oop/int args in registers ECX and EDX.
// Pass first two float/double args in registers XMM0 and XMM1.
// Doubles have precedence, so if you pass a mix of floats and doubles
// the doubles will grab the registers before the floats will.

// Note: the INPUTS in sig_bt are in units of Java argument words, which are
// either 32-bit or 64-bit depending on the build.  The OUTPUTS are in 32-bit
// units regardless of build. Of course for i486 there is no 64 bit build


// ---------------------------------------------------------------------------
// The compiled Java calling convention.
// Pass first two oop/int args in registers ECX and EDX.
// Pass first two float/double args in registers XMM0 and XMM1.
// Doubles have precedence, so if you pass a mix of floats and doubles
// the doubles will grab the registers before the floats will.
int SharedRuntime::java_calling_convention(const BasicType *sig_bt,
                                           VMRegPair *regs,
                                           int total_args_passed,
                                           int is_outgoing) {
  uint    stack = 0;          // Starting stack position for args on stack


  // Pass first two oop/int args in registers ECX and EDX.
  uint reg_arg0 = 9999;
  uint reg_arg1 = 9999;

  // Pass first two float/double args in registers XMM0 and XMM1.
  // Doubles have precedence, so if you pass a mix of floats and doubles
  // the doubles will grab the registers before the floats will.
  // CNC - TURNED OFF FOR non-SSE.
  //       On Intel we have to round all doubles (and most floats) at
  //       call sites by storing to the stack in any case.
  // UseSSE=0 ==> Don't Use ==> 9999+0
  // UseSSE=1 ==> Floats only ==> 9999+1
  // UseSSE>=2 ==> Floats or doubles ==> 9999+2
  enum { fltarg_dontuse = 9999+0, fltarg_float_only = 9999+1, fltarg_flt_dbl = 9999+2 };
  uint fargs = (UseSSE>=2) ? 2 : UseSSE;
  uint freg_arg0 = 9999+fargs;
  uint freg_arg1 = 9999+fargs;

  // Pass doubles & longs aligned on the stack.  First count stack slots for doubles
  int i;
  for( i = 0; i < total_args_passed; i++) {
    if( sig_bt[i] == T_DOUBLE ) {
      // first 2 doubles go in registers
      if( freg_arg0 == fltarg_flt_dbl ) freg_arg0 = i;
      else if( freg_arg1 == fltarg_flt_dbl ) freg_arg1 = i;
      else // Else double is passed low on the stack to be aligned.
        stack += 2;
    } else if( sig_bt[i] == T_LONG ) {
      stack += 2;
    }
  }
  int dstack = 0;             // Separate counter for placing doubles

  // Now pick where all else goes.
  for( i = 0; i < total_args_passed; i++) {
    // From the type and the argument number (count) compute the location
    switch( sig_bt[i] ) {
    case T_SHORT:
    case T_CHAR:
    case T_BYTE:
    case T_BOOLEAN:
    case T_INT:
    case T_ARRAY:
    case T_OBJECT:
    case T_ADDRESS:
      if( reg_arg0 == 9999 )  {
        reg_arg0 = i;
        regs[i].set1(rcx->as_VMReg());
      } else if( reg_arg1 == 9999 )  {
        reg_arg1 = i;
        regs[i].set1(rdx->as_VMReg());
      } else {
        regs[i].set1(VMRegImpl::stack2reg(stack++));
      }
      break;
    case T_FLOAT:
      if( freg_arg0 == fltarg_flt_dbl || freg_arg0 == fltarg_float_only ) {
        freg_arg0 = i;
        regs[i].set1(xmm0->as_VMReg());
      } else if( freg_arg1 == fltarg_flt_dbl || freg_arg1 == fltarg_float_only ) {
        freg_arg1 = i;
        regs[i].set1(xmm1->as_VMReg());
      } else {
        regs[i].set1(VMRegImpl::stack2reg(stack++));
      }
      break;
    case T_LONG:
      assert(sig_bt[i+1] == T_VOID, "missing Half" );
      regs[i].set2(VMRegImpl::stack2reg(dstack));
      dstack += 2;
      break;
    case T_DOUBLE:
      assert(sig_bt[i+1] == T_VOID, "missing Half" );
      if( freg_arg0 == (uint)i ) {
        regs[i].set2(xmm0->as_VMReg());
      } else if( freg_arg1 == (uint)i ) {
        regs[i].set2(xmm1->as_VMReg());
      } else {
        regs[i].set2(VMRegImpl::stack2reg(dstack));
        dstack += 2;
      }
      break;
    case T_VOID: regs[i].set_bad(); break;
      break;
    default:
      ShouldNotReachHere();
      break;
    }
  }

  // return value can be odd number of VMRegImpl stack slots make multiple of 2
  return round_to(stack, 2);
}

// Patch the callers callsite with entry to compiled code if it exists.
static void patch_callers_callsite(MacroAssembler *masm) {
  Label L;
  __ verify_oop(rbx);
  __ cmpptr(Address(rbx, in_bytes(methodOopDesc::code_offset())), (int32_t)NULL_WORD);
  __ jcc(Assembler::equal, L);
  // Schedule the branch target address early.
  // Call into the VM to patch the caller, then jump to compiled callee
  // rax, isn't live so capture return address while we easily can
  __ movptr(rax, Address(rsp, 0));
  __ pusha();
  __ pushf();

  if (UseSSE == 1) {
    __ subptr(rsp, 2*wordSize);
    __ movflt(Address(rsp, 0), xmm0);
    __ movflt(Address(rsp, wordSize), xmm1);
  }
  if (UseSSE >= 2) {
    __ subptr(rsp, 4*wordSize);
    __ movdbl(Address(rsp, 0), xmm0);
    __ movdbl(Address(rsp, 2*wordSize), xmm1);
  }
#ifdef COMPILER2
  // C2 may leave the stack dirty if not in SSE2+ mode
  if (UseSSE >= 2) {
    __ verify_FPU(0, "c2i transition should have clean FPU stack");
  } else {
    __ empty_FPU_stack();
  }
#endif /* COMPILER2 */

  // VM needs caller's callsite
  __ push(rax);
  // VM needs target method
  __ push(rbx);
  __ verify_oop(rbx);
  __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::fixup_callers_callsite)));
  __ addptr(rsp, 2*wordSize);

  if (UseSSE == 1) {
    __ movflt(xmm0, Address(rsp, 0));
    __ movflt(xmm1, Address(rsp, wordSize));
    __ addptr(rsp, 2*wordSize);
  }
  if (UseSSE >= 2) {
    __ movdbl(xmm0, Address(rsp, 0));
    __ movdbl(xmm1, Address(rsp, 2*wordSize));
    __ addptr(rsp, 4*wordSize);
  }

  __ popf();
  __ popa();
  __ bind(L);
}


// Helper function to put tags in interpreter stack.
static void  tag_stack(MacroAssembler *masm, const BasicType sig, int st_off) {
  if (TaggedStackInterpreter) {
    int tag_offset = st_off + Interpreter::expr_tag_offset_in_bytes(0);
    if (sig == T_OBJECT || sig == T_ARRAY) {
      __ movptr(Address(rsp, tag_offset), frame::TagReference);
    } else if (sig == T_LONG || sig == T_DOUBLE) {
      int next_tag_offset = st_off + Interpreter::expr_tag_offset_in_bytes(1);
      __ movptr(Address(rsp, next_tag_offset), frame::TagValue);
      __ movptr(Address(rsp, tag_offset), frame::TagValue);
    } else {
      __ movptr(Address(rsp, tag_offset), frame::TagValue);
    }
  }
}

// Double and long values with Tagged stacks are not contiguous.
static void move_c2i_double(MacroAssembler *masm, XMMRegister r, int st_off) {
  int next_off = st_off - Interpreter::stackElementSize();
  if (TaggedStackInterpreter) {
   __ movdbl(Address(rsp, next_off), r);
   // Move top half up and put tag in the middle.
   __ movl(rdi, Address(rsp, next_off+wordSize));
   __ movl(Address(rsp, st_off), rdi);
   tag_stack(masm, T_DOUBLE, next_off);
  } else {
   __ movdbl(Address(rsp, next_off), r);
  }
}

static void gen_c2i_adapter(MacroAssembler *masm,
                            int total_args_passed,
                            int comp_args_on_stack,
                            const BasicType *sig_bt,
                            const VMRegPair *regs,
                            Label& skip_fixup) {
  // Before we get into the guts of the C2I adapter, see if we should be here
  // at all.  We've come from compiled code and are attempting to jump to the
  // interpreter, which means the caller made a static call to get here
  // (vcalls always get a compiled target if there is one).  Check for a
  // compiled target.  If there is one, we need to patch the caller's call.
  patch_callers_callsite(masm);

  __ bind(skip_fixup);

#ifdef COMPILER2
  // C2 may leave the stack dirty if not in SSE2+ mode
  if (UseSSE >= 2) {
    __ verify_FPU(0, "c2i transition should have clean FPU stack");
  } else {
    __ empty_FPU_stack();
  }
#endif /* COMPILER2 */

  // Since all args are passed on the stack, total_args_passed * interpreter_
  // stack_element_size  is the
  // space we need.
  int extraspace = total_args_passed * Interpreter::stackElementSize();

  // Get return address
  __ pop(rax);

  // set senderSP value
  __ movptr(rsi, rsp);

  __ subptr(rsp, extraspace);

  // Now write the args into the outgoing interpreter space
  for (int i = 0; i < total_args_passed; i++) {
    if (sig_bt[i] == T_VOID) {
      assert(i > 0 && (sig_bt[i-1] == T_LONG || sig_bt[i-1] == T_DOUBLE), "missing half");
      continue;
    }

    // st_off points to lowest address on stack.
    int st_off = ((total_args_passed - 1) - i) * Interpreter::stackElementSize();
    int next_off = st_off - Interpreter::stackElementSize();

    // Say 4 args:
    // i   st_off
    // 0   12 T_LONG
    // 1    8 T_VOID
    // 2    4 T_OBJECT
    // 3    0 T_BOOL
    VMReg r_1 = regs[i].first();
    VMReg r_2 = regs[i].second();
    if (!r_1->is_valid()) {
      assert(!r_2->is_valid(), "");
      continue;
    }

    if (r_1->is_stack()) {
      // memory to memory use fpu stack top
      int ld_off = r_1->reg2stack() * VMRegImpl::stack_slot_size + extraspace;

      if (!r_2->is_valid()) {
        __ movl(rdi, Address(rsp, ld_off));
        __ movptr(Address(rsp, st_off), rdi);
        tag_stack(masm, sig_bt[i], st_off);
      } else {

        // ld_off == LSW, ld_off+VMRegImpl::stack_slot_size == MSW
        // st_off == MSW, st_off-wordSize == LSW

        __ movptr(rdi, Address(rsp, ld_off));
        __ movptr(Address(rsp, next_off), rdi);
#ifndef _LP64
        __ movptr(rdi, Address(rsp, ld_off + wordSize));
        __ movptr(Address(rsp, st_off), rdi);
#else
#ifdef ASSERT
        // Overwrite the unused slot with known junk
        __ mov64(rax, CONST64(0xdeadffffdeadaaaa));
        __ movptr(Address(rsp, st_off), rax);
#endif /* ASSERT */
#endif // _LP64
        tag_stack(masm, sig_bt[i], next_off);
      }
    } else if (r_1->is_Register()) {
      Register r = r_1->as_Register();
      if (!r_2->is_valid()) {
        __ movl(Address(rsp, st_off), r);
        tag_stack(masm, sig_bt[i], st_off);
      } else {
        // long/double in gpr
        NOT_LP64(ShouldNotReachHere());
        // Two VMRegs can be T_OBJECT, T_ADDRESS, T_DOUBLE, T_LONG
        // T_DOUBLE and T_LONG use two slots in the interpreter
        if ( sig_bt[i] == T_LONG || sig_bt[i] == T_DOUBLE) {
          // long/double in gpr
#ifdef ASSERT
          // Overwrite the unused slot with known junk
          LP64_ONLY(__ mov64(rax, CONST64(0xdeadffffdeadaaab)));
          __ movptr(Address(rsp, st_off), rax);
#endif /* ASSERT */
          __ movptr(Address(rsp, next_off), r);
          tag_stack(masm, sig_bt[i], next_off);
        } else {
          __ movptr(Address(rsp, st_off), r);
          tag_stack(masm, sig_bt[i], st_off);
        }
      }
    } else {
      assert(r_1->is_XMMRegister(), "");
      if (!r_2->is_valid()) {
        __ movflt(Address(rsp, st_off), r_1->as_XMMRegister());
        tag_stack(masm, sig_bt[i], st_off);
      } else {
        assert(sig_bt[i] == T_DOUBLE || sig_bt[i] == T_LONG, "wrong type");
        move_c2i_double(masm, r_1->as_XMMRegister(), st_off);
      }
    }
  }

  // Schedule the branch target address early.
  __ movptr(rcx, Address(rbx, in_bytes(methodOopDesc::interpreter_entry_offset())));
  // And repush original return address
  __ push(rax);
  __ jmp(rcx);
}


// For tagged stacks, double or long value aren't contiguous on the stack
// so get them contiguous for the xmm load
static void move_i2c_double(MacroAssembler *masm, XMMRegister r, Register saved_sp, int ld_off) {
  int next_val_off = ld_off - Interpreter::stackElementSize();
  if (TaggedStackInterpreter) {
    // use tag slot temporarily for MSW
    __ movptr(rsi, Address(saved_sp, ld_off));
    __ movptr(Address(saved_sp, next_val_off+wordSize), rsi);
    __ movdbl(r, Address(saved_sp, next_val_off));
    // restore tag
    __ movptr(Address(saved_sp, next_val_off+wordSize), frame::TagValue);
  } else {
    __ movdbl(r, Address(saved_sp, next_val_off));
  }
}

static void gen_i2c_adapter(MacroAssembler *masm,
                            int total_args_passed,
                            int comp_args_on_stack,
                            const BasicType *sig_bt,
                            const VMRegPair *regs) {
  // we're being called from the interpreter but need to find the
  // compiled return entry point.  The return address on the stack
  // should point at it and we just need to pull the old value out.
  // load up the pointer to the compiled return entry point and
  // rewrite our return pc. The code is arranged like so:
  //
  // .word Interpreter::return_sentinel
  // .word address_of_compiled_return_point
  // return_entry_point: blah_blah_blah
  //
  // So we can find the appropriate return point by loading up the word
  // just prior to the current return address we have on the stack.
  //
  // We will only enter here from an interpreted frame and never from after
  // passing thru a c2i. Azul allowed this but we do not. If we lose the
  // race and use a c2i we will remain interpreted for the race loser(s).
  // This removes all sorts of headaches on the x86 side and also eliminates
  // the possibility of having c2i -> i2c -> c2i -> ... endless transitions.


  // Note: rsi contains the senderSP on entry. We must preserve it since
  // we may do a i2c -> c2i transition if we lose a race where compiled
  // code goes non-entrant while we get args ready.

  // Pick up the return address
  __ movptr(rax, Address(rsp, 0));

  // If UseSSE >= 2 then no cleanup is needed on the return to the
  // interpreter so skip fixing up the return entry point unless
  // VerifyFPU is enabled.
  if (UseSSE < 2 || VerifyFPU) {
    Label skip, chk_int;
    // If we were called from the call stub we need to do a little bit different
    // cleanup than if the interpreter returned to the call stub.

    ExternalAddress stub_return_address(StubRoutines::_call_stub_return_address);
    __ cmpptr(rax, stub_return_address.addr());
    __ jcc(Assembler::notEqual, chk_int);
    assert(StubRoutines::x86::get_call_stub_compiled_return() != NULL, "must be set");
    __ lea(rax, ExternalAddress(StubRoutines::x86::get_call_stub_compiled_return()));
    __ jmp(skip);

    // It must be the interpreter since we never get here via a c2i (unlike Azul)

    __ bind(chk_int);
#ifdef ASSERT
    {
      Label ok;
      __ cmpl(Address(rax, -2*wordSize), Interpreter::return_sentinel);
      __ jcc(Assembler::equal, ok);
      __ int3();
      __ bind(ok);
    }
#endif // ASSERT
    __ movptr(rax, Address(rax, -wordSize));
    __ bind(skip);
  }

  // rax, now contains the compiled return entry point which will do an
  // cleanup needed for the return from compiled to interpreted.

  // Must preserve original SP for loading incoming arguments because
  // we need to align the outgoing SP for compiled code.
  __ movptr(rdi, rsp);

  // Cut-out for having no stack args.  Since up to 2 int/oop args are passed
  // in registers, we will occasionally have no stack args.
  int comp_words_on_stack = 0;
  if (comp_args_on_stack) {
    // Sig words on the stack are greater-than VMRegImpl::stack0.  Those in
    // registers are below.  By subtracting stack0, we either get a negative
    // number (all values in registers) or the maximum stack slot accessed.
    // int comp_args_on_stack = VMRegImpl::reg2stack(max_arg);
    // Convert 4-byte stack slots to words.
    comp_words_on_stack = round_to(comp_args_on_stack*4, wordSize)>>LogBytesPerWord;
    // Round up to miminum stack alignment, in wordSize
    comp_words_on_stack = round_to(comp_words_on_stack, 2);
    __ subptr(rsp, comp_words_on_stack * wordSize);
  }

  // Align the outgoing SP
  __ andptr(rsp, -(StackAlignmentInBytes));

  // push the return address on the stack (note that pushing, rather
  // than storing it, yields the correct frame alignment for the callee)
  __ push(rax);

  // Put saved SP in another register
  const Register saved_sp = rax;
  __ movptr(saved_sp, rdi);


  // Will jump to the compiled code just as if compiled code was doing it.
  // Pre-load the register-jump target early, to schedule it better.
  __ movptr(rdi, Address(rbx, in_bytes(methodOopDesc::from_compiled_offset())));

  // Now generate the shuffle code.  Pick up all register args and move the
  // rest through the floating point stack top.
  for (int i = 0; i < total_args_passed; i++) {
    if (sig_bt[i] == T_VOID) {
      // Longs and doubles are passed in native word order, but misaligned
      // in the 32-bit build.
      assert(i > 0 && (sig_bt[i-1] == T_LONG || sig_bt[i-1] == T_DOUBLE), "missing half");
      continue;
    }

    // Pick up 0, 1 or 2 words from SP+offset.

    assert(!regs[i].second()->is_valid() || regs[i].first()->next() == regs[i].second(),
            "scrambled load targets?");
    // Load in argument order going down.
    int ld_off = (total_args_passed - i)*Interpreter::stackElementSize() + Interpreter::value_offset_in_bytes();
    // Point to interpreter value (vs. tag)
    int next_off = ld_off - Interpreter::stackElementSize();
    //
    //
    //
    VMReg r_1 = regs[i].first();
    VMReg r_2 = regs[i].second();
    if (!r_1->is_valid()) {
      assert(!r_2->is_valid(), "");
      continue;
    }
    if (r_1->is_stack()) {
      // Convert stack slot to an SP offset (+ wordSize to account for return address )
      int st_off = regs[i].first()->reg2stack()*VMRegImpl::stack_slot_size + wordSize;

      // We can use rsi as a temp here because compiled code doesn't need rsi as an input
      // and if we end up going thru a c2i because of a miss a reasonable value of rsi
      // we be generated.
      if (!r_2->is_valid()) {
        // __ fld_s(Address(saved_sp, ld_off));
        // __ fstp_s(Address(rsp, st_off));
        __ movl(rsi, Address(saved_sp, ld_off));
        __ movptr(Address(rsp, st_off), rsi);
      } else {
        // Interpreter local[n] == MSW, local[n+1] == LSW however locals
        // are accessed as negative so LSW is at LOW address

        // ld_off is MSW so get LSW
        // st_off is LSW (i.e. reg.first())
        // __ fld_d(Address(saved_sp, next_off));
        // __ fstp_d(Address(rsp, st_off));
        //
        // We are using two VMRegs. This can be either T_OBJECT, T_ADDRESS, T_LONG, or T_DOUBLE
        // the interpreter allocates two slots but only uses one for thr T_LONG or T_DOUBLE case
        // So we must adjust where to pick up the data to match the interpreter.
        //
        // Interpreter local[n] == MSW, local[n+1] == LSW however locals
        // are accessed as negative so LSW is at LOW address

        // ld_off is MSW so get LSW
        const int offset = (NOT_LP64(true ||) sig_bt[i]==T_LONG||sig_bt[i]==T_DOUBLE)?
                           next_off : ld_off;
        __ movptr(rsi, Address(saved_sp, offset));
        __ movptr(Address(rsp, st_off), rsi);
#ifndef _LP64
        __ movptr(rsi, Address(saved_sp, ld_off));
        __ movptr(Address(rsp, st_off + wordSize), rsi);
#endif // _LP64
      }
    } else if (r_1->is_Register()) {  // Register argument
      Register r = r_1->as_Register();
      assert(r != rax, "must be different");
      if (r_2->is_valid()) {
        //
        // We are using two VMRegs. This can be either T_OBJECT, T_ADDRESS, T_LONG, or T_DOUBLE
        // the interpreter allocates two slots but only uses one for thr T_LONG or T_DOUBLE case
        // So we must adjust where to pick up the data to match the interpreter.

        const int offset = (NOT_LP64(true ||) sig_bt[i]==T_LONG||sig_bt[i]==T_DOUBLE)?
                           next_off : ld_off;

        // this can be a misaligned move
        __ movptr(r, Address(saved_sp, offset));
#ifndef _LP64
        assert(r_2->as_Register() != rax, "need another temporary register");
        // Remember r_1 is low address (and LSB on x86)
        // So r_2 gets loaded from high address regardless of the platform
        __ movptr(r_2->as_Register(), Address(saved_sp, ld_off));
#endif // _LP64
      } else {
        __ movl(r, Address(saved_sp, ld_off));
      }
    } else {
      assert(r_1->is_XMMRegister(), "");
      if (!r_2->is_valid()) {
        __ movflt(r_1->as_XMMRegister(), Address(saved_sp, ld_off));
      } else {
        move_i2c_double(masm, r_1->as_XMMRegister(), saved_sp, ld_off);
      }
    }
  }

  // 6243940 We might end up in handle_wrong_method if
  // the callee is deoptimized as we race thru here. If that
  // happens we don't want to take a safepoint because the
  // caller frame will look interpreted and arguments are now
  // "compiled" so it is much better to make this transition
  // invisible to the stack walking code. Unfortunately if
  // we try and find the callee by normal means a safepoint
  // is possible. So we stash the desired callee in the thread
  // and the vm will find there should this case occur.

  __ get_thread(rax);
  __ movptr(Address(rax, JavaThread::callee_target_offset()), rbx);

  // move methodOop to rax, in case we end up in an c2i adapter.
  // the c2i adapters expect methodOop in rax, (c2) because c2's
  // resolve stubs return the result (the method) in rax,.
  // I'd love to fix this.
  __ mov(rax, rbx);

  __ jmp(rdi);
}

// ---------------------------------------------------------------
AdapterHandlerEntry* SharedRuntime::generate_i2c2i_adapters(MacroAssembler *masm,
                                                            int total_args_passed,
                                                            int comp_args_on_stack,
                                                            const BasicType *sig_bt,
                                                            const VMRegPair *regs) {
  address i2c_entry = __ pc();

  gen_i2c_adapter(masm, total_args_passed, comp_args_on_stack, sig_bt, regs);

  // -------------------------------------------------------------------------
  // Generate a C2I adapter.  On entry we know rbx, holds the methodOop during calls
  // to the interpreter.  The args start out packed in the compiled layout.  They
  // need to be unpacked into the interpreter layout.  This will almost always
  // require some stack space.  We grow the current (compiled) stack, then repack
  // the args.  We  finally end in a jump to the generic interpreter entry point.
  // On exit from the interpreter, the interpreter will restore our SP (lest the
  // compiled code, which relys solely on SP and not EBP, get sick).

  address c2i_unverified_entry = __ pc();
  Label skip_fixup;

  Register holder = rax;
  Register receiver = rcx;
  Register temp = rbx;

  {

    Label missed;

    __ verify_oop(holder);
    __ movptr(temp, Address(receiver, oopDesc::klass_offset_in_bytes()));
    __ verify_oop(temp);

    __ cmpptr(temp, Address(holder, compiledICHolderOopDesc::holder_klass_offset()));
    __ movptr(rbx, Address(holder, compiledICHolderOopDesc::holder_method_offset()));
    __ jcc(Assembler::notEqual, missed);
    // Method might have been compiled since the call site was patched to
    // interpreted if that is the case treat it as a miss so we can get
    // the call site corrected.
    __ cmpptr(Address(rbx, in_bytes(methodOopDesc::code_offset())), (int32_t)NULL_WORD);
    __ jcc(Assembler::equal, skip_fixup);

    __ bind(missed);
    __ jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub()));
  }

  address c2i_entry = __ pc();

  gen_c2i_adapter(masm, total_args_passed, comp_args_on_stack, sig_bt, regs, skip_fixup);

  __ flush();
  return new AdapterHandlerEntry(i2c_entry, c2i_entry, c2i_unverified_entry);
}

int SharedRuntime::c_calling_convention(const BasicType *sig_bt,
                                         VMRegPair *regs,
                                         int total_args_passed) {
// We return the amount of VMRegImpl stack slots we need to reserve for all
// the arguments NOT counting out_preserve_stack_slots.

  uint    stack = 0;        // All arguments on stack

  for( int i = 0; i < total_args_passed; i++) {
    // From the type and the argument number (count) compute the location
    switch( sig_bt[i] ) {
    case T_BOOLEAN:
    case T_CHAR:
    case T_FLOAT:
    case T_BYTE:
    case T_SHORT:
    case T_INT:
    case T_OBJECT:
    case T_ARRAY:
    case T_ADDRESS:
      regs[i].set1(VMRegImpl::stack2reg(stack++));
      break;
    case T_LONG:
    case T_DOUBLE: // The stack numbering is reversed from Java
      // Since C arguments do not get reversed, the ordering for
      // doubles on the stack must be opposite the Java convention
      assert(sig_bt[i+1] == T_VOID, "missing Half" );
      regs[i].set2(VMRegImpl::stack2reg(stack));
      stack += 2;
      break;
    case T_VOID: regs[i].set_bad(); break;
    default:
      ShouldNotReachHere();
      break;
    }
  }
  return stack;
}

// A simple move of integer like type
static void simple_move32(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
  if (src.first()->is_stack()) {
    if (dst.first()->is_stack()) {
      // stack to stack
      // __ ld(FP, reg2offset(src.first()) + STACK_BIAS, L5);
      // __ st(L5, SP, reg2offset(dst.first()) + STACK_BIAS);
      __ movl2ptr(rax, Address(rbp, reg2offset_in(src.first())));
      __ movptr(Address(rsp, reg2offset_out(dst.first())), rax);
    } else {
      // stack to reg
      __ movl2ptr(dst.first()->as_Register(),  Address(rbp, reg2offset_in(src.first())));
    }
  } else if (dst.first()->is_stack()) {
    // reg to stack
    // no need to sign extend on 64bit
    __ movptr(Address(rsp, reg2offset_out(dst.first())), src.first()->as_Register());
  } else {
    if (dst.first() != src.first()) {
      __ mov(dst.first()->as_Register(), src.first()->as_Register());
    }
  }
}

// An oop arg. Must pass a handle not the oop itself
static void object_move(MacroAssembler* masm,
                        OopMap* map,
                        int oop_handle_offset,
                        int framesize_in_slots,
                        VMRegPair src,
                        VMRegPair dst,
                        bool is_receiver,
                        int* receiver_offset) {

  // Because of the calling conventions we know that src can be a
  // register or a stack location. dst can only be a stack location.

  assert(dst.first()->is_stack(), "must be stack");
  // must pass a handle. First figure out the location we use as a handle

  if (src.first()->is_stack()) {
    // Oop is already on the stack as an argument
    Register rHandle = rax;
    Label nil;
    __ xorptr(rHandle, rHandle);
    __ cmpptr(Address(rbp, reg2offset_in(src.first())), (int32_t)NULL_WORD);
    __ jcc(Assembler::equal, nil);
    __ lea(rHandle, Address(rbp, reg2offset_in(src.first())));
    __ bind(nil);
    __ movptr(Address(rsp, reg2offset_out(dst.first())), rHandle);

    int offset_in_older_frame = src.first()->reg2stack() + SharedRuntime::out_preserve_stack_slots();
    map->set_oop(VMRegImpl::stack2reg(offset_in_older_frame + framesize_in_slots));
    if (is_receiver) {
      *receiver_offset = (offset_in_older_frame + framesize_in_slots) * VMRegImpl::stack_slot_size;
    }
  } else {
    // Oop is in an a register we must store it to the space we reserve
    // on the stack for oop_handles
    const Register rOop = src.first()->as_Register();
    const Register rHandle = rax;
    int oop_slot = (rOop == rcx ? 0 : 1) * VMRegImpl::slots_per_word + oop_handle_offset;
    int offset = oop_slot*VMRegImpl::stack_slot_size;
    Label skip;
    __ movptr(Address(rsp, offset), rOop);
    map->set_oop(VMRegImpl::stack2reg(oop_slot));
    __ xorptr(rHandle, rHandle);
    __ cmpptr(rOop, (int32_t)NULL_WORD);
    __ jcc(Assembler::equal, skip);
    __ lea(rHandle, Address(rsp, offset));
    __ bind(skip);
    // Store the handle parameter
    __ movptr(Address(rsp, reg2offset_out(dst.first())), rHandle);
    if (is_receiver) {
      *receiver_offset = offset;
    }
  }
}

// A float arg may have to do float reg int reg conversion
static void float_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
  assert(!src.second()->is_valid() && !dst.second()->is_valid(), "bad float_move");

  // Because of the calling convention we know that src is either a stack location
  // or an xmm register. dst can only be a stack location.

  assert(dst.first()->is_stack() && ( src.first()->is_stack() || src.first()->is_XMMRegister()), "bad parameters");

  if (src.first()->is_stack()) {
    __ movl(rax, Address(rbp, reg2offset_in(src.first())));
    __ movptr(Address(rsp, reg2offset_out(dst.first())), rax);
  } else {
    // reg to stack
    __ movflt(Address(rsp, reg2offset_out(dst.first())), src.first()->as_XMMRegister());
  }
}

// A long move
static void long_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {

  // The only legal possibility for a long_move VMRegPair is:
  // 1: two stack slots (possibly unaligned)
  // as neither the java  or C calling convention will use registers
  // for longs.

  if (src.first()->is_stack() && dst.first()->is_stack()) {
    assert(src.second()->is_stack() && dst.second()->is_stack(), "must be all stack");
    __ movptr(rax, Address(rbp, reg2offset_in(src.first())));
    NOT_LP64(__ movptr(rbx, Address(rbp, reg2offset_in(src.second()))));
    __ movptr(Address(rsp, reg2offset_out(dst.first())), rax);
    NOT_LP64(__ movptr(Address(rsp, reg2offset_out(dst.second())), rbx));
  } else {
    ShouldNotReachHere();
  }
}

// A double move
static void double_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {

  // The only legal possibilities for a double_move VMRegPair are:
  // The painful thing here is that like long_move a VMRegPair might be

  // Because of the calling convention we know that src is either
  //   1: a single physical register (xmm registers only)
  //   2: two stack slots (possibly unaligned)
  // dst can only be a pair of stack slots.

  assert(dst.first()->is_stack() && (src.first()->is_XMMRegister() || src.first()->is_stack()), "bad args");

  if (src.first()->is_stack()) {
    // source is all stack
    __ movptr(rax, Address(rbp, reg2offset_in(src.first())));
    NOT_LP64(__ movptr(rbx, Address(rbp, reg2offset_in(src.second()))));
    __ movptr(Address(rsp, reg2offset_out(dst.first())), rax);
    NOT_LP64(__ movptr(Address(rsp, reg2offset_out(dst.second())), rbx));
  } else {
    // reg to stack
    // No worries about stack alignment
    __ movdbl(Address(rsp, reg2offset_out(dst.first())), src.first()->as_XMMRegister());
  }
}


void SharedRuntime::save_native_result(MacroAssembler *masm, BasicType ret_type, int frame_slots) {
  // We always ignore the frame_slots arg and just use the space just below frame pointer
  // which by this time is free to use
  switch (ret_type) {
  case T_FLOAT:
    __ fstp_s(Address(rbp, -wordSize));
    break;
  case T_DOUBLE:
    __ fstp_d(Address(rbp, -2*wordSize));
    break;
  case T_VOID:  break;
  case T_LONG:
    __ movptr(Address(rbp, -wordSize), rax);
    NOT_LP64(__ movptr(Address(rbp, -2*wordSize), rdx));
    break;
  default: {
    __ movptr(Address(rbp, -wordSize), rax);
    }
  }
}

void SharedRuntime::restore_native_result(MacroAssembler *masm, BasicType ret_type, int frame_slots) {
  // We always ignore the frame_slots arg and just use the space just below frame pointer
  // which by this time is free to use
  switch (ret_type) {
  case T_FLOAT:
    __ fld_s(Address(rbp, -wordSize));
    break;
  case T_DOUBLE:
    __ fld_d(Address(rbp, -2*wordSize));
    break;
  case T_LONG:
    __ movptr(rax, Address(rbp, -wordSize));
    NOT_LP64(__ movptr(rdx, Address(rbp, -2*wordSize)));
    break;
  case T_VOID:  break;
  default: {
    __ movptr(rax, Address(rbp, -wordSize));
    }
  }
}

// ---------------------------------------------------------------------------
// Generate a native wrapper for a given method.  The method takes arguments
// in the Java compiled code convention, marshals them to the native
// convention (handlizes oops, etc), transitions to native, makes the call,
// returns to java state (possibly blocking), unhandlizes any result and
// returns.
nmethod *SharedRuntime::generate_native_wrapper(MacroAssembler *masm,
                                                methodHandle method,
                                                int total_in_args,
                                                int comp_args_on_stack,
                                                BasicType *in_sig_bt,
                                                VMRegPair *in_regs,
                                                BasicType ret_type) {

  // An OopMap for lock (and class if static)
  OopMapSet *oop_maps = new OopMapSet();

  // We have received a description of where all the java arg are located
  // on entry to the wrapper. We need to convert these args to where
  // the jni function will expect them. To figure out where they go
  // we convert the java signature to a C signature by inserting
  // the hidden arguments as arg[0] and possibly arg[1] (static method)

  int total_c_args = total_in_args + 1;
  if (method->is_static()) {
    total_c_args++;
  }

  BasicType* out_sig_bt = NEW_RESOURCE_ARRAY(BasicType, total_c_args);
  VMRegPair* out_regs   = NEW_RESOURCE_ARRAY(VMRegPair,   total_c_args);

  int argc = 0;
  out_sig_bt[argc++] = T_ADDRESS;
  if (method->is_static()) {
    out_sig_bt[argc++] = T_OBJECT;
  }

  int i;
  for (i = 0; i < total_in_args ; i++ ) {
    out_sig_bt[argc++] = in_sig_bt[i];
  }


  // Now figure out where the args must be stored and how much stack space
  // they require (neglecting out_preserve_stack_slots but space for storing
  // the 1st six register arguments). It's weird see int_stk_helper.
  //
  int out_arg_slots;
  out_arg_slots = c_calling_convention(out_sig_bt, out_regs, total_c_args);

  // Compute framesize for the wrapper.  We need to handlize all oops in
  // registers a max of 2 on x86.

  // Calculate the total number of stack slots we will need.

  // First count the abi requirement plus all of the outgoing args
  int stack_slots = SharedRuntime::out_preserve_stack_slots() + out_arg_slots;

  // Now the space for the inbound oop handle area

  int oop_handle_offset = stack_slots;
  stack_slots += 2*VMRegImpl::slots_per_word;

  // Now any space we need for handlizing a klass if static method

  int klass_slot_offset = 0;
  int klass_offset = -1;
  int lock_slot_offset = 0;
  bool is_static = false;
  int oop_temp_slot_offset = 0;

  if (method->is_static()) {
    klass_slot_offset = stack_slots;
    stack_slots += VMRegImpl::slots_per_word;
    klass_offset = klass_slot_offset * VMRegImpl::stack_slot_size;
    is_static = true;
  }

  // Plus a lock if needed

  if (method->is_synchronized()) {
    lock_slot_offset = stack_slots;
    stack_slots += VMRegImpl::slots_per_word;
  }

  // Now a place (+2) to save return values or temp during shuffling
  // + 2 for return address (which we own) and saved rbp,
  stack_slots += 4;

  // Ok The space we have allocated will look like:
  //
  //
  // FP-> |                     |
  //      |---------------------|
  //      | 2 slots for moves   |
  //      |---------------------|
  //      | lock box (if sync)  |
  //      |---------------------| <- lock_slot_offset  (-lock_slot_rbp_offset)
  //      | klass (if static)   |
  //      |---------------------| <- klass_slot_offset
  //      | oopHandle area      |
  //      |---------------------| <- oop_handle_offset (a max of 2 registers)
  //      | outbound memory     |
  //      | based arguments     |
  //      |                     |
  //      |---------------------|
  //      |                     |
  // SP-> | out_preserved_slots |
  //
  //
  // ****************************************************************************
  // WARNING - on Windows Java Natives use pascal calling convention and pop the
  // arguments off of the stack after the jni call. Before the call we can use
  // instructions that are SP relative. After the jni call we switch to FP
  // relative instructions instead of re-adjusting the stack on windows.
  // ****************************************************************************


  // Now compute actual number of stack words we need rounding to make
  // stack properly aligned.
  stack_slots = round_to(stack_slots, StackAlignmentInSlots);

  int stack_size = stack_slots * VMRegImpl::stack_slot_size;

  intptr_t start = (intptr_t)__ pc();

  // First thing make an ic check to see if we should even be here

  // We are free to use all registers as temps without saving them and
  // restoring them except rbp,. rbp, is the only callee save register
  // as far as the interpreter and the compiler(s) are concerned.


  const Register ic_reg = rax;
  const Register receiver = rcx;
  Label hit;
  Label exception_pending;


  __ verify_oop(receiver);
  __ cmpptr(ic_reg, Address(receiver, oopDesc::klass_offset_in_bytes()));
  __ jcc(Assembler::equal, hit);

  __ jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub()));

  // verified entry must be aligned for code patching.
  // and the first 5 bytes must be in the same cache line
  // if we align at 8 then we will be sure 5 bytes are in the same line
  __ align(8);

  __ bind(hit);

  int vep_offset = ((intptr_t)__ pc()) - start;

#ifdef COMPILER1
  if (InlineObjectHash && method->intrinsic_id() == vmIntrinsics::_hashCode) {
    // Object.hashCode can pull the hashCode from the header word
    // instead of doing a full VM transition once it's been computed.
    // Since hashCode is usually polymorphic at call sites we can't do
    // this optimization at the call site without a lot of work.
    Label slowCase;
    Register receiver = rcx;
    Register result = rax;
    __ movptr(result, Address(receiver, oopDesc::mark_offset_in_bytes()));

    // check if locked
    __ testptr(result, markOopDesc::unlocked_value);
    __ jcc (Assembler::zero, slowCase);

    if (UseBiasedLocking) {
      // Check if biased and fall through to runtime if so
      __ testptr(result, markOopDesc::biased_lock_bit_in_place);
      __ jcc (Assembler::notZero, slowCase);
    }

    // get hash
    __ andptr(result, markOopDesc::hash_mask_in_place);
    // test if hashCode exists
    __ jcc  (Assembler::zero, slowCase);
    __ shrptr(result, markOopDesc::hash_shift);
    __ ret(0);
    __ bind (slowCase);
  }
#endif // COMPILER1

  // The instruction at the verified entry point must be 5 bytes or longer
  // because it can be patched on the fly by make_non_entrant. The stack bang
  // instruction fits that requirement.

  // Generate stack overflow check

  if (UseStackBanging) {
    __ bang_stack_with_offset(StackShadowPages*os::vm_page_size());
  } else {
    // need a 5 byte instruction to allow MT safe patching to non-entrant
    __ fat_nop();
  }

  // Generate a new frame for the wrapper.
  __ enter();
  // -2 because return address is already present and so is saved rbp,
  __ subptr(rsp, stack_size - 2*wordSize);

  // Frame is now completed as far a size and linkage.

  int frame_complete = ((intptr_t)__ pc()) - start;

  // Calculate the difference between rsp and rbp,. We need to know it
  // after the native call because on windows Java Natives will pop
  // the arguments and it is painful to do rsp relative addressing
  // in a platform independent way. So after the call we switch to
  // rbp, relative addressing.

  int fp_adjustment = stack_size - 2*wordSize;

#ifdef COMPILER2
  // C2 may leave the stack dirty if not in SSE2+ mode
  if (UseSSE >= 2) {
    __ verify_FPU(0, "c2i transition should have clean FPU stack");
  } else {
    __ empty_FPU_stack();
  }
#endif /* COMPILER2 */

  // Compute the rbp, offset for any slots used after the jni call

  int lock_slot_rbp_offset = (lock_slot_offset*VMRegImpl::stack_slot_size) - fp_adjustment;
  int oop_temp_slot_rbp_offset = (oop_temp_slot_offset*VMRegImpl::stack_slot_size) - fp_adjustment;

  // We use rdi as a thread pointer because it is callee save and
  // if we load it once it is usable thru the entire wrapper
  const Register thread = rdi;

  // We use rsi as the oop handle for the receiver/klass
  // It is callee save so it survives the call to native

  const Register oop_handle_reg = rsi;

  __ get_thread(thread);


  //
  // We immediately shuffle the arguments so that any vm call we have to
  // make from here on out (sync slow path, jvmti, etc.) we will have
  // captured the oops from our caller and have a valid oopMap for
  // them.

  // -----------------
  // The Grand Shuffle
  //
  // Natives require 1 or 2 extra arguments over the normal ones: the JNIEnv*
  // and, if static, the class mirror instead of a receiver.  This pretty much
  // guarantees that register layout will not match (and x86 doesn't use reg
  // parms though amd does).  Since the native abi doesn't use register args
  // and the java conventions does we don't have to worry about collisions.
  // All of our moved are reg->stack or stack->stack.
  // We ignore the extra arguments during the shuffle and handle them at the
  // last moment. The shuffle is described by the two calling convention
  // vectors we have in our possession. We simply walk the java vector to
  // get the source locations and the c vector to get the destinations.

  int c_arg = method->is_static() ? 2 : 1 ;

  // Record rsp-based slot for receiver on stack for non-static methods
  int receiver_offset = -1;

  // This is a trick. We double the stack slots so we can claim
  // the oops in the caller's frame. Since we are sure to have
  // more args than the caller doubling is enough to make
  // sure we can capture all the incoming oop args from the
  // caller.
  //
  OopMap* map = new OopMap(stack_slots * 2, 0 /* arg_slots*/);

  // Mark location of rbp,
  // map->set_callee_saved(VMRegImpl::stack2reg( stack_slots - 2), stack_slots * 2, 0, rbp->as_VMReg());

  // We know that we only have args in at most two integer registers (rcx, rdx). So rax, rbx
  // Are free to temporaries if we have to do  stack to steck moves.
  // All inbound args are referenced based on rbp, and all outbound args via rsp.

  for (i = 0; i < total_in_args ; i++, c_arg++ ) {
    switch (in_sig_bt[i]) {
      case T_ARRAY:
      case T_OBJECT:
        object_move(masm, map, oop_handle_offset, stack_slots, in_regs[i], out_regs[c_arg],
                    ((i == 0) && (!is_static)),
                    &receiver_offset);
        break;
      case T_VOID:
        break;

      case T_FLOAT:
        float_move(masm, in_regs[i], out_regs[c_arg]);
          break;

      case T_DOUBLE:
        assert( i + 1 < total_in_args &&
                in_sig_bt[i + 1] == T_VOID &&
                out_sig_bt[c_arg+1] == T_VOID, "bad arg list");
        double_move(masm, in_regs[i], out_regs[c_arg]);
        break;

      case T_LONG :
        long_move(masm, in_regs[i], out_regs[c_arg]);
        break;

      case T_ADDRESS: assert(false, "found T_ADDRESS in java args");

      default:
        simple_move32(masm, in_regs[i], out_regs[c_arg]);
    }
  }

  // Pre-load a static method's oop into rsi.  Used both by locking code and
  // the normal JNI call code.
  if (method->is_static()) {

    //  load opp into a register
    __ movoop(oop_handle_reg, JNIHandles::make_local(Klass::cast(method->method_holder())->java_mirror()));

    // Now handlize the static class mirror it's known not-null.
    __ movptr(Address(rsp, klass_offset), oop_handle_reg);
    map->set_oop(VMRegImpl::stack2reg(klass_slot_offset));

    // Now get the handle
    __ lea(oop_handle_reg, Address(rsp, klass_offset));
    // store the klass handle as second argument
    __ movptr(Address(rsp, wordSize), oop_handle_reg);
  }

  // Change state to native (we save the return address in the thread, since it might not
  // be pushed on the stack when we do a a stack traversal). It is enough that the pc()
  // points into the right code segment. It does not have to be the correct return pc.
  // We use the same pc/oopMap repeatedly when we call out

  intptr_t the_pc = (intptr_t) __ pc();
  oop_maps->add_gc_map(the_pc - start, map);

  __ set_last_Java_frame(thread, rsp, noreg, (address)the_pc);


  // We have all of the arguments setup at this point. We must not touch any register
  // argument registers at this point (what if we save/restore them there are no oop?

  {
    SkipIfEqual skip_if(masm, &DTraceMethodProbes, 0);
    __ movoop(rax, JNIHandles::make_local(method()));
    __ call_VM_leaf(
         CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry),
         thread, rax);
  }


  // These are register definitions we need for locking/unlocking
  const Register swap_reg = rax;  // Must use rax, for cmpxchg instruction
  const Register obj_reg  = rcx;  // Will contain the oop
  const Register lock_reg = rdx;  // Address of compiler lock object (BasicLock)

  Label slow_path_lock;
  Label lock_done;

  // Lock a synchronized method
  if (method->is_synchronized()) {


    const int mark_word_offset = BasicLock::displaced_header_offset_in_bytes();

    // Get the handle (the 2nd argument)
    __ movptr(oop_handle_reg, Address(rsp, wordSize));

    // Get address of the box

    __ lea(lock_reg, Address(rbp, lock_slot_rbp_offset));

    // Load the oop from the handle
    __ movptr(obj_reg, Address(oop_handle_reg, 0));

    if (UseBiasedLocking) {
      // Note that oop_handle_reg is trashed during this call
      __ biased_locking_enter(lock_reg, obj_reg, swap_reg, oop_handle_reg, false, lock_done, &slow_path_lock);
    }

    // Load immediate 1 into swap_reg %rax,
    __ movptr(swap_reg, 1);

    // Load (object->mark() | 1) into swap_reg %rax,
    __ orptr(swap_reg, Address(obj_reg, 0));

    // Save (object->mark() | 1) into BasicLock's displaced header
    __ movptr(Address(lock_reg, mark_word_offset), swap_reg);

    if (os::is_MP()) {
      __ lock();
    }

    // src -> dest iff dest == rax, else rax, <- dest
    // *obj_reg = lock_reg iff *obj_reg == rax, else rax, = *(obj_reg)
    __ cmpxchgptr(lock_reg, Address(obj_reg, 0));
    __ jcc(Assembler::equal, lock_done);

    // Test if the oopMark is an obvious stack pointer, i.e.,
    //  1) (mark & 3) == 0, and
    //  2) rsp <= mark < mark + os::pagesize()
    // These 3 tests can be done by evaluating the following
    // expression: ((mark - rsp) & (3 - os::vm_page_size())),
    // assuming both stack pointer and pagesize have their
    // least significant 2 bits clear.
    // NOTE: the oopMark is in swap_reg %rax, as the result of cmpxchg

    __ subptr(swap_reg, rsp);
    __ andptr(swap_reg, 3 - os::vm_page_size());

    // Save the test result, for recursive case, the result is zero
    __ movptr(Address(lock_reg, mark_word_offset), swap_reg);
    __ jcc(Assembler::notEqual, slow_path_lock);
    // Slow path will re-enter here
    __ bind(lock_done);

    if (UseBiasedLocking) {
      // Re-fetch oop_handle_reg as we trashed it above
      __ movptr(oop_handle_reg, Address(rsp, wordSize));
    }
  }


  // Finally just about ready to make the JNI call


  // get JNIEnv* which is first argument to native

  __ lea(rdx, Address(thread, in_bytes(JavaThread::jni_environment_offset())));
  __ movptr(Address(rsp, 0), rdx);

  // Now set thread in native
  __ movl(Address(thread, JavaThread::thread_state_offset()), _thread_in_native);

  __ call(RuntimeAddress(method->native_function()));

  // WARNING - on Windows Java Natives use pascal calling convention and pop the
  // arguments off of the stack. We could just re-adjust the stack pointer here
  // and continue to do SP relative addressing but we instead switch to FP
  // relative addressing.

  // Unpack native results.
  switch (ret_type) {
  case T_BOOLEAN: __ c2bool(rax);            break;
  case T_CHAR   : __ andptr(rax, 0xFFFF);    break;
  case T_BYTE   : __ sign_extend_byte (rax); break;
  case T_SHORT  : __ sign_extend_short(rax); break;
  case T_INT    : /* nothing to do */        break;
  case T_DOUBLE :
  case T_FLOAT  :
    // Result is in st0 we'll save as needed
    break;
  case T_ARRAY:                 // Really a handle
  case T_OBJECT:                // Really a handle
      break; // can't de-handlize until after safepoint check
  case T_VOID: break;
  case T_LONG: break;
  default       : ShouldNotReachHere();
  }

  // Switch thread to "native transition" state before reading the synchronization state.
  // This additional state is necessary because reading and testing the synchronization
  // state is not atomic w.r.t. GC, as this scenario demonstrates:
  //     Java thread A, in _thread_in_native state, loads _not_synchronized and is preempted.
  //     VM thread changes sync state to synchronizing and suspends threads for GC.
  //     Thread A is resumed to finish this native method, but doesn't block here since it
  //     didn't see any synchronization is progress, and escapes.
  __ movl(Address(thread, JavaThread::thread_state_offset()), _thread_in_native_trans);

  if(os::is_MP()) {
    if (UseMembar) {
      // Force this write out before the read below
      __ membar(Assembler::Membar_mask_bits(
           Assembler::LoadLoad | Assembler::LoadStore |
           Assembler::StoreLoad | Assembler::StoreStore));
    } else {
      // Write serialization page so VM thread can do a pseudo remote membar.
      // We use the current thread pointer to calculate a thread specific
      // offset to write to within the page. This minimizes bus traffic
      // due to cache line collision.
      __ serialize_memory(thread, rcx);
    }
  }

  if (AlwaysRestoreFPU) {
    // Make sure the control word is correct.
    __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std()));
  }

  // check for safepoint operation in progress and/or pending suspend requests
  { Label Continue;

    __ cmp32(ExternalAddress((address)SafepointSynchronize::address_of_state()),
             SafepointSynchronize::_not_synchronized);

    Label L;
    __ jcc(Assembler::notEqual, L);
    __ cmpl(Address(thread, JavaThread::suspend_flags_offset()), 0);
    __ jcc(Assembler::equal, Continue);
    __ bind(L);

    // Don't use call_VM as it will see a possible pending exception and forward it
    // and never return here preventing us from clearing _last_native_pc down below.
    // Also can't use call_VM_leaf either as it will check to see if rsi & rdi are
    // preserved and correspond to the bcp/locals pointers. So we do a runtime call
    // by hand.
    //
    save_native_result(masm, ret_type, stack_slots);
    __ push(thread);
    __ call(RuntimeAddress(CAST_FROM_FN_PTR(address,
                                            JavaThread::check_special_condition_for_native_trans)));
    __ increment(rsp, wordSize);
    // Restore any method result value
    restore_native_result(masm, ret_type, stack_slots);

    __ bind(Continue);
  }

  // change thread state
  __ movl(Address(thread, JavaThread::thread_state_offset()), _thread_in_Java);

  Label reguard;
  Label reguard_done;
  __ cmpl(Address(thread, JavaThread::stack_guard_state_offset()), JavaThread::stack_guard_yellow_disabled);
  __ jcc(Assembler::equal, reguard);

  // slow path reguard  re-enters here
  __ bind(reguard_done);

  // Handle possible exception (will unlock if necessary)

  // native result if any is live

  // Unlock
  Label slow_path_unlock;
  Label unlock_done;
  if (method->is_synchronized()) {

    Label done;

    // Get locked oop from the handle we passed to jni
    __ movptr(obj_reg, Address(oop_handle_reg, 0));

    if (UseBiasedLocking) {
      __ biased_locking_exit(obj_reg, rbx, done);
    }

    // Simple recursive lock?

    __ cmpptr(Address(rbp, lock_slot_rbp_offset), (int32_t)NULL_WORD);
    __ jcc(Assembler::equal, done);

    // Must save rax, if if it is live now because cmpxchg must use it
    if (ret_type != T_FLOAT && ret_type != T_DOUBLE && ret_type != T_VOID) {
      save_native_result(masm, ret_type, stack_slots);
    }

    //  get old displaced header
    __ movptr(rbx, Address(rbp, lock_slot_rbp_offset));

    // get address of the stack lock
    __ lea(rax, Address(rbp, lock_slot_rbp_offset));

    // Atomic swap old header if oop still contains the stack lock
    if (os::is_MP()) {
    __ lock();
    }

    // src -> dest iff dest == rax, else rax, <- dest
    // *obj_reg = rbx, iff *obj_reg == rax, else rax, = *(obj_reg)
    __ cmpxchgptr(rbx, Address(obj_reg, 0));
    __ jcc(Assembler::notEqual, slow_path_unlock);

    // slow path re-enters here
    __ bind(unlock_done);
    if (ret_type != T_FLOAT && ret_type != T_DOUBLE && ret_type != T_VOID) {
      restore_native_result(masm, ret_type, stack_slots);
    }

    __ bind(done);

  }

  {
    SkipIfEqual skip_if(masm, &DTraceMethodProbes, 0);
    // Tell dtrace about this method exit
    save_native_result(masm, ret_type, stack_slots);
    __ movoop(rax, JNIHandles::make_local(method()));
    __ call_VM_leaf(
         CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit),
         thread, rax);
    restore_native_result(masm, ret_type, stack_slots);
  }

  // We can finally stop using that last_Java_frame we setup ages ago

  __ reset_last_Java_frame(thread, false, true);

  // Unpack oop result
  if (ret_type == T_OBJECT || ret_type == T_ARRAY) {
      Label L;
      __ cmpptr(rax, (int32_t)NULL_WORD);
      __ jcc(Assembler::equal, L);
      __ movptr(rax, Address(rax, 0));
      __ bind(L);
      __ verify_oop(rax);
  }

  // reset handle block
  __ movptr(rcx, Address(thread, JavaThread::active_handles_offset()));

  __ movptr(Address(rcx, JNIHandleBlock::top_offset_in_bytes()), NULL_WORD);

  // Any exception pending?
  __ cmpptr(Address(thread, in_bytes(Thread::pending_exception_offset())), (int32_t)NULL_WORD);
  __ jcc(Assembler::notEqual, exception_pending);


  // no exception, we're almost done

  // check that only result value is on FPU stack
  __ verify_FPU(ret_type == T_FLOAT || ret_type == T_DOUBLE ? 1 : 0, "native_wrapper normal exit");

  // Fixup floating pointer results so that result looks like a return from a compiled method
  if (ret_type == T_FLOAT) {
    if (UseSSE >= 1) {
      // Pop st0 and store as float and reload into xmm register
      __ fstp_s(Address(rbp, -4));
      __ movflt(xmm0, Address(rbp, -4));
    }
  } else if (ret_type == T_DOUBLE) {
    if (UseSSE >= 2) {
      // Pop st0 and store as double and reload into xmm register
      __ fstp_d(Address(rbp, -8));
      __ movdbl(xmm0, Address(rbp, -8));
    }
  }

  // Return

  __ leave();
  __ ret(0);

  // Unexpected paths are out of line and go here

  // Slow path locking & unlocking
  if (method->is_synchronized()) {

    // BEGIN Slow path lock

    __ bind(slow_path_lock);

    // has last_Java_frame setup. No exceptions so do vanilla call not call_VM
    // args are (oop obj, BasicLock* lock, JavaThread* thread)
    __ push(thread);
    __ push(lock_reg);
    __ push(obj_reg);
    __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::complete_monitor_locking_C)));
    __ addptr(rsp, 3*wordSize);

#ifdef ASSERT
    { Label L;
    __ cmpptr(Address(thread, in_bytes(Thread::pending_exception_offset())), (int)NULL_WORD);
    __ jcc(Assembler::equal, L);
    __ stop("no pending exception allowed on exit from monitorenter");
    __ bind(L);
    }
#endif
    __ jmp(lock_done);

    // END Slow path lock

    // BEGIN Slow path unlock
    __ bind(slow_path_unlock);

    // Slow path unlock

    if (ret_type == T_FLOAT || ret_type == T_DOUBLE ) {
      save_native_result(masm, ret_type, stack_slots);
    }
    // Save pending exception around call to VM (which contains an EXCEPTION_MARK)

    __ pushptr(Address(thread, in_bytes(Thread::pending_exception_offset())));
    __ movptr(Address(thread, in_bytes(Thread::pending_exception_offset())), NULL_WORD);


    // should be a peal
    // +wordSize because of the push above
    __ lea(rax, Address(rbp, lock_slot_rbp_offset));
    __ push(rax);

    __ push(obj_reg);
    __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::complete_monitor_unlocking_C)));
    __ addptr(rsp, 2*wordSize);
#ifdef ASSERT
    {
      Label L;
      __ cmpptr(Address(thread, in_bytes(Thread::pending_exception_offset())), (int32_t)NULL_WORD);
      __ jcc(Assembler::equal, L);
      __ stop("no pending exception allowed on exit complete_monitor_unlocking_C");
      __ bind(L);
    }
#endif /* ASSERT */

    __ popptr(Address(thread, in_bytes(Thread::pending_exception_offset())));

    if (ret_type == T_FLOAT || ret_type == T_DOUBLE ) {
      restore_native_result(masm, ret_type, stack_slots);
    }
    __ jmp(unlock_done);
    // END Slow path unlock

  }

  // SLOW PATH Reguard the stack if needed

  __ bind(reguard);
  save_native_result(masm, ret_type, stack_slots);
  {
    __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::reguard_yellow_pages)));
  }
  restore_native_result(masm, ret_type, stack_slots);
  __ jmp(reguard_done);


  // BEGIN EXCEPTION PROCESSING

  // Forward  the exception
  __ bind(exception_pending);

  // remove possible return value from FPU register stack
  __ empty_FPU_stack();

  // pop our frame
  __ leave();
  // and forward the exception
  __ jump(RuntimeAddress(StubRoutines::forward_exception_entry()));

  __ flush();

  nmethod *nm = nmethod::new_native_nmethod(method,
                                            masm->code(),
                                            vep_offset,
                                            frame_complete,
                                            stack_slots / VMRegImpl::slots_per_word,
                                            (is_static ? in_ByteSize(klass_offset) : in_ByteSize(receiver_offset)),
                                            in_ByteSize(lock_slot_offset*VMRegImpl::stack_slot_size),
                                            oop_maps);
  return nm;

}

#ifdef HAVE_DTRACE_H
// ---------------------------------------------------------------------------
// Generate a dtrace nmethod for a given signature.  The method takes arguments
// in the Java compiled code convention, marshals them to the native
// abi and then leaves nops at the position you would expect to call a native
// function. When the probe is enabled the nops are replaced with a trap
// instruction that dtrace inserts and the trace will cause a notification
// to dtrace.
//
// The probes are only able to take primitive types and java/lang/String as
// arguments.  No other java types are allowed. Strings are converted to utf8
// strings so that from dtrace point of view java strings are converted to C
// strings. There is an arbitrary fixed limit on the total space that a method
// can use for converting the strings. (256 chars per string in the signature).
// So any java string larger then this is truncated.

nmethod *SharedRuntime::generate_dtrace_nmethod(
    MacroAssembler *masm, methodHandle method) {

  // generate_dtrace_nmethod is guarded by a mutex so we are sure to
  // be single threaded in this method.
  assert(AdapterHandlerLibrary_lock->owned_by_self(), "must be");

  // Fill in the signature array, for the calling-convention call.
  int total_args_passed = method->size_of_parameters();

  BasicType* in_sig_bt  = NEW_RESOURCE_ARRAY(BasicType, total_args_passed);
  VMRegPair  *in_regs   = NEW_RESOURCE_ARRAY(VMRegPair, total_args_passed);

  // The signature we are going to use for the trap that dtrace will see
  // java/lang/String is converted. We drop "this" and any other object
  // is converted to NULL.  (A one-slot java/lang/Long object reference
  // is converted to a two-slot long, which is why we double the allocation).
  BasicType* out_sig_bt = NEW_RESOURCE_ARRAY(BasicType, total_args_passed * 2);
  VMRegPair* out_regs   = NEW_RESOURCE_ARRAY(VMRegPair, total_args_passed * 2);

  int i=0;
  int total_strings = 0;
  int first_arg_to_pass = 0;
  int total_c_args = 0;

  if( !method->is_static() ) {  // Pass in receiver first
    in_sig_bt[i++] = T_OBJECT;
    first_arg_to_pass = 1;
  }

  // We need to convert the java args to where a native (non-jni) function
  // would expect them. To figure out where they go we convert the java
  // signature to a C signature.

  SignatureStream ss(method->signature());
  for ( ; !ss.at_return_type(); ss.next()) {
    BasicType bt = ss.type();
    in_sig_bt[i++] = bt;  // Collect remaining bits of signature
    out_sig_bt[total_c_args++] = bt;
    if( bt == T_OBJECT) {
      symbolOop s = ss.as_symbol_or_null();
      if (s == vmSymbols::java_lang_String()) {
        total_strings++;
        out_sig_bt[total_c_args-1] = T_ADDRESS;
      } else if (s == vmSymbols::java_lang_Boolean() ||
                 s == vmSymbols::java_lang_Character() ||
                 s == vmSymbols::java_lang_Byte() ||
                 s == vmSymbols::java_lang_Short() ||
                 s == vmSymbols::java_lang_Integer() ||
                 s == vmSymbols::java_lang_Float()) {
        out_sig_bt[total_c_args-1] = T_INT;
      } else if (s == vmSymbols::java_lang_Long() ||
                 s == vmSymbols::java_lang_Double()) {
        out_sig_bt[total_c_args-1] = T_LONG;
        out_sig_bt[total_c_args++] = T_VOID;
      }
    } else if ( bt == T_LONG || bt == T_DOUBLE ) {
      in_sig_bt[i++] = T_VOID;   // Longs & doubles take 2 Java slots
      out_sig_bt[total_c_args++] = T_VOID;
    }
  }

  assert(i==total_args_passed, "validly parsed signature");

  // Now get the compiled-Java layout as input arguments
  int comp_args_on_stack;
  comp_args_on_stack = SharedRuntime::java_calling_convention(
      in_sig_bt, in_regs, total_args_passed, false);

  // Now figure out where the args must be stored and how much stack space
  // they require (neglecting out_preserve_stack_slots).

  int out_arg_slots;
  out_arg_slots = c_calling_convention(out_sig_bt, out_regs, total_c_args);

  // Calculate the total number of stack slots we will need.

  // First count the abi requirement plus all of the outgoing args
  int stack_slots = SharedRuntime::out_preserve_stack_slots() + out_arg_slots;

  // Now space for the string(s) we must convert

  int* string_locs   = NEW_RESOURCE_ARRAY(int, total_strings + 1);
  for (i = 0; i < total_strings ; i++) {
    string_locs[i] = stack_slots;
    stack_slots += max_dtrace_string_size / VMRegImpl::stack_slot_size;
  }

  // + 2 for return address (which we own) and saved rbp,

  stack_slots += 2;

  // Ok The space we have allocated will look like:
  //
  //
  // FP-> |                     |
  //      |---------------------|
  //      | string[n]           |
  //      |---------------------| <- string_locs[n]
  //      | string[n-1]         |
  //      |---------------------| <- string_locs[n-1]
  //      | ...                 |
  //      | ...                 |
  //      |---------------------| <- string_locs[1]
  //      | string[0]           |
  //      |---------------------| <- string_locs[0]
  //      | outbound memory     |
  //      | based arguments     |
  //      |                     |
  //      |---------------------|
  //      |                     |
  // SP-> | out_preserved_slots |
  //
  //

  // Now compute actual number of stack words we need rounding to make
  // stack properly aligned.
  stack_slots = round_to(stack_slots, 2 * VMRegImpl::slots_per_word);

  int stack_size = stack_slots * VMRegImpl::stack_slot_size;

  intptr_t start = (intptr_t)__ pc();

  // First thing make an ic check to see if we should even be here

  // We are free to use all registers as temps without saving them and
  // restoring them except rbp. rbp, is the only callee save register
  // as far as the interpreter and the compiler(s) are concerned.

  const Register ic_reg = rax;
  const Register receiver = rcx;
  Label hit;
  Label exception_pending;


  __ verify_oop(receiver);
  __ cmpl(ic_reg, Address(receiver, oopDesc::klass_offset_in_bytes()));
  __ jcc(Assembler::equal, hit);

  __ jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub()));

  // verified entry must be aligned for code patching.
  // and the first 5 bytes must be in the same cache line
  // if we align at 8 then we will be sure 5 bytes are in the same line
  __ align(8);

  __ bind(hit);

  int vep_offset = ((intptr_t)__ pc()) - start;


  // The instruction at the verified entry point must be 5 bytes or longer
  // because it can be patched on the fly by make_non_entrant. The stack bang
  // instruction fits that requirement.

  // Generate stack overflow check


  if (UseStackBanging) {
    if (stack_size <= StackShadowPages*os::vm_page_size()) {
      __ bang_stack_with_offset(StackShadowPages*os::vm_page_size());
    } else {
      __ movl(rax, stack_size);
      __ bang_stack_size(rax, rbx);
    }
  } else {
    // need a 5 byte instruction to allow MT safe patching to non-entrant
    __ fat_nop();
  }

  assert(((int)__ pc() - start - vep_offset) >= 5,
         "valid size for make_non_entrant");

  // Generate a new frame for the wrapper.
  __ enter();

  // -2 because return address is already present and so is saved rbp,
  if (stack_size - 2*wordSize != 0) {
    __ subl(rsp, stack_size - 2*wordSize);
  }

  // Frame is now completed as far a size and linkage.

  int frame_complete = ((intptr_t)__ pc()) - start;

  // First thing we do store all the args as if we are doing the call.
  // Since the C calling convention is stack based that ensures that
  // all the Java register args are stored before we need to convert any
  // string we might have.

  int sid = 0;
  int c_arg, j_arg;
  int string_reg = 0;

  for (j_arg = first_arg_to_pass, c_arg = 0 ;
       j_arg < total_args_passed ; j_arg++, c_arg++ ) {

    VMRegPair src = in_regs[j_arg];
    VMRegPair dst = out_regs[c_arg];
    assert(dst.first()->is_stack() || in_sig_bt[j_arg] == T_VOID,
           "stack based abi assumed");

    switch (in_sig_bt[j_arg]) {

      case T_ARRAY:
      case T_OBJECT:
        if (out_sig_bt[c_arg] == T_ADDRESS) {
          // Any register based arg for a java string after the first
          // will be destroyed by the call to get_utf so we store
          // the original value in the location the utf string address
          // will eventually be stored.
          if (src.first()->is_reg()) {
            if (string_reg++ != 0) {
              simple_move32(masm, src, dst);
            }
          }
        } else if (out_sig_bt[c_arg] == T_INT || out_sig_bt[c_arg] == T_LONG) {
          // need to unbox a one-word value
          Register in_reg = rax;
          if ( src.first()->is_reg() ) {
            in_reg = src.first()->as_Register();
          } else {
            simple_move32(masm, src, in_reg->as_VMReg());
          }
          Label skipUnbox;
          __ movl(Address(rsp, reg2offset_out(dst.first())), NULL_WORD);
          if ( out_sig_bt[c_arg] == T_LONG ) {
            __ movl(Address(rsp, reg2offset_out(dst.second())), NULL_WORD);
          }
          __ testl(in_reg, in_reg);
          __ jcc(Assembler::zero, skipUnbox);
          assert(dst.first()->is_stack() &&
                 (!dst.second()->is_valid() || dst.second()->is_stack()),
                 "value(s) must go into stack slots");

          BasicType bt = out_sig_bt[c_arg];
          int box_offset = java_lang_boxing_object::value_offset_in_bytes(bt);
          if ( bt == T_LONG ) {
            __ movl(rbx, Address(in_reg,
                                 box_offset + VMRegImpl::stack_slot_size));
            __ movl(Address(rsp, reg2offset_out(dst.second())), rbx);
          }
          __ movl(in_reg,  Address(in_reg, box_offset));
          __ movl(Address(rsp, reg2offset_out(dst.first())), in_reg);
          __ bind(skipUnbox);
        } else {
          // Convert the arg to NULL
          __ movl(Address(rsp, reg2offset_out(dst.first())), NULL_WORD);
        }
        if (out_sig_bt[c_arg] == T_LONG) {
          assert(out_sig_bt[c_arg+1] == T_VOID, "must be");
          ++c_arg; // Move over the T_VOID To keep the loop indices in sync
        }
        break;

      case T_VOID:
        break;

      case T_FLOAT:
        float_move(masm, src, dst);
        break;

      case T_DOUBLE:
        assert( j_arg + 1 < total_args_passed &&
                in_sig_bt[j_arg + 1] == T_VOID, "bad arg list");
        double_move(masm, src, dst);
        break;

      case T_LONG :
        long_move(masm, src, dst);
        break;

      case T_ADDRESS: assert(false, "found T_ADDRESS in java args");

      default:
        simple_move32(masm, src, dst);
    }
  }

  // Now we must convert any string we have to utf8
  //

  for (sid = 0, j_arg = first_arg_to_pass, c_arg = 0 ;
       sid < total_strings ; j_arg++, c_arg++ ) {

    if (out_sig_bt[c_arg] == T_ADDRESS) {

      Address utf8_addr = Address(
          rsp, string_locs[sid++] * VMRegImpl::stack_slot_size);
      __ leal(rax, utf8_addr);

      // The first string we find might still be in the original java arg
      // register
      VMReg orig_loc = in_regs[j_arg].first();
      Register string_oop;

      // This is where the argument will eventually reside
      Address dest = Address(rsp, reg2offset_out(out_regs[c_arg].first()));

      if (sid == 1 && orig_loc->is_reg()) {
        string_oop = orig_loc->as_Register();
        assert(string_oop != rax, "smashed arg");
      } else {

        if (orig_loc->is_reg()) {
          // Get the copy of the jls object
          __ movl(rcx, dest);
        } else {
          // arg is still in the original location
          __ movl(rcx, Address(rbp, reg2offset_in(orig_loc)));
        }
        string_oop = rcx;

      }
      Label nullString;
      __ movl(dest, NULL_WORD);
      __ testl(string_oop, string_oop);
      __ jcc(Assembler::zero, nullString);

      // Now we can store the address of the utf string as the argument
      __ movl(dest, rax);

      // And do the conversion
      __ call_VM_leaf(CAST_FROM_FN_PTR(
             address, SharedRuntime::get_utf), string_oop, rax);
      __ bind(nullString);
    }

    if (in_sig_bt[j_arg] == T_OBJECT && out_sig_bt[c_arg] == T_LONG) {
      assert(out_sig_bt[c_arg+1] == T_VOID, "must be");
      ++c_arg; // Move over the T_VOID To keep the loop indices in sync
    }
  }


  // Ok now we are done. Need to place the nop that dtrace wants in order to
  // patch in the trap

  int patch_offset = ((intptr_t)__ pc()) - start;

  __ nop();


  // Return

  __ leave();
  __ ret(0);

  __ flush();

  nmethod *nm = nmethod::new_dtrace_nmethod(
      method, masm->code(), vep_offset, patch_offset, frame_complete,
      stack_slots / VMRegImpl::slots_per_word);
  return nm;

}

#endif // HAVE_DTRACE_H

// this function returns the adjust size (in number of words) to a c2i adapter
// activation for use during deoptimization
int Deoptimization::last_frame_adjust(int callee_parameters, int callee_locals ) {
  return (callee_locals - callee_parameters) * Interpreter::stackElementWords();
}


uint SharedRuntime::out_preserve_stack_slots() {
  return 0;
}


//------------------------------generate_deopt_blob----------------------------
void SharedRuntime::generate_deopt_blob() {
  // allocate space for the code
  ResourceMark rm;
  // setup code generation tools
  CodeBuffer   buffer("deopt_blob", 1024, 1024);
  MacroAssembler* masm = new MacroAssembler(&buffer);
  int frame_size_in_words;
  OopMap* map = NULL;
  // Account for the extra args we place on the stack
  // by the time we call fetch_unroll_info
  const int additional_words = 2; // deopt kind, thread

  OopMapSet *oop_maps = new OopMapSet();

  // -------------
  // This code enters when returning to a de-optimized nmethod.  A return
  // address has been pushed on the the stack, and return values are in
  // registers.
  // If we are doing a normal deopt then we were called from the patched
  // nmethod from the point we returned to the nmethod. So the return
  // address on the stack is wrong by NativeCall::instruction_size
  // We will adjust the value to it looks like we have the original return
  // address on the stack (like when we eagerly deoptimized).
  // In the case of an exception pending with deoptimized then we enter
  // with a return address on the stack that points after the call we patched
  // into the exception handler. We have the following register state:
  //    rax,: exception
  //    rbx,: exception handler
  //    rdx: throwing pc
  // So in this case we simply jam rdx into the useless return address and
  // the stack looks just like we want.
  //
  // At this point we need to de-opt.  We save the argument return
  // registers.  We call the first C routine, fetch_unroll_info().  This
  // routine captures the return values and returns a structure which
  // describes the current frame size and the sizes of all replacement frames.
  // The current frame is compiled code and may contain many inlined
  // functions, each with their own JVM state.  We pop the current frame, then
  // push all the new frames.  Then we call the C routine unpack_frames() to
  // populate these frames.  Finally unpack_frames() returns us the new target
  // address.  Notice that callee-save registers are BLOWN here; they have
  // already been captured in the vframeArray at the time the return PC was
  // patched.
  address start = __ pc();
  Label cont;

  // Prolog for non exception case!

  // Save everything in sight.

  map = RegisterSaver::save_live_registers(masm, additional_words, &frame_size_in_words);
  // Normal deoptimization
  __ push(Deoptimization::Unpack_deopt);
  __ jmp(cont);

  int reexecute_offset = __ pc() - start;

  // Reexecute case
  // return address is the pc describes what bci to do re-execute at

  // No need to update map as each call to save_live_registers will produce identical oopmap
  (void) RegisterSaver::save_live_registers(masm, additional_words, &frame_size_in_words);

  __ push(Deoptimization::Unpack_reexecute);
  __ jmp(cont);

  int exception_offset = __ pc() - start;

  // Prolog for exception case

  // all registers are dead at this entry point, except for rax, and
  // rdx which contain the exception oop and exception pc
  // respectively.  Set them in TLS and fall thru to the
  // unpack_with_exception_in_tls entry point.

  __ get_thread(rdi);
  __ movptr(Address(rdi, JavaThread::exception_pc_offset()), rdx);
  __ movptr(Address(rdi, JavaThread::exception_oop_offset()), rax);

  int exception_in_tls_offset = __ pc() - start;

  // new implementation because exception oop is now passed in JavaThread

  // Prolog for exception case
  // All registers must be preserved because they might be used by LinearScan
  // Exceptiop oop and throwing PC are passed in JavaThread
  // tos: stack at point of call to method that threw the exception (i.e. only
  // args are on the stack, no return address)

  // make room on stack for the return address
  // It will be patched later with the throwing pc. The correct value is not
  // available now because loading it from memory would destroy registers.
  __ push(0);

  // Save everything in sight.

  // No need to update map as each call to save_live_registers will produce identical oopmap
  (void) RegisterSaver::save_live_registers(masm, additional_words, &frame_size_in_words);

  // Now it is safe to overwrite any register

  // store the correct deoptimization type
  __ push(Deoptimization::Unpack_exception);

  // load throwing pc from JavaThread and patch it as the return address
  // of the current frame. Then clear the field in JavaThread
  __ get_thread(rdi);
  __ movptr(rdx, Address(rdi, JavaThread::exception_pc_offset()));
  __ movptr(Address(rbp, wordSize), rdx);
  __ movptr(Address(rdi, JavaThread::exception_pc_offset()), NULL_WORD);

#ifdef ASSERT
  // verify that there is really an exception oop in JavaThread
  __ movptr(rax, Address(rdi, JavaThread::exception_oop_offset()));
  __ verify_oop(rax);

  // verify that there is no pending exception
  Label no_pending_exception;
  __ movptr(rax, Address(rdi, Thread::pending_exception_offset()));
  __ testptr(rax, rax);
  __ jcc(Assembler::zero, no_pending_exception);
  __ stop("must not have pending exception here");
  __ bind(no_pending_exception);
#endif

  __ bind(cont);

  // Compiled code leaves the floating point stack dirty, empty it.
  __ empty_FPU_stack();


  // Call C code.  Need thread and this frame, but NOT official VM entry
  // crud.  We cannot block on this call, no GC can happen.
  __ get_thread(rcx);
  __ push(rcx);
  // fetch_unroll_info needs to call last_java_frame()
  __ set_last_Java_frame(rcx, noreg, noreg, NULL);

  __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::fetch_unroll_info)));

  // Need to have an oopmap that tells fetch_unroll_info where to
  // find any register it might need.

  oop_maps->add_gc_map( __ pc()-start, map);

  // Discard arg to fetch_unroll_info
  __ pop(rcx);

  __ get_thread(rcx);
  __ reset_last_Java_frame(rcx, false, false);

  // Load UnrollBlock into EDI
  __ mov(rdi, rax);

  // Move the unpack kind to a safe place in the UnrollBlock because
  // we are very short of registers

  Address unpack_kind(rdi, Deoptimization::UnrollBlock::unpack_kind_offset_in_bytes());
  // retrieve the deopt kind from where we left it.
  __ pop(rax);
  __ movl(unpack_kind, rax);                      // save the unpack_kind value

   Label noException;
  __ cmpl(rax, Deoptimization::Unpack_exception);   // Was exception pending?
  __ jcc(Assembler::notEqual, noException);
  __ movptr(rax, Address(rcx, JavaThread::exception_oop_offset()));
  __ movptr(rdx, Address(rcx, JavaThread::exception_pc_offset()));
  __ movptr(Address(rcx, JavaThread::exception_oop_offset()), NULL_WORD);
  __ movptr(Address(rcx, JavaThread::exception_pc_offset()), NULL_WORD);

  __ verify_oop(rax);

  // Overwrite the result registers with the exception results.
  __ movptr(Address(rsp, RegisterSaver::raxOffset()*wordSize), rax);
  __ movptr(Address(rsp, RegisterSaver::rdxOffset()*wordSize), rdx);

  __ bind(noException);

  // Stack is back to only having register save data on the stack.
  // Now restore the result registers. Everything else is either dead or captured
  // in the vframeArray.

  RegisterSaver::restore_result_registers(masm);

  // All of the register save area has been popped of the stack. Only the
  // return address remains.

  // Pop all the frames we must move/replace.
  //
  // Frame picture (youngest to oldest)
  // 1: self-frame (no frame link)
  // 2: deopting frame  (no frame link)
  // 3: caller of deopting frame (could be compiled/interpreted).
  //
  // Note: by leaving the return address of self-frame on the stack
  // and using the size of frame 2 to adjust the stack
  // when we are done the return to frame 3 will still be on the stack.

  // Pop deoptimized frame
  __ addptr(rsp, Address(rdi,Deoptimization::UnrollBlock::size_of_deoptimized_frame_offset_in_bytes()));

  // sp should be pointing at the return address to the caller (3)

  // Stack bang to make sure there's enough room for these interpreter frames.
  if (UseStackBanging) {
    __ movl(rbx, Address(rdi ,Deoptimization::UnrollBlock::total_frame_sizes_offset_in_bytes()));
    __ bang_stack_size(rbx, rcx);
  }

  // Load array of frame pcs into ECX
  __ movptr(rcx,Address(rdi,Deoptimization::UnrollBlock::frame_pcs_offset_in_bytes()));

  __ pop(rsi); // trash the old pc

  // Load array of frame sizes into ESI
  __ movptr(rsi,Address(rdi,Deoptimization::UnrollBlock::frame_sizes_offset_in_bytes()));

  Address counter(rdi, Deoptimization::UnrollBlock::counter_temp_offset_in_bytes());

  __ movl(rbx, Address(rdi, Deoptimization::UnrollBlock::number_of_frames_offset_in_bytes()));
  __ movl(counter, rbx);

  // Pick up the initial fp we should save
  __ movptr(rbp, Address(rdi, Deoptimization::UnrollBlock::initial_fp_offset_in_bytes()));

  // Now adjust the caller's stack to make up for the extra locals
  // but record the original sp so that we can save it in the skeletal interpreter
  // frame and the stack walking of interpreter_sender will get the unextended sp
  // value and not the "real" sp value.

  Address sp_temp(rdi, Deoptimization::UnrollBlock::sender_sp_temp_offset_in_bytes());
  __ movptr(sp_temp, rsp);
  __ movl2ptr(rbx, Address(rdi, Deoptimization::UnrollBlock::caller_adjustment_offset_in_bytes()));
  __ subptr(rsp, rbx);

  // Push interpreter frames in a loop
  Label loop;
  __ bind(loop);
  __ movptr(rbx, Address(rsi, 0));      // Load frame size
#ifdef CC_INTERP
  __ subptr(rbx, 4*wordSize);           // we'll push pc and ebp by hand and
#ifdef ASSERT
  __ push(0xDEADDEAD);                  // Make a recognizable pattern
  __ push(0xDEADDEAD);
#else /* ASSERT */
  __ subptr(rsp, 2*wordSize);           // skip the "static long no_param"
#endif /* ASSERT */
#else /* CC_INTERP */
  __ subptr(rbx, 2*wordSize);           // we'll push pc and rbp, by hand
#endif /* CC_INTERP */
  __ pushptr(Address(rcx, 0));          // save return address
  __ enter();                           // save old & set new rbp,
  __ subptr(rsp, rbx);                  // Prolog!
  __ movptr(rbx, sp_temp);              // sender's sp
#ifdef CC_INTERP
  __ movptr(Address(rbp,
                  -(sizeof(BytecodeInterpreter)) + in_bytes(byte_offset_of(BytecodeInterpreter, _sender_sp))),
          rbx); // Make it walkable
#else /* CC_INTERP */
  // This value is corrected by layout_activation_impl
  __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), NULL_WORD);
  __ movptr(Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize), rbx); // Make it walkable
#endif /* CC_INTERP */
  __ movptr(sp_temp, rsp);              // pass to next frame
  __ addptr(rsi, wordSize);             // Bump array pointer (sizes)
  __ addptr(rcx, wordSize);             // Bump array pointer (pcs)
  __ decrementl(counter);             // decrement counter
  __ jcc(Assembler::notZero, loop);
  __ pushptr(Address(rcx, 0));          // save final return address

  // Re-push self-frame
  __ enter();                           // save old & set new rbp,

  //  Return address and rbp, are in place
  // We'll push additional args later. Just allocate a full sized
  // register save area
  __ subptr(rsp, (frame_size_in_words-additional_words - 2) * wordSize);

  // Restore frame locals after moving the frame
  __ movptr(Address(rsp, RegisterSaver::raxOffset()*wordSize), rax);
  __ movptr(Address(rsp, RegisterSaver::rdxOffset()*wordSize), rdx);
  __ fstp_d(Address(rsp, RegisterSaver::fpResultOffset()*wordSize));   // Pop float stack and store in local
  if( UseSSE>=2 ) __ movdbl(Address(rsp, RegisterSaver::xmm0Offset()*wordSize), xmm0);
  if( UseSSE==1 ) __ movflt(Address(rsp, RegisterSaver::xmm0Offset()*wordSize), xmm0);

  // Set up the args to unpack_frame

  __ pushl(unpack_kind);                     // get the unpack_kind value
  __ get_thread(rcx);
  __ push(rcx);

  // set last_Java_sp, last_Java_fp
  __ set_last_Java_frame(rcx, noreg, rbp, NULL);

  // Call C code.  Need thread but NOT official VM entry
  // crud.  We cannot block on this call, no GC can happen.  Call should
  // restore return values to their stack-slots with the new SP.
  __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::unpack_frames)));
  // Set an oopmap for the call site
  oop_maps->add_gc_map( __ pc()-start, new OopMap( frame_size_in_words, 0 ));

  // rax, contains the return result type
  __ push(rax);

  __ get_thread(rcx);
  __ reset_last_Java_frame(rcx, false, false);

  // Collect return values
  __ movptr(rax,Address(rsp, (RegisterSaver::raxOffset() + additional_words + 1)*wordSize));
  __ movptr(rdx,Address(rsp, (RegisterSaver::rdxOffset() + additional_words + 1)*wordSize));

  // Clear floating point stack before returning to interpreter
  __ empty_FPU_stack();

  // Check if we should push the float or double return value.
  Label results_done, yes_double_value;
  __ cmpl(Address(rsp, 0), T_DOUBLE);
  __ jcc (Assembler::zero, yes_double_value);
  __ cmpl(Address(rsp, 0), T_FLOAT);
  __ jcc (Assembler::notZero, results_done);

  // return float value as expected by interpreter
  if( UseSSE>=1 ) __ movflt(xmm0, Address(rsp, (RegisterSaver::xmm0Offset() + additional_words + 1)*wordSize));
  else            __ fld_d(Address(rsp, (RegisterSaver::fpResultOffset() + additional_words + 1)*wordSize));
  __ jmp(results_done);

  // return double value as expected by interpreter
  __ bind(yes_double_value);
  if( UseSSE>=2 ) __ movdbl(xmm0, Address(rsp, (RegisterSaver::xmm0Offset() + additional_words + 1)*wordSize));
  else            __ fld_d(Address(rsp, (RegisterSaver::fpResultOffset() + additional_words + 1)*wordSize));

  __ bind(results_done);

  // Pop self-frame.
  __ leave();                              // Epilog!

  // Jump to interpreter
  __ ret(0);

  // -------------
  // make sure all code is generated
  masm->flush();

  _deopt_blob = DeoptimizationBlob::create( &buffer, oop_maps, 0, exception_offset, reexecute_offset, frame_size_in_words);
  _deopt_blob->set_unpack_with_exception_in_tls_offset(exception_in_tls_offset);
}


#ifdef COMPILER2
//------------------------------generate_uncommon_trap_blob--------------------
void SharedRuntime::generate_uncommon_trap_blob() {
  // allocate space for the code
  ResourceMark rm;
  // setup code generation tools
  CodeBuffer   buffer("uncommon_trap_blob", 512, 512);
  MacroAssembler* masm = new MacroAssembler(&buffer);

  enum frame_layout {
    arg0_off,      // thread                     sp + 0 // Arg location for
    arg1_off,      // unloaded_class_index       sp + 1 // calling C
    // The frame sender code expects that rbp will be in the "natural" place and
    // will override any oopMap setting for it. We must therefore force the layout
    // so that it agrees with the frame sender code.
    rbp_off,       // callee saved register      sp + 2
    return_off,    // slot for return address    sp + 3
    framesize
  };

  address start = __ pc();
  // Push self-frame.
  __ subptr(rsp, return_off*wordSize);     // Epilog!

  // rbp, is an implicitly saved callee saved register (i.e. the calling
  // convention will save restore it in prolog/epilog) Other than that
  // there are no callee save registers no that adapter frames are gone.
  __ movptr(Address(rsp, rbp_off*wordSize), rbp);

  // Clear the floating point exception stack
  __ empty_FPU_stack();

  // set last_Java_sp
  __ get_thread(rdx);
  __ set_last_Java_frame(rdx, noreg, noreg, NULL);

  // Call C code.  Need thread but NOT official VM entry
  // crud.  We cannot block on this call, no GC can happen.  Call should
  // capture callee-saved registers as well as return values.
  __ movptr(Address(rsp, arg0_off*wordSize), rdx);
  // argument already in ECX
  __ movl(Address(rsp, arg1_off*wordSize),rcx);
  __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::uncommon_trap)));

  // Set an oopmap for the call site
  OopMapSet *oop_maps = new OopMapSet();
  OopMap* map =  new OopMap( framesize, 0 );
  // No oopMap for rbp, it is known implicitly

  oop_maps->add_gc_map( __ pc()-start, map);

  __ get_thread(rcx);

  __ reset_last_Java_frame(rcx, false, false);

  // Load UnrollBlock into EDI
  __ movptr(rdi, rax);

  // Pop all the frames we must move/replace.
  //
  // Frame picture (youngest to oldest)
  // 1: self-frame (no frame link)
  // 2: deopting frame  (no frame link)
  // 3: caller of deopting frame (could be compiled/interpreted).

  // Pop self-frame.  We have no frame, and must rely only on EAX and ESP.
  __ addptr(rsp,(framesize-1)*wordSize);     // Epilog!

  // Pop deoptimized frame
  __ movl2ptr(rcx, Address(rdi,Deoptimization::UnrollBlock::size_of_deoptimized_frame_offset_in_bytes()));
  __ addptr(rsp, rcx);

  // sp should be pointing at the return address to the caller (3)

  // Stack bang to make sure there's enough room for these interpreter frames.
  if (UseStackBanging) {
    __ movl(rbx, Address(rdi ,Deoptimization::UnrollBlock::total_frame_sizes_offset_in_bytes()));
    __ bang_stack_size(rbx, rcx);
  }


  // Load array of frame pcs into ECX
  __ movl(rcx,Address(rdi,Deoptimization::UnrollBlock::frame_pcs_offset_in_bytes()));

  __ pop(rsi); // trash the pc

  // Load array of frame sizes into ESI
  __ movptr(rsi,Address(rdi,Deoptimization::UnrollBlock::frame_sizes_offset_in_bytes()));

  Address counter(rdi, Deoptimization::UnrollBlock::counter_temp_offset_in_bytes());

  __ movl(rbx, Address(rdi, Deoptimization::UnrollBlock::number_of_frames_offset_in_bytes()));
  __ movl(counter, rbx);

  // Pick up the initial fp we should save
  __ movptr(rbp, Address(rdi, Deoptimization::UnrollBlock::initial_fp_offset_in_bytes()));

  // Now adjust the caller's stack to make up for the extra locals
  // but record the original sp so that we can save it in the skeletal interpreter
  // frame and the stack walking of interpreter_sender will get the unextended sp
  // value and not the "real" sp value.

  Address sp_temp(rdi, Deoptimization::UnrollBlock::sender_sp_temp_offset_in_bytes());
  __ movptr(sp_temp, rsp);
  __ movl(rbx, Address(rdi, Deoptimization::UnrollBlock::caller_adjustment_offset_in_bytes()));
  __ subptr(rsp, rbx);

  // Push interpreter frames in a loop
  Label loop;
  __ bind(loop);
  __ movptr(rbx, Address(rsi, 0));      // Load frame size
#ifdef CC_INTERP
  __ subptr(rbx, 4*wordSize);           // we'll push pc and ebp by hand and
#ifdef ASSERT
  __ push(0xDEADDEAD);                  // Make a recognizable pattern
  __ push(0xDEADDEAD);                  // (parm to RecursiveInterpreter...)
#else /* ASSERT */
  __ subptr(rsp, 2*wordSize);           // skip the "static long no_param"
#endif /* ASSERT */
#else /* CC_INTERP */
  __ subptr(rbx, 2*wordSize);           // we'll push pc and rbp, by hand
#endif /* CC_INTERP */
  __ pushptr(Address(rcx, 0));          // save return address
  __ enter();                           // save old & set new rbp,
  __ subptr(rsp, rbx);                  // Prolog!
  __ movptr(rbx, sp_temp);              // sender's sp
#ifdef CC_INTERP
  __ movptr(Address(rbp,
                  -(sizeof(BytecodeInterpreter)) + in_bytes(byte_offset_of(BytecodeInterpreter, _sender_sp))),
          rbx); // Make it walkable
#else /* CC_INTERP */
  // This value is corrected by layout_activation_impl
  __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), NULL_WORD );
  __ movptr(Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize), rbx); // Make it walkable
#endif /* CC_INTERP */
  __ movptr(sp_temp, rsp);              // pass to next frame
  __ addptr(rsi, wordSize);             // Bump array pointer (sizes)
  __ addptr(rcx, wordSize);             // Bump array pointer (pcs)
  __ decrementl(counter);             // decrement counter
  __ jcc(Assembler::notZero, loop);
  __ pushptr(Address(rcx, 0));            // save final return address

  // Re-push self-frame
  __ enter();                           // save old & set new rbp,
  __ subptr(rsp, (framesize-2) * wordSize);   // Prolog!


  // set last_Java_sp, last_Java_fp
  __ get_thread(rdi);
  __ set_last_Java_frame(rdi, noreg, rbp, NULL);

  // Call C code.  Need thread but NOT official VM entry
  // crud.  We cannot block on this call, no GC can happen.  Call should
  // restore return values to their stack-slots with the new SP.
  __ movptr(Address(rsp,arg0_off*wordSize),rdi);
  __ movl(Address(rsp,arg1_off*wordSize), Deoptimization::Unpack_uncommon_trap);
  __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::unpack_frames)));
  // Set an oopmap for the call site
  oop_maps->add_gc_map( __ pc()-start, new OopMap( framesize, 0 ) );

  __ get_thread(rdi);
  __ reset_last_Java_frame(rdi, true, false);

  // Pop self-frame.
  __ leave();     // Epilog!

  // Jump to interpreter
  __ ret(0);

  // -------------
  // make sure all code is generated
  masm->flush();

   _uncommon_trap_blob = UncommonTrapBlob::create(&buffer, oop_maps, framesize);
}
#endif // COMPILER2

//------------------------------generate_handler_blob------
//
// Generate a special Compile2Runtime blob that saves all registers,
// setup oopmap, and calls safepoint code to stop the compiled code for
// a safepoint.
//
static SafepointBlob* generate_handler_blob(address call_ptr, bool cause_return) {

  // Account for thread arg in our frame
  const int additional_words = 1;
  int frame_size_in_words;

  assert (StubRoutines::forward_exception_entry() != NULL, "must be generated before");

  ResourceMark rm;
  OopMapSet *oop_maps = new OopMapSet();
  OopMap* map;

  // allocate space for the code
  // setup code generation tools
  CodeBuffer   buffer("handler_blob", 1024, 512);
  MacroAssembler* masm = new MacroAssembler(&buffer);

  const Register java_thread = rdi; // callee-saved for VC++
  address start   = __ pc();
  address call_pc = NULL;

  // If cause_return is true we are at a poll_return and there is
  // the return address on the stack to the caller on the nmethod
  // that is safepoint. We can leave this return on the stack and
  // effectively complete the return and safepoint in the caller.
  // Otherwise we push space for a return address that the safepoint
  // handler will install later to make the stack walking sensible.
  if( !cause_return )
    __ push(rbx);                // Make room for return address (or push it again)

  map = RegisterSaver::save_live_registers(masm, additional_words, &frame_size_in_words, false);

  // The following is basically a call_VM. However, we need the precise
  // address of the call in order to generate an oopmap. Hence, we do all the
  // work ourselves.

  // Push thread argument and setup last_Java_sp
  __ get_thread(java_thread);
  __ push(java_thread);
  __ set_last_Java_frame(java_thread, noreg, noreg, NULL);

  // if this was not a poll_return then we need to correct the return address now.
  if( !cause_return ) {
    __ movptr(rax, Address(java_thread, JavaThread::saved_exception_pc_offset()));
    __ movptr(Address(rbp, wordSize), rax);
  }

  // do the call
  __ call(RuntimeAddress(call_ptr));

  // Set an oopmap for the call site.  This oopmap will map all
  // oop-registers and debug-info registers as callee-saved.  This
  // will allow deoptimization at this safepoint to find all possible
  // debug-info recordings, as well as let GC find all oops.

  oop_maps->add_gc_map( __ pc() - start, map);

  // Discard arg
  __ pop(rcx);

  Label noException;

  // Clear last_Java_sp again
  __ get_thread(java_thread);
  __ reset_last_Java_frame(java_thread, false, false);

  __ cmpptr(Address(java_thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD);
  __ jcc(Assembler::equal, noException);

  // Exception pending

  RegisterSaver::restore_live_registers(masm);

  __ jump(RuntimeAddress(StubRoutines::forward_exception_entry()));

  __ bind(noException);

  // Normal exit, register restoring and exit
  RegisterSaver::restore_live_registers(masm);

  __ ret(0);

  // make sure all code is generated
  masm->flush();

  // Fill-out other meta info
  return SafepointBlob::create(&buffer, oop_maps, frame_size_in_words);
}

//
// generate_resolve_blob - call resolution (static/virtual/opt-virtual/ic-miss
//
// Generate a stub that calls into vm to find out the proper destination
// of a java call. All the argument registers are live at this point
// but since this is generic code we don't know what they are and the caller
// must do any gc of the args.
//
static RuntimeStub* generate_resolve_blob(address destination, const char* name) {
  assert (StubRoutines::forward_exception_entry() != NULL, "must be generated before");

  // allocate space for the code
  ResourceMark rm;

  CodeBuffer buffer(name, 1000, 512);
  MacroAssembler* masm                = new MacroAssembler(&buffer);

  int frame_size_words;
  enum frame_layout {
                thread_off,
                extra_words };

  OopMapSet *oop_maps = new OopMapSet();
  OopMap* map = NULL;

  int start = __ offset();

  map = RegisterSaver::save_live_registers(masm, extra_words, &frame_size_words);

  int frame_complete = __ offset();

  const Register thread = rdi;
  __ get_thread(rdi);

  __ push(thread);
  __ set_last_Java_frame(thread, noreg, rbp, NULL);

  __ call(RuntimeAddress(destination));


  // Set an oopmap for the call site.
  // We need this not only for callee-saved registers, but also for volatile
  // registers that the compiler might be keeping live across a safepoint.

  oop_maps->add_gc_map( __ offset() - start, map);

  // rax, contains the address we are going to jump to assuming no exception got installed

  __ addptr(rsp, wordSize);

  // clear last_Java_sp
  __ reset_last_Java_frame(thread, true, false);
  // check for pending exceptions
  Label pending;
  __ cmpptr(Address(thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD);
  __ jcc(Assembler::notEqual, pending);

  // get the returned methodOop
  __ movptr(rbx, Address(thread, JavaThread::vm_result_offset()));
  __ movptr(Address(rsp, RegisterSaver::rbx_offset() * wordSize), rbx);

  __ movptr(Address(rsp, RegisterSaver::rax_offset() * wordSize), rax);

  RegisterSaver::restore_live_registers(masm);

  // We are back the the original state on entry and ready to go.

  __ jmp(rax);

  // Pending exception after the safepoint

  __ bind(pending);

  RegisterSaver::restore_live_registers(masm);

  // exception pending => remove activation and forward to exception handler

  __ get_thread(thread);
  __ movptr(Address(thread, JavaThread::vm_result_offset()), NULL_WORD);
  __ movptr(rax, Address(thread, Thread::pending_exception_offset()));
  __ jump(RuntimeAddress(StubRoutines::forward_exception_entry()));

  // -------------
  // make sure all code is generated
  masm->flush();

  // return the  blob
  // frame_size_words or bytes??
  return RuntimeStub::new_runtime_stub(name, &buffer, frame_complete, frame_size_words, oop_maps, true);
}

void SharedRuntime::generate_stubs() {

  _wrong_method_blob = generate_resolve_blob(CAST_FROM_FN_PTR(address, SharedRuntime::handle_wrong_method),
                                        "wrong_method_stub");

  _ic_miss_blob      = generate_resolve_blob(CAST_FROM_FN_PTR(address, SharedRuntime::handle_wrong_method_ic_miss),
                                        "ic_miss_stub");

  _resolve_opt_virtual_call_blob = generate_resolve_blob(CAST_FROM_FN_PTR(address, SharedRuntime::resolve_opt_virtual_call_C),
                                        "resolve_opt_virtual_call");

  _resolve_virtual_call_blob = generate_resolve_blob(CAST_FROM_FN_PTR(address, SharedRuntime::resolve_virtual_call_C),
                                        "resolve_virtual_call");

  _resolve_static_call_blob = generate_resolve_blob(CAST_FROM_FN_PTR(address, SharedRuntime::resolve_static_call_C),
                                        "resolve_static_call");

  _polling_page_safepoint_handler_blob =
    generate_handler_blob(CAST_FROM_FN_PTR(address,
                   SafepointSynchronize::handle_polling_page_exception), false);

  _polling_page_return_handler_blob =
    generate_handler_blob(CAST_FROM_FN_PTR(address,
                   SafepointSynchronize::handle_polling_page_exception), true);

  generate_deopt_blob();
#ifdef COMPILER2
  generate_uncommon_trap_blob();
#endif // COMPILER2
}