Summary: ASSERT and other symbols used incorrectly with #if are supposed to be defined or not.
Reviewed-by: dholmes, mikael

Summary: Reuse the parallel reference processing oop closures during serial reference processing.
Reviewed-by: brutisso

Summary: Set ConcGCThreads to the calculated number of marking threads.
Reviewed-by: jmasa, ysr

Summary: Check that the concurrent marking worker gang exists in ConcurrentMark::print_worker_threads_on(). Changes were also reviewed by Vitaly Davidovich <vitalyd@gmail.com>.
Reviewed-by: brutisso

8007772: G1: assert(!hr->isHumongous() || mr.start() == hr->bottom()) failed: the start of HeapRegion and MemRegion should be consistent for humongous regions
Summary: In do_marking_step(), we should always give up current region after scanning the object, if the region is humongous.
Reviewed-by: brutisso, jwilhelm, tamao

Summary: Skip unnecessary scanning of bitmap for unmarked humongous objects/regions.
Reviewed-by: jwilhelm, johnc
Contributed-by: NTao Mao <tao.mao@oracle.com>

Summary: Reset the marking state, including the mark stack overflow flag, in the event of a marking stack overflow during serial reference processing.
Reviewed-by: jmasa

Summary: Restore non-silent output of heap verification.
Reviewed-by: ysr, brutisso, jmasa

Summary: Change the type of various task num fields, parameters etc to unsigned and rename them to be more consistent with the other collectors. Code changes were also reviewed by Vitaly Davidovich.
Reviewed-by: johnc
Contributed-by: NKaushik Srenevasan <kaushik@twitter.com>

Summary: Set the value of MarkStackSize to a value based on the number of parallel marking threads with a reasonable minimum. Expand the marking stack if we have to restart marking due to an overflow up to a reasonable maximum. Allocate the underlying space for the marking stack from virtual memory.
Reviewed-by: jmasa, brutisso

Summary: The clipping code in the routine that sets the bits for a range of cards, in the liveness accounting verification code was incorrect. It set all the bits in the card bitmap from the given starting index which would lead to spurious marking verification failures.
Reviewed-by: brutisso, jwilhelm, jmasa

Reviewed-by: brutisso, johnc, ysr
Contributed-by: NHal Mo <kungu.mjh@taobao.com>

Summary: Remove PermGen, allocate meta-data in metaspace linked to class loaders, rewrite GC walking, rewrite and rename metadata to be C++ classes
Reviewed-by: jmasa, stefank, never, coleenp, kvn, brutisso, mgerdin, dholmes, jrose, twisti, roland
Contributed-by: Njmasa &lt;jon.masamitsu@oracle.com&gt;, stefank &lt;stefan.karlsson@oracle.com&gt;, mgerdin &lt;mikael.gerdin@oracle.com&gt;, never <tom.rodriguez@oracle.com>

Summary: Various cleanups as a prelude to introducing iterators for HeapRegions.
Reviewed-by: johnc, brutisso

Summary: Also reviewed by: vitalyd@gmail.com. Move the timing out of G1CollectorPolicy into the G1GCPhaseTimes class
Reviewed-by: johnc

7151532: DCmd for hotspot native memory tracking
Summary: Implementation of native memory tracking phase 1, which tracks VM native memory usage, and related DCmd
Reviewed-by: acorn, coleenp, fparain

Summary: Removed the HeapRegion::_top_at_conc_mark_count field. It is no longer needed as a result of the changes for 6888336 and 7127706. Refactored the closures that finalize and verify the liveness counting data so that common functionality was placed into a base class.
Reviewed-by: brutisso, tonyp

Summary: Cleanup of the CSet chooser class: standardize on uints for region num and indexes (instead of int, jint, etc.), make the method / field naming style more consistent, remove a lot of dead code.
Reviewed-by: johnc, brutisso

Summary: Change the type of fields / variables / etc. that represent region counts and indeces from size_t to uint.
Reviewed-by: iveresov, brutisso, jmasa, jwilhelm

Summary: removed oop_verify_old_oop and allow_dirty. Also reviewed by: alexlamsl@gmail.com
Reviewed-by: jmasa, jwilhelm

Summary: Added log levels "fine", "finer" and "finest". Let PrintGC map to "fine" and PrintGCDetails map to "finer". Separated out the per worker information in the G1 logging to the "finest" level.
Reviewed-by: stefank, jwilhelm, tonyp, johnc

Summary: Removed lots of dead code after some recent conc mark changes.
Reviewed-by: brutisso, johnc

Summary: Re-enable survivors during the initial-mark pause. Afterwards, the concurrent marking threads have to scan them and mark everything reachable from them. The next GC will have to wait for the survivors to be scanned.
Reviewed-by: brutisso, johnc

Summary: Remove the separate counting phase of concurrent marking by tracking the amount of marked bytes and the cards spanned by marked objects in marking task/worker thread local data structures, which are updated as individual objects are marked.
Reviewed-by: brutisso, tonyp

Summary: Extend the jmap -heap output for G1 to include some more G1-specific information.
Reviewed-by: brutisso, johnc, poonam

Summary: Removed references to CMS in the concurrentMark.cpp/hpp files.
Reviewed-by: tonyp, jmasa, johnc

Summary: There is a high number of mispredicted branches associated with calling BitMap::iteratate() from within CMBitMapRO::iterate(). Implement a version of CMBitMapRO::iterate() directly using inline-able routines.
Reviewed-by: tonyp, iveresov

Summary: This change simplifies the interaction between GC and concurrent marking. By disabling survivor spaces during the initial-mark pause we don't need to propagate marks of objects we copy during each GC (since we never need to copy an explicitly marked object).
Reviewed-by: johnc, brutisso

Summary: Replaced the code with a ShouldNotReachHere
Reviewed-by: tonyp, jmasa

Summary: Parallelize the removal of self forwarding pointers etc. by wrapping in a HeapRegion closure, which is then wrapped inside an AbstractGangTask.
Reviewed-by: tonyp, iveresov

Summary: Running G1 with ParallelGCThreads==0 results in various crashes and asserts. Most of these are caused by unguarded references to the worker threads array or an incorrect number of active workers.
Reviewed-by: jmasa, tonyp

Summary: Change variables representing the number of GC workers to uint from int and size_t.  Change the parameter in work(int i) to work(uint worker_id).
Reviewed-by: brutisso, tonyp

Summary: Parallelize the serial code that was used to mark objects reachable from survivor objects in the collection set. Some minor improvments in the timers used to track the freeing of the collection set along with some tweaks to PrintGCDetails.
Reviewed-by: tonyp, brutisso

Summary: Keep track of all the old regions in the heap with a heap region set.
Reviewed-by: brutisso, johnc

Summary: Removed unused fields and methods, removed the G1CollectoryPolicy_BestRegionsFirst class and folded its functionality into the G1CollectorPolicy class.
Reviewed-by: ysr, brutisso, jcoomes

Summary: Declare GrainBytes, GrainWords, and CardsPerRegion as size_t.
Reviewed-by: jcoomes, tonyp, jmasa

Summary: G1 now uses two reference processors - one is used by concurrent marking and the other is used by STW GCs (both full and incremental evacuation pauses). In an evacuation pause, the reference processor is embedded into the closures used to scan objects. Doing so causes causes reference objects to be 'discovered' by the reference processor. At the end of the evacuation pause, these discovered reference objects are processed - preserving (and copying) referent objects (and their reachable graphs) as appropriate.
Reviewed-by: ysr, jwilhelm, brutisso, stefank, tonyp

Summary: Cast HeapRegion::GrainBytes to size_t in output statement.
Reviewed-by: ysr, brutisso, pbk, tonyp

Summary: Displays the elapsed time taken to perform reference processing during remark as part of the PrintGCDetails output.
Reviewed-by: ysr

Summary: It introduces ergonomic decision logging in G1 for the following heuristics: heap sizing, collection set construction, concurrent cycle initiation, and partially-young GC start/end. The code has a bit of refactoring in a few places to make the decision logging possible. It also replaces alternative ad-hoc logging that we have under different parameters and switches (G1_DEBUG, G1PolicyVerbose).
Reviewed-by: johnc, ysr