Skip to content

D
dragonwell11

openanolis / dragonwell11

通知 7
Star 2
Fork 0
D
dragonwell11

体验新版 GitCode，发现更多精彩内容 >>

提交 41695d56 编写于 作者: E erikj
浏览文件
操作

8005549: build-infra: Merge NewMakefile.gmk and common/makefiles/Makefile 

Reviewed-by: ohair, tbell
上级 b253525e
隐藏空白更改
内联 并排
Showing with 269 addition and 380 deletion
NewMakefile.gmk
浏览文件 @ 41695d56
......@@ -23,273 +23,107 @@
# questions.
#
# Utilities used in this Makefile
BASENAME=basename
CAT=cat
CD=cd
CMP=cmp
CP=cp
ECHO=echo
MKDIR=mkdir
PRINTF=printf
PWD=pwd
TAR=tar
ifeq ($(PLATFORM),windows)
ZIP=zip
else
# store symbolic links as the link
ZIP=zip -y
# This must be the first rule
default:
# Inclusion of this pseudo-target will cause make to execute this file
# serially, regardless of -j. Recursively called makefiles will not be
# affected, however. This is required for correct dependency management.
.NOTPARALLEL:
# The shell code below will be executed on /usr/ccs/bin/make on Solaris, but not in GNU make.
# /usr/ccs/bin/make lacks basically every other flow control mechanism.
TEST_FOR_NON_GNUMAKE:sh=echo You are not using GNU make/gmake, this is a requirement. Check your path. 1>&2 && exit 1
# Assume we have GNU make, but check version.
ifeq (,$(findstring 3.81,$(MAKE_VERSION)))
ifeq (,$(findstring 3.82,$(MAKE_VERSION)))
$(error This version of GNU Make is too low ($(MAKE_VERSION)). Check your path, or upgrade to 3.81 or newer.)
endif
endif
# Insure we have a path that looks like it came from pwd
# (This is mostly for Windows sake and drive letters)
define UnixPath # path
$(shell (cd "$1" && $(PWD)))
endef
# Current root directory
CURRENT_DIRECTORY := $(shell $(PWD))
# Build directory root
BUILD_DIR_ROOT = $(CURRENT_DIRECTORY)/build
# All configured Makefiles to run
ALL_MAKEFILES = $(wildcard $(BUILD_DIR_ROOT)/*-*/Makefile)
# All bundles to create
ALL_IMAGE_DIRS = $(wildcard $(BUILD_DIR_ROOT)/*-*/images/*-image)
# Build all the standard 'all', 'images', and 'clean' targets
all images clean: checks
@if [ "$(ALL_MAKEFILES)" = "" ] ; then \
$(ECHO) "ERROR: No configurations to build"; exit 1; \
fi
@for bdir in $(dir $(ALL_MAKEFILES)) ; do \
$(ECHO) "$(CD) $${bdir} && $(MAKE) $@" ; \
$(CD) $${bdir} && $(MAKE) $@ ; \
done
# TBD: Deploy input
$(BUILD_DIR_ROOT)/.deploy_input:
@if [ "$(ALL_MAKEFILES)" = "" ] ; then \
$(ECHO) "ERROR: No configurations to build"; exit 1; \
fi
@for bdir in $(dir $(ALL_MAKEFILES)) ; do \
if [ deploy/make/Makefile ] ; then \
echo "Attempting deploy build." ; \
( \
$(RM) -r $${bdir}/deploy_input ; \
$(MKDIR) -p $${bdir}/deploy_input ; \
( $(CD) $${bdir}/images && $(TAR) -cf - j2sdk-image j2re-image ) \
| ( $(CD) $${bdir}/deploy_input && $(TAR) -xf - ) ; \
) ; \
fi; \
done
touch $@
# TBD: Deploy images
deploy: $(BUILD_DIR_ROOT)/.deploy_input
@if [ "$(ALL_MAKEFILES)" = "" ] ; then \
$(ECHO) "ERROR: No configurations to build"; exit 1; \
fi
@for bdir in $(dir $(ALL_MAKEFILES)) ; do \
if [ deploy/make/Makefile ] ; then \
echo "Attempting deploy build." ; \
( \
$(CD) deploy/make && \
$(MAKE) \
ABS_OUTPUTDIR=$${bdir}/deploy_input \
OUTPUTDIR=$${bdir}/deploy_input \
) ; \
fi; \
done
# TBD: Install bundles
install:
# Bundle creation
bundles:
@if [ "$(ALL_IMAGE_DIRS)" = "" ] ; then \
$(ECHO) "ERROR: No images to bundle"; exit 1; \
fi
@for i in $(ALL_IMAGE_DIRS) ; do \
$(MKDIR) -p $${i}/../../bundles && \
$(RM) $${i}/../../bundles/`$(BASENAME) $${i}`.zip && \
$(ECHO) "$(CD) $${i} && $(ZIP) -q -r ../../bundles/`$(BASENAME) $${i}`.zip ." && \
$(CD) $${i} && $(ZIP) -q -r ../../bundles/`$(BASENAME) $${i}`.zip . ; \
done
# Clobber all the built files
clobber::
$(RM) -r $(BUILD_DIR_ROOT)
# Make various checks to insure the build will be successful
# Possibilities:
# * Check that if any closed repo is provided, they all must be.
# * Check that all open repos exist, at least until we are ready for some
# kind of partial build.
checks:
@$(ECHO) "No checks yet"
# Keep track of user targets
USER_TARGETS += all deploy install images clean clobber checks
###########################################################################
# To help in adoption of the new configure&&make build process, a bridge
# build will use the old settings to run configure and do the build.
# Build with the configure bridge
bridgeBuild: bridge2configure images
# Bridge from old Makefile ALT settings to configure options
bridge2configure: $(BUILD_DIR_ROOT)/.bridge2configureOpts
bash ./configure $(strip $(shell $(CAT) $<))
# Create a file with configure options created from old Makefile mechanisms.
$(BUILD_DIR_ROOT)/.bridge2configureOpts: $(BUILD_DIR_ROOT)/.bridge2configureOptsLatest
$(RM) $@
$(CP) $< $@
# Use this file to only change when obvious things have changed
$(BUILD_DIR_ROOT)/.bridge2configureOptsLatest: FRC
$(RM) $@.tmp
$(MKDIR) -p $(BUILD_DIR_ROOT)
@$(ECHO) " --with-debug-level=$(if $(DEBUG_LEVEL),$(DEBUG_LEVEL),release) " >> $@.tmp
ifdef ARCH_DATA_MODEL
@$(ECHO) " --with-target-bits=$(ARCH_DATA_MODEL) " >> $@.tmp
endif
ifdef ALT_PARALLEL_COMPILE_JOBS
@$(ECHO) " --with-num-cores=$(ALT_PARALLEL_COMPILE_JOBS) " >> $@.tmp
endif
ifdef ALT_BOOTDIR
@$(ECHO) " --with-boot-jdk=$(call UnixPath,$(ALT_BOOTDIR)) " >> $@.tmp
endif
ifdef ALT_CUPS_HEADERS_PATH
@$(ECHO) " --with-cups-include=$(call UnixPath,$(ALT_CUPS_HEADERS_PATH)) " >> $@.tmp
endif
ifdef ALT_FREETYPE_HEADERS_PATH
@$(ECHO) " --with-freetype=$(call UnixPath,$(ALT_FREETYPE_HEADERS_PATH)/..) " >> $@.tmp
# Locate this Makefile
ifeq ($(filter /%,$(lastword $(MAKEFILE_LIST))),)
makefile_path:=$(CURDIR)/$(lastword $(MAKEFILE_LIST))
else
makefile_path:=$(lastword $(MAKEFILE_LIST))
endif
@if [ -f $@ ] ; then \
if ! $(CMP) $@ $@.tmp > /dev/null ; then \
$(CP) $@.tmp $@ ; \
fi ; \
else \
$(CP) $@.tmp $@ ; \
fi
$(RM) $@.tmp
# Clobber all the built files
clobber:: bridge2clobber
bridge2clobber::
$(RM) $(BUILD_DIR_ROOT)/.bridge2*
$(RM) $(BUILD_DIR_ROOT)/.deploy_input
# Keep track of phony targets
PHONY_LIST += bridge2configure bridgeBuild bridge2clobber
root_dir:=$(dir $(makefile_path))
###########################################################################
# Sanity checks (history target)
#
sanity: checks
include $(root_dir)/common/makefiles/Jprt.gmk
# Keep track of user targets
USER_TARGETS += sanity
# ... and then we can include our helper functions
include $(root_dir)/common/makefiles/MakeHelpers.gmk
###########################################################################
# Javadocs
#
$(eval $(call ParseLogLevel))
$(eval $(call ParseConfAndSpec))
javadocs:
cd common/makefiles && $(MAKE) -f MakefileJavadoc.gmk
# Keep track of user targets
USER_TARGETS += javadocs
###########################################################################
# JPRT targets
ifndef JPRT_ARCHIVE_BUNDLE
JPRT_ARCHIVE_BUNDLE=/tmp/jprt_bundles/j2sdk-image.zip
# Now determine if we have zero, one or several configurations to build.
ifeq ($(SPEC),)
# Since we got past ParseConfAndSpec, we must be building a global target. Do nothing.
else
ifeq ($(words $(SPEC)),1)
# We are building a single configuration. This is the normal case. Execute the Main.gmk file.
include $(root_dir)/common/makefiles/Main.gmk
else
# We are building multiple configurations.
# First, find out the valid targets
# Run the makefile with an arbitraty SPEC using -p -q (quiet dry-run and dump rules) to find
# available PHONY targets. Use this list as valid targets to pass on to the repeated calls.
all_phony_targets=$(filter-out $(global_targets), $(strip $(shell \
$(MAKE) -p -q -f common/makefiles SPEC=$(firstword $(SPEC)) | \
grep ^.PHONY: | head -n 1 | cut -d " " -f 2-)))
$(all_phony_targets):
@$(foreach spec,$(SPEC),($(MAKE) -f NewMakefile.gmk SPEC=$(spec) $(VERBOSE) VERBOSE=$(VERBOSE) $@) &&) true
endif
endif
jprt_build_product: DEBUG_LEVEL=release
jprt_build_product: BUILD_DIRNAME=*-release
jprt_build_product: jprt_build_generic
jprt_build_fastdebug: DEBUG_LEVEL=fastdebug
jprt_build_fastdebug: BUILD_DIRNAME=*-fastdebug
jprt_build_fastdebug: jprt_build_generic
jprt_build_debug: DEBUG_LEVEL=slowdebug
jprt_build_debug: BUILD_DIRNAME=*-debug
jprt_build_debug: jprt_build_generic
jprt_build_generic: $(JPRT_ARCHIVE_BUNDLE)
$(JPRT_ARCHIVE_BUNDLE): bridgeBuild bundles
$(MKDIR) -p $(@D)
$(RM) $@
$(CP) $(BUILD_DIR_ROOT)/$(BUILD_DIRNAME)/bundles/j2sdk-image.zip $@
# Keep track of phony targets
PHONY_LIST += jprt_build_product jprt_build_fastdebug jprt_build_debug \
jprt_build_generic
###########################################################################
# Help target
HELP_FORMAT=%12s%s\n
# Here are "global" targets, i.e. targets that can be executed without specifying a single configuration.
# If you addd more global targets, please update the variable global_targets in MakeHelpers.
help:
@$(PRINTF) "# JDK Makefile\n"
@$(PRINTF) "#\n"
@$(PRINTF) "# Usage: make [Target]\n"
@$(PRINTF) "#\n"
@$(PRINTF) "# $(HELP_FORMAT)" "Target " "Description"
@$(PRINTF) "# $(HELP_FORMAT)" "------ " "-----------"
@for i in $(USER_TARGETS) ; do \
$(MAKE) help_$${i} ; \
done
@$(PRINTF) "#\n"
help_all:
@$(PRINTF) "# $(HELP_FORMAT)" "$(subst help_,,$@) - " \
"Build the entire jdk but not the images"
help_images:
@$(PRINTF) "# $(HELP_FORMAT)" "$(subst help_,,$@) - " \
"Create the jdk images for the builds"
help_deploy:
@$(PRINTF) "# $(HELP_FORMAT)" "$(subst help_,,$@) - " \
"Create the jdk deploy images from the jdk images"
help_install:
@$(PRINTF) "# $(HELP_FORMAT)" "$(subst help_,,$@) - " \
"Create the jdk install bundles from the deploy images"
help_clean:
@$(PRINTF) "# $(HELP_FORMAT)" "$(subst help_,,$@) - " \
"Clean and prepare for a fresh build from scratch"
help_clobber:
@$(PRINTF) "# $(HELP_FORMAT)" "$(subst help_,,$@) - " \
"Clean and also purge any hidden derived data"
help_checks:
@$(PRINTF) "# $(HELP_FORMAT)" "$(subst help_,,$@) - " \
"Perform various checks to make sure we can build"
help_sanity:
@$(PRINTF) "# $(HELP_FORMAT)" "$(subst help_,,$@) - " \
"Same as 'make checks'"
help_javadocs:
@$(PRINTF) "# $(HELP_FORMAT)" "$(subst help_,,$@) - " \
"Build the javadocs"
help_help:
@$(PRINTF) "# $(HELP_FORMAT)" "$(subst help_,,$@) - " \
"Print out the help messages"
# Keep track of user targets
USER_TARGETS += help
###########################################################################
# Phony targets
.PHONY: $(PHONY_LIST) $(USER_TARGETS)
# Force target
FRC:
$(info )
$(info OpenJDK Makefile help)
$(info =====================)
$(info )
$(info Common make targets)
$(info . make [default] # Compile all product in langtools, hotspot, jaxp, jaxws,)
$(info . # corba and jdk)
$(info . make all # Compile everything, all repos and images)
$(info . make images # Create complete j2sdk and j2re images)
$(info . make overlay-images # Create limited images for sparc 64 bit platforms)
$(info . make bootcycle-images # Build images twice, second time with newly build JDK)
$(info . make install # Install the generated images locally)
$(info . make clean # Remove all files generated by make, but not those)
$(info . # generated by configure)
$(info . make dist-clean # Remove all files, including configuration)
$(info . make help # Give some help on using make)
$(info . make test # Run tests, default is all tests (see TEST below))
$(info )
$(info Targets for specific components)
$(info (Component is any of langtools, corba, jaxp, jaxws, hotspot, jdk, images or overlay-images))
$(info . make <component> # Build <component> and everything it depends on. )
$(info . make <component>-only # Build <component> only, without dependencies. This)
$(info . # is faster but can result in incorrect build results!)
$(info . make clean-<component> # Remove files generated by make for <component>)
$(info )
$(info Useful make variables)
$(info . make CONF= # Build all configurations (note, assignment is empty))
$(info . make CONF=<substring> # Build the configuration(s) with a name matching)
$(info . # <substring>)
$(info )
$(info . make LOG=<loglevel> # Change the log level from warn to <loglevel>)
$(info . # Available log levels are:)
$(info . # 'warn' (default), 'info', 'debug' and 'trace')
$(info . # To see executed command lines, use LOG=debug)
$(info )
$(info . make JOBS=<n> # Run <n> parallel make jobs)
$(info . # Note that -jN does not work as expected!)
$(info )
$(info . make test TEST=<test> # Only run the given test or tests, e.g.)
$(info . # make test TEST="jdk_lang jdk_net")
$(info )
.PHONY: help
common/autoconf/Makefile.in
浏览文件 @ 41695d56
......@@ -24,4 +24,4 @@
# This Makefile was generated by configure @DATE_WHEN_CONFIGURED@
# GENERATED FILE, DO NOT EDIT
SPEC:=@OUTPUT_ROOT@/spec.gmk
include @SRC_ROOT@/common/makefiles/Makefile
include @SRC_ROOT@/NewMakefile.gmk
common/autoconf/generated-configure.sh
浏览文件 @ 41695d56
......@@ -3679,7 +3679,7 @@ fi
#CUSTOM_AUTOCONF_INCLUDE
# Do not change or remove the following line, it is needed for consistency checks:
DATE_WHEN_GENERATED=1356635654
DATE_WHEN_GENERATED=1356638459
###############################################################################
#
common/makefiles/Jprt.gmk 0 → 100644
浏览文件 @ 41695d56
#
# Copyright (c) 2012, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License version 2 only, as
# published by the Free Software Foundation. Oracle designates this
# particular file as subject to the "Classpath" exception as provided
# by Oracle in the LICENSE file that accompanied this code.
#
# This code is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# version 2 for more details (a copy is included in the LICENSE file that
# accompanied this code).
#
# You should have received a copy of the GNU General Public License version
# 2 along with this work; if not, write to the Free Software Foundation,
# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
#
# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
# or visit www.oracle.com if you need additional information or have any
# questions.
#
# This file is included by the root NewerMakefile and contains targets
# and utilities needed by JPRT.
# Utilities used in this Makefile
CAT=cat
CMP=cmp
CP=cp
ECHO=echo
MKDIR=mkdir
PRINTF=printf
PWD=pwd
# Insure we have a path that looks like it came from pwd
# (This is mostly for Windows sake and drive letters)
define UnixPath # path
$(shell (cd "$1" && $(PWD)))
endef
BUILD_DIR_ROOT:=$(root_dir)/build
###########################################################################
# To help in adoption of the new configure&&make build process, a bridge
# build will use the old settings to run configure and do the build.
# Build with the configure bridge. After running configure, restart make
# to parse the new spec file.
BRIDGE_TARGETS := all
bridgeBuild: bridge2configure
@cd $(root_dir) && $(MAKE) -f NewMakefile.gmk $(BRIDGE_TARGETS)
# Bridge from old Makefile ALT settings to configure options
bridge2configure: $(BUILD_DIR_ROOT)/.bridge2configureOpts
bash ./configure $(strip $(shell $(CAT) $<))
# Create a file with configure options created from old Makefile mechanisms.
$(BUILD_DIR_ROOT)/.bridge2configureOpts: $(BUILD_DIR_ROOT)/.bridge2configureOptsLatest
$(RM) $@
$(CP) $< $@
# Use this file to only change when obvious things have changed
$(BUILD_DIR_ROOT)/.bridge2configureOptsLatest: FRC
$(RM) $@.tmp
$(MKDIR) -p $(BUILD_DIR_ROOT)
@$(ECHO) " --with-debug-level=$(if $(DEBUG_LEVEL),$(DEBUG_LEVEL),release) " >> $@.tmp
ifdef ARCH_DATA_MODEL
@$(ECHO) " --with-target-bits=$(ARCH_DATA_MODEL) " >> $@.tmp
endif
ifeq ($(ARCH_DATA_MODEL),32)
@$(ECHO) " --with-jvm-variants=client,server " >> $@.tmp
endif
ifdef ALT_PARALLEL_COMPILE_JOBS
@$(ECHO) " --with-num-cores=$(ALT_PARALLEL_COMPILE_JOBS) " >> $@.tmp
endif
ifdef ALT_BOOTDIR
@$(ECHO) " --with-boot-jdk=$(call UnixPath,$(ALT_BOOTDIR)) " >> $@.tmp
endif
ifdef ALT_CUPS_HEADERS_PATH
@$(ECHO) " --with-cups-include=$(call UnixPath,$(ALT_CUPS_HEADERS_PATH)) " >> $@.tmp
endif
ifdef ALT_FREETYPE_HEADERS_PATH
@$(ECHO) " --with-freetype=$(call UnixPath,$(ALT_FREETYPE_HEADERS_PATH)/..) " >> $@.tmp
endif
ifdef OPENJDK
@$(ECHO) " --enable-openjdk-only " >> $@.tmp
endif
# Todo: move to closed?
ifdef ALT_MOZILLA_HEADERS_PATH
@$(ECHO) " --with-mozilla-headers=$(call UnixPath,$(ALT_MOZILLA_HEADERS_PATH)) " >> $@.tmp
endif
ifdef ALT_JUNIT_DIR
@$(ECHO) " --with-junit-dir=$(call UnixPath,$(ALT_JUNIT_DIR)) " >> $@.tmp
endif
ifdef ANT_HOME
@$(ECHO) " --with-ant-home=$(call UnixPath,$(ANT_HOME)) " >> $@.tmp
endif
ifdef ALT_SLASH_JAVA
@$(ECHO) " --with-java-devtools=$(call UnixPath,$(ALT_SLASH_JAVA)/devtools) " >> $@.tmp
endif
@if [ -f $@ ] ; then \
if ! $(CMP) $@ $@.tmp > /dev/null ; then \
$(CP) $@.tmp $@ ; \
fi ; \
else \
$(CP) $@.tmp $@ ; \
fi
$(RM) $@.tmp
PHONY_LIST += bridge2configure bridgeBuild
###########################################################################
# JPRT targets
ifndef JPRT_ARCHIVE_BUNDLE
JPRT_ARCHIVE_BUNDLE=/tmp/jprt_bundles/j2sdk-image.zip
endif
# These targets execute in a SPEC free context, before calling bridgeBuild
# to generate the SPEC.
jprt_build_product: DEBUG_LEVEL=release
jprt_build_product: BUILD_DIRNAME=*-release
jprt_build_product: jprt_build_generic
jprt_build_fastdebug: DEBUG_LEVEL=fastdebug
jprt_build_fastdebug: BUILD_DIRNAME=*-fastdebug
jprt_build_fastdebug: jprt_build_generic
jprt_build_debug: DEBUG_LEVEL=slowdebug
jprt_build_debug: BUILD_DIRNAME=*-debug
jprt_build_debug: jprt_build_generic
jprt_build_generic: BRIDGE_TARGETS+=jprt_bundle
jprt_build_generic: bridgeBuild
# This target must be called in the context of a SPEC file
jprt_bundle: $(JPRT_ARCHIVE_BUNDLE)
@$(call CheckIfMakeAtEnd)
# This target must be called in the context of a SPEC file
$(JPRT_ARCHIVE_BUNDLE): bundles
$(MKDIR) -p $(@D)
$(RM) $@
$(CP) $(BUILD_OUTPUT)/bundles/j2sdk-image.zip $@
# This target must be called in the context of a SPEC file
bundles: all
@$(call TargetEnter)
$(MKDIR) -p $(BUILD_OUTPUT)/bundles
$(CD) $(IMAGES_OUTPUTDIR)/j2sdk-image && $(ZIP) -q -r $(BUILD_OUTPUT)/bundles/j2sdk-image.zip .
$(CD) $(IMAGES_OUTPUTDIR)/j2re-image && $(ZIP) -q -r $(BUILD_OUTPUT)/bundles/j2re-image.zip .
@$(call TargetExit)
# Keep track of phony targets
PHONY_LIST += jprt_build_product jprt_build_fastdebug jprt_build_debug \
jprt_build_generic bundles jprt_bundle
###########################################################################
# Phony targets
.PHONY: $(PHONY_LIST)
# Force target
FRC:
common/makefiles/Main.gmk
浏览文件 @ 41695d56
......@@ -65,7 +65,11 @@ MAKE_ARGS:=$(MAKE_ARGS) -j$(JOBS)
### Main targets
all: jdk
default: jdk
@$(call CheckIfMakeAtEnd)
all: images docs
@$(call CheckIfMakeAtEnd)
start-make:
@$(call AtMakeStart)
......@@ -126,12 +130,6 @@ overlay-images-only: start-make
@($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f BuildJdk.gmk overlay-images)
@$(call TargetExit)
bundles: images bundles-only
bundles-only: start-make
@$(call TargetEnter)
@($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f BuildJdk.gmk bundles)
@$(call TargetExit)
install: images install-only
install-only: start-make
@$(call TargetEnter)
......
common/makefiles/MakeHelpers.gmk
浏览文件 @ 41695d56
......@@ -50,7 +50,7 @@ BUILDTIMESDIR=$(OUTPUT_ROOT)/tmp/buildtimes
# Global targets are possible to run either with or without a SPEC. The prototypical
# global target is "help".
global_targets=help configure
global_targets=help jprt% bridgeBuild
##############################
# Functions
......@@ -112,7 +112,7 @@ endef
# Do not indent this function, this will add whitespace at the start which the caller won't handle
define GetRealTarget
$(strip $(if $(MAKECMDGOALS),$(MAKECMDGOALS),all))
$(strip $(if $(MAKECMDGOALS),$(MAKECMDGOALS),default))
endef
# Do not indent this function, this will add whitespace at the start which the caller won't handle
......@@ -126,10 +126,7 @@ define CheckIfMakeAtEnd
# Check if the current target is the last goal
$(if $(filter $@,$(call LastGoal)),$(call AtMakeEnd))
# If the target is 'foo-only', check if our goal was stated as 'foo'
$(if $(filter $(patsubst %-only,%,$@),$(call LastGoal)),$(call AtMakeEnd))
# If no goal is given, 'all' is default, but the last target executed for all is 'jdk-only'. Check for that, too.
# At most one of the tests can be true.
$(if $(subst all,,$(call LastGoal)),,$(if $(filter $@,jdk-only),$(call AtMakeEnd)))
$(if $(filter $@,$(call LastGoal)-only),$(call AtMakeEnd))
endef
# Hook to be called when starting to execute a top-level target
......
common/makefiles/Makefile
浏览文件 @ 41695d56
......@@ -23,109 +23,4 @@
# questions.
#
# This must be the first rule
all:
# Inclusion of this pseudo-target will cause make to execute this file
# serially, regardless of -j. Recursively called makefiles will not be
# affected, however. This is required for correct dependency management.
.NOTPARALLEL:
# The shell code below will be executed on /usr/ccs/bin/make on Solaris, but not in GNU make.
# /usr/ccs/bin/make lacks basically every other flow control mechanism.
TEST_FOR_NON_GNUMAKE:sh=echo You are not using GNU make/gmake, this is a requirement. Check your path. 1>&2 && exit 1
# Assume we have GNU make, but check version.
ifeq (,$(findstring 3.81,$(MAKE_VERSION)))
ifeq (,$(findstring 3.82,$(MAKE_VERSION)))
$(error This version of GNU Make is too low ($(MAKE_VERSION)). Check your path, or upgrade to 3.81 or newer.)
endif
endif
# Locate this Makefile
ifeq ($(filter /%,$(lastword $(MAKEFILE_LIST))),)
makefile_path:=$(CURDIR)/$(lastword $(MAKEFILE_LIST))
else
makefile_path:=$(lastword $(MAKEFILE_LIST))
endif
root_dir:=$(patsubst %/common/makefiles/Makefile,%,$(makefile_path))
# ... and then we can include our helper functions
include $(dir $(makefile_path))/MakeHelpers.gmk
$(eval $(call ParseLogLevel))
$(eval $(call ParseConfAndSpec))
# Now determine if we have zero, one or several configurations to build.
ifeq ($(SPEC),)
# Since we got past ParseConfAndSpec, we must be building a global target. Do nothing.
else
ifeq ($(words $(SPEC)),1)
# We are building a single configuration. This is the normal case. Execute the Main.gmk file.
include $(dir $(makefile_path))/Main.gmk
else
# We are building multiple configurations.
# First, find out the valid targets
# Run the makefile with an arbitraty SPEC using -p -q (quiet dry-run and dump rules) to find
# available PHONY targets. Use this list as valid targets to pass on to the repeated calls.
all_phony_targets=$(filter-out $(global_targets), $(strip $(shell \
$(MAKE) -p -q -f $(makefile_path) SPEC=$(firstword $(SPEC)) | \
grep ^.PHONY: | head -n 1 | cut -d " " -f 2-)))
$(all_phony_targets):
@$(foreach spec,$(SPEC),($(MAKE) -f $(makefile_path) SPEC=$(spec) $(VERBOSE) VERBOSE=$(VERBOSE) $@) &&) true
endif
endif
# Here are "global" targets, i.e. targets that can be executed without specifying a single configuration.
# If you addd more global targets, please update the variable global_targets in MakeHelpers.
help:
$(info )
$(info OpenJDK Makefile help)
$(info =====================)
$(info )
$(info Common make targets)
$(info . make [all] # Compile all code but do not create images)
$(info . make images # Create complete j2sdk and j2re images)
$(info . make overlay-images # Create limited images for sparc 64 bit platforms)
$(info . make bootcycle-images # Build images twice, second time with newly build JDK)
$(info . make install # Install the generated images locally)
$(info . make clean # Remove all files generated by make, but not those)
$(info . # generated by configure)
$(info . make dist-clean # Remove all files, including configuration)
$(info . make help # Give some help on using make)
$(info . make test # Run tests, default is all tests (see TEST below))
$(info )
$(info Targets for specific components)
$(info (Component is any of langtools, corba, jaxp, jaxws, hotspot, jdk, images or overlay-images))
$(info . make <component> # Build <component> and everything it depends on. )
$(info . make <component>-only # Build <component> only, without dependencies. This)
$(info . # is faster but can result in incorrect build results!)
$(info . make clean-<component> # Remove files generated by make for <component>)
$(info )
$(info Useful make variables)
$(info . make CONF= # Build all configurations (note, assignment is empty))
$(info . make CONF=<substring> # Build the configuration(s) with a name matching)
$(info . # <substring>)
$(info )
$(info . make LOG=<loglevel> # Change the log level from warn to <loglevel>)
$(info . # Available log levels are:)
$(info . # 'warn' (default), 'info', 'debug' and 'trace')
$(info . # To see executed command lines, use LOG=debug)
$(info )
$(info . make JOBS=<n> # Run <n> parallel make jobs)
$(info . # Note that -jN does not work as expected!)
$(info )
$(info . make test TEST=<test> # Only run the given test or tests, e.g.)
$(info . # make test TEST="jdk_lang jdk_net")
$(info )
configure:
@$(SHELL) $(root_dir)/configure $(CONFIGURE_ARGS)
@echo ====================================================
@echo "Note: This is a non-recommended way of running configure."
@echo "Instead, run 'sh configure' in the top-level directory"
.PHONY: help configure
include ../../NewMakefile.gmk
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或