This is effectively a revert of 4573388c.

Forcing a display active when there is none causes problems with
dpm on some SI boards which results in improperly initialized
dpm state and boot failures on some boards.  As for the bug commit
4573388c tried to address, one can manually force the state to
high for better performance when using the card as a headless compute
node until a better fix is developed.

bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=73788
https://bugs.freedesktop.org/show_bug.cgi?id=69395Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
cc: stable@vger.kernel.org

DCE5 and newer hardware only has 1 DAC.  Use the correct
offset.  This may fix display problems on certain board
configurations.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

If we are not able to properly initialize one of the gpu
engines for buffer paging, we limit vram to the size of
the cpu visible aperture.  We generally either use the gfx
or dma engine to do this.  Clean up the size limiting code
to only adjust the size based on what ring is selected
for buffer paging rather than making assumptions about which
engine is selected for paging.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

The hw is buggy and it's not currently used, but it's
currently still initialized by the driver.  Skip the init.
Skipping init also seems to improve stability with dpm on
some r6xx asics.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=66963Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Prevent runtime suspend of non-PX GPUs.  Runtime suspend is
not what we want in those cases.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise we allocate a new VMID on nearly every submit.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drm/tegra: Changes for v3.14-rc1 (update)

These patches fix some issues caused by the DRM panel support from the
previous pull request and add two more panels (for the Toshiba AC100 as
well as the Seaboard and Ventana).

* tag 'drm/for-3.14-rc1-20140123' of git://anongit.freedesktop.org/tegra/linux:
  drm/tegra: Obtain head number from DT
  drm/panel: update EDID BLOB in panel_simple_get_modes()
  gpu: host1x: Remove unnecessary include
  drm/tegra: Use proper data type
  drm/tegra: Clarify how panel modes override others
  drm/tegra: Fix possible CRTC mask for RGB outputs
  drm/i915: Use drm_encoder_crtc_ok()
  drm: Move drm_encoder_crtc_ok() to core
  drm: provide a helper for the encoder possible_crtcs mask
  drm/tegra: Don't check resource with devm_ioremap_resource()
  drm/panel: Add support for Chunghwa CLAA101WA01A panel
  drm/panel: Add support for Samsung LTN101NT05 panel

these 3 were checking in_interrupt but we have situations where
calling vunmap under this could cause a BUG to be hit in
smp_call_function_many. Use the drm_can_sleep macro instead,
which should stop this path from been taken in this case.

Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Merge tag 'drm-intel-fixes-2014-01-28' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

Pile of -fixes all over the place. Lot's of cc: stable.

Only big thing is that we've dropped the preliminary hw support tag for
bdw - it seems to work. Which also means that I'll shovel a few more bdw
patches through -fixes, there's 5 w/a patches from Ken already on
intel-gfx.

* tag 'drm-intel-fixes-2014-01-28' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: Fix the offset issue for the stolen GEM objects
  drm/i915: Decouple GPU error reporting from ring initialisation
  i915: remove pm_qos request on error
  Revert "drm/i915: Mask reserved bits in display/sprite address registers"
  drm/i915: VLV2 - Fix hotplug detect bits
  drm/i915: Allow reading the TIMESTAMP register on Gen8.
  drm/i915: Repeat evictions whilst pageflip completions are outstanding
  drm/i915: Wait for completion of pending flips when starved of fences
  drm/i915: don't disable DP port after a failed link training
  drm/i915: don't disable the DP port if the link is lost
  drm/i915: Eliminate lots of WARNs when there's no backlight present
  drm/i915: g4x/vlv: fix dp aux interrupt mask
  drm/i915/ppgtt: Defer request freeing on reset
  i915: send D1 opregion notification
  drm/i915/bdw: remove preliminary_hw_support flag from BDW
  drm/i915: Tune down reset_stat output from ERROR to debug
  drm/i915: Make semaphore modparam RO
  drm/i915: Fix disabled semaphores
  drm/i915: Clarify relocation errnos
  drm/i915: Spelling s/auxilliary/auxiliary/

Just one-liner which corrects a select statement for DRM_KMS_FB_HELPER
which looks like it was missed in the initial merge.  Based on 3.13.

* 'drm-armada-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox: (55 commits)
  DRM: armada: fix missing DRM_KMS_FB_HELPER select

omapdrm patches for 3.14

* tag 'omapdrm-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  drm/omap: Enable DT support for DMM
  drm/omap: fix: change dev_unload order
  drm/omap: fix: disable encoder before destroying it
  drm/omap: fix: disconnect devices when omapdrm module is removed
  drm/omap: fix: Defer probe if an omapdss device requests for it at connect
  drm/omap: fix (un)registering irqs inside an irq handler

Conflicts:
	drivers/gpu/drm/omapdrm/omap_drv.c

Only two patches this time around. One trivial and one locking fix.

* 'gma500-next' of git://github.com/patjak/drm-gma500:
  drm/gma500: Lock struct_mutex around cursor updates
  drivers: gpu: Mark function as static in cdv_intel_dp.c

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64361
Cc: <stable@vger.kernel.org>
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>

The 'offset' field of the 'scatterlist' structure was wrongly
programmed with the offset value from the base of stolen area,
whereas this field indicates the offset from where the interested
data starts within the first PAGE pointed to by 'scattterlist'
structure. As a result when a new GEM object allocated from stolen
area is mapped to GTT, it could lead to an overwrite of GTT entries
as the page count calculation will go wrong, refer the function
'sg_page_count'.

v2: Modified the commit message. (Chris)
Signed-off-by: NAkash Goel <akash.goel@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71908
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69104Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Commit 92b6f89f6b8f (drm: Add separate Kconfig option for fbdev helpers)
happened in parallel with the inclusion of Armada DRM into mainline,
and so missed this update.  Add the necessary select statement to avoid
build errors.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Currently we report through our error state only the rings that have
been initialised (as detected by ring->obj). This check is done after
the GPU reset and ring re-initialisation, which means that the software
state may not be the same as when we captured the hardware error and we
may not print out any of the vital information for debugging the hang.

This (and the implied object leak) is a regression from

commit 3d57e5bd
Author: Ben Widawsky <ben@bwidawsk.net>
Date:   Mon Oct 14 10:01:36 2013 -0700

    drm/i915: Do a fuller init after reset

Note that we are already starting to get bug reports with incomplete
error states from 3.13, which also hampers debugging userspace driver
issues.

v2: Prevent a NULL dereference on 830gm/845g after a GPU reset where
    the scratch obj may be NULL.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=74094
Cc: stable@vger.kernel.org # please don't delay since it's a
vital support/debug feature for the intel gfx stack in general
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Add a bit of fluff to make it clear we need this expedited in
stable.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Not removing pm qos request and free memory for it can cause crash,
when some other driver use pm qos. For example, this oops:

BUG: unable to handle kernel paging request at fffffffffffffff8
IP: [<ffffffff81307a6b>] plist_add+0x5b/0xd0
Call Trace:
 [<ffffffff810acf25>] pm_qos_update_target+0x125/0x1e0
 [<ffffffff810ad071>] pm_qos_add_request+0x91/0x100
 [<ffffffffa053ec14>] e1000_open+0xe4/0x5b0 [e1000e]

was caused by earlier i915 probe failure:

[drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[drm:init_ring_common] *ERROR* render ring initialization failed ctl 0001f001 head 00003004 tail 00000000 start 00003000
[drm:i915_driver_load] *ERROR* failed to init modeset
i915: probe of 0000:00:02.0 failed with error -5

Bug report:
http://bugzilla.redhat.com/show_bug.cgi?id=1057533Reported-by: NGiandomenico De Tullio <ghisha@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
[danvet: Drop unnecessary code movement.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This reverts commit 446f2545.

I've left the masking in the pageflip code since that seems to be some
useful piece of preemptive robustness.

Iirc I've merged this patch under the assumption that the BIOS leaves
some random gunk in the lower bits and gets unhappy if we trample on
them. We have quite a few case like this, so this made sense.

Now I've just learned that there's actual hardware features bits in
the low 12 bits, and the kernel needs to preserve them to allow a
userspace blob to do its job. Given Dave Airlie's clear stance on
userspace blob drivers I've quickly chatted with him and he doesn't
seem too happy. So let's revert this.

If there are indeed bits that we must preserve in this range then we
can ressurrect this patch, but with proper documentation for those
bits supplied. And we probably also need to think a bit about
interactions with our driver.

Cc: Armin Reese <armin.c.reese@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Dave Airlie <airlied@linux.ie>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The head number of a given display controller is fixed in hardware and
required to program outputs appropriately. Relying on the driver probe
order to determine this number will not work, since that could yield a
situation where the second head was probed first and would be assigned
head number 0 instead of 1.

By explicitly specifying the head number in the device tree, it is no
longer necessary to rely on these assumptions. As a fallback, if the
property isn't available, derive the head number from the display
controller node's position in the device tree. That's somewhat more
reliable than the previous default but not a proper solution.
Tested-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

Add new definitions for hotplug live status bits for VLV2 since they're
in reverse order from the gen4x ones.

Changelog:
- Restored gen4 bit definitions
- Added new definitions for VLV2
- Added platform check for IS_VALLEYVIEW() in dp_detect to use the correct
  bit defintions
- Replaced a lost trailing brace for the added switch()
Signed-off-by: NTodd Previte <tprevite@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73951
[danvet: Switch to _VLV postfix instead of prefix and regroupg
comments again so that the g4x warning is right next to those defines.
Also add a _G4X suffix for those special ones. Also cc stable.]
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next

Summary:
- GK110/GK208 acceleration
- loads more work towards pm, though, still behind a disable wall for now
- error reporting improvements from both Ilia and myself
- more old-school overlay improvements from Ilia
- misc other bits and pieces

* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (68 commits)
  drm/nouveau: call drm_vblank_cleanup() earlier
  drm/nouveau: create base display from common code
  drm/nv50/gr: print mpc trap name when it's not an mp trap
  drm/nv50/gr: update list of mp errors, make it a bitfield
  drm/nv50/gr: add more trap names to print on error
  drm/nouveau/devinit: lock/unlock crtc regs for all devices, not just pre-nv50
  drm/nouveau: hold mutex while syncing to kernel channel
  drm/nv50-/devinit: prevent use of engines marked as disabled by hw/vbios
  drm/nouveau/device: provide a way for devinit to mark engines as disabled
  drm/nouveau/devinit: tidy up the subdev class definition
  drm/nouveau/bar: tidy up the subdev and object class definitions
  drm/nouveau/instmem: tidy up the object class definition
  drm/nouveau/instmem: tidy up the subdev class definition
  drm/nouveau/pwr: implement a simple i2c stack
  drm/nouveau/pwr: have rd/wr32 routines clobber data instead of addr
  drm/nve0/fb: turn off some bits in 10f584 at init
  drm/nve0/fb/gddr5: merge a fix from ddr3 for one of the timing settings
  drm/nve0/fb/gddr5: yet another random 10f200 bit
  drm/nvc0-/fb: hook up skeleton interrupt handler
  drm/nve0/fb/gddr5: more 10f200 stuff
  ...

Fixes a NULL-ptr deref seen on module unload sometimes.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>

Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>

Also avoids printing the errors bitfield if that information has already
been shown.
Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>

Also make nv_lockvgac work for nv50+ devices. This should fix
IO_CONDITION and related VBIOS opcodes that read/write the crtc regs.

See https://bugs.freedesktop.org/show_bug.cgi?id=60680Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Not holding the mutex potentially causes corruption of the kernel
channel when page flipping.

Cc: stable@vger.kernel.org #3.13
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Reviewed-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Titan.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>