- 19 6月, 2015 3 次提交
-
-
由 Daniel Thompson 提交于
gem_prime_map is not currently described in the DRM manual, lets document it. Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Chris Wilson 提交于
As the clflush operates on cache lines, and we can flush any byte address, in order to flush all bytes given in the range we issue an extra clflush on the last byte to ensure the last cacheline is flushed. We can can the iteration to be over the actual cache lines to avoid this double clflush on the last byte. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: NImre Deak <imre.deak@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Daniel Vetter 提交于
We use the same check already in the atomic core, so might as well make this official. And it's also reused in e.g. i915. Motivated by Maarten's idea to extract a connector_changed state out of mode_changed. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-By: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
-
- 15 6月, 2015 2 次提交
-
-
由 Magnus Damm 提交于
Fix warnings related to size_t when building for 64-bit architectures: drivers/gpu/drm/drm_gem_cma_helper.c: In function ‘drm_gem_cma_create’: drivers/gpu/drm/drm_gem_cma_helper.c:114:4: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘size_t’ [-Wformat=] size); ^ drivers/gpu/drm/drm_gem_cma_helper.c: In function ‘drm_gem_cma_describe’: drivers/gpu/drm/drm_gem_cma_helper.c:393:4: warning: format ‘%d’ expects argument of type ‘int’, but argument 8 has type ‘size_t’ [-Wformat=] off, &cma_obj->paddr, cma_obj->vaddr, obj->size); Signed-off-by: NMagnus Damm <damm+renesas@opensource.se> Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Sonika Jindal 提交于
Moving rotation property to "Drm" and removing from i915 and omap. Also, adding description to the property Cc: DRI Development <dri-devel@lists.freedesktop.org> Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NSonika Jindal <sonika.jindal@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 12 6月, 2015 35 次提交
-
-
git://people.freedesktop.org/~robclark/linux由 Dave Airlie 提交于
Main pull req for 4.2.. I think there will be a secondary pull-req.. I'd like to land the hdcp support patches, since all the review comments have been long since addressed, and they have been ready to merge for a couple release cycles now other than the scm dependency (which should be coming in through arm-soc tree for 4.2). So I am not including them in this initial pull req to avoid merge ordering issues. Main highlights: 1) adreno a306 support (for apq8x16 and upcoming dragonboard 410c) 2) various dsi bits 3) various 64bit fixes (mostly warnings) 4) NV12MT support, pulled in via msm-next rather than drm-misc since dependency on on regenerated envytools headers (but lgtm'd-by danvet) 5) random fixes and cleanups * 'msm-next' of git://people.freedesktop.org/~robclark/linux: (36 commits) drm/msm: restart queued submits after hang drm/msm: fix timeout calculation drm/msm/hdmi: Use pinctrl in HDMI driver drm/msm/hdmi: Point to the right struct device drm/msm/mdp: Add support for more 32-bit RGB formats drm/msm: use __s32, __s64, __u32 and __u64 from linux/types.h for uabi drm/msm/atomic: Clean up planes in the error paths of .atomic_commit() drm/msm/mdp5: Always generate active-high sync signals for DSI drm/msm: dsi: fix compile errors when CONFIG_GPIOLIB=n drm/msm: use devm_gpiod_get_optional for optional reset gpio drm/msm/dsi: Separate PHY to another platform device drm/msm/dsi: Enable PLL driver in MSM DSI drm/msm/dsi: Add DSI PLL clock driver support drm/msm: use IS_ERR() to check regulator_get() return drm/msm: use IS_ERR() to check msm_ioremap() return drm/msm/mdp5: Wait for PP_DONE irq for command mode CRTC atomic commit drm/msm: Use customized function to wait for atomic commit done dt-bindings: Add MSM eDP controller documentation dt-bindings: Add MSM DSI controller documentation drm/msm: drop redundant debug output ...
-
由 Dave Airlie 提交于
Merge tag 'drm-intel-next-fixes-2015-06-11' of git://anongit.freedesktop.org/drm-intel into drm-next firmware name fix * tag 'drm-intel-next-fixes-2015-06-11' of git://anongit.freedesktop.org/drm-intel: drm/i915/skl: Fix DMC API version in firmware file name
-
由 Dave Airlie 提交于
Merge tag 'drm-amdkfd-next-fixes-2015-06-10' of git://people.freedesktop.org/~gabbayo/linux into drm-next - Make the reset wavefronts action be per process per device instead of per process, because one device can be stuck but the other one won't be - Add some missing properties to the CZ device_info structure - Rename symbols to not have CONFIG_ prefix - Some more cleanups and debug prints * tag 'drm-amdkfd-next-fixes-2015-06-10' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: remove not used defines from cik_regs.h drm/amdkfd: Add missing properties to CZ device info drm/amdkfd: make reset wavefronts per process per device drm/amdkfd: add debug print to kfd_events.c drm/amdkfd: avoid CONFIG_ prefix for non-Kconfig symbols
-
由 Dave Airlie 提交于
Merge branch '2015-06-08-st-drm-next' of http://git.linaro.org/people/benjamin.gaignard/kernel into drm-next Mainly it is fixing timing on HDMI to be compliant with CEA-861E spec. * '2015-06-08-st-drm-next' of http://git.linaro.org/people/benjamin.gaignard/kernel: drm/sti: vtg fix CEA-861E video format timing error drm/sti: hdmi fix CEA-861E video format timing error drm/sti: VTG interrupt names are badly displayed drm/sti: missing first pixel column on HDMI display drm/sti: correctly test devm_ioremap() return
-
由 Rob Clark 提交于
Track the list of in-flight submits. If the gpu hangs, retire up to an including the offending submit, and then re-submit the remainder. This way, for concurrently running piglit tests (for example), one failing test doesn't cause unrelated tests to fail simply because it's submit was queued up after one that triggered a hang. Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Rob Clark 提交于
The 'timeout' value comes from userspace (CLOCK_MONOTONIC), but converting this directly to jiffies doesn't take into account the initial jiffies count at boot, which may differ from the base time of CLOCK_MONOTONIC. TODO: add ktime_delta_jiffies() when rebasing on 4.1 and use that instead of ktime_sub/ktime_to_timespec/timespec_to_jiffies combo (as suggested by Arnd) v2: switch over from 'struct timespec' to ktime_t throughout, since 'struct timespec' will be deprecated (as suggested by Arnd) v3: minor cosmetic tweaks Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Stephane Viau 提交于
Some targets (eg: msm8994) use the pinctrl framework to configure interface pins. This change adds support for initialization and pinctrl active/sleep state control for the HDMI driver. Signed-off-by: NStephane Viau <sviau@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Stephane Viau 提交于
DRM device's dev (hdmi->dev->dev) points to the mdss_mdp device handle. Instead, we should get a reference to the mdss_hdmi handle. Signed-off-by: NStephane Viau <sviau@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Stephane Viau 提交于
That will complete the lists of Alpha + RGB formats. Signed-off-by: NStephane Viau <sviau@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Mikko Rapeli 提交于
Fixes userspace compilation errors like: error: unknown type name ‘uint32_t’ Signed-off-by: NMikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Laurent Pinchart 提交于
When the .atomic_commit() handler fails, clean up planes previoulsy prepared by drm_atomic_helper_prepare_planes() with a call to drm_atomic_helper_cleanup_planes(). Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Hai Li 提交于
DSI video mode engine can only take active-high sync signals. This change prevents MDP5 sending active-low sync signals to DSI in any case. Signed-off-by: NHai Li <hali@codeaurora.org> Tested-by: NArchit Taneja <architt@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Brian Norris 提交于
I'm not sure where, exactly, but somewhere in here we must be relying on an implicit include. drivers/gpu/drm/msm/dsi/dsi_host.c: In function ‘dsi_host_init_panel_gpios’: drivers/gpu/drm/msm/dsi/dsi_host.c:1356:2: error: implicit declaration of function ‘devm_gpiod_get’ [-Werror=implicit-function-declaration] msm_host->disp_en_gpio = devm_gpiod_get(panel_device, ^ drivers/gpu/drm/msm/dsi/dsi_host.c:1356:25: warning: assignment makes pointer from integer without a cast [enabled by default] msm_host->disp_en_gpio = devm_gpiod_get(panel_device, ^ drivers/gpu/drm/msm/dsi/dsi_host.c:1364:3: error: implicit declaration of function ‘gpiod_direction_output’ [-Werror=implicit-function-declaration] ret = gpiod_direction_output(msm_host->disp_en_gpio, 0); ^ drivers/gpu/drm/msm/dsi/dsi_host.c:1371:20: warning: assignment makes pointer from integer without a cast [enabled by default] msm_host->te_gpio = devm_gpiod_get(panel_device, "disp-te"); ^ drivers/gpu/drm/msm/dsi/dsi_host.c:1378:3: error: implicit declaration of function ‘gpiod_direction_input’ [-Werror=implicit-function-declaration] ret = gpiod_direction_input(msm_host->te_gpio); ^ drivers/gpu/drm/msm/dsi/dsi_host.c: In function ‘msm_dsi_host_power_on’: drivers/gpu/drm/msm/dsi/dsi_host.c:1918:3: error: implicit declaration of function ‘gpiod_set_value’ [-Werror=implicit-function-declaration] gpiod_set_value(msm_host->disp_en_gpio, 1); ^ Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Rob Clark <robdclark@gmail.com> Cc: Hai Li <hali@codeaurora.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Uwe Kleine-König 提交于
Since 39b2bbe3 (gpio: add flags argument to gpiod_get*() functions) which appeared in v3.17-rc1, the gpiod_get* functions take an additional parameter that allows to specify direction and initial value for output. Also there is a variant to find optional gpios that returns NULL if there is no gpio instead of -ENOENT. Make use of both features to simplify the driver. This makes error checking more strict because errors like -ENOSYS ("no gpio support compiled in") or -EPROBE_DEFER ("gpio not ready yet") are handled correctly now. Furthermore this is one caller less that stops us making the flags argument to gpiod_get*() mandatory. Reviewed-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Hai Li 提交于
There are different types of PHY from one chipset to another, while the DSI host controller is relatively consistent across platforms. Also, the PLL inside PHY is providing the source of DSI byte and pixel clocks, which are used by DSI host controller. Separated devices for clock provider and clock consumer make DSI driver better fit into common clock framework. Signed-off-by: NHai Li <hali@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Hai Li 提交于
This change activates PLL driver for DSI to work with common clock framework. Signed-off-by: NHai Li <hali@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Hai Li 提交于
DSI byte clock and pixel clocks are sourced from DSI PLL. This change adds the DSI PLL source clock driver under common clock framework. This change handles DSI 28nm PLL only. Signed-off-by: NHai Li <hali@codeaurora.org> Signed-off-by: NArchit Taneja <architt@codeaurora.org> Signed-off-by: NStephane Viau <sviau@codeaurora.org> Signed-off-by: NWentao Xu <wentaox@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Fabian Frederick 提交于
regulator_get() never returns NULL. There's no need for IS_ERR_OR_NULL() Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Fabian Frederick 提交于
msm_ioremap() never returns NULL. There's no need for IS_ERR_OR_NULL() Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Hai Li 提交于
CRTCs in DSI command mode data path should wait for pingpong done, instead of vblank, to finish atomic commit. This change is to enable PP_DONE irq on command mode CRTCs and wait for this irq happens before atomic commit completion. Signed-off-by: NHai Li <hali@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Hai Li 提交于
MDP FLUSH registers could indicate if the previous flush updates has taken effect at vsync boundary. Making use of this H/W feature can catch the vsync that happened between CRTC atomic_flush and *_wait_for_vblanks, to avoid unnecessary wait. This change allows kms CRTCs to use their own *_wait_for_commit_done functions to wait for FLUSH register cleared at vsync, before commit completion. Signed-off-by: NHai Li <hali@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Hai Li 提交于
Signed-off-by: NHai Li <hali@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Hai Li 提交于
Signed-off-by: NHai Li <hali@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Nicholas Mc Guire 提交于
wait_for_completion_timeout returns 0 in case of timeout and never return < 0 so there is no additional information in printing the value of time_left here as it will always be 0, thus it can be dropped. Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Nicholas Mc Guire 提交于
wait_for_completion_timeout returns >= 0 but never negative - so the error check should be against equality to 0 not <= 0. Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Nicholas Mc Guire 提交于
return type of wait_for_completion_timeout is unsigned long not int, this patch assigns the return value of wait_for_completion_timeout to an appropriately typed and named variable. Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Archit Taneja 提交于
Some DSI peripherals rely on the HS clock on DSI clock lane as their clock source. If the clock lane transitions between HS and LP states, it can disrupt the functioning of such peripherals. The mipi dsi mode flag MIPI_DSI_CLOCK_NON_CONTINUOUS already exists for such peripheral drivers. Use it to configure the bit CLKLN_HS_FORCE_REQUEST in DSI_LANE_CTRL. Signed-off-by: NArchit Taneja <architt@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 jilai wang 提交于
If the GEM object is imported, drm_prime_gem_destroy needs to be called to clean up dma buffer related information. Signed-off-by: NJilai Wang <jilaiw@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Rob Clark 提交于
Fix build warning when building edp/edp_aux.o due to missing prototype for edp_aux_transfer. This function is only used in edp_aux.c so just make it static. Reported-by: NNicholas Mc Guire <hofrat@osadl.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Nicholas Mc Guire 提交于
wait_for_completion_timeout returns 0 in case of timeout so printing the return value here will always yield 0 and is therefor redundant - dropped. Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Nicholas Mc Guire 提交于
The timeout is passed as a constant which makes it HZ dependent because jiffies are expected so it should be converted to jiffies. The actual value is not clear from the code - my best guess is that this should be 300 milliseconds given that other timeouts are in milliseconds based on looking at other drm drivers (e.g. exynos_drm_dsi.c:356 300ms, tegra/dpaux.c:188 250ms) - this needs to be confirmed by someone who knows the details of the driver. Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Nicholas Mc Guire 提交于
wait_for_completion_timeout return >= 0 but never negative so the check logic looks inconsistent. Further the return value of wait_for_completion_timeout was being passed up the call chain but the x call sites as drm_dp_i2c_do_msg()/drm_dp_dpcd_access() check for < 0 thus timeout was being treated as success case. <snip> drivers/gpu/drm/drm_dp_helper.c:drm_dp_i2c_do_msg() mutex_lock(&aux->hw_mutex); ret = aux->transfer(aux, msg); mutex_unlock(&aux->hw_mutex); if (ret < 0) { <snip> logic in edp_aux_transfer() seems incorrect as it could return 0 (timeout) but checks of <= 0 to indicate error so the return probably should be -ETIMEDOUT in case wait_for_completion_timeout returns 0 (timeout occurred). Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Rob Clark 提交于
Seems like disable can race with complete_flip() in process of disabling a crtc, leading to: [ 49.065364] Call trace: [ 49.071441] [<ffffffc00041d5a0>] mdp5_ctl_blend+0x20/0x1c0 [ 49.073788] [<ffffffc00041ebcc>] mdp5_crtc_disable+0x3c/0xa8 [ 49.079348] [<ffffffc0003e7854>] disable_outputs.isra.4+0x11c/0x220 [ 49.085164] [<ffffffc0003e7afc>] drm_atomic_helper_commit_modeset_disables+0x14/0x38 [ 49.091155] [<ffffffc000425c80>] complete_commit+0x40/0xb8 [ 49.099136] [<ffffffc0004260ac>] msm_atomic_commit+0x364/0x398 [ 49.104430] [<ffffffc00040a614>] drm_atomic_commit+0x3c/0x70 [ 49.110249] [<ffffffc0003e67b8>] drm_atomic_helper_set_config+0x1b0/0x3e0 [ 49.116065] [<ffffffc0003f99bc>] drm_mode_set_config_internal+0x64/0xf8 [ 49.122746] [<ffffffc0003fa624>] drm_framebuffer_remove+0xe4/0x128 [ 49.129171] [<ffffffc0003feaf8>] drm_mode_rmfb+0xc0/0x100 [ 49.135420] [<ffffffc0003efba8>] drm_ioctl+0x258/0x4d0 [ 49.140889] [<ffffffc0001b0388>] do_vfs_ioctl+0x338/0x5d0 [ 49.145921] [<ffffffc0001b06a8>] SyS_ioctl+0x88/0xa0 It makes no sense to free the ctl without disabling all stages, so lets just move them together to avoid the crash. Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Rob Clark 提交于
Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Rob Clark 提交于
As found in apq8016 (used in DragonBoard 410c) and msm8916. Note that numerically a306 is actually 307 (since a305c already claimed 306). Nice and confusing. Signed-off-by: NRob Clark <robdclark@gmail.com>
-