- 14 10月, 2007 24 次提交
-
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] SMP: Fix use of cpumasks. [MIPS] Revert "[MIPS] tlbex.c: Cleanup __init usage." [MIPS] CFE: Add missing parenthesis.
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (27 commits) alim15x3: remove redundant m5229_revision check sc1200: fix ->dma_base equal zero handling cs5520: fix ->dma_base equal zero handling sgiioc4: add missing ->dma_base check cs5535: add missing ->dma_base check ide: remove CONFIG_IDEDMA_IVB config option ide: change master/slave IDENTIFY order ide: move ide_config_drive_speed() calls to upper layers (take 2) pdc202xx_new: check ide_config_drive_speed() return value cs5535: check ide_config_drive_speed() return value amd74xx/via82cxxx: check ide_config_drive_speed() return value au1xxx: fix au1xxx_set_pio_mode() icside: use ide_tune_dma() ide-pmac: fix PIO setup and enable autotune ide-pmac: use ide_tune_dma() (take 2) ide-pmac: remove pmac_ide_do_setfeature() (take 2) ide-pmac: remove nIEN clearing from pmac_ide_do_setfeature() ide-pmac: use __ide_wait_stat() ide-pmac: remove extra good status wait from pmac_ide_do_setfeature() ide: add __ide_wait_stat() helper ...
-
git://git.infradead.org/mtd-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/mtd-2.6: (91 commits) [MTD] [NAND] Blackfin on-chip NAND Flash Controller driver [MTD] [NOR] fix ctrl-alt-del can't reboot for intel flash bug [MTD] [NAND] Fix compiler warning in Alauda driver [JFFS2] Remove stray debugging printk [JFFS2] Handle dirents on the flash with embedded zero bytes in names. [JFFS2] Check for creation of dirents with embedded zero bytes in name. [JFFS2] Don't count all 'very dirty' blocks except in debug mode [JFFS2] Check whether garbage-collection actually obsoleted its victim. [JFFS2] Relax threshold for triggering GC due to dirty blocks. [MTD] [OneNAND] Fix typo related with recent commit [JFFS2] Trigger garbage collection when very_dirty_list size becomes excessive [MTD] [NAND] Avoid deadlock in erase callback; release chip lock first. [MTD] [NAND] Resume method for CAFÉ NAND controller [MTD] [NAND] Fix PCI ident table for CAFÉ NAND controller. [MTD] [NAND] s3c2410: fix arch moves [MTD] [OneNAND] fix numerous races [MTD] map driver for NOR flash on the Intel Vermilion Range chipset [JFFS2] Fix unpoint length [MTD] fix CFI point method for discontiguous maps [MTD] MAPS: Merge Lubbock and Mainstone drivers into common PXA2xx driver ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (106 commits) KVM: Replace enum by #define KVM: Skip pio instruction when it is emulated, not executed KVM: x86 emulator: popf KVM: x86 emulator: fix src, dst value initialization KVM: x86 emulator: jmp abs KVM: x86 emulator: lea KVM: X86 emulator: jump conditional short KVM: x86 emulator: imlpement jump conditional relative KVM: x86 emulator: sort opcodes into ascending order KVM: Improve emulation failure reporting KVM: x86 emulator: pushf KVM: x86 emulator: call near KVM: x86 emulator: push imm8 KVM: VMX: Fix exit qualification width on i386 KVM: Move main vcpu loop into subarch independent code KVM: VMX: Move vm entry failure handling to the exit handler KVM: MMU: Don't do GFP_NOWAIT allocations KVM: Rename kvm_arch_ops to kvm_x86_ops KVM: Simplify memory allocation KVM: Hoist SVM's get_cs_db_l_bits into core code. ...
-
由 Dave Jones 提交于
Since the x86 merge, lots of files that referenced their own filenames are no longer correct. Rather than keep them up to date, just delete them, as they add no real value. Additionally: - fix up comment formatting in scx200_32.c - Remove a credit from myself in setup_64.c from a time when we had no SCM - remove longwinded history from tsc_32.c which can be figured out from git. Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
In commit 4665079c ("[NETNS]: Move some code into __init section when CONFIG_NET_NS=n") we got a new section - .exit.text.refok (more of 'let's tell modpost that some bogus calls are not bogus', a-la text.init.refok). Unfortunately, the commit in question forgot to add it to TEXT_TEXT, with rather amusing results. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
Breaks on any target that has copy_to_user() defined as a non-trivial macro. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
a) include/asm-um/arch can't just point to include/asm-$(SUBARCH) now b) arch/{i386,x86_64}/crypto are merged now c) subarch-obj needed changes d) cpufeature_64.h should pull "cpufeature_32.h", not <asm/cpufeature_32.h> since it can be included from asm-um/cpufeature.h e) in case of uml-i386 we need CONFIG_X86_32 for make and gcc, but not for Kconfig f) sysctl.c shouldn't do vdso_enabled for uml-i386 (actually, that one should be registered from corresponding arch/*/kernel/*, with ifdef going away; that's a separate patch, though). With that and with Stephen's patch ("[PATCH net-2.6] uml: hard_header fix") we have uml allmodconfig building both on i386 and amd64. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix networking code kernel-doc for newly added parameters. Warning(linux-2.6.23-git2//net/core/sock.c:879): No description found for parameter 'net' Warning(linux-2.6.23-git2//net/core/dev.c:570): No description found for parameter 'net' Warning(linux-2.6.23-git2//net/core/dev.c:594): No description found for parameter 'net' Warning(linux-2.6.23-git2//net/core/dev.c:617): No description found for parameter 'net' Warning(linux-2.6.23-git2//net/core/dev.c:641): No description found for parameter 'net' Warning(linux-2.6.23-git2//net/core/dev.c:667): No description found for parameter 'net' Warning(linux-2.6.23-git2//net/core/dev.c:722): No description found for parameter 'net' Warning(linux-2.6.23-git2//net/core/dev.c:959): No description found for parameter 'net' Warning(linux-2.6.23-git2//net/core/dev.c:1195): No description found for parameter 'dev' Warning(linux-2.6.23-git2//net/core/dev.c:2105): No description found for parameter 'n' Warning(linux-2.6.23-git2//net/core/dev.c:3272): No description found for parameter 'net' Warning(linux-2.6.23-git2//net/core/dev.c:3445): No description found for parameter 'net' Warning(linux-2.6.23-git2//include/linux/netdevice.h:1301): No description found for parameter 'cpu' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix docbook templates for new x86 path/filenames: docproc: linux-2.6.23-git2/include/asm-i386/mca_dma.h: No such file or directory Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix docbook templates for new x86 path/filenames. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix docbook templates for modified x86 path/filenames. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix docbook templates for new x86 path/filenames: docproc: linux-2.6.23-git2/include/asm-i386/io.h: No such file or directory Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh64-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh64-2.6: sh64: mach-cayman: Build fixes. sh64: Symbol export fixups. sh64: linker script tidying and alignment fixups. sh64: Set KBUILD_IMAGE to make the rpm target happy. sh64: Kill off obsolete linux/blk.h reference. sh64: cleanup struct irqaction initializers. sh64: Kill off dead gdb stub symbol. sh64: alphanumeric display only on Cayman. sh64: Add defconfigs for mach-sim and mach-harp. sh64: update cayman defconfig. sh64: Tidy up Kconfig dependencies. sh64: Move consistent DMA routines to arch/sh64/mm/. sh64: Some symbol exports and build fixes. sh64: mach-sim: Build fixes. sh64: mach-harp: Build fixes. sh64: Kill off duplicate frame pointer option. sh64: Kill off dead ROM-RAM and generic boards. sh64: Tidy up includes for Cayman board. sh64: Move *_p() I/O routine variants to io.h.
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (124 commits) sh: allow building for both r2d boards in same binary. sh: fix r2d board detection sh: Discard .exit.text/.exit.data at runtime. sh: Fix up some section alignments in linker script. sh: Fix SH-4 DMAC CHCR masking. sh: Rip out left-over nommu cond syscall cruft. sh: Make kgdb i-cache flushing less inept. sh: kgdb section mismatches and tidying. sh: cleanup struct irqaction initializers. sh: early_printk tidying. video: pvr2fb: Add TV (RGB) support to Dreamcast PVR driver. sh: Conditionalize gUSA support. sh: Follow gUSA preempt changes in __switch_to(). sh: Tidy up gUSA preempt handling. sh: __copy_user() optimizations for small copies. sh: clkfwk: Support multi-level clock propagation. sh: Fix URAM start address on SH7785. sh: Use boot_cpu_data for CPU probe. sh: Support extended mode TLB on SH-X3. sh: Bump MAX_ACTIVE_REGIONS for SH7785. ...
-
由 Geert Uytterhoeven 提交于
ssb bus needs <linux/io.h> linux/drivers/ssb/main.c: In function 'ssb_ssb_read16': linux/drivers/ssb/main.c:518: error: implicit declaration of function 'readw' linux/drivers/ssb/main.c: In function 'ssb_ssb_read32': linux/drivers/ssb/main.c:526: error: implicit declaration of function 'readl' linux/drivers/ssb/main.c: In function 'ssb_ssb_write16': linux/drivers/ssb/main.c:534: error: implicit declaration of function 'writew' linux/drivers/ssb/main.c: In function 'ssb_ssb_write32': linux/drivers/ssb/main.c:542: error: implicit declaration of function 'writel' Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
b43 wireless needs <linux/io.h> linux/drivers/net/wireless/b43/pio.h: In function 'b43_pio_write': linux/drivers/net/wireless/b43/pio.h:89: error: implicit declaration of function 'mmiowb' linux/drivers/net/wireless/b43/phy.c: In function 'b43_phy_write': linux/drivers/net/wireless/b43/phy.c:301: error: implicit declaration of function 'mmiowb' linuxdrivers/net/wireless/b43/sysfs.c: In function 'b43_attr_interfmode_store': linuxdrivers/net/wireless/b43/sysfs.c:147: error: implicit declaration of function 'mmiowb' Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
m68k: fix net drivers after recent get_stats updates Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
emc_endio returns void: linux/drivers/md/dm-emc.c: In function 'emc_endio': linux/drivers/md/dm-emc.c:58: warning: 'return' with a value, in function returning void Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Matthew Wilcox 提交于
libffi in GCC 4.2 needs cachectl.h to do its cache flushing. But we don't currently export it. I believe this patch should do the trick. Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
m68k: ignore restart_syscall, which is not needed on m68k. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
m68k: Atari keyboard ACIA driver cleanup: - removed dead key autorepeat code - removed hardcoded initial keymap Signed-off-by: NMichael Schmitz <schmitz@biophys.uni-duesseldorf.de> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
m68k: Atari input drivers cleanup: - memleak on failed init/register of input devices fixed - correct keycodes table (Atari keycodes are almost, but not entirely, equal to Linux keycodes). Signed-off-by: NMichael Schmitz <schmitz@biophys.uni-duesseldorf.de> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 10月, 2007 16 次提交
-
-
init_dma_ali15x3() guarantees that hwif->dma_base will never be set for m5229_revision < 0x20 so remove redundant m5229_revision >= 0x20 check from init_hwif_common_ali15x3(). While at it remove incorrect comment. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Set hwif->atapi_dma/{ultra,mwdma}_mask and drive->autodma after checking that ->dma_base exists. If ->dma_base is not set (== PCI BAR4 cannot be reserved) then DMA hooks shouldn't be initialized or bad things will happen. OTOH hwif->set_{pio,dma}_mode hooks should be set even if hwif->dma_base == 0. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Set hwif->ide_dma_{check,on} and hwif->autodma to 1 after checking that ->dma_base exists. If ->dma_base is not set (== PCI BAR4 cannot be reserved) then DMA hooks shouldn't be initialized or bad things will happen. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
If ->dma_base is not set (== PCI BAR4 cannot be reserved) then DMA hooks shouldn't be initialized or bad things will happen. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
If ->dma_base is not set (== PCI BAR4 cannot be reserved) then DMA hooks shouldn't be initialized or bad things will happen. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Devices which don't set word 93 validation bit should be now handled by ide-iops.c::ivb_list[] and for debugging purposes cable detection can be completely overriden with "idex=ata66" parameter. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Need to probe slave device first to make it release PDIAG- (this is required for correct device side cable detection). Based on libata commit f31f0cc2. Thanks to Craig for testing this patch. Cc: Craig Block <chblock3@yahoo.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Convert {ide_hwif_t,ide_pci_device_t}->host_flag to be u16. * Add IDE_HFLAG_POST_SET_MODE host flag to indicate the need to program the host for the transfer mode after programming the device. Set it in au1xxx-ide, amd74xx, cs5530, cs5535, pdc202xx_new, sc1200, pmac and via82cxxx host drivers. * Add IDE_HFLAG_NO_SET_MODE host flag to indicate the need to completely skip programming of host/device for the transfer mode ("smart" hosts). Set it in it821x host driver and check it in ide_tune_dma(). * Add ide_set_pio_mode()/ide_set_dma_mode() helpers and convert all direct ->set_pio_mode/->speedproc users to use these helpers. * Move ide_config_drive_speed() calls from ->set_pio_mode/->speedproc methods to callers. * Rename ->speedproc method to ->set_dma_mode, make it void and update all implementations accordingly. * Update ide_set_xfer_rate() comments. * Unexport ide_config_drive_speed(). v2: * Fix issues noticed by Sergei: - export ide_set_dma_mode() instead of moving ->set_pio_mode abuse wrt to setting DMA modes from sc1200_set_pio_mode() to do_special() - check IDE_HFLAG_NO_SET_MODE in ide_tune_dma() - check for (hwif->set_pio_mode) == NULL in ide_set_pio_mode() - check for (hwif->set_dma_mode) == NULL in ide_set_dma_mode() - return -1 from ide_set_{pio,dma}_mode() if ->set_{pio,dma}_mode == NULL - don't set ->set_{pio,dma}_mode on it821x in "smart" mode - fix build problem in pmac.c - minor fixes in au1xxx-ide.c/cs5530.c/siimage.c - improve patch description Changes in behavior caused by this patch: - HDIO_SET_PIO_MODE ioctl would now return -ENOSYS for attempts to change PIO mode if it821x controller is in "smart" mode - removal of two debugging printk-s (from cs5530.c and sc1200.c) - transfer modes 0x00-0x07 passed from user space may be programmed twice on the device (not really an issue since 0x00 is not supported correctly by any host driver ATM, 0x01 is not supported at all and 0x02-0x07 are invalid) Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Check ide_config_drive_speed() return value. * While at also call ide_config_drive_speed() if the transfer mode is XFER_PIO_SLOW (this case happens iff the transfer mode has already been set on the device by ide-proc.c::set_xfer_rate()) and remove redundant setting of ->{init,current}_speed. * Bump driver version. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Set transfer mode on the device before programming the host controller for the new timings (matches what auide_tune_chipset() is doing wrt DMA modes). Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add "good DMA drives" hack for icside to ide-dma.c::ide_find_dma_mode() (in the long-term it should be either removed or generalized for all hosts). * Use ide_tune_dma() in icside.c::icside_dma_check(). This results in the following changes in behavior: - pre-EIDE SWDMA modes are now also respected - drive->autodma is checked instead of hwif->autodma (doesn't really matter as icside sets both to "1") * Make ide-dma.c::__ide_dma_good_drive() static and drop "__" prefix. Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Benjamin Herrenschmidt 提交于
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add missing initialization of hwif->autodma and drive->autodma to pmac_ide_setup_dma(). * Use ide_tune_dma() in pmac_ide_dma_check(). While at it: * Fix pmac_ide_dma_check() return value if DMA mode is not programmed (should be "-1" otherwise ide_set_dma() will try to enable DMA). * Remove unnecessary drive->using_dma fiddling (->dma_off_quietly is always called before ide_set_dma() call and ide_set_dma() calls ->ide_dma_on if ->ide_dma_check returns "0"). v2: * No reason to blacklist all ide_floppy devices and the old code was always enabling DMA anyway (without even programming controller/device if the device was ide_floppy). Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Use ide_config_drive_speed() instead of pmac_ide_do_setfeature() and remove the latter, also ide-iops.c::__ide_wait_stat() could be static again. Since for IDE PMAC host driver IDE_CONTROL_REG is always true, device's ->quirk_list is always zero and ->ide_dma_host_{on,off} are nops than the only changes in behavior are: * if PIO mode is set then ->dma_off_queitly is called to disable DMA * if setting transfer mode fails ide_dump_status() is called to dump status v2: * IDE PMAC controllers allow separate PIO and DMA timings and PPC userland depends on this fact, and calls "hdparm -p" without calling "hdparm -d". Therefore to compensate for DMA being disabled by ide_config_drive_speed() for PIO modes: - add IDE_HFLAG_SET_PIO_MODE_KEEP_DMA flag and set it in PMAC host driver - add handling of the new flag to ide-io.c::do_special() Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-