If there is no running transaction in the fs, we needn't start a new one when
we want to start sync.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Since we have gotten the root in the caller, just pass it into
btrfs_ioctl_{start, wait}_sync() directly.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

If we found an invalid xattr dir item, we'd better try the next one instead.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

io_ctl_map_page is called by many functions in free-space-cache.
In most scenarios, the ->cur is not null, e.g. io_ctl_add_entry.
I think we'd better remove the warn_on here.
Signed-off-by: NWang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This is the commit that allows to start the device replace
procedure.

An ioctl() interface is added that supports starting and
canceling the device replace procedure, and to retrieve
the status and progress.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Make the target disk of a running device replace operation
available for reading. This is only used as a last ressort for
the defect repair procedure. And it is dependent on the location
of the data block to read, because during an ongoing device
replace operation, the target drive is only partially filled
with the filesystem data.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This change of the define is effective in all modes, it
is required and used only in the case when a device replace
procedure is running. The reason is that during an active
device replace procedure, the target device of the copy
operation is a mirror for the filesystem data as well that
can be used to read data in order to repair read errors on
other disks.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

It is desirable to be able to configure the device replace
procedure to avoid reading the source drive (the one to be
copied) whenever possible. This is useful when the number of
read errors on this disk is high, because it would delay the
copy procedure alot. Therefore there is an option to avoid
reading from the source disk unless the repair procedure
really needs to access it. The regular read req asks for
mapping the block with mirror_num == 0, in this case the
source disk is avoided whenever possible. The repair code
selects the mirror_num explicitly (mirror_num != 0), this
case is not changed by this commit.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

During a running dev replace operation, all write requests to
the live filesystem are duplicated to also write to the target
drive. Therefore btrfs_map_block() is changed to duplicate
stripes that are written to the source disk of a device replace
procedure to be written to the target disk as well.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Before this commit, btrfs_map_block() was called with REQ_WRITE
in order to retrieve the list of mirrors for a disk block.
This needs to be changed for the device replace procedure since
it makes a difference whether you are asking for read mirrors
or for locations to write to.
GET_READ_MIRRORS is introduced as a new interface to call
btrfs_map_block().
In the current commit, the functionality is not yet changed,
only the interface for GET_READ_MIRRORS is introduced and all
the places that should use this new interface are adapted.

The reason that REQ_WRITE cannot be abused anymore to retrieve
a list of read mirrors is that during a running dev replace
operation all write requests to the live filesystem are
duplicated to also write to the target drive.
Keep in mind that the target disk is only partially a valid
copy of the source disk while the operation is ongoing. All
writes go to the target disk, but not all reads would return
valid data on the target disk. Therefore it is not possible
anymore to abuse a REQ_WRITE interface to find valid mirrors
for a REQ_READ.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This commit contains all the essential changes to the core code
of Btrfs for support of the device replace procedure.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This adds a new file to the sources together with the header file
and the changes to ioctl.h and ctree.h that are required by the
new C source file. Additionally, 4 new functions are added to
volume.c that deal with device creation and destruction.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

The device replace procedure makes use of the scrub code. The scrub
code is the most efficient code to read the allocated data of a disk,
i.e. it reads sequentially in order to avoid disk head movements, it
skips unallocated blocks, it uses read ahead mechanisms, and it
contains all the code to detect and repair defects.
This commit adds code to scrub to allow the scrub code to copy read
data to another disk.
One goal is to be able to perform as fast as possible. Therefore the
write requests are collected until huge bios are built, and the
write process is decoupled from the read process with some kind of
flow control, of course, in order to limit the allocated memory.
The best performance on spinning disks could by reached when the
head movements are avoided as much as possible. Therefore a single
worker is used to interface the read process with the write process.
The regular scrub operation works as fast as before, it is not
negatively influenced and actually it is more or less unchanged.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

With the addition of the device replace procedure, it is possible
for btrfs_map_bio(READ) to report an error. This happens when the
specific mirror is requested which is located on the target disk,
and the copy operation has not yet copied this block. Hence the
block cannot be read and this error state is indicated by
returning EIO.
Some background information follows now. A new mirror is added
while the device replace procedure is running.
btrfs_get_num_copies() returns one more, and
btrfs_map_bio(GET_READ_MIRROR) adds one more mirror if a disk
location is involved that was already handled by the device
replace copy operation. The assigned mirror num is the highest
mirror number, e.g. the value 3 in case of RAID1.
If btrfs_map_bio() is invoked with mirror_num == 0 (i.e., select
any mirror), the copy on the target drive is never selected
because that disk shall be able to perform the write requests as
quickly as possible. The parallel execution of read requests would
only slow down the disk copy procedure. Second case is that
btrfs_map_bio() is called with mirror_num > 0. This is done from
the repair code only. In this case, the highest mirror num is
assigned to the target disk, since it is used last. And when this
mirror is not available because the copy procedure has not yet
handled this area, an error is returned. Everywhere in the code
the handling of such errors is added now.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This patch adds some code to disallow operations on the device that
is used as the target for the device replace operation.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Btrfs admin operations that are manually started from user mode
and that cannot be executed at the same time return -EINPROGRESS.
A common way to enter and leave this locked section is introduced
since it used to be specific to the balance operation.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Remove the attempt to cancel a running scrub or device replace
operation in btrfs_handle_error() because it adds the risk of
a deadlock. The only penalty of not canceling the operation is
that some I/O remains active until the procedure completes.
This is basically the same thing that happens to other tasks
that are running in user mode context, they are not affected
or stopped in btrfs_handle_error(), these tasks just need to
handle write errors correctly.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

A small number of functions that are used in a device replace
procedure when the operation is resumed at mount time are unable
to pass the same root pointer that would be used in the regular
(ioctl) context. And since the root pointer is not required, only
the fs_info is, the root pointer argument is replaced with the
fs_info pointer argument.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This new function is used by the device replace procedure in
a later patch.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This is required for the device replace procedure in a later step.
Two calling functions also had to be changed to have the fs_info
pointer: repair_io_failure() and scrub_setup_recheck_block().
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This is required for the device replace procedure in a later step.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

The new function btrfs_find_device_missing_or_by_path() will be
used for the device replace procedure. This function itself calls
the second new function btrfs_find_device_by_path().
Unfortunately, it is not possible to currently make the rest of the
code use these functions as well, since all functions that look
similar at first view are all a little bit different in what they
are doing. But in the future, new code could benefit from these
two new functions, and currently, device replace uses them.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Some code to open block devices, to read the superblock and to
handle errors was repeated multiple times in 3 places, and the
following patch makes use of it as well. This code is now moved
into a subfunction.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Just move some code into functions to make everything more readable.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

In the scrub repair code, the code is changed to handle memory
allocation errors a little bit smarter. The change is to handle
it just like a read error. This simplifies the code and removes
a couple of lines of code, since the code to handle read errors
is there anyway.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

In case that disk blocks need to be repaired (rewritten), the
current code at first (for simplicity reasons) reads all alternate
mirrors in the first step, afterwards selects the best one in a
second step. This is now changed to read one alternate mirror
after the other and to leave the loop early when a perfect mirror
is found.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

With the modified design (in order to support the devive replace
procedure) it is necessary to alloc the page array dynamically.
The reason is that pages are reused. At first a page is used for
the bio to read the data from the filesystem, then the same page
is reused for the bio that writes the data to the target disk.
Since the read process and the write process are completely
decoupled, this requires a new concept of refcounts and get/put
functions for pages, and it requires to use newly created pages
for each read bio which are freed after the write operation
is finished.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

The block device is removed from the scrub context state structure.
The scrub code as it is used for the device replace procedure reads
the source data from whereever it is optimal. The source device might
even be gone (disconnected, for instance due to a hardware failure).
Or the drive can be so faulty so that the device replace procedure
tries to avoid access to the faulty source drive as much as possible,
and only if all other mirrors are damaged, as a last resort, the
source disk is accessed.
The modified scrub code operates as if it would handle the source
drive and thereby generates an exact copy of the source disk on the
target disk, even if the source disk is not present at all. Therefore
the block device pointer to the source disk is removed in the scrub
context struct and moved into the lower level scope of scrub_bio,
fixup and page structures where the block device context is known.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

The device replace procedure makes use of the scrub code. The scrub
code is the most efficient code to read the allocated data of a disk,
i.e. it reads sequentially in order to avoid disk head movements, it
skips unallocated blocks, it uses read ahead mechanisms, and it
contains all the code to detect and repair defects.
This commit is a first preparation step to adapt the scrub code to
be shareable for the device replace procedure.
The block device will be removed from the scrub context state
structure in a later step. It used to be the source block device.
The scrub code as it is used for the device replace procedure reads
the source data from whereever it is optimal. The source device might
even be gone (disconnected, for instance due to a hardware failure).
Or the drive can be so faulty so that the device replace procedure
tries to avoid access to the faulty source drive as much as possible,
and only if all other mirrors are damaged, as a last resort, the
source disk is accessed.
The modified scrub code operates as if it would handle the source
drive and thereby generates an exact copy of the source disk on the
target disk, even if the source disk is not present at all. Therefore
the block device pointer to the source disk is removed in a later
patch, and therefore the context structure is renamed (this is the
goal of the current patch) to reflect that no source block device
scope is there anymore.

Summary:
This first preparation step consists of a textual substitution of the
term "dev" to the term "ctx" whereever the scrub context is used.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Since we've kill the bigger one volume_mutex, we need to add devices
list mutex back.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

- 'nr' is no more used.
- btrfs_btree_balance_dirty() and __btrfs_btree_balance_dirty() can share
  a bunch of code.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

When __merge_refs merges two refs, it is also needed to merge the
inode_list of both refs. Otherwise we have missed backrefs and memory
leaks. This happens for example if two inodes share an extent and
both lie in the same leaf and thus also have the same parent.
Signed-off-by: NAlexander Block <ablock84@googlemail.com>
Reviewed-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Even if the hole punching is executed, the modification time of the
file is not updated.
So, current time is set to inode.
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Someone who is root or capable(CAP_SYS_ADMIN) could corrupt the
superblock and make Btrfs printk("%s") crash while holding the
uuid_mutex since nobody forces a limit on the string. Since the
uuid_mutex is significant, the system would be unusable
afterwards.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

When creating a snapshot, failing to commit a transaction can end up
with aborting the transaction, following by doing a cleanup for it, where
we'll free all snapshots pending to disk.

So we check it and avoid double free on pending snapshots.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

When committing a transaction, we may bail out of running delayed refs
due to ENOSPC, and then abort the current transaction to flip into readonly.

But we'll hit a deadlock on ref head's lock since we forget to release
its lock and other cleanup stuff.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Just use WARN_ON rather than an if containing only WARN_ON(1).

A simplified version of the semantic patch that makes this transformation
is as follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e;
@@
- if (e) WARN_ON(1);
+ WARN_ON(e);
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Use WARN rather than printk followed by WARN_ON(1), for conciseness.

A simplified version of the semantic patch that makes this transformation
is as follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression list es;
@@

-printk(
+WARN(1,
  es);
-WARN_ON(1);
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>