- 25 4月, 2008 1 次提交
-
-
- Static memory is always initialized with 0. - Replaced in some cases C99 comments for /* */ Signed-off-by: NDouglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 20 3月, 2008 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 26 1月, 2008 4 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Ricardo Cerqueira 提交于
All cx2388 boards need the line-in audio to be routed from an external ADC (refered to as "ADC mode" in the spec sheet), since the chip is uncapable of dealing with baseband audio directly. So... this patch enables normal mode when using the tuner (TV or Radio), and enables ADC mode with any other source. It'll probably only work with boards that have supported ADCs (such as the Wolfson wm9775) Signed-off-by: NRicardo Cerqueira <v4l@cerqueira.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Ricardo Cerqueira 提交于
Fix lack of audio on the MPEG-2 stream of wm8775 based blackbirds. The wm8775 module initializes the audio input at "route 2", which doesn't hold true for all boards. The HVR-1300, for example, uses route 1 for tuner audio, and route 2 for baseband. So we must route the audio to the proper input depending on what video input is being used. Signed-off-by: NRicardo Cerqueira <v4l@cerqueira.org> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Brandon Philips 提交于
s/STATE_NEEDS_INIT/VIDEOBUF_NEEDS_INIT/g s/STATE_PREPARED/VIDEOBUF_PREPARED/g s/STATE_QUEUED/VIDEOBUF_QUEUED/g s/STATE_ACTIVE/VIDEOBUF_ACTIVE/g s/STATE_DONE/VIDEOBUF_DONE/g s/STATE_ERROR/VIDEOBUF_ERROR/g s/STATE_IDLE/VIDEOBUF_IDLE/g Signed-off-by: NBrandon Philips <bphilips@suse.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 12 12月, 2007 1 次提交
-
-
由 Brandon Philips 提交于
Drivers were using cookie cutter code for stopping the read/stream. Use the new videobuf_stop function which is lock safe. Signed-off-by: NBrandon Philips <bphilips@suse.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 22 10月, 2007 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
struct video_device used to define a .hardware field. While initialized on severl drivers, this field is never used inside V4L. However, drivers using it need to include the old V4L1 header. This seems to cause compilation troubles with some random configs. Better just to remove it from all drivers. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 11 10月, 2007 1 次提交
-
-
由 Trent Piepho 提交于
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 10 10月, 2007 9 次提交
-
-
由 Mauro Carvalho Chehab 提交于
PCI-dependent videobuf_foo methods were renamed as videobuf_pci_foo. Also, videobuf_dmabuf is now part of videobuf-dma-sg private struct. So, to access it, a subroutine call is needed. This patch renames all occurences of those function calls to be consistent with the video-buf split. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981Reviewed-by: NRicardo Cerqueira <v4l@cerqueira.org>
-
由 Mauro Carvalho Chehab 提交于
IR workqueue should be disabled during suspend. This avoids some troubles, like the one reported on bug #8689: "The Hauppauge HVR 1100 ir-remote control does not work after resume from suspend to ram or disk." This patch disables IR before suspending, re-enabling it after resume. Thanks to Peter Poklop <Peter.Poklop@gmx.at> for reporting it and helping with the fix. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org> Reviewed-by: NPeter Poklop <Peter.Poklop@gmx.at>
-
由 Michael Krufky 提交于
Auto-load ir-kbd-i2c for ir receiver support, and rtc-isl1208 for rtc support for the FusionHDTV5 RT Gold. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Since at least kernel 2.6.12-rc2, module.h includes moduleparm.h. This patch removes all occurences of moduleparm.h from drivers/media files. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
Used for the PCI_INTMSK and PCI_INT_STAT registers. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
Get rid of the "CORE" prefix from cx88 printks. It was only used a few times, and it makes it look like they're coming from the kernel core or something. Fix the message, "TV tuner 60 at 0x1fe, Radio tuner -1 at 0x1fe", by adding a "cx88[0]" prefix to be consistent, and to keep people who grep their dmesg output for cx88 from missing it. Get rid of the addresses, which are always wrong. The addresses are always set to -1, but because it's an unsigned 8-bit value, the left shift converts it to the nonsense address 0x1fe. In the cx8802 driver, some cut and pasted code prefixed lines with "CORE cx88[0]:", which has been changed to "cx88[0]/2:" like the other printks from the cx8802 driver. Also fix some ugly printks in the cx8802 driver that used __FUNCTION__ for KERN_INFO and KERN_ERR messages. The changed printks in cx88-mpeg.c also needed lots of whitespace and 80-column fixes. A bunch of misc changes in cx88-dvb.c and cx88-video.c to add message levels or a consistent "cx88[?]/2" or "cx88[?]/0" prefix. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
The cx88 driver state stored the ID of the board type in core->board. Every time the driver need to get some information about the board configuration, it uses the board number as an index into board configuration array. This patch changes it so that the board number is in core->boardnr, and core->board is a copy of the board configuration information. This allows access to board information without the extra indirection. e.g. cx88_boards[core->board].mpeg becomes core->board.mpeg. This has a number of advantages: - The code is simpler to write. - It compiles to be smaller and faster, without needing the extra array lookup to get at the board information. - The cx88_boards array no longer needs to be exported to all cx88 modules. - The boards array can be made const - It should be possible to avoid keeping the (large) cx88_boards array around after the module is loaded. - If module parameters or eeprom info override some board configuration setting, it's not necessary to modify the boards array, which would affect all boards of the same type. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
Add the advanced debug functions to the radio videodev template. One could already use them from the video and vbi devices. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Jesper Juhl 提交于
This patch cleans up duplicate includes in drivers/media/ Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 21 7月, 2007 1 次提交
-
-
由 Cyrill Gorcunov 提交于
The patch adds checking of kthread_run return code and issues a message if it fails. Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 09 5月, 2007 1 次提交
-
-
由 Alexey Dobriyan 提交于
error: 'DMA_32BIT_MASK' undeclared Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 08 5月, 2007 1 次提交
-
-
由 Andrew Morton 提交于
alpha: drivers/media/video/cx88/cx88-video.c: In function 'cx8800_initdev': drivers/media/video/cx88/cx88-video.c:1782: error: 'DMA_32BIT_MASK' undeclared (first use in this function) drivers/media/video/cx88/cx88-video.c:1782: error: (Each undeclared identifier is reported only once drivers/media/video/cx88/cx88-video.c:1782: error: for each function it appears in.) Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 4月, 2007 2 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
cx88_print_irqbits were expecting a string pointer with 32 bytes. Better to pass the string size and use ARRAY_SIZE on its calls. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 01 3月, 2007 1 次提交
-
-
由 Hans Verkuil 提交于
The chip matching in struct v4l2_register for VIDIOC_DBG_G/S_REGISTER was rather primitive. It could not be extended to other busses besides i2c and it lacked a way to. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 21 2月, 2007 10 次提交
-
-
由 Adrian Bunk 提交于
This patch removes the unused struct radionorms. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
The direct register access ioctls were defined as kernel internal only, but they are very useful for debugging hardware from userspace and are used as such. Officially export them. VIDIOC_INT_[SG]_REGISTER is renamed to VIDIOC_DBG_[SG]_REGISTER Definition of ioctl and struct v4l2_register is moved from v4l2-common.h to videodev2.h. Types used in struct v4l2_register are changed to the userspace exportable versions (u32 -> __u32, etc). Use of VIDIOC_DBG_S_REGISTER requires CAP_SYS_ADMIN permission, so move the check into the video_ioctl2() dispatcher so it doesn't need to be duplicated in each driver's call-back function. CAP_SYS_ADMIN check is added to pvrusb2 (which doesn't use video_ioctl2). Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
Add support for these ioctls to the video_ioctl2 system and the cx88 driver. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
The video_ioctl2 conversion replaced the default from NTSC to PAL_BG. This broke cx88-blackbird. Probably, there are some badness at this driver, not doing all required stuff to change video standard. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
v4l2_tvnorm were meant to describe video standards and its names to V4L2 API. However, this were doing by some static structures at the driver. This patch changes the internals in a way that, at the driver, only a v4l2_tvnorm (a 64 bit integer) should be filled, with all supported tvnorms. videodev will dynamically generate the proper API array based on supported standards. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
video_mux is renamed to cx88_video_mux to be exported to cx88-blackbird Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
video_ioctl2 handler provides V4L2 API parsing. Using it makes the driver simpler, and isolates API parsing. This allows future reusage of driver controls using other ways, like sysfs and/or procfs and increases isolation of driver-specific handling from the generic common ioctl processing. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 13 2月, 2007 1 次提交
-
-
由 Arjan van de Ven 提交于
Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. [akpm@sdl.org: dvb fix] Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 12月, 2006 2 次提交
-
-
由 Michael Krufky 提交于
Some cx88-blackbird boards use an external adc, but not necessarily for all inputs. Thus, this needs to be configurable on the card level for each input. This patch allows for the usage of the external adc to be determined by a bit setting in the cx88_input struct for cards based on the cx88 blackbird design. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
Add support for the advanced debugging ioctls, to allow access to the cx88 registers from userspace. Only i2c_id == 0 is supported, for access to the cx88 adapter itself. There isn't any support for access to I2C clients of the adapter. Most of them don't have R/W registers anyway, and its necessary to use i2c-dev to talk to them from userspace. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 05 10月, 2006 1 次提交
-
-
由 David Howells 提交于
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: NDavid Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
-
- 04 10月, 2006 1 次提交
-
-
由 Steven Toth 提交于
A generic change to cards to allow any board to specify whether it needs the wm8775 module loaded (by the core) or not. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 26 9月, 2006 1 次提交
-
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-