- 30 1月, 2013 35 次提交
-
-
由 Karen Higgins 提交于
Removed unnecessary calls to qla4xxx_get_firmware_status from function qla4xxx_init_local_data Signed-off-by: NKaren Higgins <karen.higgins@qlogic.com> Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Nilesh Javali 提交于
Quiesce all different activities performed by driver upon the link events while loopback diagnostics is in progress. Signed-off-by: NNilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Nilesh Javali 提交于
Signed-off-by: NNilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Nilesh Javali 提交于
The spurious interrupt messages are seen when interrupt lines are shared between different adapters or modules. Example, interrupt lines are shared between qlcnic and qla4xxx and USB modules, then the console is flooded with flurry of spurious interrupt messages which are expected in such scenario. Hence put these messages under debug level 2 for INTx interrupt mode. Signed-off-by: NNilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
When doing a hotplug remove of a cxgb4 device, there are still dandling symlinks at /sys/class/scsi_host/hostX to the removed PCI device. The upper layer device may also try to send data, which may crash the system. The DETACH message from the lower level driver is sent to the ULD when the device is removed, when the scsi host should be removed from the system, avoiding any problems. After this patch, there are no more dangling symlinks and many attempts to crash the system while there is SCSI activity and removing the device have failed. Adding the device back again works as expected, with the scsi hosts showing up again. Based on a patch by Karen Xie. Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Cc: Karen Xie <kxie@chelsio.com> Reviewed-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Dan Carpenter 提交于
The closing parenthesis is in the wrong place so it takes the sizeof a pointer instead of the sizeof the buffer minus one. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NAnil Gurumurthy <agurumur@brocade.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Vikas Chaudhary 提交于
Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Nilesh Javali 提交于
Check mbox_sts[3] instead of mbox_sts[4] for ISP83xx to validate size of data returned Signed-off-by: NNilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Vikas Chaudhary 提交于
Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 James Smart 提交于
Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 James Smart 提交于
Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 James Smart 提交于
Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 James Smart 提交于
Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 James Smart 提交于
Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 James Smart 提交于
Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 James Smart 提交于
Fixed no-context ABTS received on unsolicited receive queue failed with BA_RJT Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 James Smart 提交于
Removed use of NOP mailboxes for interrupt verification in pci_probe_one_s4 Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 James Smart 提交于
Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 James Smart 提交于
Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 James Smart 提交于
Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
This patch fixes the following sparse error: CHECK drivers/scsi/ipr.c spinlock.h:147:9: warning: context imbalance in 'ipr_reset_reload' - unexpected unlock Signed-off-by: NWen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
Signed-off-by: NWen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
This patch implements blk iopoll in ipr driver for performance improvement. Signed-off-by: NWen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
This patch reduces lock contention while implementing distributed completion processing. Signed-off-by: NWen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
The new generation IBM SAS Controllers will support MSI-X interrupts and Distributed Completion Processing features. This patch add these support in ipr device driver. Signed-off-by: NWen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Brian King 提交于
The resource path as displayed by the ipr driver is the location string identifying a location on the SAS fabric. This patch adds the SCSI host number such that error logs can be more easily correlated in multiple adapter configurations. Signed-off-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NWen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Brian King 提交于
Reported-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NWen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
Add the appropriate definitions and table entries for new adapter support. Signed-off-by: NWen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Jesper Juhl 提交于
If kzalloc() or csio_hw_check_fwconfig() fail we may leave the csio_hw_flash_config() function without freeing allocated memory or firmware. This should take care of the leaks. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Acked-by: NNaresh Kumar Inna <naresh@chelsio.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Bhanu Prakash Gollapudi 提交于
Signed-off-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Bhanu Prakash Gollapudi 提交于
Increase max_sectors from 512 to 1024 in order to support max IO size of 512KB. Signed-off-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Bhanu Prakash Gollapudi 提交于
Since the FW counters are 32-bit, accumulate the stats in the driver. [jejb: fix checkpatch warning] Signed-off-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Bhanu Prakash Gollapudi 提交于
We used to map doorbell register after FW enable request is complete. This causes a race condition when unsolicited event is received, and FW sends a CQE for it. Since the doorbell is not mapped, driver does not arm CQ, which means FW will not notify the driver for further CQ completions. To resolve this, map the doorbell between offload and enable, so that driver is ready to receive the unsolicited packets and arm the CQ as soon as FW enable is performed. Signed-off-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Bhanu Prakash Gollapudi 提交于
Moved the 'waiting for upload/offload completion' logic to respective functions as it is called in multiple places. Also this is done in preperation for the next patch. Signed-off-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Bhanu Prakash Gollapudi 提交于
Software FCoE target always advertises RETRY bit even when there are no tape LUNs behind the target. This causes the driver to enable FW support for sequence level error recovery and perform REC/SRR. This patch arrests the behavior by not enabling SLER feature for this target. Signed-off-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
- 29 1月, 2013 5 次提交
-
-
由 Julia Lawall 提交于
If the NULL test is necessary, the initialization involving a dereference of the tested value should be moved after the NULL test. The sematic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Cyril Roelandt 提交于
These calls are followed by calls to memcpy() on the same memory area, so they can be safely removed. Signed-off-by: NCyril Roelandt <tipecaml@gmail.com> Signed-off-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Sreekanth Reddy 提交于
This patch stops the driver to invoke kthread (which remove the dead ioc) for some time while EEH recovery has started. [thenzl: add a 'non_operational_loop' reset.] Signed-off-by: NSreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: NTomas Henzl <thenzl@redhat.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Wei Yongjun 提交于
The variable 'chain_flags' and 'phy_number' are initialized but never used otherwise, So remove those unused variables. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NSreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Sachin Kamat 提交于
linux/version.h is not necessary as detected by checkversion.pl script. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Acked-by: N"Sreekanth Reddy" <Sreekanth.reddy@lsi.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-