This patch fixes a new off-by-one bug in the hardcoded starting offset of
spc_emulate_modesense() code that causes BLOCK DESCRIPTOR to be incorrectly
written within the MEDIUM TYPE buffer area of the mode parameter header.

According to spc4r30, Section 7.5.4, BLOCK DESCRIPTOR for MODE_SENSE_10
starts at byte 3, and BLOCK_DESCRIPTOR for MODE_SENSE (6) starts at byte 2.

(roland: add MODE DATA LENGTH + MEDIUM TYPE offset comment)

Cc: Roland Dreier <roland@purestorage.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This is another thing that compliance tests try, and it's easy to
implement on top of the MODE SENSE refactoring; since we don't claim
to support any changeable values, all we need to do is check that
the page contents sent by the initiator match what we would return.
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

The Windows SCSI compliance test asks for this mode page, and it's
easy to implement: we can just return all 0s to show we don't support
any of these features.
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Convert spc_emulate_modesense() to use a table of mode pages, rather
than a switch statement.  This makes it possible to add more pages
sanely -- in particular we no longer need to make sure we keep the
0x3f (return all mode pages) case in sync.

While we're touching this code, make our MODE SENSE emulation a bit
better in a couple of ways:
 - When the initiator passes PC == 1 asking for changeable values,
   return all 0s to show we don't support setting anything.
 - Return a block descriptor for disk devices.

(nab: fix up device attribute references to use dev->dev_attrib
      in for-next code)
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Instead of using the obfuscated pattern of

	list_for_each_entry(var, list, ...)
		break;

to set var to the first entry of a list, use the straightforward

	var = list_first_entry(list, ...);
Reported-by: NJoern Engel <joern@logfs.org>
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Now that the reservations and ALUA code have been cleaned up there is no need
for the get_device_rev method, as we only need the standards revision in the
inquiry data, where we can hardcode it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

We always support ALUA for virtual backends, and never for physical ones.  Simplify
the code to just deal with these two cases and remove the superflous abstractions.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

We do not support host-level reservations for the pscsi backend, and all
virtual backends are newere than SCSI-2, so just make the combined
SPC-3 + SCSI-2 support the only supported variant and kill the switches
for the different implementations, given that this code handles the no-op
version just fine.

(hch: Update DRF_SPC2_RESERVATIONS lock usage)
Signed-off-by: NChristoph Hellwig <hch@lst.de>

We can just key off ordered tag emulation of the transport_type field.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

We need to assign spc_emulate_report_luns to the execute_cmd callback
and not execute it directly.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

drivers/target/target_core_pscsi.c:464:5: sparse: symbol 'pscsi_configure_device'
was not declared. Should it be static?

FYI, there are new sparse warnings show up in

tree:   git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending.git queue
head:   738b86ac5e56c645aa5b7bf49cb38e2a04c665f8
commit: 410aeee637c47bcf7e8dd7893347fe0811e07ab1 [47/51] target: kill struct se_subsystem_dev

vim +464 drivers/target/target_core_pscsi.c

410aeee6 Christoph Hellwig  2012-10-08 @464  int pscsi_configure_device(struct se_device *dev)
c66ac9db Nicholas Bellinger 2010-12-17  465  {
410aeee6 Christoph Hellwig  2012-10-08  466  	struct se_hba *hba = dev->se_hba;
410aeee6 Christoph Hellwig  2012-10-08  467  	struct pscsi_dev_virt *pdv = PSCSI_DEV(dev);
c66ac9db Nicholas Bellinger 2010-12-17  468  	struct scsi_device *sd;
410aeee6 Christoph Hellwig  2012-10-08  469  	struct pscsi_hba_virt *phv = dev->se_hba->hba_ptr;
c66ac9db Nicholas Bellinger 2010-12-17  470  	struct Scsi_Host *sh = phv->phv_lld_host;
c66ac9db Nicholas Bellinger 2010-12-17  471  	int legacy_mode_enable = 0;
410aeee6 Christoph Hellwig  2012-10-08  472  	int ret;

Please consider folding the attached diff :-)
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

No need to indirect through spc_parse_cdb if we only ever call it for
REPORT LUNS emulation.

(nab: Add missing EXPORT_SYMBOL for spc_emulate_report_luns)
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

These really are sbc_ops, so name them correctly.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Simplify the code a lot by killing the superflous struct se_subsystem_dev.
Instead se_device is allocated early on by the backend driver, which allocates
it as part of its own per-device structure, borrowing the scheme that is for
example used for inode allocation.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch changes core_tmr_abort_task() to use spin_lock -> spin_unlock
around se_cmd->t_state_lock while spin_lock_irqsave is held via
se_sess->sess_cmd_lock.
Signed-off-by: NSteve Hodgson <steve@purestorage.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Cc: stable@vger.kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

The sleeping code in iscsi_target_tx_thread() is susceptible to the classic
missed wakeup race:

 - TX thread finishes handle_immediate_queue() and handle_response_queue(),
   thinks both queues are empty.
 - Another thread adds a queue entry and does wake_up_process(), which does
   nothing because the TX thread is still awake.
 - TX thread does schedule_timeout() and sleeps forever.

In practice this can kill an iSCSI connection if for example an initiator
does single-threaded writes and the target misses the wakeup window when
queueing an R2T; in this case the connection will be stuck until the
initiator loses patience and does some task management operation (or kills
the connection entirely).

Fix this by converting to wait_event_interruptible(), which does not
suffer from this sort of race.
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Cc: Andy Grover <agrover@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

The expression (max_sectors * block_size) might overflow a u32
(indeed, since iblock sets max_hw_sectors to UINT_MAX, it is
guaranteed to overflow and end up with a much-too-small result in many
common cases).  Fix this by doing an equivalent calculation that
doesn't require multiplication.

While we're touching this code, avoid splitting a printk format across
two lines and use pr_info(...) instead of printk(KERN_INFO ...).
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Cc: stable@vger.kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

If the call to core_dev_release_virtual_lun0() fails, then nothing
sets ret to anything other than 0, so even though everything is
torn down and freed, target_core_init_configfs() will seem to succeed
and the module will be loaded.  Fix this by passing the return value
on up the chain.
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Cc: stable@vger.kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch fixes a regression in spc_emulate_inquiry() code where the
local scope bounce buffer was no longer getting it's memory zeroed,
causing various problems with SCSI initiators that depend upon areas
of INQUIRY EVPD=0x83 payload having been zeroed.

This bug was introduced with the following v3.7-rc1 patch + CC'ed
stable commit:

commit ffe7b0e9
Author: Paolo Bonzini <pbonzini@redhat.com>
Date:   Fri Sep 7 17:30:38 2012 +0200

    target: support zero allocation length in INQUIRY

Go ahead and re-add the missing memset of bounce buffer memory to be
copied into the outgoing se_cmd descriptor kmapped SGL payload.
Reported-by: NKelsey Prantis <kelsey.prantis@intel.com>
Cc: Kelsey Prantis <kelsey.prantis@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Andy Grover <agrover@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

With kernel 3.6 some obsolete SCSI-2 commands including SEEK_10 have
have been removed by commit 1fd032ee
"target: move code for CDB emulation".

There are still clients out there which use these old SCSI-2 commands.
This mainly happens when running VMs with legacy guest systems,
connected via SCSI command pass-through to iSCSI targets. Make them
happy and return status GOOD.

Many real SCSI disks or external iSCSI storage devices still support
these old commands. So let's make LIO backward compatible as well.

This patch adds support for the previously removed SEEK_10 and
additionally the SEEK_6 and REZERO_UNIT commands.
Signed-off-by: NBernhard Kohl <bernhard.kohl@nsn.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Fabric drivers currently expect to internally release se_cmd in the event
of a TMR failure during target_submit_tmr(), which means the immediate call
to transport_generic_free_cmd() after TFO->queue_tm_rsp() from within
target_complete_tmr_failure() workqueue context is wrong.

This is done as some fabrics expect TMR operations to be acknowledged
before releasing the descriptor, so the assumption that core is releasing
se_cmd associated TMR memory is incorrect.  This fixes a OOPs where
transport_generic_free_cmd() was being called more than once.

This bug was originally observed with tcm_qla2xxx fabric ports.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Andy Grover <agrover@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch increases the default for nopin_timeout to 15 seconds (wait
between sending a new NopIN ping) and nopin_response_timeout to 30 seconds
(wait for NopOUT response before failing the connection) in order to avoid
false positives by iSCSI Initiators who are not always able (under load) to
respond to NopIN echo PING requests within the current 5 second window.

False positives have been observed recently using Open-iSCSI code on v3.3.x
with heavy large-block READ workloads over small MTU 1 Gb/sec ports, and
increasing these values to more reasonable defaults significantly reduces
the possibility of false positive NopIN response timeout events under
this specific workload.

Historically these have been set low to initiate connection recovery as
soon as possible if we don't hear a ping back, but for modern v3.x code
on 1 -> 10 Gb/sec ports these new defaults make alot more sense.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Hannes Reinecke <hare@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Make sure all on the wire types are use as big endian and big endian only so
that sparse can verify all the conversions are done right.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Use the special itt_t type defined by the iscsi headers and the initiator
to make sure it's an opaque value.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Sparse noticed that INADDR_ANY needs to be converted to big endian before
it can be stored in struct sockaddr_in.s_addr.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Fix a potential multiple spin-unlock -> deadlock scenario during the
overflow check within iscsit_build_sendtargets_resp() as found by
sparse static checking.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch marks a number of functions static to appease sparse static
checking.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Clang warns about this bug:
drivers/target/iscsi/iscsi_target_erl0.c:52:45: warning: operator '?:'
	has lower precedence than '+'; '+' will be evaluated first
	[-Wparentheses]
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch carries forward a work-around from tcm_loop to target
core code to explicitly clear control CDB READ paylods in order to
avoid bugs in scsi-generic user-space code for INQUIRY that do not
explicitly zero CDB payload memory.

(v2: Drop TARGET_SCF_MAP_CLEAR_MEM, and perform the explicit zero
     of READ memory for all target_submit_cmd_map_sgls users)

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch converts tcm_loop to use target_submit_cmd_map_sgls() for
I/O submission and mapping of pre-allocated SGL memory from incoming
scsi_cmnd -> se_cmd descriptors.

This includes removing the original open-coded fabric uses of target
core callers to support transport_generic_map_mem_to_cmd() between
target_setup_cmd_from_cdb() and transport_handle_cdb_direct() logic.

(v2: Use renamed target_submit_cmd_map_sgls)
Reported-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch adds a new target_submit_cmd_map_sgls() to pass pre-allocated
SGL memory using transport_generic_map_mem_to_cmd() logic into the generic
target submit I/O codepath.

It also adds a target_submit_cmd() wrapper around target_submit_cmd_map_sgls()
for existing fabric code that already assumes internal target-core SGL memory
allocation.

(v2: Rename to target_submit_cmd_map_sgls + drop TARGET_SCF_MAP_MEM flag
     in favor of non zero sgl_count check)
Reported-by: NChristoph Hellwig <hch@lst.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

We've had reports in the past about this specific case, so it's time to
go ahead and explicitly set cache_dynamic_acls=1 for generate_node_acls=1
(TPG demo-mode) operation.

During normal generate_node_acls=0 operation with explicit NodeACLs ->
se_node_acl memory is persistent to the configfs group located at
/sys/kernel/config/target/$TARGETNAME/$TPGT/acls/$INITIATORNAME, so in
the generate_node_acls=1 case we want the reservation logic to reference
existing per initiator IQN se_node_acl memory (not to generate a new
se_node_acl), so go ahead and always set cache_dynamic_acls=1 when
TPG demo-mode is enabled.
Reported-by: NRonnie Sahlberg <ronniesahlberg@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch converts iscsi_target_seq_pdu_list.c code for DataSequenceInOrder=No +
DataPDUInOrder=No operation to honor the MaxXmitDataSegmentLength value
for iscsi_cmd->se_cmd.data_direction == DMA_TO_DEVICE cases.

Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Andy Grover <agrover@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

The iSCSI TMR TASK_REASSIGN completion logic in iscsi_tmr_task_reassign()
does an explict check for MRDSL across task reassignment, so go ahead and
add an explict MaxXmitDataSegmentLength check here as well to be safe.

Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Andy Grover <agrover@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Now that iscsi-target supports a local configurable MaxXmitDataSegmentLength,
go ahead and make ISCSI_OP_SCSI_CMD, ISCSI_OP_SCSI_DATA_OUT, ISCSI_OP_NOOP_OUT
and ISCSI_OP_TEXT PDU payload checks honor conn_ops->MaxXmitDataSegmentLength.

Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Andy Grover <agrover@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch activates MaxXmitDataSegmentLength usage that performs the
following sequence of events:

- Once the incoming initiator's MAXRECVDATASEGMENTLENGTH key is detected
  within iscsi_check_acceptor_state(), save the requested MRDSL into
  conn->conn_ops->MaxRecvDataSegmentLength

- Next change the outgoing target's MaxRecvDataSegmenthLength key=value
  based upon the local TPG's MaxXmitDataSegmentLength attribute value.

- Change iscsi_set_connection_parameters() to skip the assignment of
  conn->conn_ops->MaxRecvDataSegmentLength, now setup within
  iscsi_check_acceptor_state()

Also update iscsi_decode_text_input() -> iscsi_check_acceptor_state()
code-path to accept struct iscsi_conn *.

Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Andy Grover <agrover@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch introduces a new per connection MaxXmitDataSegmentLength
parameter value used to represent the outgoing MaxRecvDataSegmentLength
that is actually sent over the wire during iSCSI login response back
to the initiator side.

It also adds a new MaxXmitDataSegmentLength configfs attribute to
represent this value within the existing TPG parameter group under
/sys/kernel/config/target/iscsi/$TARGETNAME/$TPGT/param/

Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Andy Grover <agrover@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch re-adds the ability to optionally run in buffered FILEIO mode
(eg: w/o O_DSYNC) for device backends in order to once again use the
Linux buffered cache as a write-back storage mechanism.

This logic was originally dropped with mainline v3.5-rc commit:

commit a4dff304
Author: Nicholas Bellinger <nab@linux-iscsi.org>
Date:   Wed May 30 16:25:41 2012 -0700

    target/file: Use O_DSYNC by default for FILEIO backends

This difference with this patch is that fd_create_virtdevice() now
forces the explicit setting of emulate_write_cache=1 when buffered FILEIO
operation has been enabled.

(v2: Switch to FDBD_HAS_BUFFERED_IO_WCE + add more detailed
     comment as requested by hch)
Reported-by: NFerry <iscsitmp@bananateam.nl>
Cc: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>