Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 161
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 04 4月, 2017 1 次提交
    • T
      PCI: thunder-pem: Fix legacy firmware PEM-specific resources · feb199eb
      由 Tomasz Nowicki 提交于 
      SZ_16M PEM resource size includes PEM-specific register and its children
resources. Reservation of the whole SZ_16M range leads to child device
driver failure when pcieport driver is requesting resources:

  pcieport 0004:1f:00.0: can't enable device: BAR 0 [mem 0x87e0c0f00000-0x87e0c0ffffff 64bit] not claimed

So we cannot reserve full 16M here and instead we want to reserve
PEM-specific register only which is SZ_64K.

At the end increase PEM resource to SZ_16M since this is what
thunder_pem_init() call expects for proper initialization.

Fixes: 9abb27c7 ("PCI: thunder-pem: Add legacy firmware support for Cavium ThunderX host controller")
Signed-off-by: NTomasz Nowicki <tn@semihalf.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v4.10+
      feb199eb
  3. 24 3月, 2017 2 次提交
  5. 10 3月, 2017 1 次提交
    • B
      PCI: iproc: Save host bridge window resource in struct iproc_pcie · 6e347b5e
      由 Bjorn Helgaas 提交于 
      The host bridge memory window resource is inserted into the iomem_resource
tree and cannot be deallocated until the host bridge itself is removed.

Previously, the window was on the stack, which meant the iomem_resource
entry pointed into the stack and was corrupted as soon as the probe
function returned, which caused memory corruption and errors like this:

  pcie_iproc_bcma bcma0:8: resource collision: [mem 0x40000000-0x47ffffff] conflicts with PCIe MEM space [mem 0x40000000-0x47ffffff]

Move the memory window resource from the stack into struct iproc_pcie so
its lifetime matches that of the host bridge.

Fixes: c3245a56 ("PCI: iproc: Request host bridge window resources")
Reported-and-tested-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v4.8+
      6e347b5e
  7. 08 3月, 2017 3 次提交
    • Y
      PCI/ASPM: Always set link->downstream to avoid NULL dereference on remove · 3bd7db63
      由 Yinghai Lu 提交于 
      We call pcie_aspm_exit_link_state() when we remove a device.  If the device
is the last PCIe function to be removed below a bridge and the bridge has
an ASPM link_state struct, we disable ASPM on the link.  Disabling ASPM
requires link->downstream (used in pcie_config_aspm_link()).

We previously set link->downstream in pcie_aspm_cap_init(), but only if the
device was not blacklisted.  Removing the blacklisted device caused a NULL
pointer dereference in the pcie_aspm_exit_link_state() ->
pcie_config_aspm_link() path:

  # echo 1 > /sys/bus/pci/devices/0000\:0b\:00.0/remove
  ...
   BUG: unable to handle kernel NULL pointer dereference at 0000000000000080
   IP: pcie_config_aspm_link+0x5d/0x2b0
   Call Trace:
    pcie_aspm_exit_link_state+0x75/0x130
    pci_stop_bus_device+0xa4/0xb0
    pci_stop_and_remove_bus_device_locked+0x1a/0x30
    remove_store+0x50/0x70
    dev_attr_store+0x18/0x30
    sysfs_kf_write+0x44/0x60
    kernfs_fop_write+0x10e/0x190
    __vfs_write+0x28/0x110
    ? rcu_read_lock_sched_held+0x5d/0x80
    ? rcu_sync_lockdep_assert+0x2c/0x60
    ? __sb_start_write+0x173/0x1a0
    ? vfs_write+0xb3/0x180
    vfs_write+0xc4/0x180
    SyS_write+0x49/0xa0
    do_syscall_64+0xa6/0x1c0
    entry_SYSCALL64_slow_path+0x25/0x25
   ---[ end trace bd187ee0267df5d9 ]---

To avoid this, set link->downstream in alloc_pcie_link_state(), so every
pcie_link_state structure has a valid link->downstream pointer.

[bhelgaas: changelog]
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRajat Jain <rajatja@google.com>
CC: stable@vger.kernel.org
      3bd7db63
    • E
      PCI: Prevent VPD access for QLogic ISP2722 · 0d5370d1
      由 Ethan Zhao 提交于 
      QLogic ISP2722-based 16/32Gb Fibre Channel to PCIe Adapter has the VPD
access issue too, while read the common pci-sysfs access interface shown as

 /sys/devices/pci0000:00/0000:00:03.2/0000:0b:00.0/vpd

with simple 'cat' could cause system hang and panic:

  Kernel panic - not syncing: An NMI occurred. Depending on your system the reason for the NMI is logged in any one of the following resources:
  1. Integrated Management Log (IML)
  2. OA Syslog
  3. OA Forward Progress Log
  4. iLO Event Log
  CPU: 0 PID: 15070 Comm: udevadm Not tainted 4.1.12
  Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 12/27/2015
   0000000000000086 000000007f0cdf51 ffff880c4fa05d58 ffffffff817193de
   ffffffffa00b42d8 0000000000000075 ffff880c4fa05dd8 ffffffff81714072
   0000000000000008 ffff880c4fa05de8 ffff880c4fa05d88 000000007f0cdf51
  Call Trace:
   <NMI>  [<ffffffff817193de>] dump_stack+0x63/0x81
   [<ffffffff81714072>] panic+0xd0/0x20e
   [<ffffffffa00b390d>] hpwdt_pretimeout+0xdd/0xe0 [hpwdt]
   [<ffffffff81021fc9>] ? sched_clock+0x9/0x10
   [<ffffffff8101c101>] nmi_handle+0x91/0x170
   [<ffffffff8101c10c>] ? nmi_handle+0x9c/0x170
   [<ffffffff8101c5fe>] io_check_error+0x1e/0xa0
   [<ffffffff8101c719>] default_do_nmi+0x99/0x140
   [<ffffffff8101c8b4>] do_nmi+0xf4/0x170
   [<ffffffff817232c5>] end_repeat_nmi+0x1a/0x1e
   [<ffffffff815d724b>] ? pci_conf1_read+0xeb/0x120
   [<ffffffff815d724b>] ? pci_conf1_read+0xeb/0x120
   [<ffffffff815d724b>] ? pci_conf1_read+0xeb/0x120
   <<EOE>>  [<ffffffff815db4b3>] raw_pci_read+0x23/0x40
   [<ffffffff815db4fc>] pci_read+0x2c/0x30
   [<ffffffff8136f612>] pci_user_read_config_word+0x72/0x110
   [<ffffffff8136f746>] pci_vpd_pci22_wait+0x96/0x130
   [<ffffffff8136ff9b>] pci_vpd_pci22_read+0xdb/0x1a0
   [<ffffffff8136ea30>] pci_read_vpd+0x20/0x30
   [<ffffffff8137d590>] read_vpd_attr+0x30/0x40
   [<ffffffff8128e037>] sysfs_kf_bin_read+0x47/0x70
   [<ffffffff8128d24e>] kernfs_fop_read+0xae/0x180
   [<ffffffff8120dd97>] __vfs_read+0x37/0x100
   [<ffffffff812ba7e4>] ? security_file_permission+0x84/0xa0
   [<ffffffff8120e366>] ? rw_verify_area+0x56/0xe0
   [<ffffffff8120e476>] vfs_read+0x86/0x140
   [<ffffffff8120f3f5>] SyS_read+0x55/0xd0
   [<ffffffff81720f2e>] system_call_fastpath+0x12/0x71
  Shutting down cpus with NMI
  Kernel Offset: disabled
  drm_kms_helper: panic occurred, switching back to text console

So blacklist the access to its VPD.
Signed-off-by: NEthan Zhao <ethan.zhao@oracle.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v4.6+
      0d5370d1
    • J
      PCI: exynos: Initialize elbi_base even when using PHY framework · 544714d8
      由 Jaehoon Chung 提交于 
      Even when using the PHY framework, we need the elbi_base.  Before this
patch, we didn't initialize elbi_base, which caused NULL pointer
dereferences later.

Fixes: e7cd7ef5 ("PCI: exynos: Support the PHY generic framework")
Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
      544714d8
  9. 04 3月, 2017 8 次提交
  11. 03 3月, 2017 18 次提交
    • M
      can: flexcan: fix typo in comment · 66ddb821
      由 Marc Kleine-Budde 提交于 
      This patch fixes the typo "Disble" -> "Disable".
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
      66ddb821
    • M
      can: usb_8dev: Fix memory leak of priv->cmd_msg_buffer · 7c426313
      由 Marc Kleine-Budde 提交于 
      The priv->cmd_msg_buffer is allocated in the probe function, but never
kfree()ed. This patch converts the kzalloc() to resource-managed
kzalloc.

Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
      7c426313
    • E
      can: gs_usb: fix coding style · 540a27ae
      由 Ethan Zonca 提交于 
      This patch fixes five minor style issues, spaces are between bitwise OR
operators.
Signed-off-by: NEthan Zonca <e@ethanzonca.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
      540a27ae
    • E
      can: gs_usb: Don't use stack memory for USB transfers · c919a306
      由 Ethan Zonca 提交于 
      Fixes: 05ca5270 can: gs_usb: add ethtool set_phys_id callback to locate physical device

The gs_usb driver is performing USB transfers using buffers allocated on
the stack. This causes the driver to not function with vmapped stacks.
Instead, allocate memory for the transfer buffers.
Signed-off-by: NEthan Zonca <e@ethanzonca.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v4.8
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
      c919a306
    • A
      ixgbe: Limit use of 2K buffers on architectures with 256B or larger cache lines · c74042f3
      由 Alexander Duyck 提交于 
      On architectures that have a cache line size larger than 64 Bytes we start
running into issues where the amount of headroom for the frame starts
shrinking.

The size of skb_shared_info on a system with a 64B L1 cache line size is
320.  This increases to 384 with a 128B cache line, and 512 with a 256B
cache line.

In addition the NET_SKB_PAD value increases as well consistent with the
cache line size.  As a result when we get to a 256B cache line as seen on
the s390 we end up 768 bytes used by padding and shared info leaving us
with only 1280 bytes to use for data storage.  On architectures such as
this we should default to using 3K Rx buffers out of a 8K page instead of
trying to do 1.5K buffers out of a 4K page.

To take all of this into account I have added one small check so that we
compare the max_frame to the amount of actual data we can store.  This was
already occurring for igb, but I had overlooked it for ixgbe as it doesn't
have strict limits for 82599 once we enable jumbo frames.  By adding this
check we will automatically enable 3K Rx buffers as soon as the maximum
frame size we can handle drops below the standard Ethernet MTU.

I also went through and fixed one small typo that I found where I had left
an IGB in a variable name due to a copy/paste error.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
      c74042f3
    • D
      statx: Add a system call to make enhanced file info available · a528d35e
      由 David Howells 提交于 
      Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.

The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode.  This change is propagated to the vfs_getattr*()
function.

Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.

========
OVERVIEW
========

The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.

A number of requests were gathered for features to be included.  The
following have been included:

 (1) Make the fields a consistent size on all arches and make them large.

 (2) Spare space, request flags and information flags are provided for
     future expansion.

 (3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
     __s64).

 (4) Creation time: The SMB protocol carries the creation time, which could
     be exported by Samba, which will in turn help CIFS make use of
     FS-Cache as that can be used for coherency data (stx_btime).

     This is also specified in NFSv4 as a recommended attribute and could
     be exported by NFSD [Steve French].

 (5) Lightweight stat: Ask for just those details of interest, and allow a
     netfs (such as NFS) to approximate anything not of interest, possibly
     without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
     Dilger] (AT_STATX_DONT_SYNC).

 (6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
     its cached attributes are up to date [Trond Myklebust]
     (AT_STATX_FORCE_SYNC).

And the following have been left out for future extension:

 (7) Data version number: Could be used by userspace NFS servers [Aneesh
     Kumar].

     Can also be used to modify fill_post_wcc() in NFSD which retrieves
     i_version directly, but has just called vfs_getattr().  It could get
     it from the kstat struct if it used vfs_xgetattr() instead.

     (There's disagreement on the exact semantics of a single field, since
     not all filesystems do this the same way).

 (8) BSD stat compatibility: Including more fields from the BSD stat such
     as creation time (st_btime) and inode generation number (st_gen)
     [Jeremy Allison, Bernd Schubert].

 (9) Inode generation number: Useful for FUSE and userspace NFS servers
     [Bernd Schubert].

     (This was asked for but later deemed unnecessary with the
     open-by-handle capability available and caused disagreement as to
     whether it's a security hole or not).

(10) Extra coherency data may be useful in making backups [Andreas Dilger].

     (No particular data were offered, but things like last backup
     timestamp, the data version number and the DOS archive bit would come
     into this category).

(11) Allow the filesystem to indicate what it can/cannot provide: A
     filesystem can now say it doesn't support a standard stat feature if
     that isn't available, so if, for instance, inode numbers or UIDs don't
     exist or are fabricated locally...

     (This requires a separate system call - I have an fsinfo() call idea
     for this).

(12) Store a 16-byte volume ID in the superblock that can be returned in
     struct xstat [Steve French].

     (Deferred to fsinfo).

(13) Include granularity fields in the time data to indicate the
     granularity of each of the times (NFSv4 time_delta) [Steve French].

     (Deferred to fsinfo).

(14) FS_IOC_GETFLAGS value.  These could be translated to BSD's st_flags.
     Note that the Linux IOC flags are a mess and filesystems such as Ext4
     define flags that aren't in linux/fs.h, so translation in the kernel
     may be a necessity (or, possibly, we provide the filesystem type too).

     (Some attributes are made available in stx_attributes, but the general
     feeling was that the IOC flags were to ext[234]-specific and shouldn't
     be exposed through statx this way).

(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
     Michael Kerrisk].

     (Deferred, probably to fsinfo.  Finding out if there's an ACL or
     seclabal might require extra filesystem operations).

(16) Femtosecond-resolution timestamps [Dave Chinner].

     (A __reserved field has been left in the statx_timestamp struct for
     this - if there proves to be a need).

(17) A set multiple attributes syscall to go with this.

===============
NEW SYSTEM CALL
===============

The new system call is:

	int ret = statx(int dfd,
			const char *filename,
			unsigned int flags,
			unsigned int mask,
			struct statx *buffer);

The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat().  There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags.  There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.

Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):

 (1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
     respect.

 (2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
     its attributes with the server - which might require data writeback to
     occur to get the timestamps correct.

 (3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
     network filesystem.  The resulting values should be considered
     approximate.

mask is a bitmask indicating the fields in struct statx that are of
interest to the caller.  The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat().  It should be noted that asking for
more information may entail extra I/O operations.

buffer points to the destination for the data.  This must be 256 bytes in
size.

======================
MAIN ATTRIBUTES RECORD
======================

The following structures are defined in which to return the main attribute
set:

	struct statx_timestamp {
		__s64	tv_sec;
		__s32	tv_nsec;
		__s32	__reserved;
	};

	struct statx {
		__u32	stx_mask;
		__u32	stx_blksize;
		__u64	stx_attributes;
		__u32	stx_nlink;
		__u32	stx_uid;
		__u32	stx_gid;
		__u16	stx_mode;
		__u16	__spare0[1];
		__u64	stx_ino;
		__u64	stx_size;
		__u64	stx_blocks;
		__u64	__spare1[1];
		struct statx_timestamp	stx_atime;
		struct statx_timestamp	stx_btime;
		struct statx_timestamp	stx_ctime;
		struct statx_timestamp	stx_mtime;
		__u32	stx_rdev_major;
		__u32	stx_rdev_minor;
		__u32	stx_dev_major;
		__u32	stx_dev_minor;
		__u64	__spare2[14];
	};

The defined bits in request_mask and stx_mask are:

	STATX_TYPE		Want/got stx_mode & S_IFMT
	STATX_MODE		Want/got stx_mode & ~S_IFMT
	STATX_NLINK		Want/got stx_nlink
	STATX_UID		Want/got stx_uid
	STATX_GID		Want/got stx_gid
	STATX_ATIME		Want/got stx_atime{,_ns}
	STATX_MTIME		Want/got stx_mtime{,_ns}
	STATX_CTIME		Want/got stx_ctime{,_ns}
	STATX_INO		Want/got stx_ino
	STATX_SIZE		Want/got stx_size
	STATX_BLOCKS		Want/got stx_blocks
	STATX_BASIC_STATS	[The stuff in the normal stat struct]
	STATX_BTIME		Want/got stx_btime{,_ns}
	STATX_ALL		[All currently available stuff]

stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.

Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution.  Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.

The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does.  The following
attributes map to FS_*_FL flags and are the same numerical value:

	STATX_ATTR_COMPRESSED		File is compressed by the fs
	STATX_ATTR_IMMUTABLE		File is marked immutable
	STATX_ATTR_APPEND		File is append-only
	STATX_ATTR_NODUMP		File is not to be dumped
	STATX_ATTR_ENCRYPTED		File requires key to decrypt in fs

Within the kernel, the supported flags are listed by:

	KSTAT_ATTR_FS_IOC_FLAGS

[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]

New flags include:

	STATX_ATTR_AUTOMOUNT		Object is an automount trigger

These are for the use of GUI tools that might want to mark files specially,
depending on what they are.

Fields in struct statx come in a number of classes:

 (0) stx_dev_*, stx_blksize.

     These are local system information and are always available.

 (1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
     stx_size, stx_blocks.

     These will be returned whether the caller asks for them or not.  The
     corresponding bits in stx_mask will be set to indicate whether they
     actually have valid values.

     If the caller didn't ask for them, then they may be approximated.  For
     example, NFS won't waste any time updating them from the server,
     unless as a byproduct of updating something requested.

     If the values don't actually exist for the underlying object (such as
     UID or GID on a DOS file), then the bit won't be set in the stx_mask,
     even if the caller asked for the value.  In such a case, the returned
     value will be a fabrication.

     Note that there are instances where the type might not be valid, for
     instance Windows reparse points.

 (2) stx_rdev_*.

     This will be set only if stx_mode indicates we're looking at a
     blockdev or a chardev, otherwise will be 0.

 (3) stx_btime.

     Similar to (1), except this will be set to 0 if it doesn't exist.

=======
TESTING
=======

The following test program can be used to test the statx system call:

	samples/statx/test-statx.c

Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.

Here's some example output.  Firstly, an NFS directory that crosses to
another FSID.  Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.

	[root@andromeda ~]# /tmp/test-statx -A /warthog/data
	statx(/warthog/data) = 0
	results=7ff
	  Size: 4096            Blocks: 8          IO Block: 1048576  directory
	Device: 00:26           Inode: 1703937     Links: 125
	Access: (3777/drwxrwxrwx)  Uid:     0   Gid:  4041
	Access: 2016-11-24 09:02:12.219699527+0000
	Modify: 2016-11-17 10:44:36.225653653+0000
	Change: 2016-11-17 10:44:36.225653653+0000
	Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)

Secondly, the result of automounting on that directory.

	[root@andromeda ~]# /tmp/test-statx /warthog/data
	statx(/warthog/data) = 0
	results=7ff
	  Size: 4096            Blocks: 8          IO Block: 1048576  directory
	Device: 00:27           Inode: 2           Links: 125
	Access: (3777/drwxrwxrwx)  Uid:     0   Gid:  4041
	Access: 2016-11-24 09:02:12.219699527+0000
	Modify: 2016-11-17 10:44:36.225653653+0000
	Change: 2016-11-17 10:44:36.225653653+0000
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      a528d35e
    • P
      ixgbe: update the rss key on h/w, when ethtool ask for it · d3aa9c9f
      由 Paolo Abeni 提交于 
      Currently ixgbe_set_rxfh() updates the rss_key copy in the driver
memory, but does not push the new value into the h/w. This commit
add a new helper for the latter operation and call it in
ixgbe_set_rxfh(), so that the h/w rss key value can be really
updated via ethtool.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
      d3aa9c9f
    • I
      sched/headers: Remove the <linux/mm_types.h> dependency from <linux/sched.h> · 77ba809e
      由 Ingo Molnar 提交于 
      Use the freshly introduced, reduced size <linux/mm_types_task.h> header instead.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      77ba809e
    • I
      sched/headers: Move task_struct::signal and task_struct::sighand types and... · c3edc401
      由 Ingo Molnar 提交于 
      sched/headers: Move task_struct::signal and task_struct::sighand types and accessors into <linux/sched/signal.h>

task_struct::signal and task_struct::sighand are pointers, which would normally make it
straightforward to not define those types in sched.h.

That is not so, because the types are accompanied by a myriad of APIs (macros and inline
functions) that dereference them.

Split the types and the APIs out of sched.h and move them into a new header, <linux/sched/signal.h>.

With this change sched.h does not know about 'struct signal' and 'struct sighand' anymore,
trying to put accessors into sched.h as a test fails the following way:

  ./include/linux/sched.h: In function ‘test_signal_types’:
  ./include/linux/sched.h:2461:18: error: dereferencing pointer to incomplete type ‘struct signal_struct’
                    ^

This reduces the size and complexity of sched.h significantly.

Update all headers and .c code that relied on getting the signal handling
functionality from <linux/sched.h> to include <linux/sched/signal.h>.

The list of affected files in the preparatory patch was partly generated by
grepping for the APIs, and partly by doing coverage build testing, both
all[yes|mod|def|no]config builds on 64-bit and 32-bit x86, and an array of
cross-architecture builds.

Nevertheless some (trivial) build breakage is still expected related to rare
Kconfig combinations and in-flight patches to various kernel code, but most
of it should be handled by this patch.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      c3edc401
    • A
      xen-netback: Use GFP_ATOMIC to allocate hash · 9f674e48
      由 Anoob Soman 提交于 
      Allocation of new_hash, inside xenvif_new_hash(), always happen
in softirq context, so use GFP_ATOMIC instead of GFP_KERNEL for new
hash allocation.
Signed-off-by: NAnoob Soman <anoob.soman@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9f674e48
    • W
      bonding: use ETH_MAX_MTU as max mtu · 31c05415
      由 WANG Cong 提交于 
      This restores the ability of setting bond device's mtu to 9000.

Fixes: 91572088 ("net: use core MTU range checking in core net infra")
Reported-by: daznis@gmail.com
Reported-by: NBrad Campbell <lists2009@fnarfbargle.com>
Cc: Jarod Wilson <jarod@redhat.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NJay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      31c05415
    • D
      netvsc: fix use-after-free in netvsc_change_mtu() · 152669bd
      由 Dexuan Cui 提交于 
      'nvdev' is freed in rndis_filter_device_remove -> netvsc_device_remove ->
free_netvsc_device, so we mustn't access it, before it's re-created in
rndis_filter_device_add -> netvsc_device_add.
Signed-off-by: NDexuan Cui <decui@microsoft.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Reviewed-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      152669bd
    • D
      drivers: net: ethernet: remove incorrect __exit markups · be12502e
      由 Dmitry Torokhov 提交于 
      Even if bus is not hot-pluggable, devices can be unbound from the
driver via sysfs, so we should not be using __exit annotations on
remove() methods. The only exception is drivers registered with
platform_driver_probe() which specifically disables sysfs bind/unbind
attributes.
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      be12502e
    • G
      cxgb4: update latest firmware version supported · 11bd44f6
      由 Ganesh Goudar 提交于 
      Change t4fw_version.h to update latest firmware version
number to 1.16.33.0.
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      11bd44f6
    • L
      amd-xgbe: Don't overwrite SFP PHY mod_absent settings · 2697ea5a
      由 Lendacky, Thomas 提交于 
      If an SFP module is not present, xgbe_phy_sfp_phy_settings() should
return after applying the default settings. Currently there is no return
statement and the default settings are overwritten.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      2697ea5a
    • L
      amd-xgbe: Be sure to set MDIO modes on device (re)start · b42c6761
      由 Lendacky, Thomas 提交于 
      The MDIO register mode is set when the device is probed. But when the
device is brought down and then back up, the MDIO register mode has been
reset.  Be sure to reset the mode during device startup and only change
the mode of the address specified.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b42c6761
    • L
      amd-xgbe: Stop the PHY before releasing interrupts · 402168b4
      由 Lendacky, Thomas 提交于 
      Some configurations require the use of the hardware's MDIO support to
communicate with external PHYs. The MDIO commands indicate completion
through the device interrupt. When bringing down the device the interrupts
were released before stopping the external PHY, resulting in MDIO command
timeouts. Move the stopping of the PHY to before the releasing of the
interrupts.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      402168b4
    • A
      drivers: net: xgene: Fix crash on DT systems · 9aea7779
      由 Alban Bedel 提交于 
      On DT systems the driver require a clock, but the probe just print a
warning and continue, leading to a crash when resetting the device.
To fix this crash and properly handle probe deferals only ignore the
missing clock if DT isn't used or if the clock doesn't exist.
Signed-off-by: NAlban Bedel <alban.bedel@avionic-design.de>
Acked-by: NIyappan Subramanian <isubramanian@apm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9aea7779
  13. 02 3月, 2017 7 次提交