This reverts commit b0268726, which has
been linked to several problem reports with IO-APIC and the timer.
Machines either don't boot because the timer doesn't happen, or we get
double timer interrupts because we end up double-routing the timer irq
through multiple interfaces.

See for example

	http://lkml.org/lkml/2006/12/16/101
	http://lkml.org/lkml/2007/1/3/9
	http://bugzilla.kernel.org/show_bug.cgi?id=7789

about some of the discussion.

Patches to fix this cleanup exist (and have been confirmed to work fine
at least for some of the affected cases) and we'll revisit it for
2.6.21, but this late in the -rc series we're better off just reverting
the incomplete commit that caused the problems.
Suggested-by: NAdrian Bunk <bunk@stusta.de>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Yinghai Lu <yinghai.lu@amd.com>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This reverts commit 59287c09.

Hugh Dickins reports that it causes random failures on x86 with SuSE
10.2, and points out

  "Isn't that randomization, anywhere from 0x10000 to ELF_ET_DYN_BASE,
   sure to place the ET_DYN from time to time just where the comment
   says it's trying to avoid? I assume that somehow results in the error
   reported."

(where the comment in question is the existing comment in the source
code about mmap/brk clashes).
Suggested-by: NHugh Dickins <hugh@veritas.com>
Acked-by: NMarcus Meissner <meissner@suse.de>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  [PATCH] Driver core: Fix prefix driver links in /sys/module by bus-name

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6:
  [PATCH] PCI: disable PCI_MULTITHREAD_PROBE

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: asix: Fix AX88772 device PHY selection
  USB: usblp.c - add Kyocera Mita FS 820 to list of "quirky" printers
  sisusb_con warning fixes
  USB: Fixed bug in endpoint release function.
  USB: small update to Documentation/usb/acm.txt
  USB storage: fix ipod ejecting issue
  USB Storage: unusual_devs: add supertop drives
  USB: omap_udc build fixes (sync with linux-omap)
  USB: funsoft is borken on sparc
  USB: fix interaction between different interfaces in an "Option" usb device
  UHCI: support device_may_wakeup
  UHCI: make test for ASUS motherboard more specific

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c/m41t00: Do not forget to write year
  i2c-mv64xxx: Fix random oops at boot
  i2c: Migration aids for i2c_adapter.dev removal
  i2c-pnx: Add entry to MAINTAINERS
  i2c-pnx: Fix interrupt handler, get rid of EARLY config option

On ia64, the various functions that make up cn_proc.c cause kernel
unaligned access errors.

If you are using these, for example, to get notification about all tasks
forking and exiting, you get multiple unaligned access errors per process.

Use put_unaligned() in the appropriate palces to fix this.
Signed-off-by: NErik Jacobson <erikj@sgi.com>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: <stable@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

At the end of shrink_all_memory() we forget to recalculate lru_pages: it can
be zero.

Fix that up, and add a helper function for this operation too.

Also, recalculate lru_pages each time around the inner loop to get the
balancing correct.

Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Looks like this is the problem, which point Al Viro some time ago:

ufs's get_block callback allocates 16k of disk at a time, and links that
entire 16k into the file's metadata.  But because get_block is called for only
a single buffer_head (a 2k buffer_head in this case?) we are only able to tell
the VFS that this 2k is buffer_new().

So when ufs_getfrag_block() is later called to map some more data in the file,
and when that data resides within the remaining 14k of this fragment,
ufs_getfrag_block() will incorrectly return a !buffer_new() buffer_head.

I don't see _right_ way to do nullification of whole block, if use inode
page cache, some pages may be outside of inode limits (inode size), and
will be lost; if use blockdev page cache it is possible to zero real data,
if later inode page cache will be used.

The simpliest way, as can I see usage of block device page cache, but not only
mark dirty, but also sync it during "nullification".  I use my simple tests
collection, which I used for check that create,open,write,read,close works on
ufs, and I see that this patch makes ufs code 18% slower then before.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These days, if you swapoff when there isn't enough memory, OOM killer gives
"BUG: scheduling while atomic" and the machine hangs: badness() needs to do
its PF_SWAPOFF return after the task_unlock (tasklist_lock is also held
here, so p isn't going to be freed: PF_SWAPOFF might get turned off at any
moment, but that doesn't really matter).
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

write_lcd() in toshiba_acpi returns 0 on success since the big ACPI patch
merged in 2.6.20-rc2.  It should return count.
Signed-off-by: NMatthijs van Otterdijk <thotter@gmail.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

qconf may cause SIGSEGV by trying to show debug information on empty menu
items
Signed-off-by: NCyrill V. Gorcunov <gorcunov@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Both process_zones() and drain_node_pages() check for populated zones
before touching pagesets.  However, __drain_pages does not do so,

This may result in a NULL pointer dereference for pagesets in unpopulated
zones if a NUMA setup is combined with cpu hotplug.

Initially the unpopulated zone has the pcp pointers pointing to the boot
pagesets.  Since the zone is not populated the boot pageset pointers will
not be changed during page allocator and slab bootstrap.

If a cpu is later brought down (first call to __drain_pages()) then the pcp
pointers for cpus in unpopulated zones are set to NULL since __drain_pages
does not first check for an unpopulated zone.

If the cpu is then brought up again then we call process_zones() which will
ignore the unpopulated zone.  So the pageset pointers will still be NULL.

If the cpu is then again brought down then __drain_pages will attempt to
drain pages by following the NULL pageset pointer for unpopulated zones.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The HPT37x driver very carefully handles DMA completions and the needed
fixups are done on pci registers 0x50 and 0x52.  This is unfortunate
because the actual registers are 0x50 and 0x54.  Fixing this offset cures
the second channel problems reported.

Secondly there are some problems with the HPT370 and certain ATA drives.
The filter code however only filters ATAPI devices due to a reversed type
check.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Acked-by: NAlan Cox <alan@redhat.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

No need to test for rflags.if as both VT and SVM specs assure us that on exit
caused from interrupt window opening, 'if' is set.
Signed-off-by: NDor Laor <dor.laor@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Small optimization/cleanup:

    page == page_header(page->page_hpa)
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Prevent the guest's loading of a corrupt cr3 (pointing at no guest phsyical
page) from crashing the host.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If we emulate a write, we fail to set the dirty bit on the guest pte, leading
the guest to believe the page is clean, and thus lose data.  Bad.

Fix by setting the guest pte dirty bit under such conditions.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It overwrites the right cr3 set from mmu setup.  Happens only with the test
harness.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fixes oops on early close of /dev/kvm.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This will allow us to see the root cause when a vmwrite error happens.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAvi Kivity <avi@qumranet.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

mmu_destroy flushes the guest tlb (indirectly), which needs a valid vcpu.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If we reduce permissions on a pte, we must flush the cached copy of the pte
from the guest's tlb.

This is implemented at the moment by flushing the entire guest tlb, and can be
improved by flushing just the relevant virtual address, if it is known.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAvi Kivity <avi@qumranet.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The mmu sometimes needs memory for reverse mapping and parent pte chains.
however, we can't allocate from within the mmu because of the atomic context.

So, move the allocations to a central place that can be executed before the
main mmu machinery, where we can bail out on failure before any damage is
done.

(error handling is deffered for now, but the basic structure is there)
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Because mmu pages have attached rmap and parent pte chain structures, we need
to zap them before freeing so the attached structures are freed.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAvi Kivity <avi@qumranet.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

cmpxchg8b uses edx:eax as the compare operand, not edi:eax.

cmpxchg8b is used by 32-bit pae guests to set page table entries atomically,
and this is emulated touching shadowed guest page tables.

Also, implement it for 32-bit hosts.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We always need cr3 to point to something valid, so if we detect that we're
freeing a root page, simply push it back to the top of the active list.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In fork() (or when we protect a page that is no longer a page table), we can
experience floods of writes to a page, which have to be emulated.  This is
expensive.

So, if we detect such a flood, zap the page so subsequent writes can proceed
natively.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAvi Kivity <avi@qumranet.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAvi Kivity <avi@qumranet.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAvi Kivity <avi@qumranet.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A misaligned access affects two shadow ptes instead of just one.

Since a misaligned access is unlikely to occur on a real page table, just zap
the page out of existence, avoiding further trouble.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Unused.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>