- 21 2月, 2013 27 次提交
-
-
由 David Howells 提交于
A patch to fix some unreachable code in search_my_process_keyrings() got applied twice by two different routes upstream as commits e67eab39 and b010520a (both "fix unreachable code"). Unfortunately, the second application removed something it shouldn't have and this wasn't detected by GIT. This is due to the patch not having sufficient lines of context to distinguish the two places of application. The effect of this is relatively minor: inside the kernel, the keyring search routines may search multiple keyrings and then prioritise the errors if no keys or negative keys are found in any of them. With the extra deletion, the presence of a negative key in the thread keyring (causing ENOKEY) is incorrectly overridden by an error searching the process keyring. So revert the second application of the patch. Signed-off-by: NDavid Howells <dhowells@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next由 Linus Torvalds 提交于
Pull networking update from David Miller: 1) Checkpoint/restarted TCP sockets now can properly propagate the TCP timestamp offset. From Andrey Vagin. 2) VMWARE VM VSOCK layer, from Andy King. 3) Much improved support for virtual functions and SR-IOV in bnx2x, from Ariel ELior. 4) All protocols on ipv4 and ipv6 are now network namespace aware, and all the compatability checks for initial-namespace-only protocols is removed. Thanks to Tom Parkin for helping deal with the last major holdout, L2TP. 5) IPV6 support in netpoll and network namespace support in pktgen, from Cong Wang. 6) Multiple Registration Protocol (MRP) and Multiple VLAN Registration Protocol (MVRP) support, from David Ward. 7) Compute packet lengths more accurately in the packet scheduler, from Eric Dumazet. 8) Use per-task page fragment allocator in skb_append_datato_frags(), also from Eric Dumazet. 9) Add support for connection tracking labels in netfilter, from Florian Westphal. 10) Fix default multicast group joining on ipv6, and add anti-spoofing checks to 6to4 and 6rd. From Hannes Frederic Sowa. 11) Make ipv4/ipv6 fragmentation memory limits more reasonable in modern times, rearrange inet frag datastructures for better cacheline locality, and move more operations outside of locking. From Jesper Dangaard Brouer. 12) Instead of strict master <--> slave relationships, allow arbitrary scenerios with "upper device lists". From Jiri Pirko. 13) Improve rate limiting accuracy in TBF and act_police, also from Jiri Pirko. 14) Add a BPF filter netfilter match target, from Willem de Bruijn. 15) Orphan and delete a bunch of pre-historic networking drivers from Paul Gortmaker. 16) Add TSO support for GRE tunnels, from Pravin B SHelar. Although this still needs some minor bug fixing before it's %100 correct in all cases. 17) Handle unresolved IPSEC states like ARP, with a resolution packet queue. From Steffen Klassert. 18) Remove TCP Appropriate Byte Count support (ABC), from Stephen Hemminger. This was long overdue. 19) Support SO_REUSEPORT, from Tom Herbert. 20) Allow locking a socket BPF filter, so that it cannot change after a process drops capabilities. 21) Add VLAN filtering to bridge, from Vlad Yasevich. 22) Bring ipv6 on-par with ipv4 and do not cache neighbour entries in the ipv6 routes, from YOSHIFUJI Hideaki. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1538 commits) ipv6: fix race condition regarding dst->expires and dst->from. net: fix a wrong assignment in skb_split() ip_gre: remove an extra dst_release() ppp: set qdisc_tx_busylock to avoid LOCKDEP splat atl1c: restore buffer state net: fix a build failure when !CONFIG_PROC_FS net: ipv4: fix waring -Wunused-variable net: proc: fix build failed when procfs is not configured Revert "xen: netback: remove redundant xenvif_put" net: move procfs code to net/core/net-procfs.c qmi_wwan, cdc-ether: add ADU960S bonding: set sysfs device_type to 'bond' bonding: fix bond_release_all inconsistencies b44: use netdev_alloc_skb_ip_align() xen: netback: remove redundant xenvif_put net: fec: Do a sanity check on the gpio number ip_gre: propogate target device GSO capability to the tunnel device ip_gre: allow CSUM capable devices to handle packets bonding: Fix initialize after use for 3ad machine state spinlock bonding: Fix race condition between bond_enslave() and bond_3ad_update_lacp_rate() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
Pull sparc updates from David Miller: "Mostly more sparc64 THP bug fixes, and a refactoring of SMP bootup on sparc32 from Sam Ravnborg." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc32: refactor smp boot sparc64: Fix huge PMD to PTE translation for sun4u in TLB miss handler. sparc64: Fix tsb_grow() in atomic context. sparc64: Handle hugepage TSB being NULL. sparc64: Fix gfp_flags setting in tsb_grow().
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64由 Linus Torvalds 提交于
Pull arm64 patches from Catalin Marinas: - SMP support for the PSCI booting protocol (power state coordination interface). - Simple earlyprintk support. - Platform devices populated by default from the DT (SoC-agnostic). - CONTEXTIDR support (used by external trace tools). * tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: mm: update CONTEXTIDR register to contain PID of current process arm64: atomics: fix grossly inconsistent asm constraints for exclusives arm64: compat: use compat_uptr_t type for compat_ucontext.uc_link arm64: Select ARCH_WANT_FRAME_POINTERS arm64: Add kvm_para.h and xor.h generic headers arm64: SMP: enable PSCI boot method arm64: psci: add support for PSCI invocations from the kernel arm64: SMP: rework the SMP code to be enabling method agnostic arm64: perf: add guest vs host discrimination arm64: add COMPAT_PSR_*_BIT flags arm64: Add simple earlyprintk support arm64: Populate the platform devices
-
git://git.linaro.org/people/rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM updates (part two) from Russell King: - breakpoint and perf updates from Will Deacon. - hypervisor boot mode updates from Will. - support for Power State Coordination Interface via the Hypervisor - core ARM support for KVM * 'for-linus-2' of git://git.linaro.org/people/rmk/linux-arm: (32 commits) KVM: ARM: Add maintainer entry for KVM/ARM KVM: ARM: Power State Coordination Interface implementation KVM: ARM: Handle I/O aborts KVM: ARM: Handle guest faults in KVM KVM: ARM: VFP userspace interface KVM: ARM: Demux CCSIDR in the userspace API KVM: ARM: User space API for getting/setting co-proc registers KVM: ARM: Emulation framework and CP15 emulation KVM: ARM: World-switch implementation KVM: ARM: Inject IRQs and FIQs from userspace KVM: ARM: Memory virtualization setup KVM: ARM: Hypervisor initialization KVM: ARM: Initial skeleton to compile KVM support ARM: Section based HYP idmap ARM: Add page table and page defines needed by KVM ARM: perf: simplify __hw_perf_event_init err handling ARM: perf: remove unnecessary checks for idx < 0 ARM: perf: handle armpmu_register failing ARM: perf: don't pretend to support counting of L1I writes ARM: perf: remove redundant NULL check on cpu_pmu ...
-
git://git.linaro.org/people/rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM updates (part one) from Russell King: - MMC patches from Ulf Hansson and Pawel Moll. These add support for DDR mode and the latest variant found on ARM Versatile Express, as well as a number of cleanups. - A fix for to improve the behaviour of ARMs sched_clock() - Changes to the ARM ioremap() code. I'm not convinced with the primary arguments for this, but it's been around for a while, and people seem happy with it - and the "other" justification for this is at http://lkml.org/lkml/2012/12/6/184 - Add SCHED_HRTICK to ARMs Kconfig - Making the ARM SHA/AES code Thumb-2 compatible - A collection of other small updates. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (26 commits) ARM: add SCHED_HRTICK config option ARM: 7650/1: mm: replace direct access to mm->context.id with new macro ARM: 7649/1: mm: mm->context.id fix for big-endian ARM: 7648/1: pci: Allow passing per-controller private data ARM: 7647/1: pci: Keep pci_common_init() around after init ARM: fix warnings introduced by previous patch ARM: 7646/1: mm: use static_vm for managing static mapped areas ARM: 7645/1: ioremap: introduce an infrastructure for static mapped area ARM: 7644/1: vmregion: remove vmregion code entirely MAINTAINERS: Re-assert MMCI driver maintainer status MAINTAINERS: add additional file for MMCI driver MAINTAINERS: add maintainer entry for AMBA serial drivers ARM: 7637/1: memory: use SZ_ constants for defining the virtual memory layout ARM: 7643/1: sched: correct update_sched_clock() ARM: 7635/1: versatile: fix the PCI IRQ regression ARM: 7639/1: cache-l2x0: add missed dummy outer_resume entry ARM: 7630/1: mmc: mmci: Fixup and cleanup code for DMA handling ARM: 7632/1: spinlock: avoid exclusive accesses on unlock() path ARM: 7631/1: mmc: mmci: Add new VE MMCI variant ARM: 7623/1: mmc: mmci: Fixup clock gating when freq is 0 for ST-variants ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k由 Linus Torvalds 提交于
Pull m68k update from Geert Uytterhoeven. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Sort out !CONFIG_MMU_SUN3 vs. CONFIG_HAS_DMA swim: Add missing spinlock init
-
由 Sam Ravnborg 提交于
Introduce a common smp_callin() function to call from trampoline_32.S. Add platform specific functions to handle the platform details. This is in preparation for a patch that will unify the smp boot stuff for all architectures. sparc32 was significantly different to warrant this patch in preparation. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Acked-by: NDavid S. Miller <davem@davemloft.net> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
When we set the sun4u version of the PTE execute bit, it's: or REG, _PAGE_EXEC_4U, REG _PAGE_EXEC_4U is 0x1000, unfortunately the immedate field of the 'or' instruction is a signed 13-bit value. So the above actually assembles into: or REG, -4096, REG completely corrupting the final PTE value. Set it with a: sethi %hi(_PAGE_EXEC_4U), TMP or REG, TMP, REG sequence instead. This fixes "git gc" crashes on sun4u machines. Reported-by: NMeelis Roos <mroos@linux.ee> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Eric Dumazet wrote: | Some strange crashes happen in rt6_check_expired(), with access | to random addresses. | | At first glance, it looks like the RTF_EXPIRES and | stuff added in commit 1716a961 | (ipv6: fix problem with expired dst cache) | are racy : same dst could be manipulated at the same time | on different cpus. | | At some point, our stack believes rt->dst.from contains a dst pointer, | while its really a jiffie value (as rt->dst.expires shares the same area | of memory) | | rt6_update_expires() should be fixed, or am I missing something ? | | CC Neil because of https://bugzilla.redhat.com/show_bug.cgi?id=892060 Because we do not have any locks for dst_entry, we cannot change essential structure in the entry; e.g., we cannot change reference to other entity. To fix this issue, split 'from' and 'expires' field in dst_entry out of union. Once it is 'from' is assigned in the constructor, keep the reference until the very last stage of the life time of the object. Of course, it is unsafe to change 'from', so make rt6_set_from simple just for fresh entries. Reported-by: NEric Dumazet <eric.dumazet@gmail.com> Reported-by: NNeil Horman <nhorman@tuxdriver.com> CC: Gao Feng <gaofeng@cn.fujitsu.com> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Reviewed-by: NEric Dumazet <edumazet@google.com> Reported-by: NSteinar H. Gunderson <sesse@google.com> Reviewed-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amerigo Wang 提交于
commit c9af6db4 (net: Fix possible wrong checksum generation) has a suspicous piece: - skb_shinfo(skb1)->gso_type = skb_shinfo(skb)->gso_type; - + skb_shinfo(skb)->tx_flags = skb_shinfo(skb1)->tx_flags & SKBTX_SHARED_FRAG; skb1 is the new skb, therefore should be on the left side of the assignment. This patch fixes it. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <amwang@redhat.com> Acked-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp由 Linus Torvalds 提交于
Pull EDAC updates from Borislav Petkov: "Mostly AMD's side of EDAC. It is basically a new family enablement stuff: AMD F16h MCE decoding enablement from Jacob Shin. The rest is trivial cleanups." * tag 'edac_3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: mpc85xx_edac: Fix typo EDAC, MCE, AMD: Remove unneeded exports EDAC, MCE, AMD: Add MCE decoding support for Family 16h EDAC, MCE, AMD: Make MC2 decoding per-family amd64_edac: Remove dead code
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI and power management updates from Rafael Wysocki: - Rework of the ACPI namespace scanning code from Rafael J. Wysocki with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg, Toshi Kani, and Yinghai Lu. - ACPI power resources handling and ACPI device PM update from Rafael J Wysocki. - ACPICA update to version 20130117 from Bob Moore and Lv Zheng with contributions from Aaron Lu, Chao Guan, Jesper Juhl, and Tim Gardner. - Support for Intel Lynxpoint LPSS from Mika Westerberg. - cpuidle update from Len Brown including Intel Haswell support, C1 state for intel_idle, removal of global pm_idle. - cpuidle fixes and cleanups from Daniel Lezcano. - cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri with contributions from Stratos Karafotis and Rickard Andersson. - Intel P-states driver for Sandy Bridge processors from Dirk Brandewie. - cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn. - cpufreq fixes related to ordering issues between acpi-cpufreq and powernow-k8 from Borislav Petkov and Matthew Garrett. - cpufreq support for Calxeda Highbank processors from Mark Langsdorf and Rob Herring. - cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update from Shawn Guo. - cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat, and Inderpal Singh. - Support for "lightweight suspend" from Zhang Rui. - Removal of the deprecated power trace API from Paul Gortmaker. - Assorted updates from Andreas Fleig, Colin Ian King, Davidlohr Bueso, Joseph Salisbury, Kees Cook, Li Fei, Nishanth Menon, ShuoX Liu, Srinivas Pandruvada, Tejun Heo, Thomas Renninger, and Yasuaki Ishimatsu. * tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (267 commits) PM idle: remove global declaration of pm_idle unicore32 idle: delete stray pm_idle comment openrisc idle: delete pm_idle mn10300 idle: delete pm_idle microblaze idle: delete pm_idle m32r idle: delete pm_idle, and other dead idle code ia64 idle: delete pm_idle cris idle: delete idle and pm_idle ARM64 idle: delete pm_idle ARM idle: delete pm_idle blackfin idle: delete pm_idle sparc idle: rename pm_idle to sparc_idle sh idle: rename global pm_idle to static sh_idle x86 idle: rename global pm_idle to static x86_idle APM idle: register apm_cpu_idle via cpuidle cpufreq / intel_pstate: Add kernel command line option disable intel_pstate. cpufreq / intel_pstate: Change to disallow module build tools/power turbostat: display SMI count by default intel_idle: export both C1 and C1E ACPI / hotplug: Fix concurrency issues and memory leaks ...
-
git://git.secretlab.ca/git/linux由 Linus Torvalds 提交于
Pull device tree changes from Grant Likely: "All around device tree changes destined for v3.8. Aside from the documentation updates the highlights in this branch include: - Kbuild changes for using CPP with .dts files - locking fix from preempt_rt patchset - include DT alias names in device uevent - Selftest bugfixes and improvements - New function for counting phandles stanzas in a property - constify argument to of_node_full_name() - Various bug fixes This tree did also contain a commit to use platform_device_add instead of open-coding the device add code, but it caused problems with amba devices and needed to be reverted." * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: (23 commits) Revert "of: use platform_device_add" kbuild: limit dtc+cpp include path gpio: Make of_count_named_gpios() use new of_count_phandle_with_args() of: Create function for counting number of phandles in a property of/base: Clean up exit paths for of_parse_phandle_with_args() of/selftest: Use selftest() macro throughout of/selftest: Fix GPIOs selftest to cover the 7th case of: fix recursive locking in of_get_next_available_child() documentation/devicetree: Fix a typo in exynos-dw-mshc.txt OF: convert devtree lock from rw_lock to raw spinlock of/exynos_g2d: Add Bindings for exynos G2D driver kbuild: create a rule to run the pre-processor on *.dts files input: Extend matrix-keypad device tree binding devicetree: Move NS2 LEDs binding into LEDs directory of: use platform_device_add powerpc/5200: Fix size to request_mem_region() call documentation/devicetree: Fix typos of: add 'const' to of_node_full_name parameter of: Output devicetree alias names in uevent DT: add vendor prefixes for Renesas and Toshiba ...
-
git://git.secretlab.ca/git/linux由 Linus Torvalds 提交于
Pull SPI changes from Grant Likely: "Changes to both core spi code and spi device drivers. The driver changes are the usual set of bug fixes and platform enablement. Core code changes include: - More intelligent assignment of SPI bus numbers when using DT - Common mechanism for using gpios as CS lines - Pull checks for bits_per_word and transfer speed out of drivers and into core code - Ensure temporary DMA buffers are DMA safe" * tag 'spi-for-linus' of git://git.secretlab.ca/git/linux: (50 commits) spi: Document cs_gpios and cs_gpio in kernel-doc spi/of: Fix initialization of cs_gpios array spi/pxa2xx: add support for Lynxpoint SPI controllers spi/pxa2xx: add support for Intel Low Power Subsystem SPI spi/pxa2xx: add support for SPI_LOOP spi/pxa2xx: add support for runtime PM spi/pxa2xx: add support for DMA engine spi/pxa2xx: break out the private DMA API usage into a separate file spi/ath79: add shutdown handler spi/mips-lantiq: set SPI_MASTER_HALF_DUPLEX flag spi/mips-lantiq: make use of spi_finalize_current_message spi/bcm63xx: work around inability to keep CS up spi/davinci: use request_threaded_irq() to fix deadlock spi/orion: Use module_platform_driver() spi/bcm63xx: reject transfers unable to transfer spi: Ensure memory used for spi_write_then_read() is DMA safe spi/spi-mpc512x-psc: init mode bits supported by the driver spi/mpc512x-psc: don't use obsolet cell-index property spi: Remove erroneous __init, __exit and __exit_p() references in drivers spi/s3c64xx: fix checkpatch warnings and error ...
-
git://git.linaro.org/people/mturquette/linux由 Linus Torvalds 提交于
Pull clock framework update from Michael Turquette: "The common clock framework changes for 3.9 are almost entirely fixes. None are dire enough to be Cc'd to stable which may be interpreted to mean that users of the framework are reaching stability. Lots of new adoption of this framework is via DeviceTree data and that comes through the respective architecture and platform trees instead of through the clk framework tree. Two new features are improved debugfs output and an improvement to how DT clocks are initialized by reusing a common method." * tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux: (25 commits) clk: sunxi: remove stale Makefile entry clk: vexpress: Use common of_clk_init() function clk: zynq: Use common of_clk_init() function clk: vt8500: Use common of_clk_init() function clk: highbank: Use common of_clk_init() function clk: sunxi: Use common of_clk_init() function clk: add common of_clk_init() function clk: Deduplicate exit code in clk_set_rate clk: beautify Makefile clk-divider: fix macros clk: prima2: enable dt-binding clkdev mapping clk: mxs: Index is always positive clk: max77686: Avoid double free at remove time clk: remove exported function from __init section clk: vt8500: Add support for WM8750/WM8850 PLL clocks clk: vt8500: Fix division-by-0 when requested rate=0 clk: vt8500: Fix device clock divisor calculations clk: vt8500: Fix error in PLL calculations on non-exact match. clk: max77686: Remove unnecessary NULL checking for container_of() clk: JSON debugfs clock tree summary ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input updates from Dmitry Torokhov: "Two new touchpad drivers - Cypress APA I2C Trackpad and Cypress PS/2 touchpad and a big update to ALPS driver from Kevin Cernekee that adds support for "Rushmore" touchpads and paves way for adding support for "Dolphin" touchpads. There is also a new input driver for Goldfish emulator and also Android keyreset driver was folded into SysRq code. A few more drivers were updated with device tree bindings and others got some small cleanups and fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (55 commits) Input: cyttsp-spi - remove duplicate MODULE_ALIAS() Input: tsc2005 - add MODULE_ALIAS Input: tegra-kbc - require CONFIG_OF, remove platform data Input: synaptics - initialize pointer emulation usage Input: MT - do not apply filtering on emulated events Input: bma150 - make some defines public and fix some comments Input: bma150 - fix checking pm_runtime_get_sync() return value Input: ALPS - enable trackstick on Rushmore touchpads Input: ALPS - add support for "Rushmore" touchpads Input: ALPS - make the V3 packet field decoder "pluggable" Input: ALPS - move pixel and bitmap info into alps_data struct Input: ALPS - fix command mode check Input: ALPS - rework detection of Pinnacle AGx touchpads Input: ALPS - move {addr,nibble}_command settings into alps_set_defaults() Input: ALPS - use function pointers for different protocol handlers Input: ALPS - rework detection sequence Input: ALPS - introduce helper function for repeated commands Input: ALPS - move alps_get_model() down below hw_init code Input: ALPS - copy "model" info into alps_data struct Input: ALPS - document the alps.h data structures ...
-
git://git.infradead.org/battery-2.6由 Linus Torvalds 提交于
Pull battery updates from Anton Vorontsov: "Four new drivers: - goldfish_battery: This is Android Emulator battery driver. Originally from Google, but Intel folks reshaped it for mainline - pm2301_charger: A new driver for ST-Ericsson 2301 Power Management chip, uses AB8500 battery management core - qnap-poweroff: The driver adds poweroff functionality for QNAP NAS boxes - restart-poweroff: A generic driver that implements 'power off by restarting'. The actual poweroff functionality is implemented through a bootloader, so Linux' task is just to restart the box. The driver is useful on Buffalo Linkstation LS-XHL and LS-CHLv2 boards. Andrew Lunn worked on submitting the driver (as well as qnap-poweroff above). Additionally: - A lot of fixes for ab8500 drivers. This is a part of efforts of syncing internal ST-Ericsson development tree with the mainline. Lee Jones @ Linaro worked on compilation and reshaping these series. - New health properties for the power supplies: "Watchdog timer expire" and "Safety timer expire" - As usual, a bunch of fixes/cleanups here and there" * tag 'for-v3.9' of git://git.infradead.org/battery-2.6: (81 commits) bq2415x_charger: Add support for offline and 100mA mode generic-adc-battery: Fix forever loop in gab_remove() goldfish_battery: Add missing GENERIC_HARDIRQS dependency da9030_battery: Include notifier.h bq27x00_battery: Fix reporting battery temperature power/reset: Remove newly introduced __dev* annotations lp8727_charger: Small cleanup in naming ab8500_btemp: Demote initcall sequence ds2782_battery: Add power_supply_changed() calls for proper uevent support power: Add battery driver for goldfish emulator u8500-charger: Delay for USB enumeration ab8500-bm: Remove individual [charger|btemp|fg|chargalg] pdata structures ab8500-charger: Do not touch VBUSOVV bits ab8500-fg: Use correct battery charge full design pm2301: LPN mode control support pm2301: Enable vbat low monitoring ab8500-bm: Flush all work queues before suspending ab8500-fg: Go to INIT_RECOVERY when charger removed ab8500-charger: Add support for autopower on AB8505 and AB9540 abx500-chargalg: Add new sysfs interface to get current charge status ... Fix up fairly straightforward conflicts in the ab8500 driver. But since it seems to be ARM-specific, I can't even compile-test the result..
-
由 David S. Miller 提交于
If our first THP installation for an MM is via the set_pmd_at() done during khugepaged's collapsing we'll end up in tsb_grow() trying to do a GFP_KERNEL allocation with several locks held. Simply using GFP_ATOMIC in this situation is not the best option because we really can't have this fail, so we'd really like to keep this an order 0 GFP_KERNEL allocation if possible. Also, doing the TSB allocation from khugepaged is a really bad idea because we'll allocate it potentially from the wrong NUMA node in that context. So what we do is defer the hugepage TSB allocation until the first TLB miss we take on a hugepage. This is slightly tricky because we have to handle two unusual cases: 1) Taking the first hugepage TLB miss in the window trap handler. We'll call the winfix_trampoline when that is detected. 2) An initial TSB allocation via TLB miss races with a hugetlb fault on another cpu running the same MM. We handle this by unconditionally loading the TSB we see into the current cpu even if it's non-NULL at hugetlb_setup time. Reported-by: NMeelis Roos <mroos@ut.ee> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Accomodate the possibility that the TSB might be NULL at the point that update_mmu_cache() is invoked. This is necessary because we will sometimes need to defer the TSB allocation to the first fault that happens in the 'mm'. Seperate out the hugepage PTE test into a seperate function so that the logic is clearer. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
We should "|= more_flags" rather than "= more_flags". Reported-by: NDavid Rientjes <rientjes@google.com> Acked-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging由 Linus Torvalds 提交于
Pull hwmon updates from Guenter Roeck: - New drivers for MAX6697 and compatibles and for INA209. - Added support for IT8771E, IT8772E, MAX34460, MAX34461, MCP98244, and ADT7420 to existing drivers. - Added support for additional attributes to various drivers. - Replaced SENSORS_LIMIT with clamp_val; retire SENSORS_LIMIT; - Clean up PMBus code to reduce its size; clean up adt7410 driver. - A couple of minor bug fixes as well as documentation cleanup. - Out-of-tree change: Replace SENSORS_LIMIT with clamp_val in platform/x86/eeepc-laptop driver. * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (32 commits) hwmon: (ntc_thermistor): Fix sparse warnings hwmon: (adt7410) Add device table entry for the adt7420 hwmon: (adt7410) Use I2C_ADDRS helper macro hwmon: (adt7410) Use the SIMPLE_DEV_PM_OPS helper macro hwmon: (adt7410) Let suspend/resume depend on CONFIG_PM_SLEEP hwmon: (adt7410) Clear unwanted bits in the config register hwmon: (jc42) Add support for MCP98244 hwmon: (pmbus) Clean up for code size reduction hwmon: (pmbus/max34440) Add support for MAX34460 and MAX34461 hwmon: (pmbus) Add support for word status register hwmon: (pmbus/zl6100) Add support for VMON/VDRV hwmon: (pmbus) Add function to clear sensor cache hwmon: (pmbus) Add support for additional voltage sensor hwmon: (pmbus) Use krealloc to allocate attribute memory hwmon: (pmbus) Simplify memory allocation for sensor attributes hwmon: (pmbus) Improve boolean handling hwmon: (pmbus) Simplify memory allocation for labels and booleans hwmon: (pmbus) Use dev variable to represent client->dev hwmon: (pmbus) Fix 'Macros with multiple statements' checkpatch error hwmon: (pmbus) Drop unnecessary error messages in probe error path ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl由 Linus Torvalds 提交于
Pull pinctrl changes from Linus Walleij: "These are the main pinctrl changes for the v3.9 merge window. The most interesting change by far is how the device core grabs pinctrl default handles avoiding the need to stick boilerplate into driver consumers. - Grabbing of default pinctrl handles from the device core. These are the hunks hitting drivers/base. All is ACKed by Greg, after a long discussion about different alternatives. - Some stuff also touches the MFD and ARM SoC trees, this has been coordinated and ACKed. - New drivers for: - The Tegra 114 sub-SoC - Allwinner sunxi - New ABx500 driver and sub-SoC drivers for AB8500, AB8505, AB9540 and AB8540. - Make it possible for hogged pins to enter a sleep mode, and make it possible for drivers to control that mode. - Various clean-up, extensions and device tree support to various pin controllers." * tag 'pinctrl-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (68 commits) pinctrl: tegra: add clfvs function to Tegra114 support pinctrl: generic: rename input schmitt disable pinctrl/pinconfig: add debug interface pinctrl: samsung: remove duplicated line ARM: ux500: use real AB8500 IRQ numbers instead of virtual ones ARM: ux500: remove irq_base property from platform_data pinctrl/abx500: use direct IRQ defines pinctrl/abx500: replace IRQ offsets with table read-in values pinctrl/abx500: move IRQ handling to ab8500-core pinctrl: exynos5440: remove erroneous __init pinctrl/abx500: adjust offset for get_mode() pinctrl/abx500: add Device Tree support pinctrl/abx500: align GPIO cluster boundaries pinctrl/abx500: prevent error path from corrupting returning error pinctrl: sunxi: add of_xlate function pinctrl/lantiq: fix pin number in ltq_pmx_gpio_request_enable pinctrl/lantiq: add functionality to falcon_pinconf_dbg_show pinctrl/lantiq: fix pinconfig parameters pinctrl/lantiq: one of the boot leds was defined incorrectly pinctrl/lantiq: only probe available pad controllers ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator由 Linus Torvalds 提交于
Pull regulator updates from Mark Brown: "A fairly quiet release for the regulator API, the bulk of the changes being lots of small cleanups and API updates contributed by Axel Lin with just a small set of larger changes: - New driver for LP8755 - DT support for S5M8767, TPS51632, TPS6507x and TPS65090 - Support for writing a "commit changes" bit in the regmap helper functions." * tag 'regulator-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (60 commits) regulator: Fix memory garbage dev_err printout. regulator: max77686: Reuse rdev_get_id() function. regulator: tps51632: Use regulator_[get|set]_voltage_sel_regmap regulator: as3711: Fix checking if no platform initialization data regulator: s5m8767: Prevent possible NULL pointer dereference regulator: s5m8767: Fix dev argument for devm_kzalloc and of_get_regulator_init_data regulator: core: Optimize _regulator_do_set_voltage if voltage does not change regulator: max8998: Let regulator core handle the case selector == old_selector regulator: s5m8767: Use of_get_child_count() regulator: anatop: improve precision of delay time regulator: show state for GPIO-controlled regulators regulator: s5m8767: Fix build in non-DT case regulator: add device tree support for s5m8767 regulator: palmas: Remove a redundant setting for warm_reset regulator: mc13xxx: Use of_get_child_count() regulator: max8997: Use of_get_child_count() regulator: tps65090: Fix using wrong dev argument for calling of_regulator_match regulators: anatop: add set_voltage_time_sel interface regulator: Add missing of_node_put() regulator: tps6507x: Fix using wrong dev argument for calling of_regulator_match ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap由 Linus Torvalds 提交于
Pull regmap updates from Mark Brown: "Several nice new features and performance improvements here, especially the first: - Support for using the cache infrastructure without the physical I/O, allowing devices which don't fit the physical model regmap has to take advantage of the cache infrastructure, contributed by Andrey Smirnov. - Several small improvements to the support for wake capable IRQs. - Support for asynchronous I/O, allowing us to come much closer to saturating fast buses like SPI. - Support for simple array caches, giving higher performance for use with MMIO devices. - Restoration of the use of bulk reads for handling interrupts, giving a performance improvement. - Support for 24 bit register addresses. - More performance improvements for debugfs." * tag 'regmap-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (24 commits) regmap: mmio: add register clock support regmap: debugfs: Factor out debugfs_tot_len calc into a function regmap: debugfs: Optimize seeking within blocks of registers regmap: debugfs: Add a `max_reg' member in struct regmap_debugfs_off_cache regmap: debugfs: Fix reading in register field units regmap: spi: Handle allocation failures gracefully regmap: Export regmap_async_complete() regmap: Export regmap_async_complete_cb regmap: include linux/sched.h to fix build regmap: spi: Support asynchronous I/O for SPI regmap: Add asynchronous I/O support regmap: Add "no-bus" option for regmap API regmap: regmap: avoid spurious warning in regmap_read_debugfs regmap: Add provisions to have user-defined write operation regmap: Add provisions to have user-defined read operation regmap: Add support for 24 bit wide register addresses mfd: wm5110: Mark wakes as inverted mfd: wm5102: Mark wakes as inverted regmap: irq: Support wake IRQ mask inversion regmap: irq: Fix sync of wake statuses to hardware ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cpuset changes from Tejun Heo: - Synchornization has seen a lot of changes with focus on decoupling cpuset synchronization from cgroup internal locking. After this change, there only remain a couple of mostly trivial dependencies on cgroup_lock outside cgroup core proper. cgroup_lock is scheduled to be unexported in this devel cycle. This will finally remove the fragile locking order around cgroup (cgroup locking wants to / should be one of the outermost but yet has been acquired from deep inside individual controllers). - At this point, Li is most knowlegeable with cpuset and taking over the maintainership of cpuset. * 'for-3.9-cpuset' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: drop spurious retval assignment in proc_cpuset_show() cpuset: fix RCU lockdep splat cpuset: update MAINTAINERS cpuset: remove cpuset->parent cpuset: replace cpuset->stack_list with cpuset_for_each_descendant_pre() cpuset: replace cgroup_mutex locking with cpuset internal locking cpuset: schedule hotplug propagation from cpuset_attach() if the cpuset is empty cpuset: pin down cpus and mems while a task is being attached cpuset: make CPU / memory hotplug propagation asynchronous cpuset: drop async_rebuild_sched_domains() cpuset: don't nest cgroup_mutex inside get_online_cpus() cpuset: reorganize CPU / memory hotplug handling cpuset: cleanup cpuset[_can]_attach() cpuset: introduce cpuset_for_each_child() cpuset: introduce CS_ONLINE cpuset: introduce ->css_on/offline() cpuset: remove fast exit path from remove_tasks_in_empty_cpuset() cpuset: remove unused cpuset_unlock()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup changes from Tejun Heo: "Nothing too drastic. - Removal of synchronize_rcu() from userland visible paths. - Various fixes and cleanups from Li. - cgroup_rightmost_descendant() added which will be used by cpuset changes (it will be a separate pull request)." * 'for-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fail if monitored file and event_control are in different cgroup cgroup: fix cgroup_rmdir() vs close(eventfd) race cpuset: fix cpuset_print_task_mems_allowed() vs rename() race cgroup: fix exit() vs rmdir() race cgroup: remove bogus comments in cgroup_diput() cgroup: remove synchronize_rcu() from cgroup_diput() cgroup: remove duplicate RCU free on struct cgroup sched: remove redundant NULL cgroup check in task_group_path() sched: split out css_online/css_offline from tg creation/destruction cgroup: initialize cgrp->dentry before css_alloc() cgroup: remove a NULL check in cgroup_exit() cgroup: fix bogus kernel warnings when cgroup_create() failed cgroup: remove synchronize_rcu() from rebind_subsystems() cgroup: remove synchronize_rcu() from cgroup_attach_{task|proc}() cgroup: use new hashtable implementation cgroups: fix cgroup_event_listener error handling cgroups: move cgroup_event_listener.c to tools/cgroup cgroup: implement cgroup_rightmost_descendant() cgroup: remove unused dummy cgroup_fork_callbacks()
-
- 20 2月, 2013 13 次提交
-
-
由 Russell King 提交于
Conflicts: arch/arm/include/asm/memory.h
-
由 Russell King 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq由 Linus Torvalds 提交于
Pull async changes from Tejun Heo: "These are followups for the earlier deadlock issue involving async ending up waiting for itself through block requesting module[1]. The following changes are made by these commits. - Instead of requesting default elevator on each request_queue init, block now requests it once early during boot. - Kmod triggers warning if invoked from an async worker. - Async synchronization implementation has been reimplemented. It's a lot simpler now." * 'for-3.9-async' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: async: initialise list heads to fix crash async: replace list of active domains with global list of pending items async: keep pending tasks on async_domain and remove async_pending async: use ULLONG_MAX for infinity cookie value async: bring sanity to the use of words domain and running async, kmod: warn on synchronous request_module() from async workers block: don't request module during elevator init init, block: try to load default elevator module early during boot
-
由 Dmitry Torokhov 提交于
Prepare first set of updates for 3.9 merge window.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq由 Linus Torvalds 提交于
Pull workqueue changes from Tejun Heo: "A lot of reorganization is going on mostly to prepare for worker pools with custom attributes so that workqueue can replace custom pool implementations in places including writeback and btrfs and make CPU assignment in crypto more flexible. workqueue evolved from purely per-cpu design and implementation, so there are a lot of assumptions regarding being bound to CPUs and even unbound workqueues are implemented as an extension of the model - workqueues running on the special unbound CPU. Bulk of changes this round are about promoting worker_pools as the top level abstraction replacing global_cwq (global cpu workqueue). At this point, I'm fairly confident about getting custom worker pools working pretty soon and ready for the next merge window. Lai's patches are replacing the convoluted mb() dancing workqueue has been doing with much simpler mechanism which only depends on assignment atomicity of long. For details, please read the commit message of 0b3dae68 ("workqueue: simplify is-work-item-queued-here test"). While the change ends up adding one pointer to struct delayed_work, the inflation in percentage is less than five percent and it decouples delayed_work logic a lot more cleaner from usual work handling, removes the unusual memory barrier dancing, and allows for further simplification, so I think the trade-off is acceptable. There will be two more workqueue related pull requests and there are some shared commits among them. I'll write further pull requests assuming this pull request is pulled first." * 'for-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (37 commits) workqueue: un-GPL function delayed_work_timer_fn() workqueue: rename cpu_workqueue to pool_workqueue workqueue: reimplement is_chained_work() using current_wq_worker() workqueue: fix is_chained_work() regression workqueue: pick cwq instead of pool in __queue_work() workqueue: make get_work_pool_id() cheaper workqueue: move nr_running into worker_pool workqueue: cosmetic update in try_to_grab_pending() workqueue: simplify is-work-item-queued-here test workqueue: make work->data point to pool after try_to_grab_pending() workqueue: add delayed_work->wq to simplify reentrancy handling workqueue: make work_busy() test WORK_STRUCT_PENDING first workqueue: replace WORK_CPU_NONE/LAST with WORK_CPU_END workqueue: post global_cwq removal cleanups workqueue: rename nr_running variables workqueue: remove global_cwq workqueue: remove worker_pool->gcwq workqueue: replace for_each_worker_pool() with for_each_std_worker_pool() workqueue: make freezing/thawing per-pool workqueue: make hotplug processing per-pool ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq由 Linus Torvalds 提交于
Pull workqueue [delayed_]work_pending() cleanups from Tejun Heo: "This is part of on-going cleanups to remove / minimize usages of workqueue interfaces which are deprecated and/or misleading. This round drops a number of usages of [delayed_]work_pending(), which are dangerous as they lack any form of synchronization and thus often lead to buggy / unnecessary code. There are a couple legitimate use cases in kernel. Hopefully, they can be converted and [delayed_]work_pending() can be removed completely. Even if not, removing most of misuses should make it more difficult to find examples of misuses and thus slow down growth of them. These changes are independent from other workqueue changes." * 'for-3.9-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: wimax/i2400m: fix i2400m->wake_tx_skb handling kprobes: fix wait_for_kprobe_optimizer() ipw2x00: simplify scan_event handling video/exynos: don't use [delayed_]work_pending() tty/max3100: don't use [delayed_]work_pending() x86/mce: don't use [delayed_]work_pending() rfkill: don't use [delayed_]work_pending() wl1251: don't use [delayed_]work_pending() thinkpad_acpi: don't use [delayed_]work_pending() mwifiex: don't use [delayed_]work_pending() sja1000: don't use [delayed_]work_pending()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 UV3 support update from Ingo Molnar: "Support for the SGI Ultraviolet System 3 (UV3) platform - the upcoming third major iteration and upscaling of the SGI UV supercomputing platform." * 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, uv, uv3: Trim MMR register definitions after code changes for SGI UV3 x86, uv, uv3: Check current gru hub support for SGI UV3 x86, uv, uv3: Update Time Support for SGI UV3 x86, uv, uv3: Update x2apic Support for SGI UV3 x86, uv, uv3: Update Hub Info for SGI UV3 x86, uv, uv3: Update ACPI Check to include SGI UV3 x86, uv, uv3: Update MMR register definitions for SGI Ultraviolet System 3 (UV3)
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 platform changes from Ingo Molnar: - Support for the Technologic Systems TS-5500 platform, by Vivien Didelot - Improved NUMA support on AMD systems: Add support for federated systems where multiple memory controllers can exist and see each other over multiple PCI domains. This basically means that AMD node ids can be more than 8 now and the code handling this is taught to incorporate PCI domain into those IDs. - Support for the Goldfish virtual Android emulator, by Jun Nakajima, Intel, Google, et al. - Misc fixlets. * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Add TS-5500 platform support x86/srat: Simplify memory affinity init error handling x86/apb/timer: Remove unnecessary "if" goldfish: platform device for x86 amd64_edac: Fix type usage in NB IDs and memory ranges amd64_edac: Fix PCI function lookup x86, AMD, NB: Use u16 for northbridge IDs in amd_get_nb_id x86, AMD, NB: Add multi-domain support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86/hyperv changes from Ingo Molnar: "The biggest change is support for Windows 8's improved hypervisor interrupt model on the Linux Hyper-V guest subsystem code side. Smallish fixes otherwise." * 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, hyperv: HYPERV depends on X86_LOCAL_APIC X86: Handle Hyper-V vmbus interrupts as special hypervisor interrupts X86: Add a check to catch Xen emulation of Hyper-V x86: Hyper-V: register clocksource only if its advertised
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86/debug changes from Ingo Molnar: "Two init annotations and a built-in memtest speedup" * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/memtest: Shorten time for tests x86: Convert a few mistaken __cpuinit annotations to __init x86/EFI: Properly init-annotate BGRT code
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next由 David S. Miller 提交于
John W. Linville says: ==================== One last batch of stragglers intended for 3.9... For the iwlwifi pull, Johannes says: "I hadn't expected to ask you to pull iwlwifi-next again, but I have a number of fixes most of which I'd also send in after rc1, so here it is. The first commit is a merge error between mac80211-next and iwlwifi-next; in addition I have fixes for P2P scanning and MVM driver MAC (virtual interface) management from Ilan, a CT-kill (critical temperature) fix from Eytan, and myself fixed three different little but annoying bugs in the MVM driver. The only ones I might not send for -rc1 are Emmanuel's debug patch, but OTOH it should help greatly if there are any issues, and my own time event debugging patch that I used to find the race condition but we decided to keep it for the future." For the mac80211 pull, Johannes says: "Like iwlwifi-next, this would almost be suitable for rc1. I have a fix for station management on non-TDLS drivers, a CAB queue crash fix for mesh, a fix for an annoying (but harmless) warning, a tracing fix and a documentation fix. Other than that, only a few mesh cleanups." Along with that is a fix for memory corruption in rtlwifi, an orinoco_usb fix to avoid allocating a DMA buffer on the stack, an a hostap fix to return -ENOMEM instead of -1 after a memory allocation failure. The remaining bits implement 802.11ac support for the mwifiex driver -- I think that is still worth getting into 3.9. Please let me know if there are problems! ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
commit 68c33163 (v4 GRE: Add TCP segmentation offload for GRE) introduced a bug in error path. dst is attached to skb, so will be released when skb is freed. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Pravin B Shelar <pshelar@nicira.com> Acked-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 cleanup patches from Ingo Molnar: "Misc smaller cleanups" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: ptrace.c only needs export.h and not the full module.h x86, apb_timer: remove unused variable percpu_timer um: don't compare a pointer to 0 arch/x86/platform/uv: use ARRAY_SIZE where possible
-