Switch the FILS AEAD code to use a cmac(aes) shash instantiated by the
crypto API rather than reusing the open coded implementation in
aes_cmac_vector(). This makes the code more understandable, and allows
platforms to implement cmac(aes) in a more secure (*) and efficient way
than is typically possible when using the AES cipher directly.

So replace the crypto_cipher by a crypto_shash, and update the aes_s2v()
routine to call the shash interface directly.

* In particular, the generic table based AES implementation is sensitive
  to known-plaintext timing attacks on the key, to which AES based MAC
  algorithms are especially vulnerable, given that their plaintext is not
  usually secret. Time invariant alternatives are available (e.g., based
  on SIMD algorithms), but may incur a setup cost that is prohibitive when
  operating on a single block at a time, which is why they don't usually
  expose the cipher API.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

This fixes the checkpatch.pl warnings:
* Macros should not use a trailing semicolon.
* Spaces required around that '='.
* Symbolic permissions 'S_IRUGO' are not preferred.
Signed-off-by: NDmitriy Pichugin <smokeman85@gmail.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Somehow these files were never present or lost, but the code
is there and they seem somewhat useful, so add them back.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The spec writes cipher/AKM suites as something like 00-0F-AC:9,
but the part after the colon isn't hex, it's decimal, so that
we've already had a few mistakes (in other code, or unmerged
patches) to e.g. write 0x000FAC10 instead of 0x000FAC0A.

Use a macro to avoid that problem.
Reviewed-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

cleanup patch to make use of ieee80211_ac_from_tid() to retrieve ac from
ieee802_1d_to_ac[]
Signed-off-by: NAmadeusz Sławiński <amadeusz.slawinski@tieto.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The header file has grown a lot of #define's etc, but
they are nicer as enums, so rewrite the file from the
documentation as such.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

There are no users of this ("vrfkill") in the tree, so it's just
dead code - remove it.

This also isn't really how rfkill is supposed to be used - it's
intended as a signalling mechanism to/from the device, which the
driver (and partially cfg80211) will handle - having a separate
rfkill instance for a regulator is confusing, the driver should
use the regulator instead to turn off the device when requested.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

For a few restructured text warnings in mac80211, making the
documentation warning-free (for now).

In order to not add trailing whitespace, but also not introduce
too much noise into this change, move just the affected docs
into inline comments.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The new restructured text parser complains about the formatting,
and really this should be a definition list.

In order to fix this without introducing trailing whitespace,
convert to the inline kernel-doc format.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

We need to initialize im_node to NULL, otherwise in case of error path
it gets passed to kfree() as uninitialized pointer.

Fixes: b95a5c4d ("bpf: add a longest prefix match trie map implementation")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Mack says:

====================
bpf: add longest prefix match map

This patch set adds a longest prefix match algorithm that can be used
to match IP addresses to a stored set of ranges. It is exposed as a
bpf map type.

Internally, data is stored in an unbalanced tree of nodes that has a
maximum height of n, where n is the prefixlen the trie was created
with.

Note that this has nothing to do with fib or fib6 and is in no way meant
to replace or share code with it. It's rather a much simpler
implementation that is specifically written with bpf maps in mind.

Patch 1/2 adds the implementation, 2/2 an extensive test suite and 3/3
has benchmarking code for the new trie type.

Feedback is much appreciated.

Changelog:

v3 -> v4:
	* David added a 3rd patch that augments map_perf_test for
	  LPM trie benchmarks
	* Limit allocation of maps of this new type to CAP_SYS_ADMIN
	  for now, as requested by Alexei
	* Add a stub .map_delete_elem so the core does not stumble
	  over a NULL pointer when the syscall is invoked
	* Tests for non-power-of-2 prefix lengths were added
	* More comment style fixes

v2 -> v3:
	* Store both the key match data and the caller provided
	  value in the same byte array attached to a node. This
	  avoids double allocations
	* Bring back node->flags to distinguish between 'real'
	  and intermediate nodes
	* Fix comment style and some typos

v1 -> v2:
	* Turn spin lock into raw spinlock
	* Lock with irqsave options during trie_update_elem()
	* Return -ENOMEM properly from trie_alloc()
	* Force attr->flags == BPF_F_NO_PREALLOC during creation
	* Set trie->map.pages after creation to account for map memory
	* Allow arbitrary value sizes
	* Removed node->flags and denode intermediate nodes through
	  node->value == NULL instead

rfc -> v1:
	* Add __rcu pointer annotations to make sparse happy
	* Fold _lpm_trie_find_target_node() into its only caller
	* Fix some minor documentation issues
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Extend the map_perf_test_{user,kern}.c infrastructure to stress test
lpm-trie lookups. We hook into the kprobe on sys_gettid() and measure
the latency depending on trie size and lookup count.

On my Intel Haswell i7-6400U, a single gettid() syscall with an empty
bpf program takes roughly 6.5us on my system. Lookups in empty tries
take ~1.8us on first try, ~0.9us on retries. Lookups in tries with 8192
entries take ~7.1us (on the first _and_ any subsequent try).
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Reviewed-by: NDaniel Mack <daniel@zonque.org>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The first part of this program runs randomized tests against the
lpm-bpf-map. It implements a "Trivial Longest Prefix Match" (tlpm)
based on simple, linear, single linked lists. The implementation
should be pretty straightforward.

Based on tlpm, this inserts randomized data into bpf-lpm-maps and
verifies the trie-based bpf-map implementation behaves the same way
as tlpm.

The second part uses 'real world' IPv4 and IPv6 addresses and tests
the trie with those.
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDaniel Mack <daniel@zonque.org>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This trie implements a longest prefix match algorithm that can be used
to match IP addresses to a stored set of ranges.

Internally, data is stored in an unbalanced trie of nodes that has a
maximum height of n, where n is the prefixlen the trie was created
with.

Tries may be created with prefix lengths that are multiples of 8, in
the range from 8 to 2048. The key used for lookup and update operations
is a struct bpf_lpm_trie_key, and the value is a uint64_t.

The code carries more information about the internal implementation.
Signed-off-by: NDaniel Mack <daniel@zonque.org>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Declare net_device_ops structure as const as it is only stored in
the netdev_ops field of a net_device structure. This field is of type
const, so net_device_ops structures having same properties can be made
const too.
Done using Coccinelle:

@r1 disable optional_qualifier@
identifier i;
position p;
@@
static struct net_device_ops i@p={...};

@ok1@
identifier r1.i;
position p;
struct net_device ndev;
@@
ndev.netdev_ops=&i@p

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct net_device_ops i;

File size before:
   text	   data	    bss	    dec	    hex	filename
   6201	    744	      0	   6945	   1b21 ethernet/xilinx/xilinx_emaclite.o

File size after:
   text	   data	    bss	    dec	    hex	filename
   6745	    192	      0	   6937	   1b19 ethernet/xilinx/xilinx_emaclite.o
Signed-off-by: NBhumika Goyal <bhumirks@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Declare net_device_ops structure as const as it is only stored in
the netdev_ops field of a net_device structure. This field is of type
const, so net_device_ops structures having same properties can be made
const too.
Done using Coccinelle:

@r1 disable optional_qualifier@
identifier i;
position p;
@@
static struct net_device_ops i@p={...};

@ok1@
identifier r1.i;
position p;
struct net_device ndev;
@@
ndev.netdev_ops=&i@p

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct net_device_ops i;

File size before:
   text	   data	    bss	    dec	    hex	filename
   4821	    744	      0	   5565	   15bd ethernet/moxa/moxart_ether.o

File size after:
   text	   data	    bss	    dec	    hex	filename
   5373	    192	      0	   5565	   15bd ethernet/moxa/moxart_ether.o
Signed-off-by: NBhumika Goyal <bhumirks@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During reset, functions emac_mac_down() and emac_mac_up() are called,
so we don't want to free and claim the IRQ unnecessarily.  Move those
operations to open/close.
Signed-off-by: NTimur Tabi <timur@codeaurora.org>
Reviewed-by: NLino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The EMAC has an internal PHY that is often called the "SGMII".  This
SGMII is also connected to an external PHY, which is managed by phylib.
These dual PHYs often cause confusion.  In this case, the data structure
for managing the SGMII was mis-named and located in the wrong header file.

Structure emac_phy is renamed to emac_sgmii to clearly indicate it applies
to the internal PHY only.  It also also moved from emac_phy.h (which
supports the external PHY) to emac_sgmii.h (where it belongs).

To keep the changes minimal, only the structure name is changed, not
the names of any variables of that type.
Signed-off-by: NTimur Tabi <timur@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 4cace675 ("bnx2x: Alloc 4k fragment for each rx ring buffer
element") added extra put_page() and get_page() calls on arches where
PAGE_SIZE=4K like x86

Reorder things to avoid this overhead.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Cc: Yuval Mintz <Yuval.Mintz@cavium.com>
Cc: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: dsa: bcm_sf2: Add support for BCM7278

This patch series adds support for the Broadcom BCM7278 integrated switch
which is a successor of the BCM7445 switch. We have a little bit of
register shuffling going on, which is why most of the functional changes
are to deal with that.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement the HW design team recommended workaround in for 7278. Since
the GPHY now returns its revision information in MII_PHYS_ID[23] we need
to check whether the revision provided in flags is 0 or not.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for the BCM7278 28nm process Gigabit Ethernet PHY.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Parse the "brcm,use-bcm-hdr" boolean property during ports
identification to fill a bitmask of ports that should have Broadcom tags
enabled. This is needed in some configurations where per-packet metadata
can be exchanged using Broadcom tags between the switch and an on-chip
acceleration device.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preparation for enabling Broadcom tags on different ports based on
configuration information, dedicate a function that is responsible for
enabling Broadcom tags for a given port and update the IMP port setup to
call it.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for the integrated switch found on BCM7278:

- core_reg_align is set to 1, to force a translation into the target
  address space which is 8 bytes aligned
- an alternate SWITCH_REG layout is provided since registers are largely
  bit/masks compatible but have different offsets
- conditional for all CORE_STS_OVERRIDE_{IMP,GMII_P} since those got
  moved way out of the traditional register space
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preparation for supporting a new device with a slightly different
register layout, affecting the SWITCH_REG and SWITCH_CORE address
spaces, perform a few preparatory steps:

- allow matching the compatible string against a data description
- convert the SWITCH_REG register accesses into an indirection table
- prepare for supporting a SWITCH_CORE register alignment requirement
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no point inlining the 32-bit direct register read/write part,
just infer it from the existing macro. This will make it easier to
centralize the address rewriting that we are going to introduce later
on.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: systemport: Add support for SYSTEMPORT lite

This patch series adds support for SYSTEMPORT Lite which is an evolution
of the existing SYSTEMPORT adapter.

The two generations are largely identical as far as the transmit/receive
path are concerned, and there were just a few control path changes here
and there.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add supporf for the SYSTEMPORT Lite Ethernet controller, this piece of hardware
is largely based on the full-blown SYSTEMPORT and differs in the following:

- no full-blown UniMAC, instead we have the MagicPacket matching from UniMAC at
  same offset, and a GMII Interface Block (GIB) for the MAC-level stuff, since
  we are always interfaced to an Ethernet switch which is fully Ethernet compliant
  shortcuts could be made

- 16 transmit queues, whose interrupts are moved into the first Level-2 interrupt
  controller bank

- slight TDMA offset change (a register was inserted after TDMA_STATUS, *sigh*)

- 256 RX descriptors (512 words) and 256 TX descriptors (not visible)

As a consequence of these two things, update the code paths accordingly to
differentiate the full-blown from the light version.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preparation for adding SYSTEMPORT Lite, which has twice as less transmit
queues than SYSTEMPORT make sure we do allocate TX rings based on the
systemport,txq property to get an appropriate memory footprint.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since we allocate per cpu storage, let's also use NUMA hints.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NDavid Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes the LS mask when setting EEE timer.
LS field is 10 bits long and not 11 as currently.
Signed-off-by: NJoao Pinto <jpinto@synopsys.com>
Reported-By: NRayagond Kokatanur <rayagond@vayavyalabs.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Andrew Lunn says:

====================
net: dsa: Move temperature sensor code into PHY.

Marvell Ethernet switches contain a temperature sensor. There appears
to be one sensor, which is shared by each of the internal PHYs. Each
PHY has independent registers to read this sensor, and to set a limit
for when an alarm should be raised.

Some Marvell discrete PHY also have the same sensor and registers.
Moving the HWMON code from DSA into the PHY makes the sensor available
in discrete PHYs, and removes the layering violation, the switch
driver poking around in PHY registers.

While moving the code into the PHY driver, it has been re-written to
use the new HWMON APIs.

v2:

Better Cover note explaining one sensor, but multiple independent
registers

Simply error checking.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Only the Marvell mv88e6xxx DSA driver made use of the HWMON support in
DSA. The temperature sensor registers are actually in the embedded
PHYs, and the PHY driver now supports it. So remove all HWMON support
from DSA and drivers.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some Marvell PHYs have an inbuilt temperature sensor. Add hwmon
support for this sensor.

There are two different variants. The simpler, older chips have a 5
degree accuracy. The newer devices have 1 degree accuracy.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When comparing two sockets we need to use inet6_rcv_saddr so we get a NULL
sk_v6_rcv_saddr if the socket isn't AF_INET6, otherwise our comparison function
can be wrong.

Fixes: 637bc8bb ("inet: reset tb->fastreuseport when adding a reuseport sk")
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5 and mlx5e updates 2017-01-19

This series includes some updates for mlx5 core and mlx5e netdevice driver.

From Leon, a small fix that remove an unnecessary print.

From Eli Cohen, a fix to the FW version printout in case of internal error.

From Eugenia Emantayev, two patches, the 1st adds mlx5 1pps (pulse per
second) mlx5 infrastructure support and the 2nd adds the necessary bits
for mlx5e ptp logic and structures.

From Mohamad, add support for s-tagged packet receive when in promiscuous
mode.

Form Gal Pressman, MCAM (Management capabilities mask register) and PCAM
(Ports capabilities mask register) registers infrastructure, those
registers are needed in order to query the different statistics registers
support in FW, in order for the driver to enable/disable query and
reporting them back to user.  On top of this infrastructure we've exposed
new set of statistics groups:
   - MPCNT: Physical layer statistical counters (For symbol errors)
   - PPCNT: PCIe performance counters

In addition to the statistics capabilities series we've moved the mlx5 HCA
capabilities fields to a dedicated struct under the driver private data.

At the end a small patch to update & query statistics in the most desired
order.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ivan Khoronzhuk says:

====================
net: ethernet: ti: cpsw: correct common res usage

This series is intended to remove unneeded redundancies connected with
common resource usage function.

Since v1:
- changed name to cpsw_get_usage_count()
- added comments to open/closw for cpsw_get_usage_count()
- added patch:
  net: ethernet: ti: cpsw: clarify ethtool ops changing num of descs

Based on net-next/master
====================
Reviewed-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>