- 19 8月, 2016 12 次提交
-
-
由 Chao Yu 提交于
Only if two input files are regular files, we allow copying data in range of them, otherwise, deny it. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
This reverts commit a2ee0a30. When testing with generic/032 of xfstest suit, failure message will be reported as below: generic/032 8s ... [failed, exit status 1] - output mismatch (see results/generic/032.out.bad) --- tests/generic/032.out 2015-01-11 16:52:27.643681072 +0800 +++ results/generic/032.out.bad 2016-08-06 13:44:43.861330500 +0800 @@ -1,5 +1,5 @@ QA output created by 032 -100 iterations -0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd -* -0100000 +1: [768..775]: unwritten +Unwritten extents found! ... (Run 'diff -u tests/generic/032.out results/generic/032.out.bad' to see the entire diff) Ran: generic/032 Failures: generic/032 Failed 1 of 1 tests In write_end(), we should update i_size of inode before unlock page, otherwise, we will lose newly updated data in following race condition. Thread A Thread B - write_end - unlock page - writepages - lock_page - writepage if page is out-of-range of file size, we will skip writting the page. - update i_size Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
LKP reported -36.3% regression of fsmark.files_per_sec due to this patch. I've confirmed that fxmark [1] has also slight regression for DWAL. [1] https://github.com/sslab-gatech/fxmark This reverts commit ec795418.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "An initrd microcode loading fix, and an SMP bootup topology setup fix to resolve crashes on SGI/UV systems if the BIOS is configured in a certain way" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/smp: Fix __max_logical_packages value setup x86/microcode/AMD: Fix initrd loading with CONFIG_RANDOMIZE_MEMORY=y
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fixes from Ingo Molnar: "Three clocksource driver fixes" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/mips-gic-timer: Make gic_clocksource_of_init() return int clocksource/drivers/kona: Fix get_counter() error handling clocksource/drivers/time-armada-370-xp: Fix the clock reference
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fixes from Ingo Molnar: "Two cputime fixes - hopefully the last ones" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cputime: Resync steal time when guest & host lose sync sched/cputime: Fix NO_HZ_FULL getrusage() monotonicity regression
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, but also start/stop filter related fixes, a perf event read() fix, a fix uncovered by fuzzing, and an uprobes leak fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Check return value of the perf_event_read() IPI perf/core: Enable mapping of the stop filters perf/core: Update filters only on executable mmap perf/core: Fix file name handling for start/stop filters perf/core: Fix event_function_local() uprobes: Fix the memcg accounting perf intel-pt: Fix occasional decoding errors when tracing system-wide tools: Sync kvm related header files for arm64 and s390 perf probe: Release resources on error when handling exit paths perf probe: Check for dup and fdopen failures perf symbols: Fix annotation of objects with debuginfo files perf script: Don't disable use_callchain if input is pipe perf script: Show proper message when failed list scripts perf jitdump: Add the right header to get the major()/minor() definitions perf ppc64le: Fix build failure when libelf is not present perf tools mem: Fix -t store option for record command perf intel-pt: Fix ip compression
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull locking fixes from Ingo Molnar: "Two lockless_dereference() related fixes" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/barriers: Suppress sparse warnings in lockless_dereference() Revert "drm/fb-helper: Reduce READ_ONCE(master) to lockless_dereference"
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Catalin Marinas: - Avoid a literal load with the MMU off on the CPU resume path (potential inconsistency between cache and RAM) - Build error with CONFIG_ACPI=n fixed - Compiler warning in the arch/arm64/mm/dump.c code fixed * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Fix shift warning in arch/arm64/mm/dump.c arm64: kernel: avoid literal load of virtual address with MMU off arm64: Fix NUMA build error when !CONFIG_ACPI
-
git://git.armlinux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "Only three fixes this time: - Emil found an overflow problem with the memory layout sanity check. - Ard Biesheuvel noticed that late-allocated page tables (for EFI) weren't being properly constructed. - Guenter Roeck reported a problem found on qemu caused by the recent addr_limit changes" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: fix address limit restoration for undefined instructions ARM: 8591/1: mm: use fully constructed struct pages for EFI pgd allocations ARM: 8590/1: sanity_check_meminfo(): avoid overflow on vmalloc_limit
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management fixes from Rafael Wysocki: "More hibernation-related material: one fix for a recent regression in the core, one small cleanup of the x86-64 resume code and a documentation update. Specifics: - Fix a hibernate core regression resulting from uncovering a latent bug in its implementation of memory bitmaps by a recent commit (James Morse). - Use __pa() to compute a physical address in the x86-64 code finalizing resume from hibernation (Rafael Wysocki). - Update power management documentation related to system sleep states to remove outdated information from it and to add a description of a recently introduced hibernation debug feature to it (Rafael Wysocki)" * tag 'pm-4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / hibernate: Fix rtree_next_node() to avoid walking off list ends x86/power/64: Use __pa() for physical address computation PM / sleep: Update some system sleep documentation
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Pretty quiet so far: - a few amdgpu/radeon fixup for pcie pm changes - a couple of amdgpu fixes - some build fixes - printk fix" * tag 'drm-fixes-for-4.8-rc3' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: Change GART offset to 64-bit drm/mediatek: add ARM_SMCCC dependency drm/mediatek: add CONFIG_OF dependency drm/mediatek: add COMMON_CLK dependency drm/amdgpu: Fix memory trashing if UVD ring test fails drm/amdgpu: fix vm init error path drm/amdkfd: print doorbell offset as a hex value Revert "drm/radeon: work around lack of upstream ACPI support for D3cold" Revert "drm/amdgpu: work around lack of upstream ACPI support for D3cold"
-
- 18 8月, 2016 28 次提交
-
-
由 Johannes Berg 提交于
After Peter's commit: 331b6d8c ("locking/barriers: Validate lockless_dereference() is used on a pointer type") ... we get a lot of sparse warnings (one for every rcu_dereference, and more) since the expression here is assigning to the wrong address space. Instead of validating that 'p' is a pointer this way, instead make it fail compilation when it's not by using sizeof(*(p)). This will not cause any sparse warnings (tested, likely since the address space is irrelevant for sizeof), and will fail compilation when 'p' isn't a pointer type. Tested-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 331b6d8c ("locking/barriers: Validate lockless_dereference() is used on a pointer type") Link: http://lkml.kernel.org/r/1470909022-687-2-git-send-email-johannes@sipsolutions.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Johannes Berg 提交于
This reverts commit: fa7d81bb ("drm/fb-helper: Reduce READ_ONCE(master) to lockless_dereference") As Peter explained: [...] lockless_dereference() is _stronger_ than READ_ONCE(), not weaker. [...] Also, clue is in the name: 'dereference', you don't actually dereference the pointer here, only load it. My next patch breaks the compile without this revert, because it assumes you want to deference and thus also need the struct type visible (which it isn't here), so revert it. Tested-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1470909022-687-1-git-send-email-johannes@sipsolutions.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Catalin Marinas 提交于
When building with 48-bit VAs and 16K page configuration, it's possible to get the following warning when building the arm64 page table dumping code: arch/arm64/mm/dump.c: In function ‘walk_pud’: arch/arm64/mm/dump.c:274:102: warning: right shift count >= width of type [-Wshift-count-overflow] This is because pud_offset(pgd, 0) performs a shift to the right by 36 while the value 0 has the type 'int' by default, therefore 32-bit. This patch modifies all the p*_offset() uses in arch/arm64/mm/dump.c to use 0UL for the address argument. Acked-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Wanpeng Li 提交于
Commit: 57430218 ("sched/cputime: Count actually elapsed irq & softirq time") ... fixed a bug but also triggered a regression: On an i5 laptop, 4 pCPUs, 4vCPUs for one full dynticks guest, there are four CPU hog processes(for loop) running in the guest, I hot-unplug the pCPUs on host one by one until there is only one left, then observe CPU utilization via 'top' in the guest, it shows: 100% st for cpu0(housekeeping) 75% st for other CPUs (nohz full mode) However, w/o this commit it shows the correct 75% for all four CPUs. When a guest is interrupted for a longer amount of time, missed clock ticks are not redelivered later. Because of that, we should not limit the amount of steal time accounted to the amount of time that the calling functions think have passed. However, the interval returned by account_other_time() is NOT rounded down to the nearest jiffy, while the base interval in get_vtime_delta() it is subtracted from is, so the max cputime limit is required to avoid underflow. This patch fixes the regression by limiting the account_other_time() from get_vtime_delta() to avoid underflow, and lets the other three call sites (in account_other_time() and steal_account_process_time()) account however much steal time the host told us elapsed. Suggested-by: NRik van Riel <riel@redhat.com> Suggested-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com> Reviewed-by: NRik van Riel <riel@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Link: http://lkml.kernel.org/r/1471399546-4069-1-git-send-email-wanpeng.li@hotmail.com [ Improved the changelog. ] Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
Mike reports: Roughly 10% of the time, ltp testcase getrusage04 fails: getrusage04 0 TINFO : Expected timers granularity is 4000 us getrusage04 0 TINFO : Using 1 as multiply factor for max [us]time increment (1000+4000us)! getrusage04 0 TINFO : utime: 0us; stime: 179us getrusage04 0 TINFO : utime: 3751us; stime: 0us getrusage04 1 TFAIL : getrusage04.c:133: stime increased > 5000us: And tracked it down to the case where the task simply doesn't get _any_ [us]time ticks. Update the code to assume all rtime is utime when we lack information, thus ensuring a task that elides the tick gets time accounted. Reported-by: NMike Galbraith <umgwanakikbuti@gmail.com> Tested-by: NMike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Fredrik Markstrom <fredrik.markstrom@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Cc: stable@vger.kernel.org # 4.3+ Fixes: 9d7fb042 ("sched/cputime: Guarantee stime + utime == rtime") Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 David Carrillo-Cisneros 提交于
The call to smp_call_function_single in perf_event_read() may fail if an invalid or not online CPU index is passed. Warn user if such bug is present and return error. Signed-off-by: NDavid Carrillo-Cisneros <davidcc@google.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1471467307-61171-2-git-send-email-davidcc@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Mathieu Poirier 提交于
At this time the perf_addr_filter_needs_mmap() function will _not_ return true on a user space 'stop' filter. But stop filters need exactly the same kind of mapping that range and start filters get. Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Acked-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1468860187-318-4-git-send-email-mathieu.poirier@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Mathieu Poirier 提交于
Function perf_event_mmap() is called by the MM subsystem each time part of a binary is loaded in memory. There can be several mapping for a binary, many times unrelated to the code section. Each time a section of a binary is mapped address filters are updated, event when the map doesn't pertain to the code section. The end result is that filters are configured based on the last map event that was received rather than the last mapping of the code segment. For example if we have an executable 'main' that calls library 'libcstest.so.1.0', and that we want to collect traces on code that is in that library. The perf cmd line for this scenario would be: perf record -e cs_etm// --filter 'filter 0x72c/0x40@/opt/lib/libcstest.so.1.0' --per-thread ./main Resulting in binaries being mapped this way: root@linaro-nano:~# cat /proc/1950/maps 00400000-00401000 r-xp 00000000 08:02 33169 /home/linaro/main 00410000-00411000 r--p 00000000 08:02 33169 /home/linaro/main 00411000-00412000 rw-p 00001000 08:02 33169 /home/linaro/main 7fa2464000-7fa2474000 rw-p 00000000 00:00 0 7fa2474000-7fa25a4000 r-xp 00000000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so 7fa25a4000-7fa25b3000 ---p 00130000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so 7fa25b3000-7fa25b7000 r--p 0012f000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so 7fa25b7000-7fa25b9000 rw-p 00133000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so 7fa25b9000-7fa25bd000 rw-p 00000000 00:00 0 7fa25bd000-7fa25be000 r-xp 00000000 08:02 38308 /opt/lib/libcstest.so.1.0 7fa25be000-7fa25cd000 ---p 00001000 08:02 38308 /opt/lib/libcstest.so.1.0 7fa25cd000-7fa25ce000 r--p 00000000 08:02 38308 /opt/lib/libcstest.so.1.0 7fa25ce000-7fa25cf000 rw-p 00001000 08:02 38308 /opt/lib/libcstest.so.1.0 7fa25cf000-7fa25eb000 r-xp 00000000 08:02 574 /lib/aarch64-linux-gnu/ld-2.21.so 7fa25ef000-7fa25f2000 rw-p 00000000 00:00 0 7fa25f7000-7fa25f9000 rw-p 00000000 00:00 0 7fa25f9000-7fa25fa000 r--p 00000000 00:00 0 [vvar] 7fa25fa000-7fa25fb000 r-xp 00000000 00:00 0 [vdso] 7fa25fb000-7fa25fc000 r--p 0001c000 08:02 574 /lib/aarch64-linux-gnu/ld-2.21.so 7fa25fc000-7fa25fe000 rw-p 0001d000 08:02 574 /lib/aarch64-linux-gnu/ld-2.21.so 7ff2ea8000-7ff2ec9000 rw-p 00000000 00:00 0 [stack] root@linaro-nano:~# Before 'main()' can execute 'libcstest.so.1.0' has to be loaded in memory. Once that has been done perf_event_mmap() has been called 4 times, with the last map starting at address 0x7fa25ce000 and the address filter configured to start filtering when the IP has passed over address 0x0x7fa25ce72c (0x7fa25ce000 + 0x72c). But that is wrong since the code segment for library 'libcstest.so.1.0' as been mapped at 0x7fa25bd000, resulting in traces not being collected. This patch corrects the situation by requesting that address filters be updated only if the mapped event is for a code segment. Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Acked-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1468860187-318-3-git-send-email-mathieu.poirier@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Mathieu Poirier 提交于
Binary file names have to be supplied for both range and start/stop filters but the current code only processes the filename if an address range filter is specified. This code adds processing of the filename for start/stop filters. Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Acked-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1468860187-318-2-git-send-email-mathieu.poirier@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
Vincent reported triggering the WARN_ON_ONCE() in event_function_local(). While thinking through cases I noticed that by using event_function() directly, we miss the inactive case usually handled by event_function_call(). Therefore construct a blend of event_function_call() and event_function() that handles the cases relevant to event_function_local(). Reported-by: NVince Weaver <vincent.weaver@maine.edu> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org # 4.5+ Fixes: fae3fde6 ("perf: Collapse and fix event_function_call() users") Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Jiri Olsa 提交于
Frank reported kernel panic when he disabled several cores in BIOS via following option: Core Disable Bitmap(Hex) [0] with number 0xFFE, which leaves 16 CPUs in system (out of 48). The kernel panic below goes along with following messages: smpboot: Max logical packages: 2^M smpboot: APIC(0) Converting physical 0 to logical package 0^M smpboot: APIC(20) Converting physical 1 to logical package 1^M smpboot: APIC(40) Package 2 exceeds logical package map^M smpboot: CPU 8 APICId 40 disabled^M smpboot: APIC(60) Package 3 exceeds logical package map^M smpboot: CPU 12 APICId 60 disabled^M ... general protection fault: 0000 [#1] SMP^M Modules linked in:^M CPU: 15 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc5+ #1^M Hardware name: SGI UV300/UV300, BIOS SGI UV 300 series BIOS 05/25/2016^M task: ffff8801673e0000 ti: ffff8801673ac000 task.ti: ffff8801673ac000^M RIP: 0010:[<ffffffff81014d54>] [<ffffffff81014d54>] uncore_change_context+0xd4/0x180^M ... [<ffffffff810158ac>] uncore_event_init_cpu+0x6c/0x70^M [<ffffffff81d8c91c>] intel_uncore_init+0x1c2/0x2dd^M [<ffffffff81d8c75a>] ? uncore_cpu_setup+0x17/0x17^M [<ffffffff81002190>] do_one_initcall+0x50/0x190^M [<ffffffff810ab193>] ? parse_args+0x293/0x480^M [<ffffffff81d87365>] kernel_init_freeable+0x1a5/0x249^M [<ffffffff81d86a35>] ? set_debug_rodata+0x12/0x12^M [<ffffffff816dc19e>] kernel_init+0xe/0x110^M [<ffffffff816e93bf>] ret_from_fork+0x1f/0x40^M [<ffffffff816dc190>] ? rest_init+0x80/0x80^M The reason for the panic is wrong value of __max_logical_packages, which lets logical_package_map uninitialized and the uncore code relying on this map being properly initialized (maybe we should add some safety checks there as well). The __max_logical_packages is computed as: DIV_ROUND_UP(total_cpus, ncpus); - ncpus being number of cores With above BIOS setup we get total_cpus == 16 which set __max_logical_packages to 2 (ncpus is 12). Once topology_update_package_map processes CPU with logical pkg over 2 we display above messages and fail to initialize the physical_to_logical_pkg map, which makes the uncore code crash. The fix is to remove logical_package_map bitmap completely and keep and update the logical_packages number instead. After we enumerate all the present CPUs, we check if the enumerated logical packages count is within its computed maximum from BIOS data. If it's not the case, we set this maximum to the new enumerated value and freeze any new addition of logical packages. The freeze is because lot of init code like uncore/rapl/cqm depends on having maximum logical package value set to allocate their data, so we can't change it later on. Prarit Bhargava tested the patch and confirms that it solves the problem: From dmidecode: Core Count: 24 Core Enabled: 24 Thread Count: 48 Orig kernel boot log: [ 0.464981] smpboot: Max logical packages: 19 [ 0.469861] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.477261] smpboot: APIC(40) Converting physical 1 to logical package 1 [ 0.484760] smpboot: APIC(80) Converting physical 2 to logical package 2 [ 0.492258] smpboot: APIC(c0) Converting physical 3 to logical package 3 1. nr_cpus=8, should stop enumerating in package 0: [ 0.533664] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.539596] smpboot: Max logical packages: 19 2. max_cpus=8, should still enumerate all packages: [ 0.526494] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.532428] smpboot: APIC(40) Converting physical 1 to logical package 1 [ 0.538456] smpboot: APIC(80) Converting physical 2 to logical package 2 [ 0.544486] smpboot: APIC(c0) Converting physical 3 to logical package 3 [ 0.550524] smpboot: Max logical packages: 19 3. nr_cpus=49 ( 2 socket + 1 core on 3rd socket), should stop enumerating in package 2: [ 0.521378] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.527314] smpboot: APIC(40) Converting physical 1 to logical package 1 [ 0.533345] smpboot: APIC(80) Converting physical 2 to logical package 2 [ 0.539368] smpboot: Max logical packages: 19 4. maxcpus=49, should still enumerate all packages: [ 0.525591] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.531525] smpboot: APIC(40) Converting physical 1 to logical package 1 [ 0.537547] smpboot: APIC(80) Converting physical 2 to logical package 2 [ 0.543579] smpboot: APIC(c0) Converting physical 3 to logical package 3 [ 0.549624] smpboot: Max logical packages: 19 5. kdump (nr_cpus=1) works as well. Reported-by: NFrank Ramsay <framsay@redhat.com> Tested-by: NPrarit Bhargava <prarit@redhat.com> Signed-off-by: NJiri Olsa <jolsa@kernel.org> Reviewed-by: NPrarit Bhargava <prarit@redhat.com> Acked-by: NPeter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160815101700.GA30090@kravaSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Borislav Petkov 提交于
Similar to: efaad554 ("x86/microcode/intel: Fix initrd loading with CONFIG_RANDOMIZE_MEMORY=y") ... fix microcode loading from the initrd on AMD by adding the randomization offset to the microcode patch container within the initrd. Reported-and-tested-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NBorislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-tip-commits@vger.kernel.org Link: http://lkml.kernel.org/r/20160817113314.GA19221@nazgul.tnicSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Oleg Nesterov 提交于
__replace_page() wronlgy calls mem_cgroup_cancel_charge() in "success" path, it should only do this if page_check_address() fails. This means that every enable/disable leads to unbalanced mem_cgroup_uncharge() from put_page(old_page), it is trivial to underflow the page_counter->count and trigger OOM. Reported-and-tested-by: NBrenden Blanco <bblanco@plumgrid.com> Signed-off-by: NOleg Nesterov <oleg@redhat.com> Reviewed-by: NJohannes Weiner <hannes@cmpxchg.org> Acked-by: NMichal Hocko <mhocko@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: stable@vger.kernel.org # 3.17+ Fixes: 00501b53 ("mm: memcontrol: rewrite charge API") Link: http://lkml.kernel.org/r/20160817153629.GB29724@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
Single 64-bit gart size fix. * 'drm-fixes-4.8' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: Change GART offset to 64-bit
-
由 Rafael J. Wysocki 提交于
* pm-sleep: PM / hibernate: Fix rtree_next_node() to avoid walking off list ends x86/power/64: Use __pa() for physical address computation PM / sleep: Update some system sleep documentation
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Buffers powersave frame test is reversed in cfg80211, fix from Felix Fietkau. 2) Remove bogus WARN_ON in openvswitch, from Jarno Rajahalme. 3) Fix some tg3 ethtool logic bugs, and one that would cause no interrupts to be generated when rx-coalescing is set to 0. From Satish Baddipadige and Siva Reddy Kallam. 4) QLCNIC mailbox corruption and napi budget handling fix from Manish Chopra. 5) Fix fib_trie logic when walking the trie during /proc/net/route output than can access a stale node pointer. From David Forster. 6) Several sctp_diag fixes from Phil Sutter. 7) PAUSE frame handling fixes in mlxsw driver from Ido Schimmel. 8) Checksum fixup fixes in bpf from Daniel Borkmann. 9) Memork leaks in nfnetlink, from Liping Zhang. 10) Use after free in rxrpc, from David Howells. 11) Use after free in new skb_array code of macvtap driver, from Jason Wang. 12) Calipso resource leak, from Colin Ian King. 13) mediatek bug fixes (missing stats sync init, etc.) from Sean Wang. 14) Fix bpf non-linear packet write helpers, from Daniel Borkmann. 15) Fix lockdep splats in macsec, from Sabrina Dubroca. 16) hv_netvsc bug fixes from Vitaly Kuznetsov, mostly to do with VF handling. 17) Various tc-action bug fixes, from CONG Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) net_sched: allow flushing tc police actions net_sched: unify the init logic for act_police net_sched: convert tcf_exts from list to pointer array net_sched: move tc offload macros to pkt_cls.h net_sched: fix a typo in tc_for_each_action() net_sched: remove an unnecessary list_del() net_sched: remove the leftover cleanup_a() mlxsw: spectrum: Allow packets to be trapped from any PG mlxsw: spectrum: Unmap 802.1Q FID before destroying it mlxsw: spectrum: Add missing rollbacks in error path mlxsw: reg: Fix missing op field fill-up mlxsw: spectrum: Trap loop-backed packets mlxsw: spectrum: Add missing packet traps mlxsw: spectrum: Mark port as active before registering it mlxsw: spectrum: Create PVID vPort before registering netdevice mlxsw: spectrum: Remove redundant errors from the code mlxsw: spectrum: Don't return upon error in removal path i40e: check for and deal with non-contiguous TCs ixgbe: Re-enable ability to toggle VLAN filtering ixgbe: Force VLNCTRL.VFE to be set in all VMDq paths ...
-
由 David S. Miller 提交于
Cong Wang says: ==================== net_sched: tc action fixes and updates This patchset fixes a few regressions caused by the previous code refactor and more. Thanks to Jamal for catching them! Note, patch 3/7 and 4/7 are not strictly necessary for this patchset, I just want to carry them together. --- v4: adjust an indention for Jamal add two more patches v3: avoid list for fast path, suggested by Jamal v2: replace flex_array with regular dynamic array keep tcf_action_stats_update() in act_api.h fix macro typos found by Amir ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roman Mashak 提交于
The act_police uses its own code to walk the action hashtable, which leads to that we could not flush standalone tc police actions, so just switch to tcf_generic_walker() like other actions. (Joint work from Roman and Cong.) Signed-off-by: NRoman Mashak <mrv@mojatatu.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
Jamal reported a crash when we create a police action with a specific index, this is because the init logic is not correct, we should always create one for this case. Just unify the logic with other tc actions. Fixes: a03e6fe5 ("act_police: fix a crash during removal") Reported-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
As pointed out by Jamal, an action could be shared by multiple filters, so we can't use list to chain them any more after we get rid of the original tc_action. Instead, we could just save pointers to these actions in tcf_exts, since they are refcount'ed, so convert the list to an array of pointers. The "ugly" part is the action API still accepts list as a parameter, I just introduce a helper function to convert the array of pointers to a list, instead of relying on the C99 feature to iterate the array. Fixes: a85a970a ("net_sched: move tc_action into tcf_common") Reported-by: NJamal Hadi Salim <jhs@mojatatu.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
struct tcf_exts belongs to filters, should not be visible to plain tc actions. Cc: Ido Schimmel <idosch@mellanox.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
It is harmless because all users pass 'a' to this macro. Fixes: 00175aec ("net/sched: Macro instead of CONFIG_NET_CLS_ACT ifdef") Cc: Amir Vadai <amir@vadai.me> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
This list_del() for tc action is not needed actually, because we only use this list to chain bulk operations, therefore should not be carried for latter operations. Fixes: ec0595cc ("net_sched: get rid of struct tcf_common") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
After refactoring tc_action into tcf_common, we no longer need to cleanup temporary "actions" in list, they are permanently stored in the hashtable. Fixes: a85a970a ("net_sched: move tc_action into tcf_common") Reported-by: NJamal Hadi Salim <jhs@mojatatu.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue由 David S. Miller 提交于
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2016-08-16 This series contains fixes to e1000e, igb, ixgbe and i40e. Kshitiz Gupta provides a fix for igb to resolve the PHY delay compensation math in several functions. Jarod Wilson provides a fix for e1000e which had to broken up into 2 patches, first is prepares the driver for expanding the list of NICs that have occasional ~10 hour clock jumps when being used for PTP. Second patch actually fixes i218 silicon which has been experiencing the clock jumps while using PTP. Alex provides 2 patches for ixgbe now that he is back at Intel. First fixes setting VLNCTRL.VFE bit, which was left unchanged in earlier patches which resulted in disabling VLAN filtering for all the VFs. Second corrects the support for disabling the VLAN tag filtering via the feature bit. Lastly, David fixes i40e which was causing a kernel panic when non-contiguous traffic classes or traffic classes not starting with TC0, were configured on a link partner switch. To fix this, changed the logic when determining the total number of TCs enabled. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jiri Pirko says: ==================== mlxsw: IPv4 UC router fixes Ido says: Patches 1-3 fix a long standing problem in the driver's init sequence, which manifests itself quite often when routing daemons try to configure an IP address on registered netdevs that don't yet have an associated vPort. Patches 4-9 add missing packet traps for the router to work properly and also fix ordering issue following the recent changes to the driver's init sequence. The last patch isn't related to the router, but fixes a general problem in which under certain conditions packets aren't trapped to CPU. v1->v2: - Change order of patch 7 - Add patch 6 following Ilan's comment - Add patchset name and cover letter ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
When packets enter the device they are classified to a priority group (PG) buffer based on their PCP value. After their egress port and traffic class are determined they are moved to the switch's shared buffer and await transmission, if: (Ingress{Port}.Usage < Thres && Ingress{Port,PG}.Usage < Thres && Egress{Port}.Usage < Thres && Egress{Port,TC}.Usage < Thres) || (Ingress{Port}.Usage < Min || Ingress{Port,PG} < Min || Egress{Port}.Usage < Min || Egress{Port,TC}.Usage < Min) Packets scheduled to transmission through CPU port (trapped to CPU) use traffic class 7, which has a zero maximum and minimum quotas. However, when such packets arrive from PG 0 they are admitted to the shared buffer as PG 0 has a non-zero minimum quota. Allow all packets to be trapped to the CPU - regardless of the PG they were classified to - by assigning a 10KB minimum quota for CPU port and TC7. Fixes: 8e8dfe9f ("mlxsw: spectrum: Add IEEE 802.1Qaz ETS support") Reported-by: NTamir Winetroub <tamirw@mellanox.com> Tested-by: NTamir Winetroub <tamirw@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
Before destroying the 802.1Q FID we should first remove the VID-to-FID mapping. This makes mlxsw_sp_fid_destroy() symmetric with regards to mlxsw_sp_fid_create(). Fixes: 14d39461 ("mlxsw: spectrum: Use per-FID struct for the VLAN-aware bridge") Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-