Conflicts:
	arch/arm/mach-omap2/cclock3xxx_data.c

Moves clock state to struct clk_core, but takes care to change as little API as
possible.

struct clk_hw still has a pointer to a struct clk, which is the
implementation's per-user clk instance, for backwards compatibility.

The struct clk that clk_get_parent() returns isn't owned by the caller, but by
the clock implementation, so the former shouldn't call clk_put() on it.

Because some boards in mach-omap2 still register clocks statically, their clock
registration had to be updated to take into account that the clock information
is stored in struct clk_core now.
Signed-off-by: NTomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: NStephen Boyd <sboyd@codeaurora.org>
Tested-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>
[mturquette@linaro.org: adapted clk_has_parent to struct clk_core
                        applied OMAP3+ DPLL fix from Tero & Tony]

This is no longer used for anything, thus it can be removed.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

As the clock data is now available for the legacy boot also from the
clock driver, use this rather than the data under the mach folder.
This allows us to get rid of the old clock data completely.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

As the legacy clock data is being moved under clock driver, the
clock data will be using the same low level infrastructure for
register accesses. This requires the clk_memmaps to be initialized
properly. This patch adds a support hook to the PRM driver to
initialize the mappings.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Introduces omap3 legacy clock data under clock driver. The clock data
is also in new format, which makes it possible to get rid of the
clk-private.h header. This patch also introduces SoC specific init
functions that shall be called from the low level init.

The data format used in this file has two possible evolution paths;
it can either be removed completely once no longer needed, or it will
be possible to retain the format and modify the TI clock driver to be
a loadable module at some point. The actual path to be followed
will be decided later.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Legacy clock data is initialized slightly differently compared to
DT clocks, thus add support for this.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Legacy clock data is initialized slightly differently compared to
DT clocks, thus add support for this.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Legacy clock data is initialized slightly differently compared to
DT clocks, thus add support for this.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Legacy clock data is initialized slightly differently compared to
DT clocks, thus add support for this. The interface clock descriptor
itself is overloading the gate clock descriptor, thus it needs to
be called from the gate setup.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Legacy clock data is initialialized slightly differently compared to
DT clocks, thus add support for this.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Legacy clock data is initialized slightly differently compared to
DT clocks, thus add support for this.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Legacy clock data for OMAP3 is being moved under clock driver, thus
base support for this is needed. This patch adds basic definitions for
clock init descriptors and core infrastructure for initialization,
which will be called from the OMAP3 clock init.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

As it has never been used.
Signed-off-by: NTomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

As clk_unprepare_unused_subtree and clk_disable_unused_subtree are
always called with a valid struct clk.
Signed-off-by: NTomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Currently a mix of clk-qoriq/qoriq-clk and no prefix is used
Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Where the memset() is not necessary
Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

drivers/clk/clk-qoriq.c:59:22: warning: symbol 'cmux_ops' was not declared. Should it be static?
Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

WARNING:OOM_MESSAGE: Possible unnecessary 'out of memory' message
+       if (!parent_names) {
+               pr_err("%s: could not allocate parent_names\n", __func__);

WARNING:OOM_MESSAGE: Possible unnecessary 'out of memory' message
+       if (!cmux_clk) {
+               pr_err("%s: could not allocate cmux_clk\n", __func__);

WARNING:OOM_MESSAGE: Possible unnecessary 'out of memory' message
+       if (!subclks) {
+               pr_err("%s: could not allocate subclks\n", __func__);

WARNING:OOM_MESSAGE: Possible unnecessary 'out of memory' message
+       if (!onecell_data) {
+               pr_err("%s: could not allocate onecell_data\n", __func__);
Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

CHECK:ALLOC_SIZEOF_STRUCT: Prefer kzalloc(sizeof(*cmux_clk)...) over kzalloc(sizeof(struct cmux_clk)...)
+       cmux_clk = kzalloc(sizeof(struct cmux_clk), GFP_KERNEL);

CHECK:ALLOC_SIZEOF_STRUCT: Prefer kzalloc(sizeof(*onecell_data)...) over kzalloc(sizeof(struct clk_onecell_data)...)
+       onecell_data = kzalloc(sizeof(struct clk_onecell_data), GFP_KERNEL);
Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

WARNING:ALLOC_WITH_MULTIPLY: Prefer kcalloc over kzalloc with multiply
+       subclks = kzalloc(sizeof(struct clk *) * count, GFP_KERNEL);
Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis
+       rc = of_property_read_string_index(np, "clock-output-names",
+                       0, &clk_name);

CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis
+               pr_err("Could not register clock provider for node:%s\n",
+                        np->name);

CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis
+               rc = of_property_read_string_index(np, "clock-output-names",
+                               i, &clk_name);

CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis
+               pr_err("Could not register clk provider for node:%s\n",
+                        np->name);
Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Move pxa25x clock drivers from arch/arm/mach-pxa to driver/clk.
In the move :
 - convert to new clock framework legacy clocks
 - provide clocks as before for platform data based boards
 - provide clocks through devicetree with clk-pxa-dt
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

The CPU_2X clock does not have a classical in-kernel user, but is,
amongst other things, required for OCM and debug access. Make sure this
clock is not mistakenly disabled during boot up by enabling it in the
platform's clock driver.

Cc: stable@vger.kernel.org # 3.11+
Fixes: 0ee52b15 'clk: zynq: Add clock controller driver'
Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Merge tag 'sunxi-clocks-for-3.20' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next

Allwinner clock changes for 3.20

The set of clock changes for the 3.20 merge window, with mostly:
  - Some PLL fixes for the A80 and A31
  - The MMC custom phase functions are removed, and moved over to the generic
    phase API.
  - Add the A80 MMC clocks

Some DT changes slipped here as well, to preserve bisectability.

Merge tag 'v3.20-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next

The two big changes are the additional of the watchdog clock, which
we currently only "fake" as the clock gate control is living in a
very strange place, but the watchdog driver needs to read the clock
rate from it and the setting of rk3288 plls to slow mode upon suspend.

Other than that some more exported clocks and a CLK_SET_RATE_PARENT
flag for the uart clocks.

These modules don't need to include clk-private.h. Replace the
include with clk.h because these modules are clock consumers and
also include clk-provider.h in clk/ti.h because struct
clk_hw_omap has a struct clk_hw embedded in it.

Cc: Tero Kristo <t-kristo@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Reviewed-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

These drivers don't need to include clk-private.h. Remove the
include.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Acked-by: NUlf Hansson <ulf.hansson@linaro.org>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

The phase setter and getter were not exported until now, which was causing
build breakages when callers were compiled as module. Export these two
functions.
Reported-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Document the LPASS (low power audio subsystem) clock controller
found on Qualcomm devices.

Cc: <devicetree@vger.kernel.org>
Signed-off-by: NRajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: NKumar Gala <galak@codeaurora.org>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Add an LCC driver for MSM8960/APQ8064 that supports the i2s,
slimbus, and pcm clocks.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Tested-by: NKenneth Westfield <kwestfie@codeaurora.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Add an LCC driver for IPQ806x that supports the i2s, S/PDIF, and
pcm clocks.
Signed-off-by: NRajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: NKumar Gala <galak@codeaurora.org>
Signed-off-by: NJosh Cartwright <joshc@codeaurora.org>
[sboyd@codeaurora.org: Reworded commit text, added Kconfig
select, fleshed out Kconfig description a bit more, added pll4
configuration and reworked probe for it, added muxes, split out
dt-binding file]
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Tested-by: NKenneth Westfield <kwestfie@codeaurora.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Add defines to make more human readable numbers for the lpass
clock controller found on IPQ806x SoCs. Also remove the PLL4
define in gcc to avoid #define conflicts because that clock
doesn't exist in gcc, instead it lives in lcc.
Signed-off-by: NRajendra Nayak <rnayak@codeaurora.org>
[sboyd@codeaurora.org: Split off into separate patch]
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Tested-by: NKenneth Westfield <kwestfie@codeaurora.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Add support for muxes that use regmap instead of readl/writel
directly. We don't support as many features as clk-mux.c, but
this is good enough to support getting and setting parents.
Adding a table based lookup can be added in the future if needed.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Tested-by: NKenneth Westfield <kwestfie@codeaurora.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Add support for dividers that use regmap instead of readl/writel.
Signed-off-by: NJosh Cartwright <joshc@codeaurora.org>
Signed-off-by: NRajendra Nayak <rnayak@codeaurora.org>
[sboyd@codeaurora.org: Switch to using generic divider code, drop
enable/disable, reword commit text]
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Tested-by: NKenneth Westfield <kwestfie@codeaurora.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Some devices don't use mmio to interact with dividers. Split out the
logic from the register read/write parts so that we can reuse the
division logic elsewhere.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Tested-by: NKenneth Westfield <kwestfie@codeaurora.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Some clock drivers want to find the closest rate on the input of
a mux instead of a rate that's less than or equal to the desired
rate. Add a generic mux function to support this.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Tested-by: NKenneth Westfield <kwestfie@codeaurora.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Some of the clks can be registered & unregistered before the clk related debugfs
entries are initialized at late_initcall. In the unregister path checking for only
dentry before clk_debug_init() would lead dangling pointers in the debug clk list,
because the list is already populated in register path and the clk pointer freed in
unregister path.
The side effect of not removing it from the list is either a null pointer
dereference or if lucky to boot the system, the number of clk entries in
debugfs disappear.

We could add more checks like if (inited && !clk->dentry) but just removing
the check for dentry made more sense as debugfs_remove_recursive() seems to be
safe with null pointers. This will ensure that the unregistering clk would be
removed from the debug list in all the code paths.

Without this patch kernel would crash with log:
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0204000
[00000000] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 1 PID: 1 Comm: swapper/0 Tainted: G    B          3.19.0-rc3-00007-g412f9ba-dirty #840
Hardware name: Qualcomm (Flattened Device Tree)
task: ed948000 ti: ed944000 task.ti: ed944000
PC is at strlen+0xc/0x40
LR is at __create_file+0x64/0x1dc
pc : [<c04ee604>]    lr : [<c049f1c4>]    psr: 60000013
sp : ed945e40  ip : ed945e50  fp : ed945e4c
r10: 00000000  r9 : c1006094  r8 : 00000000
r7 : 000041ed  r6 : 00000000  r5 : ed4af998  r4 : c11b5e28
r3 : 00000000  r2 : ed945e38  r1 : a0000013  r0 : 00000000
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c5787d  Table: 8020406a  DAC: 00000015
Process swapper/0 (pid: 1, stack limit = 0xed944248)
Stack: (0xed945e40 to 0xed946000)
5e40: ed945e7c ed945e50 c049f1c4 c04ee604 c0fc2fa4 00000000 ecb748c0 c11c2b80
5e60: c0beec04 0000011c c0fc2fa4 00000000 ed945e94 ed945e80 c049f3e0 c049f16c
5e80: 00000000 00000000 ed945eac ed945e98 c08cbc50 c049f3c0 ecb748c0 c11c2b80
5ea0: ed945ed4 ed945eb0 c0fc3080 c08cbc30 c0beec04 c107e1d8 ecdf0600 c107e1d8
5ec0: c107e1d8 ecdf0600 ed945f54 ed945ed8 c0208ed4 c0fc2fb0 c026a784 c04ee628
5ee0: ed945f0c ed945ef0 c0f5d600 c04ee604 c0f5d5ec ef7fcc7d c0b40ecc 0000011c
5f00: ed945f54 ed945f10 c026a994 c0f5d5f8 c04ecc00 00000007 ef7fcc95 00000007
5f20: c0e90744 c0dd0884 ed945f54 c106cde0 00000007 c117f8c0 0000011c c0f5d5ec
5f40: c1006094 c100609c ed945f94 ed945f58 c0f5de34 c0208e50 00000007 00000007
5f60: c0f5d5ec be9b5ae0 00000000 c117f8c0 c0af1680 00000000 00000000 00000000
5f80: 00000000 00000000 ed945fac ed945f98 c0af169c c0f5dd2c ed944000 00000000
5fa0: 00000000 ed945fb0 c020f298 c0af168c 00000000 00000000 00000000 00000000
5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ebcc6d33 bfffca73
[<c04ee604>] (strlen) from [<c049f1c4>] (__create_file+0x64/0x1dc)
[<c049f1c4>] (__create_file) from [<c049f3e0>] (debugfs_create_dir+0x2c/0x34)
[<c049f3e0>] (debugfs_create_dir) from [<c08cbc50>] (clk_debug_create_one+0x2c/0x16c)
[<c08cbc50>] (clk_debug_create_one) from [<c0fc3080>] (clk_debug_init+0xdc/0x144)
[<c0fc3080>] (clk_debug_init) from [<c0208ed4>] (do_one_initcall+0x90/0x1e0)
[<c0208ed4>] (do_one_initcall) from [<c0f5de34>] (kernel_init_freeable+0x114/0x1e0)
[<c0f5de34>] (kernel_init_freeable) from [<c0af169c>] (kernel_init+0x1c/0xfc)
[<c0af169c>] (kernel_init) from [<c020f298>] (ret_from_fork+0x14/0x3c)
Code: c0b40ecc e1a0c00d e92dd800 e24cb004 (e5d02000)
---[ end trace b940e45b5e25c1e7 ]---

Fixes: 6314b679 "clk: Don't hold prepare_lock across debugfs creation"
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Merge branch 'clk-shmobile-for-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next

For all pll-s on sun6i n == 0 means use a multiplier of 1, rather then 0 as
it means on sun4i / sun5i / sun7i. n_start = 1 is already correctly set
for sun6i pll6, but was missing for pll1, this commit fixes this.

Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>