The signal threads may be running concurrently with the GPU reset. The
completion from the GPU run asynchronous with the reset and two threads
may see different snapshots of the state, and the signaler may mark a
request as complete as we try to reset it. We don't tolerate 2 different
views of the same state and complain if we try to mark a request as
failed if it is already complete. Disable the signal threads during
reset to prevent this conflict (even though the conflict implies that
the state we resetting to is invalid, we have already made our
decision!).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99733
References: https://bugs.freedesktop.org/show_bug.cgi?id=99671Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170212172002.23072-4-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>

Disabling the tasklet leaves it if scheduled on the ready to run list
until it is re-enabled. This will leave the ksoftird thread spinning
until satisfied. To prevent this situation on starting the GPU reset, we
want to kill the tasklet first and then disable. The same problem will
arise when a tasklet is scheduled from another device, so a better
solution is required for the general case.
Reported-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 1f7b847d ("drm/i915: Disable engine->irq_tasklet around resets")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170212172002.23072-3-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>

As i915_gem_reset_finish() undoes the steps from
i915_gem_reset_prepare() to leave the system in a fully-working state,
e.g. to be able to free the breadcrumb signal threads, make sure that we
always call it even on the error path.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170212172002.23072-2-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>

As the request is not complete, it should not be signaled. Assert that
this is true before we process the request for a reset.

References: https://bugs.freedesktop.org/show_bug.cgi?id=99671Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170212172002.23072-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>

After a brief discussion, we settled on a naming convention for the
conditional GEM debugging data that should be clearer to the casual
user: GEM_DEBUG
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170207102319.10910-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

When updating the bookkeeping following the reset, we need the seqno to
be coherent on the CPU prior to trusting its result for deciding whether
any request is completed. We need the irq_barrier before we start making
these decisions, i.e. in reset_prepare.

References: https://bugs.freedesktop.org/show_bug.cgi?id=99733Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210185214.23463-1-chris@chris-wilson.co.ukReviewed-by: NMichel Thierry <michel.thierry@intel.com>

As dmabufs may live beyond the PCI device removal, we need to flush the
freed object worker on device release, and include a warning in case
there is a leak.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210163523.17533-3-chris@chris-wilson.co.uk

We may unload the PCI device before all users (such as dma-buf) are
completely shutdown. This may leave VMA in the global GTT which we want
to revoke, whilst keeping the objects themselves around to service the
dma-buf.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210163523.17533-2-chris@chris-wilson.co.uk

We may need to keep our memory management alive after we have unloaded
the physical pci device. For example, if we have exported an object via
dmabuf, that will keep the device around but the pci device may be
removed before the dmabuf itself is released, use of the pci hardware
will be revoked, but the memory and object management needs to persist
for the dmabuf.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210163523.17533-1-chris@chris-wilson.co.uk

This adds a file in i915's debugfs directory that allows userspace to
manually control HPD storm detection. This is mainly for hotplugging
tests, where we might want to test HPD storm functionality or disable
storm detection to speed up hotplugging tests without breaking anything.

Changes since v1:
- Make HPD storm interval configurable
- Misc code cleanup
Signed-off-by: NLyude <lyude@redhat.com>
Acked-by: NJani Nikula <jani.nikula@linux.intel.com>
Cc: Tomeu Vizoso <tomeu@tomeuvizoso.net>

Replace the VLV/CHV check with a HAS_GMCH_DISPLAY check in
intel_fb_pitch_limit(), because it's shorter.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170208175328.11064-1-ville.syrjala@linux.intel.comReviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>

Until recently vlv_steal_power_sequencer() wasn't being called for
normal DP ports, and hence it could assert that it should only be
called for pipe A and B (since pipe C doesn't support eDP). However
that changed when we started to consider normal DP ports as well when
choosing a PPS. So we will now get spurious warnings when
vlv_steal_power_sequencer() does get called for pipe C. Avoid this by
moving the WARN down into vlv_detach_power_sequencer() where this
assertion should still hold.

Cc: Imre Deak <imre.deak@intel.com>
Cc: stable@vger.kernel.org
Fixes: 9f2bdb00 ("drm/i915: Prevent PPS stealing from a normal DP port on VLV/CHV")
References: https://bugs.freedesktop.org/show_bug.cgi?id=95287Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170208175254.10958-1-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com>

Chris Wilson needs the new drm_driver->release callback to make sure
the shiny new dma-buf testcases don't oops the driver on unload.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

[12493.693827] WARNING: CPU: 1 PID: 14860 at drivers/gpu/drm/i915/intel_uncore.c:795 __unclaimed_reg_debug+0x5d/0x80 [i915]
[12493.693868] Unclaimed read from register 0x1f0024
[12493.693905] Modules linked in: vgem i915 drm_kms_helper drm intel_gtt i2c_algo_bit syscopyarea sysfillrect sysimgblt fb_sys_fops prime_numbers intel_powerclamp crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel cryptd lpc_ich i2c_i801 mfd_core video i2c_designware_platform i2c_designware_core i2c_core button autofs4 sd_mod ahci libahci libata scsi_mod [last unloaded: i915]
[12493.694039] CPU: 1 PID: 14860 Comm: intel-gpu-overl Tainted: G     U          4.10.0-rc7+ #11
[12493.694079] Hardware name: GIGABYTE GB-BXBT-1900/MZBAYAB-00, BIOS F8 03/02/2016
[12493.694121] Call Trace:
[12493.694169]  dump_stack+0x67/0x9d
[12493.694235]  __warn+0x117/0x140
[12493.694288]  warn_slowpath_fmt+0x4f/0x60
[12493.694344]  ? do_raw_spin_lock+0x116/0x180
[12493.694533]  ? check_for_unclaimed_mmio+0x98/0xe0 [i915]
[12493.694727]  __unclaimed_reg_debug+0x5d/0x80 [i915]
[12493.694923]  fwtable_read32+0x2c5/0x330 [i915]
[12493.695108]  i915_interrupt_info+0xd52/0xf80 [i915]
[12493.695302]  ? gen6_write16+0x310/0x310 [i915]
[12493.695357]  seq_read+0x187/0x710
[12493.695412]  full_proxy_read+0x75/0xc0
[12493.695472]  __vfs_read+0x5a/0x220
[12493.695524]  ? kmem_cache_free+0x6c/0x260
[12493.695577]  ? putname+0x97/0xa0
[12493.695629]  ? putname+0x97/0xa0
[12493.695682]  ? rcu_read_lock_sched_held+0xb8/0xd0
[12493.695735]  ? rw_verify_area+0x65/0x140
[12493.695787]  vfs_read+0xd1/0x1f0
[12493.695840]  SyS_read+0x62/0xc0
[12493.695893]  entry_SYSCALL_64_fastpath+0x1c/0xb1
[12493.695943] RIP: 0033:0x7f82dca99ba0
[12493.695985] RSP: 002b:00007ffc0bdfd4f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[12493.696031] RAX: ffffffffffffffda RBX: 00007ffc0be005a0 RCX: 00007f82dca99ba0
[12493.696073] RDX: 0000000000001fff RSI: 00007ffc0bdfd500 RDI: 000000000000001a
[12493.696115] RBP: ffffffff810fb639 R08: 302f6972642f6775 R09: 00007f82dca0999a
[12493.696157] R10: 00007f82dcd62760 R11: 0000000000000246 R12: ffff880069a17f98
[12493.696199] R13: 00007ffc0bdfd428 R14: 0000000000000003 R15: 00007ffc0bdfd428
[12493.696250]  ? trace_hardirqs_off_caller+0xd9/0x130
[12493.696300] ---[ end trace 52ccf4d39793cc59 ]---

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99761Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210133632.16946-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>

Now that we have fast top-down insertion into the drm_mm, we can use it
for frequent runtime operations like insertion of the context object,
whereas before we limited it to the one-off insertion of the pinned
kernel context. Keeping the active context objects out of the mappable
region of the global GTT (except under memory pressure) improves our
ability to allocate mappable aperture region without triggering a GPU
stall.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210101422.1598-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>

The function intel_ddi_get_link_dpll() was added in f169660e
("drm/i915/dp: Add a standalone function to obtain shared dpll for
HSW/BDW/SKL/BXT") to "allow for the implementation of a platform
neutral upfront link training function", but such implementation
never landed.

So remove that function and clean up the exported shared DPLL interface.

Fixes: f169660e ("drm/i915/dp: Add a standalone function to obtain shared dpll for HSW/BDW/SKL/BXT")
Cc: Durgadoss R <durgadoss.r@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484310032-1863-1-git-send-email-ander.conselvan.de.oliveira@intel.com

There are currently 30 power domains, which puts us pretty close to the
limit with 32 bit masks. Prepare for the future and increase the limit
to 64 bit.

v2: Rebase
v3: s/unsigned long long/u64/ (Joonas)
    Allow the 64th bit of the mask to be used. (Joonas)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170209093121.24410-1-ander.conselvan.de.oliveira@intel.com

Some additional fixes for 4.11.  Delayed a bit due to Chinese New Year. Highlights:
- Powerplay fixes
- VCE and UVD powergating fixes
- Clean up amdgpu SI gfx code to match CI and VI
- Misc bug fixes

* 'drm-next-4.11' of git://people.freedesktop.org/~agd5f/linux: (30 commits)
  drm/amdgpu: report the number of bytes moved at buffer creation
  drm/amdgpu: fix a potential deadlock in amdgpu_bo_create_restricted()
  drm/amdgpu: add support for new smc firmware on polaris
  drm/amd/powerplay: refine code to avoid potential bug that the memory not cleared.
  drm/amdgpu: shut up #warning for compile testing
  drm/amdgpu/virt: fix double kfree on bo_va
  drm/radeon: remove some dead code
  drm/radeon: avoid kernel segfault in vce when gpu fails to resume
  drm/amd/powerplay: set fan speed to max in profile peak mode only.
  drm/amd/gfx6: update gb_addr_config
  drm/amdgpu: update HAINAN_GB_ADDR_CONFIG_GOLDEN
  drm/amdgpu: update VERDE_GB_ADDR_CONFIG_GOLDEN
  drm/amdgpu: refine si_read_register
  drm/amdgpu/gfx6: clean up spi configuration
  drm/amdgpu/gfx6: clean up cu configuration
  drm/amdgpu/gfx6: clean up rb configuration
  drm/amdgpu: refine vce3.0 code and related powerplay pg code.
  drm/amdgpu: move subfunctions to the front of vce_v2_0.c.
  drm/amdgpu: enable vce pg feature on Kv.
  drm/amdgpu: refine code for VCE2.0 and related dpm code.
  ...

two minor fixes.

* tag 'drm-fsl-dcu-for-v4.11' of http://git.agner.ch/git/linux-drm-fsl-dcu:
  drm/fsl-dcu: check for clk_prepare_enable() error
  drm/fsl-dcu: remove unneeded 'ret' assignment

Merge tag 'drm-misc-next-fixes-2017-02-09' of git://anongit.freedesktop.org/git/drm-misc into drm-next

Just 3 bugfixes for 4.11 merge window:

- fbdev module unload oops fix from Chris
- patch from Dan that look really dangers, better safe than sorry

* tag 'drm-misc-next-fixes-2017-02-09' of git://anongit.freedesktop.org/git/drm-misc:
  drm/atomic: fix an error code in mode_fixup()
  drm: Cancel drm_fb_helper_resume_work on unload
  drm: Cancel drm_fb_helper_dirty_work on unload

Once the address space has been created (using 3 or 4 levels of page
tables), we should use that to program the appropriate type into the
contexts. This gives us the flexibility to handle different types of
address spaces at runtime.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170209144036.23664-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>

Like ttm_bo_validate(), ttm_bo_init() might need to move BO and
the number of bytes moved by TTM should be reported. This can help
the throttle buffer migration mechanism to make a better decision.

v2: fix computation
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When ttm_bo_init() fails, the reservation mutex should be unlocked.

In debug build, the kernel reported "possible recursive locking
detected" in this codepath. For debugging purposes, I also added
a "WARN_ON(ww_mutex_is_locked())" when ttm_bo_init() fails and the
mutex was locked as expected.

This should fix (random) GPU hangs. The easy way to reproduce the
issue is to change the "Super Sampling" option from 1.0 to 2.0 in
Hitman. It will create a huge buffer, evict a bunch of buffers
(around ~5k) and deadlock.

This regression has been introduced pretty recently.

v2: only release the mutex if resv is NULL

Fixes: 12a852219583 ("drm/amdgpu: improve AMDGPU_GEM_CREATE_VRAM_CLEARED handling (v2)")
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Some polaris variants require new smc firmware.
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

i915 is pretty much feature complete. Support for atomic i915-specific
connector properties is still missing; those properties can (for now)
only be set through the legacy ioctl.

ILK style watermarks and gen9+ watermarks are handled atomically,
and nonblocking modesets work. FBC has also been made to work with
atomic.

gen4x- and vlv/chv watermarks still need to be fixed, so disable atomic
by default there for now.

Flip the switch!!
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lyude <cpaul@redhat.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486021302-24910-1-git-send-email-maarten.lankhorst@linux.intel.com
[mlankhorst: Fix checkpatch warning about extra space in match_info]
Acked-by: NDaniel Stone <daniel@fooishbar.org>
Reviewed-by: NLyude <lyude@redhat.com>

__create_hw_context can use a good counterpart.
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1486640065-13695-1-git-send-email-joonas.lahtinen@linux.intel.com

The aliasing_ppgtt is just a container for the HW context that mirrors
the global gtt. It should never be used directly, so assert if we make
the mistake of trying to allocate a VMA for it.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170209111933.12420-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

We first wait for a request to be submitted to hw and assigned a seqno,
before we can wait for the hw to signal completion (otherwise we don't
know the hw id we need to wait upon). Whilst waiting for the request to
be submitted, we may exceed the user's timeout and need to propagate the
error back.

v2: Make ETIME into an error from wait_for_execute for consistent exit
handling.
Reported-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 4680816b ("drm/i915: Wait first for submission, before waiting for request completion")
Testcase: igt/gem_wait/basic-await
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/20170208181238.7232-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

This patch makes PPGTT page table non-shrinkable when using aliasing PPGTT
mode. It's just a temporary solution for making GVT-g work.

Fixes: 2ce5179f ("drm/i915/gtt: Free unused lower-level page tables")
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhiyuan Lv <zhiyuan.lv@intel.com>
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486559013-25251-2-git-send-email-zhi.a.wang@intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+
Cc: stable@vger.kernel.org
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

This shaves a few lines from intel_dp_init_connector() and will serve as
a good place to add other port specific information in a follow up
patch.

While at it, convert BUG() to MISSING_CASE() in the default case.

v2: s/BUG/MISSING_CASE. (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170203140316.20792-2-ander.conselvan.de.oliveira@intel.com

Remove workaround for swapped HPD pins in broxton A stepping, which is
pre-production hardware.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170203140316.20792-1-ander.conselvan.de.oliveira@intel.com

My randconfig tests on linux-next showed a newly introduced warning:

drivers/gpu/drm/amd/amdgpu/amdgpu_object.c: In function 'amdgpu_bo_create_restricted':
drivers/gpu/drm/amd/amdgpu/amdgpu_object.c:377:2: error: #warning Please enable CONFIG_MTRR and CONFIG_X86_PAT for better performance thanks to write-combining [-Werror=cpp]

Generally speaking, warnings about bad kernel configuration are not particularly
helpful. We could enforce the selection of X86_PAT through Kconfig, so the driver
cannot even be used unless it is enabled, or we could just rely on the runtime
warning that is also there.

In this version, I'm making the warning conditional on CONFIG_COMPILE_TEST, which
shuts it up for me, but not people that may actually want to run the kernel
as a compromize.

Fixes: a2e2f299 ("drm/amdgpu: Bring bo creation in line with radeon driver (v2)")
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

bo_va is being kfree'd twice, once in the call to amdgpu_vm_bo_rmv
and then a short while later. Fix this double free by removing
the 2nd kfree.

Detected by CoverityScan, CID#1399524 ("Double Free")
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If "rdev->bios" is NULL then we don't need to free it.
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When GPU fails to resume we can not trust that value we write to GPU
memory will post and we might get garbage (more like 0xffffffff on
x86) when reading them back. This trigger out of range memory access
in the kernel inside the vce resume code path.

This patch use canonical value to compute offset instead of reading
back value from GPU memory.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NJérôme Glisse <jglisse@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NFlora Cui <Flora.Cui@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NFlora Cui <Flora.Cui@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NFlora Cui <Flora.Cui@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>