- 07 8月, 2017 1 次提交
-
-
由 Alexandru Gagniuc 提交于
Signed-off-by: NAlexandru Gagniuc <alex.g@adaptrum.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 8月, 2017 1 次提交
-
-
由 Thomas Petazzoni 提交于
The PPv2.2 unit has several interrupts used for TX completion notification. This commit updates the Device Tree binding describing this HW block to mention such interrupts. While at it, we update the example to use a recent Device Tree example, that uses interrupts going through the ICU, and not to the GIC directly. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 8月, 2017 1 次提交
-
-
由 stephen hemminger 提交于
Add some background documentation on netvsc device options and limitations. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 8月, 2017 2 次提交
-
-
由 Sean Wang 提交于
The patch adds the supplements in the dt-binding document for MediaTek MT7622 SoC with extra SGMII system controller and relevant clock consumers listed as the requirements for those SoCs equipped with the SGMII circuit. Also, add the missing binding information for MT7623 SoC here which relies on the fallback binding of MT2701. Signed-off-by: NSean Wang <sean.wang@mediatek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Generalize strparser from more than just being used in conjunction with read_sock. strparser will also be used in the send path with zero proxy. The primary change is to create strp_process function that performs the critical processing on skbs. The documentation is also updated to reflect the new uses. Signed-off-by: NTom Herbert <tom@quantonium.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 8月, 2017 2 次提交
-
-
由 Jan Kiszka 提交于
The device-specific property should be prefixed with the vendor name, not "linux,", as Linus Walleij pointed out. Change this and document the bindings of this platform device. We didn't ship the old binding in a release yet. So we can still change it without breaking an official API. Fixes: 380b1e2f ("gpio-exar/8250-exar: Make set of exported GPIOs configurable") Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Florian Westphal 提交于
Was only checked by the removed prequeue code. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 7月, 2017 1 次提交
-
-
由 Sven Eckelmann 提交于
Converting the freeform text to parsable reStructuredText, allows the integration in the sphinx based documentation system of the kernel. It will therefore be accessible as hypertext under https://www.kernel.org/doc/html/latest/Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
-
- 28 7月, 2017 2 次提交
-
-
由 Johan Hovold 提交于
Since commit a8636c89 (PM / Runtime: Don't allow to suspend a device with an active child) it is no longer permitted to set RPM_SUSPENDED state for a device with active children unless power.ignore_children is set. Update the documentation to reflect this. Signed-off-by: NJohan Hovold <johan@kernel.org> Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Rafael J. Wysocki 提交于
Add a description of the cpuinfo_cur_freq policy attribute in sysfs to the cpufreq documentation under Documentation/admin-guide/pm/ as it is missing after commit 2a0e4927 (cpufreq: User/admin documentation update and consolidation) that overlooked it. Fixes: 2a0e4927 (cpufreq: User/admin documentation update and consolidation) Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
-
- 27 7月, 2017 1 次提交
-
-
由 Shawn Lin 提交于
dwmmc host driver already deprecate it in the driver but didn't modify the documentation to reflect the fact. This patch deprecates it and clean up num-slots from the examples of all variant host drivers. Signed-off-by: NShawn Lin <shawn.lin@rock-chips.com> Acked-by: NJaehoon Chung <jh80.chung@samsung.com> Acked-by: NRob Herring <robh@kernel.org> Fixes: d30a8f7b ("mmc: dw_mmc: deprecated the "num-slots" property") Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
-
- 26 7月, 2017 4 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Sending patches with SVG files via e-mail has a drawback: line size could be bigger than 998, with is the limit given by RFC 5322[1]. So, we need to enforce a lower limit, in order to allow those patches to be properly reviewed. [1] https://tools.ietf.org/html/rfc5322#section-2.1.1 So, use this small Perl script to limit columns size to ~900. use Text::Wrap; $Text::Wrap::columns = 900; $t.=$_ while (<>); print wrap("","",$t); Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Debian's ImageMagick is currently unable to decode those images. Use scour to simplify the SVG, and provide only one font type, in order to make it more palatable. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
This file is too big, with cause it to require a lot of memory when parsed by texlive. Optimize it, in order to avoid the need of touching at main_memory at texmf.cnf. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Heinz Mauelshagen 提交于
Bumo dm-raid target version to 1.12.1 to reflect that commit cc27b0c7 ("md: fix deadlock between mddev_suspend() and md_write_start()") is available. This version change allows userspace to detect that MD fix is available. Signed-off-by: NHeinz Mauelshagen <heinzm@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
- 20 7月, 2017 1 次提交
-
-
由 Arun Parameswaran 提交于
Add SoC specific compatibility strings to the Broadcom DTE based PTP clock binding document. Fixed the document heading and node name. Fixes: 80d60761 ("dt-binding: ptp: add bindings document for dte based ptp clock") Signed-off-by: NArun Parameswaran <arun.parameswaran@broadcom.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 7月, 2017 1 次提交
-
-
由 Florian Westphal 提交于
revert c386578f ("xfrm: Let the flowcache handle its size by default."). Once we remove flow cache, we don't have a flow cache limit anymore. We must not allow (virtually) unlimited allocations of xfrm dst entries. Revert back to the old xfrm dst gc limits. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 7月, 2017 1 次提交
-
-
由 Antoine Ténart 提交于
The dma-mask property is broken and was removed in the device trees having a safexcel-eip197 node and in the safexcel cryptographic driver. This patch removes the dma-mask property from the documentation as well. Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 17 7月, 2017 4 次提交
-
-
由 Biju Das 提交于
Add a new compatible string for the RZ/G1M (R8A7743) SoC. Signed-off-by: NBiju Das <biju.das@bp.renesas.com> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alvaro G. M 提交于
Keep supporting proprietary "xlnx,phy-type" attribute and add support for MII connectivity to the PHY. Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NAlvaro Gamez Machado <alvaro.gamez@hazent.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Frank Wang 提交于
As the comments from Heiko Stuebner <heiko@sntech.de> that compatible should not contain any placeholders, this patch fix it for rk3228 SoC. Note that this is a fix for v4.13, due to fixing the current non-standard binding name that should not become part of an official kernel release. Signed-off-by: NFrank Wang <frank.wang@rock-chips.com> Acked-by: NRob Herring <robh@kernel.org> Reviewed-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
This reverts commit a3015aff as there are complaints that it is incorrect. Reported-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Nandor Han <nandor.han@ge.com> Cc: Romain Perier <romain.perier@collabora.com> Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
-
- 16 7月, 2017 3 次提交
-
-
由 Heiko Stuebner 提交于
The binding rightfully only specifies compatibles for actual implementations and not for the whole family. In the example an arm,mali-midgard slipped through from downstream devicetrees though. So drop that to not confuse people reading (or copying) that example. Signed-off-by: NHeiko Stuebner <heiko@sntech.de> Acked-by: NRob Herring <robh@kernel.org>
-
由 Florian Fainelli 提交于
Commit 07d4510f ("dt-bindings: net: bgmac: add bindings documentation for bgmac") added both brcm,amac-nsp.txt and brcm,bgmac-nsp.txt. The former is actually the one that got updated and is in use by the bgmac driver while the latter is duplicating the former and is not used nor updated. Fixes: 07d4510f ("dt-bindings: net: bgmac: add bindings documentation for bgmac") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Abhishek Shah 提交于
Specifying IDM register space in DT is not mendatory for SoCs where firmware takes care of IDM operations. This patch updates BGMAC driver's DT binding documentation indicating the same. Signed-off-by: NAbhishek Shah <abhishek.shah@broadcom.com> Reviewed-by: NRay Jui <ray.jui@broadcom.com> Reviewed-by: NOza Oza <oza.oza@broadcom.com> Reviewed-by: NScott Branden <scott.branden@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 7月, 2017 15 次提交
-
-
由 Simon Horman 提交于
Add fallback compatibility string for R-Car Gen 2 and 3. In the case of Renesas R-Car hardware we know that there are generations of SoCs, e.g. Gen 1 and 2. But beyond that its not clear what the relationship between IP blocks might be. For example, I believe that r8a7790 is older than r8a7791 but that doesn't imply that the latter is a descendant of the former or vice versa. We can, however, by examining the documentation and behaviour of the hardware at run-time observe that the current driver implementation appears to be compatible with the IP blocks on SoCs within a given generation. For the above reasons and convenience when enabling new SoCs a per-generation fallback compatibility string scheme being adopted for drivers for Renesas SoCs. Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Acked-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Akinobu Mita 提交于
fail-nth interface is only created in /proc/self/task/<current-tid>/. This change also adds it in /proc/<pid>/. This makes shell based tool a bit simpler. $ bash -c "builtin echo 100 > /proc/self/fail-nth && exec ls /" Link: http://lkml.kernel.org/r/1491490561-10485-6-git-send-email-akinobu.mita@gmail.comSigned-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Akinobu Mita 提交于
The read interface for fail-nth looks a bit odd. Read from this file returns "NYYYY..." or "YYYYY..." (this makes me surprise when cat this file). Because there is no EOF condition. The first character indicates current->fail_nth is zero or not, and then current->fail_nth is reset to zero. Just returning task->fail_nth value is more natural to understand. Link: http://lkml.kernel.org/r/1491490561-10485-4-git-send-email-akinobu.mita@gmail.comSigned-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Akinobu Mita 提交于
The value written to fail-nth file is parsed as 0-based. Parsing as one-based is more natural to understand and it enables to cancel the previous setup by simply writing '0'. This change also converts task->fail_nth from signed to unsigned int. Link: http://lkml.kernel.org/r/1491490561-10485-3-git-send-email-akinobu.mita@gmail.comSigned-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mauro Carvalho Chehab 提交于
The notes at the end of this file start with a blank space, instead of a blank line, violating ReST format. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
由 Mauro Carvalho Chehab 提交于
Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - adjust identation of titles; - mark ascii artwork as a literal block; - adjust references. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
由 Mauro Carvalho Chehab 提交于
Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - Comment the internal index; - Use :Date: and :Author: for authorship; - Mark titles; - Mark literal blocks; - Adjust witespaces; - Mark notes; - Use table notation for the existing tables. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
由 Mauro Carvalho Chehab 提交于
Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx. Currently, the document is completely unformatted. Add titles, do indentation, mark literal blocks. Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
由 Mauro Carvalho Chehab 提交于
Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - Use right marks for titles; - Use authorship marks; - Mark literals and literal blocks; - Use autonumbered list for references. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
由 Mauro Carvalho Chehab 提交于
Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - Use marks for titles; - Adjust indentation. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
由 Mauro Carvalho Chehab 提交于
Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - Adjust indentation; - Mark authorship; - Comment internal contents table; - Mark literal blocks; - Don't use all-upercase titles. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
由 Mauro Carvalho Chehab 提交于
Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - adjust title marks; - use footnote marks; - mark literal blocks; - adjust identation. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
由 Mauro Carvalho Chehab 提交于
Each text file under Documentation follows a different format. Some doesn't even have titles! In this specific document, the title, copyright and authorship are added as if it were a C file! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - convert document preambule to the proper format; - mark literal blocks; - adjust identation; - use numbered lists for references. Reviewed by: Kirti Wankhede <kwankhede@nvidia.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
由 Mauro Carvalho Chehab 提交于
Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - promote document title one level; - use markups for authorship and put it at the beginning; - mark literal blocks; - adjust identation. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
由 Mauro Carvalho Chehab 提交于
Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - promote document title one level; - mark literal blocks; - move authorship to the beginning of the file and use markups. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-