- 20 4月, 2008 5 次提交
-
-
由 Trond Myklebust 提交于
In the case of readpage() we need to ensure that the pages get unlocked, and that the error is flagged. In the case of O_DIRECT, we need to ensure that the pages are all released. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
It is possible for nfs_wb_page() to sometimes exit with 0 return value, yet the page is left in a dirty state. For instance in the case where the server rebooted, and the COMMIT request failed, then all the previously "clean" pages which were cached by the server, but were not guaranteed to have been writted out to disk, have to be redirtied and resent to the server. The fix is to have nfs_wb_page_priority() check that the page is clean before it exits... This fixes a condition that triggers the BUG_ON(PagePrivate(page)) in nfs_create_request() when we're in the nfs_readpage() path. Also eliminate a redundant BUG_ON(!PageLocked(page)) while we're at it. It turns out that clear_page_dirty_for_io() has the exact same test. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
..and always destroy using a 'soft' RPC call. Destroying GSS credentials isn't mandatory; the server can always cope with a few credentials not getting destroyed in a timely fashion. This actually fixes a hang situation. Basically, some servers will decide that the client is crazy if it tries to destroy an RPC context for which they have sent an RPCSEC_GSS_CREDPROBLEM, and so will refuse to talk to it for a while. The regression therefor probably was introduced by commit 0df7fb74. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The rest of the networking layer uses SOCK_ASYNC_NOSPACE to signal whether or not we have someone waiting for buffer memory. Convert the SUNRPC layer to use the same idiom. Remove the unlikely()s in xs_udp_write_space and xs_tcp_write_space. In fact, the most common case will be that there is nobody waiting for buffer space. SOCK_NOSPACE is there to tell the TCP layer whether or not the cwnd was limited by the application window. Ensure that we follow the same idiom as the rest of the networking layer here too. Finally, ensure that we clear SOCK_ASYNC_NOSPACE once we wake up, so that write_space() doesn't keep waking things up on xprt->pending. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
call_verify() can, under certain circumstances, free the RPC slot. In that case, our cached pointer 'req = task->tk_rqstp' is invalid. Bug was introduced in commit 220bcc2a (SUNRPC: Don't call xprt_release in call refresh). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 20 3月, 2008 24 次提交
-
-
由 Chuck Lever 提交于
Clean up: refactor the encoding of the opaque 16-byte private argument in xdr_encode_mon(). This will be updated later to support IPv6 addresses. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Switch to using the new mon_id encoder function. Now that we've refactored the encoding of SM_MON requests, we've discovered that the pre-computed buffer length maximums are incorrect! Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: document the argument type that xdr_encode_common() is marshalling by introducing a new function. The new function will replace xdr_encode_common() in just a sec. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: introduce a new XDR encoder specifically for the my_id argument of SM_MON requests. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: introduce a new XDR encoder specifically for the mon_name argument of SM_MON requests. This will be updated later to support IPv6 addresses in addition to IPv4 addresses. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Introduce a special helper function to check the length of NSM strings before they are placed on the wire. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean-up: replace __inline__ and use up-to-date function declaration conventions. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: RPC protocol version numbers are u32. Make sure we use an appropriate type for NLM version numbers when calling nlm_lookup_host(). Eliminates a harmless mixed sign comparison in nlm_host_lookup(). Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Bruce Fields says: "By the way, we've got another config-related nit here: http://bugzilla.linux-nfs.org/show_bug.cgi?id=156 You can build lockd without CONFIG_SYSCTL set, but then the module will fail to load." For now, disable the sysctl registration calls in lockd if CONFIG_SYSCTL is not enabled. This allows the kernel to build properly if PROC_FS or SYSCTL is not enabled, but an NFS client is desired. In the long run, we would like to be able to build the kernel with an NFS client but without lockd. This makes sense, for example, if you want an NFSv4-only NFS client, as NFSv4 doesn't use NLM at all. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Most distros will want support for rpcbind protocols 3 and 4 to default off until they have integrated user-space support for the new rpcbind daemon which supports IPv6 RPC services. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: refresh the help text for Kconfig items related to the sunrpc module. Remove obsolete URLs, and make the language consistent among the options. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Since O_DIRECT is a standard feature that is enabled in most distros, eliminate the CONFIG_NFS_DIRECTIO build option, and change the fs/nfs/Makefile to always build in the NFS direct I/O engine. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Display all mount options in /proc/mount which may be needed to reconstruct a previous mount. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Save the value of the mountproto= mountport= mountvers= and mountaddr= options so that these values can be displayed later via nfs_show_options(). This preserves the intent of the original mount options, should the file system need to be remounted based on what's displayed in /proc/mounts. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
During a remount based on the mount options displayed in /proc/mounts, we want to preserve the original behavior of the mount request. Let's save the original setting of the "port=" mount option in the mount's nfs_server structure. This allows us to simplify the default behavior of port setting for NFSv4 mounts: by default, NFSv2/3 mounts first try an RPC bind to determine the NFS server's port, unless the user specified the "port=" mount option; Users can force the client to skip the RPC bind by explicitly specifying "port=<value>". NFSv4, by contrast, assumes the NFS server port is 2049 and skips the RPC bind, unless the user specifies "port=". Users can force an RPC bind for NFSv4 by explicitly specifying "port=0". I added a couple of extra comments to clarify this behavior. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: make data types of fields in nfs_parsed_mount_options more consistent with other uses. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: use %u instead of %d when displaying NFS mount options. Nit: Fix reporting of "namlen=" option in nfs_show_mount_stats. The mount option is called "namlen" without the "e". Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jeff Layton 提交于
Currently, the NFS readdir decoders have a workaround for buggy servers that send an empty readdir response with the EOF bit unset. If the server sends a malformed response in some cases, this workaround kicks in and just returns an empty response rather than returning a proper error to the caller. This patch does 3 things: 1) have malformed responses with no entries return error (-EIO) 2) preserve existing workaround for servers that send empty responses with the EOF marker unset. 3) Add some comments to clarify the logic in decode_readdir(). Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jeff Layton 提交于
Currently, the NFS readdir decoders have a workaround for buggy servers that send an empty readdir response with the EOF bit unset. If the server sends a malformed response in some cases, this workaround kicks in and just returns an empty response rather than returning a proper error to the caller. This patch does 3 things: 1) have malformed responses with no entries return error (-EIO) 2) preserve existing workaround for servers that send empty responses with the EOF marker unset. 3) Add some comments to clarify the logic in nfs3_xdr_readdirres(). Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jeff Layton 提交于
Currently, the NFS readdir decoders have a workaround for buggy servers that send an empty readdir response with the EOF bit unset. If the server sends a malformed response in some cases, this workaround kicks in and just returns an empty response rather than returning a proper error to the caller. This patch does 3 things: 1) have malformed responses with no entries return error (-EIO) 2) preserve existing workaround for servers that send empty responses with the EOF marker unset. 3) Add some comments to clarify the logic in nfs_xdr_readdirres(). Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred 提交于
Both flush functions have the same error handling routine. Pull it out as a function. Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
-
由 Fred Isaman 提交于
Ignoring the return value from nfs_pageio_add_request can cause deadlocks. In read path: call nfs_pageio_add_request from readpage_async_filler assume at this point that there are requests already in desc, that can't be merged with the current request. so nfs_pageio_doio is fired up to clear out desc. assume something goes wrong in setting up the io, so desc->pg_error is set. This causes nfs_pageio_add_request to return 0, *WITHOUT* adding the original request. BUT, since return code is ignored, readpage_async_filler assumes it has been added, and does nothing further, leaving page locked. do_generic_mapping_read will eventually call lock_page, resulting in deadlock In write path: page is marked dirty by generic_perform_write nfs_writepages is called call nfs_pageio_add_request from nfs_page_async_flush assume at this point that there are requests already in desc, that can't be merged with the current request. so nfs_pageio_doio is fired up to clear out desc. assume something goes wrong in setting up the io, so desc->pg_error is set. This causes nfs_page_async_flush to return 0, *WITHOUT* adding the original request, yet marking the request as locked (PG_BUSY) and in writeback, clearing dirty marks. The next time a write is done to the page, deadlock will result as nfs_write_end calls nfs_update_request Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 19 3月, 2008 11 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: async_tx: avoid the async xor_zero_sum path when src_cnt > device->max_xor fsldma: Fix the DMA halt when using DMA_INTERRUPT async_tx transfer.
-
由 Alexey Starikovskiy 提交于
This reverts commit 2c81ce4c. It caused several new troubles (eg suspend slowdown bisected down to this patch by Pavel Machek), so just revert it for now. Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de> Cc: Pavel Machek <pavel@suse.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel: sched: tune multi-core idle balancing sched: retune wake granularity sched: wakeup-buddy tasks are cache-hot sched: improve affine wakeups sched, net: socket wakeups are sync sched: clean up wakeup balancing, code flow sched: clean up wakeup balancing, rename variables sched: clean up wakeup balancing, move wake_affine()
-
由 Linus Torvalds 提交于
Now that we handle all the special commands using REQ_TYPE_ATA_TASKFILE rather than using the old REQ_TYPE_ATA_CMD model, we need to also emulate the lack of full taskfile data that comes with the old command model (ie when commands are generated with the HDIO_DRIVE_CMD ioctl rather than using the HDIO_DRIVE_TASK[FILE] ioctls). In particular, this means that we should handle command completion the more relaxed way that the old drive_cmd_intr() code did. It allows commands to finish early even if they don't use up all the data that we thought we had for them. This fixes a regression seen by Anders Eriksson where some SMART commands sent by smartd would cause a boot-time system hang on his machine because the IDE command handling code didn't realize that the command had completed. Tested-by: NAnders Eriksson <aeriksson@fastmail.fm> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/christoph/vm由 Linus Torvalds 提交于
* 'slab-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/christoph/vm: slub page alloc fallback: Enable interrupts for GFP_WAIT.
-
由 Ingo Molnar 提交于
WAKE_IDLE is too agressive on multi-core CPUs with the new wake-affine code, keep it on for SMT/HT balancing alone (where there's no cache affinity at all between logical CPUs). Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
reduce wake-up granularity for better interactivity. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Wakeup-buddy tasks are cache-hot - this makes it a bit harder for the load-balancer to tear them apart. (but it's still possible, if the load is sufficiently assymetric) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
improve affine wakeups. Maintain the 'overlap' metric based on CFS's sum_exec_runtime - which means the amount of time a task executes after it wakes up some other task. Use the 'overlap' for the wakeup decisions: if the 'overlap' is short, it means there's strong workload coupling between this task and the woken up task. If the 'overlap' is large then the workload is decoupled and the scheduler will move them to separate CPUs more easily. ( Also slightly move the preempt_check within try_to_wake_up() - this has no effect on functionality but allows 'early wakeups' (for still-on-rq tasks) to be correctly accounted as well.) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
'sync' wakeups are a hint towards the scheduler that (certain) networking related wakeups likely create coupling between tasks. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Clean up the code flow. No code changed: kernel/sched.o: text data bss dec hex filename 42521 2858 232 45611 b22b sched.o.before 42521 2858 232 45611 b22b sched.o.after md5: 09b31c44e9aff8666f72773dc433e2df sched.o.before.asm 09b31c44e9aff8666f72773dc433e2df sched.o.after.asm Signed-off-by: NIngo Molnar <mingo@elte.hu>
-